freebsd-nq/sys/netinet6/ip6_forward.c
Sam Leffler b9234fafa0 Tie new "Fast IPsec" code into the build. This involves the usual
configuration stuff as well as conditional code in the IPv4 and IPv6
areas.  Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).

As noted previously, don't use FAST_IPSEC with INET6 at the moment.

Reviewed by:	KAME, rwatson
Approved by:	silence
Supported by:	Vernier Networks
2002-10-16 02:25:05 +00:00

596 lines
15 KiB
C

/* $FreeBSD$ */
/* $KAME: ip6_forward.c,v 1.69 2001/05/17 03:48:30 itojun Exp $ */
/*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include "opt_ip6fw.h"
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/domain.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <net/route.h>
#ifdef PFIL_HOOKS
#include <net/pfil.h>
#endif
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet6/in6_var.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#include <netinet/icmp6.h>
#include <netinet6/nd6.h>
#include <netinet/in_pcb.h>
#ifdef IPSEC
#include <netinet6/ipsec.h>
#ifdef INET6
#include <netinet6/ipsec6.h>
#endif
#include <netkey/key.h>
#endif /* IPSEC */
#ifdef FAST_IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#include <netipsec/key.h>
#define IPSEC
#endif /* FAST_IPSEC */
#include <netinet6/ip6_fw.h>
#include <net/net_osdep.h>
#include <netinet6/ip6protosw.h>
struct route_in6 ip6_forward_rt;
/*
* Forward a packet. If some error occurs return the sender
* an icmp packet. Note we can't always generate a meaningful
* icmp message because icmp doesn't have a large enough repertoire
* of codes and types.
*
* If not forwarding, just drop the packet. This could be confusing
* if ipforwarding was zero but some routing protocol was advancing
* us as a gateway to somewhere. However, we must let the routing
* protocol deal with that.
*
*/
void
ip6_forward(m, srcrt)
struct mbuf *m;
int srcrt;
{
struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
struct sockaddr_in6 *dst;
struct rtentry *rt;
int error, type = 0, code = 0;
struct mbuf *mcopy = NULL;
struct ifnet *origifp; /* maybe unnecessary */
#ifdef PFIL_HOOKS
struct packet_filter_hook *pfh;
struct mbuf *m1;
int rv;
#endif /* PFIL_HOOKS */
#ifdef IPSEC
struct secpolicy *sp = NULL;
#endif
#ifdef IPSEC
/*
* Check AH/ESP integrity.
*/
/*
* Don't increment ip6s_cantforward because this is the check
* before forwarding packet actually.
*/
if (ipsec6_in_reject(m, NULL)) {
#if !defined(FAST_IPSEC)
ipsec6stat.in_polvio++;
#endif
m_freem(m);
return;
}
#endif /* IPSEC */
/*
* Do not forward packets to multicast destination (should be handled
* by ip6_mforward().
* Do not forward packets with unspecified source. It was discussed
* in July 2000, on ipngwg mailing list.
*/
if ((m->m_flags & (M_BCAST|M_MCAST)) != 0 ||
IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst) ||
IN6_IS_ADDR_UNSPECIFIED(&ip6->ip6_src)) {
ip6stat.ip6s_cantforward++;
/* XXX in6_ifstat_inc(rt->rt_ifp, ifs6_in_discard) */
if (ip6_log_time + ip6_log_interval < time_second) {
ip6_log_time = time_second;
log(LOG_DEBUG,
"cannot forward "
"from %s to %s nxt %d received on %s\n",
ip6_sprintf(&ip6->ip6_src),
ip6_sprintf(&ip6->ip6_dst),
ip6->ip6_nxt,
if_name(m->m_pkthdr.rcvif));
}
m_freem(m);
return;
}
if (ip6->ip6_hlim <= IPV6_HLIMDEC) {
/* XXX in6_ifstat_inc(rt->rt_ifp, ifs6_in_discard) */
icmp6_error(m, ICMP6_TIME_EXCEEDED,
ICMP6_TIME_EXCEED_TRANSIT, 0);
return;
}
ip6->ip6_hlim -= IPV6_HLIMDEC;
/*
* Save at most ICMPV6_PLD_MAXLEN (= the min IPv6 MTU -
* size of IPv6 + ICMPv6 headers) bytes of the packet in case
* we need to generate an ICMP6 message to the src.
* Thanks to M_EXT, in most cases copy will not occur.
*
* It is important to save it before IPsec processing as IPsec
* processing may modify the mbuf.
*/
mcopy = m_copy(m, 0, imin(m->m_pkthdr.len, ICMPV6_PLD_MAXLEN));
#ifdef IPSEC
/* get a security policy for this packet */
sp = ipsec6_getpolicybyaddr(m, IPSEC_DIR_OUTBOUND, IP_FORWARDING,
&error);
if (sp == NULL) {
ipsec6stat.out_inval++;
ip6stat.ip6s_cantforward++;
if (mcopy) {
#if 0
/* XXX: what icmp ? */
#else
m_freem(mcopy);
#endif
}
m_freem(m);
return;
}
error = 0;
/* check policy */
switch (sp->policy) {
case IPSEC_POLICY_DISCARD:
/*
* This packet is just discarded.
*/
ipsec6stat.out_polvio++;
ip6stat.ip6s_cantforward++;
key_freesp(sp);
if (mcopy) {
#if 0
/* XXX: what icmp ? */
#else
m_freem(mcopy);
#endif
}
m_freem(m);
return;
case IPSEC_POLICY_BYPASS:
case IPSEC_POLICY_NONE:
/* no need to do IPsec. */
key_freesp(sp);
goto skip_ipsec;
case IPSEC_POLICY_IPSEC:
if (sp->req == NULL) {
/* XXX should be panic ? */
printf("ip6_forward: No IPsec request specified.\n");
ip6stat.ip6s_cantforward++;
key_freesp(sp);
if (mcopy) {
#if 0
/* XXX: what icmp ? */
#else
m_freem(mcopy);
#endif
}
m_freem(m);
return;
}
/* do IPsec */
break;
case IPSEC_POLICY_ENTRUST:
default:
/* should be panic ?? */
printf("ip6_forward: Invalid policy found. %d\n", sp->policy);
key_freesp(sp);
goto skip_ipsec;
}
{
struct ipsec_output_state state;
/*
* All the extension headers will become inaccessible
* (since they can be encrypted).
* Don't panic, we need no more updates to extension headers
* on inner IPv6 packet (since they are now encapsulated).
*
* IPv6 [ESP|AH] IPv6 [extension headers] payload
*/
bzero(&state, sizeof(state));
state.m = m;
state.ro = NULL; /* update at ipsec6_output_tunnel() */
state.dst = NULL; /* update at ipsec6_output_tunnel() */
error = ipsec6_output_tunnel(&state, sp, 0);
m = state.m;
key_freesp(sp);
if (error) {
/* mbuf is already reclaimed in ipsec6_output_tunnel. */
switch (error) {
case EHOSTUNREACH:
case ENETUNREACH:
case EMSGSIZE:
case ENOBUFS:
case ENOMEM:
break;
default:
printf("ip6_output (ipsec): error code %d\n", error);
/* fall through */
case ENOENT:
/* don't show these error codes to the user */
break;
}
ip6stat.ip6s_cantforward++;
if (mcopy) {
#if 0
/* XXX: what icmp ? */
#else
m_freem(mcopy);
#endif
}
m_freem(m);
return;
}
}
skip_ipsec:
#endif /* IPSEC */
dst = (struct sockaddr_in6 *)&ip6_forward_rt.ro_dst;
if (!srcrt) {
/*
* ip6_forward_rt.ro_dst.sin6_addr is equal to ip6->ip6_dst
*/
if (ip6_forward_rt.ro_rt == 0 ||
(ip6_forward_rt.ro_rt->rt_flags & RTF_UP) == 0) {
if (ip6_forward_rt.ro_rt) {
RTFREE(ip6_forward_rt.ro_rt);
ip6_forward_rt.ro_rt = 0;
}
/* this probably fails but give it a try again */
rtalloc_ign((struct route *)&ip6_forward_rt,
RTF_PRCLONING);
}
if (ip6_forward_rt.ro_rt == 0) {
ip6stat.ip6s_noroute++;
in6_ifstat_inc(m->m_pkthdr.rcvif, ifs6_in_noroute);
if (mcopy) {
icmp6_error(mcopy, ICMP6_DST_UNREACH,
ICMP6_DST_UNREACH_NOROUTE, 0);
}
m_freem(m);
return;
}
} else if ((rt = ip6_forward_rt.ro_rt) == 0 ||
!IN6_ARE_ADDR_EQUAL(&ip6->ip6_dst, &dst->sin6_addr)) {
if (ip6_forward_rt.ro_rt) {
RTFREE(ip6_forward_rt.ro_rt);
ip6_forward_rt.ro_rt = 0;
}
bzero(dst, sizeof(*dst));
dst->sin6_len = sizeof(struct sockaddr_in6);
dst->sin6_family = AF_INET6;
dst->sin6_addr = ip6->ip6_dst;
rtalloc_ign((struct route *)&ip6_forward_rt, RTF_PRCLONING);
if (ip6_forward_rt.ro_rt == 0) {
ip6stat.ip6s_noroute++;
in6_ifstat_inc(m->m_pkthdr.rcvif, ifs6_in_noroute);
if (mcopy) {
icmp6_error(mcopy, ICMP6_DST_UNREACH,
ICMP6_DST_UNREACH_NOROUTE, 0);
}
m_freem(m);
return;
}
}
rt = ip6_forward_rt.ro_rt;
/*
* Scope check: if a packet can't be delivered to its destination
* for the reason that the destination is beyond the scope of the
* source address, discard the packet and return an icmp6 destination
* unreachable error with Code 2 (beyond scope of source address).
* [draft-ietf-ipngwg-icmp-v3-02.txt, Section 3.1]
*/
if (in6_addr2scopeid(m->m_pkthdr.rcvif, &ip6->ip6_src) !=
in6_addr2scopeid(rt->rt_ifp, &ip6->ip6_src)) {
ip6stat.ip6s_cantforward++;
ip6stat.ip6s_badscope++;
in6_ifstat_inc(rt->rt_ifp, ifs6_in_discard);
if (ip6_log_time + ip6_log_interval < time_second) {
ip6_log_time = time_second;
log(LOG_DEBUG,
"cannot forward "
"src %s, dst %s, nxt %d, rcvif %s, outif %s\n",
ip6_sprintf(&ip6->ip6_src),
ip6_sprintf(&ip6->ip6_dst),
ip6->ip6_nxt,
if_name(m->m_pkthdr.rcvif), if_name(rt->rt_ifp));
}
if (mcopy)
icmp6_error(mcopy, ICMP6_DST_UNREACH,
ICMP6_DST_UNREACH_BEYONDSCOPE, 0);
m_freem(m);
return;
}
if (m->m_pkthdr.len > rt->rt_ifp->if_mtu) {
in6_ifstat_inc(rt->rt_ifp, ifs6_in_toobig);
if (mcopy) {
u_long mtu;
#ifdef IPSEC
struct secpolicy *sp;
int ipsecerror;
size_t ipsechdrsiz;
#endif
mtu = rt->rt_ifp->if_mtu;
#ifdef IPSEC
/*
* When we do IPsec tunnel ingress, we need to play
* with if_mtu value (decrement IPsec header size
* from mtu value). The code is much simpler than v4
* case, as we have the outgoing interface for
* encapsulated packet as "rt->rt_ifp".
*/
sp = ipsec6_getpolicybyaddr(mcopy, IPSEC_DIR_OUTBOUND,
IP_FORWARDING, &ipsecerror);
if (sp) {
ipsechdrsiz = ipsec6_hdrsiz(mcopy,
IPSEC_DIR_OUTBOUND, NULL);
if (ipsechdrsiz < mtu)
mtu -= ipsechdrsiz;
}
/*
* if mtu becomes less than minimum MTU,
* tell minimum MTU (and I'll need to fragment it).
*/
if (mtu < IPV6_MMTU)
mtu = IPV6_MMTU;
#endif
icmp6_error(mcopy, ICMP6_PACKET_TOO_BIG, 0, mtu);
}
m_freem(m);
return;
}
if (rt->rt_flags & RTF_GATEWAY)
dst = (struct sockaddr_in6 *)rt->rt_gateway;
/*
* If we are to forward the packet using the same interface
* as one we got the packet from, perhaps we should send a redirect
* to sender to shortcut a hop.
* Only send redirect if source is sending directly to us,
* and if packet was not source routed (or has any options).
* Also, don't send redirect if forwarding using a route
* modified by a redirect.
*/
if (rt->rt_ifp == m->m_pkthdr.rcvif && !srcrt &&
(rt->rt_flags & (RTF_DYNAMIC|RTF_MODIFIED)) == 0) {
if ((rt->rt_ifp->if_flags & IFF_POINTOPOINT) != 0) {
/*
* If the incoming interface is equal to the outgoing
* one, and the link attached to the interface is
* point-to-point, then it will be highly probable
* that a routing loop occurs. Thus, we immediately
* drop the packet and send an ICMPv6 error message.
*
* type/code is based on suggestion by Rich Draves.
* not sure if it is the best pick.
*/
icmp6_error(mcopy, ICMP6_DST_UNREACH,
ICMP6_DST_UNREACH_ADDR, 0);
m_freem(m);
return;
}
type = ND_REDIRECT;
}
/*
* Check with the firewall...
*/
if (ip6_fw_enable && ip6_fw_chk_ptr) {
u_short port = 0;
/* If ipfw says divert, we have to just drop packet */
if ((*ip6_fw_chk_ptr)(&ip6, rt->rt_ifp, &port, &m)) {
m_freem(m);
goto freecopy;
}
if (!m)
goto freecopy;
}
/*
* Fake scoped addresses. Note that even link-local source or
* destinaion can appear, if the originating node just sends the
* packet to us (without address resolution for the destination).
* Since both icmp6_error and icmp6_redirect_output fill the embedded
* link identifiers, we can do this stuff after making a copy for
* returning an error.
*/
if ((rt->rt_ifp->if_flags & IFF_LOOPBACK) != 0) {
/*
* See corresponding comments in ip6_output.
* XXX: but is it possible that ip6_forward() sends a packet
* to a loopback interface? I don't think so, and thus
* I bark here. (jinmei@kame.net)
* XXX: it is common to route invalid packets to loopback.
* also, the codepath will be visited on use of ::1 in
* rthdr. (itojun)
*/
#if 1
if (0)
#else
if ((rt->rt_flags & (RTF_BLACKHOLE|RTF_REJECT)) == 0)
#endif
{
printf("ip6_forward: outgoing interface is loopback. "
"src %s, dst %s, nxt %d, rcvif %s, outif %s\n",
ip6_sprintf(&ip6->ip6_src),
ip6_sprintf(&ip6->ip6_dst),
ip6->ip6_nxt, if_name(m->m_pkthdr.rcvif),
if_name(rt->rt_ifp));
}
/* we can just use rcvif in forwarding. */
origifp = m->m_pkthdr.rcvif;
}
else
origifp = rt->rt_ifp;
#ifndef SCOPEDROUTING
/*
* clear embedded scope identifiers if necessary.
* in6_clearscope will touch the addresses only when necessary.
*/
in6_clearscope(&ip6->ip6_src);
in6_clearscope(&ip6->ip6_dst);
#endif
#ifdef PFIL_HOOKS
/*
* Run through list of hooks for output packets.
*/
m1 = m;
pfh = pfil_hook_get(PFIL_OUT, &inet6sw[ip6_protox[IPPROTO_IPV6]].pr_pfh);
for (; pfh; pfh = pfh->pfil_link.tqe_next)
if (pfh->pfil_func) {
rv = pfh->pfil_func(ip6, sizeof(*ip6),
rt->rt_ifp, 1, &m1);
if (rv) {
error = EHOSTUNREACH;
goto freecopy;
}
m = m1;
if (m == NULL)
goto freecopy;
ip6 = mtod(m, struct ip6_hdr *);
}
#endif /* PFIL_HOOKS */
error = nd6_output(rt->rt_ifp, origifp, m, dst, rt);
if (error) {
in6_ifstat_inc(rt->rt_ifp, ifs6_out_discard);
ip6stat.ip6s_cantforward++;
} else {
ip6stat.ip6s_forward++;
in6_ifstat_inc(rt->rt_ifp, ifs6_out_forward);
if (type)
ip6stat.ip6s_redirectsent++;
else {
if (mcopy)
goto freecopy;
}
}
if (mcopy == NULL)
return;
switch (error) {
case 0:
#if 1
if (type == ND_REDIRECT) {
icmp6_redirect_output(mcopy, rt);
return;
}
#endif
goto freecopy;
case EMSGSIZE:
/* xxx MTU is constant in PPP? */
goto freecopy;
case ENOBUFS:
/* Tell source to slow down like source quench in IP? */
goto freecopy;
case ENETUNREACH: /* shouldn't happen, checked above */
case EHOSTUNREACH:
case ENETDOWN:
case EHOSTDOWN:
default:
type = ICMP6_DST_UNREACH;
code = ICMP6_DST_UNREACH_ADDR;
break;
}
icmp6_error(mcopy, type, code, 0);
return;
freecopy:
m_freem(mcopy);
return;
}