freebsd-nq/sys/mips/include/cpufunc.h
Warner Losh 45d426a34e FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64,
mips32r2 and mips64r2 (and close relatives) processors.  There
presently is support for ADMtek ADM5120, A mips 4Kc in a malta board,
the RB533 routerboard (based on IDT RC32434) and some preliminary
support for sibtye/broadcom designs.  Other hardware support will be
forthcomcing.

This port boots multiuser under gxemul emulating the malta board and
also bootstraps on the hardware whose support is forthcoming...

Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard,
Randall Stewert and others that have contributed to the mips2 and/or
mips2-jnpr perforce branches.  Juniper contirbuted a generic mips port
late in the life cycle of the misp2 branch.  Warner Losh merged the
mips2 and Juniper code bases, and others list above have worked for
the past several months to get to multiuser.

In addition, the mips2 work owe a debt to the trail blazing efforts of
the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00

347 lines
8.5 KiB
C

/* $OpenBSD: pio.h,v 1.2 1998/09/15 10:50:12 pefo Exp $ */
/*
* Copyright (c) 1995-1999 Per Fogelstrom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Per Fogelstrom.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* JNPR: cpufunc.h,v 1.5 2007/08/09 11:23:32 katta
* $FreeBSD$
*/
#ifndef _MACHINE_CPUFUNC_H_
#define _MACHINE_CPUFUNC_H_
#include <sys/types.h>
#include <machine/cpuregs.h>
/*
* These functions are required by user-land atomi ops
*/
static __inline void
mips_barrier(void)
{
__asm __volatile (".set noreorder\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
".set reorder\n\t"
: : : "memory");
}
static __inline void
mips_wbflush(void)
{
__asm __volatile ("sync" : : : "memory");
mips_barrier();
#if 0
__asm __volatile("mtc0 %0, $12\n" /* MIPS_COP_0_STATUS */
: : "r" (flag));
#endif
}
static __inline void
mips_read_membar(void)
{
/* Nil */
}
static __inline void
mips_write_membar(void)
{
mips_wbflush();
}
#ifdef _KERNEL
static __inline void
mips_tlbp(void)
{
__asm __volatile ("tlbp");
mips_barrier();
#if 0
register_t ret;
register_t tmp;
__asm __volatile("mfc0 %0, $12\n" /* MIPS_COP_0_STATUS */
"and %1, %0, $~1\n" /* MIPS_SR_INT_IE */
"mtc0 %1, $12\n" /* MIPS_COP_0_STATUS */
: "=r" (ret), "=r" (tmp));
return (ret);
#endif
}
static __inline void
mips_tlbr(void)
{
__asm __volatile ("tlbr");
mips_barrier();
}
static __inline void
mips_tlbwi(void)
{
__asm __volatile ("tlbwi");
mips_barrier();
#if 0
__asm __volatile("mfc %0, $12\n" /* MIPS_COP_0_STATUS */
"or %0, %0, $1\n" /* MIPS_SR_INT_IE */
"mtc0 %0, $12\n" /* MIPS_COP_0_STATUS */
: "=r" (tmp));
#endif
}
static __inline void
mips_tlbwr(void)
{
__asm __volatile ("tlbwr");
mips_barrier();
}
#if 0 /* XXX mips64 */
#define MIPS_RDRW64_COP0(n,r) \
static __inline uint64_t \
mips_rd_ ## n (void) \
{ \
int v0; \
__asm __volatile ("dmfc0 %[v0], $"__XSTRING(r)";" \
: [v0] "=&r"(v0)); \
mips_barrier(); \
return (v0); \
} \
static __inline void \
mips_wr_ ## n (uint64_t a0) \
{ \
__asm __volatile ("dmtc0 %[a0], $"__XSTRING(r)";" \
__XSTRING(COP0_SYNC)";" \
"nop;" \
"nop;" \
: \
: [a0] "r"(a0)); \
mips_barrier(); \
} struct __hack
MIPS_RDRW64_COP0(entrylo0, MIPS_COP_0_TLB_LO0);
MIPS_RDRW64_COP0(entrylo1, MIPS_COP_0_TLB_LO1);
MIPS_RDRW64_COP0(entryhi, MIPS_COP_0_TLB_HI);
MIPS_RDRW64_COP0(pagemask, MIPS_COP_0_TLB_PG_MASK);
MIPS_RDRW64_COP0(xcontext, MIPS_COP_0_TLB_XCONTEXT);
#undef MIPS_RDRW64_COP0
#endif
#define MIPS_RDRW32_COP0(n,r) \
static __inline uint32_t \
mips_rd_ ## n (void) \
{ \
int v0; \
__asm __volatile ("mfc0 %[v0], $"__XSTRING(r)";" \
: [v0] "=&r"(v0)); \
mips_barrier(); \
return (v0); \
} \
static __inline void \
mips_wr_ ## n (uint32_t a0) \
{ \
__asm __volatile ("mtc0 %[a0], $"__XSTRING(r)";" \
__XSTRING(COP0_SYNC)";" \
"nop;" \
"nop;" \
: \
: [a0] "r"(a0)); \
mips_barrier(); \
} struct __hack
#ifdef TARGET_OCTEON
static __inline void mips_sync_icache (void)
{
__asm __volatile (
".set mips64\n"
".word 0x041f0000\n"
"nop\n"
".set mips0\n"
: : );
}
#endif
MIPS_RDRW32_COP0(compare, MIPS_COP_0_COMPARE);
MIPS_RDRW32_COP0(config, MIPS_COP_0_CONFIG);
MIPS_RDRW32_COP0(count, MIPS_COP_0_COUNT);
MIPS_RDRW32_COP0(index, MIPS_COP_0_TLB_INDEX);
MIPS_RDRW32_COP0(wired, MIPS_COP_0_TLB_WIRED);
MIPS_RDRW32_COP0(cause, MIPS_COP_0_CAUSE);
MIPS_RDRW32_COP0(status, MIPS_COP_0_STATUS);
/* XXX: Some of these registers are specific to MIPS32. */
MIPS_RDRW32_COP0(entrylo0, MIPS_COP_0_TLB_LO0);
MIPS_RDRW32_COP0(entrylo1, MIPS_COP_0_TLB_LO1);
MIPS_RDRW32_COP0(entrylow, MIPS_COP_0_TLB_LOW);
MIPS_RDRW32_COP0(entryhi, MIPS_COP_0_TLB_HI);
MIPS_RDRW32_COP0(pagemask, MIPS_COP_0_TLB_PG_MASK);
MIPS_RDRW32_COP0(prid, MIPS_COP_0_PRID);
MIPS_RDRW32_COP0(watchlo, MIPS_COP_0_WATCH_LO);
MIPS_RDRW32_COP0(watchhi, MIPS_COP_0_WATCH_HI);
static __inline uint32_t
mips_rd_config_sel1(void)
{
int v0;
__asm __volatile("mfc0 %[v0], $16, 1 ;"
: [v0] "=&r" (v0));
mips_barrier();
return (v0);
}
#undef MIPS_RDRW32_COP0
static __inline register_t
intr_disable(void)
{
register_t s;
s = mips_rd_status();
mips_wr_status(s & ~MIPS_SR_INT_IE);
return (s);
}
static __inline register_t
intr_enable(void)
{
register_t s;
s = mips_rd_status();
mips_wr_status(s | MIPS_SR_INT_IE);
return (s);
}
#define intr_restore(s) mips_wr_status((s))
static __inline void
breakpoint(void)
{
__asm __volatile ("break");
}
#endif /* _KERNEL */
#define readb(va) (*(volatile uint8_t *) (va))
#define readw(va) (*(volatile uint16_t *) (va))
#define readl(va) (*(volatile uint32_t *) (va))
#define writeb(va, d) (*(volatile uint8_t *) (va) = (d))
#define writew(va, d) (*(volatile uint16_t *) (va) = (d))
#define writel(va, d) (*(volatile uint32_t *) (va) = (d))
/*
* I/O macros.
*/
#define outb(a,v) (*(volatile unsigned char*)(a) = (v))
#define out8(a,v) (*(volatile unsigned char*)(a) = (v))
#define outw(a,v) (*(volatile unsigned short*)(a) = (v))
#define out16(a,v) outw(a,v)
#define outl(a,v) (*(volatile unsigned int*)(a) = (v))
#define out32(a,v) outl(a,v)
#define inb(a) (*(volatile unsigned char*)(a))
#define in8(a) (*(volatile unsigned char*)(a))
#define inw(a) (*(volatile unsigned short*)(a))
#define in16(a) inw(a)
#define inl(a) (*(volatile unsigned int*)(a))
#define in32(a) inl(a)
#define out8rb(a,v) (*(volatile unsigned char*)(a) = (v))
#define out16rb(a,v) (__out16rb((volatile uint16_t *)(a), v))
#define out32rb(a,v) (__out32rb((volatile uint32_t *)(a), v))
#define in8rb(a) (*(volatile unsigned char*)(a))
#define in16rb(a) (__in16rb((volatile uint16_t *)(a)))
#define in32rb(a) (__in32rb((volatile uint32_t *)(a)))
#define _swap_(x) (((x) >> 24) | ((x) << 24) | \
(((x) >> 8) & 0xff00) | (((x) & 0xff00) << 8))
static __inline void __out32rb(volatile uint32_t *, uint32_t);
static __inline void __out16rb(volatile uint16_t *, uint16_t);
static __inline uint32_t __in32rb(volatile uint32_t *);
static __inline uint16_t __in16rb(volatile uint16_t *);
static __inline void
__out32rb(volatile uint32_t *a, uint32_t v)
{
uint32_t _v_ = v;
_v_ = _swap_(_v_);
out32(a, _v_);
}
static __inline void
__out16rb(volatile uint16_t *a, uint16_t v)
{
uint16_t _v_;
_v_ = ((v >> 8) & 0xff) | (v << 8);
out16(a, _v_);
}
static __inline uint32_t
__in32rb(volatile uint32_t *a)
{
uint32_t _v_;
_v_ = in32(a);
_v_ = _swap_(_v_);
return _v_;
}
static __inline uint16_t
__in16rb(volatile uint16_t *a)
{
uint16_t _v_;
_v_ = in16(a);
_v_ = ((_v_ >> 8) & 0xff) | (_v_ << 8);
return _v_;
}
void insb(uint8_t *, uint8_t *,int);
void insw(uint16_t *, uint16_t *,int);
void insl(uint32_t *, uint32_t *,int);
void outsb(uint8_t *, const uint8_t *,int);
void outsw(uint16_t *, const uint16_t *,int);
void outsl(uint32_t *, const uint32_t *,int);
u_int loadandclear(volatile u_int *addr);
#endif /* !_MACHINE_CPUFUNC_H_ */