freebsd-nq/contrib/bsnmp/snmp_mibII/BEGEMOT-MIB2-MIB.txt
Shteryana Shopova bd96183d5e Fix a problem with high CPU consumption (up to 30%) by bsnmpd on a loaded system.
Instead of constantly calling the mibII_idle function when the server is not busy
call the function only once every 10 seconds to avoid bsnmpd constantly doing
gettimeofday syscalls. Make the idle polling interval confugurable via
begemotIfDataPoll.

Reported and tested by: misho (at) aitbg (dot) com
Oked by: harti
MFC after:	1 week
2009-12-03 16:08:00 +00:00

107 lines
3.4 KiB
Plaintext

--
-- Copyright (c) 2006
-- Hartmut Brandt
-- All rights reserved.
--
-- Author: Harti Brandt <harti@freebsd.org>
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- $Begemot: bsnmp/snmp_mibII/BEGEMOT-MIB2-MIB.txt,v 1.1 2006/02/14 09:04:18 brandt_h Exp $
--
-- Private MIB for MIB2.
--
BEGEMOT-MIB2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Counter64
FROM SNMPv2-SMI
begemotIp
FROM BEGEMOT-IP-MIB;
begemotMib2 MODULE-IDENTITY
LAST-UPDATED "200908030000Z"
ORGANIZATION "German Aerospace Center"
CONTACT-INFO
" Hartmut Brandt
Postal: German Aerospace Center
Oberpfaffenhofen
82234 Wessling
Germany
Fax: +49 8153 28 2843
E-mail: harti@freebsd.org"
DESCRIPTION
"The MIB for private mib2 stuff."
REVISION "200908030000Z"
DESCRIPTION
"Second edition adds begemotIfDataPoll object."
REVISION "200602130000Z"
DESCRIPTION
"Initial revision."
::= { begemotIp 1 }
begemotIfMaxspeed OBJECT-TYPE
SYNTAX Counter64
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed of the fastest interface in ifTable in bps."
::= { begemotMib2 1 }
begemotIfPoll OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current polling rate for the HC 64-bit counters."
::= { begemotMib2 2 }
begemotIfForcePoll OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The polling rate to be enforced for the HC 64-bit counters.
If this value is 0 the mib2 module computes a polling rate
depending on the value of begemotIfMaxspeed. If this value
turns out to be wrong, the polling rate can be force to an
arbitrary value by setting begemotIfForcePoll to a non-0
value. This may be necessary if an interface announces a wrong
bit rate in its MIB."
::= { begemotMib2 3 }
begemotIfDataPoll OBJECT-TYPE
SYNTAX TimeTicks
UNITS "deciseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate at which the mib2 module will poll interface data."
DEFVAL { 100 }
::= { begemotMib2 4 }
END