a58e485d36
- Added support for ITR (interrupt throttle register). This feature is available on adapters based on 82545 and above - Fixed problem with vlan support when traffic has priority bits set. (kern/45907) PR: kern/45907 MFC after: 1 week
382 lines
12 KiB
C
382 lines
12 KiB
C
/**************************************************************************
|
|
|
|
Copyright (c) 2001-2002, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
***************************************************************************/
|
|
|
|
/*$FreeBSD$*/
|
|
|
|
#ifndef _EM_H_DEFINED_
|
|
#define _EM_H_DEFINED_
|
|
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/sockio.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/tcp.h>
|
|
#include <netinet/udp.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/resource.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/clock.h>
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
#include "opt_bdg.h"
|
|
|
|
#include <dev/em/if_em_hw.h>
|
|
|
|
/* Tunables */
|
|
|
|
/*
|
|
* FlowControl
|
|
* Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
|
|
* Default: Read flow control settings from the EEPROM
|
|
* This parameter controls the automatic generation(Tx) and response(Rx) to
|
|
* Ethernet PAUSE frames.
|
|
*/
|
|
|
|
|
|
/*
|
|
* TxDescriptors
|
|
* Valid Range: 80-256 for 82542 and 82543-based adapters
|
|
* 80-4096 for 82540, 82544, 82545, and 82546-based adapters
|
|
* Default Value: 256
|
|
* This value is the number of transmit descriptors allocated by the driver.
|
|
* Increasing this value allows the driver to queue more transmits. Each
|
|
* descriptor is 16 bytes.
|
|
*/
|
|
#define EM_MAX_TXD 256
|
|
|
|
/*
|
|
* RxDescriptors
|
|
* Valid Range: 80-256 for 82542 and 82543-based adapters
|
|
* 80-4096 for 82540, 82544, 82545, and 82546-based adapters
|
|
* Default Value: 256
|
|
* This value is the number of receive descriptors allocated by the driver.
|
|
* Increasing this value allows the driver to buffer more incoming packets.
|
|
* Each descriptor is 16 bytes. A receive buffer is also allocated for each
|
|
* descriptor. The maximum MTU size is 16110.
|
|
*
|
|
*/
|
|
#define EM_MAX_RXD 256
|
|
|
|
/*
|
|
* TxIntDelay
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value delays the generation of transmit interrupts in units of
|
|
* 1.024 microseconds. Transmit interrupt reduction can improve CPU
|
|
* efficiency if properly tuned for specific network traffic. If the
|
|
* system is reporting dropped transmits, this value may be set too high
|
|
* causing the driver to run out of available transmit descriptors.
|
|
*/
|
|
#define EM_TIDV 64
|
|
|
|
/*
|
|
* TxAbsIntDelay (82540, 82545, and 82546-based adapters only)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value, in units of 1.024 microseconds, limits the delay in which a
|
|
* transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
|
|
* this value ensures that an interrupt is generated after the initial
|
|
* packet is sent on the wire within the set amount of time. Proper tuning,
|
|
* along with TxIntDelay, may improve traffic throughput in specific
|
|
* network conditions.
|
|
*/
|
|
#define EM_TADV 64
|
|
|
|
/*
|
|
* RxIntDelay
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 0
|
|
* This value delays the generation of receive interrupts in units of 1.024
|
|
* microseconds. Receive interrupt reduction can improve CPU efficiency if
|
|
* properly tuned for specific network traffic. Increasing this value adds
|
|
* extra latency to frame reception and can end up decreasing the throughput
|
|
* of TCP traffic. If the system is reporting dropped receives, this value
|
|
* may be set too high, causing the driver to run out of available receive
|
|
* descriptors.
|
|
*
|
|
* CAUTION: When setting RxIntDelay to a value other than 0, adapters
|
|
* may hang (stop transmitting) under certain network conditions.
|
|
* If this occurs a WATCHDOG message is logged in the system event log.
|
|
* In addition, the controller is automatically reset, restoring the
|
|
* network connection. To eliminate the potential for the hang
|
|
* ensure that RxIntDelay is set to 0.
|
|
*/
|
|
#define EM_RDTR 0
|
|
|
|
/*
|
|
* RxAbsIntDelay (82540, 82545, and 82546-based adapters only)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value, in units of 1.024 microseconds, limits the delay in which a
|
|
* receive interrupt is generated. Useful only if RxIntDelay is non-zero,
|
|
* this value ensures that an interrupt is generated after the initial
|
|
* packet is received within the set amount of time. Proper tuning,
|
|
* along with RxIntDelay, may improve traffic throughput in specific network
|
|
* conditions.
|
|
*/
|
|
#define EM_RADV 64
|
|
|
|
|
|
/*
|
|
* This parameter controls the maximum no of times the driver will loop
|
|
* in the isr.
|
|
* Minimum Value = 1
|
|
*/
|
|
#define EM_MAX_INTR 3
|
|
|
|
|
|
/*
|
|
* This parameter determines when the hardware will report that it is
|
|
* done with the packet.
|
|
* 0 - "Done" is reported when the packet has been sent on the wire
|
|
* 1 - "Done" is reported when the packet has been DMA'ed and is on chip.
|
|
* 2 - Determine the best method.
|
|
*/
|
|
#define EM_REPORT_TX_EARLY 2
|
|
|
|
/*
|
|
* Inform the stack about transmit checksum offload capabilities.
|
|
*/
|
|
#define EM_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP)
|
|
|
|
/*
|
|
* This parameter controls the duration of transmit watchdog timer.
|
|
*/
|
|
#define EM_TX_TIMEOUT 5 /* set to 5 seconds */
|
|
|
|
/*
|
|
* This parameter controls when the driver calls the routine to reclaim
|
|
* transmit descriptors.
|
|
*/
|
|
#define EM_TX_CLEANUP_THRESHOLD EM_MAX_TXD / 8
|
|
|
|
/*
|
|
* This parameter controls whether or not autonegotation is enabled.
|
|
* 0 - Disable autonegotiation
|
|
* 1 - Enable autonegotiation
|
|
*/
|
|
#define DO_AUTO_NEG 1
|
|
|
|
/*
|
|
* This parameter control whether or not the driver will wait for
|
|
* autonegotiation to complete.
|
|
* 1 - Wait for autonegotiation to complete
|
|
* 0 - Don't wait for autonegotiation to complete
|
|
*/
|
|
#define WAIT_FOR_AUTO_NEG_DEFAULT 1
|
|
|
|
|
|
/* Tunables -- End */
|
|
|
|
#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
|
|
ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
|
|
ADVERTISE_1000_FULL)
|
|
|
|
#define EM_VENDOR_ID 0x8086
|
|
#define EM_MMBA 0x0010 /* Mem base address */
|
|
#define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1))
|
|
#define EM_JUMBO_PBA 0x00000028
|
|
#define EM_DEFAULT_PBA 0x00000030
|
|
|
|
#define IOCTL_CMD_TYPE u_long
|
|
#define MAX_NUM_MULTICAST_ADDRESSES 128
|
|
#define PCI_ANY_ID (~0U)
|
|
|
|
#ifndef ETHER_ALIGN
|
|
#define ETHER_ALIGN 2
|
|
#endif
|
|
|
|
#define QTAG_TYPE 0x8100
|
|
|
|
/* Defines for printing debug information */
|
|
#define DEBUG_INIT 0
|
|
#define DEBUG_IOCTL 0
|
|
#define DEBUG_HW 0
|
|
|
|
#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n")
|
|
#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A)
|
|
#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B)
|
|
#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n")
|
|
#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A)
|
|
#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B)
|
|
#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n")
|
|
#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A)
|
|
#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B)
|
|
|
|
|
|
/* Supported RX Buffer Sizes */
|
|
#define EM_RXBUFFER_2048 2048
|
|
#define EM_RXBUFFER_4096 4096
|
|
#define EM_RXBUFFER_8192 8192
|
|
#define EM_RXBUFFER_16384 16384
|
|
|
|
#ifdef __alpha__
|
|
#undef vtophys
|
|
#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)(va))
|
|
#endif /* __alpha__ */
|
|
|
|
/* ******************************************************************************
|
|
* vendor_info_array
|
|
*
|
|
* This array contains the list of Subvendor/Subdevice IDs on which the driver
|
|
* should load.
|
|
*
|
|
* ******************************************************************************/
|
|
typedef struct _em_vendor_info_t {
|
|
unsigned int vendor_id;
|
|
unsigned int device_id;
|
|
unsigned int subvendor_id;
|
|
unsigned int subdevice_id;
|
|
unsigned int index;
|
|
} em_vendor_info_t;
|
|
|
|
|
|
struct em_buffer {
|
|
struct mbuf *m_head;
|
|
};
|
|
|
|
|
|
typedef enum _XSUM_CONTEXT_T {
|
|
OFFLOAD_NONE,
|
|
OFFLOAD_TCP_IP,
|
|
OFFLOAD_UDP_IP
|
|
} XSUM_CONTEXT_T;
|
|
|
|
/* Our adapter structure */
|
|
struct adapter {
|
|
struct arpcom interface_data;
|
|
struct adapter *next;
|
|
struct adapter *prev;
|
|
struct em_hw hw;
|
|
|
|
/* FreeBSD operating-system-specific structures */
|
|
struct em_osdep osdep;
|
|
struct device *dev;
|
|
struct resource *res_memory;
|
|
struct resource *res_ioport;
|
|
struct resource *res_interrupt;
|
|
void *int_handler_tag;
|
|
struct ifmedia media;
|
|
struct callout_handle timer_handle;
|
|
int io_rid;
|
|
u_int8_t unit;
|
|
|
|
/* Info about the board itself */
|
|
u_int32_t part_num;
|
|
u_int8_t link_active;
|
|
u_int16_t link_speed;
|
|
u_int16_t link_duplex;
|
|
u_int32_t tx_int_delay;
|
|
u_int32_t tx_abs_int_delay;
|
|
u_int32_t rx_int_delay;
|
|
u_int32_t rx_abs_int_delay;
|
|
|
|
XSUM_CONTEXT_T active_checksum_context;
|
|
|
|
/*
|
|
* Transmit definitions
|
|
*
|
|
* We have an array of num_tx_desc descriptors (handled
|
|
* by the controller) paired with an array of tx_buffers
|
|
* (at tx_buffer_area).
|
|
* The index of the next available descriptor is next_avail_tx_desc.
|
|
* The number of remaining tx_desc is num_tx_desc_avail.
|
|
*/
|
|
struct em_tx_desc *tx_desc_base;
|
|
u_int32_t next_avail_tx_desc;
|
|
u_int32_t oldest_used_tx_desc;
|
|
volatile u_int16_t num_tx_desc_avail;
|
|
u_int16_t num_tx_desc;
|
|
u_int32_t txd_cmd;
|
|
struct em_buffer *tx_buffer_area;
|
|
|
|
/*
|
|
* Receive definitions
|
|
*
|
|
* we have an array of num_rx_desc rx_desc (handled by the
|
|
* controller), and paired with an array of rx_buffers
|
|
* (at rx_buffer_area).
|
|
* The next pair to check on receive is at offset next_rx_desc_to_check
|
|
*/
|
|
struct em_rx_desc *rx_desc_base;
|
|
u_int32_t next_rx_desc_to_check;
|
|
u_int16_t num_rx_desc;
|
|
u_int32_t rx_buffer_len;
|
|
struct em_buffer *rx_buffer_area;
|
|
|
|
|
|
/* Jumbo frame */
|
|
struct mbuf *fmp;
|
|
struct mbuf *lmp;
|
|
|
|
|
|
/* Misc stats maintained by the driver */
|
|
unsigned long dropped_pkts;
|
|
unsigned long mbuf_alloc_failed;
|
|
unsigned long mbuf_cluster_failed;
|
|
unsigned long no_tx_desc_avail1;
|
|
unsigned long no_tx_desc_avail2;
|
|
#ifdef DBG_STATS
|
|
unsigned long no_pkts_avail;
|
|
unsigned long clean_tx_interrupts;
|
|
|
|
#endif
|
|
|
|
struct em_hw_stats stats;
|
|
};
|
|
|
|
#endif /* _EM_H_DEFINED_ */
|