d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ab16a5bd08
freebsd-nq/sys/dev/usb/usb.h
Hans Petter Selasky a5cf1aaaff Add support for the so-called streams feature of BULK endpoints 
in SUPER-speed mode, USB 3.0.

This feature has not been tested yet, due to lack of hardware.

This feature is useful when implementing protocols like UASP,
USB attached SCSI which promises higher USB mass storage throughput.

This patch also implements support for hardware processing of endpoints
for increased performance. The switching to hardware processing
of an endpoint is done via a callback to the USB controller driver. The
stream feature is implemented like a variant of a hardware USB protocol.

USB controller drivers implementing device mode needs to be updated to
implement the new "xfer_stall" USB controller method and remove the
"xfer" argument from the "set_stall" method.

The API's toward existing USB drivers are preserved. To setup a USB transfer
in stream mode, set the "stream_id" field of the USB config structure to
the desired value.

The maximum number of BULK streams is currently hardcoded and limited to 8
via a define in usb_freebsd.h.

All USB drivers should be re-compiled after this change.

LibUSB will be updated next week to support streams mode. A new IOCTL to
setup BULK streams as already been implemented. The ugen device nodes
currently only supports stream ID zero.

The FreeBSD version has been bumped.

MFC after:	2 weeks
2012-08-12 17:53:06 +00:00

784 lines
23 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
* Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
* Copyright (c) 1998 Lennart Augustsson. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This file contains standard definitions for the following USB
* protocol versions:
*
* USB v1.0
* USB v1.1
* USB v2.0
* USB v3.0
*/
#ifndef _USB_STANDARD_H_
#define _USB_STANDARD_H_
#if defined(_KERNEL)
#include "opt_usb.h"
/* Declare parent SYSCTL USB node. */
#ifdef SYSCTL_DECL
SYSCTL_DECL(_hw_usb);
#endif
#include <sys/malloc.h>
MALLOC_DECLARE(M_USB);
MALLOC_DECLARE(M_USBDEV);
MALLOC_DECLARE(M_USBHC);
#endif /* _KERNEL */
#include <dev/usb/usb_endian.h>
#include <dev/usb/usb_freebsd.h>
#define USB_STACK_VERSION 2000 /* 2.0 */
/* Definition of some hardcoded USB constants. */
#define USB_MAX_IPACKET 8 /* initial USB packet size */
#define USB_EP_MAX (2*16) /* hardcoded */
#define USB_ROOT_HUB_ADDR 1 /* index */
#define USB_MIN_DEVICES 2 /* unused + root HUB */
#define USB_UNCONFIG_INDEX 0xFF /* internal use only */
#define USB_IFACE_INDEX_ANY 0xFF /* internal use only */
#define USB_START_ADDR 0 /* default USB device BUS address
* after USB bus reset */
#define USB_CONTROL_ENDPOINT 0 /* default control endpoint */
#define USB_FRAMES_PER_SECOND_FS 1000 /* full speed */
#define USB_FRAMES_PER_SECOND_HS 8000 /* high speed */
#define USB_FS_BYTES_PER_HS_UFRAME 188 /* bytes */
#define USB_HS_MICRO_FRAMES_MAX 8 /* units */
#define USB_ISOC_TIME_MAX 128 /* ms */
/*
* Minimum time a device needs to be powered down to go through a
* power cycle. These values are not in the USB specification.
*/
#define USB_POWER_DOWN_TIME 200 /* ms */
#define USB_PORT_POWER_DOWN_TIME 100 /* ms */
/* Definition of software USB power modes */
#define USB_POWER_MODE_OFF 0 /* turn off device */
#define USB_POWER_MODE_ON 1 /* always on */
#define USB_POWER_MODE_SAVE 2 /* automatic suspend and resume */
#define USB_POWER_MODE_SUSPEND 3 /* force suspend */
#define USB_POWER_MODE_RESUME 4 /* force resume */
#if 0
/* These are the values from the USB specification. */
#define USB_PORT_RESET_DELAY 10 /* ms */
#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */
#define USB_PORT_RESET_RECOVERY 10 /* ms */
#define USB_PORT_POWERUP_DELAY 100 /* ms */
#define USB_PORT_RESUME_DELAY 20 /* ms */
#define USB_SET_ADDRESS_SETTLE 2 /* ms */
#define USB_RESUME_DELAY (20*5) /* ms */
#define USB_RESUME_WAIT 10 /* ms */
#define USB_RESUME_RECOVERY 10 /* ms */
#define USB_EXTRA_POWER_UP_TIME 0 /* ms */
#else
/* Allow for marginal and non-conforming devices. */
#define USB_PORT_RESET_DELAY 50 /* ms */
#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */
#define USB_PORT_RESET_RECOVERY 250 /* ms */
#define USB_PORT_POWERUP_DELAY 300 /* ms */
#define USB_PORT_RESUME_DELAY (20*2) /* ms */
#define USB_SET_ADDRESS_SETTLE 10 /* ms */
#define USB_RESUME_DELAY (50*5) /* ms */
#define USB_RESUME_WAIT 50 /* ms */
#define USB_RESUME_RECOVERY 50 /* ms */
#define USB_EXTRA_POWER_UP_TIME 20 /* ms */
#endif
#define USB_MIN_POWER 100 /* mA */
#define USB_MAX_POWER 500 /* mA */
#define USB_BUS_RESET_DELAY 100 /* ms */
/*
* USB record layout in memory:
*
* - USB config 0
* - USB interfaces
* - USB alternative interfaces
* - USB endpoints
*
* - USB config 1
* - USB interfaces
* - USB alternative interfaces
* - USB endpoints
*/
/* Declaration of USB records */
struct usb_device_request {
uByte bmRequestType;
uByte bRequest;
uWord wValue;
uWord wIndex;
uWord wLength;
} __packed;
typedef struct usb_device_request usb_device_request_t;
#define UT_WRITE 0x00
#define UT_READ 0x80
#define UT_STANDARD 0x00
#define UT_CLASS 0x20
#define UT_VENDOR 0x40
#define UT_DEVICE 0x00
#define UT_INTERFACE 0x01
#define UT_ENDPOINT 0x02
#define UT_OTHER 0x03
#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE)
#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE)
#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT)
#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE)
#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE)
#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT)
#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE)
#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE)
#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER)
#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT)
#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE)
#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER)
#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT)
#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE)
#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE)
#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER)
#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT)
#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE)
#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER)
#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
/* Requests */
#define UR_GET_STATUS 0x00
#define UR_CLEAR_FEATURE 0x01
#define UR_SET_FEATURE 0x03
#define UR_SET_ADDRESS 0x05
#define UR_GET_DESCRIPTOR 0x06
#define UDESC_DEVICE 0x01
#define UDESC_CONFIG 0x02
#define UDESC_STRING 0x03
#define USB_LANGUAGE_TABLE 0x00 /* language ID string index */
#define UDESC_INTERFACE 0x04
#define UDESC_ENDPOINT 0x05
#define UDESC_DEVICE_QUALIFIER 0x06
#define UDESC_OTHER_SPEED_CONFIGURATION 0x07
#define UDESC_INTERFACE_POWER 0x08
#define UDESC_OTG 0x09
#define UDESC_DEBUG 0x0A
#define UDESC_IFACE_ASSOC 0x0B /* interface association */
#define UDESC_BOS 0x0F /* binary object store */
#define UDESC_DEVICE_CAPABILITY 0x10
#define UDESC_CS_DEVICE 0x21 /* class specific */
#define UDESC_CS_CONFIG 0x22
#define UDESC_CS_STRING 0x23
#define UDESC_CS_INTERFACE 0x24
#define UDESC_CS_ENDPOINT 0x25
#define UDESC_HUB 0x29
#define UDESC_SS_HUB 0x2A /* super speed */
#define UDESC_ENDPOINT_SS_COMP 0x30 /* super speed */
#define UR_SET_DESCRIPTOR 0x07
#define UR_GET_CONFIG 0x08
#define UR_SET_CONFIG 0x09
#define UR_GET_INTERFACE 0x0a
#define UR_SET_INTERFACE 0x0b
#define UR_SYNCH_FRAME 0x0c
#define UR_SET_SEL 0x30
#define UR_ISOCH_DELAY 0x31
/* HUB specific request */
#define UR_GET_BUS_STATE 0x02
#define UR_CLEAR_TT_BUFFER 0x08
#define UR_RESET_TT 0x09
#define UR_GET_TT_STATE 0x0a
#define UR_STOP_TT 0x0b
#define UR_SET_AND_TEST 0x0c /* USB 2.0 only */
#define UR_SET_HUB_DEPTH 0x0c /* USB 3.0 only */
#define USB_SS_HUB_DEPTH_MAX 5
#define UR_GET_PORT_ERR_COUNT 0x0d
/* Feature numbers */
#define UF_ENDPOINT_HALT 0
#define UF_DEVICE_REMOTE_WAKEUP 1
#define UF_TEST_MODE 2
#define UF_U1_ENABLE 0x30
#define UF_U2_ENABLE 0x31
#define UF_LTM_ENABLE 0x32
/* HUB specific features */
#define UHF_C_HUB_LOCAL_POWER 0
#define UHF_C_HUB_OVER_CURRENT 1
#define UHF_PORT_CONNECTION 0
#define UHF_PORT_ENABLE 1
#define UHF_PORT_SUSPEND 2
#define UHF_PORT_OVER_CURRENT 3
#define UHF_PORT_RESET 4
#define UHF_PORT_LINK_STATE 5
#define UHF_PORT_POWER 8
#define UHF_PORT_LOW_SPEED 9
#define UHF_PORT_L1 10
#define UHF_C_PORT_CONNECTION 16
#define UHF_C_PORT_ENABLE 17
#define UHF_C_PORT_SUSPEND 18
#define UHF_C_PORT_OVER_CURRENT 19
#define UHF_C_PORT_RESET 20
#define UHF_PORT_TEST 21
#define UHF_PORT_INDICATOR 22
#define UHF_C_PORT_L1 23
/* SuperSpeed HUB specific features */
#define UHF_PORT_U1_TIMEOUT 23
#define UHF_PORT_U2_TIMEOUT 24
#define UHF_C_PORT_LINK_STATE 25
#define UHF_C_PORT_CONFIG_ERROR 26
#define UHF_PORT_REMOTE_WAKE_MASK 27
#define UHF_BH_PORT_RESET 28
#define UHF_C_BH_PORT_RESET 29
#define UHF_FORCE_LINKPM_ACCEPT 30
struct usb_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDescriptorSubtype;
} __packed;
typedef struct usb_descriptor usb_descriptor_t;
struct usb_device_descriptor {
uByte bLength;
uByte bDescriptorType;
uWord bcdUSB;
#define UD_USB_2_0 0x0200
#define UD_USB_3_0 0x0300
#define UD_IS_USB2(d) ((d)->bcdUSB[1] == 0x02)
#define UD_IS_USB3(d) ((d)->bcdUSB[1] == 0x03)
uByte bDeviceClass;
uByte bDeviceSubClass;
uByte bDeviceProtocol;
uByte bMaxPacketSize;
/* The fields below are not part of the initial descriptor. */
uWord idVendor;
uWord idProduct;
uWord bcdDevice;
uByte iManufacturer;
uByte iProduct;
uByte iSerialNumber;
uByte bNumConfigurations;
} __packed;
typedef struct usb_device_descriptor usb_device_descriptor_t;
/* Binary Device Object Store (BOS) */
struct usb_bos_descriptor {
uByte bLength;
uByte bDescriptorType;
uWord wTotalLength;
uByte bNumDeviceCaps;
} __packed;
typedef struct usb_bos_descriptor usb_bos_descriptor_t;
/* Binary Device Object Store Capability */
struct usb_bos_cap_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDevCapabilityType;
#define USB_DEVCAP_RESERVED 0x00
#define USB_DEVCAP_WUSB 0x01
#define USB_DEVCAP_USB2EXT 0x02
#define USB_DEVCAP_SUPER_SPEED 0x03
#define USB_DEVCAP_CONTAINER_ID 0x04
/* data ... */
} __packed;
typedef struct usb_bos_cap_descriptor usb_bos_cap_descriptor_t;
struct usb_devcap_usb2ext_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDevCapabilityType;
uDWord bmAttributes;
#define USB_V2EXT_LPM (1U << 1)
#define USB_V2EXT_BESL_SUPPORTED (1U << 2)
#define USB_V2EXT_BESL_BASELINE_VALID (1U << 3)
#define USB_V2EXT_BESL_DEEP_VALID (1U << 4)
#define USB_V2EXT_BESL_BASELINE_GET(x) (((x) >> 8) & 0xF)
#define USB_V2EXT_BESL_DEEP_GET(x) (((x) >> 12) & 0xF)
} __packed;
typedef struct usb_devcap_usb2ext_descriptor usb_devcap_usb2ext_descriptor_t;
struct usb_devcap_ss_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDevCapabilityType;
uByte bmAttributes;
uWord wSpeedsSupported;
uByte bFunctionalitySupport;
uByte bU1DevExitLat;
uWord wU2DevExitLat;
} __packed;
typedef struct usb_devcap_ss_descriptor usb_devcap_ss_descriptor_t;
struct usb_devcap_container_id_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDevCapabilityType;
uByte bReserved;
uByte bContainerID;
} __packed;
typedef struct usb_devcap_container_id_descriptor
usb_devcap_container_id_descriptor_t;
/* Device class codes */
#define UDCLASS_IN_INTERFACE 0x00
#define UDCLASS_COMM 0x02
#define UDCLASS_HUB 0x09
#define UDSUBCLASS_HUB 0x00
#define UDPROTO_FSHUB 0x00
#define UDPROTO_HSHUBSTT 0x01
#define UDPROTO_HSHUBMTT 0x02
#define UDPROTO_SSHUB 0x03
#define UDCLASS_DIAGNOSTIC 0xdc
#define UDCLASS_WIRELESS 0xe0
#define UDSUBCLASS_RF 0x01
#define UDPROTO_BLUETOOTH 0x01
#define UDCLASS_VENDOR 0xff
struct usb_config_descriptor {
uByte bLength;
uByte bDescriptorType;
uWord wTotalLength;
uByte bNumInterface;
uByte bConfigurationValue;
#define USB_UNCONFIG_NO 0
uByte iConfiguration;
uByte bmAttributes;
#define UC_BUS_POWERED 0x80
#define UC_SELF_POWERED 0x40
#define UC_REMOTE_WAKEUP 0x20
uByte bMaxPower; /* max current in 2 mA units */
#define UC_POWER_FACTOR 2
} __packed;
typedef struct usb_config_descriptor usb_config_descriptor_t;
struct usb_interface_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bInterfaceNumber;
uByte bAlternateSetting;
uByte bNumEndpoints;
uByte bInterfaceClass;
uByte bInterfaceSubClass;
uByte bInterfaceProtocol;
uByte iInterface;
} __packed;
typedef struct usb_interface_descriptor usb_interface_descriptor_t;
struct usb_interface_assoc_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bFirstInterface;
uByte bInterfaceCount;
uByte bFunctionClass;
uByte bFunctionSubClass;
uByte bFunctionProtocol;
uByte iFunction;
} __packed;
typedef struct usb_interface_assoc_descriptor usb_interface_assoc_descriptor_t;
/* Interface class codes */
#define UICLASS_UNSPEC 0x00
#define UICLASS_AUDIO 0x01 /* audio */
#define UISUBCLASS_AUDIOCONTROL 1
#define UISUBCLASS_AUDIOSTREAM 2
#define UISUBCLASS_MIDISTREAM 3
#define UICLASS_CDC 0x02 /* communication */
#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1
#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2
#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3
#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4
#define UISUBCLASS_CAPI_CONTROLMODEL 5
#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
#define UISUBCLASS_WIRELESS_HANDSET_CM 8
#define UISUBCLASS_DEVICE_MGMT 9
#define UISUBCLASS_MOBILE_DIRECT_LINE_MODEL 10
#define UISUBCLASS_OBEX 11
#define UISUBCLASS_ETHERNET_EMULATION_MODEL 12
#define UISUBCLASS_NETWORK_CONTROL_MODEL 13
#define UIPROTO_CDC_AT 1
#define UICLASS_HID 0x03
#define UISUBCLASS_BOOT 1
#define UIPROTO_BOOT_KEYBOARD 1
#define UIPROTO_MOUSE 2
#define UICLASS_PHYSICAL 0x05
#define UICLASS_IMAGE 0x06
#define UISUBCLASS_SIC 1 /* still image class */
#define UICLASS_PRINTER 0x07
#define UISUBCLASS_PRINTER 1
#define UIPROTO_PRINTER_UNI 1
#define UIPROTO_PRINTER_BI 2
#define UIPROTO_PRINTER_1284 3
#define UICLASS_MASS 0x08
#define UISUBCLASS_RBC 1
#define UISUBCLASS_SFF8020I 2
#define UISUBCLASS_QIC157 3
#define UISUBCLASS_UFI 4
#define UISUBCLASS_SFF8070I 5
#define UISUBCLASS_SCSI 6
#define UIPROTO_MASS_CBI_I 0
#define UIPROTO_MASS_CBI 1
#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */
#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */
#define UICLASS_HUB 0x09
#define UISUBCLASS_HUB 0
#define UIPROTO_FSHUB 0
#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */
#define UIPROTO_HSHUBMTT 1
#define UICLASS_CDC_DATA 0x0a
#define UISUBCLASS_DATA 0x00
#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */
#define UIPROTO_DATA_HDLC 0x31 /* HDLC */
#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */
#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */
#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */
#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */
#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */
#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */
#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */
#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */
#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */
#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc. */
#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */
#define UIPROTO_DATA_NCM 0x01 /* Network Control Model */
#define UICLASS_SMARTCARD 0x0b
#define UICLASS_FIRM_UPD 0x0c
#define UICLASS_SECURITY 0x0d
#define UICLASS_DIAGNOSTIC 0xdc
#define UICLASS_WIRELESS 0xe0
#define UISUBCLASS_RF 0x01
#define UIPROTO_BLUETOOTH 0x01
#define UICLASS_IAD 0xEF /* Interface Association Descriptor */
#define UICLASS_APPL_SPEC 0xfe
#define UISUBCLASS_FIRMWARE_DOWNLOAD 1
#define UISUBCLASS_IRDA 2
#define UIPROTO_IRDA 0
#define UICLASS_VENDOR 0xff
#define UISUBCLASS_XBOX360_CONTROLLER 0x5d
#define UIPROTO_XBOX360_GAMEPAD 0x01
struct usb_endpoint_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bEndpointAddress;
#define UE_GET_DIR(a) ((a) & 0x80)
#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7))
#define UE_DIR_IN 0x80 /* IN-token endpoint, fixed */
#define UE_DIR_OUT 0x00 /* OUT-token endpoint, fixed */
#define UE_DIR_RX 0xfd /* for internal use only! */
#define UE_DIR_TX 0xfe /* for internal use only! */
#define UE_DIR_ANY 0xff /* for internal use only! */
#define UE_ADDR 0x0f
#define UE_ADDR_ANY 0xff /* for internal use only! */
#define UE_GET_ADDR(a) ((a) & UE_ADDR)
uByte bmAttributes;
#define UE_XFERTYPE 0x03
#define UE_CONTROL 0x00
#define UE_ISOCHRONOUS 0x01
#define UE_BULK 0x02
#define UE_INTERRUPT 0x03
#define UE_BULK_INTR 0xfe /* for internal use only! */
#define UE_TYPE_ANY 0xff /* for internal use only! */
#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE)
#define UE_ISO_TYPE 0x0c
#define UE_ISO_ASYNC 0x04
#define UE_ISO_ADAPT 0x08
#define UE_ISO_SYNC 0x0c
#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE)
uWord wMaxPacketSize;
#define UE_ZERO_MPS 0xFFFF /* for internal use only */
uByte bInterval;
} __packed;
typedef struct usb_endpoint_descriptor usb_endpoint_descriptor_t;
struct usb_endpoint_ss_comp_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bMaxBurst;
uByte bmAttributes;
#define UE_GET_BULK_STREAMS(x) ((x) & 0x0F)
#define UE_GET_SS_ISO_MULT(x) ((x) & 0x03)
uWord wBytesPerInterval;
} __packed;
typedef struct usb_endpoint_ss_comp_descriptor
usb_endpoint_ss_comp_descriptor_t;
struct usb_string_descriptor {
uByte bLength;
uByte bDescriptorType;
uWord bString[126];
uByte bUnused;
} __packed;
typedef struct usb_string_descriptor usb_string_descriptor_t;
#define USB_MAKE_STRING_DESC(m,name) \
struct name { \
uByte bLength; \
uByte bDescriptorType; \
uByte bData[sizeof((uint8_t []){m})]; \
} __packed; \
static const struct name name = { \
.bLength = sizeof(struct name), \
.bDescriptorType = UDESC_STRING, \
.bData = { m }, \
}
struct usb_hub_descriptor {
uByte bDescLength;
uByte bDescriptorType;
uByte bNbrPorts;
uWord wHubCharacteristics;
#define UHD_PWR 0x0003
#define UHD_PWR_GANGED 0x0000
#define UHD_PWR_INDIVIDUAL 0x0001
#define UHD_PWR_NO_SWITCH 0x0002
#define UHD_COMPOUND 0x0004
#define UHD_OC 0x0018
#define UHD_OC_GLOBAL 0x0000
#define UHD_OC_INDIVIDUAL 0x0008
#define UHD_OC_NONE 0x0010
#define UHD_TT_THINK 0x0060
#define UHD_TT_THINK_8 0x0000
#define UHD_TT_THINK_16 0x0020
#define UHD_TT_THINK_24 0x0040
#define UHD_TT_THINK_32 0x0060
#define UHD_PORT_IND 0x0080
uByte bPwrOn2PwrGood; /* delay in 2 ms units */
#define UHD_PWRON_FACTOR 2
uByte bHubContrCurrent;
uByte DeviceRemovable[32]; /* max 255 ports */
#define UHD_NOT_REMOV(desc, i) \
(((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
uByte PortPowerCtrlMask[1]; /* deprecated */
} __packed;
typedef struct usb_hub_descriptor usb_hub_descriptor_t;
struct usb_hub_ss_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bNbrPorts;
uWord wHubCharacteristics;
uByte bPwrOn2PwrGood; /* delay in 2 ms units */
uByte bHubContrCurrent;
uByte bHubHdrDecLat;
uWord wHubDelay;
uByte DeviceRemovable[32]; /* max 255 ports */
} __packed;
typedef struct usb_hub_ss_descriptor usb_hub_ss_descriptor_t;
/* minimum HUB descriptor (8-ports maximum) */
struct usb_hub_descriptor_min {
uByte bDescLength;
uByte bDescriptorType;
uByte bNbrPorts;
uWord wHubCharacteristics;
uByte bPwrOn2PwrGood;
uByte bHubContrCurrent;
uByte DeviceRemovable[1];
uByte PortPowerCtrlMask[1];
} __packed;
typedef struct usb_hub_descriptor_min usb_hub_descriptor_min_t;
struct usb_device_qualifier {
uByte bLength;
uByte bDescriptorType;
uWord bcdUSB;
uByte bDeviceClass;
uByte bDeviceSubClass;
uByte bDeviceProtocol;
uByte bMaxPacketSize0;
uByte bNumConfigurations;
uByte bReserved;
} __packed;
typedef struct usb_device_qualifier usb_device_qualifier_t;
struct usb_otg_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bmAttributes;
#define UOTG_SRP 0x01
#define UOTG_HNP 0x02
} __packed;
typedef struct usb_otg_descriptor usb_otg_descriptor_t;
/* OTG feature selectors */
#define UOTG_B_HNP_ENABLE 3
#define UOTG_A_HNP_SUPPORT 4
#define UOTG_A_ALT_HNP_SUPPORT 5
struct usb_status {
uWord wStatus;
/* Device status flags */
#define UDS_SELF_POWERED 0x0001
#define UDS_REMOTE_WAKEUP 0x0002
/* Endpoint status flags */
#define UES_HALT 0x0001
} __packed;
typedef struct usb_status usb_status_t;
struct usb_hub_status {
uWord wHubStatus;
#define UHS_LOCAL_POWER 0x0001
#define UHS_OVER_CURRENT 0x0002
uWord wHubChange;
} __packed;
typedef struct usb_hub_status usb_hub_status_t;
struct usb_port_status {
uWord wPortStatus;
#define UPS_CURRENT_CONNECT_STATUS 0x0001
#define UPS_PORT_ENABLED 0x0002
#define UPS_SUSPEND 0x0004
#define UPS_OVERCURRENT_INDICATOR 0x0008
#define UPS_RESET 0x0010
#define UPS_PORT_L1 0x0020 /* USB 2.0 only */
/* The link-state bits are valid for Super-Speed USB HUBs */
#define UPS_PORT_LINK_STATE_GET(x) (((x) >> 5) & 0xF)
#define UPS_PORT_LINK_STATE_SET(x) (((x) & 0xF) << 5)
#define UPS_PORT_LS_U0 0x00
#define UPS_PORT_LS_U1 0x01
#define UPS_PORT_LS_U2 0x02
#define UPS_PORT_LS_U3 0x03
#define UPS_PORT_LS_SS_DIS 0x04
#define UPS_PORT_LS_RX_DET 0x05
#define UPS_PORT_LS_SS_INA 0x06
#define UPS_PORT_LS_POLL 0x07
#define UPS_PORT_LS_RECOVER 0x08
#define UPS_PORT_LS_HOT_RST 0x09
#define UPS_PORT_LS_COMP_MODE 0x0A
#define UPS_PORT_LS_LOOPBACK 0x0B
#define UPS_PORT_LS_RESUME 0x0F
#define UPS_PORT_POWER 0x0100
#define UPS_PORT_POWER_SS 0x0200 /* super-speed only */
#define UPS_LOW_SPEED 0x0200
#define UPS_HIGH_SPEED 0x0400
#define UPS_OTHER_SPEED 0x0600 /* currently FreeBSD specific */
#define UPS_PORT_TEST 0x0800
#define UPS_PORT_INDICATOR 0x1000
#define UPS_PORT_MODE_DEVICE 0x8000 /* currently FreeBSD specific */
uWord wPortChange;
#define UPS_C_CONNECT_STATUS 0x0001
#define UPS_C_PORT_ENABLED 0x0002
#define UPS_C_SUSPEND 0x0004
#define UPS_C_OVERCURRENT_INDICATOR 0x0008
#define UPS_C_PORT_RESET 0x0010
#define UPS_C_PORT_L1 0x0020 /* USB 2.0 only */
#define UPS_C_BH_PORT_RESET 0x0020 /* USB 3.0 only */
#define UPS_C_PORT_LINK_STATE 0x0040
#define UPS_C_PORT_CONFIG_ERROR 0x0080
} __packed;
typedef struct usb_port_status usb_port_status_t;
/*
* The "USB_SPEED" macros defines all the supported USB speeds.
*/
enum usb_dev_speed {
USB_SPEED_VARIABLE,
USB_SPEED_LOW,
USB_SPEED_FULL,
USB_SPEED_HIGH,
USB_SPEED_SUPER,
};
#define USB_SPEED_MAX (USB_SPEED_SUPER+1)
/*
* The "USB_REV" macros defines all the supported USB revisions.
*/
enum usb_revision {
USB_REV_UNKNOWN,
USB_REV_PRE_1_0,
USB_REV_1_0,
USB_REV_1_1,
USB_REV_2_0,
USB_REV_2_5,
USB_REV_3_0
};
#define USB_REV_MAX (USB_REV_3_0+1)
/*
* Supported host controller modes.
*/
enum usb_hc_mode {
USB_MODE_HOST, /* initiates transfers */
USB_MODE_DEVICE, /* bus transfer target */
USB_MODE_DUAL /* can be host or device */
};
#define USB_MODE_MAX (USB_MODE_DUAL+1)
/*
* The "USB_STATE" enums define all the supported device states.
*/
enum usb_dev_state {
USB_STATE_DETACHED,
USB_STATE_ATTACHED,
USB_STATE_POWERED,
USB_STATE_ADDRESSED,
USB_STATE_CONFIGURED,
};
#define USB_STATE_MAX (USB_STATE_CONFIGURED+1)
/*
* The "USB_EP_MODE" macros define all the currently supported
* endpoint modes.
*/
enum usb_ep_mode {
USB_EP_MODE_DEFAULT,
USB_EP_MODE_STREAMS, /* USB3.0 specific */
USB_EP_MODE_HW_MASS_STORAGE,
USB_EP_MODE_HW_SERIAL,
USB_EP_MODE_HW_ETHERNET_CDC,
USB_EP_MODE_HW_ETHERNET_NCM,
USB_EP_MODE_MAX
};
#endif /* _USB_STANDARD_H_ */
Reference in New Issue View Git Blame Copy Permalink