d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a250a687f7
freebsd-nq/sys/dev/ata/chipsets
History
Alexander Motin a250a687f7 SATA1.x SiliconImage controllers on power-on reset TFD Status register into 
value 0xff. On hot-plug this value confuses ata_generic_reset() device
presence detection logic. As soon as we already know drive presence from
SATA hard reset, hint ata_generic_reset() to wait for device signature
until success or full timeout.
2010-09-02 11:18:43 +00:00
..
ata-acard.c MFp4: 2009-12-06 00:10:13 +00:00
ata-acerlabs.c Make hw.ata.ata_dma_check_80pin tunable affect not only device side, but 2010-07-10 13:46:14 +00:00
ata-adaptec.c Add support for different request block format used by Gen-IIe Marvell SATA. 2009-10-30 20:28:49 +00:00
ata-ahci.c Increase device reset timeout from 10 to 15 seconds, same as in ahci(4). 2010-09-01 06:43:41 +00:00
ata-amd.c Make hw.ata.ata_dma_check_80pin tunable affect not only device side, but 2010-07-10 13:46:14 +00:00
ata-ati.c Report which of IXP700 legacy ATA channels is SATA. 2010-01-10 11:02:10 +00:00
ata-cenatek.c MFp4: 2009-12-06 00:10:13 +00:00
ata-cypress.c MFp4: 2009-12-06 00:10:13 +00:00
ata-cyrix.c MFp4: 2009-12-06 00:10:13 +00:00
ata-highpoint.c Make hw.ata.ata_dma_check_80pin tunable affect not only device side, but 2010-07-10 13:46:14 +00:00
ata-intel.c Add Intel Cougar Point PCH SATA Controller DeviceIDs. Correct some existing 2010-08-28 07:10:51 +00:00
ata-ite.c Make hw.ata.ata_dma_check_80pin tunable affect not only device side, but 2010-07-10 13:46:14 +00:00
ata-jmicron.c Make hw.ata.ata_dma_check_80pin tunable affect not only device side, but 2010-07-10 13:46:14 +00:00
ata-marvell.c If ata_sata_phy_reset() failed and ata_generic_reset() is not called, mark 2010-07-10 15:36:27 +00:00
ata-micron.c MFp4: 2009-12-06 00:10:13 +00:00
ata-national.c MFp4: 2009-12-06 00:10:13 +00:00
ata-netcell.c NetCell is a PCI hardware RAID without cable and mode setting. 2010-02-01 15:22:22 +00:00
ata-nvidia.c If ata_sata_phy_reset() failed and ata_generic_reset() is not called, mark 2010-07-10 15:36:27 +00:00
ata-promise.c If ata_sata_phy_reset() failed and ata_generic_reset() is not called, mark 2010-07-10 15:36:27 +00:00
ata-serverworks.c Following r209299, level interrupts are low by default on PPC, so remove 2010-06-18 14:17:45 +00:00
ata-siliconimage.c SATA1.x SiliconImage controllers on power-on reset TFD Status register into 2010-09-02 11:18:43 +00:00
ata-sis.c If ata_sata_phy_reset() failed and ata_generic_reset() is not called, mark 2010-07-10 15:36:27 +00:00
ata-via.c If ata_sata_phy_reset() failed and ata_generic_reset() is not called, mark 2010-07-10 15:36:27 +00:00