freebsd-nq/sys/dev/usb/if_rumvar.h
Sam Leffler b032f27c36 Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00

162 lines
3.8 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 2005, 2006 Damien Bergamini <damien.bergamini@free.fr>
* Copyright (c) 2006 Niall O'Higgins <niallo@openbsd.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define RUM_RX_LIST_COUNT 1
#define RUM_TX_LIST_COUNT 8
struct rum_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
uint8_t wr_flags;
uint8_t wr_rate;
uint16_t wr_chan_freq;
uint16_t wr_chan_flags;
uint8_t wr_antenna;
uint8_t wr_antsignal;
};
#define RT2573_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_ANTENNA) | \
(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL))
struct rum_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
uint8_t wt_flags;
uint8_t wt_rate;
uint16_t wt_chan_freq;
uint16_t wt_chan_flags;
uint8_t wt_antenna;
};
#define RT2573_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_ANTENNA))
struct rum_softc;
struct rum_tx_data {
struct rum_softc *sc;
usbd_xfer_handle xfer;
uint8_t *buf;
struct mbuf *m;
struct ieee80211_node *ni;
};
struct rum_rx_data {
struct rum_softc *sc;
usbd_xfer_handle xfer;
uint8_t *buf;
struct mbuf *m;
};
struct rum_node {
struct ieee80211_node ni;
struct ieee80211_amrr_node amn;
};
#define RUM_NODE(ni) ((struct rum_node *)(ni))
struct rum_vap {
struct ieee80211vap vap;
struct ieee80211_beacon_offsets bo;
struct ieee80211_amrr amrr;
struct callout amrr_ch;
int (*newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
};
#define RUM_VAP(vap) ((struct rum_vap *)(vap))
struct rum_softc {
struct ifnet *sc_ifp;
const struct ieee80211_rate_table *sc_rates;
device_t sc_dev;
usbd_device_handle sc_udev;
usbd_interface_handle sc_iface;
int sc_rx_no;
int sc_tx_no;
uint8_t rf_rev;
uint8_t rffreq;
usbd_xfer_handle amrr_xfer;
usbd_pipe_handle sc_rx_pipeh;
usbd_pipe_handle sc_tx_pipeh;
enum ieee80211_state sc_state;
int sc_arg;
struct usb_task sc_task;
struct usb_task sc_scantask;
int sc_scan_action;
#define RUM_SCAN_START 0
#define RUM_SCAN_END 1
#define RUM_SET_CHANNEL 2
struct rum_rx_data rx_data[RUM_RX_LIST_COUNT];
struct rum_tx_data tx_data[RUM_TX_LIST_COUNT];
int tx_queued;
int tx_cur;
struct mtx sc_mtx;
struct callout watchdog_ch;
int sc_tx_timer;
uint32_t sta[6];
uint32_t rf_regs[4];
uint8_t txpow[44];
struct {
uint8_t val;
uint8_t reg;
} __packed bbp_prom[16];
int hw_radio;
int rx_ant;
int tx_ant;
int nb_ant;
int ext_2ghz_lna;
int ext_5ghz_lna;
int rssi_2ghz_corr;
int rssi_5ghz_corr;
uint8_t bbp17;
struct rum_rx_radiotap_header sc_rxtap;
int sc_rxtap_len;
struct rum_tx_radiotap_header sc_txtap;
int sc_txtap_len;
};
#if 0
#define RUM_LOCK(sc) mtx_lock(&(sc)->sc_mtx)
#define RUM_UNLOCK(sc) mtx_unlock(&(sc)->sc_mtx)
#else
#define RUM_LOCK(sc) do { ((sc) = (sc)); mtx_lock(&Giant); } while (0)
#define RUM_UNLOCK(sc) mtx_unlock(&Giant)
#endif