5cc0208a75
of volumes that might need administrator attention through device specific sysctl to simplify device monitoring. Submitted by: Deomid Ryabkov <myself at rojer dot pp dot ru>
1687 lines
43 KiB
C
1687 lines
43 KiB
C
/*-
|
|
* Routines for handling the integrated RAID features LSI MPT Fusion adapters.
|
|
*
|
|
* Copyright (c) 2005, WHEEL Sp. z o.o.
|
|
* Copyright (c) 2005 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon including
|
|
* a substantially similar Disclaimer requirement for further binary
|
|
* redistribution.
|
|
* 3. Neither the names of the above listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <dev/mpt/mpt.h>
|
|
#include <dev/mpt/mpt_raid.h>
|
|
|
|
#include "dev/mpt/mpilib/mpi_ioc.h" /* XXX Fix Event Handling!!! */
|
|
#include "dev/mpt/mpilib/mpi_raid.h"
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
|
|
#include <cam/cam_periph.h>
|
|
|
|
#include <sys/callout.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <machine/stdarg.h>
|
|
|
|
struct mpt_raid_action_result
|
|
{
|
|
union {
|
|
MPI_RAID_VOL_INDICATOR indicator_struct;
|
|
uint32_t new_settings;
|
|
uint8_t phys_disk_num;
|
|
} action_data;
|
|
uint16_t action_status;
|
|
};
|
|
|
|
#define REQ_TO_RAID_ACTION_RESULT(req) ((struct mpt_raid_action_result *) \
|
|
(((MSG_RAID_ACTION_REQUEST *)(req->req_vbuf)) + 1))
|
|
|
|
#define REQ_IOCSTATUS(req) ((req)->IOCStatus & MPI_IOCSTATUS_MASK)
|
|
|
|
|
|
static mpt_probe_handler_t mpt_raid_probe;
|
|
static mpt_attach_handler_t mpt_raid_attach;
|
|
static mpt_event_handler_t mpt_raid_event;
|
|
static mpt_shutdown_handler_t mpt_raid_shutdown;
|
|
static mpt_reset_handler_t mpt_raid_ioc_reset;
|
|
static mpt_detach_handler_t mpt_raid_detach;
|
|
|
|
static struct mpt_personality mpt_raid_personality =
|
|
{
|
|
.name = "mpt_raid",
|
|
.probe = mpt_raid_probe,
|
|
.attach = mpt_raid_attach,
|
|
.event = mpt_raid_event,
|
|
.reset = mpt_raid_ioc_reset,
|
|
.shutdown = mpt_raid_shutdown,
|
|
.detach = mpt_raid_detach,
|
|
};
|
|
|
|
DECLARE_MPT_PERSONALITY(mpt_raid, SI_ORDER_THIRD);
|
|
MPT_PERSONALITY_DEPEND(mpt_raid, mpt_cam, 1, 1, 1);
|
|
|
|
static mpt_reply_handler_t mpt_raid_reply_handler;
|
|
static int mpt_raid_reply_frame_handler(struct mpt_softc *mpt, request_t *req,
|
|
MSG_DEFAULT_REPLY *reply_frame);
|
|
static int mpt_spawn_raid_thread(struct mpt_softc *mpt);
|
|
static void mpt_terminate_raid_thread(struct mpt_softc *mpt);
|
|
static void mpt_raid_thread(void *arg);
|
|
static timeout_t mpt_raid_timer;
|
|
static timeout_t mpt_raid_quiesce_timeout;
|
|
#if UNUSED
|
|
static void mpt_enable_vol(struct mpt_softc *mpt,
|
|
struct mpt_raid_volume *mpt_vol, int enable);
|
|
#endif
|
|
static void mpt_verify_mwce(struct mpt_softc *mpt,
|
|
struct mpt_raid_volume *mpt_vol);
|
|
static void mpt_adjust_queue_depth(struct mpt_softc *mpt,
|
|
struct mpt_raid_volume *mpt_vol,
|
|
struct cam_path *path);
|
|
static void mpt_raid_sysctl_attach(struct mpt_softc *mpt);
|
|
|
|
static uint32_t raid_handler_id = MPT_HANDLER_ID_NONE;
|
|
|
|
const char *
|
|
mpt_vol_type(struct mpt_raid_volume *vol)
|
|
{
|
|
switch (vol->config_page->VolumeType) {
|
|
case MPI_RAID_VOL_TYPE_IS:
|
|
return ("RAID-0");
|
|
case MPI_RAID_VOL_TYPE_IME:
|
|
return ("RAID-1E");
|
|
case MPI_RAID_VOL_TYPE_IM:
|
|
return ("RAID-1");
|
|
default:
|
|
return ("Unknown");
|
|
}
|
|
}
|
|
|
|
const char *
|
|
mpt_vol_state(struct mpt_raid_volume *vol)
|
|
{
|
|
switch (vol->config_page->VolumeStatus.State) {
|
|
case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
|
|
return ("Optimal");
|
|
case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
|
|
return ("Degraded");
|
|
case MPI_RAIDVOL0_STATUS_STATE_FAILED:
|
|
return ("Failed");
|
|
default:
|
|
return ("Unknown");
|
|
}
|
|
}
|
|
|
|
const char *
|
|
mpt_disk_state(struct mpt_raid_disk *disk)
|
|
{
|
|
switch (disk->config_page.PhysDiskStatus.State) {
|
|
case MPI_PHYSDISK0_STATUS_ONLINE:
|
|
return ("Online");
|
|
case MPI_PHYSDISK0_STATUS_MISSING:
|
|
return ("Missing");
|
|
case MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE:
|
|
return ("Incompatible");
|
|
case MPI_PHYSDISK0_STATUS_FAILED:
|
|
return ("Failed");
|
|
case MPI_PHYSDISK0_STATUS_INITIALIZING:
|
|
return ("Initializing");
|
|
case MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED:
|
|
return ("Offline Requested");
|
|
case MPI_PHYSDISK0_STATUS_FAILED_REQUESTED:
|
|
return ("Failed per Host Request");
|
|
case MPI_PHYSDISK0_STATUS_OTHER_OFFLINE:
|
|
return ("Offline");
|
|
default:
|
|
return ("Unknown");
|
|
}
|
|
}
|
|
|
|
void
|
|
mpt_vol_prt(struct mpt_softc *mpt, struct mpt_raid_volume *vol,
|
|
const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
|
|
printf("%s:vol%d(%s:%d:%d): ", device_get_nameunit(mpt->dev),
|
|
(u_int)(vol - mpt->raid_volumes), device_get_nameunit(mpt->dev),
|
|
vol->config_page->VolumeBus, vol->config_page->VolumeID);
|
|
va_start(ap, fmt);
|
|
vprintf(fmt, ap);
|
|
va_end(ap);
|
|
}
|
|
|
|
void
|
|
mpt_disk_prt(struct mpt_softc *mpt, struct mpt_raid_disk *disk,
|
|
const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
|
|
if (disk->volume != NULL) {
|
|
printf("(%s:vol%d:%d): ",
|
|
device_get_nameunit(mpt->dev),
|
|
disk->volume->config_page->VolumeID,
|
|
disk->member_number);
|
|
} else {
|
|
printf("(%s:%d:%d): ", device_get_nameunit(mpt->dev),
|
|
disk->config_page.PhysDiskBus,
|
|
disk->config_page.PhysDiskID);
|
|
}
|
|
va_start(ap, fmt);
|
|
vprintf(fmt, ap);
|
|
va_end(ap);
|
|
}
|
|
|
|
static void
|
|
mpt_raid_async(void *callback_arg, u_int32_t code,
|
|
struct cam_path *path, void *arg)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
|
|
mpt = (struct mpt_softc*)callback_arg;
|
|
switch (code) {
|
|
case AC_FOUND_DEVICE:
|
|
{
|
|
struct ccb_getdev *cgd;
|
|
struct mpt_raid_volume *mpt_vol;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
if (cgd == NULL)
|
|
break;
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, " Callback for %d\n",
|
|
cgd->ccb_h.target_id);
|
|
|
|
RAID_VOL_FOREACH(mpt, mpt_vol) {
|
|
if ((mpt_vol->flags & MPT_RVF_ACTIVE) == 0)
|
|
continue;
|
|
|
|
if (mpt_vol->config_page->VolumeID
|
|
== cgd->ccb_h.target_id) {
|
|
mpt_adjust_queue_depth(mpt, mpt_vol, path);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
int
|
|
mpt_raid_probe(struct mpt_softc *mpt)
|
|
{
|
|
if (mpt->ioc_page2 == NULL
|
|
|| mpt->ioc_page2->MaxPhysDisks == 0)
|
|
return (ENODEV);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_raid_attach(struct mpt_softc *mpt)
|
|
{
|
|
struct ccb_setasync csa;
|
|
mpt_handler_t handler;
|
|
int error;
|
|
|
|
mpt_callout_init(&mpt->raid_timer);
|
|
|
|
handler.reply_handler = mpt_raid_reply_handler;
|
|
error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
|
|
&raid_handler_id);
|
|
if (error != 0)
|
|
goto cleanup;
|
|
|
|
error = mpt_spawn_raid_thread(mpt);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "Unable to spawn RAID thread!\n");
|
|
goto cleanup;
|
|
}
|
|
|
|
xpt_setup_ccb(&csa.ccb_h, mpt->path, /*priority*/5);
|
|
csa.ccb_h.func_code = XPT_SASYNC_CB;
|
|
csa.event_enable = AC_FOUND_DEVICE;
|
|
csa.callback = mpt_raid_async;
|
|
csa.callback_arg = mpt;
|
|
xpt_action((union ccb *)&csa);
|
|
if (csa.ccb_h.status != CAM_REQ_CMP) {
|
|
mpt_prt(mpt, "mpt_raid_attach: Unable to register "
|
|
"CAM async handler.\n");
|
|
}
|
|
|
|
mpt_raid_sysctl_attach(mpt);
|
|
return (0);
|
|
cleanup:
|
|
mpt_raid_detach(mpt);
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
mpt_raid_detach(struct mpt_softc *mpt)
|
|
{
|
|
struct ccb_setasync csa;
|
|
mpt_handler_t handler;
|
|
|
|
callout_stop(&mpt->raid_timer);
|
|
mpt_terminate_raid_thread(mpt);
|
|
|
|
handler.reply_handler = mpt_raid_reply_handler;
|
|
mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
|
|
raid_handler_id);
|
|
xpt_setup_ccb(&csa.ccb_h, mpt->path, /*priority*/5);
|
|
csa.ccb_h.func_code = XPT_SASYNC_CB;
|
|
csa.event_enable = 0;
|
|
csa.callback = mpt_raid_async;
|
|
csa.callback_arg = mpt;
|
|
xpt_action((union ccb *)&csa);
|
|
}
|
|
|
|
static void
|
|
mpt_raid_ioc_reset(struct mpt_softc *mpt, int type)
|
|
{
|
|
/* Nothing to do yet. */
|
|
}
|
|
|
|
static const char *raid_event_txt[] =
|
|
{
|
|
"Volume Created",
|
|
"Volume Deleted",
|
|
"Volume Settings Changed",
|
|
"Volume Status Changed",
|
|
"Volume Physical Disk Membership Changed",
|
|
"Physical Disk Created",
|
|
"Physical Disk Deleted",
|
|
"Physical Disk Settings Changed",
|
|
"Physical Disk Status Changed",
|
|
"Domain Validation Required",
|
|
"SMART Data Received",
|
|
"Replace Action Started",
|
|
};
|
|
|
|
static int
|
|
mpt_raid_event(struct mpt_softc *mpt, request_t *req,
|
|
MSG_EVENT_NOTIFY_REPLY *msg)
|
|
{
|
|
EVENT_DATA_RAID *raid_event;
|
|
struct mpt_raid_volume *mpt_vol;
|
|
struct mpt_raid_disk *mpt_disk;
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
int i;
|
|
int print_event;
|
|
|
|
if (msg->Event != MPI_EVENT_INTEGRATED_RAID)
|
|
return (/*handled*/0);
|
|
|
|
raid_event = (EVENT_DATA_RAID *)&msg->Data;
|
|
|
|
mpt_vol = NULL;
|
|
vol_pg = NULL;
|
|
if (mpt->raid_volumes != NULL && mpt->ioc_page2 != NULL) {
|
|
for (i = 0; i < mpt->ioc_page2->MaxVolumes; i++) {
|
|
mpt_vol = &mpt->raid_volumes[i];
|
|
vol_pg = mpt_vol->config_page;
|
|
|
|
if ((mpt_vol->flags & MPT_RVF_ACTIVE) == 0)
|
|
continue;
|
|
|
|
if (vol_pg->VolumeID == raid_event->VolumeID
|
|
&& vol_pg->VolumeBus == raid_event->VolumeBus)
|
|
break;
|
|
}
|
|
if (i >= mpt->ioc_page2->MaxVolumes) {
|
|
mpt_vol = NULL;
|
|
vol_pg = NULL;
|
|
}
|
|
}
|
|
|
|
mpt_disk = NULL;
|
|
if (raid_event->PhysDiskNum != 0xFF
|
|
&& mpt->raid_disks != NULL) {
|
|
mpt_disk = mpt->raid_disks
|
|
+ raid_event->PhysDiskNum;
|
|
if ((mpt_disk->flags & MPT_RDF_ACTIVE) == 0)
|
|
mpt_disk = NULL;
|
|
}
|
|
|
|
print_event = 1;
|
|
switch(raid_event->ReasonCode) {
|
|
case MPI_EVENT_RAID_RC_VOLUME_CREATED:
|
|
case MPI_EVENT_RAID_RC_VOLUME_DELETED:
|
|
break;
|
|
case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
|
|
if (mpt_vol != NULL) {
|
|
if ((mpt_vol->flags & MPT_RVF_UP2DATE) != 0) {
|
|
mpt_vol->flags &= ~MPT_RVF_UP2DATE;
|
|
} else {
|
|
/*
|
|
* Coalesce status messages into one
|
|
* per background run of our RAID thread.
|
|
* This removes "spurious" status messages
|
|
* from our output.
|
|
*/
|
|
print_event = 0;
|
|
}
|
|
}
|
|
break;
|
|
case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
|
|
case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
|
|
mpt->raid_rescan++;
|
|
if (mpt_vol != NULL)
|
|
mpt_vol->flags &= ~(MPT_RVF_UP2DATE|MPT_RVF_ANNOUNCED);
|
|
break;
|
|
case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
|
|
case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
|
|
mpt->raid_rescan++;
|
|
break;
|
|
case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
|
|
case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
|
|
mpt->raid_rescan++;
|
|
if (mpt_disk != NULL)
|
|
mpt_disk->flags &= ~MPT_RDF_UP2DATE;
|
|
break;
|
|
case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
|
|
mpt->raid_rescan++;
|
|
break;
|
|
case MPI_EVENT_RAID_RC_SMART_DATA:
|
|
case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
|
|
break;
|
|
}
|
|
|
|
if (print_event) {
|
|
if (mpt_disk != NULL) {
|
|
mpt_disk_prt(mpt, mpt_disk, "");
|
|
} else if (mpt_vol != NULL) {
|
|
mpt_vol_prt(mpt, mpt_vol, "");
|
|
} else {
|
|
mpt_prt(mpt, "Volume(%d:%d", raid_event->VolumeBus,
|
|
raid_event->VolumeID);
|
|
|
|
if (raid_event->PhysDiskNum != 0xFF)
|
|
mpt_prtc(mpt, ":%d): ",
|
|
raid_event->PhysDiskNum);
|
|
else
|
|
mpt_prtc(mpt, "): ");
|
|
}
|
|
|
|
if (raid_event->ReasonCode >= NUM_ELEMENTS(raid_event_txt))
|
|
mpt_prtc(mpt, "Unhandled RaidEvent %#x\n",
|
|
raid_event->ReasonCode);
|
|
else
|
|
mpt_prtc(mpt, "%s\n",
|
|
raid_event_txt[raid_event->ReasonCode]);
|
|
}
|
|
|
|
if (raid_event->ReasonCode == MPI_EVENT_RAID_RC_SMART_DATA) {
|
|
/* XXX Use CAM's print sense for this... */
|
|
if (mpt_disk != NULL)
|
|
mpt_disk_prt(mpt, mpt_disk, "");
|
|
else
|
|
mpt_prt(mpt, "Volume(%d:%d:%d: ");
|
|
mpt_prtc(mpt, "ASC 0x%x, ASCQ 0x%x\n",
|
|
raid_event->ASC, raid_event->ASCQ);
|
|
}
|
|
|
|
mpt_raid_wakeup(mpt);
|
|
return (/*handled*/1);
|
|
}
|
|
|
|
static void
|
|
mpt_raid_shutdown(struct mpt_softc *mpt)
|
|
{
|
|
struct mpt_raid_volume *mpt_vol;
|
|
|
|
if (mpt->raid_mwce_setting != MPT_RAID_MWCE_REBUILD_ONLY)
|
|
return;
|
|
|
|
mpt->raid_mwce_setting = MPT_RAID_MWCE_OFF;
|
|
RAID_VOL_FOREACH(mpt, mpt_vol) {
|
|
|
|
mpt_verify_mwce(mpt, mpt_vol);
|
|
}
|
|
}
|
|
|
|
static int
|
|
mpt_raid_reply_handler(struct mpt_softc *mpt, request_t *req,
|
|
MSG_DEFAULT_REPLY *reply_frame)
|
|
{
|
|
int free_req;
|
|
|
|
if (req == NULL)
|
|
return (/*free_reply*/TRUE);
|
|
|
|
free_req = TRUE;
|
|
if (reply_frame != NULL)
|
|
free_req = mpt_raid_reply_frame_handler(mpt, req, reply_frame);
|
|
#if NOTYET
|
|
else if (req->ccb != NULL) {
|
|
/* Complete Quiesce CCB with error... */
|
|
}
|
|
#endif
|
|
|
|
req->state &= ~REQ_STATE_QUEUED;
|
|
req->state |= REQ_STATE_DONE;
|
|
TAILQ_REMOVE(&mpt->request_pending_list, req, links);
|
|
|
|
if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) {
|
|
wakeup(req);
|
|
} else if (free_req) {
|
|
mpt_free_request(mpt, req);
|
|
}
|
|
|
|
return (/*free_reply*/TRUE);
|
|
}
|
|
|
|
/*
|
|
* Parse additional completion information in the reply
|
|
* frame for RAID I/O requests.
|
|
*/
|
|
static int
|
|
mpt_raid_reply_frame_handler(struct mpt_softc *mpt, request_t *req,
|
|
MSG_DEFAULT_REPLY *reply_frame)
|
|
{
|
|
MSG_RAID_ACTION_REPLY *reply;
|
|
struct mpt_raid_action_result *action_result;
|
|
MSG_RAID_ACTION_REQUEST *rap;
|
|
|
|
reply = (MSG_RAID_ACTION_REPLY *)reply_frame;
|
|
req->IOCStatus = le16toh(reply->IOCStatus);
|
|
rap = (MSG_RAID_ACTION_REQUEST *)req->req_vbuf;
|
|
|
|
switch (rap->Action) {
|
|
case MPI_RAID_ACTION_QUIESCE_PHYS_IO:
|
|
/*
|
|
* Parse result, call mpt_start with ccb,
|
|
* release device queue.
|
|
* COWWWWW
|
|
*/
|
|
break;
|
|
case MPI_RAID_ACTION_ENABLE_PHYS_IO:
|
|
/*
|
|
* Need additional state for transition to enabled to
|
|
* protect against attempts to disable??
|
|
*/
|
|
break;
|
|
default:
|
|
action_result = REQ_TO_RAID_ACTION_RESULT(req);
|
|
memcpy(&action_result->action_data, &reply->ActionData,
|
|
sizeof(action_result->action_data));
|
|
action_result->action_status = reply->ActionStatus;
|
|
break;
|
|
}
|
|
|
|
return (/*Free Request*/TRUE);
|
|
}
|
|
|
|
/*
|
|
* Utiltity routine to perform a RAID action command;
|
|
*/
|
|
int
|
|
mpt_issue_raid_req(struct mpt_softc *mpt, struct mpt_raid_volume *vol,
|
|
struct mpt_raid_disk *disk, request_t *req, u_int Action,
|
|
uint32_t ActionDataWord, bus_addr_t addr, bus_size_t len,
|
|
int write, int wait)
|
|
{
|
|
MSG_RAID_ACTION_REQUEST *rap;
|
|
SGE_SIMPLE32 *se;
|
|
|
|
rap = req->req_vbuf;
|
|
memset(rap, 0, sizeof *rap);
|
|
rap->Action = Action;
|
|
rap->ActionDataWord = ActionDataWord;
|
|
rap->Function = MPI_FUNCTION_RAID_ACTION;
|
|
rap->VolumeID = vol->config_page->VolumeID;
|
|
rap->VolumeBus = vol->config_page->VolumeBus;
|
|
if (disk != 0)
|
|
rap->PhysDiskNum = disk->config_page.PhysDiskNum;
|
|
else
|
|
rap->PhysDiskNum = 0xFF;
|
|
se = (SGE_SIMPLE32 *)&rap->ActionDataSGE;
|
|
se->Address = addr;
|
|
MPI_pSGE_SET_LENGTH(se, len);
|
|
MPI_pSGE_SET_FLAGS(se, (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
|
|
MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
|
|
MPI_SGE_FLAGS_END_OF_LIST |
|
|
write ? MPI_SGE_FLAGS_HOST_TO_IOC : MPI_SGE_FLAGS_IOC_TO_HOST));
|
|
rap->MsgContext = htole32(req->index | raid_handler_id);
|
|
|
|
mpt_check_doorbell(mpt);
|
|
mpt_send_cmd(mpt, req);
|
|
|
|
if (wait) {
|
|
return (mpt_wait_req(mpt, req, REQ_STATE_DONE, REQ_STATE_DONE,
|
|
/*sleep_ok*/FALSE, /*time_ms*/2000));
|
|
} else {
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
/*************************** RAID Status Monitoring ***************************/
|
|
static int
|
|
mpt_spawn_raid_thread(struct mpt_softc *mpt)
|
|
{
|
|
int error;
|
|
|
|
/*
|
|
* Freeze out any CAM transactions until our thread
|
|
* is able to run at least once. We need to update
|
|
* our RAID pages before acception I/O or we may
|
|
* reject I/O to an ID we later determine is for a
|
|
* hidden physdisk.
|
|
*/
|
|
xpt_freeze_simq(mpt->phydisk_sim, 1);
|
|
error = mpt_kthread_create(mpt_raid_thread, mpt,
|
|
&mpt->raid_thread, /*flags*/0, /*altstack*/0,
|
|
"mpt_raid%d", mpt->unit);
|
|
if (error != 0)
|
|
xpt_release_simq(mpt->phydisk_sim, /*run_queue*/FALSE);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Lock is not held on entry.
|
|
*/
|
|
static void
|
|
mpt_terminate_raid_thread(struct mpt_softc *mpt)
|
|
{
|
|
|
|
MPT_LOCK(mpt);
|
|
if (mpt->raid_thread == NULL) {
|
|
MPT_UNLOCK(mpt);
|
|
return;
|
|
}
|
|
mpt->shutdwn_raid = 1;
|
|
wakeup(mpt->raid_volumes);
|
|
/*
|
|
* Sleep on a slightly different location
|
|
* for this interlock just for added safety.
|
|
*/
|
|
mpt_sleep(mpt, &mpt->raid_thread, PUSER, "thtrm", 0);
|
|
MPT_UNLOCK(mpt);
|
|
}
|
|
|
|
static void
|
|
mpt_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb)
|
|
{
|
|
xpt_free_path(ccb->ccb_h.path);
|
|
free(ccb, M_DEVBUF);
|
|
}
|
|
|
|
static void
|
|
mpt_raid_thread(void *arg)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
int firstrun;
|
|
|
|
#if __FreeBSD_version >= 500000
|
|
mtx_lock(&Giant);
|
|
#endif
|
|
mpt = (struct mpt_softc *)arg;
|
|
firstrun = 1;
|
|
MPT_LOCK(mpt);
|
|
while (mpt->shutdwn_raid == 0) {
|
|
|
|
if (mpt->raid_wakeup == 0) {
|
|
mpt_sleep(mpt, &mpt->raid_volumes, PUSER, "idle", 0);
|
|
continue;
|
|
}
|
|
|
|
mpt->raid_wakeup = 0;
|
|
|
|
mpt_refresh_raid_data(mpt);
|
|
|
|
/*
|
|
* Now that we have our first snapshot of RAID data,
|
|
* allow CAM to access our physical disk bus.
|
|
*/
|
|
if (firstrun) {
|
|
firstrun = 0;
|
|
xpt_release_simq(mpt->phydisk_sim, /*run_queue*/TRUE);
|
|
}
|
|
|
|
if (mpt->raid_rescan != 0) {
|
|
union ccb *ccb;
|
|
struct cam_path *path;
|
|
int error;
|
|
|
|
mpt->raid_rescan = 0;
|
|
|
|
ccb = malloc(sizeof(*ccb), M_DEVBUF, M_WAITOK);
|
|
error = xpt_create_path(&path, xpt_periph,
|
|
cam_sim_path(mpt->phydisk_sim),
|
|
CAM_TARGET_WILDCARD,
|
|
CAM_LUN_WILDCARD);
|
|
if (error != CAM_REQ_CMP) {
|
|
free(ccb, M_DEVBUF);
|
|
mpt_prt(mpt, "Unable to rescan RAID Bus!\n");
|
|
} else {
|
|
xpt_setup_ccb(&ccb->ccb_h, path, /*priority*/5);
|
|
ccb->ccb_h.func_code = XPT_SCAN_BUS;
|
|
ccb->ccb_h.cbfcnp = mpt_cam_rescan_callback;
|
|
ccb->crcn.flags = CAM_FLAG_NONE;
|
|
xpt_action(ccb);
|
|
}
|
|
}
|
|
}
|
|
mpt->raid_thread = NULL;
|
|
wakeup(&mpt->raid_thread);
|
|
MPT_UNLOCK(mpt);
|
|
#if __FreeBSD_version >= 500000
|
|
mtx_unlock(&Giant);
|
|
#endif
|
|
kthread_exit(0);
|
|
}
|
|
|
|
cam_status
|
|
mpt_raid_quiesce_disk(struct mpt_softc *mpt, struct mpt_raid_disk *mpt_disk,
|
|
request_t *req)
|
|
{
|
|
union ccb *ccb;
|
|
|
|
ccb = req->ccb;
|
|
if ((mpt_disk->flags & MPT_RDF_QUIESCED) != 0)
|
|
return (CAM_REQ_CMP);
|
|
|
|
if ((mpt_disk->flags & MPT_RDF_QUIESCING) == 0) {
|
|
int rv;
|
|
|
|
mpt_disk->flags |= MPT_RDF_QUIESCING;
|
|
xpt_freeze_devq(ccb->ccb_h.path, 1);
|
|
|
|
rv = mpt_issue_raid_req(mpt, mpt_disk->volume, mpt_disk, req,
|
|
MPI_RAID_ACTION_QUIESCE_PHYS_IO,
|
|
/*ActionData*/0, /*addr*/0,
|
|
/*len*/0, /*write*/FALSE,
|
|
/*wait*/FALSE);
|
|
if (rv != 0)
|
|
return (CAM_REQ_CMP_ERR);
|
|
|
|
ccb->ccb_h.timeout_ch =
|
|
timeout(mpt_raid_quiesce_timeout, (caddr_t)ccb, 5 * hz);
|
|
#if 0
|
|
if (rv == ETIMEDOUT) {
|
|
mpt_disk_prt(mpt, mpt_disk, "mpt_raid_quiesce_disk: "
|
|
"Quiece Timed-out\n");
|
|
xpt_release_devq(ccb->ccb_h.path, 1, /*run*/0);
|
|
return (CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
ar = REQ_TO_RAID_ACTION_RESULT(req);
|
|
if (rv != 0
|
|
|| REQ_IOCSTATUS(req) != MPI_IOCSTATUS_SUCCESS
|
|
|| (ar->action_status != MPI_RAID_ACTION_ASTATUS_SUCCESS)) {
|
|
mpt_disk_prt(mpt, mpt_disk, "Quiece Failed"
|
|
"%d:%x:%x\n", rv, req->IOCStatus,
|
|
ar->action_status);
|
|
xpt_release_devq(ccb->ccb_h.path, 1, /*run*/0);
|
|
return (CAM_REQ_CMP_ERR);
|
|
}
|
|
#endif
|
|
return (CAM_REQ_INPROG);
|
|
}
|
|
return (CAM_REQUEUE_REQ);
|
|
}
|
|
|
|
/* XXX Ignores that there may be multiple busses/IOCs involved. */
|
|
cam_status
|
|
mpt_map_physdisk(struct mpt_softc *mpt, union ccb *ccb, u_int *tgt)
|
|
{
|
|
struct mpt_raid_disk *mpt_disk;
|
|
|
|
mpt_disk = mpt->raid_disks + ccb->ccb_h.target_id;
|
|
if (ccb->ccb_h.target_id < mpt->raid_max_disks
|
|
&& (mpt_disk->flags & MPT_RDF_ACTIVE) != 0) {
|
|
|
|
*tgt = mpt_disk->config_page.PhysDiskID;
|
|
return (0);
|
|
}
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_map_physdisk(%d) - Not Active\n",
|
|
ccb->ccb_h.target_id);
|
|
return (-1);
|
|
}
|
|
|
|
#if UNUSED
|
|
static void
|
|
mpt_enable_vol(struct mpt_softc *mpt, struct mpt_raid_volume *mpt_vol,
|
|
int enable)
|
|
{
|
|
request_t *req;
|
|
struct mpt_raid_action_result *ar;
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
int enabled;
|
|
int rv;
|
|
|
|
vol_pg = mpt_vol->config_page;
|
|
enabled = vol_pg->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED;
|
|
|
|
/*
|
|
* If the setting matches the configuration,
|
|
* there is nothing to do.
|
|
*/
|
|
if ((enabled && enable)
|
|
|| (!enabled && !enable))
|
|
return;
|
|
|
|
req = mpt_get_request(mpt, /*sleep_ok*/TRUE);
|
|
if (req == NULL) {
|
|
mpt_vol_prt(mpt, mpt_vol,
|
|
"mpt_enable_vol: Get request failed!\n");
|
|
return;
|
|
}
|
|
|
|
rv = mpt_issue_raid_req(mpt, mpt_vol, /*disk*/NULL, req,
|
|
enable ? MPI_RAID_ACTION_ENABLE_VOLUME
|
|
: MPI_RAID_ACTION_DISABLE_VOLUME,
|
|
/*data*/0, /*addr*/0, /*len*/0,
|
|
/*write*/FALSE, /*wait*/TRUE);
|
|
if (rv == ETIMEDOUT) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_enable_vol: "
|
|
"%s Volume Timed-out\n",
|
|
enable ? "Enable" : "Disable");
|
|
return;
|
|
}
|
|
ar = REQ_TO_RAID_ACTION_RESULT(req);
|
|
if (rv != 0
|
|
|| REQ_IOCSTATUS(req) != MPI_IOCSTATUS_SUCCESS
|
|
|| (ar->action_status != MPI_RAID_ACTION_ASTATUS_SUCCESS)) {
|
|
mpt_vol_prt(mpt, mpt_vol, "%s Volume Failed: %d:%x:%x\n",
|
|
enable ? "Enable" : "Disable",
|
|
rv, req->IOCStatus, ar->action_status);
|
|
}
|
|
|
|
mpt_free_request(mpt, req);
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
mpt_verify_mwce(struct mpt_softc *mpt, struct mpt_raid_volume *mpt_vol)
|
|
{
|
|
request_t *req;
|
|
struct mpt_raid_action_result *ar;
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
uint32_t data;
|
|
int rv;
|
|
int resyncing;
|
|
int mwce;
|
|
|
|
vol_pg = mpt_vol->config_page;
|
|
resyncing = vol_pg->VolumeStatus.Flags
|
|
& MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS;
|
|
mwce = vol_pg->VolumeSettings.Settings
|
|
& MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE;
|
|
|
|
/*
|
|
* If the setting matches the configuration,
|
|
* there is nothing to do.
|
|
*/
|
|
switch (mpt->raid_mwce_setting) {
|
|
case MPT_RAID_MWCE_REBUILD_ONLY:
|
|
if ((resyncing && mwce)
|
|
|| (!resyncing && !mwce))
|
|
return;
|
|
|
|
mpt_vol->flags ^= MPT_RVF_WCE_CHANGED;
|
|
if ((mpt_vol->flags & MPT_RVF_WCE_CHANGED) == 0) {
|
|
/*
|
|
* Wait one more status update to see if
|
|
* resyncing gets enabled. It gets disabled
|
|
* temporarilly when WCE is changed.
|
|
*/
|
|
return;
|
|
}
|
|
break;
|
|
case MPT_RAID_MWCE_ON:
|
|
if (mwce)
|
|
return;
|
|
break;
|
|
case MPT_RAID_MWCE_OFF:
|
|
if (!mwce)
|
|
return;
|
|
break;
|
|
case MPT_RAID_MWCE_NC:
|
|
return;
|
|
}
|
|
|
|
req = mpt_get_request(mpt, /*sleep_ok*/TRUE);
|
|
if (req == NULL) {
|
|
mpt_vol_prt(mpt, mpt_vol,
|
|
"mpt_verify_mwce: Get request failed!\n");
|
|
return;
|
|
}
|
|
|
|
vol_pg->VolumeSettings.Settings ^=
|
|
MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE;
|
|
memcpy(&data, &vol_pg->VolumeSettings, sizeof(data));
|
|
vol_pg->VolumeSettings.Settings ^=
|
|
MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE;
|
|
rv = mpt_issue_raid_req(mpt, mpt_vol, /*disk*/NULL, req,
|
|
MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS,
|
|
data, /*addr*/0, /*len*/0,
|
|
/*write*/FALSE, /*wait*/TRUE);
|
|
if (rv == ETIMEDOUT) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_verify_mwce: "
|
|
"Write Cache Enable Timed-out\n");
|
|
return;
|
|
}
|
|
ar = REQ_TO_RAID_ACTION_RESULT(req);
|
|
if (rv != 0
|
|
|| REQ_IOCSTATUS(req) != MPI_IOCSTATUS_SUCCESS
|
|
|| (ar->action_status != MPI_RAID_ACTION_ASTATUS_SUCCESS)) {
|
|
mpt_vol_prt(mpt, mpt_vol, "Write Cache Enable Failed: "
|
|
"%d:%x:%x\n", rv, req->IOCStatus,
|
|
ar->action_status);
|
|
} else {
|
|
vol_pg->VolumeSettings.Settings ^=
|
|
MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE;
|
|
}
|
|
|
|
mpt_free_request(mpt, req);
|
|
}
|
|
|
|
static void
|
|
mpt_verify_resync_rate(struct mpt_softc *mpt, struct mpt_raid_volume *mpt_vol)
|
|
{
|
|
request_t *req;
|
|
struct mpt_raid_action_result *ar;
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
u_int prio;
|
|
int rv;
|
|
|
|
vol_pg = mpt_vol->config_page;
|
|
|
|
if (mpt->raid_resync_rate == MPT_RAID_RESYNC_RATE_NC)
|
|
return;
|
|
|
|
/*
|
|
* If the current RAID resync rate does not
|
|
* match our configured rate, update it.
|
|
*/
|
|
prio = vol_pg->VolumeSettings.Settings
|
|
& MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC;
|
|
if (vol_pg->ResyncRate != 0
|
|
&& vol_pg->ResyncRate != mpt->raid_resync_rate) {
|
|
|
|
req = mpt_get_request(mpt, /*sleep_ok*/TRUE);
|
|
if (req == NULL) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_verify_resync_rate: "
|
|
"Get request failed!\n");
|
|
return;
|
|
}
|
|
|
|
rv = mpt_issue_raid_req(mpt, mpt_vol, /*disk*/NULL, req,
|
|
MPI_RAID_ACTION_SET_RESYNC_RATE,
|
|
mpt->raid_resync_rate, /*addr*/0,
|
|
/*len*/0, /*write*/FALSE, /*wait*/TRUE);
|
|
if (rv == ETIMEDOUT) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_refresh_raid_data: "
|
|
"Resync Rate Setting Timed-out\n");
|
|
return;
|
|
}
|
|
|
|
ar = REQ_TO_RAID_ACTION_RESULT(req);
|
|
if (rv != 0
|
|
|| REQ_IOCSTATUS(req) != MPI_IOCSTATUS_SUCCESS
|
|
|| (ar->action_status != MPI_RAID_ACTION_ASTATUS_SUCCESS)) {
|
|
mpt_vol_prt(mpt, mpt_vol, "Resync Rate Setting Failed: "
|
|
"%d:%x:%x\n", rv, req->IOCStatus,
|
|
ar->action_status);
|
|
} else
|
|
vol_pg->ResyncRate = mpt->raid_resync_rate;
|
|
mpt_free_request(mpt, req);
|
|
} else if ((prio && mpt->raid_resync_rate < 128)
|
|
|| (!prio && mpt->raid_resync_rate >= 128)) {
|
|
uint32_t data;
|
|
|
|
req = mpt_get_request(mpt, /*sleep_ok*/TRUE);
|
|
if (req == NULL) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_verify_resync_rate: "
|
|
"Get request failed!\n");
|
|
return;
|
|
}
|
|
|
|
vol_pg->VolumeSettings.Settings ^=
|
|
MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC;
|
|
memcpy(&data, &vol_pg->VolumeSettings, sizeof(data));
|
|
vol_pg->VolumeSettings.Settings ^=
|
|
MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC;
|
|
rv = mpt_issue_raid_req(mpt, mpt_vol, /*disk*/NULL, req,
|
|
MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS,
|
|
data, /*addr*/0, /*len*/0,
|
|
/*write*/FALSE, /*wait*/TRUE);
|
|
if (rv == ETIMEDOUT) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_refresh_raid_data: "
|
|
"Resync Rate Setting Timed-out\n");
|
|
return;
|
|
}
|
|
ar = REQ_TO_RAID_ACTION_RESULT(req);
|
|
if (rv != 0
|
|
|| REQ_IOCSTATUS(req) != MPI_IOCSTATUS_SUCCESS
|
|
|| (ar->action_status != MPI_RAID_ACTION_ASTATUS_SUCCESS)) {
|
|
mpt_vol_prt(mpt, mpt_vol, "Resync Rate Setting Failed: "
|
|
"%d:%x:%x\n", rv, req->IOCStatus,
|
|
ar->action_status);
|
|
} else {
|
|
vol_pg->VolumeSettings.Settings ^=
|
|
MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC;
|
|
}
|
|
|
|
mpt_free_request(mpt, req);
|
|
}
|
|
}
|
|
|
|
static void
|
|
mpt_adjust_queue_depth(struct mpt_softc *mpt, struct mpt_raid_volume *mpt_vol,
|
|
struct cam_path *path)
|
|
{
|
|
struct ccb_relsim crs;
|
|
|
|
xpt_setup_ccb(&crs.ccb_h, path, /*priority*/5);
|
|
crs.ccb_h.func_code = XPT_REL_SIMQ;
|
|
crs.release_flags = RELSIM_ADJUST_OPENINGS;
|
|
crs.openings = mpt->raid_queue_depth;
|
|
xpt_action((union ccb *)&crs);
|
|
if (crs.ccb_h.status != CAM_REQ_CMP)
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_adjust_queue_depth failed "
|
|
"with CAM status %#x\n", crs.ccb_h.status);
|
|
}
|
|
|
|
static void
|
|
mpt_announce_vol(struct mpt_softc *mpt, struct mpt_raid_volume *mpt_vol)
|
|
{
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
u_int i;
|
|
|
|
vol_pg = mpt_vol->config_page;
|
|
mpt_vol_prt(mpt, mpt_vol, "Settings (");
|
|
for (i = 1; i <= 0x8000; i <<= 1) {
|
|
switch (vol_pg->VolumeSettings.Settings & i) {
|
|
case MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE:
|
|
mpt_prtc(mpt, " Member-WCE");
|
|
break;
|
|
case MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART:
|
|
mpt_prtc(mpt, " Offline-On-SMART-Err");
|
|
break;
|
|
case MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE:
|
|
mpt_prtc(mpt, " Hot-Plug-Spares");
|
|
break;
|
|
case MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC:
|
|
mpt_prtc(mpt, " High-Priority-ReSync");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
mpt_prtc(mpt, " )\n");
|
|
if (vol_pg->VolumeSettings.HotSparePool != 0) {
|
|
mpt_vol_prt(mpt, mpt_vol, "Using Spare Pool%s",
|
|
powerof2(vol_pg->VolumeSettings.HotSparePool)
|
|
? ":" : "s:");
|
|
for (i = 0; i < 8; i++) {
|
|
u_int mask;
|
|
|
|
mask = 0x1 << i;
|
|
if ((vol_pg->VolumeSettings.HotSparePool & mask) == 0)
|
|
continue;
|
|
mpt_prtc(mpt, " %d", i);
|
|
}
|
|
mpt_prtc(mpt, "\n");
|
|
}
|
|
mpt_vol_prt(mpt, mpt_vol, "%d Members:\n", vol_pg->NumPhysDisks);
|
|
for (i = 0; i < vol_pg->NumPhysDisks; i++){
|
|
struct mpt_raid_disk *mpt_disk;
|
|
CONFIG_PAGE_RAID_PHYS_DISK_0 *disk_pg;
|
|
|
|
mpt_disk = mpt->raid_disks
|
|
+ vol_pg->PhysDisk[i].PhysDiskNum;
|
|
disk_pg = &mpt_disk->config_page;
|
|
mpt_prtc(mpt, " ");
|
|
mpt_prtc(mpt, "(%s:%d:%d): ", device_get_nameunit(mpt->dev),
|
|
disk_pg->PhysDiskBus, disk_pg->PhysDiskID);
|
|
if (vol_pg->VolumeType == MPI_RAID_VOL_TYPE_IM)
|
|
mpt_prtc(mpt, "%s\n",
|
|
mpt_disk->member_number == 0
|
|
? "Primary" : "Secondary");
|
|
else
|
|
mpt_prtc(mpt, "Stripe Position %d\n",
|
|
mpt_disk->member_number);
|
|
}
|
|
}
|
|
|
|
static void
|
|
mpt_announce_disk(struct mpt_softc *mpt, struct mpt_raid_disk *mpt_disk)
|
|
{
|
|
CONFIG_PAGE_RAID_PHYS_DISK_0 *disk_pg;
|
|
u_int i;
|
|
|
|
disk_pg = &mpt_disk->config_page;
|
|
mpt_disk_prt(mpt, mpt_disk,
|
|
"Physical (%s:%d:%d), Pass-thru (%s:%d:%d)\n",
|
|
device_get_nameunit(mpt->dev), disk_pg->PhysDiskBus,
|
|
disk_pg->PhysDiskID, device_get_nameunit(mpt->dev),
|
|
/*bus*/1, mpt_disk - mpt->raid_disks);
|
|
|
|
if (disk_pg->PhysDiskSettings.HotSparePool == 0)
|
|
return;
|
|
mpt_disk_prt(mpt, mpt_disk, "Member of Hot Spare Pool%s",
|
|
powerof2(disk_pg->PhysDiskSettings.HotSparePool)
|
|
? ":" : "s:");
|
|
for (i = 0; i < 8; i++) {
|
|
u_int mask;
|
|
|
|
mask = 0x1 << i;
|
|
if ((disk_pg->PhysDiskSettings.HotSparePool & mask) == 0)
|
|
continue;
|
|
mpt_prtc(mpt, " %d", i);
|
|
}
|
|
mpt_prtc(mpt, "\n");
|
|
}
|
|
|
|
static void
|
|
mpt_refresh_raid_disk(struct mpt_softc *mpt, struct mpt_raid_disk *mpt_disk,
|
|
IOC_3_PHYS_DISK *ioc_disk)
|
|
{
|
|
int rv;
|
|
|
|
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_RAID_PHYSDISK,
|
|
/*PageNumber*/0, ioc_disk->PhysDiskNum,
|
|
&mpt_disk->config_page.Header,
|
|
/*sleep_ok*/TRUE, /*timeout_ms*/5000);
|
|
if (rv != 0) {
|
|
mpt_prt(mpt, "mpt_refresh_raid_disk: "
|
|
"Failed to read RAID Disk Hdr(%d)\n",
|
|
ioc_disk->PhysDiskNum);
|
|
return;
|
|
}
|
|
rv = mpt_read_cur_cfg_page(mpt, ioc_disk->PhysDiskNum,
|
|
&mpt_disk->config_page.Header,
|
|
sizeof(mpt_disk->config_page),
|
|
/*sleep_ok*/TRUE, /*timeout_ms*/5000);
|
|
if (rv != 0)
|
|
mpt_prt(mpt, "mpt_refresh_raid_disk: "
|
|
"Failed to read RAID Disk Page(%d)\n",
|
|
ioc_disk->PhysDiskNum);
|
|
}
|
|
|
|
static void
|
|
mpt_refresh_raid_vol(struct mpt_softc *mpt, struct mpt_raid_volume *mpt_vol,
|
|
CONFIG_PAGE_IOC_2_RAID_VOL *ioc_vol)
|
|
{
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
struct mpt_raid_action_result *ar;
|
|
request_t *req;
|
|
int rv;
|
|
int i;
|
|
|
|
vol_pg = mpt_vol->config_page;
|
|
mpt_vol->flags &= ~MPT_RVF_UP2DATE;
|
|
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_RAID_VOLUME,
|
|
/*PageNumber*/0, ioc_vol->VolumePageNumber,
|
|
&vol_pg->Header, /*sleep_ok*/TRUE,
|
|
/*timeout_ms*/5000);
|
|
if (rv != 0) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_refresh_raid_vol: "
|
|
"Failed to read RAID Vol Hdr(%d)\n",
|
|
ioc_vol->VolumePageNumber);
|
|
return;
|
|
}
|
|
rv = mpt_read_cur_cfg_page(mpt, ioc_vol->VolumePageNumber,
|
|
&vol_pg->Header, mpt->raid_page0_len,
|
|
/*sleep_ok*/TRUE, /*timeout_ms*/5000);
|
|
if (rv != 0) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_refresh_raid_vol: "
|
|
"Failed to read RAID Vol Page(%d)\n",
|
|
ioc_vol->VolumePageNumber);
|
|
return;
|
|
}
|
|
mpt_vol->flags |= MPT_RVF_ACTIVE;
|
|
|
|
/* Update disk entry array data. */
|
|
for (i = 0; i < vol_pg->NumPhysDisks; i++) {
|
|
struct mpt_raid_disk *mpt_disk;
|
|
|
|
mpt_disk = mpt->raid_disks + vol_pg->PhysDisk[i].PhysDiskNum;
|
|
mpt_disk->volume = mpt_vol;
|
|
mpt_disk->member_number = vol_pg->PhysDisk[i].PhysDiskMap;
|
|
if (vol_pg->VolumeType == MPI_RAID_VOL_TYPE_IM)
|
|
mpt_disk->member_number--;
|
|
}
|
|
|
|
if ((vol_pg->VolumeStatus.Flags
|
|
& MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) == 0)
|
|
return;
|
|
|
|
req = mpt_get_request(mpt, /*sleep_ok*/TRUE);
|
|
if (req == NULL) {
|
|
mpt_vol_prt(mpt, mpt_vol,
|
|
"mpt_refresh_raid_vol: Get request failed!\n");
|
|
return;
|
|
}
|
|
rv = mpt_issue_raid_req(mpt, mpt_vol, /*disk*/NULL, req,
|
|
MPI_RAID_ACTION_INDICATOR_STRUCT,
|
|
/*ActionWord*/0, /*addr*/0, /*len*/0,
|
|
/*write*/FALSE, /*wait*/TRUE);
|
|
if (rv == ETIMEDOUT) {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_refresh_raid_vol: "
|
|
"Progress indicator fetch timedout!\n");
|
|
return;
|
|
}
|
|
|
|
ar = REQ_TO_RAID_ACTION_RESULT(req);
|
|
if (rv == 0
|
|
&& ar->action_status == MPI_RAID_ACTION_ASTATUS_SUCCESS
|
|
&& REQ_IOCSTATUS(req) == MPI_IOCSTATUS_SUCCESS) {
|
|
memcpy(&mpt_vol->sync_progress,
|
|
&ar->action_data.indicator_struct,
|
|
sizeof(mpt_vol->sync_progress));
|
|
} else {
|
|
mpt_vol_prt(mpt, mpt_vol, "mpt_refresh_raid_vol: "
|
|
"Progress indicator fetch failed!\n");
|
|
}
|
|
mpt_free_request(mpt, req);
|
|
}
|
|
|
|
/*
|
|
* Update in-core information about RAID support. We update any entries
|
|
* that didn't previously exists or have been marked as needing to
|
|
* be updated by our event handler. Interesting changes are displayed
|
|
* to the console.
|
|
*/
|
|
void
|
|
mpt_refresh_raid_data(struct mpt_softc *mpt)
|
|
{
|
|
CONFIG_PAGE_IOC_2_RAID_VOL *ioc_vol;
|
|
CONFIG_PAGE_IOC_2_RAID_VOL *ioc_last_vol;
|
|
IOC_3_PHYS_DISK *ioc_disk;
|
|
IOC_3_PHYS_DISK *ioc_last_disk;
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
size_t len;
|
|
int rv;
|
|
int i;
|
|
u_int nonopt_volumes;
|
|
|
|
if (mpt->ioc_page2 == NULL || mpt->ioc_page3 == NULL)
|
|
return;
|
|
|
|
/*
|
|
* Mark all items as unreferrened by the configuration.
|
|
* This allows us to find, report, and discard stale
|
|
* entries.
|
|
*/
|
|
for (i = 0; i < mpt->ioc_page2->MaxPhysDisks; i++)
|
|
mpt->raid_disks[i].flags &= ~MPT_RDF_REFERENCED;
|
|
for (i = 0; i < mpt->ioc_page2->MaxVolumes; i++)
|
|
mpt->raid_volumes[i].flags &= ~MPT_RVF_REFERENCED;
|
|
|
|
/*
|
|
* Get Physical Disk information.
|
|
*/
|
|
len = mpt->ioc_page3->Header.PageLength * sizeof(uint32_t);
|
|
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
|
|
&mpt->ioc_page3->Header, len,
|
|
/*sleep_ok*/TRUE, /*timeout_ms*/5000);
|
|
if (rv) {
|
|
mpt_prt(mpt, "mpt_refresh_raid_data: "
|
|
"Failed to read IOC Page 3\n");
|
|
return;
|
|
}
|
|
|
|
ioc_disk = mpt->ioc_page3->PhysDisk;
|
|
ioc_last_disk = ioc_disk + mpt->ioc_page3->NumPhysDisks;
|
|
for (; ioc_disk != ioc_last_disk; ioc_disk++) {
|
|
struct mpt_raid_disk *mpt_disk;
|
|
|
|
mpt_disk = mpt->raid_disks + ioc_disk->PhysDiskNum;
|
|
mpt_disk->flags |= MPT_RDF_REFERENCED;
|
|
if ((mpt_disk->flags & (MPT_RDF_ACTIVE|MPT_RDF_UP2DATE))
|
|
!= (MPT_RDF_ACTIVE|MPT_RDF_UP2DATE)) {
|
|
|
|
mpt_refresh_raid_disk(mpt, mpt_disk, ioc_disk);
|
|
|
|
}
|
|
mpt_disk->flags |= MPT_RDF_ACTIVE;
|
|
mpt->raid_rescan++;
|
|
}
|
|
|
|
/*
|
|
* Refresh volume data.
|
|
*/
|
|
len = mpt->ioc_page2->Header.PageLength * sizeof(uint32_t);
|
|
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
|
|
&mpt->ioc_page2->Header, len,
|
|
/*sleep_ok*/TRUE, /*timeout_ms*/5000);
|
|
if (rv) {
|
|
mpt_prt(mpt, "mpt_refresh_raid_data: "
|
|
"Failed to read IOC Page 2\n");
|
|
return;
|
|
}
|
|
|
|
ioc_vol = mpt->ioc_page2->RaidVolume;
|
|
ioc_last_vol = ioc_vol + mpt->ioc_page2->NumActiveVolumes;
|
|
for (;ioc_vol != ioc_last_vol; ioc_vol++) {
|
|
struct mpt_raid_volume *mpt_vol;
|
|
|
|
mpt_vol = mpt->raid_volumes + ioc_vol->VolumePageNumber;
|
|
mpt_vol->flags |= MPT_RVF_REFERENCED;
|
|
vol_pg = mpt_vol->config_page;
|
|
if (vol_pg == NULL)
|
|
continue;
|
|
if (((mpt_vol->flags & (MPT_RVF_ACTIVE|MPT_RVF_UP2DATE))
|
|
!= (MPT_RVF_ACTIVE|MPT_RVF_UP2DATE))
|
|
|| (vol_pg->VolumeStatus.Flags
|
|
& MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) != 0) {
|
|
|
|
mpt_refresh_raid_vol(mpt, mpt_vol, ioc_vol);
|
|
}
|
|
mpt_vol->flags |= MPT_RVF_ACTIVE;
|
|
}
|
|
|
|
nonopt_volumes = 0;
|
|
for (i = 0; i < mpt->ioc_page2->MaxVolumes; i++) {
|
|
struct mpt_raid_volume *mpt_vol;
|
|
uint64_t total;
|
|
uint64_t left;
|
|
int m;
|
|
u_int prio;
|
|
|
|
mpt_vol = &mpt->raid_volumes[i];
|
|
|
|
if ((mpt_vol->flags & MPT_RVF_ACTIVE) == 0)
|
|
continue;
|
|
|
|
vol_pg = mpt_vol->config_page;
|
|
if ((mpt_vol->flags & (MPT_RVF_REFERENCED|MPT_RVF_ANNOUNCED))
|
|
== MPT_RVF_ANNOUNCED) {
|
|
mpt_vol_prt(mpt, mpt_vol, "No longer configured\n");
|
|
mpt_vol->flags = 0;
|
|
continue;
|
|
}
|
|
|
|
if ((mpt_vol->flags & MPT_RVF_ANNOUNCED) == 0) {
|
|
|
|
mpt_announce_vol(mpt, mpt_vol);
|
|
mpt_vol->flags |= MPT_RVF_ANNOUNCED;
|
|
}
|
|
|
|
if (vol_pg->VolumeStatus.State !=
|
|
MPI_RAIDVOL0_STATUS_STATE_OPTIMAL)
|
|
nonopt_volumes++;
|
|
|
|
if ((mpt_vol->flags & MPT_RVF_UP2DATE) != 0)
|
|
continue;
|
|
|
|
mpt_vol->flags |= MPT_RVF_UP2DATE;
|
|
mpt_vol_prt(mpt, mpt_vol, "%s - %s\n",
|
|
mpt_vol_type(mpt_vol), mpt_vol_state(mpt_vol));
|
|
mpt_verify_mwce(mpt, mpt_vol);
|
|
|
|
if (vol_pg->VolumeStatus.Flags == 0)
|
|
continue;
|
|
|
|
mpt_vol_prt(mpt, mpt_vol, "Status (");
|
|
for (m = 1; m <= 0x80; m <<= 1) {
|
|
switch (vol_pg->VolumeStatus.Flags & m) {
|
|
case MPI_RAIDVOL0_STATUS_FLAG_ENABLED:
|
|
mpt_prtc(mpt, " Enabled");
|
|
break;
|
|
case MPI_RAIDVOL0_STATUS_FLAG_QUIESCED:
|
|
mpt_prtc(mpt, " Quiesced");
|
|
break;
|
|
case MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS:
|
|
mpt_prtc(mpt, " Re-Syncing");
|
|
break;
|
|
case MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE:
|
|
mpt_prtc(mpt, " Inactive");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
mpt_prtc(mpt, " )\n");
|
|
|
|
if ((vol_pg->VolumeStatus.Flags
|
|
& MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) == 0)
|
|
continue;
|
|
|
|
mpt_verify_resync_rate(mpt, mpt_vol);
|
|
|
|
left = u64toh(mpt_vol->sync_progress.BlocksRemaining);
|
|
total = u64toh(mpt_vol->sync_progress.TotalBlocks);
|
|
if (vol_pg->ResyncRate != 0) {
|
|
|
|
prio = ((u_int)vol_pg->ResyncRate * 100000) / 0xFF;
|
|
mpt_vol_prt(mpt, mpt_vol, "Rate %d.%d%%\n",
|
|
prio / 1000, prio % 1000);
|
|
} else {
|
|
prio = vol_pg->VolumeSettings.Settings
|
|
& MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC;
|
|
mpt_vol_prt(mpt, mpt_vol, "%s Priority Re-Sync\n",
|
|
prio ? "High" : "Low");
|
|
}
|
|
mpt_vol_prt(mpt, mpt_vol, "%ju of %ju "
|
|
"blocks remaining\n", (uintmax_t)left,
|
|
(uintmax_t)total);
|
|
|
|
/* Periodically report on sync progress. */
|
|
mpt_schedule_raid_refresh(mpt);
|
|
}
|
|
|
|
for (i = 0; i < mpt->ioc_page2->MaxPhysDisks; i++) {
|
|
struct mpt_raid_disk *mpt_disk;
|
|
CONFIG_PAGE_RAID_PHYS_DISK_0 *disk_pg;
|
|
int m;
|
|
|
|
mpt_disk = &mpt->raid_disks[i];
|
|
disk_pg = &mpt_disk->config_page;
|
|
|
|
if ((mpt_disk->flags & MPT_RDF_ACTIVE) == 0)
|
|
continue;
|
|
|
|
if ((mpt_disk->flags & (MPT_RDF_REFERENCED|MPT_RDF_ANNOUNCED))
|
|
== MPT_RDF_ANNOUNCED) {
|
|
mpt_disk_prt(mpt, mpt_disk, "No longer configured\n");
|
|
mpt_disk->flags = 0;
|
|
mpt->raid_rescan++;
|
|
continue;
|
|
}
|
|
|
|
if ((mpt_disk->flags & MPT_RDF_ANNOUNCED) == 0) {
|
|
|
|
mpt_announce_disk(mpt, mpt_disk);
|
|
mpt_disk->flags |= MPT_RVF_ANNOUNCED;
|
|
}
|
|
|
|
if ((mpt_disk->flags & MPT_RDF_UP2DATE) != 0)
|
|
continue;
|
|
|
|
mpt_disk->flags |= MPT_RDF_UP2DATE;
|
|
mpt_disk_prt(mpt, mpt_disk, "%s\n", mpt_disk_state(mpt_disk));
|
|
if (disk_pg->PhysDiskStatus.Flags == 0)
|
|
continue;
|
|
|
|
mpt_disk_prt(mpt, mpt_disk, "Status (");
|
|
for (m = 1; m <= 0x80; m <<= 1) {
|
|
switch (disk_pg->PhysDiskStatus.Flags & m) {
|
|
case MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC:
|
|
mpt_prtc(mpt, " Out-Of-Sync");
|
|
break;
|
|
case MPI_PHYSDISK0_STATUS_FLAG_QUIESCED:
|
|
mpt_prtc(mpt, " Quiesced");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
mpt_prtc(mpt, " )\n");
|
|
}
|
|
|
|
mpt->raid_nonopt_volumes = nonopt_volumes;
|
|
}
|
|
|
|
static void
|
|
mpt_raid_timer(void *arg)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
|
|
mpt = (struct mpt_softc *)arg;
|
|
MPT_LOCK(mpt);
|
|
mpt_raid_wakeup(mpt);
|
|
MPT_UNLOCK(mpt);
|
|
}
|
|
|
|
static void
|
|
mpt_raid_quiesce_timeout(void *arg)
|
|
{
|
|
/* Complete the CCB with error */
|
|
/* COWWWW */
|
|
}
|
|
|
|
void
|
|
mpt_schedule_raid_refresh(struct mpt_softc *mpt)
|
|
{
|
|
callout_reset(&mpt->raid_timer, MPT_RAID_SYNC_REPORT_INTERVAL,
|
|
mpt_raid_timer, mpt);
|
|
}
|
|
|
|
static int
|
|
mpt_raid_set_vol_resync_rate(struct mpt_softc *mpt, u_int rate)
|
|
{
|
|
struct mpt_raid_volume *mpt_vol;
|
|
|
|
if ((rate > MPT_RAID_RESYNC_RATE_MAX
|
|
|| rate < MPT_RAID_RESYNC_RATE_MIN)
|
|
&& rate != MPT_RAID_RESYNC_RATE_NC)
|
|
return (EINVAL);
|
|
|
|
MPT_LOCK(mpt);
|
|
mpt->raid_resync_rate = rate;
|
|
RAID_VOL_FOREACH(mpt, mpt_vol) {
|
|
if ((mpt_vol->flags & MPT_RVF_ACTIVE) == 0)
|
|
continue;
|
|
mpt_verify_resync_rate(mpt, mpt_vol);
|
|
}
|
|
MPT_UNLOCK(mpt);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mpt_raid_set_vol_queue_depth(struct mpt_softc *mpt, u_int vol_queue_depth)
|
|
{
|
|
struct mpt_raid_volume *mpt_vol;
|
|
|
|
if (vol_queue_depth > 255
|
|
|| vol_queue_depth < 1)
|
|
return (EINVAL);
|
|
|
|
MPT_LOCK(mpt);
|
|
mpt->raid_queue_depth = vol_queue_depth;
|
|
RAID_VOL_FOREACH(mpt, mpt_vol) {
|
|
struct cam_path *path;
|
|
int error;
|
|
|
|
if ((mpt_vol->flags & MPT_RVF_ACTIVE) == 0)
|
|
continue;
|
|
|
|
mpt->raid_rescan = 0;
|
|
|
|
error = xpt_create_path(&path, xpt_periph,
|
|
cam_sim_path(mpt->sim),
|
|
mpt_vol->config_page->VolumeID,
|
|
/*lun*/0);
|
|
if (error != CAM_REQ_CMP) {
|
|
mpt_vol_prt(mpt, mpt_vol, "Unable to allocate path!\n");
|
|
continue;
|
|
}
|
|
mpt_adjust_queue_depth(mpt, mpt_vol, path);
|
|
xpt_free_path(path);
|
|
}
|
|
MPT_UNLOCK(mpt);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mpt_raid_set_vol_mwce(struct mpt_softc *mpt, mpt_raid_mwce_t mwce)
|
|
{
|
|
struct mpt_raid_volume *mpt_vol;
|
|
int force_full_resync;
|
|
|
|
MPT_LOCK(mpt);
|
|
if (mwce == mpt->raid_mwce_setting) {
|
|
MPT_UNLOCK(mpt);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Catch MWCE being left on due to a failed shutdown. Since
|
|
* sysctls cannot be set by the loader, we treat the first
|
|
* setting of this varible specially and force a full volume
|
|
* resync if MWCE is enabled and a resync is in progress.
|
|
*/
|
|
force_full_resync = 0;
|
|
if (mpt->raid_mwce_set == 0
|
|
&& mpt->raid_mwce_setting == MPT_RAID_MWCE_NC
|
|
&& mwce == MPT_RAID_MWCE_REBUILD_ONLY)
|
|
force_full_resync = 1;
|
|
|
|
mpt->raid_mwce_setting = mwce;
|
|
RAID_VOL_FOREACH(mpt, mpt_vol) {
|
|
CONFIG_PAGE_RAID_VOL_0 *vol_pg;
|
|
int resyncing;
|
|
int mwce;
|
|
|
|
if ((mpt_vol->flags & MPT_RVF_ACTIVE) == 0)
|
|
continue;
|
|
|
|
vol_pg = mpt_vol->config_page;
|
|
resyncing = vol_pg->VolumeStatus.Flags
|
|
& MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS;
|
|
mwce = vol_pg->VolumeSettings.Settings
|
|
& MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE;
|
|
if (force_full_resync && resyncing && mwce) {
|
|
|
|
/*
|
|
* XXX disable/enable volume should force a resync,
|
|
* but we'll need to queice, drain, and restart
|
|
* I/O to do that.
|
|
*/
|
|
mpt_vol_prt(mpt, mpt_vol, "WARNING - Unsafe shutdown "
|
|
"detected. Suggest full resync.\n");
|
|
}
|
|
mpt_verify_mwce(mpt, mpt_vol);
|
|
}
|
|
mpt->raid_mwce_set = 1;
|
|
MPT_UNLOCK(mpt);
|
|
return (0);
|
|
}
|
|
|
|
const char *mpt_vol_mwce_strs[] =
|
|
{
|
|
"On",
|
|
"Off",
|
|
"On-During-Rebuild",
|
|
"NC"
|
|
};
|
|
|
|
static int
|
|
mpt_raid_sysctl_vol_member_wce(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
char inbuf[20];
|
|
struct mpt_softc *mpt;
|
|
const char *str;
|
|
int error;
|
|
u_int size;
|
|
u_int i;
|
|
|
|
GIANT_REQUIRED;
|
|
mpt = (struct mpt_softc *)arg1;
|
|
str = mpt_vol_mwce_strs[mpt->raid_mwce_setting];
|
|
error = SYSCTL_OUT(req, str, strlen(str) + 1);
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
size = req->newlen - req->newidx;
|
|
if (size >= sizeof(inbuf))
|
|
return (EINVAL);
|
|
|
|
error = SYSCTL_IN(req, inbuf, size);
|
|
if (error)
|
|
return (error);
|
|
inbuf[size] = '\0';
|
|
for (i = 0; i < NUM_ELEMENTS(mpt_vol_mwce_strs); i++) {
|
|
|
|
if (strcmp(mpt_vol_mwce_strs[i], inbuf) == 0)
|
|
return (mpt_raid_set_vol_mwce(mpt, i));
|
|
}
|
|
return (EINVAL);
|
|
}
|
|
|
|
static int
|
|
mpt_raid_sysctl_vol_resync_rate(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
u_int raid_resync_rate;
|
|
int error;
|
|
|
|
GIANT_REQUIRED;
|
|
mpt = (struct mpt_softc *)arg1;
|
|
raid_resync_rate = mpt->raid_resync_rate;
|
|
|
|
error = sysctl_handle_int(oidp, &raid_resync_rate, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
|
|
return (mpt_raid_set_vol_resync_rate(mpt, raid_resync_rate));
|
|
}
|
|
|
|
static int
|
|
mpt_raid_sysctl_vol_queue_depth(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
u_int raid_queue_depth;
|
|
int error;
|
|
|
|
GIANT_REQUIRED;
|
|
mpt = (struct mpt_softc *)arg1;
|
|
raid_queue_depth = mpt->raid_queue_depth;
|
|
|
|
error = sysctl_handle_int(oidp, &raid_queue_depth, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
|
|
return (mpt_raid_set_vol_queue_depth(mpt, raid_queue_depth));
|
|
}
|
|
|
|
static void
|
|
mpt_raid_sysctl_attach(struct mpt_softc *mpt)
|
|
{
|
|
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(mpt->dev);
|
|
struct sysctl_oid *tree = device_get_sysctl_tree(mpt->dev);
|
|
|
|
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"vol_member_wce", CTLTYPE_STRING | CTLFLAG_RW, mpt, 0,
|
|
mpt_raid_sysctl_vol_member_wce, "A",
|
|
"volume member WCE(On,Off,On-During-Rebuild,NC)");
|
|
|
|
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"vol_queue_depth", CTLTYPE_INT | CTLFLAG_RW, mpt, 0,
|
|
mpt_raid_sysctl_vol_queue_depth, "I",
|
|
"default volume queue depth");
|
|
|
|
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"vol_resync_rate", CTLTYPE_INT | CTLFLAG_RW, mpt, 0,
|
|
mpt_raid_sysctl_vol_resync_rate, "I",
|
|
"volume resync priority (0 == NC, 1 - 255)");
|
|
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"nonoptimal_volumes", CTLFLAG_RD,
|
|
&mpt->raid_nonopt_volumes, 0,
|
|
"number of nonoptimal volumes");
|
|
}
|