a1ec53930b
Approved by: re (implicitly)
663 lines
20 KiB
Plaintext
663 lines
20 KiB
Plaintext
#
|
||
# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
|
||
#
|
||
# This file contains machine dependent kernel configuration notes. For
|
||
# machine independent notes, look in /sys/conf/NOTES.
|
||
#
|
||
# $FreeBSD$
|
||
#
|
||
|
||
#
|
||
# We want LINT to cover profiling as well.
|
||
profile 2
|
||
|
||
|
||
#####################################################################
|
||
# SMP OPTIONS:
|
||
#
|
||
# Notes:
|
||
#
|
||
# IPI_PREEMPTION instructs the kernel to preempt threads running on other
|
||
# CPUS if needed. Relies on the PREEMPTION option
|
||
|
||
# Optional:
|
||
options IPI_PREEMPTION
|
||
device atpic # Optional legacy pic support
|
||
device mptable # Optional MPSPEC mptable support
|
||
|
||
#
|
||
# Watchdog routines.
|
||
#
|
||
options MP_WATCHDOG
|
||
|
||
#
|
||
# Debugging options.
|
||
#
|
||
options STOP_NMI # Stop CPUS using NMI instead of IPI
|
||
|
||
|
||
|
||
#####################################################################
|
||
# CPU OPTIONS
|
||
|
||
#
|
||
# You must specify at least one CPU (the one you intend to run on);
|
||
# deleting the specification for CPUs you don't need to use may make
|
||
# parts of the system run faster.
|
||
#
|
||
cpu HAMMER # aka K8, aka Opteron & Athlon64
|
||
|
||
#
|
||
# Options for CPU features.
|
||
#
|
||
|
||
#
|
||
# PERFMON causes the driver for Pentium/Pentium Pro performance counters
|
||
# to be compiled. See perfmon(4) for more information.
|
||
#
|
||
#XXX#options PERFMON
|
||
|
||
|
||
#####################################################################
|
||
# NETWORKING OPTIONS
|
||
|
||
#
|
||
# DEVICE_POLLING adds support for mixed interrupt-polling handling
|
||
# of network device drivers, which has significant benefits in terms
|
||
# of robustness to overloads and responsivity, as well as permitting
|
||
# accurate scheduling of the CPU time between kernel network processing
|
||
# and other activities. The drawback is a moderate (up to 1/HZ seconds)
|
||
# potential increase in response times.
|
||
# It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING
|
||
# to achieve smoother behaviour.
|
||
# Additionally, you can enable/disable polling at runtime with help of
|
||
# the ifconfig(8) utility, and select the CPU fraction reserved to
|
||
# userland with the sysctl variable kern.polling.user_frac
|
||
# (default 50, range 0..100).
|
||
#
|
||
# Not all device drivers support this mode of operation at the time of
|
||
# this writing. See polling(4) for more details.
|
||
|
||
options DEVICE_POLLING
|
||
|
||
|
||
#####################################################################
|
||
# CLOCK OPTIONS
|
||
|
||
# The following options are used for debugging clock behavior only, and
|
||
# should not be used for production systems.
|
||
|
||
# CLK_CALIBRATION_LOOP causes clock calibration to be run in a loop at
|
||
# startup until the user presses a key. (The i8254 clock is always
|
||
# calibrated relative to the RTC (mc146818a) and this option causes the
|
||
# calibration to be repeated.)
|
||
options CLK_CALIBRATION_LOOP
|
||
|
||
# CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254
|
||
# clock to actually be used.
|
||
options CLK_USE_I8254_CALIBRATION
|
||
|
||
|
||
#####################################################################
|
||
# MISCELLANEOUS DEVICES AND OPTIONS
|
||
|
||
#
|
||
# sio: serial ports (see sio(4)), including support for various
|
||
# PC Card devices, such as Modem and NICs
|
||
#
|
||
device sio
|
||
hint.sio.0.at="isa"
|
||
hint.sio.0.port="0x3F8"
|
||
hint.sio.0.flags="0x10"
|
||
hint.sio.0.irq="4"
|
||
|
||
# `flags' specific to sio(4).
|
||
# 0x10 enable console support for this unit. Other console flags
|
||
# (if applicable) are ignored unless this is set. Enabling
|
||
# console support does not make the unit the preferred console.
|
||
# Boot with -h or set boot_serial=YES in the loader. For sio(4)
|
||
# specifically, the 0x20 flag can also be set (see above).
|
||
# Currently, at most one unit can have console support; the
|
||
# first one (in config file order) with this flag set is
|
||
# preferred. Setting this flag for sio0 gives the old behaviour.
|
||
# 0x20 force this unit to be the console (unless there is another
|
||
# higher priority console). This replaces the COMCONSOLE option.
|
||
# 0x40 reserve this unit for low level console operations. Do not
|
||
# access the device in any normal way.
|
||
# 0x80 use this port for serial line gdb support in ddb. Also known
|
||
# as debug port.
|
||
# PnP `flags'
|
||
# 0x1 disable probing of this device. Used to prevent your modem
|
||
# from being attached as a PnP modem.
|
||
# Other flags for sio that aren't documented in the man page.
|
||
# 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
|
||
# ST16650A-compatible UARTs.
|
||
|
||
# Options for sio:
|
||
options COM_ESP # Code for Hayes ESP.
|
||
options COM_MULTIPORT # Code for some cards with shared IRQs.
|
||
options CONSPEED=115200 # Speed for serial console
|
||
# (default 9600).
|
||
|
||
device speaker #Play IBM BASIC-style noises out your speaker
|
||
hint.speaker.0.at="isa"
|
||
hint.speaker.0.port="0x61"
|
||
device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT!
|
||
|
||
|
||
#####################################################################
|
||
# HARDWARE BUS CONFIGURATION
|
||
|
||
#
|
||
# ISA bus
|
||
#
|
||
device isa
|
||
|
||
#
|
||
# Options for `isa':
|
||
#
|
||
# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A
|
||
# interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
|
||
# This option breaks suspend/resume on some portables.
|
||
#
|
||
# AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A
|
||
# interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
|
||
# Automatic EOI is documented not to work for for the slave with the
|
||
# original i8259A, but it works for some clones and some integrated
|
||
# versions.
|
||
#
|
||
# MAXMEM specifies the amount of RAM on the machine; if this is not
|
||
# specified, FreeBSD will first read the amount of memory from the CMOS
|
||
# RAM, so the amount of memory will initially be limited to 64MB or 16MB
|
||
# depending on the BIOS. If the BIOS reports 64MB, a memory probe will
|
||
# then attempt to detect the installed amount of RAM. If this probe
|
||
# fails to detect >64MB RAM you will have to use the MAXMEM option.
|
||
# The amount is in kilobytes, so for a machine with 128MB of RAM, it would
|
||
# be 131072 (128 * 1024).
|
||
#
|
||
# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to
|
||
# reset the CPU for reboot. This is needed on some systems with broken
|
||
# keyboard controllers.
|
||
|
||
options AUTO_EOI_1
|
||
#options AUTO_EOI_2
|
||
|
||
options MAXMEM=(128*1024)
|
||
#options BROKEN_KEYBOARD_RESET
|
||
|
||
#
|
||
# PCI bus & PCI options:
|
||
#
|
||
device pci
|
||
|
||
#
|
||
# AGP GART support
|
||
device agp
|
||
|
||
|
||
#####################################################################
|
||
# HARDWARE DEVICE CONFIGURATION
|
||
|
||
#
|
||
# Optional devices:
|
||
#
|
||
|
||
# PS/2 mouse
|
||
device psm
|
||
hint.psm.0.at="atkbdc"
|
||
hint.psm.0.irq="12"
|
||
|
||
# Options for psm:
|
||
options PSM_HOOKRESUME #hook the system resume event, useful
|
||
#for some laptops
|
||
options PSM_RESETAFTERSUSPEND #reset the device at the resume event
|
||
|
||
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
|
||
device atkbdc
|
||
hint.atkbdc.0.at="isa"
|
||
hint.atkbdc.0.port="0x060"
|
||
|
||
# The AT keyboard
|
||
device atkbd
|
||
hint.atkbd.0.at="atkbdc"
|
||
hint.atkbd.0.irq="1"
|
||
|
||
# Options for atkbd:
|
||
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
|
||
makeoptions ATKBD_DFLT_KEYMAP=jp.106
|
||
|
||
# `flags' for atkbd:
|
||
# 0x01 Force detection of keyboard, else we always assume a keyboard
|
||
# 0x02 Don't reset keyboard, useful for some newer ThinkPads
|
||
# 0x03 Force detection and avoid reset, might help with certain
|
||
# dockingstations
|
||
# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
|
||
|
||
# Video card driver for VGA adapters.
|
||
device vga
|
||
hint.vga.0.at="isa"
|
||
|
||
# Options for vga:
|
||
# Try the following option if the mouse pointer is not drawn correctly
|
||
# or font does not seem to be loaded properly. May cause flicker on
|
||
# some systems.
|
||
options VGA_ALT_SEQACCESS
|
||
|
||
# If you can dispense with some vga driver features, you may want to
|
||
# use the following options to save some memory.
|
||
#options VGA_NO_FONT_LOADING # don't save/load font
|
||
#options VGA_NO_MODE_CHANGE # don't change video modes
|
||
|
||
# Older video cards may require this option for proper operation.
|
||
options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs
|
||
|
||
# The following option probably won't work with the LCD displays.
|
||
options VGA_WIDTH90 # support 90 column modes
|
||
|
||
# Debugging.
|
||
options VGA_DEBUG
|
||
|
||
# 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create
|
||
# the /dev/3dfx0 device to work with glide implementations. This should get
|
||
# linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as
|
||
# the tdfx DRI module from XFree86 and is completely unrelated.
|
||
#
|
||
# To enable Linuxulator support, one must also include COMPAT_LINUX in the
|
||
# config as well. The other option is to load both as modules.
|
||
|
||
device tdfx # Enable 3Dfx Voodoo support
|
||
#XXX#device tdfx_linux # Enable Linuxulator support
|
||
|
||
#
|
||
# ACPI support using the Intel ACPI Component Architecture reference
|
||
# implementation.
|
||
#
|
||
# ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer
|
||
# kernel environment variables to select initial debugging levels for the
|
||
# Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER
|
||
# defined when it is built).
|
||
#
|
||
# ACPI_NO_SEMAPHORES makes the AcpiOs*Semaphore routines a no-op.
|
||
|
||
device acpi
|
||
options ACPI_DEBUG
|
||
#!options ACPI_NO_SEMAPHORES
|
||
|
||
# The cpufreq(4) driver provides support for non-ACPI CPU frequency control
|
||
device cpufreq
|
||
|
||
# Direct Rendering modules for 3D acceleration.
|
||
device drm # DRM core module required by DRM drivers
|
||
device i915drm # Intel i830 through i915
|
||
device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL
|
||
device mgadrm # AGP Matrox G200, G400, G450, G550
|
||
device r128drm # ATI Rage 128
|
||
device radeondrm # ATI Radeon
|
||
device savagedrm # S3 Savage3D, Savage4
|
||
device sisdrm # SiS 300/305, 540, 630
|
||
device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee
|
||
options DRM_DEBUG # Include debug printfs (slow)
|
||
|
||
#
|
||
# Network interfaces:
|
||
#
|
||
|
||
# ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan)
|
||
# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
|
||
# HP PC Lan+, various PC Card devices
|
||
# (requires miibus)
|
||
# ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter
|
||
# iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters
|
||
# nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source)
|
||
# nve: nVidia nForce MCP on-board Ethernet Networking
|
||
# ral: Ralink Technology IEEE 802.11 wireless adapter
|
||
# ural: Ralink Technology RT2500USB IEEE 802.11 wireless adapter
|
||
|
||
device ed
|
||
options ED_3C503
|
||
options ED_HPP
|
||
options ED_SIC
|
||
device iwi
|
||
device ipw
|
||
device nfe # nVidia nForce MCP on-board Ethernet Networking
|
||
device nve # nVidia nForce MCP on-board Ethernet Networking
|
||
device ral
|
||
device ural
|
||
|
||
device ath
|
||
device ath_hal # Atheros HAL (includes binary component)
|
||
#device ath_rate_amrr # AMRR rate control for ath driver
|
||
#device ath_rate_onoe # Onoe rate control for ath driver
|
||
device ath_rate_sample # SampleRate rate control for the ath driver
|
||
#device wlan # 802.11 layer
|
||
|
||
#
|
||
#XXX this stores pointers in a 32bit field that is defined by the hardware
|
||
#device pst
|
||
|
||
#
|
||
# Areca 11xx and 12xx series of SATA II RAID controllers.
|
||
# CAM is required.
|
||
#
|
||
device arcmsr # Areca SATA II RAID
|
||
|
||
#
|
||
# 3ware 9000 series PATA/SATA RAID controller driver and options.
|
||
# The driver is implemented as a SIM, and so, needs the CAM infrastructure.
|
||
#
|
||
options TWA_DEBUG # 0-10; 10 prints the most messages.
|
||
options TWA_FLASH_FIRMWARE # firmware image bundled when defined.
|
||
device twa # 3ware 9000 series PATA/SATA RAID
|
||
|
||
#
|
||
# SCSI host adapters:
|
||
#
|
||
# ncv: NCR 53C500 based SCSI host adapters.
|
||
# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
|
||
# stg: TMC 18C30, 18C50 based SCSI host adapters.
|
||
|
||
device ncv
|
||
device nsp
|
||
device stg
|
||
|
||
#
|
||
# Adaptec FSA RAID controllers, including integrated DELL controllers,
|
||
# the Dell PERC 2/QC and the HP NetRAID-4M
|
||
device aac
|
||
device aacp # SCSI Passthrough interface (optional, CAM required)
|
||
|
||
#
|
||
# Highpoint RocketRAID 182x. This is really just software RAID on a
|
||
# Marvell SATA chip.
|
||
device hptmv
|
||
|
||
#
|
||
# Highpoint RocketRAID 232x. This is software RAID but with hardware
|
||
# acceleration assistance for RAID_5.
|
||
device rr232x
|
||
|
||
#
|
||
# Highpoint RocketRaid 3xxx series SATA RAID
|
||
device hptiop
|
||
|
||
#
|
||
# IBM (now Adaptec) ServeRAID controllers
|
||
device ips
|
||
|
||
#
|
||
# SafeNet crypto driver: can be moved to the MI NOTES as soon as
|
||
# it's tested on a big-endian machine
|
||
#
|
||
device safe # SafeNet 1141
|
||
options SAFE_DEBUG # enable debugging support: hw.safe.debug
|
||
options SAFE_RNDTEST # enable rndtest support
|
||
|
||
#####################################################################
|
||
|
||
#
|
||
# Miscellaneous hardware:
|
||
#
|
||
# ipmi: Intelligent Platform Management Interface
|
||
# smbios: DMI/SMBIOS entry point
|
||
# vpd: Vital Product Data kernel interface
|
||
# cy: Cyclades serial driver
|
||
# digi: Digiboard driver
|
||
|
||
# Notes on the Specialix SI/XIO driver:
|
||
# The host card is memory, not IO mapped.
|
||
# The Rev 1 host cards use a 64K chunk, on a 32K boundary.
|
||
# The Rev 2 host cards use a 32K chunk, on a 32K boundary.
|
||
# The cards can use an IRQ of 11, 12 or 15.
|
||
|
||
device cy
|
||
options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared
|
||
device digi
|
||
# BIOS & FEP/OS components of device digi.
|
||
device digi_CX
|
||
device digi_CX_PCI
|
||
device digi_EPCX
|
||
device digi_EPCX_PCI
|
||
device digi_Xe
|
||
device digi_Xem
|
||
device digi_Xr
|
||
device ipmi
|
||
# Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724)
|
||
device pbio
|
||
hint.pbio.0.at="isa"
|
||
hint.pbio.0.port="0x360"
|
||
device smbios
|
||
device vpd
|
||
# HOT1 Xilinx 6200 card (http://www.vcc.com/)
|
||
device xrpu
|
||
|
||
#
|
||
# Laptop/Notebook options:
|
||
#
|
||
|
||
|
||
#
|
||
# I2C Bus
|
||
#
|
||
|
||
#
|
||
# Hardware watchdog timers:
|
||
#
|
||
# ichwd: Intel ICH watchdog timer
|
||
#
|
||
device ichwd
|
||
|
||
#---------------------------------------------------------------------------
|
||
# ISDN4BSD
|
||
#
|
||
# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
|
||
#
|
||
# i4b passive ISDN cards support contains the following hardware drivers:
|
||
#
|
||
# isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver
|
||
# iwic - Winbond W6692 PCI bus ISDN S/T interface controller
|
||
# ifpi - AVM Fritz!Card PCI driver
|
||
# ifpi2 - AVM Fritz!Card PCI version 2 driver
|
||
# itjc - Siemens ISAC / TJNet Tiger300/320 chipset
|
||
#
|
||
# i4b active ISDN cards support contains the following hardware drivers:
|
||
#
|
||
# iavc - AVM B1 PCI, AVM B1 ISA, AVM T1
|
||
#
|
||
# Note that the ``options'' (if given) and ``device'' lines must BOTH
|
||
# be uncommented to enable support for a given card !
|
||
#
|
||
# In addition to a hardware driver (and probably an option) the mandatory
|
||
# ISDN protocol stack devices and the mandatory support device must be
|
||
# enabled as well as one or more devices from the optional devices section.
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# isic driver (Siemens/Infineon chipsets)
|
||
#
|
||
#XXX#device isic
|
||
#
|
||
# PCI bus Cards:
|
||
# --------------
|
||
#
|
||
# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
|
||
options ELSA_QS1PCI
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# ifpi2 driver for AVM Fritz!Card PCI version 2
|
||
#
|
||
# AVM Fritz!Card PCI version 2
|
||
#XXX#device ifpi2
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# iwic driver for Winbond W6692 chipset
|
||
#
|
||
# ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards)
|
||
#XXX#device iwic
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset
|
||
#
|
||
# Traverse Technologies NETjet-S
|
||
# Teles PCI-TJ
|
||
#XXX#device itjc
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# iavc driver (AVM active cards, needs i4bcapi driver!)
|
||
#
|
||
#XXX#device iavc
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# ISDN Protocol Stack - mandatory for all hardware drivers
|
||
#
|
||
# Q.921 / layer 2 - i4b passive cards D channel handling
|
||
#XXX#device i4bq921
|
||
#
|
||
# Q.931 / layer 3 - i4b passive cards D channel handling
|
||
#XXX#device i4bq931
|
||
#
|
||
# layer 4 - i4b common passive and active card handling
|
||
#XXX#device i4b
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# ISDN devices - mandatory for all hardware drivers
|
||
#
|
||
# userland driver to do ISDN tracing (for passive cards only)
|
||
#XXX#device i4btrc
|
||
#XXX#options NI4BTRC=4
|
||
#
|
||
# userland driver to control the whole thing
|
||
#XXX#device i4bctl
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
# ISDN devices - optional
|
||
#
|
||
# userland driver for access to raw B channel
|
||
#XXX#device i4brbch
|
||
#XXX#options NI4BRBCH=4
|
||
#
|
||
# userland driver for telephony
|
||
#XXX#device i4btel
|
||
#XXX#options NI4BTEL=2
|
||
#
|
||
# network driver for IP over raw HDLC ISDN
|
||
#XXX#device i4bipr
|
||
#XXX#options NI4BIPR=4
|
||
# enable VJ header compression detection for ipr i/f
|
||
options IPR_VJ
|
||
# enable logging of the first n IP packets to isdnd (n=32 here)
|
||
options IPR_LOG=32
|
||
#
|
||
# network driver for sync PPP over ISDN; requires an equivalent
|
||
# number of sppp device to be configured
|
||
#XXX#device i4bisppp
|
||
#XXX#options NI4BISPPP=4
|
||
#
|
||
# B-channel interface to the netgraph subsystem
|
||
#XXX#device i4bing
|
||
#XXX#options NI4BING=2
|
||
#
|
||
# CAPI driver needed for active ISDN cards (see iavc driver above)
|
||
#XXX#device i4bcapi
|
||
#
|
||
#---------------------------------------------------------------------------
|
||
|
||
#
|
||
# System Management Bus (SMB)
|
||
#
|
||
options ENABLE_ALART # Control alarm on Intel intpm driver
|
||
|
||
#
|
||
# Set the number of PV entries per process. Increasing this can
|
||
# stop panics related to heavy use of shared memory. However, that can
|
||
# (combined with large amounts of physical memory) cause panics at
|
||
# boot time due the kernel running out of VM space.
|
||
#
|
||
# If you're tweaking this, you might also want to increase the sysctls
|
||
# "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target".
|
||
#
|
||
# The value below is the one more than the default.
|
||
#
|
||
options PMAP_SHPGPERPROC=201
|
||
|
||
|
||
#####################################################################
|
||
# ABI Emulation
|
||
|
||
#XXX keep these here for now and reactivate when support for emulating
|
||
#XXX these 32 bit binaries is added.
|
||
|
||
# Enable 32-bit runtime support for FreeBSD/i386 binaries.
|
||
options COMPAT_IA32
|
||
|
||
# Enable iBCS2 runtime support for SCO and ISC binaries
|
||
#XXX#options IBCS2
|
||
|
||
# Emulate spx device for client side of SVR3 local X interface
|
||
#XXX#options SPX_HACK
|
||
|
||
# Enable Linux ABI emulation
|
||
#XXX#options COMPAT_LINUX
|
||
|
||
# Enable 32-bit Linux ABI emulation (requires COMPAT_43 and COMPAT_IA32)
|
||
options COMPAT_LINUX32
|
||
|
||
# Enable the linux-like proc filesystem support (requires COMPAT_LINUX32
|
||
# and PSEUDOFS)
|
||
options LINPROCFS
|
||
|
||
#Enable the linux-like sys filesystem support (requires COMPAT_LINUX32
|
||
# and PSEUDOFS)
|
||
options LINSYSFS
|
||
|
||
#
|
||
# SysVR4 ABI emulation
|
||
#
|
||
# The svr4 ABI emulator can be statically compiled into the kernel or loaded as
|
||
# a KLD module.
|
||
# The STREAMS network emulation code can also be compiled statically or as a
|
||
# module. If loaded as a module, it must be loaded before the svr4 module
|
||
# (the /usr/sbin/svr4 script does this for you). If compiling statically,
|
||
# the `streams' device must be configured into any kernel which also
|
||
# specifies COMPAT_SVR4. It is possible to have a statically-configured
|
||
# STREAMS device and a dynamically loadable svr4 emulator; the /usr/sbin/svr4
|
||
# script understands that it doesn't need to load the `streams' module under
|
||
# those circumstances.
|
||
# Caveat: At this time, `options KTRACE' is required for the svr4 emulator
|
||
# (whether static or dynamic).
|
||
#
|
||
#XXX#options COMPAT_SVR4 # build emulator statically
|
||
#XXX#options DEBUG_SVR4 # enable verbose debugging
|
||
#XXX#device streams # STREAMS network driver (required for svr4).
|
||
|
||
|
||
#####################################################################
|
||
# VM OPTIONS
|
||
|
||
# KSTACK_PAGES is the number of memory pages to assign to the kernel
|
||
# stack of each thread.
|
||
|
||
options KSTACK_PAGES=3
|
||
|
||
#####################################################################
|
||
|
||
# More undocumented options for linting.
|
||
# Note that documenting these are not considered an affront.
|
||
|
||
options FB_INSTALL_CDEV # install a CDEV entry in /dev
|
||
|
||
options KBDIO_DEBUG=2
|
||
options KBD_MAXRETRY=4
|
||
options KBD_MAXWAIT=6
|
||
options KBD_RESETDELAY=201
|
||
|
||
options PSM_DEBUG=1
|
||
|
||
options TIMER_FREQ=((14318182+6)/12)
|
||
|
||
options VM_KMEM_SIZE
|
||
options VM_KMEM_SIZE_MAX
|
||
options VM_KMEM_SIZE_SCALE
|
||
|
||
# Enable NDIS binary driver support
|
||
options NDISAPI
|
||
device ndis
|