853 lines
20 KiB
C
853 lines
20 KiB
C
/*
|
|
* refclock_true - clock driver for the Kinemetrics Truetime receivers
|
|
* Receiver Version 3.0C - tested plain, with CLKLDISC
|
|
* Developement work being done:
|
|
* - Properly handle varying satellite positions (more acurately)
|
|
* - Integrate GPSTM and/or OMEGA and/or TRAK and/or ??? drivers
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include <config.h>
|
|
#endif
|
|
|
|
#if defined(REFCLOCK) && defined(CLOCK_TRUETIME)
|
|
|
|
#include <stdio.h>
|
|
#include <ctype.h>
|
|
#include <sys/time.h>
|
|
|
|
#include "ntpd.h"
|
|
#include "ntp_io.h"
|
|
#include "ntp_refclock.h"
|
|
#include "ntp_unixtime.h"
|
|
#include "ntp_stdlib.h"
|
|
|
|
/* This should be an atom clock but those are very hard to build.
|
|
*
|
|
* The PCL720 from P C Labs has an Intel 8253 lookalike, as well as a bunch
|
|
* of TTL input and output pins, all brought out to the back panel. If you
|
|
* wire a PPS signal (such as the TTL PPS coming out of a GOES or other
|
|
* Kinemetrics/Truetime clock) to the 8253's GATE0, and then also wire the
|
|
* 8253's OUT0 to the PCL720's INPUT3.BIT0, then we can read CTR0 to get the
|
|
* number of uSecs since the last PPS upward swing, mediated by reading OUT0
|
|
* to find out if the counter has wrapped around (this happens if more than
|
|
* 65535us (65ms) elapses between the PPS event and our being called.)
|
|
*/
|
|
#ifdef CLOCK_PPS720
|
|
# undef min /* XXX */
|
|
# undef max /* XXX */
|
|
# include <machine/inline.h>
|
|
# include <sys/pcl720.h>
|
|
# include <sys/i8253.h>
|
|
# define PCL720_IOB 0x2a0 /* XXX */
|
|
# define PCL720_CTR 0 /* XXX */
|
|
#endif
|
|
|
|
/*
|
|
* Support for Kinemetrics Truetime Receivers
|
|
* GOES
|
|
* GPS/TM-TMD
|
|
* XL-DC (a 151-602-210, reported by the driver as a GPS/TM-TMD)
|
|
* GPS-800 TCU (an 805-957 with the RS232 Talker/Listener module)
|
|
* OM-DC: getting stale ("OMEGA")
|
|
*
|
|
* Most of this code is originally from refclock_wwvb.c with thanks.
|
|
* It has been so mangled that wwvb is not a recognizable ancestor.
|
|
*
|
|
* Timcode format: ADDD:HH:MM:SSQCL
|
|
* A - control A (this is stripped before we see it)
|
|
* Q - Quality indication (see below)
|
|
* C - Carriage return
|
|
* L - Line feed
|
|
*
|
|
* Quality codes indicate possible error of
|
|
* 468-DC GOES Receiver:
|
|
* GPS-TM/TMD Receiver:
|
|
* ? +/- 500 milliseconds # +/- 50 milliseconds
|
|
* * +/- 5 milliseconds . +/- 1 millisecond
|
|
* space less than 1 millisecond
|
|
* OM-DC OMEGA Receiver:
|
|
* > >+- 5 seconds
|
|
* ? >+/- 500 milliseconds # >+/- 50 milliseconds
|
|
* * >+/- 5 milliseconds . >+/- 1 millisecond
|
|
* A-H less than 1 millisecond. Character indicates which station
|
|
* is being received as follows:
|
|
* A = Norway, B = Liberia, C = Hawaii, D = North Dakota,
|
|
* E = La Reunion, F = Argentina, G = Australia, H = Japan.
|
|
*
|
|
* The carriage return start bit begins on 0 seconds and extends to 1 bit time.
|
|
*
|
|
* Notes on 468-DC and OMEGA receiver:
|
|
*
|
|
* Send the clock a 'R' or 'C' and once per second a timestamp will
|
|
* appear. Send a 'P' to get the satellite position once (GOES only.)
|
|
*
|
|
* Notes on the 468-DC receiver:
|
|
*
|
|
* Since the old east/west satellite locations are only historical, you can't
|
|
* set your clock propagation delay settings correctly and still use
|
|
* automatic mode. The manual says to use a compromise when setting the
|
|
* switches. This results in significant errors. The solution; use fudge
|
|
* time1 and time2 to incorporate corrections. If your clock is set for
|
|
* 50 and it should be 58 for using the west and 46 for using the east,
|
|
* use the line
|
|
*
|
|
* fudge 127.127.5.0 time1 +0.008 time2 -0.004
|
|
*
|
|
* This corrects the 4 milliseconds advance and 8 milliseconds retard
|
|
* needed. The software will ask the clock which satellite it sees.
|
|
*
|
|
* Ntp.conf parameters:
|
|
* time1 - offset applied to samples when reading WEST satellite (default = 0)
|
|
* time2 - offset applied to samples when reading EAST satellite (default = 0)
|
|
* val1 - stratum to assign to this clock (default = 0)
|
|
* val2 - refid assigned to this clock (default = "TRUE", see below)
|
|
* flag1 - will silence the clock side of ntpd, just reading the clock
|
|
* without trying to write to it. (default = 0)
|
|
* flag2 - generate a debug file /tmp/true%d.
|
|
* flag3 - enable ppsclock streams module
|
|
* flag4 - use the PCL-720 (BSD/OS only)
|
|
*/
|
|
|
|
/*
|
|
* Definitions
|
|
*/
|
|
#define DEVICE "/dev/true%d"
|
|
#define SPEED232 B9600 /* 9600 baud */
|
|
|
|
/*
|
|
* Radio interface parameters
|
|
*/
|
|
#define PRECISION (-10) /* precision assumed (about 1 ms) */
|
|
#define REFID "TRUE" /* reference id */
|
|
#define DESCRIPTION "Kinemetrics/TrueTime Receiver"
|
|
|
|
/*
|
|
* Tags which station (satellite) we see
|
|
*/
|
|
#define GOES_WEST 0 /* Default to WEST satellite and apply time1 */
|
|
#define GOES_EAST 1 /* until you discover otherwise */
|
|
|
|
/*
|
|
* used by the state machine
|
|
*/
|
|
enum true_event {e_Init, e_Huh, e_F18, e_F50, e_F51, e_Satellite,
|
|
e_Poll, e_Location, e_TS, e_Max};
|
|
const char *events[] = {"Init", "Huh", "F18", "F50", "F51", "Satellite",
|
|
"Poll", "Location", "TS"};
|
|
#define eventStr(x) (((int)x<(int)e_Max) ? events[(int)x] : "?")
|
|
|
|
enum true_state {s_Base, s_InqTM, s_InqTCU, s_InqOmega, s_InqGOES,
|
|
s_Init, s_F18, s_F50, s_Start, s_Auto, s_Max};
|
|
const char *states[] = {"Base", "InqTM", "InqTCU", "InqOmega", "InqGOES",
|
|
"Init", "F18", "F50", "Start", "Auto"};
|
|
#define stateStr(x) (((int)x<(int)s_Max) ? states[(int)x] : "?")
|
|
|
|
enum true_type {t_unknown, t_goes, t_tm, t_tcu, t_omega, t_Max};
|
|
const char *types[] = {"unknown", "goes", "tm", "tcu", "omega"};
|
|
#define typeStr(x) (((int)x<(int)t_Max) ? types[(int)x] : "?")
|
|
|
|
/*
|
|
* unit control structure
|
|
*/
|
|
struct true_unit {
|
|
unsigned int pollcnt; /* poll message counter */
|
|
unsigned int station; /* which station we are on */
|
|
unsigned int polled; /* Hand in a time sample? */
|
|
enum true_state state; /* state machine */
|
|
enum true_type type; /* what kind of clock is it? */
|
|
int unit; /* save an extra copy of this */
|
|
FILE *debug; /* debug logging file */
|
|
#ifdef CLOCK_PPS720
|
|
int pcl720init; /* init flag for PCL 720 */
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* Function prototypes
|
|
*/
|
|
static int true_start P((int, struct peer *));
|
|
static void true_shutdown P((int, struct peer *));
|
|
static void true_receive P((struct recvbuf *));
|
|
static void true_poll P((int, struct peer *));
|
|
static void true_send P((struct peer *, const char *));
|
|
static void true_doevent P((struct peer *, enum true_event));
|
|
|
|
#ifdef CLOCK_PPS720
|
|
static u_long true_sample720 P((void));
|
|
#endif
|
|
|
|
/*
|
|
* Transfer vector
|
|
*/
|
|
struct refclock refclock_true = {
|
|
true_start, /* start up driver */
|
|
true_shutdown, /* shut down driver */
|
|
true_poll, /* transmit poll message */
|
|
noentry, /* not used (old true_control) */
|
|
noentry, /* initialize driver (not used) */
|
|
noentry, /* not used (old true_buginfo) */
|
|
NOFLAGS /* not used */
|
|
};
|
|
|
|
|
|
#if !defined(__STDC__)
|
|
# define true_debug (void)
|
|
#else
|
|
static void
|
|
true_debug(struct peer *peer, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
int want_debugging, now_debugging;
|
|
struct refclockproc *pp;
|
|
struct true_unit *up;
|
|
|
|
va_start(ap, fmt);
|
|
pp = peer->procptr;
|
|
up = (struct true_unit *)pp->unitptr;
|
|
|
|
want_debugging = (pp->sloppyclockflag & CLK_FLAG2) != 0;
|
|
now_debugging = (up->debug != NULL);
|
|
if (want_debugging != now_debugging)
|
|
{
|
|
if (want_debugging) {
|
|
char filename[20];
|
|
|
|
sprintf(filename, "/tmp/true%d.debug", up->unit);
|
|
up->debug = fopen(filename, "w");
|
|
if (up->debug) {
|
|
#ifdef HAVE_SETVBUF
|
|
static char buf[BUFSIZ];
|
|
setvbuf(up->debug, buf, _IOLBF, BUFSIZ);
|
|
#else
|
|
setlinebuf(up->debug);
|
|
#endif
|
|
}
|
|
} else {
|
|
fclose(up->debug);
|
|
up->debug = NULL;
|
|
}
|
|
}
|
|
|
|
if (up->debug) {
|
|
fprintf(up->debug, "true%d: ", up->unit);
|
|
vfprintf(up->debug, fmt, ap);
|
|
}
|
|
}
|
|
#endif /*STDC*/
|
|
|
|
/*
|
|
* true_start - open the devices and initialize data for processing
|
|
*/
|
|
static int
|
|
true_start(
|
|
int unit,
|
|
struct peer *peer
|
|
)
|
|
{
|
|
register struct true_unit *up;
|
|
struct refclockproc *pp;
|
|
char device[20];
|
|
int fd;
|
|
|
|
/*
|
|
* Open serial port
|
|
*/
|
|
(void)sprintf(device, DEVICE, unit);
|
|
if (!(fd = refclock_open(device, SPEED232, LDISC_CLK)))
|
|
return (0);
|
|
|
|
/*
|
|
* Allocate and initialize unit structure
|
|
*/
|
|
if (!(up = (struct true_unit *)
|
|
emalloc(sizeof(struct true_unit)))) {
|
|
(void) close(fd);
|
|
return (0);
|
|
}
|
|
memset((char *)up, 0, sizeof(struct true_unit));
|
|
pp = peer->procptr;
|
|
pp->io.clock_recv = true_receive;
|
|
pp->io.srcclock = (caddr_t)peer;
|
|
pp->io.datalen = 0;
|
|
pp->io.fd = fd;
|
|
if (!io_addclock(&pp->io)) {
|
|
(void) close(fd);
|
|
free(up);
|
|
return (0);
|
|
}
|
|
pp->unitptr = (caddr_t)up;
|
|
|
|
/*
|
|
* Initialize miscellaneous variables
|
|
*/
|
|
peer->precision = PRECISION;
|
|
pp->clockdesc = DESCRIPTION;
|
|
memcpy((char *)&pp->refid, REFID, 4);
|
|
up->pollcnt = 2;
|
|
up->type = t_unknown;
|
|
up->state = s_Base;
|
|
true_doevent(peer, e_Init);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* true_shutdown - shut down the clock
|
|
*/
|
|
static void
|
|
true_shutdown(
|
|
int unit,
|
|
struct peer *peer
|
|
)
|
|
{
|
|
register struct true_unit *up;
|
|
struct refclockproc *pp;
|
|
|
|
pp = peer->procptr;
|
|
up = (struct true_unit *)pp->unitptr;
|
|
io_closeclock(&pp->io);
|
|
free(up);
|
|
}
|
|
|
|
|
|
/*
|
|
* true_receive - receive data from the serial interface on a clock
|
|
*/
|
|
static void
|
|
true_receive(
|
|
struct recvbuf *rbufp
|
|
)
|
|
{
|
|
register struct true_unit *up;
|
|
struct refclockproc *pp;
|
|
struct peer *peer;
|
|
u_short new_station;
|
|
char synced;
|
|
int i;
|
|
int lat, lon, off; /* GOES Satellite position */
|
|
|
|
/*
|
|
* Get the clock this applies to and pointers to the data.
|
|
*/
|
|
peer = (struct peer *)rbufp->recv_srcclock;
|
|
pp = peer->procptr;
|
|
up = (struct true_unit *)pp->unitptr;
|
|
|
|
/*
|
|
* Read clock output. Automatically handles STREAMS, CLKLDISC.
|
|
*/
|
|
pp->lencode = refclock_gtlin(rbufp, pp->a_lastcode, BMAX, &pp->lastrec);
|
|
|
|
/*
|
|
* There is a case where <cr><lf> generates 2 timestamps.
|
|
*/
|
|
if (pp->lencode == 0)
|
|
return;
|
|
pp->a_lastcode[pp->lencode] = '\0';
|
|
true_debug(peer, "receive(%s) [%d]\n", pp->a_lastcode, pp->lencode);
|
|
|
|
up->pollcnt = 2;
|
|
record_clock_stats(&peer->srcadr, pp->a_lastcode);
|
|
|
|
/*
|
|
* We get down to business, check the timecode format and decode
|
|
* its contents. This code decodes a multitude of different
|
|
* clock messages. Timecodes are processed if needed. All replies
|
|
* will be run through the state machine to tweak driver options
|
|
* and program the clock.
|
|
*/
|
|
|
|
/*
|
|
* Clock misunderstood our last command?
|
|
*/
|
|
if (pp->a_lastcode[0] == '?') {
|
|
true_doevent(peer, e_Huh);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Timecode: "nnnnn+nnn-nnn"
|
|
* (from GOES clock when asked about satellite position)
|
|
*/
|
|
if ((pp->a_lastcode[5] == '+' || pp->a_lastcode[5] == '-') &&
|
|
(pp->a_lastcode[9] == '+' || pp->a_lastcode[9] == '-') &&
|
|
sscanf(pp->a_lastcode, "%5d%*c%3d%*c%3d", &lon, &lat, &off) == 3
|
|
) {
|
|
const char *label = "Botch!";
|
|
|
|
/*
|
|
* This is less than perfect. Call the (satellite)
|
|
* either EAST or WEST and adjust slop accodingly
|
|
* Perfectionists would recalculate the exact delay
|
|
* and adjust accordingly...
|
|
*/
|
|
if (lon > 7000 && lon < 14000) {
|
|
if (lon < 10000) {
|
|
new_station = GOES_EAST;
|
|
label = "EAST";
|
|
} else {
|
|
new_station = GOES_WEST;
|
|
label = "WEST";
|
|
}
|
|
|
|
if (new_station != up->station) {
|
|
double dtemp;
|
|
|
|
dtemp = pp->fudgetime1;
|
|
pp->fudgetime1 = pp->fudgetime2;
|
|
pp->fudgetime2 = dtemp;
|
|
up->station = new_station;
|
|
}
|
|
}
|
|
else {
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
label = "UNKNOWN";
|
|
}
|
|
true_debug(peer, "GOES: station %s\n", label);
|
|
true_doevent(peer, e_Satellite);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Timecode: "Fnn"
|
|
* (from TM/TMD clock when it wants to tell us what it's up to.)
|
|
*/
|
|
if (sscanf(pp->a_lastcode, "F%2d", &i) == 1 && i > 0 && i < 80) {
|
|
switch (i) {
|
|
case 50:
|
|
true_doevent(peer, e_F50);
|
|
break;
|
|
case 51:
|
|
true_doevent(peer, e_F51);
|
|
break;
|
|
default:
|
|
true_debug(peer, "got F%02d - ignoring\n", i);
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Timecode: " TRUETIME Mk III"
|
|
* (from a TM/TMD clock during initialization.)
|
|
*/
|
|
if (strcmp(pp->a_lastcode, " TRUETIME Mk III") == 0) {
|
|
true_doevent(peer, e_F18);
|
|
NLOG(NLOG_CLOCKSTATUS) {
|
|
msyslog(LOG_INFO, "TM/TMD: %s", pp->a_lastcode);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Timecode: "N03726428W12209421+000033"
|
|
* 1 2
|
|
* 0123456789012345678901234
|
|
* (from a TCU during initialization)
|
|
*/
|
|
if ((pp->a_lastcode[0] == 'N' || pp->a_lastcode[0] == 'S') &&
|
|
(pp->a_lastcode[9] == 'W' || pp->a_lastcode[9] == 'E') &&
|
|
pp->a_lastcode[18] == '+') {
|
|
true_doevent(peer, e_Location);
|
|
NLOG(NLOG_CLOCKSTATUS) {
|
|
msyslog(LOG_INFO, "TCU-800: %s", pp->a_lastcode);
|
|
}
|
|
return;
|
|
}
|
|
/*
|
|
* Timecode: "ddd:hh:mm:ssQ"
|
|
* (from all clocks supported by this driver.)
|
|
*/
|
|
if (pp->a_lastcode[3] == ':' &&
|
|
pp->a_lastcode[6] == ':' &&
|
|
pp->a_lastcode[9] == ':' &&
|
|
sscanf(pp->a_lastcode, "%3d:%2d:%2d:%2d%c",
|
|
&pp->day, &pp->hour, &pp->minute,
|
|
&pp->second, &synced) == 5) {
|
|
|
|
/*
|
|
* Adjust the synchronize indicator according to timecode
|
|
*/
|
|
if (synced != ' ' && synced != '.' && synced != '*')
|
|
pp->leap = LEAP_NOTINSYNC;
|
|
|
|
true_doevent(peer, e_TS);
|
|
|
|
#ifdef CLOCK_PPS720
|
|
/* If it's taken more than 65ms to get here, we'll lose. */
|
|
if ((pp->sloppyclockflag & CLK_FLAG4) && up->pcl720init) {
|
|
l_fp off;
|
|
|
|
#ifdef CLOCK_ATOM
|
|
/*
|
|
* find out what time it really is. Include
|
|
* the count from the PCL720
|
|
*/
|
|
if (!clocktime(pp->day, pp->hour, pp->minute,
|
|
pp->second, GMT, pp->lastrec.l_ui,
|
|
&pp->yearstart, &off.l_ui)) {
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
pp->usec = true_sample720();
|
|
#ifdef CLOCK_ATOM
|
|
TVUTOTSF(pp->usec, off.l_uf);
|
|
#endif
|
|
|
|
/*
|
|
* Stomp all over the timestamp that was pulled out
|
|
* of the input stream. It's irrelevant since we've
|
|
* adjusted the input time to reflect now (via pp->usec)
|
|
* rather than when the data was collected.
|
|
*/
|
|
get_systime(&pp->lastrec);
|
|
#ifdef CLOCK_ATOM
|
|
/*
|
|
* Create a true offset for feeding to pps_sample()
|
|
*/
|
|
L_SUB(&off, &pp->lastrec);
|
|
|
|
pps_sample(peer, &off);
|
|
#endif
|
|
true_debug(peer, "true_sample720: %luus\n", pp->usec);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* The clock will blurt a timecode every second but we only
|
|
* want one when polled. If we havn't been polled, bail out.
|
|
*/
|
|
if (!up->polled)
|
|
return;
|
|
|
|
true_doevent(peer, e_Poll);
|
|
if (!refclock_process(pp)) {
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
return;
|
|
}
|
|
refclock_receive(peer);
|
|
|
|
/*
|
|
* We have succedded in answering the poll.
|
|
* Turn off the flag and return
|
|
*/
|
|
up->polled = 0;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* No match to known timecodes, report failure and return
|
|
*/
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* true_send - time to send the clock a signal to cough up a time sample
|
|
*/
|
|
static void
|
|
true_send(
|
|
struct peer *peer,
|
|
const char *cmd
|
|
)
|
|
{
|
|
struct refclockproc *pp;
|
|
|
|
pp = peer->procptr;
|
|
if (!(pp->sloppyclockflag & CLK_FLAG1)) {
|
|
register int len = strlen(cmd);
|
|
|
|
true_debug(peer, "Send '%s'\n", cmd);
|
|
if (write(pp->io.fd, cmd, (unsigned)len) != len)
|
|
refclock_report(peer, CEVNT_FAULT);
|
|
else
|
|
pp->polls++;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* state machine for initializing and controlling a clock
|
|
*/
|
|
static void
|
|
true_doevent(
|
|
struct peer *peer,
|
|
enum true_event event
|
|
)
|
|
{
|
|
struct true_unit *up;
|
|
struct refclockproc *pp;
|
|
|
|
pp = peer->procptr;
|
|
up = (struct true_unit *)pp->unitptr;
|
|
if (event != e_TS) {
|
|
NLOG(NLOG_CLOCKSTATUS) {
|
|
msyslog(LOG_INFO, "TRUE: clock %s, state %s, event %s",
|
|
typeStr(up->type),
|
|
stateStr(up->state),
|
|
eventStr(event));
|
|
}
|
|
}
|
|
true_debug(peer, "clock %s, state %s, event %s\n",
|
|
typeStr(up->type), stateStr(up->state), eventStr(event));
|
|
switch (up->type) {
|
|
case t_goes:
|
|
switch (event) {
|
|
case e_Init: /* FALLTHROUGH */
|
|
case e_Satellite:
|
|
/*
|
|
* Switch back to on-second time codes and return.
|
|
*/
|
|
true_send(peer, "C");
|
|
up->state = s_Start;
|
|
break;
|
|
case e_Poll:
|
|
/*
|
|
* After each poll, check the station (satellite).
|
|
*/
|
|
true_send(peer, "P");
|
|
/* No state change needed. */
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
/* FALLTHROUGH */
|
|
case t_omega:
|
|
switch (event) {
|
|
case e_Init:
|
|
true_send(peer, "C");
|
|
up->state = s_Start;
|
|
break;
|
|
case e_TS:
|
|
if (up->state != s_Start && up->state != s_Auto) {
|
|
true_send(peer, "\03\r");
|
|
break;
|
|
}
|
|
up->state = s_Auto;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case t_tm:
|
|
switch (event) {
|
|
case e_Init:
|
|
true_send(peer, "F18\r");
|
|
up->state = s_Init;
|
|
break;
|
|
case e_F18:
|
|
true_send(peer, "F50\r");
|
|
up->state = s_F18;
|
|
break;
|
|
case e_F50:
|
|
true_send(peer, "F51\r");
|
|
up->state = s_F50;
|
|
break;
|
|
case e_F51:
|
|
true_send(peer, "F08\r");
|
|
up->state = s_Start;
|
|
break;
|
|
case e_TS:
|
|
if (up->state != s_Start && up->state != s_Auto) {
|
|
true_send(peer, "\03\r");
|
|
break;
|
|
}
|
|
up->state = s_Auto;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case t_tcu:
|
|
switch (event) {
|
|
case e_Init:
|
|
true_send(peer, "MD3\r"); /* GPS Synch'd Gen. */
|
|
true_send(peer, "TSU\r"); /* UTC, not GPS. */
|
|
true_send(peer, "AU\r"); /* Auto Timestamps. */
|
|
up->state = s_Start;
|
|
break;
|
|
case e_TS:
|
|
if (up->state != s_Start && up->state != s_Auto) {
|
|
true_send(peer, "\03\r");
|
|
break;
|
|
}
|
|
up->state = s_Auto;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case t_unknown:
|
|
switch (up->state) {
|
|
case s_Base:
|
|
if (event != e_Init)
|
|
abort();
|
|
true_send(peer, "P\r");
|
|
up->state = s_InqGOES;
|
|
break;
|
|
case s_InqGOES:
|
|
switch (event) {
|
|
case e_Satellite:
|
|
up->type = t_goes;
|
|
true_doevent(peer, e_Init);
|
|
break;
|
|
case e_Init: /*FALLTHROUGH*/
|
|
case e_Huh: /*FALLTHROUGH*/
|
|
case e_TS:
|
|
up->state = s_InqOmega;
|
|
true_send(peer, "C\r");
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
break;
|
|
case s_InqOmega:
|
|
switch (event) {
|
|
case e_TS:
|
|
up->type = t_omega;
|
|
up->state = s_Auto; /* Inq side-effect. */
|
|
break;
|
|
case e_Init: /*FALLTHROUGH*/
|
|
case e_Huh:
|
|
up->state = s_InqTM;
|
|
true_send(peer, "F18\r");
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
break;
|
|
case s_InqTM:
|
|
switch (event) {
|
|
case e_F18:
|
|
up->type = t_tm;
|
|
true_doevent(peer, e_Init);
|
|
break;
|
|
case e_Init: /*FALLTHROUGH*/
|
|
case e_Huh:
|
|
true_send(peer, "PO\r");
|
|
up->state = s_InqTCU;
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
break;
|
|
case s_InqTCU:
|
|
switch (event) {
|
|
case e_Location:
|
|
up->type = t_tcu;
|
|
true_doevent(peer, e_Init);
|
|
break;
|
|
case e_Init: /*FALLTHROUGH*/
|
|
case e_Huh:
|
|
up->state = s_Base;
|
|
sleep(1); /* XXX */
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
break;
|
|
/*
|
|
* An expedient hack to prevent lint complaints,
|
|
* these don't actually need to be used here...
|
|
*/
|
|
case s_Init:
|
|
case s_F18:
|
|
case s_F50:
|
|
case s_Start:
|
|
case s_Auto:
|
|
case s_Max:
|
|
msyslog(LOG_INFO, "TRUE: state %s is unexpected!", stateStr(up->state));
|
|
}
|
|
break;
|
|
default:
|
|
abort();
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
#ifdef CLOCK_PPS720
|
|
if ((pp->sloppyclockflag & CLK_FLAG4) && !up->pcl720init) {
|
|
/* Make counter trigger on gate0, count down from 65535. */
|
|
pcl720_load(PCL720_IOB, PCL720_CTR, i8253_oneshot, 65535);
|
|
/*
|
|
* (These constants are OK since
|
|
* they represent hardware maximums.)
|
|
*/
|
|
NLOG(NLOG_CLOCKINFO) {
|
|
msyslog(LOG_NOTICE, "PCL-720 initialized");
|
|
}
|
|
up->pcl720init++;
|
|
}
|
|
#endif
|
|
|
|
|
|
}
|
|
|
|
/*
|
|
* true_poll - called by the transmit procedure
|
|
*/
|
|
static void
|
|
true_poll(
|
|
int unit,
|
|
struct peer *peer
|
|
)
|
|
{
|
|
struct true_unit *up;
|
|
struct refclockproc *pp;
|
|
|
|
/*
|
|
* You don't need to poll this clock. It puts out timecodes
|
|
* once per second. If asked for a timestamp, take note.
|
|
* The next time a timecode comes in, it will be fed back.
|
|
*/
|
|
pp = peer->procptr;
|
|
up = (struct true_unit *)pp->unitptr;
|
|
if (up->pollcnt > 0)
|
|
up->pollcnt--;
|
|
else {
|
|
true_doevent(peer, e_Init);
|
|
refclock_report(peer, CEVNT_TIMEOUT);
|
|
}
|
|
|
|
/*
|
|
* polled every 64 seconds. Ask true_receive to hand in a
|
|
* timestamp.
|
|
*/
|
|
up->polled = 1;
|
|
pp->polls++;
|
|
}
|
|
|
|
#ifdef CLOCK_PPS720
|
|
/*
|
|
* true_sample720 - sample the PCL-720
|
|
*/
|
|
static u_long
|
|
true_sample720(void)
|
|
{
|
|
unsigned long f;
|
|
|
|
/* We wire the PCL-720's 8253.OUT0 to bit 0 of connector 3.
|
|
* If it is not being held low now, we did not get called
|
|
* within 65535us.
|
|
*/
|
|
if (inb(pcl720_data_16_23(PCL720_IOB)) & 0x01) {
|
|
NLOG(NLOG_CLOCKINFO) {
|
|
msyslog(LOG_NOTICE, "PCL-720 out of synch");
|
|
}
|
|
return (0);
|
|
}
|
|
f = (65536 - pcl720_read(PCL720_IOB, PCL720_CTR));
|
|
#ifdef PPS720_DEBUG
|
|
msyslog(LOG_DEBUG, "PCL-720: %luus", f);
|
|
#endif
|
|
return (f);
|
|
}
|
|
#endif
|
|
|
|
#else
|
|
int refclock_true_bs;
|
|
#endif /* REFCLOCK */
|