freebsd-nq/sys/netinet6
Julian Elischer b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
..
ah6.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ah_core.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ah_input.c Patches from KAME to remove usage of Varargs in existing 2001-09-07 07:19:12 +00:00
ah_output.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ah.h Patches from KAME to remove usage of Varargs in existing 2001-09-07 07:19:12 +00:00
dest6.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
esp6.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
esp_core.c Fix fencepost error causing creation of 0-length mbufs when the boundary 2001-08-20 17:58:46 +00:00
esp_input.c Patches from KAME to remove usage of Varargs in existing 2001-09-07 07:19:12 +00:00
esp_output.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
esp_rijndael.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
esp_rijndael.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
esp.h Patches from KAME to remove usage of Varargs in existing 2001-09-07 07:19:12 +00:00
frag6.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
icmp6.c use TAILQ_FOREACH() in searching address list 2001-07-03 11:54:07 +00:00
icmp6.h
in6_cksum.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
in6_gif.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
in6_gif.h
in6_ifattach.c When running aplication joined multicast address, 2001-08-04 17:10:14 +00:00
in6_ifattach.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
in6_pcb.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
in6_pcb.h KSE Milestone 2 2001-09-12 08:38:13 +00:00
in6_prefix.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
in6_prefix.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
in6_proto.c gif(4) and stf(4) modernization: 2001-07-02 21:02:09 +00:00
in6_rmx.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
in6_src.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
in6_var.h KSE Milestone 2 2001-09-12 08:38:13 +00:00
in6.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
in6.h remove IN6_IS_ADDR_ANY macro (outside of standard, #if 0'ed for a long time) 2001-06-24 20:43:01 +00:00
ip6_ecn.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ip6_forward.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ip6_fw.c Fix typo (s/=/+=/) in previous commit. 2001-06-28 05:18:31 +00:00
ip6_fw.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ip6_input.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
ip6_mroute.c Wrap array accesses in macros, which also happen to be lvalues: 2001-09-06 02:40:43 +00:00
ip6_mroute.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ip6_output.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
ip6_var.h KSE Milestone 2 2001-09-12 08:38:13 +00:00
ip6.h
ip6protosw.h KSE Milestone 2 2001-09-12 08:38:13 +00:00
ipcomp6.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ipcomp_core.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ipcomp_input.c Patches from KAME to remove usage of Varargs in existing 2001-09-07 07:19:12 +00:00
ipcomp_output.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ipcomp.h Patches from KAME to remove usage of Varargs in existing 2001-09-07 07:19:12 +00:00
ipsec6.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ipsec.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
ipsec.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
mld6_var.h
mld6.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
nd6_nbr.c Add IFT_L2VLAN for supported NDP type. IPv6 over VLAN works now. 2001-06-19 14:48:02 +00:00
nd6_rtr.c Wrap array accesses in macros, which also happen to be lvalues: 2001-09-06 02:40:43 +00:00
nd6.c Wrap array accesses in macros, which also happen to be lvalues: 2001-09-06 02:40:43 +00:00
nd6.h Fix unaligned access (fault) on alpha with ndp -p/-r and sysctl -a. 2001-08-10 00:34:20 +00:00
pim6_var.h
pim6.h
raw_ip6.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
raw_ip6.h Sync with recent KAME. 2001-06-11 12:39:29 +00:00
README
route6.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
scope6_var.h
scope6.c Sync with recent KAME. 2001-06-11 12:39:29 +00:00
tcp6_var.h
udp6_output.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
udp6_usrreq.c KSE Milestone 2 2001-09-12 08:38:13 +00:00
udp6_var.h KSE Milestone 2 2001-09-12 08:38:13 +00:00

a note to committers about KAME tree
$FreeBSD$
KAME project


FreeBSD IPv6/IPsec tree is from KAMEproject (http://www.kame.net/).
To synchronize KAME tree and FreeBSD better today and in the future,
please understand the following:

- DO NOT MAKE COSTMETIC CHANGES.
  "Cosmetic changes" here includes tabify, untabify, removal of space at EOL,
  minor KNF items, and whatever adds more output lines on "diff freebsd kame".
  To make future synchronization easier. it is critical to preserve certain
  statements in the code.  Also, as KAME tree supports all 4 BSDs (Free, Open,
  Net, BSD/OS) in single shared tree, it is not always possible to backport
  FreeBSD changes into KAME tree.  So again, please do not make cosmetic
  changes.  Even if you think it a right thing, that will bite KAME guys badly
  during upgrade attempts, and prevent us from synchronizing two trees.
  (you don't usually make cosmetic changes against third-party code, do you?)

- REPORT CHANGES/BUGS TO KAME GUYS.
  It is not always possible for KAME guys to watch all the freebsd mailing
  list traffic, as the traffic is HUGE.  So if possible, please, inform
  kame guys of changes you made in IPv6/IPsec related portion.  Contact
  path would be snap-users@kame.net or KAME PR database on www.kame.net.
  (or to core@kame.net if it is necessary to make it confidential)

Thank you for your cooperation and have a happy IPv6 life!


Note: KAME-origin code is in the following locations.
The above notice applies to corresponding manpages too.
The list may not be complete.  If you see $KAME$ in the code, it is from
KAME distribution.  If you see some file that is IPv6/IPsec related, it is
highly possible that the file is from KAME distribution.

include/ifaddrs.h
lib/libc/net
lib/libc/net/getaddrinfo.c
lib/libc/net/getifaddrs.c
lib/libc/net/getnameinfo.c
lib/libc/net/ifname.c
lib/libc/net/ip6opt.c
lib/libc/net/map_v4v6.c
lib/libc/net/name6.c
lib/libftpio
lib/libipsec
sbin/ip6fw
sbin/ping6
sbin/rtsol
share/doc/IPv6
share/man/man4/ip6.4
share/man/man4/inet6.4
sys/crypto (except sys/crypto/rc4)
sys/kern/uipc_mbuf2.c
sys/net/if_faith.[ch]
sys/net/if_gif.[ch]
sys/net/if_stf.[ch]
sys/net/pfkeyv2.h
sys/netinet/icmp6.h
sys/netinet/in_gif.[ch]
sys/netinet/ip6.h
sys/netinet/ip_encap.[ch]
sys/netinet6
sys/netkey
usr.sbin/faithd
usr.sbin/gifconfig
usr.sbin/ifmcstat
usr.sbin/mld6query
usr.sbin/ndp
usr.sbin/pim6dd
usr.sbin/pim6sd
usr.sbin/prefix
usr.sbin/rip6query
usr.sbin/route6d
usr.sbin/rrenumd
usr.sbin/rtadvd
usr.sbin/rtsold
usr.sbin/scope6config
usr.sbin/setkey
usr.sbin/traceroute6