freebsd-nq/sys/dev/pst/pst-pci.c
Søren Schmidt 27da7e6f24 Finally first shot at a driver for the Promise SuperTrak SX6000 ATA RAID
controller. Some testing has already been done, but its still greenish.
RAID's has to be setup via the BIOS on the SuperTrak, but all RAID
types are supported by the driver. The SuperTrak rebuilds failed arrays
on the fly and supports spare disks etc etc...

Add "device	pst" to your config file to use.

As usual bugsreports, suggestions etc are welcome...

Development sponsored by:	Advanis
Hardware donated by:		Promise Inc.
2002-07-31 18:26:30 +00:00

118 lines
3.6 KiB
C

/*-
* Copyright (c) 2001,2002 Søren Schmidt <sos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/stdarg.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include "dev/pst/pst-iop.h"
static int
iop_pci_probe(device_t dev)
{
/* tested with actual hardware kindly donated by Promise */
if (pci_get_devid(dev) == 0x19628086 && pci_get_subvendor(dev) == 0x105a) {
device_set_desc(dev, "Promise SuperTrak SX6000 ATA RAID controller");
return 0;
}
/* this should work as well (not tested no hardware) */
if (pci_get_devid(dev) == 0x09628086 && pci_get_subvendor(dev) == 0x105a) {
device_set_desc(dev, "Promise SuperTrak 100 ATA RAID controller");
return 0;
}
return ENXIO;
}
static int
iop_pci_attach(device_t dev)
{
struct iop_softc *sc = device_get_softc(dev);
int rid;
bzero(sc, sizeof(struct iop_softc));
/* get resources */
rid = 0x10;
sc->r_mem =
bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, 0, ~0, 1, RF_ACTIVE);
if (!sc->r_mem)
return 0;
rid = 0x00;
sc->r_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0,
1, RF_SHAREABLE | RF_ACTIVE);
/* now setup the infrastructure to talk to the device */
pci_write_config(dev, PCIR_COMMAND,
pci_read_config(dev, PCIR_COMMAND, 1) |
PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN, 1);
sc->ibase = rman_get_virtual(sc->r_mem);
sc->phys_ibase = vtophys(sc->ibase);
sc->reg = (struct i2o_registers *)sc->ibase;
sc->dev = dev;
if (!iop_init(sc))
return 0;
return bus_generic_attach(dev);
}
static device_method_t pst_pci_methods[] = {
DEVMETHOD(device_probe, iop_pci_probe),
DEVMETHOD(device_attach, iop_pci_attach),
{ 0, 0 }
};
static driver_t pst_pci_driver = {
"pstpci",
pst_pci_methods,
sizeof(struct iop_softc),
};
static devclass_t pst_pci_devclass;
DRIVER_MODULE(pstpci, pci, pst_pci_driver, pst_pci_devclass, 0, 0);