d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b119329d81
freebsd-nq/sys/dev/mps/mps_sas.c
Warner Losh 8fe7bf064f Fix bugs in recovery path and improve cm tracking 
Eliminate the TIMEDOUT state. This state really conveyed two different
concepts: I timed out during recovery (and my command got put on the
recovery queue), and I timed out diring discovery (which doesn't).
Separate those two concepts into two flags. Use the TIMEDOUT flag to
fail requests as timed out. Use the on queue flag to remove them from
the queue.

In mps_intr_locked for MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY message
type, when completing commands, ignore the ones that are not in state
INQUEUE. They were already completed as part of the recovery
process. When we complete them twice, we wind up with entries on the
free queue that are marked as busy, trigging asserts.

Reviewed by: scottl (earlier version, just for mpr)
Differential Revision: https://reviews.freebsd.org/D20785
2019-07-08 20:20:01 +00:00

3642 lines
105 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2009 Yahoo! Inc.
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* Communications core for Avago Technologies (LSI) MPT2 */
/* TODO Move headers to mpsvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/selinfo.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/sysctl.h>
#include <sys/endian.h>
#include <sys/queue.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/sbuf.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <machine/stdarg.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_xpt.h>
#include <cam/cam_debug.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_periph.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#if __FreeBSD_version >= 900026
#include <cam/scsi/smp_all.h>
#endif
#include <dev/mps/mpi/mpi2_type.h>
#include <dev/mps/mpi/mpi2.h>
#include <dev/mps/mpi/mpi2_ioc.h>
#include <dev/mps/mpi/mpi2_sas.h>
#include <dev/mps/mpi/mpi2_cnfg.h>
#include <dev/mps/mpi/mpi2_init.h>
#include <dev/mps/mpi/mpi2_tool.h>
#include <dev/mps/mps_ioctl.h>
#include <dev/mps/mpsvar.h>
#include <dev/mps/mps_table.h>
#include <dev/mps/mps_sas.h>
#define MPSSAS_DISCOVERY_TIMEOUT 20
#define MPSSAS_MAX_DISCOVERY_TIMEOUTS 10 /* 200 seconds */
/*
* static array to check SCSI OpCode for EEDP protection bits
*/
#define PRO_R MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP
#define PRO_W MPI2_SCSIIO_EEDPFLAGS_INSERT_OP
#define PRO_V MPI2_SCSIIO_EEDPFLAGS_INSERT_OP
static uint8_t op_code_prot[256] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, PRO_R, 0, PRO_W, 0, 0, 0, PRO_W, PRO_V,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, PRO_W, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, PRO_R, 0, PRO_W, 0, 0, 0, PRO_W, PRO_V,
0, 0, 0, PRO_W, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, PRO_R, 0, PRO_W, 0, 0, 0, PRO_W, PRO_V,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
MALLOC_DEFINE(M_MPSSAS, "MPSSAS", "MPS SAS memory");
static void mpssas_remove_device(struct mps_softc *, struct mps_command *);
static void mpssas_remove_complete(struct mps_softc *, struct mps_command *);
static void mpssas_action(struct cam_sim *sim, union ccb *ccb);
static void mpssas_poll(struct cam_sim *sim);
static int mpssas_send_abort(struct mps_softc *sc, struct mps_command *tm,
struct mps_command *cm);
static void mpssas_scsiio_timeout(void *data);
static void mpssas_abort_complete(struct mps_softc *sc, struct mps_command *cm);
static void mpssas_direct_drive_io(struct mpssas_softc *sassc,
struct mps_command *cm, union ccb *ccb);
static void mpssas_action_scsiio(struct mpssas_softc *, union ccb *);
static void mpssas_scsiio_complete(struct mps_softc *, struct mps_command *);
static void mpssas_action_resetdev(struct mpssas_softc *, union ccb *);
#if __FreeBSD_version >= 900026
static void mpssas_smpio_complete(struct mps_softc *sc, struct mps_command *cm);
static void mpssas_send_smpcmd(struct mpssas_softc *sassc, union ccb *ccb,
uint64_t sasaddr);
static void mpssas_action_smpio(struct mpssas_softc *sassc, union ccb *ccb);
#endif //FreeBSD_version >= 900026
static void mpssas_resetdev_complete(struct mps_softc *, struct mps_command *);
static void mpssas_async(void *callback_arg, uint32_t code,
struct cam_path *path, void *arg);
#if (__FreeBSD_version < 901503) || \
((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000006))
static void mpssas_check_eedp(struct mps_softc *sc, struct cam_path *path,
struct ccb_getdev *cgd);
static void mpssas_read_cap_done(struct cam_periph *periph, union ccb *done_ccb);
#endif
static int mpssas_send_portenable(struct mps_softc *sc);
static void mpssas_portenable_complete(struct mps_softc *sc,
struct mps_command *cm);
struct mpssas_target *
mpssas_find_target_by_handle(struct mpssas_softc *sassc, int start, uint16_t handle)
{
struct mpssas_target *target;
int i;
for (i = start; i < sassc->maxtargets; i++) {
target = &sassc->targets[i];
if (target->handle == handle)
return (target);
}
return (NULL);
}
/* we need to freeze the simq during attach and diag reset, to avoid failing
* commands before device handles have been found by discovery. Since
* discovery involves reading config pages and possibly sending commands,
* discovery actions may continue even after we receive the end of discovery
* event, so refcount discovery actions instead of assuming we can unfreeze
* the simq when we get the event.
*/
void
mpssas_startup_increment(struct mpssas_softc *sassc)
{
MPS_FUNCTRACE(sassc->sc);
if ((sassc->flags & MPSSAS_IN_STARTUP) != 0) {
if (sassc->startup_refcount++ == 0) {
/* just starting, freeze the simq */
mps_dprint(sassc->sc, MPS_INIT,
"%s freezing simq\n", __func__);
#if __FreeBSD_version >= 1000039
xpt_hold_boot();
#endif
xpt_freeze_simq(sassc->sim, 1);
}
mps_dprint(sassc->sc, MPS_INIT, "%s refcount %u\n", __func__,
sassc->startup_refcount);
}
}
void
mpssas_release_simq_reinit(struct mpssas_softc *sassc)
{
if (sassc->flags & MPSSAS_QUEUE_FROZEN) {
sassc->flags &= ~MPSSAS_QUEUE_FROZEN;
xpt_release_simq(sassc->sim, 1);
mps_dprint(sassc->sc, MPS_INFO, "Unfreezing SIM queue\n");
}
}
void
mpssas_startup_decrement(struct mpssas_softc *sassc)
{
MPS_FUNCTRACE(sassc->sc);
if ((sassc->flags & MPSSAS_IN_STARTUP) != 0) {
if (--sassc->startup_refcount == 0) {
/* finished all discovery-related actions, release
* the simq and rescan for the latest topology.
*/
mps_dprint(sassc->sc, MPS_INIT,
"%s releasing simq\n", __func__);
sassc->flags &= ~MPSSAS_IN_STARTUP;
xpt_release_simq(sassc->sim, 1);
#if __FreeBSD_version >= 1000039
xpt_release_boot();
#else
mpssas_rescan_target(sassc->sc, NULL);
#endif
}
mps_dprint(sassc->sc, MPS_INIT, "%s refcount %u\n", __func__,
sassc->startup_refcount);
}
}
/*
* The firmware requires us to stop sending commands when we're doing task
* management.
* XXX The logic for serializing the device has been made lazy and moved to
* mpssas_prepare_for_tm().
*/
struct mps_command *
mpssas_alloc_tm(struct mps_softc *sc)
{
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mps_command *tm;
tm = mps_alloc_high_priority_command(sc);
if (tm == NULL)
return (NULL);
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
req->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
return tm;
}
void
mpssas_free_tm(struct mps_softc *sc, struct mps_command *tm)
{
int target_id = 0xFFFFFFFF;
if (tm == NULL)
return;
/*
* For TM's the devq is frozen for the device. Unfreeze it here and
* free the resources used for freezing the devq. Must clear the
* INRESET flag as well or scsi I/O will not work.
*/
if (tm->cm_targ != NULL) {
tm->cm_targ->flags &= ~MPSSAS_TARGET_INRESET;
target_id = tm->cm_targ->tid;
}
if (tm->cm_ccb) {
mps_dprint(sc, MPS_INFO, "Unfreezing devq for target ID %d\n",
target_id);
xpt_release_devq(tm->cm_ccb->ccb_h.path, 1, TRUE);
xpt_free_path(tm->cm_ccb->ccb_h.path);
xpt_free_ccb(tm->cm_ccb);
}
mps_free_high_priority_command(sc, tm);
}
void
mpssas_rescan_target(struct mps_softc *sc, struct mpssas_target *targ)
{
struct mpssas_softc *sassc = sc->sassc;
path_id_t pathid;
target_id_t targetid;
union ccb *ccb;
MPS_FUNCTRACE(sc);
pathid = cam_sim_path(sassc->sim);
if (targ == NULL)
targetid = CAM_TARGET_WILDCARD;
else
targetid = targ - sassc->targets;
/*
* Allocate a CCB and schedule a rescan.
*/
ccb = xpt_alloc_ccb_nowait();
if (ccb == NULL) {
mps_dprint(sc, MPS_ERROR, "unable to alloc CCB for rescan\n");
return;
}
if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid,
targetid, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
mps_dprint(sc, MPS_ERROR, "unable to create path for rescan\n");
xpt_free_ccb(ccb);
return;
}
if (targetid == CAM_TARGET_WILDCARD)
ccb->ccb_h.func_code = XPT_SCAN_BUS;
else
ccb->ccb_h.func_code = XPT_SCAN_TGT;
mps_dprint(sc, MPS_TRACE, "%s targetid %u\n", __func__, targetid);
xpt_rescan(ccb);
}
static void
mpssas_log_command(struct mps_command *cm, u_int level, const char *fmt, ...)
{
struct sbuf sb;
va_list ap;
char str[192];
char path_str[64];
if (cm == NULL)
return;
/* No need to be in here if debugging isn't enabled */
if ((cm->cm_sc->mps_debug & level) == 0)
return;
sbuf_new(&sb, str, sizeof(str), 0);
va_start(ap, fmt);
if (cm->cm_ccb != NULL) {
xpt_path_string(cm->cm_ccb->csio.ccb_h.path, path_str,
sizeof(path_str));
sbuf_cat(&sb, path_str);
if (cm->cm_ccb->ccb_h.func_code == XPT_SCSI_IO) {
scsi_command_string(&cm->cm_ccb->csio, &sb);
sbuf_printf(&sb, "length %d ",
cm->cm_ccb->csio.dxfer_len);
}
}
else {
sbuf_printf(&sb, "(noperiph:%s%d:%u:%u:%u): ",
cam_sim_name(cm->cm_sc->sassc->sim),
cam_sim_unit(cm->cm_sc->sassc->sim),
cam_sim_bus(cm->cm_sc->sassc->sim),
cm->cm_targ ? cm->cm_targ->tid : 0xFFFFFFFF,
cm->cm_lun);
}
sbuf_printf(&sb, "SMID %u ", cm->cm_desc.Default.SMID);
sbuf_vprintf(&sb, fmt, ap);
sbuf_finish(&sb);
mps_print_field(cm->cm_sc, "%s", sbuf_data(&sb));
va_end(ap);
}
static void
mpssas_remove_volume(struct mps_softc *sc, struct mps_command *tm)
{
MPI2_SCSI_TASK_MANAGE_REPLY *reply;
struct mpssas_target *targ;
uint16_t handle;
MPS_FUNCTRACE(sc);
reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
handle = (uint16_t)(uintptr_t)tm->cm_complete_data;
targ = tm->cm_targ;
if (reply == NULL) {
/* XXX retry the remove after the diag reset completes? */
mps_dprint(sc, MPS_FAULT,
"%s NULL reply resetting device 0x%04x\n", __func__,
handle);
mpssas_free_tm(sc, tm);
return;
}
if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS) {
mps_dprint(sc, MPS_ERROR,
"IOCStatus = 0x%x while resetting device 0x%x\n",
le16toh(reply->IOCStatus), handle);
}
mps_dprint(sc, MPS_XINFO,
"Reset aborted %u commands\n", reply->TerminationCount);
mps_free_reply(sc, tm->cm_reply_data);
tm->cm_reply = NULL; /* Ensures the reply won't get re-freed */
mps_dprint(sc, MPS_XINFO,
"clearing target %u handle 0x%04x\n", targ->tid, handle);
/*
* Don't clear target if remove fails because things will get confusing.
* Leave the devname and sasaddr intact so that we know to avoid reusing
* this target id if possible, and so we can assign the same target id
* to this device if it comes back in the future.
*/
if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) ==
MPI2_IOCSTATUS_SUCCESS) {
targ = tm->cm_targ;
targ->handle = 0x0;
targ->encl_handle = 0x0;
targ->encl_slot = 0x0;
targ->exp_dev_handle = 0x0;
targ->phy_num = 0x0;
targ->linkrate = 0x0;
targ->devinfo = 0x0;
targ->flags = 0x0;
}
mpssas_free_tm(sc, tm);
}
/*
* No Need to call "MPI2_SAS_OP_REMOVE_DEVICE" For Volume removal.
* Otherwise Volume Delete is same as Bare Drive Removal.
*/
void
mpssas_prepare_volume_remove(struct mpssas_softc *sassc, uint16_t handle)
{
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mps_softc *sc;
struct mps_command *tm;
struct mpssas_target *targ = NULL;
MPS_FUNCTRACE(sassc->sc);
sc = sassc->sc;
#ifdef WD_SUPPORT
/*
* If this is a WD controller, determine if the disk should be exposed
* to the OS or not. If disk should be exposed, return from this
* function without doing anything.
*/
if (sc->WD_available && (sc->WD_hide_expose ==
MPS_WD_EXPOSE_ALWAYS)) {
return;
}
#endif //WD_SUPPORT
targ = mpssas_find_target_by_handle(sassc, 0, handle);
if (targ == NULL) {
/* FIXME: what is the action? */
/* We don't know about this device? */
mps_dprint(sc, MPS_ERROR,
"%s %d : invalid handle 0x%x \n", __func__,__LINE__, handle);
return;
}
targ->flags |= MPSSAS_TARGET_INREMOVAL;
tm = mpssas_alloc_tm(sc);
if (tm == NULL) {
mps_dprint(sc, MPS_ERROR,
"%s: command alloc failure\n", __func__);
return;
}
mpssas_rescan_target(sc, targ);
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
req->DevHandle = targ->handle;
req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
/* SAS Hard Link Reset / SATA Link Reset */
req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
tm->cm_targ = targ;
tm->cm_data = NULL;
tm->cm_complete = mpssas_remove_volume;
tm->cm_complete_data = (void *)(uintptr_t)handle;
mps_dprint(sc, MPS_INFO, "%s: Sending reset for target ID %d\n",
__func__, targ->tid);
mpssas_prepare_for_tm(sc, tm, targ, CAM_LUN_WILDCARD);
mps_map_command(sc, tm);
}
/*
* The MPT2 firmware performs debounce on the link to avoid transient link
* errors and false removals. When it does decide that link has been lost
* and a device need to go away, it expects that the host will perform a
* target reset and then an op remove. The reset has the side-effect of
* aborting any outstanding requests for the device, which is required for
* the op-remove to succeed. It's not clear if the host should check for
* the device coming back alive after the reset.
*/
void
mpssas_prepare_remove(struct mpssas_softc *sassc, uint16_t handle)
{
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mps_softc *sc;
struct mps_command *cm;
struct mpssas_target *targ = NULL;
MPS_FUNCTRACE(sassc->sc);
sc = sassc->sc;
targ = mpssas_find_target_by_handle(sassc, 0, handle);
if (targ == NULL) {
/* FIXME: what is the action? */
/* We don't know about this device? */
mps_dprint(sc, MPS_ERROR,
"%s : invalid handle 0x%x \n", __func__, handle);
return;
}
targ->flags |= MPSSAS_TARGET_INREMOVAL;
cm = mpssas_alloc_tm(sc);
if (cm == NULL) {
mps_dprint(sc, MPS_ERROR,
"%s: command alloc failure\n", __func__);
return;
}
mpssas_rescan_target(sc, targ);
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)cm->cm_req;
memset(req, 0, sizeof(*req));
req->DevHandle = htole16(targ->handle);
req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
/* SAS Hard Link Reset / SATA Link Reset */
req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
cm->cm_targ = targ;
cm->cm_data = NULL;
cm->cm_complete = mpssas_remove_device;
cm->cm_complete_data = (void *)(uintptr_t)handle;
mps_dprint(sc, MPS_INFO, "%s: Sending reset for target ID %d\n",
__func__, targ->tid);
mpssas_prepare_for_tm(sc, cm, targ, CAM_LUN_WILDCARD);
mps_map_command(sc, cm);
}
static void
mpssas_remove_device(struct mps_softc *sc, struct mps_command *tm)
{
MPI2_SCSI_TASK_MANAGE_REPLY *reply;
MPI2_SAS_IOUNIT_CONTROL_REQUEST *req;
struct mpssas_target *targ;
struct mps_command *next_cm;
uint16_t handle;
MPS_FUNCTRACE(sc);
reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
handle = (uint16_t)(uintptr_t)tm->cm_complete_data;
targ = tm->cm_targ;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and
* task management commands don't have S/G lists.
*/
if ((tm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
mps_dprint(sc, MPS_ERROR,
"%s: cm_flags = %#x for remove of handle %#04x! "
"This should not happen!\n", __func__, tm->cm_flags,
handle);
}
if (reply == NULL) {
/* XXX retry the remove after the diag reset completes? */
mps_dprint(sc, MPS_FAULT,
"%s NULL reply resetting device 0x%04x\n", __func__,
handle);
mpssas_free_tm(sc, tm);
return;
}
if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS) {
mps_dprint(sc, MPS_ERROR,
"IOCStatus = 0x%x while resetting device 0x%x\n",
le16toh(reply->IOCStatus), handle);
}
mps_dprint(sc, MPS_XINFO, "Reset aborted %u commands\n",
le32toh(reply->TerminationCount));
mps_free_reply(sc, tm->cm_reply_data);
tm->cm_reply = NULL; /* Ensures the reply won't get re-freed */
/* Reuse the existing command */
req = (MPI2_SAS_IOUNIT_CONTROL_REQUEST *)tm->cm_req;
memset(req, 0, sizeof(*req));
req->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
req->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
req->DevHandle = htole16(handle);
tm->cm_data = NULL;
tm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
tm->cm_complete = mpssas_remove_complete;
tm->cm_complete_data = (void *)(uintptr_t)handle;
mps_map_command(sc, tm);
mps_dprint(sc, MPS_XINFO, "clearing target %u handle 0x%04x\n",
targ->tid, handle);
TAILQ_FOREACH_SAFE(tm, &targ->commands, cm_link, next_cm) {
union ccb *ccb;
mps_dprint(sc, MPS_XINFO, "Completing missed command %p\n", tm);
ccb = tm->cm_complete_data;
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
mpssas_scsiio_complete(sc, tm);
}
}
static void
mpssas_remove_complete(struct mps_softc *sc, struct mps_command *tm)
{
MPI2_SAS_IOUNIT_CONTROL_REPLY *reply;
uint16_t handle;
struct mpssas_target *targ;
struct mpssas_lun *lun;
MPS_FUNCTRACE(sc);
reply = (MPI2_SAS_IOUNIT_CONTROL_REPLY *)tm->cm_reply;
handle = (uint16_t)(uintptr_t)tm->cm_complete_data;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and
* task management commands don't have S/G lists.
*/
if ((tm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
mps_dprint(sc, MPS_XINFO,
"%s: cm_flags = %#x for remove of handle %#04x! "
"This should not happen!\n", __func__, tm->cm_flags,
handle);
mpssas_free_tm(sc, tm);
return;
}
if (reply == NULL) {
/* most likely a chip reset */
mps_dprint(sc, MPS_FAULT,
"%s NULL reply removing device 0x%04x\n", __func__, handle);
mpssas_free_tm(sc, tm);
return;
}
mps_dprint(sc, MPS_XINFO,
"%s on handle 0x%04x, IOCStatus= 0x%x\n", __func__,
handle, le16toh(reply->IOCStatus));
/*
* Don't clear target if remove fails because things will get confusing.
* Leave the devname and sasaddr intact so that we know to avoid reusing
* this target id if possible, and so we can assign the same target id
* to this device if it comes back in the future.
*/
if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) ==
MPI2_IOCSTATUS_SUCCESS) {
targ = tm->cm_targ;
targ->handle = 0x0;
targ->encl_handle = 0x0;
targ->encl_slot = 0x0;
targ->exp_dev_handle = 0x0;
targ->phy_num = 0x0;
targ->linkrate = 0x0;
targ->devinfo = 0x0;
targ->flags = 0x0;
while(!SLIST_EMPTY(&targ->luns)) {
lun = SLIST_FIRST(&targ->luns);
SLIST_REMOVE_HEAD(&targ->luns, lun_link);
free(lun, M_MPT2);
}
}
mpssas_free_tm(sc, tm);
}
static int
mpssas_register_events(struct mps_softc *sc)
{
u32 events[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
bzero(events, 16);
setbit(events, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
setbit(events, MPI2_EVENT_SAS_DISCOVERY);
setbit(events, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
setbit(events, MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE);
setbit(events, MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW);
setbit(events, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
setbit(events, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
setbit(events, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
setbit(events, MPI2_EVENT_IR_VOLUME);
setbit(events, MPI2_EVENT_IR_PHYSICAL_DISK);
setbit(events, MPI2_EVENT_IR_OPERATION_STATUS);
setbit(events, MPI2_EVENT_LOG_ENTRY_ADDED);
mps_register_events(sc, events, mpssas_evt_handler, NULL,
&sc->sassc->mpssas_eh);
return (0);
}
int
mps_attach_sas(struct mps_softc *sc)
{
struct mpssas_softc *sassc;
cam_status status;
int unit, error = 0, reqs;
MPS_FUNCTRACE(sc);
mps_dprint(sc, MPS_INIT, "%s entered\n", __func__);
sassc = malloc(sizeof(struct mpssas_softc), M_MPT2, M_WAITOK|M_ZERO);
if(!sassc) {
mps_dprint(sc, MPS_INIT|MPS_ERROR,
"Cannot allocate SAS controller memory\n");
return (ENOMEM);
}
/*
* XXX MaxTargets could change during a reinit. Since we don't
* resize the targets[] array during such an event, cache the value
* of MaxTargets here so that we don't get into trouble later. This
* should move into the reinit logic.
*/
sassc->maxtargets = sc->facts->MaxTargets + sc->facts->MaxVolumes;
sassc->targets = malloc(sizeof(struct mpssas_target) *
sassc->maxtargets, M_MPT2, M_WAITOK|M_ZERO);
if(!sassc->targets) {
mps_dprint(sc, MPS_INIT|MPS_ERROR,
"Cannot allocate SAS target memory\n");
free(sassc, M_MPT2);
return (ENOMEM);
}
sc->sassc = sassc;
sassc->sc = sc;
reqs = sc->num_reqs - sc->num_prireqs - 1;
if ((sassc->devq = cam_simq_alloc(reqs)) == NULL) {
mps_dprint(sc, MPS_ERROR, "Cannot allocate SIMQ\n");
error = ENOMEM;
goto out;
}
unit = device_get_unit(sc->mps_dev);
sassc->sim = cam_sim_alloc(mpssas_action, mpssas_poll, "mps", sassc,
unit, &sc->mps_mtx, reqs, reqs, sassc->devq);
if (sassc->sim == NULL) {
mps_dprint(sc, MPS_INIT|MPS_ERROR, "Cannot allocate SIM\n");
error = EINVAL;
goto out;
}
TAILQ_INIT(&sassc->ev_queue);
/* Initialize taskqueue for Event Handling */
TASK_INIT(&sassc->ev_task, 0, mpssas_firmware_event_work, sc);
sassc->ev_tq = taskqueue_create("mps_taskq", M_NOWAIT | M_ZERO,
taskqueue_thread_enqueue, &sassc->ev_tq);
taskqueue_start_threads(&sassc->ev_tq, 1, PRIBIO, "%s taskq",
device_get_nameunit(sc->mps_dev));
mps_lock(sc);
/*
* XXX There should be a bus for every port on the adapter, but since
* we're just going to fake the topology for now, we'll pretend that
* everything is just a target on a single bus.
*/
if ((error = xpt_bus_register(sassc->sim, sc->mps_dev, 0)) != 0) {
mps_dprint(sc, MPS_INIT|MPS_ERROR,
"Error %d registering SCSI bus\n", error);
mps_unlock(sc);
goto out;
}
/*
* Assume that discovery events will start right away.
*
* Hold off boot until discovery is complete.
*/
sassc->flags |= MPSSAS_IN_STARTUP | MPSSAS_IN_DISCOVERY;
sc->sassc->startup_refcount = 0;
mpssas_startup_increment(sassc);
callout_init(&sassc->discovery_callout, 1 /*mpsafe*/);
/*
* Register for async events so we can determine the EEDP
* capabilities of devices.
*/
status = xpt_create_path(&sassc->path, /*periph*/NULL,
cam_sim_path(sc->sassc->sim), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD);
if (status != CAM_REQ_CMP) {
mps_dprint(sc, MPS_ERROR|MPS_INIT,
"Error %#x creating sim path\n", status);
sassc->path = NULL;
} else {
int event;
#if (__FreeBSD_version >= 1000006) || \
((__FreeBSD_version >= 901503) && (__FreeBSD_version < 1000000))
event = AC_ADVINFO_CHANGED;
#else
event = AC_FOUND_DEVICE;
#endif
status = xpt_register_async(event, mpssas_async, sc,
sassc->path);
if (status != CAM_REQ_CMP) {
mps_dprint(sc, MPS_ERROR,
"Error %#x registering async handler for "
"AC_ADVINFO_CHANGED events\n", status);
xpt_free_path(sassc->path);
sassc->path = NULL;
}
}
if (status != CAM_REQ_CMP) {
/*
* EEDP use is the exception, not the rule.
* Warn the user, but do not fail to attach.
*/
mps_printf(sc, "EEDP capabilities disabled.\n");
}
mps_unlock(sc);
mpssas_register_events(sc);
out:
if (error)
mps_detach_sas(sc);
mps_dprint(sc, MPS_INIT, "%s exit error= %d\n", __func__, error);
return (error);
}
int
mps_detach_sas(struct mps_softc *sc)
{
struct mpssas_softc *sassc;
struct mpssas_lun *lun, *lun_tmp;
struct mpssas_target *targ;
int i;
MPS_FUNCTRACE(sc);
if (sc->sassc == NULL)
return (0);
sassc = sc->sassc;
mps_deregister_events(sc, sassc->mpssas_eh);
/*
* Drain and free the event handling taskqueue with the lock
* unheld so that any parallel processing tasks drain properly
* without deadlocking.
*/
if (sassc->ev_tq != NULL)
taskqueue_free(sassc->ev_tq);
/* Make sure CAM doesn't wedge if we had to bail out early. */
mps_lock(sc);
while (sassc->startup_refcount != 0)
mpssas_startup_decrement(sassc);
/* Deregister our async handler */
if (sassc->path != NULL) {
xpt_register_async(0, mpssas_async, sc, sassc->path);
xpt_free_path(sassc->path);
sassc->path = NULL;
}
if (sassc->flags & MPSSAS_IN_STARTUP)
xpt_release_simq(sassc->sim, 1);
if (sassc->sim != NULL) {
xpt_bus_deregister(cam_sim_path(sassc->sim));
cam_sim_free(sassc->sim, FALSE);
}
mps_unlock(sc);
if (sassc->devq != NULL)
cam_simq_free(sassc->devq);
for(i=0; i< sassc->maxtargets ;i++) {
targ = &sassc->targets[i];
SLIST_FOREACH_SAFE(lun, &targ->luns, lun_link, lun_tmp) {
free(lun, M_MPT2);
}
}
free(sassc->targets, M_MPT2);
free(sassc, M_MPT2);
sc->sassc = NULL;
return (0);
}
void
mpssas_discovery_end(struct mpssas_softc *sassc)
{
struct mps_softc *sc = sassc->sc;
MPS_FUNCTRACE(sc);
if (sassc->flags & MPSSAS_DISCOVERY_TIMEOUT_PENDING)
callout_stop(&sassc->discovery_callout);
/*
* After discovery has completed, check the mapping table for any
* missing devices and update their missing counts. Only do this once
* whenever the driver is initialized so that missing counts aren't
* updated unnecessarily. Note that just because discovery has
* completed doesn't mean that events have been processed yet. The
* check_devices function is a callout timer that checks if ALL devices
* are missing. If so, it will wait a little longer for events to
* complete and keep resetting itself until some device in the mapping
* table is not missing, meaning that event processing has started.
*/
if (sc->track_mapping_events) {
mps_dprint(sc, MPS_XINFO | MPS_MAPPING, "Discovery has "
"completed. Check for missing devices in the mapping "
"table.\n");
callout_reset(&sc->device_check_callout,
MPS_MISSING_CHECK_DELAY * hz, mps_mapping_check_devices,
sc);
}
}
static void
mpssas_action(struct cam_sim *sim, union ccb *ccb)
{
struct mpssas_softc *sassc;
sassc = cam_sim_softc(sim);
MPS_FUNCTRACE(sassc->sc);
mps_dprint(sassc->sc, MPS_TRACE, "ccb func_code 0x%x\n",
ccb->ccb_h.func_code);
mtx_assert(&sassc->sc->mps_mtx, MA_OWNED);
switch (ccb->ccb_h.func_code) {
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = &ccb->cpi;
struct mps_softc *sc = sassc->sc;
cpi->version_num = 1;
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->target_sprt = 0;
#if __FreeBSD_version >= 1000039
cpi->hba_misc = PIM_NOBUSRESET | PIM_UNMAPPED | PIM_NOSCAN;
#else
cpi->hba_misc = PIM_NOBUSRESET | PIM_UNMAPPED;
#endif
cpi->hba_eng_cnt = 0;
cpi->max_target = sassc->maxtargets - 1;
cpi->max_lun = 255;
/*
* initiator_id is set here to an ID outside the set of valid
* target IDs (including volumes).
*/
cpi->initiator_id = sassc->maxtargets;
strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strlcpy(cpi->hba_vid, "Avago Tech", HBA_IDLEN);
strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 150000;
cpi->transport = XPORT_SAS;
cpi->transport_version = 0;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_SPC;
cpi->maxio = sc->maxio;
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
break;
}
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts;
struct ccb_trans_settings_sas *sas;
struct ccb_trans_settings_scsi *scsi;
struct mpssas_target *targ;
cts = &ccb->cts;
sas = &cts->xport_specific.sas;
scsi = &cts->proto_specific.scsi;
KASSERT(cts->ccb_h.target_id < sassc->maxtargets,
("Target %d out of bounds in XPT_GET_TRANS_SETTINGS\n",
cts->ccb_h.target_id));
targ = &sassc->targets[cts->ccb_h.target_id];
if (targ->handle == 0x0) {
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
break;
}
cts->protocol_version = SCSI_REV_SPC2;
cts->transport = XPORT_SAS;
cts->transport_version = 0;
sas->valid = CTS_SAS_VALID_SPEED;
switch (targ->linkrate) {
case 0x08:
sas->bitrate = 150000;
break;
case 0x09:
sas->bitrate = 300000;
break;
case 0x0a:
sas->bitrate = 600000;
break;
default:
sas->valid = 0;
}
cts->protocol = PROTO_SCSI;
scsi->valid = CTS_SCSI_VALID_TQ;
scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
break;
}
case XPT_CALC_GEOMETRY:
cam_calc_geometry(&ccb->ccg, /*extended*/1);
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
break;
case XPT_RESET_DEV:
mps_dprint(sassc->sc, MPS_XINFO, "mpssas_action XPT_RESET_DEV\n");
mpssas_action_resetdev(sassc, ccb);
return;
case XPT_RESET_BUS:
case XPT_ABORT:
case XPT_TERM_IO:
mps_dprint(sassc->sc, MPS_XINFO,
"mpssas_action faking success for abort or reset\n");
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
break;
case XPT_SCSI_IO:
mpssas_action_scsiio(sassc, ccb);
return;
#if __FreeBSD_version >= 900026
case XPT_SMP_IO:
mpssas_action_smpio(sassc, ccb);
return;
#endif
default:
mpssas_set_ccbstatus(ccb, CAM_FUNC_NOTAVAIL);
break;
}
xpt_done(ccb);
}
static void
mpssas_announce_reset(struct mps_softc *sc, uint32_t ac_code,
target_id_t target_id, lun_id_t lun_id)
{
path_id_t path_id = cam_sim_path(sc->sassc->sim);
struct cam_path *path;
mps_dprint(sc, MPS_XINFO, "%s code %x target %d lun %jx\n", __func__,
ac_code, target_id, (uintmax_t)lun_id);
if (xpt_create_path(&path, NULL,
path_id, target_id, lun_id) != CAM_REQ_CMP) {
mps_dprint(sc, MPS_ERROR, "unable to create path for reset "
"notification\n");
return;
}
xpt_async(ac_code, path, NULL);
xpt_free_path(path);
}
static void
mpssas_complete_all_commands(struct mps_softc *sc)
{
struct mps_command *cm;
int i;
int completed;
MPS_FUNCTRACE(sc);
mtx_assert(&sc->mps_mtx, MA_OWNED);
/* complete all commands with a NULL reply */
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
if (cm->cm_state == MPS_CM_STATE_FREE)
continue;
cm->cm_state = MPS_CM_STATE_BUSY;
cm->cm_reply = NULL;
completed = 0;
if (cm->cm_flags & MPS_CM_FLAGS_SATA_ID_TIMEOUT) {
MPASS(cm->cm_data);
free(cm->cm_data, M_MPT2);
cm->cm_data = NULL;
}
if (cm->cm_flags & MPS_CM_FLAGS_POLLED)
cm->cm_flags |= MPS_CM_FLAGS_COMPLETE;
if (cm->cm_complete != NULL) {
mpssas_log_command(cm, MPS_RECOVERY,
"completing cm %p state %x ccb %p for diag reset\n",
cm, cm->cm_state, cm->cm_ccb);
cm->cm_complete(sc, cm);
completed = 1;
} else if (cm->cm_flags & MPS_CM_FLAGS_WAKEUP) {
mpssas_log_command(cm, MPS_RECOVERY,
"waking up cm %p state %x ccb %p for diag reset\n",
cm, cm->cm_state, cm->cm_ccb);
wakeup(cm);
completed = 1;
}
if ((completed == 0) && (cm->cm_state != MPS_CM_STATE_FREE)) {
/* this should never happen, but if it does, log */
mpssas_log_command(cm, MPS_RECOVERY,
"cm %p state %x flags 0x%x ccb %p during diag "
"reset\n", cm, cm->cm_state, cm->cm_flags,
cm->cm_ccb);
}
}
sc->io_cmds_active = 0;
}
void
mpssas_handle_reinit(struct mps_softc *sc)
{
int i;
/* Go back into startup mode and freeze the simq, so that CAM
* doesn't send any commands until after we've rediscovered all
* targets and found the proper device handles for them.
*
* After the reset, portenable will trigger discovery, and after all
* discovery-related activities have finished, the simq will be
* released.
*/
mps_dprint(sc, MPS_INIT, "%s startup\n", __func__);
sc->sassc->flags |= MPSSAS_IN_STARTUP;
sc->sassc->flags |= MPSSAS_IN_DISCOVERY;
mpssas_startup_increment(sc->sassc);
/* notify CAM of a bus reset */
mpssas_announce_reset(sc, AC_BUS_RESET, CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD);
/* complete and cleanup after all outstanding commands */
mpssas_complete_all_commands(sc);
mps_dprint(sc, MPS_INIT,
"%s startup %u after command completion\n", __func__,
sc->sassc->startup_refcount);
/* zero all the target handles, since they may change after the
* reset, and we have to rediscover all the targets and use the new
* handles.
*/
for (i = 0; i < sc->sassc->maxtargets; i++) {
if (sc->sassc->targets[i].outstanding != 0)
mps_dprint(sc, MPS_INIT, "target %u outstanding %u\n",
i, sc->sassc->targets[i].outstanding);
sc->sassc->targets[i].handle = 0x0;
sc->sassc->targets[i].exp_dev_handle = 0x0;
sc->sassc->targets[i].outstanding = 0;
sc->sassc->targets[i].flags = MPSSAS_TARGET_INDIAGRESET;
}
}
static void
mpssas_tm_timeout(void *data)
{
struct mps_command *tm = data;
struct mps_softc *sc = tm->cm_sc;
mtx_assert(&sc->mps_mtx, MA_OWNED);
mpssas_log_command(tm, MPS_INFO|MPS_RECOVERY,
"task mgmt %p timed out\n", tm);
KASSERT(tm->cm_state == MPS_CM_STATE_INQUEUE,
("command not inqueue\n"));
tm->cm_state = MPS_CM_STATE_BUSY;
mps_reinit(sc);
}
static void
mpssas_logical_unit_reset_complete(struct mps_softc *sc, struct mps_command *tm)
{
MPI2_SCSI_TASK_MANAGE_REPLY *reply;
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
unsigned int cm_count = 0;
struct mps_command *cm;
struct mpssas_target *targ;
callout_stop(&tm->cm_callout);
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
targ = tm->cm_targ;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and
* task management commands don't have S/G lists.
* XXXSL So should it be an assertion?
*/
if ((tm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
mps_dprint(sc, MPS_RECOVERY|MPS_ERROR,
"%s: cm_flags = %#x for LUN reset! "
"This should not happen!\n", __func__, tm->cm_flags);
mpssas_free_tm(sc, tm);
return;
}
if (reply == NULL) {
mps_dprint(sc, MPS_RECOVERY, "NULL reset reply for tm %p\n",
tm);
if ((sc->mps_flags & MPS_FLAGS_DIAGRESET) != 0) {
/* this completion was due to a reset, just cleanup */
mps_dprint(sc, MPS_RECOVERY, "Hardware undergoing "
"reset, ignoring NULL LUN reset reply\n");
targ->tm = NULL;
mpssas_free_tm(sc, tm);
}
else {
/* we should have gotten a reply. */
mps_dprint(sc, MPS_INFO|MPS_RECOVERY, "NULL reply on "
"LUN reset attempt, resetting controller\n");
mps_reinit(sc);
}
return;
}
mps_dprint(sc, MPS_RECOVERY,
"logical unit reset status 0x%x code 0x%x count %u\n",
le16toh(reply->IOCStatus), le32toh(reply->ResponseCode),
le32toh(reply->TerminationCount));
/*
* See if there are any outstanding commands for this LUN.
* This could be made more efficient by using a per-LU data
* structure of some sort.
*/
TAILQ_FOREACH(cm, &targ->commands, cm_link) {
if (cm->cm_lun == tm->cm_lun)
cm_count++;
}
if (cm_count == 0) {
mps_dprint(sc, MPS_RECOVERY|MPS_INFO,
"Finished recovery after LUN reset for target %u\n",
targ->tid);
mpssas_announce_reset(sc, AC_SENT_BDR, targ->tid, tm->cm_lun);
/*
* We've finished recovery for this logical unit. check and
* see if some other logical unit has a timedout command
* that needs to be processed.
*/
cm = TAILQ_FIRST(&targ->timedout_commands);
if (cm) {
mps_dprint(sc, MPS_INFO|MPS_RECOVERY,
"More commands to abort for target %u\n",
targ->tid);
mpssas_send_abort(sc, tm, cm);
} else {
targ->tm = NULL;
mpssas_free_tm(sc, tm);
}
} else {
/*
* If we still have commands for this LUN, the reset
* effectively failed, regardless of the status reported.
* Escalate to a target reset.
*/
mps_dprint(sc, MPS_INFO|MPS_RECOVERY,
"logical unit reset complete for target %u, but still "
"have %u command(s), sending target reset\n", targ->tid,
cm_count);
mpssas_send_reset(sc, tm,
MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET);
}
}
static void
mpssas_target_reset_complete(struct mps_softc *sc, struct mps_command *tm)
{
MPI2_SCSI_TASK_MANAGE_REPLY *reply;
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mpssas_target *targ;
callout_stop(&tm->cm_callout);
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
targ = tm->cm_targ;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and
* task management commands don't have S/G lists.
*/
if ((tm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
mps_dprint(sc, MPS_ERROR,"%s: cm_flags = %#x for target reset! "
"This should not happen!\n", __func__, tm->cm_flags);
mpssas_free_tm(sc, tm);
return;
}
if (reply == NULL) {
mps_dprint(sc, MPS_RECOVERY,
"NULL target reset reply for tm %pi TaskMID %u\n",
tm, le16toh(req->TaskMID));
if ((sc->mps_flags & MPS_FLAGS_DIAGRESET) != 0) {
/* this completion was due to a reset, just cleanup */
mps_dprint(sc, MPS_RECOVERY, "Hardware undergoing "
"reset, ignoring NULL target reset reply\n");
targ->tm = NULL;
mpssas_free_tm(sc, tm);
} else {
/* we should have gotten a reply. */
mps_dprint(sc, MPS_INFO|MPS_RECOVERY, "NULL reply on "
"target reset attempt, resetting controller\n");
mps_reinit(sc);
}
return;
}
mps_dprint(sc, MPS_RECOVERY,
"target reset status 0x%x code 0x%x count %u\n",
le16toh(reply->IOCStatus), le32toh(reply->ResponseCode),
le32toh(reply->TerminationCount));
if (targ->outstanding == 0) {
/* we've finished recovery for this target and all
* of its logical units.
*/
mps_dprint(sc, MPS_RECOVERY|MPS_INFO,
"Finished reset recovery for target %u\n", targ->tid);
mpssas_announce_reset(sc, AC_SENT_BDR, tm->cm_targ->tid,
CAM_LUN_WILDCARD);
targ->tm = NULL;
mpssas_free_tm(sc, tm);
} else {
/*
* After a target reset, if this target still has
* outstanding commands, the reset effectively failed,
* regardless of the status reported. escalate.
*/
mps_dprint(sc, MPS_INFO|MPS_RECOVERY,
"Target reset complete for target %u, but still have %u "
"command(s), resetting controller\n", targ->tid,
targ->outstanding);
mps_reinit(sc);
}
}
#define MPS_RESET_TIMEOUT 30
int
mpssas_send_reset(struct mps_softc *sc, struct mps_command *tm, uint8_t type)
{
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mpssas_target *target;
int err;
target = tm->cm_targ;
if (target->handle == 0) {
mps_dprint(sc, MPS_ERROR,"%s null devhandle for target_id %d\n",
__func__, target->tid);
return -1;
}
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
req->DevHandle = htole16(target->handle);
req->TaskType = type;
if (type == MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET) {
/* XXX Need to handle invalid LUNs */
MPS_SET_LUN(req->LUN, tm->cm_lun);
tm->cm_targ->logical_unit_resets++;
mps_dprint(sc, MPS_RECOVERY|MPS_INFO,
"Sending logical unit reset to target %u lun %d\n",
target->tid, tm->cm_lun);
tm->cm_complete = mpssas_logical_unit_reset_complete;
mpssas_prepare_for_tm(sc, tm, target, tm->cm_lun);
} else if (type == MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
/*
* Target reset method =
* SAS Hard Link Reset / SATA Link Reset
*/
req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
tm->cm_targ->target_resets++;
mps_dprint(sc, MPS_RECOVERY|MPS_INFO,
"Sending target reset to target %u\n", target->tid);
tm->cm_complete = mpssas_target_reset_complete;
mpssas_prepare_for_tm(sc, tm, target, CAM_LUN_WILDCARD);
} else {
mps_dprint(sc, MPS_ERROR, "unexpected reset type 0x%x\n", type);
return -1;
}
tm->cm_data = NULL;
tm->cm_complete_data = (void *)tm;
callout_reset(&tm->cm_callout, MPS_RESET_TIMEOUT * hz,
mpssas_tm_timeout, tm);
err = mps_map_command(sc, tm);
if (err)
mps_dprint(sc, MPS_ERROR|MPS_RECOVERY,
"error %d sending reset type %u\n",
err, type);
return err;
}
static void
mpssas_abort_complete(struct mps_softc *sc, struct mps_command *tm)
{
struct mps_command *cm;
MPI2_SCSI_TASK_MANAGE_REPLY *reply;
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mpssas_target *targ;
callout_stop(&tm->cm_callout);
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
targ = tm->cm_targ;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and
* task management commands don't have S/G lists.
*/
if ((tm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
mps_dprint(sc, MPS_RECOVERY,
"cm_flags = %#x for abort %p TaskMID %u!\n",
tm->cm_flags, tm, le16toh(req->TaskMID));
mpssas_free_tm(sc, tm);
return;
}
if (reply == NULL) {
mps_dprint(sc, MPS_RECOVERY,
"NULL abort reply for tm %p TaskMID %u\n",
tm, le16toh(req->TaskMID));
if ((sc->mps_flags & MPS_FLAGS_DIAGRESET) != 0) {
/* this completion was due to a reset, just cleanup */
mps_dprint(sc, MPS_RECOVERY, "Hardware undergoing "
"reset, ignoring NULL abort reply\n");
targ->tm = NULL;
mpssas_free_tm(sc, tm);
} else {
/* we should have gotten a reply. */
mps_dprint(sc, MPS_INFO|MPS_RECOVERY, "NULL reply on "
"abort attempt, resetting controller\n");
mps_reinit(sc);
}
return;
}
mps_dprint(sc, MPS_RECOVERY,
"abort TaskMID %u status 0x%x code 0x%x count %u\n",
le16toh(req->TaskMID),
le16toh(reply->IOCStatus), le32toh(reply->ResponseCode),
le32toh(reply->TerminationCount));
cm = TAILQ_FIRST(&tm->cm_targ->timedout_commands);
if (cm == NULL) {
/*
* If there are no more timedout commands, we're done with
* error recovery for this target.
*/
mps_dprint(sc, MPS_INFO|MPS_RECOVERY,
"Finished abort recovery for target %u\n", targ->tid);
targ->tm = NULL;
mpssas_free_tm(sc, tm);
} else if (le16toh(req->TaskMID) != cm->cm_desc.Default.SMID) {
/* abort success, but we have more timedout commands to abort */
mps_dprint(sc, MPS_INFO|MPS_RECOVERY,
"Continuing abort recovery for target %u\n", targ->tid);
mpssas_send_abort(sc, tm, cm);
} else {
/* we didn't get a command completion, so the abort
* failed as far as we're concerned. escalate.
*/
mps_dprint(sc, MPS_RECOVERY,
"Abort failed for target %u, sending logical unit reset\n",
targ->tid);
mpssas_send_reset(sc, tm,
MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET);
}
}
#define MPS_ABORT_TIMEOUT 5
static int
mpssas_send_abort(struct mps_softc *sc, struct mps_command *tm, struct mps_command *cm)
{
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mpssas_target *targ;
int err;
targ = cm->cm_targ;
if (targ->handle == 0) {
mps_dprint(sc, MPS_ERROR|MPS_RECOVERY,
"%s null devhandle for target_id %d\n",
__func__, cm->cm_ccb->ccb_h.target_id);
return -1;
}
mpssas_log_command(cm, MPS_RECOVERY|MPS_INFO,
"Aborting command %p\n", cm);
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
req->DevHandle = htole16(targ->handle);
req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK;
/* XXX Need to handle invalid LUNs */
MPS_SET_LUN(req->LUN, cm->cm_ccb->ccb_h.target_lun);
req->TaskMID = htole16(cm->cm_desc.Default.SMID);
tm->cm_data = NULL;
tm->cm_complete = mpssas_abort_complete;
tm->cm_complete_data = (void *)tm;
tm->cm_targ = cm->cm_targ;
tm->cm_lun = cm->cm_lun;
callout_reset(&tm->cm_callout, MPS_ABORT_TIMEOUT * hz,
mpssas_tm_timeout, tm);
targ->aborts++;
mpssas_prepare_for_tm(sc, tm, targ, tm->cm_lun);
err = mps_map_command(sc, tm);
if (err)
mps_dprint(sc, MPS_ERROR|MPS_RECOVERY,
"error %d sending abort for cm %p SMID %u\n",
err, cm, req->TaskMID);
return err;
}
static void
mpssas_scsiio_timeout(void *data)
{
sbintime_t elapsed, now;
union ccb *ccb;
struct mps_softc *sc;
struct mps_command *cm;
struct mpssas_target *targ;
cm = (struct mps_command *)data;
sc = cm->cm_sc;
ccb = cm->cm_ccb;
now = sbinuptime();
MPS_FUNCTRACE(sc);
mtx_assert(&sc->mps_mtx, MA_OWNED);
mps_dprint(sc, MPS_XINFO|MPS_RECOVERY, "Timeout checking cm %p\n", sc);
/*
* Run the interrupt handler to make sure it's not pending. This
* isn't perfect because the command could have already completed
* and been re-used, though this is unlikely.
*/
mps_intr_locked(sc);
if (cm->cm_flags & MPS_CM_FLAGS_ON_RECOVERY) {
mpssas_log_command(cm, MPS_XINFO,
"SCSI command %p almost timed out\n", cm);
return;
}
if (cm->cm_ccb == NULL) {
mps_dprint(sc, MPS_ERROR, "command timeout with NULL ccb\n");
return;
}
targ = cm->cm_targ;
targ->timeouts++;
elapsed = now - ccb->ccb_h.qos.sim_data;
mpssas_log_command(cm, MPS_INFO|MPS_RECOVERY,
"Command timeout on target %u(0x%04x) %d set, %d.%d elapsed\n",
targ->tid, targ->handle, ccb->ccb_h.timeout,
sbintime_getsec(elapsed), elapsed & 0xffffffff);
/* XXX first, check the firmware state, to see if it's still
* operational. if not, do a diag reset.
*/
mpssas_set_ccbstatus(cm->cm_ccb, CAM_CMD_TIMEOUT);
cm->cm_flags |= MPS_CM_FLAGS_ON_RECOVERY | MPS_CM_FLAGS_TIMEDOUT;
TAILQ_INSERT_TAIL(&targ->timedout_commands, cm, cm_recovery);
if (targ->tm != NULL) {
/* target already in recovery, just queue up another
* timedout command to be processed later.
*/
mps_dprint(sc, MPS_RECOVERY,
"queued timedout cm %p for processing by tm %p\n",
cm, targ->tm);
} else if ((targ->tm = mpssas_alloc_tm(sc)) != NULL) {
mps_dprint(sc, MPS_RECOVERY|MPS_INFO,
"Sending abort to target %u for SMID %d\n", targ->tid,
cm->cm_desc.Default.SMID);
mps_dprint(sc, MPS_RECOVERY, "timedout cm %p allocated tm %p\n",
cm, targ->tm);
/* start recovery by aborting the first timedout command */
mpssas_send_abort(sc, targ->tm, cm);
} else {
/* XXX queue this target up for recovery once a TM becomes
* available. The firmware only has a limited number of
* HighPriority credits for the high priority requests used
* for task management, and we ran out.
*
* Isilon: don't worry about this for now, since we have
* more credits than disks in an enclosure, and limit
* ourselves to one TM per target for recovery.
*/
mps_dprint(sc, MPS_ERROR|MPS_RECOVERY,
"timedout cm %p failed to allocate a tm\n", cm);
}
}
static void
mpssas_action_scsiio(struct mpssas_softc *sassc, union ccb *ccb)
{
MPI2_SCSI_IO_REQUEST *req;
struct ccb_scsiio *csio;
struct mps_softc *sc;
struct mpssas_target *targ;
struct mpssas_lun *lun;
struct mps_command *cm;
uint8_t i, lba_byte, *ref_tag_addr;
uint16_t eedp_flags;
uint32_t mpi_control;
sc = sassc->sc;
MPS_FUNCTRACE(sc);
mtx_assert(&sc->mps_mtx, MA_OWNED);
csio = &ccb->csio;
KASSERT(csio->ccb_h.target_id < sassc->maxtargets,
("Target %d out of bounds in XPT_SCSI_IO\n",
csio->ccb_h.target_id));
targ = &sassc->targets[csio->ccb_h.target_id];
mps_dprint(sc, MPS_TRACE, "ccb %p target flag %x\n", ccb, targ->flags);
if (targ->handle == 0x0) {
mps_dprint(sc, MPS_ERROR, "%s NULL handle for target %u\n",
__func__, csio->ccb_h.target_id);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
xpt_done(ccb);
return;
}
if (targ->flags & MPS_TARGET_FLAGS_RAID_COMPONENT) {
mps_dprint(sc, MPS_ERROR, "%s Raid component no SCSI IO "
"supported %u\n", __func__, csio->ccb_h.target_id);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
xpt_done(ccb);
return;
}
/*
* Sometimes, it is possible to get a command that is not "In
* Progress" and was actually aborted by the upper layer. Check for
* this here and complete the command without error.
*/
if (mpssas_get_ccbstatus(ccb) != CAM_REQ_INPROG) {
mps_dprint(sc, MPS_TRACE, "%s Command is not in progress for "
"target %u\n", __func__, csio->ccb_h.target_id);
xpt_done(ccb);
return;
}
/*
* If devinfo is 0 this will be a volume. In that case don't tell CAM
* that the volume has timed out. We want volumes to be enumerated
* until they are deleted/removed, not just failed.
*/
if (targ->flags & MPSSAS_TARGET_INREMOVAL) {
if (targ->devinfo == 0)
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
else
mpssas_set_ccbstatus(ccb, CAM_SEL_TIMEOUT);
xpt_done(ccb);
return;
}
if ((sc->mps_flags & MPS_FLAGS_SHUTDOWN) != 0) {
mps_dprint(sc, MPS_INFO, "%s shutting down\n", __func__);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
xpt_done(ccb);
return;
}
/*
* If target has a reset in progress, freeze the devq and return. The
* devq will be released when the TM reset is finished.
*/
if (targ->flags & MPSSAS_TARGET_INRESET) {
ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN;
mps_dprint(sc, MPS_INFO, "%s: Freezing devq for target ID %d\n",
__func__, targ->tid);
xpt_freeze_devq(ccb->ccb_h.path, 1);
xpt_done(ccb);
return;
}
cm = mps_alloc_command(sc);
if (cm == NULL || (sc->mps_flags & MPS_FLAGS_DIAGRESET)) {
if (cm != NULL) {
mps_free_command(sc, cm);
}
if ((sassc->flags & MPSSAS_QUEUE_FROZEN) == 0) {
xpt_freeze_simq(sassc->sim, 1);
sassc->flags |= MPSSAS_QUEUE_FROZEN;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
return;
}
req = (MPI2_SCSI_IO_REQUEST *)cm->cm_req;
bzero(req, sizeof(*req));
req->DevHandle = htole16(targ->handle);
req->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
req->MsgFlags = 0;
req->SenseBufferLowAddress = htole32(cm->cm_sense_busaddr);
req->SenseBufferLength = MPS_SENSE_LEN;
req->SGLFlags = 0;
req->ChainOffset = 0;
req->SGLOffset0 = 24; /* 32bit word offset to the SGL */
req->SGLOffset1= 0;
req->SGLOffset2= 0;
req->SGLOffset3= 0;
req->SkipCount = 0;
req->DataLength = htole32(csio->dxfer_len);
req->BidirectionalDataLength = 0;
req->IoFlags = htole16(csio->cdb_len);
req->EEDPFlags = 0;
/* Note: BiDirectional transfers are not supported */
switch (csio->ccb_h.flags & CAM_DIR_MASK) {
case CAM_DIR_IN:
mpi_control = MPI2_SCSIIO_CONTROL_READ;
cm->cm_flags |= MPS_CM_FLAGS_DATAIN;
break;
case CAM_DIR_OUT:
mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
cm->cm_flags |= MPS_CM_FLAGS_DATAOUT;
break;
case CAM_DIR_NONE:
default:
mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
break;
}
if (csio->cdb_len == 32)
mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
/*
* It looks like the hardware doesn't require an explicit tag
* number for each transaction. SAM Task Management not supported
* at the moment.
*/
switch (csio->tag_action) {
case MSG_HEAD_OF_Q_TAG:
mpi_control |= MPI2_SCSIIO_CONTROL_HEADOFQ;
break;
case MSG_ORDERED_Q_TAG:
mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
break;
case MSG_ACA_TASK:
mpi_control |= MPI2_SCSIIO_CONTROL_ACAQ;
break;
case CAM_TAG_ACTION_NONE:
case MSG_SIMPLE_Q_TAG:
default:
mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
break;
}
mpi_control |= sc->mapping_table[csio->ccb_h.target_id].TLR_bits;
req->Control = htole32(mpi_control);
if (MPS_SET_LUN(req->LUN, csio->ccb_h.target_lun) != 0) {
mps_free_command(sc, cm);
mpssas_set_ccbstatus(ccb, CAM_LUN_INVALID);
xpt_done(ccb);
return;
}
if (csio->ccb_h.flags & CAM_CDB_POINTER)
bcopy(csio->cdb_io.cdb_ptr, &req->CDB.CDB32[0], csio->cdb_len);
else
bcopy(csio->cdb_io.cdb_bytes, &req->CDB.CDB32[0],csio->cdb_len);
req->IoFlags = htole16(csio->cdb_len);
/*
* Check if EEDP is supported and enabled. If it is then check if the
* SCSI opcode could be using EEDP. If so, make sure the LUN exists and
* is formatted for EEDP support. If all of this is true, set CDB up
* for EEDP transfer.
*/
eedp_flags = op_code_prot[req->CDB.CDB32[0]];
if (sc->eedp_enabled && eedp_flags) {
SLIST_FOREACH(lun, &targ->luns, lun_link) {
if (lun->lun_id == csio->ccb_h.target_lun) {
break;
}
}
if ((lun != NULL) && (lun->eedp_formatted)) {
req->EEDPBlockSize = htole16(lun->eedp_block_size);
eedp_flags |= (MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD);
req->EEDPFlags = htole16(eedp_flags);
/*
* If CDB less than 32, fill in Primary Ref Tag with
* low 4 bytes of LBA. If CDB is 32, tag stuff is
* already there. Also, set protection bit. FreeBSD
* currently does not support CDBs bigger than 16, but
* the code doesn't hurt, and will be here for the
* future.
*/
if (csio->cdb_len != 32) {
lba_byte = (csio->cdb_len == 16) ? 6 : 2;
ref_tag_addr = (uint8_t *)&req->CDB.EEDP32.
PrimaryReferenceTag;
for (i = 0; i < 4; i++) {
*ref_tag_addr =
req->CDB.CDB32[lba_byte + i];
ref_tag_addr++;
}
req->CDB.EEDP32.PrimaryReferenceTag =
htole32(req->CDB.EEDP32.PrimaryReferenceTag);
req->CDB.EEDP32.PrimaryApplicationTagMask =
0xFFFF;
req->CDB.CDB32[1] = (req->CDB.CDB32[1] & 0x1F) |
0x20;
} else {
eedp_flags |=
MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG;
req->EEDPFlags = htole16(eedp_flags);
req->CDB.CDB32[10] = (req->CDB.CDB32[10] &
0x1F) | 0x20;
}
}
}
cm->cm_length = csio->dxfer_len;
if (cm->cm_length != 0) {
cm->cm_data = ccb;
cm->cm_flags |= MPS_CM_FLAGS_USE_CCB;
} else {
cm->cm_data = NULL;
}
cm->cm_sge = &req->SGL;
cm->cm_sglsize = (32 - 24) * 4;
cm->cm_desc.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
cm->cm_desc.SCSIIO.DevHandle = htole16(targ->handle);
cm->cm_complete = mpssas_scsiio_complete;
cm->cm_complete_data = ccb;
cm->cm_targ = targ;
cm->cm_lun = csio->ccb_h.target_lun;
cm->cm_ccb = ccb;
/*
* If HBA is a WD and the command is not for a retry, try to build a
* direct I/O message. If failed, or the command is for a retry, send
* the I/O to the IR volume itself.
*/
if (sc->WD_valid_config) {
if (ccb->ccb_h.sim_priv.entries[0].field == MPS_WD_RETRY) {
mpssas_direct_drive_io(sassc, cm, ccb);
} else {
mpssas_set_ccbstatus(ccb, CAM_REQ_INPROG);
}
}
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
if (csio->bio != NULL)
biotrack(csio->bio, __func__);
#endif
csio->ccb_h.qos.sim_data = sbinuptime();
callout_reset_sbt(&cm->cm_callout, SBT_1MS * ccb->ccb_h.timeout, 0,
mpssas_scsiio_timeout, cm, 0);
targ->issued++;
targ->outstanding++;
TAILQ_INSERT_TAIL(&targ->commands, cm, cm_link);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
mpssas_log_command(cm, MPS_XINFO, "%s cm %p ccb %p outstanding %u\n",
__func__, cm, ccb, targ->outstanding);
mps_map_command(sc, cm);
return;
}
/**
* mps_sc_failed_io_info - translated non-succesfull SCSI_IO request
*/
static void
mps_sc_failed_io_info(struct mps_softc *sc, struct ccb_scsiio *csio,
Mpi2SCSIIOReply_t *mpi_reply)
{
u32 response_info;
u8 *response_bytes;
u16 ioc_status = le16toh(mpi_reply->IOCStatus) &
MPI2_IOCSTATUS_MASK;
u8 scsi_state = mpi_reply->SCSIState;
u8 scsi_status = mpi_reply->SCSIStatus;
u32 log_info = le32toh(mpi_reply->IOCLogInfo);
const char *desc_ioc_state, *desc_scsi_status;
if (log_info == 0x31170000)
return;
desc_ioc_state = mps_describe_table(mps_iocstatus_string,
ioc_status);
desc_scsi_status = mps_describe_table(mps_scsi_status_string,
scsi_status);
mps_dprint(sc, MPS_XINFO, "\thandle(0x%04x), ioc_status(%s)(0x%04x)\n",
le16toh(mpi_reply->DevHandle), desc_ioc_state, ioc_status);
/*
*We can add more detail about underflow data here
* TO-DO
*/
mps_dprint(sc, MPS_XINFO, "\tscsi_status(%s)(0x%02x), "
"scsi_state %b\n", desc_scsi_status, scsi_status,
scsi_state, "\20" "\1AutosenseValid" "\2AutosenseFailed"
"\3NoScsiStatus" "\4Terminated" "\5Response InfoValid");
if (sc->mps_debug & MPS_XINFO &&
scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
mps_dprint(sc, MPS_XINFO, "-> Sense Buffer Data : Start :\n");
scsi_sense_print(csio);
mps_dprint(sc, MPS_XINFO, "-> Sense Buffer Data : End :\n");
}
if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
response_info = le32toh(mpi_reply->ResponseInfo);
response_bytes = (u8 *)&response_info;
mps_dprint(sc, MPS_XINFO, "response code(0x%1x): %s\n",
response_bytes[0],
mps_describe_table(mps_scsi_taskmgmt_string,
response_bytes[0]));
}
}
static void
mpssas_scsiio_complete(struct mps_softc *sc, struct mps_command *cm)
{
MPI2_SCSI_IO_REPLY *rep;
union ccb *ccb;
struct ccb_scsiio *csio;
struct mpssas_softc *sassc;
struct scsi_vpd_supported_page_list *vpd_list = NULL;
u8 *TLR_bits, TLR_on;
int dir = 0, i;
u16 alloc_len;
struct mpssas_target *target;
target_id_t target_id;
MPS_FUNCTRACE(sc);
mps_dprint(sc, MPS_TRACE,
"cm %p SMID %u ccb %p reply %p outstanding %u\n", cm,
cm->cm_desc.Default.SMID, cm->cm_ccb, cm->cm_reply,
cm->cm_targ->outstanding);
callout_stop(&cm->cm_callout);
mtx_assert(&sc->mps_mtx, MA_OWNED);
sassc = sc->sassc;
ccb = cm->cm_complete_data;
csio = &ccb->csio;
target_id = csio->ccb_h.target_id;
rep = (MPI2_SCSI_IO_REPLY *)cm->cm_reply;
/*
* XXX KDM if the chain allocation fails, does it matter if we do
* the sync and unload here? It is simpler to do it in every case,
* assuming it doesn't cause problems.
*/
if (cm->cm_data != NULL) {
if (cm->cm_flags & MPS_CM_FLAGS_DATAIN)
dir = BUS_DMASYNC_POSTREAD;
else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT)
dir = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir);
bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
}
cm->cm_targ->completed++;
cm->cm_targ->outstanding--;
TAILQ_REMOVE(&cm->cm_targ->commands, cm, cm_link);
ccb->ccb_h.status &= ~(CAM_STATUS_MASK | CAM_SIM_QUEUED);
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
if (ccb->csio.bio != NULL)
biotrack(ccb->csio.bio, __func__);
#endif
if (cm->cm_flags & MPS_CM_FLAGS_ON_RECOVERY) {
TAILQ_REMOVE(&cm->cm_targ->timedout_commands, cm, cm_recovery);
KASSERT(cm->cm_state == MPS_CM_STATE_BUSY,
("Not busy for CM_FLAGS_TIMEDOUT: %d\n", cm->cm_state));
cm->cm_flags &= ~MPS_CM_FLAGS_ON_RECOVERY;
if (cm->cm_reply != NULL)
mpssas_log_command(cm, MPS_RECOVERY,
"completed timedout cm %p ccb %p during recovery "
"ioc %x scsi %x state %x xfer %u\n",
cm, cm->cm_ccb, le16toh(rep->IOCStatus),
rep->SCSIStatus, rep->SCSIState,
le32toh(rep->TransferCount));
else
mpssas_log_command(cm, MPS_RECOVERY,
"completed timedout cm %p ccb %p during recovery\n",
cm, cm->cm_ccb);
} else if (cm->cm_targ->tm != NULL) {
if (cm->cm_reply != NULL)
mpssas_log_command(cm, MPS_RECOVERY,
"completed cm %p ccb %p during recovery "
"ioc %x scsi %x state %x xfer %u\n",
cm, cm->cm_ccb, le16toh(rep->IOCStatus),
rep->SCSIStatus, rep->SCSIState,
le32toh(rep->TransferCount));
else
mpssas_log_command(cm, MPS_RECOVERY,
"completed cm %p ccb %p during recovery\n",
cm, cm->cm_ccb);
} else if ((sc->mps_flags & MPS_FLAGS_DIAGRESET) != 0) {
mpssas_log_command(cm, MPS_RECOVERY,
"reset completed cm %p ccb %p\n",
cm, cm->cm_ccb);
}
if ((cm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
/*
* We ran into an error after we tried to map the command,
* so we're getting a callback without queueing the command
* to the hardware. So we set the status here, and it will
* be retained below. We'll go through the "fast path",
* because there can be no reply when we haven't actually
* gone out to the hardware.
*/
mpssas_set_ccbstatus(ccb, CAM_REQUEUE_REQ);
/*
* Currently the only error included in the mask is
* MPS_CM_FLAGS_CHAIN_FAILED, which means we're out of
* chain frames. We need to freeze the queue until we get
* a command that completed without this error, which will
* hopefully have some chain frames attached that we can
* use. If we wanted to get smarter about it, we would
* only unfreeze the queue in this condition when we're
* sure that we're getting some chain frames back. That's
* probably unnecessary.
*/
if ((sassc->flags & MPSSAS_QUEUE_FROZEN) == 0) {
xpt_freeze_simq(sassc->sim, 1);
sassc->flags |= MPSSAS_QUEUE_FROZEN;
mps_dprint(sc, MPS_XINFO, "Error sending command, "
"freezing SIM queue\n");
}
}
/*
* If this is a Start Stop Unit command and it was issued by the driver
* during shutdown, decrement the refcount to account for all of the
* commands that were sent. All SSU commands should be completed before
* shutdown completes, meaning SSU_refcount will be 0 after SSU_started
* is TRUE.
*/
if (sc->SSU_started && (csio->cdb_io.cdb_bytes[0] == START_STOP_UNIT)) {
mps_dprint(sc, MPS_INFO, "Decrementing SSU count.\n");
sc->SSU_refcount--;
}
/* Take the fast path to completion */
if (cm->cm_reply == NULL) {
if (mpssas_get_ccbstatus(ccb) == CAM_REQ_INPROG) {
if ((sc->mps_flags & MPS_FLAGS_DIAGRESET) != 0)
mpssas_set_ccbstatus(ccb, CAM_SCSI_BUS_RESET);
else {
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
ccb->csio.scsi_status = SCSI_STATUS_OK;
}
if (sassc->flags & MPSSAS_QUEUE_FROZEN) {
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
sassc->flags &= ~MPSSAS_QUEUE_FROZEN;
mps_dprint(sc, MPS_XINFO,
"Unfreezing SIM queue\n");
}
}
/*
* There are two scenarios where the status won't be
* CAM_REQ_CMP. The first is if MPS_CM_FLAGS_ERROR_MASK is
* set, the second is in the MPS_FLAGS_DIAGRESET above.
*/
if (mpssas_get_ccbstatus(ccb) != CAM_REQ_CMP) {
/*
* Freeze the dev queue so that commands are
* executed in the correct order after error
* recovery.
*/
ccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, /*count*/ 1);
}
mps_free_command(sc, cm);
xpt_done(ccb);
return;
}
mpssas_log_command(cm, MPS_XINFO,
"ioc %x scsi %x state %x xfer %u\n",
le16toh(rep->IOCStatus), rep->SCSIStatus, rep->SCSIState,
le32toh(rep->TransferCount));
/*
* If this is a Direct Drive I/O, reissue the I/O to the original IR
* Volume if an error occurred (normal I/O retry). Use the original
* CCB, but set a flag that this will be a retry so that it's sent to
* the original volume. Free the command but reuse the CCB.
*/
if (cm->cm_flags & MPS_CM_FLAGS_DD_IO) {
mps_free_command(sc, cm);
ccb->ccb_h.sim_priv.entries[0].field = MPS_WD_RETRY;
mpssas_action_scsiio(sassc, ccb);
return;
} else
ccb->ccb_h.sim_priv.entries[0].field = 0;
switch (le16toh(rep->IOCStatus) & MPI2_IOCSTATUS_MASK) {
case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
csio->resid = cm->cm_length - le32toh(rep->TransferCount);
/* FALLTHROUGH */
case MPI2_IOCSTATUS_SUCCESS:
case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
if ((le16toh(rep->IOCStatus) & MPI2_IOCSTATUS_MASK) ==
MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR)
mpssas_log_command(cm, MPS_XINFO, "recovered error\n");
/* Completion failed at the transport level. */
if (rep->SCSIState & (MPI2_SCSI_STATE_NO_SCSI_STATUS |
MPI2_SCSI_STATE_TERMINATED)) {
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
break;
}
/* In a modern packetized environment, an autosense failure
* implies that there's not much else that can be done to
* recover the command.
*/
if (rep->SCSIState & MPI2_SCSI_STATE_AUTOSENSE_FAILED) {
mpssas_set_ccbstatus(ccb, CAM_AUTOSENSE_FAIL);
break;
}
/*
* CAM doesn't care about SAS Response Info data, but if this is
* the state check if TLR should be done. If not, clear the
* TLR_bits for the target.
*/
if ((rep->SCSIState & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) &&
((le32toh(rep->ResponseInfo) &
MPI2_SCSI_RI_MASK_REASONCODE) ==
MPS_SCSI_RI_INVALID_FRAME)) {
sc->mapping_table[target_id].TLR_bits =
(u8)MPI2_SCSIIO_CONTROL_NO_TLR;
}
/*
* Intentionally override the normal SCSI status reporting
* for these two cases. These are likely to happen in a
* multi-initiator environment, and we want to make sure that
* CAM retries these commands rather than fail them.
*/
if ((rep->SCSIStatus == MPI2_SCSI_STATUS_COMMAND_TERMINATED) ||
(rep->SCSIStatus == MPI2_SCSI_STATUS_TASK_ABORTED)) {
mpssas_set_ccbstatus(ccb, CAM_REQ_ABORTED);
break;
}
/* Handle normal status and sense */
csio->scsi_status = rep->SCSIStatus;
if (rep->SCSIStatus == MPI2_SCSI_STATUS_GOOD)
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
else
mpssas_set_ccbstatus(ccb, CAM_SCSI_STATUS_ERROR);
if (rep->SCSIState & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
int sense_len, returned_sense_len;
returned_sense_len = min(le32toh(rep->SenseCount),
sizeof(struct scsi_sense_data));
if (returned_sense_len < ccb->csio.sense_len)
ccb->csio.sense_resid = ccb->csio.sense_len -
returned_sense_len;
else
ccb->csio.sense_resid = 0;
sense_len = min(returned_sense_len,
ccb->csio.sense_len - ccb->csio.sense_resid);
bzero(&ccb->csio.sense_data,
sizeof(ccb->csio.sense_data));
bcopy(cm->cm_sense, &ccb->csio.sense_data, sense_len);
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
}
/*
* Check if this is an INQUIRY command. If it's a VPD inquiry,
* and it's page code 0 (Supported Page List), and there is
* inquiry data, and this is for a sequential access device, and
* the device is an SSP target, and TLR is supported by the
* controller, turn the TLR_bits value ON if page 0x90 is
* supported.
*/
if ((csio->cdb_io.cdb_bytes[0] == INQUIRY) &&
(csio->cdb_io.cdb_bytes[1] & SI_EVPD) &&
(csio->cdb_io.cdb_bytes[2] == SVPD_SUPPORTED_PAGE_LIST) &&
((csio->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_VADDR) &&
(csio->data_ptr != NULL) &&
((csio->data_ptr[0] & 0x1f) == T_SEQUENTIAL) &&
(sc->control_TLR) &&
(sc->mapping_table[target_id].device_info &
MPI2_SAS_DEVICE_INFO_SSP_TARGET)) {
vpd_list = (struct scsi_vpd_supported_page_list *)
csio->data_ptr;
TLR_bits = &sc->mapping_table[target_id].TLR_bits;
*TLR_bits = (u8)MPI2_SCSIIO_CONTROL_NO_TLR;
TLR_on = (u8)MPI2_SCSIIO_CONTROL_TLR_ON;
alloc_len = ((u16)csio->cdb_io.cdb_bytes[3] << 8) +
csio->cdb_io.cdb_bytes[4];
alloc_len -= csio->resid;
for (i = 0; i < MIN(vpd_list->length, alloc_len); i++) {
if (vpd_list->list[i] == 0x90) {
*TLR_bits = TLR_on;
break;
}
}
}
/*
* If this is a SATA direct-access end device, mark it so that
* a SCSI StartStopUnit command will be sent to it when the
* driver is being shutdown.
*/
if ((csio->cdb_io.cdb_bytes[0] == INQUIRY) &&
((csio->data_ptr[0] & 0x1f) == T_DIRECT) &&
(sc->mapping_table[target_id].device_info &
MPI2_SAS_DEVICE_INFO_SATA_DEVICE) &&
((sc->mapping_table[target_id].device_info &
MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) ==
MPI2_SAS_DEVICE_INFO_END_DEVICE)) {
target = &sassc->targets[target_id];
target->supports_SSU = TRUE;
mps_dprint(sc, MPS_XINFO, "Target %d supports SSU\n",
target_id);
}
break;
case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
/*
* If devinfo is 0 this will be a volume. In that case don't
* tell CAM that the volume is not there. We want volumes to
* be enumerated until they are deleted/removed, not just
* failed.
*/
if (cm->cm_targ->devinfo == 0)
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
else
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
break;
case MPI2_IOCSTATUS_INVALID_SGL:
mps_print_scsiio_cmd(sc, cm);
mpssas_set_ccbstatus(ccb, CAM_UNREC_HBA_ERROR);
break;
case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
/*
* This is one of the responses that comes back when an I/O
* has been aborted. If it is because of a timeout that we
* initiated, just set the status to CAM_CMD_TIMEOUT.
* Otherwise set it to CAM_REQ_ABORTED. The effect on the
* command is the same (it gets retried, subject to the
* retry counter), the only difference is what gets printed
* on the console.
*/
if (cm->cm_flags & MPS_CM_FLAGS_TIMEDOUT)
mpssas_set_ccbstatus(ccb, CAM_CMD_TIMEOUT);
else
mpssas_set_ccbstatus(ccb, CAM_REQ_ABORTED);
break;
case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
/* resid is ignored for this condition */
csio->resid = 0;
mpssas_set_ccbstatus(ccb, CAM_DATA_RUN_ERR);
break;
case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
/*
* These can sometimes be transient transport-related
* errors, and sometimes persistent drive-related errors.
* We used to retry these without decrementing the retry
* count by returning CAM_REQUEUE_REQ. Unfortunately, if
* we hit a persistent drive problem that returns one of
* these error codes, we would retry indefinitely. So,
* return CAM_REQ_CMP_ERROR so that we decrement the retry
* count and avoid infinite retries. We're taking the
* potential risk of flagging false failures in the event
* of a topology-related error (e.g. a SAS expander problem
* causes a command addressed to a drive to fail), but
* avoiding getting into an infinite retry loop.
*/
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
mps_dprint(sc, MPS_INFO,
"Controller reported %s tgt %u SMID %u loginfo %x\n",
mps_describe_table(mps_iocstatus_string,
le16toh(rep->IOCStatus) & MPI2_IOCSTATUS_MASK),
target_id, cm->cm_desc.Default.SMID,
le32toh(rep->IOCLogInfo));
mps_dprint(sc, MPS_XINFO,
"SCSIStatus %x SCSIState %x xfercount %u\n",
rep->SCSIStatus, rep->SCSIState,
le32toh(rep->TransferCount));
break;
case MPI2_IOCSTATUS_INVALID_FUNCTION:
case MPI2_IOCSTATUS_INTERNAL_ERROR:
case MPI2_IOCSTATUS_INVALID_VPID:
case MPI2_IOCSTATUS_INVALID_FIELD:
case MPI2_IOCSTATUS_INVALID_STATE:
case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
default:
mpssas_log_command(cm, MPS_XINFO,
"completed ioc %x loginfo %x scsi %x state %x xfer %u\n",
le16toh(rep->IOCStatus), le32toh(rep->IOCLogInfo),
rep->SCSIStatus, rep->SCSIState,
le32toh(rep->TransferCount));
csio->resid = cm->cm_length;
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
break;
}
mps_sc_failed_io_info(sc,csio,rep);
if (sassc->flags & MPSSAS_QUEUE_FROZEN) {
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
sassc->flags &= ~MPSSAS_QUEUE_FROZEN;
mps_dprint(sc, MPS_XINFO, "Command completed, "
"unfreezing SIM queue\n");
}
if (mpssas_get_ccbstatus(ccb) != CAM_REQ_CMP) {
ccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, /*count*/ 1);
}
mps_free_command(sc, cm);
xpt_done(ccb);
}
/* All Request reached here are Endian safe */
static void
mpssas_direct_drive_io(struct mpssas_softc *sassc, struct mps_command *cm,
union ccb *ccb) {
pMpi2SCSIIORequest_t pIO_req;
struct mps_softc *sc = sassc->sc;
uint64_t virtLBA;
uint32_t physLBA, stripe_offset, stripe_unit;
uint32_t io_size, column;
uint8_t *ptrLBA, lba_idx, physLBA_byte, *CDB;
/*
* If this is a valid SCSI command (Read6, Read10, Read16, Write6,
* Write10, or Write16), build a direct I/O message. Otherwise, the I/O
* will be sent to the IR volume itself. Since Read6 and Write6 are a
* bit different than the 10/16 CDBs, handle them separately.
*/
pIO_req = (pMpi2SCSIIORequest_t)cm->cm_req;
CDB = pIO_req->CDB.CDB32;
/*
* Handle 6 byte CDBs.
*/
if ((pIO_req->DevHandle == sc->DD_dev_handle) && ((CDB[0] == READ_6) ||
(CDB[0] == WRITE_6))) {
/*
* Get the transfer size in blocks.
*/
io_size = (cm->cm_length >> sc->DD_block_exponent);
/*
* Get virtual LBA given in the CDB.
*/
virtLBA = ((uint64_t)(CDB[1] & 0x1F) << 16) |
((uint64_t)CDB[2] << 8) | (uint64_t)CDB[3];
/*
* Check that LBA range for I/O does not exceed volume's
* MaxLBA.
*/
if ((virtLBA + (uint64_t)io_size - 1) <=
sc->DD_max_lba) {
/*
* Check if the I/O crosses a stripe boundary. If not,
* translate the virtual LBA to a physical LBA and set
* the DevHandle for the PhysDisk to be used. If it
* does cross a boundary, do normal I/O. To get the
* right DevHandle to use, get the map number for the
* column, then use that map number to look up the
* DevHandle of the PhysDisk.
*/
stripe_offset = (uint32_t)virtLBA &
(sc->DD_stripe_size - 1);
if ((stripe_offset + io_size) <= sc->DD_stripe_size) {
physLBA = (uint32_t)virtLBA >>
sc->DD_stripe_exponent;
stripe_unit = physLBA / sc->DD_num_phys_disks;
column = physLBA % sc->DD_num_phys_disks;
pIO_req->DevHandle =
htole16(sc->DD_column_map[column].dev_handle);
/* ???? Is this endian safe*/
cm->cm_desc.SCSIIO.DevHandle =
pIO_req->DevHandle;
physLBA = (stripe_unit <<
sc->DD_stripe_exponent) + stripe_offset;
ptrLBA = &pIO_req->CDB.CDB32[1];
physLBA_byte = (uint8_t)(physLBA >> 16);
*ptrLBA = physLBA_byte;
ptrLBA = &pIO_req->CDB.CDB32[2];
physLBA_byte = (uint8_t)(physLBA >> 8);
*ptrLBA = physLBA_byte;
ptrLBA = &pIO_req->CDB.CDB32[3];
physLBA_byte = (uint8_t)physLBA;
*ptrLBA = physLBA_byte;
/*
* Set flag that Direct Drive I/O is
* being done.
*/
cm->cm_flags |= MPS_CM_FLAGS_DD_IO;
}
}
return;
}
/*
* Handle 10, 12 or 16 byte CDBs.
*/
if ((pIO_req->DevHandle == sc->DD_dev_handle) && ((CDB[0] == READ_10) ||
(CDB[0] == WRITE_10) || (CDB[0] == READ_16) ||
(CDB[0] == WRITE_16) || (CDB[0] == READ_12) ||
(CDB[0] == WRITE_12))) {
/*
* For 16-byte CDB's, verify that the upper 4 bytes of the CDB
* are 0. If not, this is accessing beyond 2TB so handle it in
* the else section. 10-byte and 12-byte CDB's are OK.
* FreeBSD sends very rare 12 byte READ/WRITE, but driver is
* ready to accept 12byte CDB for Direct IOs.
*/
if ((CDB[0] == READ_10 || CDB[0] == WRITE_10) ||
(CDB[0] == READ_12 || CDB[0] == WRITE_12) ||
!(CDB[2] | CDB[3] | CDB[4] | CDB[5])) {
/*
* Get the transfer size in blocks.
*/
io_size = (cm->cm_length >> sc->DD_block_exponent);
/*
* Get virtual LBA. Point to correct lower 4 bytes of
* LBA in the CDB depending on command.
*/
lba_idx = ((CDB[0] == READ_12) ||
(CDB[0] == WRITE_12) ||
(CDB[0] == READ_10) ||
(CDB[0] == WRITE_10))? 2 : 6;
virtLBA = ((uint64_t)CDB[lba_idx] << 24) |
((uint64_t)CDB[lba_idx + 1] << 16) |
((uint64_t)CDB[lba_idx + 2] << 8) |
(uint64_t)CDB[lba_idx + 3];
/*
* Check that LBA range for I/O does not exceed volume's
* MaxLBA.
*/
if ((virtLBA + (uint64_t)io_size - 1) <=
sc->DD_max_lba) {
/*
* Check if the I/O crosses a stripe boundary.
* If not, translate the virtual LBA to a
* physical LBA and set the DevHandle for the
* PhysDisk to be used. If it does cross a
* boundary, do normal I/O. To get the right
* DevHandle to use, get the map number for the
* column, then use that map number to look up
* the DevHandle of the PhysDisk.
*/
stripe_offset = (uint32_t)virtLBA &
(sc->DD_stripe_size - 1);
if ((stripe_offset + io_size) <=
sc->DD_stripe_size) {
physLBA = (uint32_t)virtLBA >>
sc->DD_stripe_exponent;
stripe_unit = physLBA /
sc->DD_num_phys_disks;
column = physLBA %
sc->DD_num_phys_disks;
pIO_req->DevHandle =
htole16(sc->DD_column_map[column].
dev_handle);
cm->cm_desc.SCSIIO.DevHandle =
pIO_req->DevHandle;
physLBA = (stripe_unit <<
sc->DD_stripe_exponent) +
stripe_offset;
ptrLBA =
&pIO_req->CDB.CDB32[lba_idx];
physLBA_byte = (uint8_t)(physLBA >> 24);
*ptrLBA = physLBA_byte;
ptrLBA =
&pIO_req->CDB.CDB32[lba_idx + 1];
physLBA_byte = (uint8_t)(physLBA >> 16);
*ptrLBA = physLBA_byte;
ptrLBA =
&pIO_req->CDB.CDB32[lba_idx + 2];
physLBA_byte = (uint8_t)(physLBA >> 8);
*ptrLBA = physLBA_byte;
ptrLBA =
&pIO_req->CDB.CDB32[lba_idx + 3];
physLBA_byte = (uint8_t)physLBA;
*ptrLBA = physLBA_byte;
/*
* Set flag that Direct Drive I/O is
* being done.
*/
cm->cm_flags |= MPS_CM_FLAGS_DD_IO;
}
}
} else {
/*
* 16-byte CDB and the upper 4 bytes of the CDB are not
* 0. Get the transfer size in blocks.
*/
io_size = (cm->cm_length >> sc->DD_block_exponent);
/*
* Get virtual LBA.
*/
virtLBA = ((uint64_t)CDB[2] << 54) |
((uint64_t)CDB[3] << 48) |
((uint64_t)CDB[4] << 40) |
((uint64_t)CDB[5] << 32) |
((uint64_t)CDB[6] << 24) |
((uint64_t)CDB[7] << 16) |
((uint64_t)CDB[8] << 8) |
(uint64_t)CDB[9];
/*
* Check that LBA range for I/O does not exceed volume's
* MaxLBA.
*/
if ((virtLBA + (uint64_t)io_size - 1) <=
sc->DD_max_lba) {
/*
* Check if the I/O crosses a stripe boundary.
* If not, translate the virtual LBA to a
* physical LBA and set the DevHandle for the
* PhysDisk to be used. If it does cross a
* boundary, do normal I/O. To get the right
* DevHandle to use, get the map number for the
* column, then use that map number to look up
* the DevHandle of the PhysDisk.
*/
stripe_offset = (uint32_t)virtLBA &
(sc->DD_stripe_size - 1);
if ((stripe_offset + io_size) <=
sc->DD_stripe_size) {
physLBA = (uint32_t)(virtLBA >>
sc->DD_stripe_exponent);
stripe_unit = physLBA /
sc->DD_num_phys_disks;
column = physLBA %
sc->DD_num_phys_disks;
pIO_req->DevHandle =
htole16(sc->DD_column_map[column].
dev_handle);
cm->cm_desc.SCSIIO.DevHandle =
pIO_req->DevHandle;
physLBA = (stripe_unit <<
sc->DD_stripe_exponent) +
stripe_offset;
/*
* Set upper 4 bytes of LBA to 0. We
* assume that the phys disks are less
* than 2 TB's in size. Then, set the
* lower 4 bytes.
*/
pIO_req->CDB.CDB32[2] = 0;
pIO_req->CDB.CDB32[3] = 0;
pIO_req->CDB.CDB32[4] = 0;
pIO_req->CDB.CDB32[5] = 0;
ptrLBA = &pIO_req->CDB.CDB32[6];
physLBA_byte = (uint8_t)(physLBA >> 24);
*ptrLBA = physLBA_byte;
ptrLBA = &pIO_req->CDB.CDB32[7];
physLBA_byte = (uint8_t)(physLBA >> 16);
*ptrLBA = physLBA_byte;
ptrLBA = &pIO_req->CDB.CDB32[8];
physLBA_byte = (uint8_t)(physLBA >> 8);
*ptrLBA = physLBA_byte;
ptrLBA = &pIO_req->CDB.CDB32[9];
physLBA_byte = (uint8_t)physLBA;
*ptrLBA = physLBA_byte;
/*
* Set flag that Direct Drive I/O is
* being done.
*/
cm->cm_flags |= MPS_CM_FLAGS_DD_IO;
}
}
}
}
}
#if __FreeBSD_version >= 900026
static void
mpssas_smpio_complete(struct mps_softc *sc, struct mps_command *cm)
{
MPI2_SMP_PASSTHROUGH_REPLY *rpl;
MPI2_SMP_PASSTHROUGH_REQUEST *req;
uint64_t sasaddr;
union ccb *ccb;
ccb = cm->cm_complete_data;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and SMP
* commands require two S/G elements only. That should be handled
* in the standard request size.
*/
if ((cm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
mps_dprint(sc, MPS_ERROR,"%s: cm_flags = %#x on SMP request!\n",
__func__, cm->cm_flags);
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
goto bailout;
}
rpl = (MPI2_SMP_PASSTHROUGH_REPLY *)cm->cm_reply;
if (rpl == NULL) {
mps_dprint(sc, MPS_ERROR, "%s: NULL cm_reply!\n", __func__);
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
goto bailout;
}
req = (MPI2_SMP_PASSTHROUGH_REQUEST *)cm->cm_req;
sasaddr = le32toh(req->SASAddress.Low);
sasaddr |= ((uint64_t)(le32toh(req->SASAddress.High))) << 32;
if ((le16toh(rpl->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS ||
rpl->SASStatus != MPI2_SASSTATUS_SUCCESS) {
mps_dprint(sc, MPS_XINFO, "%s: IOCStatus %04x SASStatus %02x\n",
__func__, le16toh(rpl->IOCStatus), rpl->SASStatus);
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
goto bailout;
}
mps_dprint(sc, MPS_XINFO, "%s: SMP request to SAS address "
"%#jx completed successfully\n", __func__,
(uintmax_t)sasaddr);
if (ccb->smpio.smp_response[2] == SMP_FR_ACCEPTED)
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
else
mpssas_set_ccbstatus(ccb, CAM_SMP_STATUS_ERROR);
bailout:
/*
* We sync in both directions because we had DMAs in the S/G list
* in both directions.
*/
bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
mps_free_command(sc, cm);
xpt_done(ccb);
}
static void
mpssas_send_smpcmd(struct mpssas_softc *sassc, union ccb *ccb, uint64_t sasaddr)
{
struct mps_command *cm;
uint8_t *request, *response;
MPI2_SMP_PASSTHROUGH_REQUEST *req;
struct mps_softc *sc;
int error;
sc = sassc->sc;
error = 0;
/*
* XXX We don't yet support physical addresses here.
*/
switch ((ccb->ccb_h.flags & CAM_DATA_MASK)) {
case CAM_DATA_PADDR:
case CAM_DATA_SG_PADDR:
mps_dprint(sc, MPS_ERROR,
"%s: physical addresses not supported\n", __func__);
mpssas_set_ccbstatus(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
return;
case CAM_DATA_SG:
/*
* The chip does not support more than one buffer for the
* request or response.
*/
if ((ccb->smpio.smp_request_sglist_cnt > 1)
|| (ccb->smpio.smp_response_sglist_cnt > 1)) {
mps_dprint(sc, MPS_ERROR,
"%s: multiple request or response "
"buffer segments not supported for SMP\n",
__func__);
mpssas_set_ccbstatus(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
return;
}
/*
* The CAM_SCATTER_VALID flag was originally implemented
* for the XPT_SCSI_IO CCB, which only has one data pointer.
* We have two. So, just take that flag to mean that we
* might have S/G lists, and look at the S/G segment count
* to figure out whether that is the case for each individual
* buffer.
*/
if (ccb->smpio.smp_request_sglist_cnt != 0) {
bus_dma_segment_t *req_sg;
req_sg = (bus_dma_segment_t *)ccb->smpio.smp_request;
request = (uint8_t *)(uintptr_t)req_sg[0].ds_addr;
} else
request = ccb->smpio.smp_request;
if (ccb->smpio.smp_response_sglist_cnt != 0) {
bus_dma_segment_t *rsp_sg;
rsp_sg = (bus_dma_segment_t *)ccb->smpio.smp_response;
response = (uint8_t *)(uintptr_t)rsp_sg[0].ds_addr;
} else
response = ccb->smpio.smp_response;
break;
case CAM_DATA_VADDR:
request = ccb->smpio.smp_request;
response = ccb->smpio.smp_response;
break;
default:
mpssas_set_ccbstatus(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
return;
}
cm = mps_alloc_command(sc);
if (cm == NULL) {
mps_dprint(sc, MPS_ERROR,
"%s: cannot allocate command\n", __func__);
mpssas_set_ccbstatus(ccb, CAM_RESRC_UNAVAIL);
xpt_done(ccb);
return;
}
req = (MPI2_SMP_PASSTHROUGH_REQUEST *)cm->cm_req;
bzero(req, sizeof(*req));
req->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
/* Allow the chip to use any route to this SAS address. */
req->PhysicalPort = 0xff;
req->RequestDataLength = htole16(ccb->smpio.smp_request_len);
req->SGLFlags =
MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE | MPI2_SGLFLAGS_SGL_TYPE_MPI;
mps_dprint(sc, MPS_XINFO, "%s: sending SMP request to SAS "
"address %#jx\n", __func__, (uintmax_t)sasaddr);
mpi_init_sge(cm, req, &req->SGL);
/*
* Set up a uio to pass into mps_map_command(). This allows us to
* do one map command, and one busdma call in there.
*/
cm->cm_uio.uio_iov = cm->cm_iovec;
cm->cm_uio.uio_iovcnt = 2;
cm->cm_uio.uio_segflg = UIO_SYSSPACE;
/*
* The read/write flag isn't used by busdma, but set it just in
* case. This isn't exactly accurate, either, since we're going in
* both directions.
*/
cm->cm_uio.uio_rw = UIO_WRITE;
cm->cm_iovec[0].iov_base = request;
cm->cm_iovec[0].iov_len = le16toh(req->RequestDataLength);
cm->cm_iovec[1].iov_base = response;
cm->cm_iovec[1].iov_len = ccb->smpio.smp_response_len;
cm->cm_uio.uio_resid = cm->cm_iovec[0].iov_len +
cm->cm_iovec[1].iov_len;
/*
* Trigger a warning message in mps_data_cb() for the user if we
* wind up exceeding two S/G segments. The chip expects one
* segment for the request and another for the response.
*/
cm->cm_max_segs = 2;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_complete = mpssas_smpio_complete;
cm->cm_complete_data = ccb;
/*
* Tell the mapping code that we're using a uio, and that this is
* an SMP passthrough request. There is a little special-case
* logic there (in mps_data_cb()) to handle the bidirectional
* transfer.
*/
cm->cm_flags |= MPS_CM_FLAGS_USE_UIO | MPS_CM_FLAGS_SMP_PASS |
MPS_CM_FLAGS_DATAIN | MPS_CM_FLAGS_DATAOUT;
/* The chip data format is little endian. */
req->SASAddress.High = htole32(sasaddr >> 32);
req->SASAddress.Low = htole32(sasaddr);
/*
* XXX Note that we don't have a timeout/abort mechanism here.
* From the manual, it looks like task management requests only
* work for SCSI IO and SATA passthrough requests. We may need to
* have a mechanism to retry requests in the event of a chip reset
* at least. Hopefully the chip will insure that any errors short
* of that are relayed back to the driver.
*/
error = mps_map_command(sc, cm);
if ((error != 0) && (error != EINPROGRESS)) {
mps_dprint(sc, MPS_ERROR,
"%s: error %d returned from mps_map_command()\n",
__func__, error);
goto bailout_error;
}
return;
bailout_error:
mps_free_command(sc, cm);
mpssas_set_ccbstatus(ccb, CAM_RESRC_UNAVAIL);
xpt_done(ccb);
return;
}
static void
mpssas_action_smpio(struct mpssas_softc *sassc, union ccb *ccb)
{
struct mps_softc *sc;
struct mpssas_target *targ;
uint64_t sasaddr = 0;
sc = sassc->sc;
/*
* Make sure the target exists.
*/
KASSERT(ccb->ccb_h.target_id < sassc->maxtargets,
("Target %d out of bounds in XPT_SMP_IO\n", ccb->ccb_h.target_id));
targ = &sassc->targets[ccb->ccb_h.target_id];
if (targ->handle == 0x0) {
mps_dprint(sc, MPS_ERROR,
"%s: target %d does not exist!\n", __func__,
ccb->ccb_h.target_id);
mpssas_set_ccbstatus(ccb, CAM_SEL_TIMEOUT);
xpt_done(ccb);
return;
}
/*
* If this device has an embedded SMP target, we'll talk to it
* directly.
* figure out what the expander's address is.
*/
if ((targ->devinfo & MPI2_SAS_DEVICE_INFO_SMP_TARGET) != 0)
sasaddr = targ->sasaddr;
/*
* If we don't have a SAS address for the expander yet, try
* grabbing it from the page 0x83 information cached in the
* transport layer for this target. LSI expanders report the
* expander SAS address as the port-associated SAS address in
* Inquiry VPD page 0x83. Maxim expanders don't report it in page
* 0x83.
*
* XXX KDM disable this for now, but leave it commented out so that
* it is obvious that this is another possible way to get the SAS
* address.
*
* The parent handle method below is a little more reliable, and
* the other benefit is that it works for devices other than SES
* devices. So you can send a SMP request to a da(4) device and it
* will get routed to the expander that device is attached to.
* (Assuming the da(4) device doesn't contain an SMP target...)
*/
#if 0
if (sasaddr == 0)
sasaddr = xpt_path_sas_addr(ccb->ccb_h.path);
#endif
/*
* If we still don't have a SAS address for the expander, look for
* the parent device of this device, which is probably the expander.
*/
if (sasaddr == 0) {
#ifdef OLD_MPS_PROBE
struct mpssas_target *parent_target;
#endif
if (targ->parent_handle == 0x0) {
mps_dprint(sc, MPS_ERROR,
"%s: handle %d does not have a valid "
"parent handle!\n", __func__, targ->handle);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
goto bailout;
}
#ifdef OLD_MPS_PROBE
parent_target = mpssas_find_target_by_handle(sassc, 0,
targ->parent_handle);
if (parent_target == NULL) {
mps_dprint(sc, MPS_ERROR,
"%s: handle %d does not have a valid "
"parent target!\n", __func__, targ->handle);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
goto bailout;
}
if ((parent_target->devinfo &
MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0) {
mps_dprint(sc, MPS_ERROR,
"%s: handle %d parent %d does not "
"have an SMP target!\n", __func__,
targ->handle, parent_target->handle);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
goto bailout;
}
sasaddr = parent_target->sasaddr;
#else /* OLD_MPS_PROBE */
if ((targ->parent_devinfo &
MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0) {
mps_dprint(sc, MPS_ERROR,
"%s: handle %d parent %d does not "
"have an SMP target!\n", __func__,
targ->handle, targ->parent_handle);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
goto bailout;
}
if (targ->parent_sasaddr == 0x0) {
mps_dprint(sc, MPS_ERROR,
"%s: handle %d parent handle %d does "
"not have a valid SAS address!\n",
__func__, targ->handle, targ->parent_handle);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
goto bailout;
}
sasaddr = targ->parent_sasaddr;
#endif /* OLD_MPS_PROBE */
}
if (sasaddr == 0) {
mps_dprint(sc, MPS_INFO,
"%s: unable to find SAS address for handle %d\n",
__func__, targ->handle);
mpssas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
goto bailout;
}
mpssas_send_smpcmd(sassc, ccb, sasaddr);
return;
bailout:
xpt_done(ccb);
}
#endif //__FreeBSD_version >= 900026
static void
mpssas_action_resetdev(struct mpssas_softc *sassc, union ccb *ccb)
{
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
struct mps_softc *sc;
struct mps_command *tm;
struct mpssas_target *targ;
MPS_FUNCTRACE(sassc->sc);
mtx_assert(&sassc->sc->mps_mtx, MA_OWNED);
KASSERT(ccb->ccb_h.target_id < sassc->maxtargets,
("Target %d out of bounds in XPT_RESET_DEV\n",
ccb->ccb_h.target_id));
sc = sassc->sc;
tm = mpssas_alloc_tm(sc);
if (tm == NULL) {
mps_dprint(sc, MPS_ERROR,
"command alloc failure in mpssas_action_resetdev\n");
mpssas_set_ccbstatus(ccb, CAM_RESRC_UNAVAIL);
xpt_done(ccb);
return;
}
targ = &sassc->targets[ccb->ccb_h.target_id];
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
req->DevHandle = htole16(targ->handle);
req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
/* SAS Hard Link Reset / SATA Link Reset */
req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
tm->cm_data = NULL;
tm->cm_complete = mpssas_resetdev_complete;
tm->cm_complete_data = ccb;
tm->cm_targ = targ;
mpssas_prepare_for_tm(sc, tm, targ, CAM_LUN_WILDCARD);
mps_map_command(sc, tm);
}
static void
mpssas_resetdev_complete(struct mps_softc *sc, struct mps_command *tm)
{
MPI2_SCSI_TASK_MANAGE_REPLY *resp;
union ccb *ccb;
MPS_FUNCTRACE(sc);
mtx_assert(&sc->mps_mtx, MA_OWNED);
resp = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
ccb = tm->cm_complete_data;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and
* task management commands don't have S/G lists.
*/
if ((tm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
MPI2_SCSI_TASK_MANAGE_REQUEST *req;
req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
mps_dprint(sc, MPS_ERROR,
"%s: cm_flags = %#x for reset of handle %#04x! "
"This should not happen!\n", __func__, tm->cm_flags,
req->DevHandle);
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
goto bailout;
}
mps_dprint(sc, MPS_XINFO,
"%s: IOCStatus = 0x%x ResponseCode = 0x%x\n", __func__,
le16toh(resp->IOCStatus), le32toh(resp->ResponseCode));
if (le32toh(resp->ResponseCode) == MPI2_SCSITASKMGMT_RSP_TM_COMPLETE) {
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP);
mpssas_announce_reset(sc, AC_SENT_BDR, tm->cm_targ->tid,
CAM_LUN_WILDCARD);
}
else
mpssas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
bailout:
mpssas_free_tm(sc, tm);
xpt_done(ccb);
}
static void
mpssas_poll(struct cam_sim *sim)
{
struct mpssas_softc *sassc;
sassc = cam_sim_softc(sim);
if (sassc->sc->mps_debug & MPS_TRACE) {
/* frequent debug messages during a panic just slow
* everything down too much.
*/
mps_printf(sassc->sc, "%s clearing MPS_TRACE\n", __func__);
sassc->sc->mps_debug &= ~MPS_TRACE;
}
mps_intr_locked(sassc->sc);
}
static void
mpssas_async(void *callback_arg, uint32_t code, struct cam_path *path,
void *arg)
{
struct mps_softc *sc;
sc = (struct mps_softc *)callback_arg;
switch (code) {
#if (__FreeBSD_version >= 1000006) || \
((__FreeBSD_version >= 901503) && (__FreeBSD_version < 1000000))
case AC_ADVINFO_CHANGED: {
struct mpssas_target *target;
struct mpssas_softc *sassc;
struct scsi_read_capacity_data_long rcap_buf;
struct ccb_dev_advinfo cdai;
struct mpssas_lun *lun;
lun_id_t lunid;
int found_lun;
uintptr_t buftype;
buftype = (uintptr_t)arg;
found_lun = 0;
sassc = sc->sassc;
/*
* We're only interested in read capacity data changes.
*/
if (buftype != CDAI_TYPE_RCAPLONG)
break;
/*
* We should have a handle for this, but check to make sure.
*/
KASSERT(xpt_path_target_id(path) < sassc->maxtargets,
("Target %d out of bounds in mpssas_async\n",
xpt_path_target_id(path)));
target = &sassc->targets[xpt_path_target_id(path)];
if (target->handle == 0)
break;
lunid = xpt_path_lun_id(path);
SLIST_FOREACH(lun, &target->luns, lun_link) {
if (lun->lun_id == lunid) {
found_lun = 1;
break;
}
}
if (found_lun == 0) {
lun = malloc(sizeof(struct mpssas_lun), M_MPT2,
M_NOWAIT | M_ZERO);
if (lun == NULL) {
mps_dprint(sc, MPS_ERROR, "Unable to alloc "
"LUN for EEDP support.\n");
break;
}
lun->lun_id = lunid;
SLIST_INSERT_HEAD(&target->luns, lun, lun_link);
}
bzero(&rcap_buf, sizeof(rcap_buf));
xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
cdai.ccb_h.flags = CAM_DIR_IN;
cdai.buftype = CDAI_TYPE_RCAPLONG;
#if (__FreeBSD_version >= 1100061) || \
((__FreeBSD_version >= 1001510) && (__FreeBSD_version < 1100000))
cdai.flags = CDAI_FLAG_NONE;
#else
cdai.flags = 0;
#endif
cdai.bufsiz = sizeof(rcap_buf);
cdai.buf = (uint8_t *)&rcap_buf;
xpt_action((union ccb *)&cdai);
if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
cam_release_devq(cdai.ccb_h.path,
0, 0, 0, FALSE);
if ((mpssas_get_ccbstatus((union ccb *)&cdai) == CAM_REQ_CMP)
&& (rcap_buf.prot & SRC16_PROT_EN)) {
switch (rcap_buf.prot & SRC16_P_TYPE) {
case SRC16_PTYPE_1:
case SRC16_PTYPE_3:
lun->eedp_formatted = TRUE;
lun->eedp_block_size =
scsi_4btoul(rcap_buf.length);
break;
case SRC16_PTYPE_2:
default:
lun->eedp_formatted = FALSE;
lun->eedp_block_size = 0;
break;
}
} else {
lun->eedp_formatted = FALSE;
lun->eedp_block_size = 0;
}
break;
}
#else
case AC_FOUND_DEVICE: {
struct ccb_getdev *cgd;
cgd = arg;
mpssas_check_eedp(sc, path, cgd);
break;
}
#endif
default:
break;
}
}
#if (__FreeBSD_version < 901503) || \
((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000006))
static void
mpssas_check_eedp(struct mps_softc *sc, struct cam_path *path,
struct ccb_getdev *cgd)
{
struct mpssas_softc *sassc = sc->sassc;
struct ccb_scsiio *csio;
struct scsi_read_capacity_16 *scsi_cmd;
struct scsi_read_capacity_eedp *rcap_buf;
path_id_t pathid;
target_id_t targetid;
lun_id_t lunid;
union ccb *ccb;
struct cam_path *local_path;
struct mpssas_target *target;
struct mpssas_lun *lun;
uint8_t found_lun;
char path_str[64];
sassc = sc->sassc;
pathid = cam_sim_path(sassc->sim);
targetid = xpt_path_target_id(path);
lunid = xpt_path_lun_id(path);
KASSERT(targetid < sassc->maxtargets,
("Target %d out of bounds in mpssas_check_eedp\n",
targetid));
target = &sassc->targets[targetid];
if (target->handle == 0x0)
return;
/*
* Determine if the device is EEDP capable.
*
* If this flag is set in the inquiry data,
* the device supports protection information,
* and must support the 16 byte read
* capacity command, otherwise continue without
* sending read cap 16
*/
if ((cgd->inq_data.spc3_flags & SPC3_SID_PROTECT) == 0)
return;
/*
* Issue a READ CAPACITY 16 command. This info
* is used to determine if the LUN is formatted
* for EEDP support.
*/
ccb = xpt_alloc_ccb_nowait();
if (ccb == NULL) {
mps_dprint(sc, MPS_ERROR, "Unable to alloc CCB "
"for EEDP support.\n");
return;
}
if (xpt_create_path(&local_path, xpt_periph,
pathid, targetid, lunid) != CAM_REQ_CMP) {
mps_dprint(sc, MPS_ERROR, "Unable to create "
"path for EEDP support\n");
xpt_free_ccb(ccb);
return;
}
/*
* If LUN is already in list, don't create a new
* one.
*/
found_lun = FALSE;
SLIST_FOREACH(lun, &target->luns, lun_link) {
if (lun->lun_id == lunid) {
found_lun = TRUE;
break;
}
}
if (!found_lun) {
lun = malloc(sizeof(struct mpssas_lun), M_MPT2,
M_NOWAIT | M_ZERO);
if (lun == NULL) {
mps_dprint(sc, MPS_ERROR,
"Unable to alloc LUN for EEDP support.\n");
xpt_free_path(local_path);
xpt_free_ccb(ccb);
return;
}
lun->lun_id = lunid;
SLIST_INSERT_HEAD(&target->luns, lun,
lun_link);
}
xpt_path_string(local_path, path_str, sizeof(path_str));
mps_dprint(sc, MPS_INFO, "Sending read cap: path %s handle %d\n",
path_str, target->handle);
/*
* Issue a READ CAPACITY 16 command for the LUN.
* The mpssas_read_cap_done function will load
* the read cap info into the LUN struct.
*/
rcap_buf = malloc(sizeof(struct scsi_read_capacity_eedp),
M_MPT2, M_NOWAIT | M_ZERO);
if (rcap_buf == NULL) {
mps_dprint(sc, MPS_FAULT,
"Unable to alloc read capacity buffer for EEDP support.\n");
xpt_free_path(ccb->ccb_h.path);
xpt_free_ccb(ccb);
return;
}
xpt_setup_ccb(&ccb->ccb_h, local_path, CAM_PRIORITY_XPT);
csio = &ccb->csio;
csio->ccb_h.func_code = XPT_SCSI_IO;
csio->ccb_h.flags = CAM_DIR_IN;
csio->ccb_h.retry_count = 4;
csio->ccb_h.cbfcnp = mpssas_read_cap_done;
csio->ccb_h.timeout = 60000;
csio->data_ptr = (uint8_t *)rcap_buf;
csio->dxfer_len = sizeof(struct scsi_read_capacity_eedp);
csio->sense_len = MPS_SENSE_LEN;
csio->cdb_len = sizeof(*scsi_cmd);
csio->tag_action = MSG_SIMPLE_Q_TAG;
scsi_cmd = (struct scsi_read_capacity_16 *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = 0x9E;
scsi_cmd->service_action = SRC16_SERVICE_ACTION;
((uint8_t *)scsi_cmd)[13] = sizeof(struct scsi_read_capacity_eedp);
ccb->ccb_h.ppriv_ptr1 = sassc;
xpt_action(ccb);
}
static void
mpssas_read_cap_done(struct cam_periph *periph, union ccb *done_ccb)
{
struct mpssas_softc *sassc;
struct mpssas_target *target;
struct mpssas_lun *lun;
struct scsi_read_capacity_eedp *rcap_buf;
if (done_ccb == NULL)
return;
/* Driver need to release devq, it Scsi command is
* generated by driver internally.
* Currently there is a single place where driver
* calls scsi command internally. In future if driver
* calls more scsi command internally, it needs to release
* devq internally, since those command will not go back to
* cam_periph.
*/
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) ) {
done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
xpt_release_devq(done_ccb->ccb_h.path,
/*count*/ 1, /*run_queue*/TRUE);
}
rcap_buf = (struct scsi_read_capacity_eedp *)done_ccb->csio.data_ptr;
/*
* Get the LUN ID for the path and look it up in the LUN list for the
* target.
*/
sassc = (struct mpssas_softc *)done_ccb->ccb_h.ppriv_ptr1;
KASSERT(done_ccb->ccb_h.target_id < sassc->maxtargets,
("Target %d out of bounds in mpssas_read_cap_done\n",
done_ccb->ccb_h.target_id));
target = &sassc->targets[done_ccb->ccb_h.target_id];
SLIST_FOREACH(lun, &target->luns, lun_link) {
if (lun->lun_id != done_ccb->ccb_h.target_lun)
continue;
/*
* Got the LUN in the target's LUN list. Fill it in
* with EEDP info. If the READ CAP 16 command had some
* SCSI error (common if command is not supported), mark
* the lun as not supporting EEDP and set the block size
* to 0.
*/
if ((mpssas_get_ccbstatus(done_ccb) != CAM_REQ_CMP)
|| (done_ccb->csio.scsi_status != SCSI_STATUS_OK)) {
lun->eedp_formatted = FALSE;
lun->eedp_block_size = 0;
break;
}
if (rcap_buf->protect & 0x01) {
mps_dprint(sassc->sc, MPS_INFO, "LUN %d for "
"target ID %d is formatted for EEDP "
"support.\n", done_ccb->ccb_h.target_lun,
done_ccb->ccb_h.target_id);
lun->eedp_formatted = TRUE;
lun->eedp_block_size = scsi_4btoul(rcap_buf->length);
}
break;
}
// Finished with this CCB and path.
free(rcap_buf, M_MPT2);
xpt_free_path(done_ccb->ccb_h.path);
xpt_free_ccb(done_ccb);
}
#endif /* (__FreeBSD_version < 901503) || \
((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000006)) */
/*
* Set the INRESET flag for this target so that no I/O will be sent to
* the target until the reset has completed. If an I/O request does
* happen, the devq will be frozen. The CCB holds the path which is
* used to release the devq. The devq is released and the CCB is freed
* when the TM completes.
*/
void
mpssas_prepare_for_tm(struct mps_softc *sc, struct mps_command *tm,
struct mpssas_target *target, lun_id_t lun_id)
{
union ccb *ccb;
path_id_t path_id;
ccb = xpt_alloc_ccb_nowait();
if (ccb) {
path_id = cam_sim_path(sc->sassc->sim);
if (xpt_create_path(&ccb->ccb_h.path, xpt_periph, path_id,
target->tid, lun_id) != CAM_REQ_CMP) {
xpt_free_ccb(ccb);
} else {
tm->cm_ccb = ccb;
tm->cm_targ = target;
target->flags |= MPSSAS_TARGET_INRESET;
}
}
}
int
mpssas_startup(struct mps_softc *sc)
{
/*
* Send the port enable message and set the wait_for_port_enable flag.
* This flag helps to keep the simq frozen until all discovery events
* are processed.
*/
sc->wait_for_port_enable = 1;
mpssas_send_portenable(sc);
return (0);
}
static int
mpssas_send_portenable(struct mps_softc *sc)
{
MPI2_PORT_ENABLE_REQUEST *request;
struct mps_command *cm;
MPS_FUNCTRACE(sc);
if ((cm = mps_alloc_command(sc)) == NULL)
return (EBUSY);
request = (MPI2_PORT_ENABLE_REQUEST *)cm->cm_req;
request->Function = MPI2_FUNCTION_PORT_ENABLE;
request->MsgFlags = 0;
request->VP_ID = 0;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_complete = mpssas_portenable_complete;
cm->cm_data = NULL;
cm->cm_sge = NULL;
mps_map_command(sc, cm);
mps_dprint(sc, MPS_XINFO,
"mps_send_portenable finished cm %p req %p complete %p\n",
cm, cm->cm_req, cm->cm_complete);
return (0);
}
static void
mpssas_portenable_complete(struct mps_softc *sc, struct mps_command *cm)
{
MPI2_PORT_ENABLE_REPLY *reply;
struct mpssas_softc *sassc;
MPS_FUNCTRACE(sc);
sassc = sc->sassc;
/*
* Currently there should be no way we can hit this case. It only
* happens when we have a failure to allocate chain frames, and
* port enable commands don't have S/G lists.
*/
if ((cm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
mps_dprint(sc, MPS_ERROR, "%s: cm_flags = %#x for port enable! "
"This should not happen!\n", __func__, cm->cm_flags);
}
reply = (MPI2_PORT_ENABLE_REPLY *)cm->cm_reply;
if (reply == NULL)
mps_dprint(sc, MPS_FAULT, "Portenable NULL reply\n");
else if (le16toh(reply->IOCStatus & MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS)
mps_dprint(sc, MPS_FAULT, "Portenable failed\n");
mps_free_command(sc, cm);
/*
* Get WarpDrive info after discovery is complete but before the scan
* starts. At this point, all devices are ready to be exposed to the
* OS. If devices should be hidden instead, take them out of the
* 'targets' array before the scan. The devinfo for a disk will have
* some info and a volume's will be 0. Use that to remove disks.
*/
mps_wd_config_pages(sc);
/*
* Done waiting for port enable to complete. Decrement the refcount.
* If refcount is 0, discovery is complete and a rescan of the bus can
* take place. Since the simq was explicitly frozen before port
* enable, it must be explicitly released here to keep the
* freeze/release count in sync.
*/
sc->wait_for_port_enable = 0;
sc->port_enable_complete = 1;
wakeup(&sc->port_enable_complete);
mpssas_startup_decrement(sassc);
}
int
mpssas_check_id(struct mpssas_softc *sassc, int id)
{
struct mps_softc *sc = sassc->sc;
char *ids;
char *name;
ids = &sc->exclude_ids[0];
while((name = strsep(&ids, ",")) != NULL) {
if (name[0] == '\0')
continue;
if (strtol(name, NULL, 0) == (long)id)
return (1);
}
return (0);
}
void
mpssas_realloc_targets(struct mps_softc *sc, int maxtargets)
{
struct mpssas_softc *sassc;
struct mpssas_lun *lun, *lun_tmp;
struct mpssas_target *targ;
int i;
sassc = sc->sassc;
/*
* The number of targets is based on IOC Facts, so free all of
* the allocated LUNs for each target and then the target buffer
* itself.
*/
for (i=0; i< maxtargets; i++) {
targ = &sassc->targets[i];
SLIST_FOREACH_SAFE(lun, &targ->luns, lun_link, lun_tmp) {
free(lun, M_MPT2);
}
}
free(sassc->targets, M_MPT2);
sassc->targets = malloc(sizeof(struct mpssas_target) * maxtargets,
M_MPT2, M_WAITOK|M_ZERO);
if (!sassc->targets) {
panic("%s failed to alloc targets with error %d\n",
__func__, ENOMEM);
}
}
Reference in New Issue View Git Blame Copy Permalink