freebsd-nq

History

Stefan Eßer a9ad937362 Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.		1997-05-28 10:01:03 +00:00
..
aic7870.c	The register definitions are now in the compile directory.	1997-03-16 07:12:36 +00:00
brktree_reg.h	1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu>	1997-05-01 00:16:31 +00:00
brooktree848.c	use frames instead of fields, and restore full meteor compatibility for	1997-05-05 20:54:54 +00:00
bt9xx.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
cy_pci.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
cy_pcireg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
dc21040.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
if_de.c	Recognize ZNYX 314 cards that have a MAC address with the low bit set.	1997-04-05 07:59:41 +00:00
if_ed_p.c	Rearrange pci network card identification for easier additions.	1997-04-18 04:44:37 +00:00
if_en_pci.c	import Chuck Cranor's ATM driver	1997-05-09 07:48:14 +00:00
if_fpa.c	Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include	1997-03-24 11:25:10 +00:00
if_fxp.c	Check that the received packet length indicated by the card is at least	1997-04-23 01:44:30 +00:00
if_fxpreg.h	Added support for newer cards that have the DP83840A PHY chip.	1997-03-21 08:00:13 +00:00
if_lnc_p.c	Deleted <pc98/pc98/pc98_device.h>.	1997-04-04 16:44:52 +00:00
if_sr_p.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
if_vx_pci.c	Some imporvemnets to the vx driver.	1996-12-02 18:38:37 +00:00
locate.pl
meteor_reg.h
meteor.c	Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include	1997-03-24 11:25:10 +00:00
ncr.c	Fixed the type of timeout functions and removed casts that hid the	1997-04-20 15:48:17 +00:00
ncrreg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
pci_compat.c	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
pci_ioctl.h	Add PCI LKM support.	1997-01-21 23:23:40 +00:00
pci.c	Two minor changes to the code that builds the pci map array:	1997-05-28 10:01:03 +00:00
pcireg.h	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
pcisupport.c	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
pcivar.h	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
README.bt848	Fixed omission of reference to ioctl_bt848.h when installing on 2.2.	1997-05-01 00:42:54 +00:00
README.de	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
README.de-le	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
scsiiom.c	Tekram supplied driver for their DC390 and DC390T controllers.	1996-12-15 23:40:48 +00:00
tek390.c	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
tek390.h	Rename DIAGNOSTIC to DMA_DIAGNOSTIC.	1996-12-18 11:35:12 +00:00
wd82371.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
wd82371reg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
wdc_p.c	Move CMD640 option from kernel Makefile into opt_wd.h	1997-04-28 19:26:18 +00:00

README.de-le

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/