freebsd-nq/sys/gnu/dts/arm/stihxxx-b2120.dtsi
2019-09-28 22:54:56 +00:00

207 lines
3.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics (R&D) Limited.
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*/
#include <dt-bindings/clock/stih407-clks.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/c8sectpfe.h>
/ {
leds {
compatible = "gpio-leds";
red {
label = "Front Panel LED";
gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
green {
gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2120";
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
simple-audio-card,dai-link@0 {
reg = <0>;
/* HDMI */
format = "i2s";
mclk-fs = <128>;
cpu {
sound-dai = <&sti_uni_player0>;
};
codec {
sound-dai = <&sti_hdmi>;
};
};
simple-audio-card,dai-link@1 {
reg = <1>;
/* DAC */
format = "i2s";
mclk-fs = <256>;
frame-inversion = <1>;
cpu {
sound-dai = <&sti_uni_player2>;
};
codec {
sound-dai = <&sti_sasg_codec 1>;
};
};
simple-audio-card,dai-link@2 {
reg = <2>;
/* SPDIF */
format = "left_j";
mclk-fs = <128>;
cpu {
sound-dai = <&sti_uni_player3>;
};
codec {
sound-dai = <&sti_sasg_codec 0>;
};
};
};
soc {
sbc_serial0: serial@9530000 {
status = "okay";
};
pwm0: pwm@9810000 {
status = "okay";
};
pwm1: pwm@9510000 {
status = "okay";
};
ssc2: i2c@9842000 {
status = "okay";
clock-frequency = <100000>;
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
};
ssc3: i2c@9843000 {
status = "okay";
clock-frequency = <100000>;
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
};
i2c@9844000 {
status = "okay";
};
i2c@9845000 {
status = "okay";
};
i2c@9540000 {
status = "okay";
};
mmc0: sdhci@9060000 {
non-removable;
status = "okay";
};
mmc1: sdhci@9080000 {
status = "okay";
};
/* SSC11 to HDMI */
hdmiddc: i2c@9541000 {
status = "okay";
/* HDMI V1.3a supports Standard mode only */
clock-frequency = <100000>;
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
};
miphy28lp_phy: miphy28lp@0 {
phy_port0: port@9b22000 {
st,osc-rdy;
};
phy_port1: port@9b2a000 {
st,osc-force-ext;
};
};
st_dwc3: dwc3@8f94000 {
status = "okay";
};
ethernet0: dwmac@9630000 {
st,tx-retime-src = "clkgen";
status = "okay";
phy-mode = "rgmii";
fixed-link = <0 1 1000 0 0>;
};
demux@8a20000 {
compatible = "st,stih407-c8sectpfe";
status = "okay";
reg = <0x08a20000 0x10000>,
<0x08a00000 0x4000>;
reg-names = "c8sectpfe", "c8sectpfe-ram";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "c8sectpfe-error-irq",
"c8sectpfe-idle-irq";
pinctrl-0 = <&pinctrl_tsin0_serial>;
pinctrl-1 = <&pinctrl_tsin0_parallel>;
pinctrl-2 = <&pinctrl_tsin3_serial>;
pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
pinctrl-names = "tsin0-serial",
"tsin0-parallel",
"tsin3-serial",
"tsin4-serial",
"tsin5-serial";
clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
clock-names = "c8sectpfe";
/* tsin0 is TSA on NIMA */
tsin0: port {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
};
sti_uni_player0: sti-uni-player@8d80000 {
status = "okay";
};
sti_uni_player2: sti-uni-player@8d82000 {
status = "okay";
};
sti_uni_player3: sti-uni-player@8d85000 {
status = "okay";
};
syscfg_core: core-syscfg@92b0000 {
sti_sasg_codec: sti-sasg-codec {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif_out>;
};
};
};
};