405ada37fb
This is needed with the pl011 driver. Before this change it would default to a shift of 0, however the hardware places the registers at 4-byte addresses meaning the value should be 2. This patch fixes this for the pl011 when configured using the fdt. The other drivers have a default value of 0 to keep this a no-op. MFC after: 1 week
534 lines
13 KiB
C
534 lines
13 KiB
C
/* $NetBSD: uart.c,v 1.2 2007/03/23 20:05:47 dogcow Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2010 Aleksandr Rybalko.
|
|
* Copyright (c) 2007 Ruslan Ermilov and Vsevolod Lobko.
|
|
* Copyright (c) 2007 Oleksandr Tymoshenko.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/reboot.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/kernel.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/uart/uart.h>
|
|
#include <dev/uart/uart_cpu.h>
|
|
#include <dev/uart/uart_bus.h>
|
|
|
|
#include <mips/rt305x/uart_dev_rt305x.h>
|
|
#include <mips/rt305x/rt305xreg.h>
|
|
|
|
#include "uart_if.h"
|
|
/*
|
|
* Low-level UART interface.
|
|
*/
|
|
static int rt305x_uart_probe(struct uart_bas *bas);
|
|
static void rt305x_uart_init(struct uart_bas *bas, int, int, int, int);
|
|
static void rt305x_uart_term(struct uart_bas *bas);
|
|
static void rt305x_uart_putc(struct uart_bas *bas, int);
|
|
static int rt305x_uart_rxready(struct uart_bas *bas);
|
|
static int rt305x_uart_getc(struct uart_bas *bas, struct mtx *);
|
|
|
|
static struct uart_ops uart_rt305x_uart_ops = {
|
|
.probe = rt305x_uart_probe,
|
|
.init = rt305x_uart_init,
|
|
.term = rt305x_uart_term,
|
|
.putc = rt305x_uart_putc,
|
|
.rxready = rt305x_uart_rxready,
|
|
.getc = rt305x_uart_getc,
|
|
};
|
|
|
|
static int uart_output = 1;
|
|
SYSCTL_INT(_kern, OID_AUTO, uart_output, CTLFLAG_RWTUN,
|
|
&uart_output, 0, "UART output enabled.");
|
|
|
|
static int
|
|
rt305x_uart_probe(struct uart_bas *bas)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
rt305x_uart_init(struct uart_bas *bas, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
#ifdef notyet
|
|
/* CLKDIV = 384000000/ 3/ 16/ br */
|
|
/* for 384MHz CLKDIV = 8000000 / baudrate; */
|
|
switch (databits) {
|
|
case 5:
|
|
databits = UART_LCR_5B;
|
|
break;
|
|
case 6:
|
|
databits = UART_LCR_6B;
|
|
break;
|
|
case 7:
|
|
databits = UART_LCR_7B;
|
|
break;
|
|
case 8:
|
|
databits = UART_LCR_8B;
|
|
break;
|
|
default:
|
|
/* Unsupported */
|
|
return;
|
|
}
|
|
switch (parity) {
|
|
case UART_PARITY_EVEN: parity = (UART_LCR_PEN|UART_LCR_EVEN); break;
|
|
case UART_PARITY_NONE: parity = (UART_LCR_PEN); break;
|
|
case UART_PARITY_ODD: parity = 0; break;
|
|
/* Unsupported */
|
|
default: return;
|
|
}
|
|
uart_setreg(bas, UART_CDDL_REG, 8000000/baudrate);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, UART_LCR_REG, databits | (stopbits==1?0:4) | parity);
|
|
uart_barrier(bas);
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
rt305x_uart_term(struct uart_bas *bas)
|
|
{
|
|
uart_setreg(bas, UART_MCR_REG, 0);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
static void
|
|
rt305x_uart_putc(struct uart_bas *bas, int c)
|
|
{
|
|
char chr;
|
|
if (!uart_output) return;
|
|
chr = c;
|
|
while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE));
|
|
uart_setreg(bas, UART_TX_REG, c);
|
|
uart_barrier(bas);
|
|
while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE));
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_rxready(struct uart_bas *bas)
|
|
{
|
|
#ifdef notyet
|
|
if (uart_getreg(bas, UART_LSR_REG) & UART_LSR_DR)
|
|
return (1);
|
|
|
|
return (0);
|
|
#else
|
|
return (1);
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_getc(struct uart_bas *bas, struct mtx *hwmtx)
|
|
{
|
|
int c;
|
|
|
|
uart_lock(hwmtx);
|
|
|
|
while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_DR)) {
|
|
uart_unlock(hwmtx);
|
|
DELAY(10);
|
|
uart_lock(hwmtx);
|
|
}
|
|
|
|
c = uart_getreg(bas, UART_RX_REG);
|
|
|
|
uart_unlock(hwmtx);
|
|
|
|
return (c);
|
|
}
|
|
|
|
/*
|
|
* High-level UART interface.
|
|
*/
|
|
struct rt305x_uart_softc {
|
|
struct uart_softc base;
|
|
};
|
|
|
|
static int rt305x_uart_bus_attach(struct uart_softc *);
|
|
static int rt305x_uart_bus_detach(struct uart_softc *);
|
|
static int rt305x_uart_bus_flush(struct uart_softc *, int);
|
|
static int rt305x_uart_bus_getsig(struct uart_softc *);
|
|
static int rt305x_uart_bus_ioctl(struct uart_softc *, int, intptr_t);
|
|
static int rt305x_uart_bus_ipend(struct uart_softc *);
|
|
static int rt305x_uart_bus_param(struct uart_softc *, int, int, int, int);
|
|
static int rt305x_uart_bus_probe(struct uart_softc *);
|
|
static int rt305x_uart_bus_receive(struct uart_softc *);
|
|
static int rt305x_uart_bus_setsig(struct uart_softc *, int);
|
|
static int rt305x_uart_bus_transmit(struct uart_softc *);
|
|
static void rt305x_uart_bus_grab(struct uart_softc *);
|
|
static void rt305x_uart_bus_ungrab(struct uart_softc *);
|
|
|
|
static kobj_method_t rt305x_uart_methods[] = {
|
|
KOBJMETHOD(uart_attach, rt305x_uart_bus_attach),
|
|
KOBJMETHOD(uart_detach, rt305x_uart_bus_detach),
|
|
KOBJMETHOD(uart_flush, rt305x_uart_bus_flush),
|
|
KOBJMETHOD(uart_getsig, rt305x_uart_bus_getsig),
|
|
KOBJMETHOD(uart_ioctl, rt305x_uart_bus_ioctl),
|
|
KOBJMETHOD(uart_ipend, rt305x_uart_bus_ipend),
|
|
KOBJMETHOD(uart_param, rt305x_uart_bus_param),
|
|
KOBJMETHOD(uart_probe, rt305x_uart_bus_probe),
|
|
KOBJMETHOD(uart_receive, rt305x_uart_bus_receive),
|
|
KOBJMETHOD(uart_setsig, rt305x_uart_bus_setsig),
|
|
KOBJMETHOD(uart_transmit, rt305x_uart_bus_transmit),
|
|
KOBJMETHOD(uart_grab, rt305x_uart_bus_grab),
|
|
KOBJMETHOD(uart_ungrab, rt305x_uart_bus_ungrab),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
struct uart_class uart_rt305x_uart_class = {
|
|
"rt305x",
|
|
rt305x_uart_methods,
|
|
sizeof(struct rt305x_uart_softc),
|
|
.uc_ops = &uart_rt305x_uart_ops,
|
|
.uc_range = 1, /* use hinted range */
|
|
.uc_rclk = SYSTEM_CLOCK,
|
|
.uc_rshift = 0
|
|
};
|
|
|
|
#define SIGCHG(c, i, s, d) \
|
|
if (c) { \
|
|
i |= (i & s) ? s : s | d; \
|
|
} else { \
|
|
i = (i & s) ? (i & ~s) | d : i; \
|
|
}
|
|
|
|
/*
|
|
* Disable TX interrupt. uart should be locked
|
|
*/
|
|
static __inline void
|
|
rt305x_uart_disable_txintr(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint8_t cr;
|
|
|
|
cr = uart_getreg(bas, UART_IER_REG);
|
|
cr &= ~UART_IER_ETBEI;
|
|
uart_setreg(bas, UART_IER_REG, cr);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
/*
|
|
* Enable TX interrupt. uart should be locked
|
|
*/
|
|
static __inline void
|
|
rt305x_uart_enable_txintr(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint8_t cr;
|
|
|
|
cr = uart_getreg(bas, UART_IER_REG);
|
|
cr |= UART_IER_ETBEI;
|
|
uart_setreg(bas, UART_IER_REG, cr);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_attach(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
struct uart_devinfo *di;
|
|
|
|
bas = &sc->sc_bas;
|
|
if (sc->sc_sysdev != NULL) {
|
|
di = sc->sc_sysdev;
|
|
rt305x_uart_init(bas, di->baudrate, di->databits, di->stopbits,
|
|
di->parity);
|
|
} else {
|
|
rt305x_uart_init(bas, 115200, 8, 1, 0);
|
|
}
|
|
|
|
(void)rt305x_uart_bus_getsig(sc);
|
|
|
|
/* Enable FIFO */
|
|
uart_setreg(bas, UART_FCR_REG,
|
|
uart_getreg(bas, UART_FCR_REG) |
|
|
UART_FCR_FIFOEN | UART_FCR_TXTGR_1 | UART_FCR_RXTGR_1);
|
|
uart_barrier(bas);
|
|
/* Enable interrupts */
|
|
uart_setreg(bas, UART_IER_REG,
|
|
UART_IER_EDSSI | UART_IER_ELSI | UART_IER_ERBFI);
|
|
uart_barrier(bas);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_detach(struct uart_softc *sc)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_flush(struct uart_softc *sc, int what)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint32_t fcr = uart_getreg(bas, UART_FCR_REG);
|
|
if (what & UART_FLUSH_TRANSMITTER) {
|
|
uart_setreg(bas, UART_FCR_REG, fcr|UART_FCR_TXRST);
|
|
uart_barrier(bas);
|
|
}
|
|
if (what & UART_FLUSH_RECEIVER) {
|
|
uart_setreg(bas, UART_FCR_REG, fcr|UART_FCR_RXRST);
|
|
uart_barrier(bas);
|
|
}
|
|
uart_setreg(bas, UART_FCR_REG, fcr);
|
|
uart_barrier(bas);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_getsig(struct uart_softc *sc)
|
|
{
|
|
uint32_t new, old, sig;
|
|
uint8_t bes;
|
|
|
|
do {
|
|
old = sc->sc_hwsig;
|
|
sig = old;
|
|
uart_lock(sc->sc_hwmtx);
|
|
bes = uart_getreg(&sc->sc_bas, UART_MSR_REG);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
/* XXX: chip can show delta */
|
|
SIGCHG(bes & UART_MSR_CTS, sig, SER_CTS, SER_DCTS);
|
|
SIGCHG(bes & UART_MSR_DCD, sig, SER_DCD, SER_DDCD);
|
|
SIGCHG(bes & UART_MSR_DSR, sig, SER_DSR, SER_DDSR);
|
|
new = sig & ~SER_MASK_DELTA;
|
|
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
|
|
|
|
return (sig);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_ioctl(struct uart_softc *sc, int request, intptr_t data)
|
|
{
|
|
struct uart_bas *bas;
|
|
int baudrate, divisor, error;
|
|
|
|
bas = &sc->sc_bas;
|
|
error = 0;
|
|
uart_lock(sc->sc_hwmtx);
|
|
switch (request) {
|
|
case UART_IOCTL_BREAK:
|
|
/* TODO: Send BREAK */
|
|
break;
|
|
case UART_IOCTL_BAUD:
|
|
divisor = uart_getreg(bas, UART_CDDL_REG);
|
|
baudrate = bas->rclk / (divisor * 16);
|
|
*(int*)data = baudrate;
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_ipend(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int ipend;
|
|
uint8_t iir, lsr, msr;
|
|
|
|
bas = &sc->sc_bas;
|
|
ipend = 0;
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
iir = uart_getreg(&sc->sc_bas, UART_IIR_REG);
|
|
lsr = uart_getreg(&sc->sc_bas, UART_LSR_REG);
|
|
uart_setreg(&sc->sc_bas, UART_LSR_REG, lsr);
|
|
msr = uart_getreg(&sc->sc_bas, UART_MSR_REG);
|
|
uart_setreg(&sc->sc_bas, UART_MSR_REG, msr);
|
|
if (iir & UART_IIR_INTP) {
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|
|
|
|
|
|
switch ((iir >> 1) & 0x07) {
|
|
case UART_IIR_ID_THRE:
|
|
ipend |= SER_INT_TXIDLE;
|
|
break;
|
|
case UART_IIR_ID_DR2:
|
|
rt305x_uart_bus_flush(sc, UART_FLUSH_RECEIVER);
|
|
/* passthrough */
|
|
case UART_IIR_ID_DR:
|
|
ipend |= SER_INT_RXREADY;
|
|
break;
|
|
case UART_IIR_ID_MST:
|
|
case UART_IIR_ID_LINESTATUS:
|
|
ipend |= SER_INT_SIGCHG;
|
|
if (lsr & UART_LSR_BI)
|
|
{
|
|
ipend |= SER_INT_BREAK;
|
|
#ifdef KDB
|
|
breakpoint();
|
|
#endif
|
|
}
|
|
if (lsr & UART_LSR_OE)
|
|
ipend |= SER_INT_OVERRUN;
|
|
break;
|
|
default:
|
|
/* XXX: maybe return error here */
|
|
break;
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (ipend);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_param(struct uart_softc *sc, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
uart_lock(sc->sc_hwmtx);
|
|
rt305x_uart_init(&sc->sc_bas, baudrate, databits, stopbits, parity);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_probe(struct uart_softc *sc)
|
|
{
|
|
char buf[80];
|
|
int error;
|
|
|
|
error = rt305x_uart_probe(&sc->sc_bas);
|
|
if (error)
|
|
return (error);
|
|
|
|
sc->sc_rxfifosz = 16;
|
|
sc->sc_txfifosz = 16;
|
|
|
|
snprintf(buf, sizeof(buf), "rt305x_uart");
|
|
device_set_desc_copy(sc->sc_dev, buf);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_receive(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int xc;
|
|
uint8_t lsr;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
lsr = uart_getreg(bas, UART_LSR_REG);
|
|
while ((lsr & UART_LSR_DR)) {
|
|
if (uart_rx_full(sc)) {
|
|
sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN;
|
|
break;
|
|
}
|
|
xc = 0;
|
|
xc = uart_getreg(bas, UART_RX_REG);
|
|
if (lsr & UART_LSR_FE)
|
|
xc |= UART_STAT_FRAMERR;
|
|
if (lsr & UART_LSR_PE)
|
|
xc |= UART_STAT_PARERR;
|
|
if (lsr & UART_LSR_OE)
|
|
xc |= UART_STAT_OVERRUN;
|
|
uart_barrier(bas);
|
|
uart_rx_put(sc, xc);
|
|
lsr = uart_getreg(bas, UART_LSR_REG);
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_setsig(struct uart_softc *sc, int sig)
|
|
{
|
|
|
|
/* TODO: implement (?) */
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rt305x_uart_bus_transmit(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
int i;
|
|
|
|
if (!uart_output) return (0);
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
while ((uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE) == 0)
|
|
;
|
|
rt305x_uart_enable_txintr(sc);
|
|
for (i = 0; i < sc->sc_txdatasz; i++) {
|
|
uart_setreg(bas, UART_TX_REG, sc->sc_txbuf[i]);
|
|
uart_barrier(bas);
|
|
}
|
|
sc->sc_txbusy = 1;
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
rt305x_uart_bus_grab(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
|
|
/* disable interrupts -- XXX not sure which one is RX, so kill them all */
|
|
uart_lock(sc->sc_hwmtx);
|
|
uart_setreg(bas, UART_IER_REG, 0);
|
|
uart_barrier(bas);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|
|
|
|
static void
|
|
rt305x_uart_bus_ungrab(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
|
|
/* Enable interrupts */
|
|
uart_lock(sc->sc_hwmtx);
|
|
uart_setreg(bas, UART_IER_REG,
|
|
UART_IER_EDSSI | UART_IER_ELSI | UART_IER_ERBFI);
|
|
uart_barrier(bas);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|