a67acf111f
When doing A-MSDU offload handling the driver is required to mark A-MSDUs from the same MPDU with the same sequence number. It then tags them as AMSDU (if it's a decap'ed A-MSDU) and AMSDU_MORE (saying there's more AMSDUs decapped in the same MSDU.) This allows encryption and sequence number offload to work right. In the A-MSDU path the sequence number check looks at the A-MSDU flags in the frame to see whether it's part of the same seqno and will pass them (ie, not increment rx_seq until the last A-MSDU is seen from the driver, or a new seqno shows up.0 However, I did this work in the A-MSDU path but not the A-MSDU in A-MPDU path. For the non A-MDSU offload case the A-MPDU receive reordering will do its thing and then pass up the MPDU up for decap - which then will see it's an A-MSDU and decap each sub-frame. But this isn't done for offloaded A-MSDU frames. This requires two parts: * Don't bump the RX sequence number, same as above; and * If frames go into the reordering buffer, they need to be added into the slot as a set of frames rather than a single frame, so once a new seqno shows up this slot can be marked as "full" and we can move on. This patch does the first. The latter requires that I find and commit work to change rxa_m from an mbuf to an mbufq and the nhandle A-MSDU there. But, the first is enough to allow the normal case (ie, no or not a lot of A-MPDU RX reordering) to work. This allows the athp driver (QCA9880) throughput to go from VERY low (like 5mbit TCP, 1/3-1/4 expected UDP throughput) to ~ 250mbit TCP and > 300mbit UDP on a VHT/40 channel. TCP sucks because, well, it shows up as MASSIVE packet loss when all but one frame in a decap'ed A-MSDU stream is dropped. Le whoops. Now, where'd I put that laptop with the patch for rxa_m mbufq that I wrote like in 2017... Tested: * AR9380, STA/AP mode (a big no-op, no A-MSDU hardware decap); * if_run (RT3593), STA DWDS mode (A-MPDU / A-MSDU receive, but again no A-MSDU hardware decap); * QCA9880, STA/AP mode (which is doing hardware A-MPDU/A-MSDU decap, but no A-MPDU reordering in the firmware.)
FreeBSD Source:
This is the top level of the FreeBSD source directory. This file
was last revised on:
FreeBSD
FreeBSD is an operating system used to power modern servers, desktops, and embedded platforms. A large community has continually developed it for more than thirty years. Its advanced networking, security, and storage features have made FreeBSD the platform of choice for many of the busiest web sites and most pervasive embedded networking and storage devices.
For copyright information, please see the file COPYRIGHT in this directory. Additional copyright information also exists for some sources in this tree - please see the specific source directories for more information.
The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7), config(8), https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html, and https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html for more information, including setting make(1) variables.
Source Roadmap:
bin System/user commands.
cddl Various commands and libraries under the Common Development
and Distribution License.
contrib Packages contributed by 3rd parties.
crypto Cryptography stuff (see crypto/README).
etc Template files for /etc.
gnu Various commands and libraries under the GNU Public License.
Please see gnu/COPYING* for more information.
include System include files.
kerberos5 Kerberos5 (Heimdal) package.
lib System libraries.
libexec System daemons.
release Release building Makefile & associated tools.
rescue Build system for statically linked /rescue utilities.
sbin System commands.
secure Cryptographic libraries and commands.
share Shared resources.
stand Boot loader sources.
sys Kernel sources.
sys/<arch>/conf Kernel configuration files. GENERIC is the configuration
used in release builds. NOTES contains documentation of
all possible entries.
tests Regression tests which can be run by Kyua. See tests/README
for additional information.
tools Utilities for regression testing and miscellaneous tasks.
usr.bin User commands.
usr.sbin System administration commands.
For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see:
https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable.html