d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a791cfee44
freebsd-nq/sys/dev/ed/if_ed_pccard.c
Ian Dowse 9b04180c2c Add an option ED_NO_MIIBUS, which causes the `ed' driver to be 
built without support for miibus PHYs. Most ed cards don't need
miibus support, so it's useful to be able to avoid the bloat of
all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00

827 lines
24 KiB
C
Raw Blame History

/*
* Copyright (c) 1995, David Greenman
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_ed.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/uio.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_mib.h>
#include <net/if_media.h>
#include <dev/ed/if_edreg.h>
#include <dev/ed/if_edvar.h>
#include <dev/pccard/pccardvar.h>
#include <dev/pccard/pccarddevs.h>
#ifndef ED_NO_MIIBUS
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#endif
#include "card_if.h"
#ifndef ED_NO_MIIBUS
/* "device miibus" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
MODULE_DEPEND(ed, miibus, 1, 1, 1);
#endif
/*
* PC-Card (PCMCIA) specific code.
*/
static int ed_pccard_match(device_t);
static int ed_pccard_probe(device_t);
static int ed_pccard_attach(device_t);
static int ed_pccard_detach(device_t);
static int ed_pccard_Linksys(device_t dev);
static int ed_pccard_ax88190(device_t dev);
static void ax88190_geteprom(struct ed_softc *);
static int ed_pccard_memwrite(device_t dev, off_t offset, u_char byte);
#ifndef ED_NO_MIIBUS
static void ed_pccard_dlink_mii_reset(struct ed_softc *sc);
static u_int ed_pccard_dlink_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_dlink_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
#endif
/*
* ed_pccard_detach - unload the driver and clear the table.
* XXX TODO:
* This is usually called when the card is ejected, but
* can be caused by a modunload of a controller driver.
* The idea is to reset the driver's view of the device
* and ensure that any driver entry points such as
* read and write do not hang.
*/
static int
ed_pccard_detach(device_t dev)
{
struct ed_softc *sc = device_get_softc(dev);
struct ifnet *ifp = &sc->arpcom.ac_if;
if (sc->gone) {
device_printf(dev, "already unloaded\n");
return (0);
}
ed_stop(sc);
ifp->if_flags &= ~IFF_RUNNING;
ether_ifdetach(ifp, ETHER_BPF_SUPPORTED);
sc->gone = 1;
bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
ed_release_resources(dev);
return (0);
}
static const struct ed_product {
struct pccard_product prod;
int enet_maddr;
unsigned char enet_vendor[3];
int flags;
#define NE2000DVF_DL10019 0x0001 /* chip is D-Link DL10019 */
#define NE2000DVF_AX88190 0x0002 /* chip is ASIX AX88190 */
} ed_pccard_products[] = {
{ { PCCARD_STR_AMBICOM_AMB8002T,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_AMBICOM_AMB8002T },
-1, { 0x00, 0x10, 0x7a } },
{ { PCCARD_STR_PREMAX_PE200,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_PREMAX_PE200 },
0x07f0, { 0x00, 0x20, 0xe0 } },
{ { PCCARD_STR_DIGITAL_DEPCMXX,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_DIGITAL_DEPCMXX },
0x0ff0, { 0x00, 0x00, 0xe8 } },
{ { PCCARD_STR_PLANET_SMARTCOM2000,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_PLANET_SMARTCOM2000 },
0xff0, { 0x00, 0x00, 0xe8 } },
{ { PCCARD_STR_DLINK_DE660,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_DLINK_DE660 },
-1, { 0x00, 0x80, 0xc8 } },
{ { PCCARD_STR_RPTI_EP400,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_RPTI_EP400 },
-1, { 0x00, 0x40, 0x95 } },
{ { PCCARD_STR_RPTI_EP401,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_RPTI_EP401 },
-1, { 0x00, 0x40, 0x95 } },
{ { PCCARD_STR_ACCTON_EN2212,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_ACCTON_EN2212 },
0x0ff0, { 0x00, 0x00, 0xe8 } },
{ { PCCARD_STR_SVEC_COMBOCARD,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_SVEC_COMBOCARD },
-1, { 0x00, 0xe0, 0x98 } },
{ { PCCARD_STR_SVEC_LANCARD,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_SVEC_LANCARD },
0x7f0, { 0x00, 0xc0, 0x6c } },
{ { PCCARD_STR_EPSON_EEN10B,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_EPSON_EEN10B, 0,
PCCARD_CIS_EPSON_EEN10B },
0xff0, { 0x00, 0x00, 0x48 } },
/*
* You have to add new entries which contains
* PCCARD_VENDOR_INVALID and/or PCCARD_PRODUCT_INVALID
* in front of this comment.
*
* There are cards which use a generic vendor and product id but needs
* a different handling depending on the cis_info, so ne2000_match
* needs a table where the exceptions comes first and then the normal
* product and vendor entries.
*/
{ { PCCARD_STR_IBM_INFOMOVER,
PCCARD_VENDOR_IBM, PCCARD_PRODUCT_IBM_INFOMOVER, 0,
PCCARD_CIS_IBM_INFOMOVER },
0x0ff0, { 0x08, 0x00, 0x5a } },
{ { PCCARD_STR_IBM_INFOMOVER,
PCCARD_VENDOR_IBM, PCCARD_PRODUCT_IBM_INFOMOVER, 0,
PCCARD_CIS_IBM_INFOMOVER },
0x0ff0, { 0x00, 0x04, 0xac } },
{ { PCCARD_STR_IBM_INFOMOVER,
PCCARD_VENDOR_IBM, PCCARD_PRODUCT_IBM_INFOMOVER, 0,
PCCARD_CIS_IBM_INFOMOVER },
0x0ff0, { 0x00, 0x06, 0x29 } },
{ { PCCARD_STR_KINGSTON_KNE2, PCCARD_VENDOR_KINGSTON,
PCCARD_PRODUCT_KINGSTON_KNE2, 0,
PCCARD_CIS_KINGSTON_KNE2 },
-1, { 0, 0, 0 }, 0 }, /* XXX */
{ { PCCARD_STR_LINKSYS_ECARD_1,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_ECARD_1, 0,
PCCARD_CIS_LINKSYS_ECARD_1 },
-1, { 0x00, 0x80, 0xc8 } },
{ { PCCARD_STR_PLANEX_FNW3600T,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_COMBO_ECARD, 0,
PCCARD_CIS_PLANEX_FNW3600T },
-1, { 0x00, 0x90, 0xcc }, NE2000DVF_DL10019 },
{ { PCCARD_STR_SVEC_PN650TX,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_COMBO_ECARD, 0,
PCCARD_CIS_SVEC_PN650TX },
-1, { 0x00, 0xe0, 0x98 }, NE2000DVF_DL10019 },
/*
* This entry should be here so that above two cards doesn't
* match with this. FNW-3700T won't match above entries due to
* MAC address check.
*/
{ { PCCARD_STR_PLANEX_FNW3700T,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_COMBO_ECARD, 0,
PCCARD_CIS_PLANEX_FNW3700T },
-1, { 0x00, 0x90, 0xcc }, NE2000DVF_AX88190 },
{ { PCCARD_STR_LINKSYS_ETHERFAST,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_ETHERFAST, 0,
PCCARD_CIS_LINKSYS_ETHERFAST },
-1, { 0x00, 0x80, 0xc8 }, NE2000DVF_DL10019 },
{ { PCCARD_STR_DLINK_DE650,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_ETHERFAST, 0,
PCCARD_CIS_DLINK_DE650 },
-1, { 0x00, 0xe0, 0x98 }, NE2000DVF_DL10019 },
{ { PCCARD_STR_MELCO_LPC2_TX,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_ETHERFAST, 0,
PCCARD_CIS_MELCO_LPC2_TX },
-1, { 0x00, 0x40, 0x26 }, NE2000DVF_DL10019 },
{ { PCCARD_STR_LINKSYS_COMBO_ECARD,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_COMBO_ECARD, 0,
PCCARD_CIS_LINKSYS_COMBO_ECARD },
-1, { 0x00, 0x80, 0xc8 } },
{ { PCCARD_STR_LINKSYS_TRUST_COMBO_ECARD,
PCCARD_VENDOR_LINKSYS, PCCARD_PRODUCT_LINKSYS_TRUST_COMBO_ECARD, 0,
PCCARD_CIS_LINKSYS_TRUST_COMBO_ECARD },
0x0120, { 0x20, 0x04, 0x49 } },
/*
* Although the comments above say to put VENDOR/PRODUCT
* INVALID IDs above this list, we need to keep this one below
* the ECARD_1, or else both will match the same more-generic
* entry rather than the more specific one above with proper
* vendor and product IDs.
*/
{ { PCCARD_STR_LINKSYS_ECARD_2,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_LINKSYS_ECARD_2 },
-1, { 0x00, 0x80, 0xc8 } },
/*
* D-Link DE-650 has many minor versions:
*
* CIS information Manufacturer Product Note
* 1 "D-Link, DE-650" INVALID INVALID white card
* 2 "D-Link, DE-650, Ver 01.00" INVALID INVALID became bare metal
* 3 "D-Link, DE-650, Ver 01.00" 0x149 0x265 minor changed look
* 4 "D-Link, DE-650, Ver 01.00" 0x149 0x265 collision LED added
*
* While the 1st and the 2nd types should use the "D-Link DE-650"
* entry, the 3rd and the 4th types should use the "Linksys
* EtherCard" entry. Therefore, this enty must be below the
* LINKSYS_ECARD_1. --itohy
*/
{ { PCCARD_STR_DLINK_DE650,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_DLINK_DE650 },
0x0040, { 0x00, 0x80, 0xc8 } },
/*
* IO-DATA PCLA/TE and later version of PCLA/T has valid
* vendor/product ID and it is possible to read MAC address
* using standard I/O ports. It also read from CIS offset 0x01c0.
* On the other hand, earlier version of PCLA/T doesn't have valid
* vendor/product ID and MAC address must be read from CIS offset
* 0x0ff0 (i.e., usual ne2000 way to read it doesn't work).
* And CIS information of earlier and later version of PCLA/T are
* same except fourth element. So, for now, we place the entry for
* PCLA/TE (and later version of PCLA/T) followed by entry
* for the earlier version of PCLA/T (or, modify to match all CIS
* information and have three or more individual entries).
*/
{ { PCCARD_STR_IODATA_PCLATE,
PCCARD_VENDOR_IODATA, PCCARD_PRODUCT_IODATA_PCLATE, 0,
PCCARD_CIS_IODATA_PCLATE },
-1, { 0x00, 0xa0, 0xb0 } },
/*
* This entry should be placed after above PCLA-TE entry.
* See above comments for detail.
*/
{ { PCCARD_STR_IODATA_PCLAT,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_IODATA_PCLAT },
0x0ff0, { 0x00, 0xa0, 0xb0 } },
{ { PCCARD_STR_DAYNA_COMMUNICARD_E_1,
PCCARD_VENDOR_DAYNA, PCCARD_PRODUCT_DAYNA_COMMUNICARD_E_1, 0,
PCCARD_CIS_DAYNA_COMMUNICARD_E_1 },
0x0110, { 0x00, 0x80, 0x19 } },
{ { PCCARD_STR_DAYNA_COMMUNICARD_E_2,
PCCARD_VENDOR_DAYNA, PCCARD_PRODUCT_DAYNA_COMMUNICARD_E_2, 0,
PCCARD_CIS_DAYNA_COMMUNICARD_E_2 },
-1, { 0x00, 0x80, 0x19 } },
{ { PCCARD_STR_COREGA_ETHER_PCC_T,
PCCARD_VENDOR_COREGA, PCCARD_PRODUCT_COREGA_ETHER_PCC_T, 0,
PCCARD_CIS_COREGA_ETHER_PCC_T },
-1, { 0x00, 0x00, 0xf4 } },
{ { PCCARD_STR_COREGA_ETHER_II_PCC_T,
PCCARD_VENDOR_COREGA, PCCARD_PRODUCT_COREGA_ETHER_II_PCC_T, 0,
PCCARD_CIS_COREGA_ETHER_II_PCC_T },
-1, { 0x00, 0x00, 0xf4 } },
{ { PCCARD_STR_COREGA_FAST_ETHER_PCC_TX,
PCCARD_VENDOR_COREGA, PCCARD_PRODUCT_COREGA_FAST_ETHER_PCC_TX, 0,
PCCARD_CIS_COREGA_FAST_ETHER_PCC_TX },
-1, { 0x00, 0x00, 0xf4 }, NE2000DVF_DL10019 },
{ { PCCARD_STR_COMPEX_LINKPORT_ENET_B,
PCCARD_VENDOR_COMPEX, PCCARD_PRODUCT_COMPEX_LINKPORT_ENET_B, 0,
PCCARD_CIS_COMPEX_LINKPORT_ENET_B },
0x01c0, { 0x00, 0xa0, 0x0c } },
{ { PCCARD_STR_SMC_EZCARD,
PCCARD_VENDOR_SMC, PCCARD_PRODUCT_SMC_EZCARD, 0,
PCCARD_CIS_SMC_EZCARD },
0x01c0, { 0x00, 0xe0, 0x29 } },
{ { PCCARD_STR_SOCKET_LP_ETHER_CF,
PCCARD_VENDOR_SOCKET, PCCARD_PRODUCT_SOCKET_LP_ETHER_CF, 0,
PCCARD_CIS_SOCKET_LP_ETHER_CF },
-1, { 0x00, 0xc0, 0x1b } },
{ { PCCARD_STR_SOCKET_LP_ETHER,
PCCARD_VENDOR_SOCKET, PCCARD_PRODUCT_SOCKET_LP_ETHER, 0,
PCCARD_CIS_SOCKET_LP_ETHER },
-1, { 0x00, 0xc0, 0x1b } },
{ { PCCARD_STR_XIRCOM_CFE_10,
PCCARD_VENDOR_XIRCOM, PCCARD_PRODUCT_XIRCOM_CFE_10, 0,
PCCARD_CIS_XIRCOM_CFE_10 },
-1, { 0x00, 0x10, 0xa4 } },
{ { PCCARD_STR_MELCO_LPC3_TX,
PCCARD_VENDOR_MELCO, PCCARD_PRODUCT_MELCO_LPC3_TX, 0,
PCCARD_CIS_MELCO_LPC3_TX },
-1, { 0x00, 0x40, 0x26 }, NE2000DVF_AX88190 },
{ { PCCARD_STR_BILLIONTON_LNT10TN,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_BILLIONTON_LNT10TN },
-1, { 0x00, 0x00, 0x00 } },
{ { PCCARD_STR_NDC_ND5100_E,
PCCARD_VENDOR_INVALID, PCCARD_PRODUCT_INVALID, 0,
PCCARD_CIS_NDC_ND5100_E },
-1, { 0x00, 0x80, 0xc6 } },
{ { PCCARD_STR_TELECOMDEVICE_TCD_HPC100,
PCCARD_VENDOR_TELECOMDEVICE, PCCARD_PRODUCT_TELECOMDEVICE_TCD_HPC100, 0,
PCCARD_CIS_TELECOMDEVICE_TCD_HPC100 },
-1, { 0x00, 0x40, 0x26 }, NE2000DVF_AX88190 },
{ { PCCARD_STR_MACNICA_ME1_JEIDA,
PCCARD_VENDOR_MACNICA, PCCARD_PRODUCT_MACNICA_ME1_JEIDA, 0,
PCCARD_CIS_MACNICA_ME1_JEIDA },
0x00b8, { 0x08, 0x00, 0x42 } },
#if 0
/* the rest of these are stolen from the linux pcnet pcmcia device
driver. Since I don't know the manfid or cis info strings for
any of them, they're not compiled in until I do. */
{ "APEX MultiCard",
0x0000, 0x0000, NULL, NULL, 0,
0x03f4, { 0x00, 0x20, 0xe5 } },
{ "ASANTE FriendlyNet",
0x0000, 0x0000, NULL, NULL, 0,
0x4910, { 0x00, 0x00, 0x94 } },
{ "Danpex EN-6200P2",
0x0000, 0x0000, NULL, NULL, 0,
0x0110, { 0x00, 0x40, 0xc7 } },
{ "DataTrek NetCard",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0x20, 0xe8 } },
{ "Dayna CommuniCard E",
0x0000, 0x0000, NULL, NULL, 0,
0x0110, { 0x00, 0x80, 0x19 } },
{ "EP-210 Ethernet",
0x0000, 0x0000, NULL, NULL, 0,
0x0110, { 0x00, 0x40, 0x33 } },
{ "ELECOM Laneed LD-CDWA",
0x0000, 0x0000, NULL, NULL, 0,
0x00b8, { 0x08, 0x00, 0x42 } },
{ "Grey Cell GCS2220",
0x0000, 0x0000, NULL, NULL, 0,
0x0000, { 0x00, 0x47, 0x43 } },
{ "Hypertec Ethernet",
0x0000, 0x0000, NULL, NULL, 0,
0x01c0, { 0x00, 0x40, 0x4c } },
{ "IBM CCAE",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x08, 0x00, 0x5a } },
{ "IBM CCAE",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0x04, 0xac } },
{ "IBM CCAE",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0x06, 0x29 } },
{ "IBM FME",
0x0000, 0x0000, NULL, NULL, 0,
0x0374, { 0x00, 0x04, 0xac } },
{ "IBM FME",
0x0000, 0x0000, NULL, NULL, 0,
0x0374, { 0x08, 0x00, 0x5a } },
{ "Katron PE-520",
0x0000, 0x0000, NULL, NULL, 0,
0x0110, { 0x00, 0x40, 0xf6 } },
{ "Kingston KNE-PCM/x",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0xc0, 0xf0 } },
{ "Kingston KNE-PCM/x",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0xe2, 0x0c, 0x0f } },
{ "Kingston KNE-PC2",
0x0000, 0x0000, NULL, NULL, 0,
0x0180, { 0x00, 0xc0, 0xf0 } },
{ "Longshine LCS-8534",
0x0000, 0x0000, NULL, NULL, 0,
0x0000, { 0x08, 0x00, 0x00 } },
{ "Maxtech PCN2000",
0x0000, 0x0000, NULL, NULL, 0,
0x5000, { 0x00, 0x00, 0xe8 } },
{ "NDC Instant-Link",
0x0000, 0x0000, NULL, NULL, 0,
0x003a, { 0x00, 0x80, 0xc6 } },
{ "NE2000 Compatible",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0xa0, 0x0c } },
{ "Network General Sniffer",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0x00, 0x65 } },
{ "Panasonic VEL211",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0x80, 0x45 } },
{ "SCM Ethernet",
0x0000, 0x0000, NULL, NULL, 0,
0x0ff0, { 0x00, 0x20, 0xcb } },
{ "Socket EA",
0x0000, 0x0000, NULL, NULL, 0,
0x4000, { 0x00, 0xc0, 0x1b } },
{ "Volktek NPL-402CT",
0x0000, 0x0000, NULL, NULL, 0,
0x0060, { 0x00, 0x40, 0x05 } },
#endif
{ { PCCARD_STR_ALLIEDTELESIS_LA_PCM,
PCCARD_VENDOR_ALLIEDTELESIS, PCCARD_PRODUCT_ALLIEDTELESIS_LA_PCM, 0,
PCCARD_CIS_ALLIEDTELESIS_LA_PCM },
0x0ff0, { 0x00, 0x00, 0xf4 } },
};
static int
ed_pccard_match(device_t dev)
{
const struct pccard_product *pp;
if ((pp = pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
device_set_desc(dev, pp->pp_name);
return 0;
}
return EIO;
}
/*
* Probe framework for pccards. Replicates the standard framework,
* minus the pccard driver registration and ignores the ether address
* supplied (from the CIS), relying on the probe to find it instead.
*/
static int
ed_pccard_probe(device_t dev)
{
int error;
int flags = device_get_flags(dev);
if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_AX88190) {
error = ed_pccard_ax88190(dev);
goto end2;
}
error = ed_probe_Novell(dev, 0, flags);
if (error == 0)
goto end;
ed_release_resources(dev);
error = ed_probe_WD80x3(dev, 0, flags);
if (error == 0)
goto end;
ed_release_resources(dev);
goto end2;
end:
if (ED_FLAGS_GETTYPE(flags) & ED_FLAGS_LINKSYS)
ed_pccard_Linksys(dev);
end2:
if (error == 0)
error = ed_alloc_irq(dev, 0, 0);
ed_release_resources(dev);
return (error);
}
static int
ed_pccard_attach(device_t dev)
{
int error;
int flags = device_get_flags(dev);
int i;
struct ed_softc *sc = device_get_softc(dev);
u_char sum;
u_char ether_addr[ETHER_ADDR_LEN];
if (sc->port_used > 0)
ed_alloc_port(dev, sc->port_rid, sc->port_used);
if (sc->mem_used)
ed_alloc_memory(dev, sc->mem_rid, sc->mem_used);
ed_alloc_irq(dev, sc->irq_rid, 0);
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET,
edintr, sc, &sc->irq_handle);
if (error) {
printf("setup intr failed %d \n", error);
ed_release_resources(dev);
return (error);
}
if (sc->vendor != ED_VENDOR_LINKSYS) {
pccard_get_ether(dev, ether_addr);
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= ether_addr[i];
if (sum)
bcopy(ether_addr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
}
error = ed_attach(sc, device_get_unit(dev), flags);
#ifndef ED_NO_MIIBUS
if (error == 0 && sc->vendor == ED_VENDOR_LINKSYS) {
/* Probe for an MII bus, but ignore errors. */
ed_pccard_dlink_mii_reset(sc);
sc->mii_readbits = ed_pccard_dlink_mii_readbits;
sc->mii_writebits = ed_pccard_dlink_mii_writebits;
mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
ed_ifmedia_sts);
}
#endif
return (error);
}
static void
ax88190_geteprom(struct ed_softc *sc)
{
int prom[16],i;
u_char tmp;
struct {
unsigned char offset, value;
} pg_seq[] = {
{ED_P0_CR, ED_CR_RD2|ED_CR_STP},/* Select Page0 */
{ED_P0_DCR, 0x01},
{ED_P0_RBCR0, 0x00}, /* Clear the count regs. */
{ED_P0_RBCR1, 0x00},
{ED_P0_IMR, 0x00}, /* Mask completion irq. */
{ED_P0_ISR, 0xff},
{ED_P0_RCR, ED_RCR_MON | ED_RCR_INTT}, /* Set To Monitor */
{ED_P0_TCR, ED_TCR_LB0}, /* loopback mode. */
{ED_P0_RBCR0, 32},
{ED_P0_RBCR1, 0x00},
{ED_P0_RSAR0, 0x00},
{ED_P0_RSAR1, 0x04},
{ED_P0_CR ,ED_CR_RD0 | ED_CR_STA},
};
/* Reset Card */
tmp = ed_asic_inb(sc, ED_NOVELL_RESET);
ed_asic_outb(sc, ED_NOVELL_RESET, tmp);
DELAY(5000);
ed_asic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP);
DELAY(5000);
/* Card Settings */
for (i = 0; i < sizeof(pg_seq) / sizeof(pg_seq[0]); i++)
ed_nic_outb(sc, pg_seq[i].offset, pg_seq[i].value);
/* Get Data */
for (i = 0; i < 16; i++)
prom[i] = ed_asic_inb(sc, 0);
sc->arpcom.ac_enaddr[0] = prom[0] & 0xff;
sc->arpcom.ac_enaddr[1] = prom[0] >> 8;
sc->arpcom.ac_enaddr[2] = prom[1] & 0xff;
sc->arpcom.ac_enaddr[3] = prom[1] >> 8;
sc->arpcom.ac_enaddr[4] = prom[2] & 0xff;
sc->arpcom.ac_enaddr[5] = prom[2] >> 8;
}
static int
ed_pccard_memwrite(device_t dev, off_t offset, u_char byte)
{
int cis_rid;
struct resource *cis;
cis_rid = 0;
cis = bus_alloc_resource(dev, SYS_RES_MEMORY, &cis_rid, 0, ~0,
4 << 10, RF_ACTIVE | RF_SHAREABLE);
if (cis == NULL)
return (ENXIO);
CARD_SET_RES_FLAGS(device_get_parent(dev), dev, SYS_RES_MEMORY,
cis_rid, PCCARD_A_MEM_ATTR);
bus_space_write_1(rman_get_bustag(cis), rman_get_bushandle(cis),
offset, byte);
bus_deactivate_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
bus_release_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
return (0);
}
/*
* Probe the Ethernet MAC addrees for PCMCIA Linksys EtherFast 10/100
* and compatible cards (DL10019C Ethernet controller).
*
* Note: The PAO patches try to use more memory for the card, but that
* seems to fail for my card. A future optimization would add this back
* conditionally.
*/
static int
ed_pccard_Linksys(device_t dev)
{
struct ed_softc *sc = device_get_softc(dev);
u_char sum;
int i;
/*
* Linksys registers(offset from ASIC base)
*
* 0x04-0x09 : Physical Address Register 0-5 (PAR0-PAR5)
* 0x0A : Card ID Register (CIR)
* 0x0B : Check Sum Register (SR)
*/
for (sum = 0, i = 0x04; i < 0x0c; i++)
sum += ed_asic_inb(sc, i);
if (sum != 0xff)
return (0); /* invalid DL10019C */
for (i = 0; i < ETHER_ADDR_LEN; i++) {
sc->arpcom.ac_enaddr[i] = ed_asic_inb(sc, 0x04 + i);
}
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
sc->isa16bit = 1;
sc->vendor = ED_VENDOR_LINKSYS;
sc->type = ED_TYPE_NE2000;
sc->type_str = "Linksys";
return (1);
}
/*
* Special setup for AX88190
*/
static int
ed_pccard_ax88190(device_t dev)
{
int error;
int flags = device_get_flags(dev);
int iobase;
struct ed_softc *sc = device_get_softc(dev);
/* Allocate the port resource during setup. */
error = ed_alloc_port(dev, 0, ED_NOVELL_IO_PORTS);
if (error)
return (error);
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
sc->chip_type = ED_CHIP_TYPE_AX88190;
/*
* Set Attribute Memory IOBASE Register
*/
iobase = rman_get_start(sc->port_res);
ed_pccard_memwrite(dev, ED_AX88190_IOBASE0, iobase & 0xff);
ed_pccard_memwrite(dev, ED_AX88190_IOBASE1, (iobase >> 8) & 0xff);
ax88190_geteprom(sc);
ed_release_resources(dev);
error = ed_probe_Novell(dev, 0, flags);
return (error);
}
#ifndef ED_NO_MIIBUS
/* MII bit-twiddling routines for cards using Dlink chipset */
#define DLINK_MIISET(sc, x) ed_asic_outb(sc, ED_DLINK_MIIBUS, \
ed_asic_inb(sc, ED_DLINK_MIIBUS) | (x))
#define DLINK_MIICLR(sc, x) ed_asic_outb(sc, ED_DLINK_MIIBUS, \
ed_asic_inb(sc, ED_DLINK_MIIBUS) & ~(x))
static void
ed_pccard_dlink_mii_reset(sc)
struct ed_softc *sc;
{
ed_asic_outb(sc, ED_DLINK_MIIBUS, 0);
DELAY(10);
DLINK_MIISET(sc, ED_DLINK_MII_RESET2);
DELAY(10);
DLINK_MIISET(sc, ED_DLINK_MII_RESET1);
DELAY(10);
DLINK_MIICLR(sc, ED_DLINK_MII_RESET1);
DELAY(10);
DLINK_MIICLR(sc, ED_DLINK_MII_RESET2);
DELAY(10);
}
static void
ed_pccard_dlink_mii_writebits(sc, val, nbits)
struct ed_softc *sc;
u_int val;
int nbits;
{
int i;
DLINK_MIISET(sc, ED_DLINK_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
if ((val >> i) & 1)
DLINK_MIISET(sc, ED_DLINK_MII_DATAOUT);
else
DLINK_MIICLR(sc, ED_DLINK_MII_DATAOUT);
DELAY(10);
DLINK_MIISET(sc, ED_DLINK_MII_CLK);
DELAY(10);
DLINK_MIICLR(sc, ED_DLINK_MII_CLK);
DELAY(10);
}
}
static u_int
ed_pccard_dlink_mii_readbits(sc, nbits)
struct ed_softc *sc;
int nbits;
{
int i;
u_int val = 0;
DLINK_MIICLR(sc, ED_DLINK_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
DLINK_MIISET(sc, ED_DLINK_MII_CLK);
DELAY(10);
val <<= 1;
if (ed_asic_inb(sc, ED_DLINK_MIIBUS) & ED_DLINK_MII_DATATIN)
val++;
DLINK_MIICLR(sc, ED_DLINK_MII_CLK);
DELAY(10);
}
return val;
}
#endif
static device_method_t ed_pccard_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pccard_compat_probe),
DEVMETHOD(device_attach, pccard_compat_attach),
DEVMETHOD(device_detach, ed_pccard_detach),
#ifndef ED_NO_MIIBUS
/* Bus interface */
DEVMETHOD(bus_child_detached, ed_child_detached),
/* MII interface */
DEVMETHOD(miibus_readreg, ed_miibus_readreg),
DEVMETHOD(miibus_writereg, ed_miibus_writereg),
#endif
/* Card interface */
DEVMETHOD(card_compat_match, ed_pccard_match),
DEVMETHOD(card_compat_probe, ed_pccard_probe),
DEVMETHOD(card_compat_attach, ed_pccard_attach),
{ 0, 0 }
};
static driver_t ed_pccard_driver = {
"ed",
ed_pccard_methods,
sizeof(struct ed_softc)
};
DRIVER_MODULE(if_ed, pccard, ed_pccard_driver, ed_devclass, 0, 0);
#ifndef ED_NO_MIIBUS
DRIVER_MODULE(miibus, ed, miibus_driver, miibus_devclass, 0, 0);
#endif
Reference in New Issue View Git Blame Copy Permalink