Adrian Chadd 9a4cf01f45 Add Atheros AR1111 support to the HAL. ... This seems to probe/attach as an AR9485 and thus nothing else besides adding the device id seems to be required. ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: AR9485 mac 576.1 RF5110 phy 1926.8 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 The NIC I have here is a 1 antenna, 2GHz only device. Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC. Tested: * AR1111 (pretending not to be an AR9485, but failing miserably); STA mode with powersave. Relnotes: yes Sponsored by: Netgate		2014-05-05 07:58:05 +00:00
..
ah_regdomain	PicoStation M2HP presents reg domain 0x2a which is not found in atheros or linux	2014-02-23 18:07:17 +00:00
ar5210	* Only update ah_powerMode if we're setting the chip sleep state.	2014-04-30 02:03:13 +00:00
ar5211	* Only update ah_powerMode if we're setting the chip sleep state.	2014-04-30 02:03:13 +00:00
ar5212	* Only update ah_powerMode if we're setting the chip sleep state.	2014-04-30 02:03:13 +00:00
ar5312	Migrate the chip power mode status to public ath_hal, rather than the	2014-03-10 06:03:35 +00:00
ar5416	* Only update ah_powerMode if we're setting the chip sleep state.	2014-04-30 02:03:13 +00:00
ar9001	Use the TPC bank by default for AR9160.	2013-04-17 07:22:23 +00:00
ar9002	Set the antenna "config group" field.	2013-06-12 15:18:10 +00:00
ar9003	Add device identification and probe/attach support for the QCA9565.	2013-05-02 00:59:39 +00:00
ah_debug.h	HAL additions to enable MCI Bluetooth coexistence in the AR9300 HAL.	2013-04-05 07:41:47 +00:00
ah_decode.h
ah_desc.h	Document the AR9285/AR9485 LNA configuration information that's	2013-06-05 00:39:20 +00:00
ah_devid.h	Add Atheros AR1111 support to the HAL.	2014-05-05 07:58:05 +00:00
ah_diagcodes.h
ah_eeprom_9287.c
ah_eeprom_9287.h
ah_eeprom_v1.c
ah_eeprom_v1.h
ah_eeprom_v3.c
ah_eeprom_v3.h
ah_eeprom_v4k.c
ah_eeprom_v4k.h
ah_eeprom_v14.c
ah_eeprom_v14.h
ah_eeprom.h
ah_internal.h	* Add a new capability which returns whether the hardware supports	2014-04-27 23:36:44 +00:00
ah_regdomain.c	PicoStation M2HP presents reg domain 0x2a which is not found in atheros or linux	2014-02-23 18:07:17 +00:00
ah_regdomain.h
ah_soc.h
ah.c	* Add a new capability which returns whether the hardware supports	2014-04-27 23:36:44 +00:00
ah.h	* Add a new capability which returns whether the hardware supports	2014-04-27 23:36:44 +00:00