d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-nq/sys/mips/conf
History
Adrian Chadd f5937ee8e6 Add some initial board support for the AR934x and the Qualcomm Atheros 
DB120 development board.

The AR934x SoCs are a MIPS74k based system with increased RAM addressing
space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3
on-board dual-band wifi.

This support isn't complete by any stretch; it's just enough to bring
the board up for others to tinker with.  Notably, the MIPS74k support
is broken.  However it boots enough to echo some basic probe/attach
messages, before dying somewhere in the TLB code.

Thankyou to Qualcomm Atheros for their continued support of me doing
open source work with their hardware.

Tested:

* AR9344, mips74k
2013-07-21 04:00:48 +00:00
..
ADM5120
…
ADM5120.hints
…
ALCHEMY
…
AP91
Bring over a configuration for the Atheros AP91 reference board.
2012-08-29 01:08:36 +00:00
AP91.hints
Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards.
2012-11-07 22:46:30 +00:00
AP93
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
AP93.hints
Add the missing link back to the EEPROM firmware name.
2013-07-04 08:09:54 +00:00
AP94
* Enable ATH_EEPROM_FIRMWARE, now that it's a compile time option
2012-04-13 18:01:53 +00:00
AP94.hints
Introduce configuration files for AP94 and AP96.
2012-04-13 08:52:25 +00:00
AP96
Convert to using ulzma.
2012-08-27 21:49:37 +00:00
AP96.hints
Update AP96 to directly attach an arswitch.
2012-11-07 23:50:28 +00:00
AP121
Add AP121 ethernet / switch PHY support.
2013-04-05 01:38:13 +00:00
AP121.hints
Add the basic GPIO pin mapping to the hints file.
2013-04-05 02:15:10 +00:00
AR71XX_BASE
Migrate the AR71xx UART (an 8250 derivative) to hide behind uart_ar71xx.
2012-11-17 04:05:46 +00:00
AR71XX_BASE.hints
Break out the AR71XX config file into _BASE and board specific
2011-12-29 05:51:48 +00:00
AR91XX_BASE
Ensure hwpmc support is correctly included.
2012-11-17 04:11:57 +00:00
AR91XX_BASE.hints
…
AR724X_BASE
Migrate the AR71xx UART (an 8250 derivative) to hide behind uart_ar71xx.
2012-11-17 04:05:46 +00:00
AR724X_BASE.hints
Create a skeleton AR724x SoC board configuration for use by AR724x devices.
2012-08-26 04:36:59 +00:00
AR933X_BASE
Add the wireless support to the AR933x base kernel, as the support
2013-06-26 05:02:30 +00:00
AR933X_BASE.hints
Add in the vendor / device id so the ath_ahb glue works.
2013-06-26 05:02:47 +00:00
AR934X_BASE
Add some initial board support for the AR934x and the Qualcomm Atheros
2013-07-21 04:00:48 +00:00
AR934X_BASE.hints
Add some initial board support for the AR934x and the Qualcomm Atheros
2013-07-21 04:00:48 +00:00
BERI_DE4_MDROOT
Don't hardcode paths to MFS_IMAGE in the kernel config. When they don't
2012-09-05 15:55:51 +00:00
BERI_DE4_SDROOT
Add terasic_de4led, a led(4) driver for the on-board 8-element LED on the
2012-08-26 09:21:59 +00:00
BERI_DE4.hints
Expose DE4 buttons and switches via a de4bsw device, implemented using
2012-08-26 10:40:13 +00:00
BERI_SIM_MDROOT
Don't hardcode paths to MFS_IMAGE in the kernel config. When they don't
2012-09-05 15:55:51 +00:00
BERI_SIM.hints
Add reference kernel configurations for FreeBSD/beri in simulation, on the
2012-08-25 12:02:13 +00:00
BERI_TEMPLATE
Add reference kernel configurations for FreeBSD/beri in simulation, on the
2012-08-25 12:02:13 +00:00
BERI_TPAD.hints
Add reference kernel configurations for FreeBSD/beri in simulation, on the
2012-08-25 12:02:13 +00:00
CARAMBOLA2
Add 8devices CARAMBOLA2 support.
2013-06-08 20:21:17 +00:00
CARAMBOLA2.hints
Add the EEPROM start offset and size in so ath_ahb will use the
2013-06-26 05:03:47 +00:00
DB120
Add some initial board support for the AR934x and the Qualcomm Atheros
2013-07-21 04:00:48 +00:00
DB120.hints
Add some initial board support for the AR934x and the Qualcomm Atheros
2013-07-21 04:00:48 +00:00
DEFAULTS
Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported
2012-03-06 20:01:25 +00:00
DIR-825
This is an initial board configuration for the D-Link DIR-825 dual-band
2012-08-28 06:17:44 +00:00
DIR-825.hints
The DIR-825 cal data is in an odd spot. I don't know why it's here.
2012-08-30 17:35:12 +00:00
ENH200
Add in a configuration file and hints for the Engenius ENH-200.
2013-07-04 08:13:14 +00:00
ENH200.hints
Oops - fix bad hint numbering for the ART section.
2013-07-04 08:42:20 +00:00
GXEMUL
Add basic SMP support for GXemul. Ideally we would have some way to override
2012-05-07 04:36:48 +00:00
GXEMUL.hints
Merge a rudimentary gxemul "oldtestmips" port. This consists almost
2012-05-02 08:10:15 +00:00
IDT
…
IDT.hints
…
MALTA
o) Use ABI, not ISA_* options, to determine whether to compile bits if libkern
2012-03-12 21:25:32 +00:00
MALTA64
o) Use ABI, not ISA_* options, to determine whether to compile bits if libkern
2012-03-12 21:25:32 +00:00
MALTA.hints
…
OCTEON1
Add commented out OCTEON_VENDOR_GEFES
2013-05-10 03:05:44 +00:00
OCTEON1.hints
…
PB47
Remove duplicated GEOM_PART_* options.
2012-08-23 22:23:56 +00:00
PB47.hints
Add a configuration file for the Atheros PB47 reference board.
2011-12-30 09:48:35 +00:00
PB92
Migrate the AR71xx UART (an 8250 derivative) to hide behind uart_ar71xx.
2012-11-17 04:05:46 +00:00
PB92.hints
…
QEMU
…
ROUTERSTATION
Modify the routerstation config to use ukswitch for now.
2013-05-08 20:57:37 +00:00
ROUTERSTATION_MFS
Break out the AR71XX config file into _BASE and board specific
2011-12-29 05:51:48 +00:00
ROUTERSTATION.hints
Add some missing arge MDIO hints.
2013-05-09 19:37:00 +00:00
RSPRO
Remove duplicated GEOM_PART_* options.
2012-08-23 22:23:56 +00:00
RSPRO_MFS
Break out the AR71XX config file into _BASE and board specific
2011-12-29 05:51:48 +00:00
RSPRO_STANDALONE
Remove duplicated GEOM_PART_* options.
2012-08-23 22:23:56 +00:00
RSPRO.hints
Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards.
2012-11-07 22:46:30 +00:00
RT305X
Remove ZERO_COPY_SOCKETS from kernel configuration as the current
2012-10-22 15:04:23 +00:00
RT305X.hints
…
SENTRY5
…
SENTRY5.hints
…
std.SWARM
Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
2013-04-04 07:12:24 +00:00
std.XLP
Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
2013-04-04 07:12:24 +00:00
SWARM
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
2012-03-29 02:54:35 +00:00
SWARM64
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
2012-03-29 02:54:35 +00:00
SWARM64_SMP
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
2012-03-29 02:54:35 +00:00
SWARM_SMP
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
2012-03-29 02:54:35 +00:00
SWARM.hints
…
TP-WN1043ND
Remove duplicated GEOM_PART_* options.
2012-08-23 22:23:56 +00:00
TP-WN1043ND.hints
Flip on WN1043ND switch PHY support.
2012-05-12 17:41:42 +00:00
XLP
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
2012-03-29 02:54:35 +00:00
XLP64
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
2012-03-29 02:54:35 +00:00
XLP.hints
I2C support for XLP, add hints for I2C devices and update PCI resource
2012-03-27 11:17:04 +00:00
XLPN32
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
2012-03-29 02:54:35 +00:00
XLR
Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
2013-04-04 07:12:24 +00:00
XLR64
Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
2013-04-04 07:12:24 +00:00
XLRN32
Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
2013-04-04 07:12:24 +00:00