ae1f3df434
only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments)
156 lines
4.6 KiB
Groff
156 lines
4.6 KiB
Groff
.\"
|
|
.\" Copyright (c) 2015 M. Warner Losh
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. The name of the author may not be used to endorse or promote products
|
|
.\" derived from this software without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd July 20, 2015
|
|
.Dt OW_TEMP 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm ow_temp
|
|
.Nd Dallas Semiconductor 1-Wire Temperature sensor
|
|
.Sh SYNOPSIS
|
|
.Cd device ow_temp
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
module supports many of the 1-Wire temperature sensors.
|
|
.Pp
|
|
The sensor is read periodically and the results returned via a
|
|
.Xr sysctl 3
|
|
as described below.
|
|
.Sh HARDWARE
|
|
These temperature sensors are supported by the
|
|
.Nm
|
|
driver:
|
|
.Bl -tag -width MAX31820 -compact
|
|
.It DS1820
|
|
1-Wire Digital Thermometer
|
|
.It DS18S20
|
|
High-Precision 1-Wire Digital Thermometer
|
|
.It DS18B20
|
|
Programmable Resolution 1-Wire Digital Thermometer
|
|
.It DS1822
|
|
Econo 1-Wire Digital Thermometer
|
|
.It DS1825
|
|
Programmable Resolution 1-Wire Digital Thermometer with 4-bit ID
|
|
.It MAX31820
|
|
1-Wire, Parasite-Power, Ambient Temperature Sensor
|
|
.El
|
|
.Pp
|
|
The driver supports Family codes 0x10, 0x22, 0x28, and 0x3b.
|
|
.Sh SYSCTL
|
|
The
|
|
.Nm
|
|
driver reports data via
|
|
.Xr sysctl 8
|
|
entries in the device's node in the
|
|
.Xr sysctl 8
|
|
tree:
|
|
.Bl -tag -width xxxxxxxxxx
|
|
.It temperature
|
|
The last temperature read, in milli-Kelvin.
|
|
.It badcrc
|
|
The number of CRC errors in reading the temperature form the
|
|
device.
|
|
Some CRC errors are to be expected.
|
|
High rates of CRC errors, however, generally indicate a noisy
|
|
environment, cabling issues, or too many devices on the bus.
|
|
.It badread
|
|
The number of times a non-CRC error was encountered reading the temperature
|
|
from the card.
|
|
This type of error is very rare.
|
|
.It reading_interval
|
|
The time, in ticks, between successive reads of the sensor.
|
|
.It parasite
|
|
This item is non-zero when the device is connected using its parasitic
|
|
power mode.
|
|
It can also indicate a wiring error.
|
|
.El
|
|
.Pp
|
|
Temperatures are reported in milli-Kelvin, even though the absolute
|
|
accuracy is around 0.2 degrees for the good devices and around 1
|
|
degree for cheaper devices.
|
|
The devices report in steps of 0.0625 degrees.
|
|
The driver preserves the precision of the device's measurements
|
|
in its
|
|
.Xr sysctl 8
|
|
reports.
|
|
These devices often have a much higher relative accuracy and
|
|
repeatability than their absolute accuracy.
|
|
This makes them well suited for control loops that strive for
|
|
stability and become possible if the full precision is preserved.
|
|
.Sh SEE ALSO
|
|
.Xr ow 4 ,
|
|
.Xr owc 4 ,
|
|
.Xr sysctl 8 ,
|
|
.Xr owll 9 ,
|
|
.Xr own 9
|
|
.Sh LEGAL
|
|
.Tn 1-Wire
|
|
is a registered trademark of Maxim Integrated Products, Inc.
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
driver first appeared in
|
|
.Fx 11.0 .
|
|
.Sh AUTHORS
|
|
The
|
|
.Nm
|
|
device driver and this manual page were written by
|
|
.An Warner Losh .
|
|
.Sh BUGS
|
|
The parasitic mode of the devices does not work.
|
|
It requires support from the
|
|
.Xr owc 4
|
|
driver that is unimplemented.
|
|
.Pp
|
|
The ID bits from the
|
|
.Em DS1825
|
|
are not recognized or reported.
|
|
.Pp
|
|
The type of the device is not reported via
|
|
.Xr sysctl 8 .
|
|
.Pp
|
|
Alarm mode is not supported.
|
|
It is not possible to set the low and high alarm temperatures.
|
|
.Pp
|
|
There is no way to write to the EEPROM.
|
|
.Pp
|
|
.Dq Convert Temperature
|
|
requests are sent directly to the device.
|
|
There is no way to use the broadcast ability of the 1-Wire bus to do
|
|
all the conversions in parallel.
|
|
.Pp
|
|
It is not possible to set the precision on those devices that support
|
|
it.
|
|
.Pp
|
|
The time to convert is fixed at 1 second, even though some devices are
|
|
faster.
|
|
.Pp
|
|
There is no character device to supply a stream of readings to a
|
|
program.
|
|
Programs interested in the temperature must poll the sysctl to get the
|
|
temperature.
|