Kenneth D. Merry aeb681d798 Add unmapped I/O and larger I/O support to the sa(4) driver. ...

We now pay attention to the maxio field in the XPT_PATH_INQ CCB,
and if it is set, propagate it up to physio via the si_iosize_max
field in the cdev structure.

We also now pay attention to the PIM_UNMAPPED capability bit in the
XPT_PATH_INQ CCB, and set the new SI_UNMAPPED cdev flag when the
underlying SIM supports unmapped I/O.

scsi_sa.c:	Add unmapped I/O support and propagate the SIM's
		maximum I/O size up.

		Adjust scsi_tape_read_write() in the same way that
		scsi_read_write() was changed to support unmapped
		I/O.  We overload the readop parameter with bits
		that tell us whether it's an unmapped I/O, and we
		need to set the CAM_DATA_BIO CCB flag.  This change
		should be backwards compatible in source and
		binary forms.

MFC after:	1 week
Sponsored by:	Spectra Logic

2013-08-16 16:14:32 +00:00

..

scsi_all.c

When printing opcode description, map T_NODEVICE to Direct Access Device to

2013-07-13 15:34:37 +00:00

scsi_all.h

Improve handling of 0x3F/0x0E "Reported LUNs data has changed" and 0x25/0x00

2013-07-13 13:35:09 +00:00

scsi_cd.c

Added output of device QUIRKS for CAM and AHCI devices during boot.

2013-05-18 23:36:21 +00:00

scsi_cd.h

…

scsi_ch.c

Fix an argument reversal in calls to scsi_read_element_status().

2013-07-15 16:38:48 +00:00

scsi_ch.h

Update chio(1) and ch(4) to support reporting element designators.

2013-04-19 20:03:51 +00:00

scsi_da.c

Added 4K quirks for:-

2013-08-14 15:18:28 +00:00

scsi_da.h

Change 'camcontrol defects' to first probe a drive to find out how much

2012-06-22 18:57:06 +00:00

scsi_dvcfg.h

…

scsi_enc_internal.h

Fix a device departure bug for the the pass(4), enc(4), sg(4) and ch(4)

2012-12-08 04:03:04 +00:00

scsi_enc_safte.c

1. Remove SEN support. I doubt there are any working examples

2012-08-12 17:01:07 +00:00

scsi_enc_ses.c

Make CAM return and GEOM DISK pass through new GEOM::lunid attribute.

2013-06-12 13:36:20 +00:00

scsi_enc.c

Fix a device departure bug for the the pass(4), enc(4), sg(4) and ch(4)

2012-12-08 04:03:04 +00:00

scsi_enc.h

MFprojects/zfsd:

2012-05-24 14:07:44 +00:00

scsi_iu.h

…

scsi_low.c

Remove some more NetBSD compat shims and other unused bits from these

2012-09-10 18:49:49 +00:00

scsi_low.h

Remove some more NetBSD compat shims and other unused bits from these

2012-09-10 18:49:49 +00:00

scsi_message.h

…

scsi_pass.c

Add infrastructure for doing compatibility shims, as has been sorely

2013-06-17 08:57:09 +00:00

scsi_pass.h

…

scsi_pt.c

Fxi a bunch of typos.

2013-05-10 16:41:26 +00:00

scsi_pt.h

…

scsi_sa.c

Add unmapped I/O and larger I/O support to the sa(4) driver.

2013-08-16 16:14:32 +00:00

scsi_sa.h

…

scsi_ses.h

Fix off by one error in ses_enc_desc_last_byte().

2012-07-24 13:32:49 +00:00

scsi_sg.c

Simplify the checking of flags for cam_periph_mapmem(). This gets rid of

2013-06-07 00:22:38 +00:00

scsi_sg.h

…

scsi_targ_bh.c

Add the CAM Target Layer (CTL).

2012-01-12 00:34:33 +00:00

scsi_target.c

Simplify the checking of flags for cam_periph_mapmem(). This gets rid of

2013-06-07 00:22:38 +00:00

scsi_targetio.h

…

scsi_xpt.c

Make some improvements to r253322 to really rescan target, not a bus.

2013-07-15 18:17:31 +00:00

smp_all.c

Add Serial Management Protocol (SMP) passthrough support to CAM.

2010-11-30 22:39:46 +00:00

smp_all.h

Add Serial Management Protocol (SMP) passthrough support to CAM.

2010-11-30 22:39:46 +00:00