c3f6b2cf9f
- Most of the boards are using U-Boot, u-boot embed a DTB that isn't compiled with -@ (overlay ready) so we cannot use overlays. We want overlays, overlays are nice. - The DTS life is going to linux, then sometimes it's imported in U-Boot but it depend on the SoC family, U-Boot doesn't batch import every DTS like we do. So sometimes to U-Boot DTS are very old. Or when an interesting patch in commited upstream it is in Linux X+2 (roughly 4 months from now), we then have to wait for U-Boot to catch up, that give us between 4 and 6 months to have an update. - Some boards like the Marvell ones have 3 DTS, the one in the vendor U-Boot made by Marvell themselves, the one in u-boot mainline and the one in Linux. I found that the DTS in the Marvell U-Boot have some problem with FreeBSD (especially the macchiatobin that declare node with the same address but not the same size, that is not something that the rman code can handle, it could be modified, I don't know the code well enough). Also some compatible are used when they shouldn't, for example they declare the gpio being orion-gpio while this binding requires interrupts supports, which the node doesn't have. - The above situation is mostly the same with RockChip SoCs (possibly others, those are the only SoCs I work on that have this problem). Note that importing the DTS doesn't mean that every board will use them, I don't intend to copy the DTB to the GENERIC memstick image for the Overdrive 1000/3000 for example, the ones provided by the firmware works fine. RPI3 will still stay an exception as we use the DTB provided by the rpi-firmware package, so they come from the rpi foundation linux fork.
156 lines
3.7 KiB
Plaintext
156 lines
3.7 KiB
Plaintext
/*
|
|
* Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/*
|
|
* AXP803 Integrated Power Management Chip
|
|
* http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
|
|
*/
|
|
|
|
&axp803 {
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
regulators {
|
|
/* Default work frequency for buck regulators */
|
|
x-powers,dcdc-freq = <3000>;
|
|
|
|
reg_aldo1: aldo1 {
|
|
regulator-name = "aldo1";
|
|
};
|
|
|
|
reg_aldo2: aldo2 {
|
|
regulator-name = "aldo2";
|
|
};
|
|
|
|
reg_aldo3: aldo3 {
|
|
regulator-name = "aldo3";
|
|
};
|
|
|
|
reg_dc1sw: dc1sw {
|
|
regulator-name = "dc1sw";
|
|
};
|
|
|
|
reg_dcdc1: dcdc1 {
|
|
regulator-name = "dcdc1";
|
|
};
|
|
|
|
reg_dcdc2: dcdc2 {
|
|
regulator-name = "dcdc2";
|
|
};
|
|
|
|
reg_dcdc3: dcdc3 {
|
|
regulator-name = "dcdc3";
|
|
};
|
|
|
|
reg_dcdc4: dcdc4 {
|
|
regulator-name = "dcdc4";
|
|
};
|
|
|
|
reg_dcdc5: dcdc5 {
|
|
regulator-name = "dcdc5";
|
|
};
|
|
|
|
reg_dcdc6: dcdc6 {
|
|
regulator-name = "dcdc6";
|
|
};
|
|
|
|
reg_dldo1: dldo1 {
|
|
regulator-name = "dldo1";
|
|
};
|
|
|
|
reg_dldo2: dldo2 {
|
|
regulator-name = "dldo2";
|
|
};
|
|
|
|
reg_dldo3: dldo3 {
|
|
regulator-name = "dldo3";
|
|
};
|
|
|
|
reg_dldo4: dldo4 {
|
|
regulator-name = "dldo4";
|
|
};
|
|
|
|
reg_eldo1: eldo1 {
|
|
regulator-name = "eldo1";
|
|
};
|
|
|
|
reg_eldo2: eldo2 {
|
|
regulator-name = "eldo2";
|
|
};
|
|
|
|
reg_eldo3: eldo3 {
|
|
regulator-name = "eldo3";
|
|
};
|
|
|
|
reg_fldo1: fldo1 {
|
|
regulator-name = "fldo1";
|
|
};
|
|
|
|
reg_fldo2: fldo2 {
|
|
regulator-name = "fldo2";
|
|
};
|
|
|
|
reg_ldo_io0: ldo-io0 {
|
|
regulator-name = "ldo-io0";
|
|
status = "disabled";
|
|
};
|
|
|
|
reg_ldo_io1: ldo-io1 {
|
|
regulator-name = "ldo-io1";
|
|
status = "disabled";
|
|
};
|
|
|
|
reg_rtc_ldo: rtc-ldo {
|
|
/* RTC_LDO is a fixed, always-on regulator */
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "rtc-ldo";
|
|
};
|
|
|
|
reg_drivevbus: drivevbus {
|
|
regulator-name = "drivevbus";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|