freebsd-nq/sys/dev/isp/isp_freebsd.c
Julian Elischer b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00

2838 lines
74 KiB
C

/* $FreeBSD$ */
/*
* Platform (FreeBSD) dependent common attachment code for Qlogic adapters.
*
* Copyright (c) 1997, 1998, 1999, 2000, 2001 by Matthew Jacob
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <dev/isp/isp_freebsd.h>
#include <sys/unistd.h>
#include <sys/kthread.h>
#include <machine/stdarg.h> /* for use by isp_prt below */
#include <sys/conf.h>
#include <sys/ioccom.h>
#include <dev/isp/isp_ioctl.h>
static d_ioctl_t ispioctl;
static void isp_intr_enable(void *);
static void isp_cam_async(void *, u_int32_t, struct cam_path *, void *);
static void isp_poll(struct cam_sim *);
#if 0
static void isp_relsim(void *);
#endif
static timeout_t isp_watchdog;
static void isp_kthread(void *);
static void isp_action(struct cam_sim *, union ccb *);
#define ISP_CDEV_MAJOR 248
static struct cdevsw isp_cdevsw = {
/* open */ nullopen,
/* close */ nullclose,
/* read */ noread,
/* write */ nowrite,
/* ioctl */ ispioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "isp",
/* maj */ ISP_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ D_TAPE,
};
static struct ispsoftc *isplist = NULL;
void
isp_attach(struct ispsoftc *isp)
{
int primary, secondary;
struct ccb_setasync csa;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
/*
* Establish (in case of 12X0) which bus is the primary.
*/
primary = 0;
secondary = 1;
/*
* Create the device queue for our SIM(s).
*/
devq = cam_simq_alloc(isp->isp_maxcmds);
if (devq == NULL) {
return;
}
/*
* Construct our SIM entry.
*/
ISPLOCK_2_CAMLOCK(isp);
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
device_get_unit(isp->isp_dev), 1, isp->isp_maxcmds, devq);
if (sim == NULL) {
cam_simq_free(devq);
CAMLOCK_2_ISPLOCK(isp);
return;
}
CAMLOCK_2_ISPLOCK(isp);
isp->isp_osinfo.ehook.ich_func = isp_intr_enable;
isp->isp_osinfo.ehook.ich_arg = isp;
ISPLOCK_2_CAMLOCK(isp);
if (config_intrhook_establish(&isp->isp_osinfo.ehook) != 0) {
cam_sim_free(sim, TRUE);
CAMLOCK_2_ISPLOCK(isp);
isp_prt(isp, ISP_LOGERR,
"could not establish interrupt enable hook");
return;
}
if (xpt_bus_register(sim, primary) != CAM_SUCCESS) {
cam_sim_free(sim, TRUE);
CAMLOCK_2_ISPLOCK(isp);
return;
}
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
return;
}
xpt_setup_ccb(&csa.ccb_h, path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_cam_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
CAMLOCK_2_ISPLOCK(isp);
isp->isp_sim = sim;
isp->isp_path = path;
/*
* Create a kernel thread for fibre channel instances. We
* don't have dual channel FC cards.
*/
if (IS_FC(isp)) {
ISPLOCK_2_CAMLOCK(isp);
/* XXX: LOCK VIOLATION */
cv_init(&isp->isp_osinfo.kthread_cv, "isp_kthread_cv");
if (kthread_create(isp_kthread, isp, &isp->isp_osinfo.kproc,
RFHIGHPID, "%s: fc_thrd",
device_get_nameunit(isp->isp_dev))) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
isp_prt(isp, ISP_LOGERR, "could not create kthread");
return;
}
CAMLOCK_2_ISPLOCK(isp);
}
/*
* If we have a second channel, construct SIM entry for that.
*/
if (IS_DUALBUS(isp)) {
ISPLOCK_2_CAMLOCK(isp);
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
device_get_unit(isp->isp_dev), 1, isp->isp_maxcmds, devq);
if (sim == NULL) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_simq_free(devq);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
return;
}
if (xpt_bus_register(sim, secondary) != CAM_SUCCESS) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
return;
}
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
return;
}
xpt_setup_ccb(&csa.ccb_h, path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_cam_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
CAMLOCK_2_ISPLOCK(isp);
isp->isp_sim2 = sim;
isp->isp_path2 = path;
}
#ifdef ISP_TARGET_MODE
cv_init(&isp->isp_osinfo.tgtcv0[0], "isp_tgcv0a");
cv_init(&isp->isp_osinfo.tgtcv0[1], "isp_tgcv0b");
cv_init(&isp->isp_osinfo.tgtcv1[0], "isp_tgcv1a");
cv_init(&isp->isp_osinfo.tgtcv1[1], "isp_tgcv1b");
#endif
/*
* Create device nodes
*/
(void) make_dev(&isp_cdevsw, device_get_unit(isp->isp_dev), UID_ROOT,
GID_OPERATOR, 0600, "%s", device_get_nameunit(isp->isp_dev));
if (isp->isp_role != ISP_ROLE_NONE) {
isp->isp_state = ISP_RUNSTATE;
ENABLE_INTS(isp);
}
if (isplist == NULL) {
isplist = isp;
} else {
struct ispsoftc *tmp = isplist;
while (tmp->isp_osinfo.next) {
tmp = tmp->isp_osinfo.next;
}
tmp->isp_osinfo.next = isp;
}
}
static int
ispioctl(dev_t dev, u_long cmd, caddr_t addr, int flags, struct thread *td)
{
struct ispsoftc *isp;
int retval = ENOTTY;
isp = isplist;
while (isp) {
if (minor(dev) == device_get_unit(isp->isp_dev)) {
break;
}
isp = isp->isp_osinfo.next;
}
if (isp == NULL)
return (ENXIO);
switch (cmd) {
case ISP_SDBLEV:
{
int olddblev = isp->isp_dblev;
isp->isp_dblev = *(int *)addr;
*(int *)addr = olddblev;
retval = 0;
break;
}
case ISP_RESETHBA:
ISP_LOCK(isp);
isp_reinit(isp);
ISP_UNLOCK(isp);
retval = 0;
break;
case ISP_FC_RESCAN:
if (IS_FC(isp)) {
ISP_LOCK(isp);
if (isp_fc_runstate(isp, 5 * 1000000)) {
retval = EIO;
} else {
retval = 0;
}
ISP_UNLOCK(isp);
}
break;
case ISP_FC_LIP:
if (IS_FC(isp)) {
ISP_LOCK(isp);
if (isp_control(isp, ISPCTL_SEND_LIP, 0)) {
retval = EIO;
} else {
retval = 0;
}
ISP_UNLOCK(isp);
}
break;
case ISP_FC_GETDINFO:
{
struct isp_fc_device *ifc = (struct isp_fc_device *) addr;
struct lportdb *lp;
if (ifc->loopid < 0 || ifc->loopid >= MAX_FC_TARG) {
retval = EINVAL;
break;
}
ISP_LOCK(isp);
lp = &FCPARAM(isp)->portdb[ifc->loopid];
if (lp->valid) {
ifc->loopid = lp->loopid;
ifc->portid = lp->portid;
ifc->node_wwn = lp->node_wwn;
ifc->port_wwn = lp->port_wwn;
retval = 0;
} else {
retval = ENODEV;
}
ISP_UNLOCK(isp);
break;
}
default:
break;
}
return (retval);
}
static void
isp_intr_enable(void *arg)
{
struct ispsoftc *isp = arg;
if (isp->isp_role != ISP_ROLE_NONE) {
ENABLE_INTS(isp);
isp->isp_osinfo.intsok = 1;
}
/* Release our hook so that the boot can continue. */
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
}
/*
* Put the target mode functions here, because some are inlines
*/
#ifdef ISP_TARGET_MODE
static __inline int is_lun_enabled(struct ispsoftc *, int, lun_id_t);
static __inline int are_any_luns_enabled(struct ispsoftc *, int);
static __inline tstate_t *get_lun_statep(struct ispsoftc *, int, lun_id_t);
static __inline void rls_lun_statep(struct ispsoftc *, tstate_t *);
static __inline int isp_psema_sig_rqe(struct ispsoftc *, int);
static __inline int isp_cv_wait_timed_rqe(struct ispsoftc *, int, int);
static __inline void isp_cv_signal_rqe(struct ispsoftc *, int, int);
static __inline void isp_vsema_rqe(struct ispsoftc *, int);
static cam_status
create_lun_state(struct ispsoftc *, int, struct cam_path *, tstate_t **);
static void destroy_lun_state(struct ispsoftc *, tstate_t *);
static void isp_en_lun(struct ispsoftc *, union ccb *);
static cam_status isp_abort_tgt_ccb(struct ispsoftc *, union ccb *);
static timeout_t isp_refire_putback_atio;
static void isp_complete_ctio(union ccb *);
static void isp_target_putback_atio(union ccb *);
static cam_status isp_target_start_ctio(struct ispsoftc *, union ccb *);
static int isp_handle_platform_atio(struct ispsoftc *, at_entry_t *);
static int isp_handle_platform_atio2(struct ispsoftc *, at2_entry_t *);
static int isp_handle_platform_ctio(struct ispsoftc *, void *);
static __inline int
is_lun_enabled(struct ispsoftc *isp, int bus, lun_id_t lun)
{
tstate_t *tptr;
tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(isp, bus, lun)];
if (tptr == NULL) {
return (0);
}
do {
if (tptr->lun == (lun_id_t) lun && tptr->bus == bus) {
return (1);
}
} while ((tptr = tptr->next) != NULL);
return (0);
}
static __inline int
are_any_luns_enabled(struct ispsoftc *isp, int port)
{
int lo, hi;
if (IS_DUALBUS(isp)) {
lo = (port * (LUN_HASH_SIZE >> 1));
hi = lo + (LUN_HASH_SIZE >> 1);
} else {
lo = 0;
hi = LUN_HASH_SIZE;
}
for (lo = 0; lo < hi; lo++) {
if (isp->isp_osinfo.lun_hash[lo]) {
return (1);
}
}
return (0);
}
static __inline tstate_t *
get_lun_statep(struct ispsoftc *isp, int bus, lun_id_t lun)
{
tstate_t *tptr = NULL;
if (lun == CAM_LUN_WILDCARD) {
if (isp->isp_osinfo.tmflags[bus] & TM_WILDCARD_ENABLED) {
tptr = &isp->isp_osinfo.tsdflt[bus];
tptr->hold++;
return (tptr);
}
} else {
tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(isp, bus, lun)];
if (tptr == NULL) {
return (NULL);
}
}
do {
if (tptr->lun == lun && tptr->bus == bus) {
tptr->hold++;
return (tptr);
}
} while ((tptr = tptr->next) != NULL);
return (tptr);
}
static __inline void
rls_lun_statep(struct ispsoftc *isp, tstate_t *tptr)
{
if (tptr->hold)
tptr->hold--;
}
static __inline int
isp_psema_sig_rqe(struct ispsoftc *isp, int bus)
{
while (isp->isp_osinfo.tmflags[bus] & TM_BUSY) {
isp->isp_osinfo.tmflags[bus] |= TM_WANTED;
if (cv_wait_sig(&isp->isp_osinfo.tgtcv0[bus], &isp->isp_lock)) {
return (-1);
}
isp->isp_osinfo.tmflags[bus] |= TM_BUSY;
}
return (0);
}
static __inline int
isp_cv_wait_timed_rqe(struct ispsoftc *isp, int bus, int timo)
{
if (cv_timedwait(&isp->isp_osinfo.tgtcv1[bus], &isp->isp_lock, timo)) {
return (-1);
}
return (0);
}
static __inline void
isp_cv_signal_rqe(struct ispsoftc *isp, int bus, int status)
{
isp->isp_osinfo.rstatus[bus] = status;
cv_signal(&isp->isp_osinfo.tgtcv1[bus]);
}
static __inline void
isp_vsema_rqe(struct ispsoftc *isp, int bus)
{
if (isp->isp_osinfo.tmflags[bus] & TM_WANTED) {
isp->isp_osinfo.tmflags[bus] &= ~TM_WANTED;
cv_signal(&isp->isp_osinfo.tgtcv0[bus]);
}
isp->isp_osinfo.tmflags[bus] &= ~TM_BUSY;
}
static cam_status
create_lun_state(struct ispsoftc *isp, int bus,
struct cam_path *path, tstate_t **rslt)
{
cam_status status;
lun_id_t lun;
int hfx;
tstate_t *tptr, *new;
lun = xpt_path_lun_id(path);
if (lun < 0) {
return (CAM_LUN_INVALID);
}
if (is_lun_enabled(isp, bus, lun)) {
return (CAM_LUN_ALRDY_ENA);
}
new = (tstate_t *) malloc(sizeof (tstate_t), M_DEVBUF, M_NOWAIT|M_ZERO);
if (new == NULL) {
return (CAM_RESRC_UNAVAIL);
}
status = xpt_create_path(&new->owner, NULL, xpt_path_path_id(path),
xpt_path_target_id(path), xpt_path_lun_id(path));
if (status != CAM_REQ_CMP) {
free(new, M_DEVBUF);
return (status);
}
new->bus = bus;
new->lun = lun;
SLIST_INIT(&new->atios);
SLIST_INIT(&new->inots);
new->hold = 1;
hfx = LUN_HASH_FUNC(isp, new->bus, new->lun);
tptr = isp->isp_osinfo.lun_hash[hfx];
if (tptr == NULL) {
isp->isp_osinfo.lun_hash[hfx] = new;
} else {
while (tptr->next)
tptr = tptr->next;
tptr->next = new;
}
*rslt = new;
return (CAM_REQ_CMP);
}
static __inline void
destroy_lun_state(struct ispsoftc *isp, tstate_t *tptr)
{
int hfx;
tstate_t *lw, *pw;
hfx = LUN_HASH_FUNC(isp, tptr->bus, tptr->lun);
if (tptr->hold) {
return;
}
pw = isp->isp_osinfo.lun_hash[hfx];
if (pw == NULL) {
return;
} else if (pw->lun == tptr->lun && pw->bus == tptr->bus) {
isp->isp_osinfo.lun_hash[hfx] = pw->next;
} else {
lw = pw;
pw = lw->next;
while (pw) {
if (pw->lun == tptr->lun && pw->bus == tptr->bus) {
lw->next = pw->next;
break;
}
lw = pw;
pw = pw->next;
}
if (pw == NULL) {
return;
}
}
free(tptr, M_DEVBUF);
}
/*
* we enter with our locks held.
*/
static void
isp_en_lun(struct ispsoftc *isp, union ccb *ccb)
{
const char lfmt[] = "Lun now %sabled for target mode on channel %d";
struct ccb_en_lun *cel = &ccb->cel;
tstate_t *tptr;
u_int16_t rstat;
int bus, cmd, av, wildcard;
lun_id_t lun;
target_id_t tgt;
bus = XS_CHANNEL(ccb) & 0x1;
tgt = ccb->ccb_h.target_id;
lun = ccb->ccb_h.target_lun;
/*
* Do some sanity checking first.
*/
if ((lun != CAM_LUN_WILDCARD) &&
(lun < 0 || lun >= (lun_id_t) isp->isp_maxluns)) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
if (IS_SCSI(isp)) {
sdparam *sdp = isp->isp_param;
sdp += bus;
if (tgt != CAM_TARGET_WILDCARD &&
tgt != sdp->isp_initiator_id) {
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
} else {
if (tgt != CAM_TARGET_WILDCARD &&
tgt != FCPARAM(isp)->isp_iid) {
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
/*
* This is as a good a place as any to check f/w capabilities.
*/
if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_TMODE) == 0) {
isp_prt(isp, ISP_LOGERR,
"firmware does not support target mode");
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
return;
}
/*
* XXX: We *could* handle non-SCCLUN f/w, but we'd have to
* XXX: dorks with our already fragile enable/disable code.
*/
if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
isp_prt(isp, ISP_LOGERR,
"firmware not SCCLUN capable");
}
}
if (tgt == CAM_TARGET_WILDCARD) {
if (lun == CAM_LUN_WILDCARD) {
wildcard = 1;
} else {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
} else {
wildcard = 0;
}
/*
* Next check to see whether this is a target/lun wildcard action.
*
* If so, we know that we can accept commands for luns that haven't
* been enabled yet and send them upstream. Otherwise, we have to
* handle them locally (if we see them at all).
*/
if (wildcard) {
tptr = &isp->isp_osinfo.tsdflt[bus];
if (cel->enable) {
if (isp->isp_osinfo.tmflags[bus] &
TM_WILDCARD_ENABLED) {
ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
return;
}
ccb->ccb_h.status =
xpt_create_path(&tptr->owner, NULL,
xpt_path_path_id(ccb->ccb_h.path),
xpt_path_target_id(ccb->ccb_h.path),
xpt_path_lun_id(ccb->ccb_h.path));
if (ccb->ccb_h.status != CAM_REQ_CMP) {
return;
}
SLIST_INIT(&tptr->atios);
SLIST_INIT(&tptr->inots);
isp->isp_osinfo.tmflags[bus] |= TM_WILDCARD_ENABLED;
} else {
if ((isp->isp_osinfo.tmflags[bus] &
TM_WILDCARD_ENABLED) == 0) {
ccb->ccb_h.status = CAM_REQ_CMP;
return;
}
if (tptr->hold) {
ccb->ccb_h.status = CAM_SCSI_BUSY;
return;
}
xpt_free_path(tptr->owner);
isp->isp_osinfo.tmflags[bus] &= ~TM_WILDCARD_ENABLED;
}
}
/*
* Now check to see whether this bus needs to be
* enabled/disabled with respect to target mode.
*/
av = bus << 31;
if (cel->enable && !(isp->isp_osinfo.tmflags[bus] & TM_TMODE_ENABLED)) {
av |= ENABLE_TARGET_FLAG;
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
if (wildcard) {
isp->isp_osinfo.tmflags[bus] &=
~TM_WILDCARD_ENABLED;
xpt_free_path(tptr->owner);
}
return;
}
isp->isp_osinfo.tmflags[bus] |= TM_TMODE_ENABLED;
isp_prt(isp, ISP_LOGINFO,
"Target Mode enabled on channel %d", bus);
} else if (cel->enable == 0 &&
(isp->isp_osinfo.tmflags[bus] & TM_TMODE_ENABLED) && wildcard) {
if (are_any_luns_enabled(isp, bus)) {
ccb->ccb_h.status = CAM_SCSI_BUSY;
return;
}
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
return;
}
isp->isp_osinfo.tmflags[bus] &= ~TM_TMODE_ENABLED;
isp_prt(isp, ISP_LOGINFO,
"Target Mode disabled on channel %d", bus);
}
if (wildcard) {
ccb->ccb_h.status = CAM_REQ_CMP;
return;
}
if (cel->enable) {
ccb->ccb_h.status =
create_lun_state(isp, bus, ccb->ccb_h.path, &tptr);
if (ccb->ccb_h.status != CAM_REQ_CMP) {
return;
}
} else {
tptr = get_lun_statep(isp, bus, lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
}
if (isp_psema_sig_rqe(isp, bus)) {
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
if (cel->enable) {
u_int32_t seq = isp->isp_osinfo.rollinfo++;
int c, n, ulun = lun;
cmd = RQSTYPE_ENABLE_LUN;
c = DFLT_CMND_CNT;
n = DFLT_INOT_CNT;
if (IS_FC(isp) && lun != 0) {
cmd = RQSTYPE_MODIFY_LUN;
n = 0;
/*
* For SCC firmware, we only deal with setting
* (enabling or modifying) lun 0.
*/
ulun = 0;
}
rstat = LUN_ERR;
if (isp_lun_cmd(isp, cmd, bus, tgt, ulun, c, n, seq)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGWARN, "isp_lun_cmd failed");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, bus, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"wait for ENABLE/MODIFY LUN timed out");
goto out;
}
rstat = isp->isp_osinfo.rstatus[bus];
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"ENABLE/MODIFY LUN returned 0x%x", rstat);
goto out;
}
} else {
int c, n, ulun = lun;
u_int32_t seq;
rstat = LUN_ERR;
seq = isp->isp_osinfo.rollinfo++;
cmd = -RQSTYPE_MODIFY_LUN;
c = DFLT_CMND_CNT;
n = DFLT_INOT_CNT;
if (IS_FC(isp) && lun != 0) {
n = 0;
/*
* For SCC firmware, we only deal with setting
* (enabling or modifying) lun 0.
*/
ulun = 0;
}
if (isp_lun_cmd(isp, cmd, bus, tgt, ulun, c, n, seq)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR, "isp_lun_cmd failed");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, bus, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"wait for MODIFY LUN timed out");
goto out;
}
rstat = isp->isp_osinfo.rstatus[bus];
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"MODIFY LUN returned 0x%x", rstat);
goto out;
}
if (IS_FC(isp) && lun) {
goto out;
}
seq = isp->isp_osinfo.rollinfo++;
rstat = LUN_ERR;
cmd = -RQSTYPE_ENABLE_LUN;
if (isp_lun_cmd(isp, cmd, bus, tgt, lun, 0, 0, seq)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR, "isp_lun_cmd failed");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, bus, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"wait for DISABLE LUN timed out");
goto out;
}
rstat = isp->isp_osinfo.rstatus[bus];
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGWARN,
"DISABLE LUN returned 0x%x", rstat);
goto out;
}
if (are_any_luns_enabled(isp, bus) == 0) {
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
isp_prt(isp, ISP_LOGWARN,
"disable target mode on channel %d failed",
bus);
goto out;
}
isp->isp_osinfo.tmflags[bus] &= ~TM_TMODE_ENABLED;
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO,
"Target Mode disabled on channel %d", bus);
}
}
out:
isp_vsema_rqe(isp, bus);
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGWARN,
"lun %sable failed", (cel->enable) ? "en" : "dis");
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
} else {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO, lfmt,
(cel->enable) ? "en" : "dis", bus);
rls_lun_statep(isp, tptr);
if (cel->enable == 0) {
destroy_lun_state(isp, tptr);
}
ccb->ccb_h.status = CAM_REQ_CMP;
}
}
static cam_status
isp_abort_tgt_ccb(struct ispsoftc *isp, union ccb *ccb)
{
tstate_t *tptr;
struct ccb_hdr_slist *lp;
struct ccb_hdr *curelm;
int found;
union ccb *accb = ccb->cab.abort_ccb;
if (accb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
if (IS_FC(isp) && (accb->ccb_h.target_id !=
((fcparam *) isp->isp_param)->isp_loopid)) {
return (CAM_PATH_INVALID);
} else if (IS_SCSI(isp) && (accb->ccb_h.target_id !=
((sdparam *) isp->isp_param)->isp_initiator_id)) {
return (CAM_PATH_INVALID);
}
}
tptr = get_lun_statep(isp, XS_CHANNEL(ccb), accb->ccb_h.target_lun);
if (tptr == NULL) {
return (CAM_PATH_INVALID);
}
if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
lp = &tptr->atios;
} else if (accb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
lp = &tptr->inots;
} else {
rls_lun_statep(isp, tptr);
return (CAM_UA_ABORT);
}
curelm = SLIST_FIRST(lp);
found = 0;
if (curelm == &accb->ccb_h) {
found = 1;
SLIST_REMOVE_HEAD(lp, sim_links.sle);
} else {
while(curelm != NULL) {
struct ccb_hdr *nextelm;
nextelm = SLIST_NEXT(curelm, sim_links.sle);
if (nextelm == &accb->ccb_h) {
found = 1;
SLIST_NEXT(curelm, sim_links.sle) =
SLIST_NEXT(nextelm, sim_links.sle);
break;
}
curelm = nextelm;
}
}
rls_lun_statep(isp, tptr);
if (found) {
accb->ccb_h.status = CAM_REQ_ABORTED;
return (CAM_REQ_CMP);
}
return(CAM_PATH_INVALID);
}
static cam_status
isp_target_start_ctio(struct ispsoftc *isp, union ccb *ccb)
{
void *qe;
struct ccb_scsiio *cso = &ccb->csio;
u_int16_t *hp, save_handle;
u_int16_t iptr, optr;
if (isp_getrqentry(isp, &iptr, &optr, &qe)) {
xpt_print_path(ccb->ccb_h.path);
printf("Request Queue Overflow in isp_target_start_ctio\n");
return (CAM_RESRC_UNAVAIL);
}
bzero(qe, QENTRY_LEN);
/*
* We're either moving data or completing a command here.
*/
if (IS_FC(isp)) {
int resid;
ct2_entry_t *cto = qe;
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
cto->ct_header.rqs_entry_count = 1;
cto->ct_iid = cso->init_id;
if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
cto->ct_lun = ccb->ccb_h.target_lun;
}
/*
* Start with a residual based on what the original datalength
* was supposed to be. Basically, we ignore what CAM has set
* for residuals. The data transfer routines will knock off
* the residual for each byte actually moved- and also will
* be responsible for setting the underrun flag.
*/
/* HACK! HACK! */
resid = ccb->ccb_h.spriv_field0;
cto->ct_resid = 0;
cto->ct_rxid = cso->tag_id;
if (cso->dxfer_len == 0) {
cto->ct_flags |= CT2_FLAG_MODE1 | CT2_NO_DATA;
if (ccb->ccb_h.flags & CAM_SEND_STATUS) {
cto->ct_flags |= CT2_SENDSTATUS;
cto->rsp.m1.ct_scsi_status = cso->scsi_status;
cto->ct_resid = resid;
}
if ((ccb->ccb_h.flags & CAM_SEND_SENSE) != 0) {
int m = min(cso->sense_len, MAXRESPLEN);
bcopy(&cso->sense_data, cto->rsp.m1.ct_resp, m);
cto->rsp.m1.ct_senselen = m;
cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
}
} else {
cto->ct_flags |= CT2_FLAG_MODE0;
if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT2_DATA_IN;
} else {
cto->ct_flags |= CT2_DATA_OUT;
}
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
cto->ct_flags |= CT2_SENDSTATUS;
cto->rsp.m0.ct_scsi_status = cso->scsi_status;
cto->ct_resid = resid;
}
/*
* If we're sending data and status back together,
* we can't also send back sense data as well.
*/
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
}
if (cto->ct_flags & CT2_SENDSTATUS) {
isp_prt(isp, ISP_LOGTDEBUG0,
"CTIO2[%x] SCSI STATUS 0x%x curxf %u finalresid %u",
cto->ct_rxid, cso->scsi_status, cso->dxfer_len,
resid);
cto->ct_flags |= CT2_CCINCR;
}
cto->ct_timeout = 10;
hp = &cto->ct_syshandle;
} else {
ct_entry_t *cto = qe;
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
cto->ct_header.rqs_entry_count = 1;
cto->ct_iid = cso->init_id;
cto->ct_iid |= XS_CHANNEL(ccb) << 7;
cto->ct_tgt = ccb->ccb_h.target_id;
cto->ct_lun = ccb->ccb_h.target_lun;
cto->ct_fwhandle = AT_GET_HANDLE(cso->tag_id);
if (AT_HAS_TAG(cso->tag_id)) {
cto->ct_tag_val = (u_int8_t) AT_GET_TAG(cso->tag_id);
cto->ct_flags |= CT_TQAE;
}
if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) {
cto->ct_flags |= CT_NODISC;
}
if (cso->dxfer_len == 0) {
cto->ct_flags |= CT_NO_DATA;
} else if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT_DATA_IN;
} else {
cto->ct_flags |= CT_DATA_OUT;
}
if (ccb->ccb_h.flags & CAM_SEND_STATUS) {
cto->ct_flags |= CT_SENDSTATUS;
cto->ct_scsi_status = cso->scsi_status;
cto->ct_resid = cso->resid;
}
if (cto->ct_flags & CT_SENDSTATUS) {
isp_prt(isp, ISP_LOGTDEBUG0,
"CTIO[%x] SCSI STATUS 0x%x resid %d tag_id %x",
cto->ct_fwhandle, cso->scsi_status, cso->resid,
cso->tag_id);
cto->ct_flags |= CT_CCINCR;
}
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
cto->ct_timeout = 10;
hp = &cto->ct_syshandle;
}
if (isp_save_xs(isp, (XS_T *)ccb, hp)) {
xpt_print_path(ccb->ccb_h.path);
printf("No XFLIST pointers for isp_target_start_ctio\n");
return (CAM_RESRC_UNAVAIL);
}
/*
* Call the dma setup routines for this entry (and any subsequent
* CTIOs) if there's data to move, and then tell the f/w it's got
* new things to play with. As with isp_start's usage of DMA setup,
* any swizzling is done in the machine dependent layer. Because
* of this, we put the request onto the queue area first in native
* format.
*/
save_handle = *hp;
switch (ISP_DMASETUP(isp, cso, qe, &iptr, optr)) {
case CMD_QUEUED:
ISP_ADD_REQUEST(isp, iptr);
return (CAM_REQ_INPROG);
case CMD_EAGAIN:
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
isp_destroy_handle(isp, save_handle);
return (CAM_RESRC_UNAVAIL);
default:
isp_destroy_handle(isp, save_handle);
return (XS_ERR(ccb));
}
}
static void
isp_refire_putback_atio(void *arg)
{
int s = splcam();
isp_target_putback_atio(arg);
splx(s);
}
static void
isp_target_putback_atio(union ccb *ccb)
{
struct ispsoftc *isp;
struct ccb_scsiio *cso;
u_int16_t iptr, optr;
void *qe;
isp = XS_ISP(ccb);
if (isp_getrqentry(isp, &iptr, &optr, &qe)) {
(void) timeout(isp_refire_putback_atio, ccb, 10);
isp_prt(isp, ISP_LOGWARN,
"isp_target_putback_atio: Request Queue Overflow");
return;
}
bzero(qe, QENTRY_LEN);
cso = &ccb->csio;
if (IS_FC(isp)) {
at2_entry_t *at = qe;
at->at_header.rqs_entry_type = RQSTYPE_ATIO2;
at->at_header.rqs_entry_count = 1;
if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) != 0) {
at->at_scclun = (uint16_t) ccb->ccb_h.target_lun;
} else {
at->at_lun = (uint8_t) ccb->ccb_h.target_lun;
}
at->at_status = CT_OK;
at->at_rxid = cso->tag_id;
ISP_SWIZ_ATIO2(isp, qe, qe);
} else {
at_entry_t *at = qe;
at->at_header.rqs_entry_type = RQSTYPE_ATIO;
at->at_header.rqs_entry_count = 1;
at->at_iid = cso->init_id;
at->at_iid |= XS_CHANNEL(ccb) << 7;
at->at_tgt = cso->ccb_h.target_id;
at->at_lun = cso->ccb_h.target_lun;
at->at_status = CT_OK;
at->at_tag_val = AT_GET_TAG(cso->tag_id);
at->at_handle = AT_GET_HANDLE(cso->tag_id);
ISP_SWIZ_ATIO(isp, qe, qe);
}
ISP_TDQE(isp, "isp_target_putback_atio", (int) optr, qe);
ISP_ADD_REQUEST(isp, iptr);
isp_complete_ctio(ccb);
}
static void
isp_complete_ctio(union ccb *ccb)
{
struct ispsoftc *isp = XS_ISP(ccb);
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
ccb->ccb_h.status |= CAM_REQ_CMP;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
if (isp->isp_osinfo.simqfrozen == 0) {
if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
isp_prt(isp, ISP_LOGDEBUG2, "ctio->relsimq");
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
isp_prt(isp, ISP_LOGWARN, "ctio->devqfrozen");
}
} else {
isp_prt(isp, ISP_LOGWARN,
"ctio->simqfrozen(%x)", isp->isp_osinfo.simqfrozen);
}
}
xpt_done(ccb);
}
/*
* Handle ATIO stuff that the generic code can't.
* This means handling CDBs.
*/
static int
isp_handle_platform_atio(struct ispsoftc *isp, at_entry_t *aep)
{
tstate_t *tptr;
int status, bus, iswildcard;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*
* If the DISCONNECTS DISABLED bit is set in the flags field,
* we're still connected on the SCSI bus.
*/
status = aep->at_status;
if ((status & ~QLTM_SVALID) == AT_PHASE_ERROR) {
/*
* Bus Phase Sequence error. We should have sense data
* suggested by the f/w. I'm not sure quite yet what
* to do about this for CAM.
*/
isp_prt(isp, ISP_LOGWARN, "PHASE ERROR");
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
if ((status & ~QLTM_SVALID) != AT_CDB) {
isp_prt(isp, ISP_LOGWARN, "bad atio (0x%x) leaked to platform",
status);
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
bus = GET_BUS_VAL(aep->at_iid);
tptr = get_lun_statep(isp, bus, aep->at_lun);
if (tptr == NULL) {
tptr = get_lun_statep(isp, bus, CAM_LUN_WILDCARD);
iswildcard = 1;
} else {
iswildcard = 0;
}
if (tptr == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
isp_prt(isp, ISP_LOGWARN,
"no ATIOS for lun %d from initiator %d on channel %d",
aep->at_lun, GET_IID_VAL(aep->at_iid), bus);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
rls_lun_statep(isp, tptr);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
if (iswildcard) {
atiop->ccb_h.target_id = aep->at_tgt;
atiop->ccb_h.target_lun = aep->at_lun;
}
if (aep->at_flags & AT_NODISC) {
atiop->ccb_h.flags = CAM_DIS_DISCONNECT;
} else {
atiop->ccb_h.flags = 0;
}
if (status & QLTM_SVALID) {
size_t amt = imin(QLTM_SENSELEN, sizeof (atiop->sense_data));
atiop->sense_len = amt;
MEMCPY(&atiop->sense_data, aep->at_sense, amt);
} else {
atiop->sense_len = 0;
}
atiop->init_id = GET_IID_VAL(aep->at_iid);
atiop->cdb_len = aep->at_cdblen;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, aep->at_cdblen);
atiop->ccb_h.status = CAM_CDB_RECVD;
/*
* Construct a tag 'id' based upon tag value (which may be 0..255)
* and the handle (which we have to preserve).
*/
AT_MAKE_TAGID(atiop->tag_id, aep);
if (aep->at_flags & AT_TQAE) {
atiop->tag_action = aep->at_tag_type;
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
xpt_done((union ccb*)atiop);
isp_prt(isp, ISP_LOGTDEBUG0,
"ATIO[%x] CDB=0x%x bus %d iid%d->lun%d tag 0x%x ttype 0x%x %s",
aep->at_handle, aep->at_cdb[0] & 0xff, GET_BUS_VAL(aep->at_iid),
GET_IID_VAL(aep->at_iid), aep->at_lun, aep->at_tag_val & 0xff,
aep->at_tag_type, (aep->at_flags & AT_NODISC)?
"nondisc" : "disconnecting");
rls_lun_statep(isp, tptr);
return (0);
}
static int
isp_handle_platform_atio2(struct ispsoftc *isp, at2_entry_t *aep)
{
lun_id_t lun;
tstate_t *tptr;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*/
if ((aep->at_status & ~QLTM_SVALID) != AT_CDB) {
isp_prt(isp, ISP_LOGWARN,
"bogus atio (0x%x) leaked to platform", aep->at_status);
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) != 0) {
lun = aep->at_scclun;
} else {
lun = aep->at_lun;
}
tptr = get_lun_statep(isp, 0, lun);
if (tptr == NULL) {
tptr = get_lun_statep(isp, 0, CAM_LUN_WILDCARD);
}
if (tptr == NULL) {
/*
* What we'd like to know is whether or not we have a listener
* upstream that really hasn't configured yet. If we do, then
* we can give a more sensible reply here. If not, then we can
* reject this out of hand.
*
* Choices for what to send were
*
* Not Ready, Unit Not Self-Configured Yet
* (0x2,0x3e,0x00)
*
* for the former and
*
* Illegal Request, Logical Unit Not Supported
* (0x5,0x25,0x00)
*
* for the latter.
*
* We used to decide whether there was at least one listener
* based upon whether the black hole driver was configured.
* However, recent config(8) changes have made this hard to do
* at this time.
*
*/
u_int32_t ccode = SCSI_STATUS_BUSY;
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, ccode, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
isp_prt(isp, ISP_LOGWARN,
"no ATIOS for lun %d from initiator %d", lun, aep->at_iid);
rls_lun_statep(isp, tptr);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
if (tptr == &isp->isp_osinfo.tsdflt[0]) {
atiop->ccb_h.target_id =
((fcparam *)isp->isp_param)->isp_loopid;
atiop->ccb_h.target_lun = lun;
}
/*
* We don't get 'suggested' sense data as we do with SCSI cards.
*/
atiop->sense_len = 0;
atiop->init_id = aep->at_iid;
atiop->cdb_len = ATIO2_CDBLEN;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, ATIO2_CDBLEN);
atiop->ccb_h.status = CAM_CDB_RECVD;
atiop->tag_id = aep->at_rxid;
switch (aep->at_taskflags & ATIO2_TC_ATTR_MASK) {
case ATIO2_TC_ATTR_SIMPLEQ:
atiop->tag_action = MSG_SIMPLE_Q_TAG;
break;
case ATIO2_TC_ATTR_HEADOFQ:
atiop->tag_action = MSG_HEAD_OF_Q_TAG;
break;
case ATIO2_TC_ATTR_ORDERED:
atiop->tag_action = MSG_ORDERED_Q_TAG;
break;
case ATIO2_TC_ATTR_ACAQ: /* ?? */
case ATIO2_TC_ATTR_UNTAGGED:
default:
atiop->tag_action = 0;
break;
}
if (atiop->tag_action != 0) {
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
/*
* Preserve overall command datalength in private field.
*/
atiop->ccb_h.spriv_field0 = aep->at_datalen;
xpt_done((union ccb*)atiop);
isp_prt(isp, ISP_LOGTDEBUG0,
"ATIO2[%x] CDB=0x%x iid%d->lun%d tattr 0x%x datalen %u",
aep->at_rxid, aep->at_cdb[0] & 0xff, aep->at_iid,
lun, aep->at_taskflags, aep->at_datalen);
rls_lun_statep(isp, tptr);
return (0);
}
static int
isp_handle_platform_ctio(struct ispsoftc *isp, void *arg)
{
union ccb *ccb;
int sentstatus, ok, notify_cam, resid = 0;
u_int16_t tval;
/*
* CTIO and CTIO2 are close enough....
*/
ccb = (union ccb *) isp_find_xs(isp, ((ct_entry_t *)arg)->ct_syshandle);
KASSERT((ccb != NULL), ("null ccb in isp_handle_platform_ctio"));
isp_destroy_handle(isp, ((ct_entry_t *)arg)->ct_syshandle);
if (IS_FC(isp)) {
ct2_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT2_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
if (ok && sentstatus && (ccb->ccb_h.flags & CAM_SEND_SENSE)) {
ccb->ccb_h.status |= CAM_SENT_SENSE;
}
notify_cam = ct->ct_header.rqs_seqno & 0x1;
if ((ct->ct_flags & CT2_DATAMASK) != CT2_NO_DATA) {
resid = ct->ct_resid;
}
isp_prt(isp, ISP_LOGTDEBUG0,
"CTIO2[%x] sts 0x%x flg 0x%x sns %d resid %d %s",
ct->ct_rxid, ct->ct_status, ct->ct_flags,
(ccb->ccb_h.status & CAM_SENT_SENSE) != 0,
resid, sentstatus? "FIN" : "MID");
tval = ct->ct_rxid;
} else {
ct_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
/*
* We *ought* to be able to get back to the original ATIO
* here, but for some reason this gets lost. It's just as
* well because it's squirrelled away as part of periph
* private data.
*
* We can live without it as long as we continue to use
* the auto-replenish feature for CTIOs.
*/
notify_cam = ct->ct_header.rqs_seqno & 0x1;
if (ct->ct_status & QLTM_SVALID) {
char *sp = (char *)ct;
sp += CTIO_SENSE_OFFSET;
ccb->csio.sense_len =
min(sizeof (ccb->csio.sense_data), QLTM_SENSELEN);
MEMCPY(&ccb->csio.sense_data, sp, ccb->csio.sense_len);
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
}
if ((ct->ct_flags & CT_DATAMASK) != CT_NO_DATA) {
resid = ct->ct_resid;
}
isp_prt(isp, ISP_LOGTDEBUG0,
"CTIO[%x] tag %x iid %d lun %d sts %x flg %x resid %d %s",
ct->ct_fwhandle, ct->ct_tag_val, ct->ct_iid, ct->ct_lun,
ct->ct_status, ct->ct_flags, resid,
sentstatus? "FIN" : "MID");
tval = ct->ct_fwhandle;
}
ccb->csio.resid += resid;
/*
* We're here either because intermediate data transfers are done
* and/or the final status CTIO (which may have joined with a
* Data Transfer) is done.
*
* In any case, for this platform, the upper layers figure out
* what to do next, so all we do here is collect status and
* pass information along. Any DMA handles have already been
* freed.
*/
if (notify_cam == 0) {
isp_prt(isp, ISP_LOGTDEBUG0, " INTER CTIO[0x%x] done", tval);
return (0);
}
isp_prt(isp, ISP_LOGTDEBUG0, "%s CTIO[0x%x] done (resid %d)",
(sentstatus)? " FINAL " : "MIDTERM ", tval, ccb->csio.resid);
if (!ok) {
isp_target_putback_atio(ccb);
} else {
isp_complete_ctio(ccb);
}
return (0);
}
#endif
static void
isp_cam_async(void *cbarg, u_int32_t code, struct cam_path *path, void *arg)
{
struct cam_sim *sim;
struct ispsoftc *isp;
sim = (struct cam_sim *)cbarg;
isp = (struct ispsoftc *) cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
if (IS_SCSI(isp)) {
u_int16_t oflags, nflags;
sdparam *sdp = isp->isp_param;
int tgt;
tgt = xpt_path_target_id(path);
ISP_LOCK(isp);
sdp += cam_sim_bus(sim);
nflags = sdp->isp_devparam[tgt].nvrm_flags;
#ifndef ISP_TARGET_MODE
nflags &= DPARM_SAFE_DFLT;
if (isp->isp_loaded_fw) {
nflags |= DPARM_NARROW | DPARM_ASYNC;
}
#else
nflags = DPARM_DEFAULT;
#endif
oflags = sdp->isp_devparam[tgt].goal_flags;
sdp->isp_devparam[tgt].goal_flags = nflags;
sdp->isp_devparam[tgt].dev_update = 1;
isp->isp_update |= (1 << cam_sim_bus(sim));
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS, NULL);
sdp->isp_devparam[tgt].goal_flags = oflags;
ISP_UNLOCK(isp);
}
break;
default:
isp_prt(isp, ISP_LOGWARN, "isp_cam_async: Code 0x%x", code);
break;
}
}
static void
isp_poll(struct cam_sim *sim)
{
struct ispsoftc *isp = cam_sim_softc(sim);
u_int16_t isr, sema, mbox;
ISP_LOCK(isp);
if (ISP_READ_ISR(isp, &isr, &sema, &mbox)) {
isp_intr(isp, isr, sema, mbox);
}
ISP_UNLOCK(isp);
}
#if 0
static void
isp_relsim(void *arg)
{
struct ispsoftc *isp = arg;
ISP_LOCK(isp);
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED) {
int wasfrozen = isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_TIMED;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
xpt_release_simq(isp->isp_sim, 1);
isp_prt(isp, ISP_LOGDEBUG2, "timed relsimq");
}
}
ISP_UNLOCK(isp);
}
#endif
static void
isp_watchdog(void *arg)
{
XS_T *xs = arg;
struct ispsoftc *isp = XS_ISP(xs);
u_int32_t handle;
/*
* We've decided this command is dead. Make sure we're not trying
* to kill a command that's already dead by getting it's handle and
* and seeing whether it's still alive.
*/
ISP_LOCK(isp);
handle = isp_find_handle(isp, xs);
if (handle) {
u_int16_t isr, sema, mbox;
if (XS_CMD_DONE_P(xs)) {
isp_prt(isp, ISP_LOGDEBUG1,
"watchdog found done cmd (handle 0x%x)", handle);
ISP_UNLOCK(isp);
return;
}
if (XS_CMD_WDOG_P(xs)) {
isp_prt(isp, ISP_LOGDEBUG2,
"recursive watchdog (handle 0x%x)", handle);
ISP_UNLOCK(isp);
return;
}
XS_CMD_S_WDOG(xs);
if (ISP_READ_ISR(isp, &isr, &sema, &mbox)) {
isp_intr(isp, isr, sema, mbox);
}
if (XS_CMD_DONE_P(xs)) {
isp_prt(isp, ISP_LOGDEBUG2,
"watchdog cleanup for handle 0x%x", handle);
xpt_done((union ccb *) xs);
} else if (XS_CMD_GRACE_P(xs)) {
/*
* Make sure the command is *really* dead before we
* release the handle (and DMA resources) for reuse.
*/
(void) isp_control(isp, ISPCTL_ABORT_CMD, arg);
/*
* After this point, the comamnd is really dead.
*/
if (XS_XFRLEN(xs)) {
ISP_DMAFREE(isp, xs, handle);
}
isp_destroy_handle(isp, handle);
xpt_print_path(xs->ccb_h.path);
isp_prt(isp, ISP_LOGWARN,
"watchdog timeout for handle %x", handle);
XS_SETERR(xs, CAM_CMD_TIMEOUT);
XS_CMD_C_WDOG(xs);
isp_done(xs);
} else {
u_int16_t iptr, optr;
ispreq_t *mp;
XS_CMD_C_WDOG(xs);
xs->ccb_h.timeout_ch = timeout(isp_watchdog, xs, hz);
if (isp_getrqentry(isp, &iptr, &optr, (void **) &mp)) {
ISP_UNLOCK(isp);
return;
}
XS_CMD_S_GRACE(xs);
MEMZERO((void *) mp, sizeof (*mp));
mp->req_header.rqs_entry_count = 1;
mp->req_header.rqs_entry_type = RQSTYPE_MARKER;
mp->req_modifier = SYNC_ALL;
mp->req_target = XS_CHANNEL(xs) << 7;
ISP_SWIZZLE_REQUEST(isp, mp);
ISP_ADD_REQUEST(isp, iptr);
}
} else {
isp_prt(isp, ISP_LOGDEBUG2, "watchdog with no command");
}
ISP_UNLOCK(isp);
}
static int isp_ktmature = 0;
static void
isp_kthread(void *arg)
{
int wasfrozen;
struct ispsoftc *isp = arg;
mtx_lock(&isp->isp_lock);
for (;;) {
isp_prt(isp, ISP_LOGDEBUG0, "kthread checking FC state");
while (isp_fc_runstate(isp, 2 * 1000000) != 0) {
if (FCPARAM(isp)->isp_fwstate != FW_READY ||
FCPARAM(isp)->isp_loopstate < LOOP_PDB_RCVD) {
if (FCPARAM(isp)->loop_seen_once == 0 ||
isp_ktmature == 0) {
break;
}
}
msleep(isp_kthread, &isp->isp_lock,
PRIBIO, "isp_fcthrd", hz);
}
/*
* Even if we didn't get good loop state we may be
* unfreezing the SIMQ so that we can kill off
* commands (if we've never seen loop before, e.g.)
*/
isp_ktmature = 1;
wasfrozen = isp->isp_osinfo.simqfrozen & SIMQFRZ_LOOPDOWN;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_LOOPDOWN;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0, "kthread up release simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
cv_wait(&isp->isp_osinfo.kthread_cv, &isp->isp_lock);
}
}
static void
isp_action(struct cam_sim *sim, union ccb *ccb)
{
int bus, tgt, error;
struct ispsoftc *isp;
struct ccb_trans_settings *cts;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("isp_action\n"));
isp = (struct ispsoftc *)cam_sim_softc(sim);
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
if (isp->isp_state != ISP_RUNSTATE &&
ccb->ccb_h.func_code == XPT_SCSI_IO) {
CAMLOCK_2_ISPLOCK(isp);
isp_init(isp);
if (isp->isp_state != ISP_INITSTATE) {
ISP_UNLOCK(isp);
/*
* Lie. Say it was a selection timeout.
*/
ccb->ccb_h.status = CAM_SEL_TIMEOUT | CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, 1);
xpt_done(ccb);
return;
}
isp->isp_state = ISP_RUNSTATE;
ISPLOCK_2_CAMLOCK(isp);
}
isp_prt(isp, ISP_LOGDEBUG2, "isp_action code %x", ccb->ccb_h.func_code);
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO: /* Execute the requested I/O operation */
/*
* Do a couple of preliminary checks...
*/
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
#ifdef DIAGNOSTIC
if (ccb->ccb_h.target_id > (ISP_MAX_TARGETS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
} else if (ccb->ccb_h.target_lun > (ISP_MAX_LUNS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
}
if (ccb->ccb_h.status == CAM_PATH_INVALID) {
isp_prt(isp, ISP_LOGERR,
"invalid tgt/lun (%d.%d) in XPT_SCSI_IO",
ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
xpt_done(ccb);
break;
}
#endif
((struct ccb_scsiio *) ccb)->scsi_status = SCSI_STATUS_OK;
CAMLOCK_2_ISPLOCK(isp);
error = isp_start((XS_T *) ccb);
switch (error) {
case CMD_QUEUED:
ccb->ccb_h.status |= CAM_SIM_QUEUED;
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
u_int64_t ticks = (u_int64_t) hz;
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT)
ticks = 60 * 1000 * ticks;
else
ticks = ccb->ccb_h.timeout * hz;
ticks = ((ticks + 999) / 1000) + hz + hz;
if (ticks >= 0x80000000) {
isp_prt(isp, ISP_LOGERR,
"timeout overflow");
ticks = 0x80000000;
}
ccb->ccb_h.timeout_ch = timeout(isp_watchdog,
(caddr_t)ccb, (int)ticks);
} else {
callout_handle_init(&ccb->ccb_h.timeout_ch);
}
ISPLOCK_2_CAMLOCK(isp);
break;
case CMD_RQLATER:
/*
* This can only happen for Fibre Channel
*/
KASSERT((IS_FC(isp)), ("CMD_RQLATER for FC only"));
if (FCPARAM(isp)->loop_seen_once == 0 && isp_ktmature) {
ISPLOCK_2_CAMLOCK(isp);
XS_SETERR(ccb, CAM_SEL_TIMEOUT);
xpt_done(ccb);
break;
}
cv_signal(&isp->isp_osinfo.kthread_cv);
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG2,
"RQLATER freeze simq");
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(sim, 1);
} else {
ISPLOCK_2_CAMLOCK(isp);
}
XS_SETERR(ccb, CAM_REQUEUE_REQ);
xpt_done(ccb);
break;
case CMD_EAGAIN:
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
isp_prt(isp, ISP_LOGDEBUG2,
"EAGAIN freeze simq");
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
XS_SETERR(ccb, CAM_REQUEUE_REQ);
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
break;
case CMD_COMPLETE:
isp_done((struct ccb_scsiio *) ccb);
ISPLOCK_2_CAMLOCK(isp);
break;
default:
isp_prt(isp, ISP_LOGERR,
"What's this? 0x%x at %d in file %s",
error, __LINE__, __FILE__);
XS_SETERR(ccb, CAM_REQ_CMP_ERR);
xpt_done(ccb);
ISPLOCK_2_CAMLOCK(isp);
}
break;
#ifdef ISP_TARGET_MODE
case XPT_EN_LUN: /* Enable LUN as a target */
{
int iok;
CAMLOCK_2_ISPLOCK(isp);
iok = isp->isp_osinfo.intsok;
isp->isp_osinfo.intsok = 0;
isp_en_lun(isp, ccb);
isp->isp_osinfo.intsok = iok;
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
break;
}
case XPT_NOTIFY_ACK: /* recycle notify ack */
case XPT_IMMED_NOTIFY: /* Add Immediate Notify Resource */
case XPT_ACCEPT_TARGET_IO: /* Add Accept Target IO Resource */
{
tstate_t *tptr =
get_lun_statep(isp, XS_CHANNEL(ccb), ccb->ccb_h.target_lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
xpt_done(ccb);
break;
}
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
CAMLOCK_2_ISPLOCK(isp);
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
SLIST_INSERT_HEAD(&tptr->atios,
&ccb->ccb_h, sim_links.sle);
} else {
SLIST_INSERT_HEAD(&tptr->inots, &ccb->ccb_h,
sim_links.sle);
}
rls_lun_statep(isp, tptr);
ccb->ccb_h.status = CAM_REQ_INPROG;
ISPLOCK_2_CAMLOCK(isp);
break;
}
case XPT_CONT_TARGET_IO:
{
CAMLOCK_2_ISPLOCK(isp);
ccb->ccb_h.status = isp_target_start_ctio(isp, ccb);
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO,
"XPT_CONT_TARGET_IO freeze simq");
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
XS_SETERR(ccb, CAM_REQUEUE_REQ);
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
} else {
ISPLOCK_2_CAMLOCK(isp);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
}
break;
}
#endif
case XPT_RESET_DEV: /* BDR the specified SCSI device */
bus = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path));
tgt = ccb->ccb_h.target_id;
tgt |= (bus << 16);
CAMLOCK_2_ISPLOCK(isp);
error = isp_control(isp, ISPCTL_RESET_DEV, &tgt);
ISPLOCK_2_CAMLOCK(isp);
if (error) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_ABORT: /* Abort the specified CCB */
{
union ccb *accb = ccb->cab.abort_ccb;
CAMLOCK_2_ISPLOCK(isp);
switch (accb->ccb_h.func_code) {
#ifdef ISP_TARGET_MODE
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
ccb->ccb_h.status = isp_abort_tgt_ccb(isp, ccb);
break;
case XPT_CONT_TARGET_IO:
isp_prt(isp, ISP_LOGERR, "cannot abort CTIOs yet");
ccb->ccb_h.status = CAM_UA_ABORT;
break;
#endif
case XPT_SCSI_IO:
error = isp_control(isp, ISPCTL_ABORT_CMD, ccb);
if (error) {
ccb->ccb_h.status = CAM_UA_ABORT;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
break;
}
#ifdef CAM_NEW_TRAN_CODE
#define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS)
#else
#define IS_CURRENT_SETTINGS(c) (c->flags & CCB_TRANS_CURRENT_SETTINGS)
#endif
case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */
cts = &ccb->cts;
if (!IS_CURRENT_SETTINGS(cts)) {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
tgt = cts->ccb_h.target_id;
CAMLOCK_2_ISPLOCK(isp);
if (IS_SCSI(isp)) {
#ifndef CAM_NEW_TRAN_CODE
sdparam *sdp = isp->isp_param;
u_int16_t *dptr;
bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
sdp += bus;
/*
* We always update (internally) from goal_flags
* so any request to change settings just gets
* vectored to that location.
*/
dptr = &sdp->isp_devparam[tgt].goal_flags;
/*
* Note that these operations affect the
* the goal flags (goal_flags)- not
* the current state flags. Then we mark
* things so that the next operation to
* this HBA will cause the update to occur.
*/
if (cts->valid & CCB_TRANS_DISC_VALID) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) {
*dptr |= DPARM_DISC;
} else {
*dptr &= ~DPARM_DISC;
}
}
if (cts->valid & CCB_TRANS_TQ_VALID) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) {
*dptr |= DPARM_TQING;
} else {
*dptr &= ~DPARM_TQING;
}
}
if (cts->valid & CCB_TRANS_BUS_WIDTH_VALID) {
switch (cts->bus_width) {
case MSG_EXT_WDTR_BUS_16_BIT:
*dptr |= DPARM_WIDE;
break;
default:
*dptr &= ~DPARM_WIDE;
}
}
/*
* Any SYNC RATE of nonzero and SYNC_OFFSET
* of nonzero will cause us to go to the
* selected (from NVRAM) maximum value for
* this device. At a later point, we'll
* allow finer control.
*/
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) &&
(cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) &&
(cts->sync_offset > 0)) {
*dptr |= DPARM_SYNC;
} else {
*dptr &= ~DPARM_SYNC;
}
*dptr |= DPARM_SAFE_DFLT;
#else
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
sdparam *sdp = isp->isp_param;
u_int16_t *dptr;
bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
sdp += bus;
/*
* We always update (internally) from goal_flags
* so any request to change settings just gets
* vectored to that location.
*/
dptr = &sdp->isp_devparam[tgt].goal_flags;
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
*dptr |= DPARM_DISC;
else
*dptr &= ~DPARM_DISC;
}
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
*dptr |= DPARM_TQING;
else
*dptr &= ~DPARM_TQING;
}
if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
if (spi->bus_width == MSG_EXT_WDTR_BUS_16_BIT)
*dptr |= DPARM_WIDE;
else
*dptr &= ~DPARM_WIDE;
}
/*
* XXX: FIX ME
*/
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) &&
(spi->valid & CTS_SPI_VALID_SYNC_RATE) &&
(spi->sync_period && spi->sync_offset)) {
*dptr |= DPARM_SYNC;
/*
* XXX: CHECK FOR LEGALITY
*/
sdp->isp_devparam[tgt].goal_period =
spi->sync_period;
sdp->isp_devparam[tgt].goal_offset =
spi->sync_offset;
} else {
*dptr &= ~DPARM_SYNC;
}
#endif
isp_prt(isp, ISP_LOGDEBUG0,
"SET bus %d targ %d to flags %x off %x per %x",
bus, tgt, sdp->isp_devparam[tgt].goal_flags,
sdp->isp_devparam[tgt].goal_offset,
sdp->isp_devparam[tgt].goal_period);
sdp->isp_devparam[tgt].dev_update = 1;
isp->isp_update |= (1 << bus);
}
ISPLOCK_2_CAMLOCK(isp);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
CAMLOCK_2_ISPLOCK(isp);
if (IS_FC(isp)) {
#ifndef CAM_NEW_TRAN_CODE
/*
* a lot of normal SCSI things don't make sense.
*/
cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
/*
* How do you measure the width of a high
* speed serial bus? Well, in bytes.
*
* Offset and period make no sense, though, so we set
* (above) a 'base' transfer speed to be gigabit.
*/
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
#else
fcparam *fcp = isp->isp_param;
struct ccb_trans_settings_fc *fc =
&cts->xport_specific.fc;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_FC;
cts->transport_version = 0;
fc->valid = CTS_FC_VALID_SPEED;
fc->bitrate = 100000;
if (tgt > 0 && tgt < MAX_FC_TARG) {
struct lportdb *lp = &fcp->portdb[tgt];
fc->wwnn = lp->node_wwn;
fc->wwpn = lp->port_wwn;
fc->port = lp->portid;
fc->valid |= CTS_FC_VALID_WWNN |
CTS_FC_VALID_WWPN | CTS_FC_VALID_PORT;
}
#endif
} else {
#ifdef CAM_NEW_TRAN_CODE
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
#endif
sdparam *sdp = isp->isp_param;
int bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
u_int16_t dval, pval, oval;
sdp += bus;
if (IS_CURRENT_SETTINGS(cts)) {
sdp->isp_devparam[tgt].dev_refresh = 1;
isp->isp_update |= (1 << bus);
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS,
NULL);
dval = sdp->isp_devparam[tgt].actv_flags;
oval = sdp->isp_devparam[tgt].actv_offset;
pval = sdp->isp_devparam[tgt].actv_period;
} else {
dval = sdp->isp_devparam[tgt].nvrm_flags;
oval = sdp->isp_devparam[tgt].nvrm_offset;
pval = sdp->isp_devparam[tgt].nvrm_period;
}
#ifndef CAM_NEW_TRAN_CODE
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if (dval & DPARM_DISC) {
cts->flags |= CCB_TRANS_DISC_ENB;
}
if (dval & DPARM_TQING) {
cts->flags |= CCB_TRANS_TAG_ENB;
}
if (dval & DPARM_WIDE) {
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
cts->valid = CCB_TRANS_BUS_WIDTH_VALID |
CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if ((dval & DPARM_SYNC) && oval != 0) {
cts->sync_period = pval;
cts->sync_offset = oval;
cts->valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
#else
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_SPI;
cts->transport_version = 2;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
if (dval & DPARM_DISC) {
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
}
if (dval & DPARM_TQING) {
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
}
if ((dval & DPARM_SYNC) && oval && pval) {
spi->sync_offset = oval;
spi->sync_period = pval;
spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
spi->valid |= CTS_SPI_VALID_SYNC_RATE;
}
spi->valid |= CTS_SPI_VALID_BUS_WIDTH;
if (dval & DPARM_WIDE) {
spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
scsi->valid = CTS_SCSI_VALID_TQ;
spi->valid |= CTS_SPI_VALID_DISC;
} else {
scsi->valid = 0;
}
#endif
isp_prt(isp, ISP_LOGDEBUG0,
"GET %s bus %d targ %d to flags %x off %x per %x",
IS_CURRENT_SETTINGS(cts)? "ACTIVE" : "NVRAM",
bus, tgt, dval, oval, pval);
}
ISPLOCK_2_CAMLOCK(isp);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t secs_per_cylinder;
u_int32_t size_mb;
ccg = &ccb->ccg;
if (ccg->block_size == 0) {
isp_prt(isp, ISP_LOGERR,
"%d.%d XPT_CALC_GEOMETRY block size 0?",
ccg->ccb_h.target_id, ccg->ccb_h.target_lun);
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
size_mb = ccg->volume_size /((1024L * 1024L) / ccg->block_size);
if (size_mb > 1024) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified bus */
bus = cam_sim_bus(sim);
CAMLOCK_2_ISPLOCK(isp);
error = isp_control(isp, ISPCTL_RESET_BUS, &bus);
ISPLOCK_2_CAMLOCK(isp);
if (error)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
else {
if (cam_sim_bus(sim) && isp->isp_path2 != NULL)
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
else if (isp->isp_path != NULL)
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_TERM_IO: /* Terminate the I/O process */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
#ifdef ISP_TARGET_MODE
cpi->target_sprt = PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO;
#else
cpi->target_sprt = 0;
#endif
cpi->hba_eng_cnt = 0;
cpi->max_target = ISP_MAX_TARGETS(isp) - 1;
cpi->max_lun = ISP_MAX_LUNS(isp) - 1;
cpi->bus_id = cam_sim_bus(sim);
if (IS_FC(isp)) {
cpi->hba_misc = PIM_NOBUSRESET;
/*
* Because our loop ID can shift from time to time,
* make our initiator ID out of range of our bus.
*/
cpi->initiator_id = cpi->max_target + 1;
/*
* Set base transfer capabilities for Fibre Channel.
* Technically not correct because we don't know
* what media we're running on top of- but we'll
* look good if we always say 100MB/s.
*/
cpi->base_transfer_speed = 100000;
cpi->hba_inquiry = PI_TAG_ABLE;
#ifdef CAM_NEW_TRAN_CODE
cpi->transport = XPORT_FC;
cpi->transport_version = 0; /* WHAT'S THIS FOR? */
#endif
} else {
sdparam *sdp = isp->isp_param;
sdp += cam_sim_bus(xpt_path_sim(cpi->ccb_h.path));
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->hba_misc = 0;
cpi->initiator_id = sdp->isp_initiator_id;
cpi->base_transfer_speed = 3300;
#ifdef CAM_NEW_TRAN_CODE
cpi->transport = XPORT_SPI;
cpi->transport_version = 2; /* WHAT'S THIS FOR? */
#endif
}
#ifdef CAM_NEW_TRAN_CODE
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
#endif
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Qlogic", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
#define ISPDDB (CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
void
isp_done(struct ccb_scsiio *sccb)
{
struct ispsoftc *isp = XS_ISP(sccb);
if (XS_NOERR(sccb))
XS_SETERR(sccb, CAM_REQ_CMP);
if ((sccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
(sccb->scsi_status != SCSI_STATUS_OK)) {
sccb->ccb_h.status &= ~CAM_STATUS_MASK;
if ((sccb->scsi_status == SCSI_STATUS_CHECK_COND) &&
(sccb->ccb_h.status & CAM_AUTOSNS_VALID) == 0) {
sccb->ccb_h.status |= CAM_AUTOSENSE_FAIL;
} else {
sccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
}
}
sccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if ((sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
sccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(sccb->ccb_h.path, 1);
if (sccb->scsi_status != SCSI_STATUS_OK)
isp_prt(isp, ISP_LOGDEBUG2,
"freeze devq %d.%d %x %x",
sccb->ccb_h.target_id,
sccb->ccb_h.target_lun, sccb->ccb_h.status,
sccb->scsi_status);
}
}
/*
* If we were frozen waiting resources, clear that we were frozen
* waiting for resources. If we are no longer frozen, and the devq
* isn't frozen, mark the completing CCB to have the XPT layer
* release the simq.
*/
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
if (isp->isp_osinfo.simqfrozen == 0) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done->relsimq");
sccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done->devq frozen");
}
} else {
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done -> simqfrozen = %x",
isp->isp_osinfo.simqfrozen);
}
}
if ((CAM_DEBUGGED(sccb->ccb_h.path, ISPDDB)) &&
(sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
xpt_print_path(sccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO,
"cam completion status 0x%x", sccb->ccb_h.status);
}
XS_CMD_S_DONE(sccb);
if (XS_CMD_WDOG_P(sccb) == 0) {
untimeout(isp_watchdog, (caddr_t)sccb, sccb->ccb_h.timeout_ch);
if (XS_CMD_GRACE_P(sccb)) {
isp_prt(isp, ISP_LOGDEBUG2,
"finished command on borrowed time");
}
XS_CMD_S_CLEAR(sccb);
ISPLOCK_2_CAMLOCK(isp);
xpt_done((union ccb *) sccb);
CAMLOCK_2_ISPLOCK(isp);
}
}
int
isp_async(struct ispsoftc *isp, ispasync_t cmd, void *arg)
{
int bus, rv = 0;
switch (cmd) {
case ISPASYNC_NEW_TGT_PARAMS:
{
#ifdef CAM_NEW_TRAN_CODE
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
#endif
int flags, tgt;
sdparam *sdp = isp->isp_param;
struct ccb_trans_settings cts;
struct cam_path *tmppath;
bzero(&cts, sizeof (struct ccb_trans_settings));
tgt = *((int *)arg);
bus = (tgt >> 16) & 0xffff;
tgt &= 0xffff;
sdp += bus;
ISPLOCK_2_CAMLOCK(isp);
if (xpt_create_path(&tmppath, NULL,
cam_sim_path(bus? isp->isp_sim2 : isp->isp_sim),
tgt, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
CAMLOCK_2_ISPLOCK(isp);
isp_prt(isp, ISP_LOGWARN,
"isp_async cannot make temp path for %d.%d",
tgt, bus);
rv = -1;
break;
}
CAMLOCK_2_ISPLOCK(isp);
flags = sdp->isp_devparam[tgt].actv_flags;
#ifdef CAM_NEW_TRAN_CODE
cts.type = CTS_TYPE_CURRENT_SETTINGS;
cts.protocol = PROTO_SCSI;
cts.transport = XPORT_SPI;
scsi = &cts.proto_specific.scsi;
spi = &cts.xport_specific.spi;
if (flags & DPARM_TQING) {
scsi->valid |= CTS_SCSI_VALID_TQ;
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
spi->flags |= CTS_SPI_FLAGS_TAG_ENB;
}
if (flags & DPARM_DISC) {
spi->valid |= CTS_SPI_VALID_DISC;
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
}
spi->flags |= CTS_SPI_VALID_BUS_WIDTH;
if (flags & DPARM_WIDE) {
spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
if (flags & DPARM_SYNC) {
spi->valid |= CTS_SPI_VALID_SYNC_RATE;
spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
spi->sync_period = sdp->isp_devparam[tgt].actv_period;
spi->sync_offset = sdp->isp_devparam[tgt].actv_offset;
}
#else
cts.flags = CCB_TRANS_CURRENT_SETTINGS;
cts.valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if (flags & DPARM_DISC) {
cts.flags |= CCB_TRANS_DISC_ENB;
}
if (flags & DPARM_TQING) {
cts.flags |= CCB_TRANS_TAG_ENB;
}
cts.valid |= CCB_TRANS_BUS_WIDTH_VALID;
cts.bus_width = (flags & DPARM_WIDE)?
MSG_EXT_WDTR_BUS_8_BIT : MSG_EXT_WDTR_BUS_16_BIT;
cts.sync_period = sdp->isp_devparam[tgt].actv_period;
cts.sync_offset = sdp->isp_devparam[tgt].actv_offset;
if (flags & DPARM_SYNC) {
cts.valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
#endif
isp_prt(isp, ISP_LOGDEBUG2,
"NEW_TGT_PARAMS bus %d tgt %d period %x offset %x flags %x",
bus, tgt, sdp->isp_devparam[tgt].actv_period,
sdp->isp_devparam[tgt].actv_offset, flags);
xpt_setup_ccb(&cts.ccb_h, tmppath, 1);
ISPLOCK_2_CAMLOCK(isp);
xpt_async(AC_TRANSFER_NEG, tmppath, &cts);
xpt_free_path(tmppath);
CAMLOCK_2_ISPLOCK(isp);
break;
}
case ISPASYNC_BUS_RESET:
bus = *((int *)arg);
isp_prt(isp, ISP_LOGINFO, "SCSI bus reset on bus %d detected",
bus);
if (bus > 0 && isp->isp_path2) {
ISPLOCK_2_CAMLOCK(isp);
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
CAMLOCK_2_ISPLOCK(isp);
} else if (isp->isp_path) {
ISPLOCK_2_CAMLOCK(isp);
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
CAMLOCK_2_ISPLOCK(isp);
}
break;
case ISPASYNC_LIP:
if (isp->isp_path) {
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0, "LIP freeze simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
}
isp_prt(isp, ISP_LOGINFO, "LIP Received");
break;
case ISPASYNC_LOOP_RESET:
if (isp->isp_path) {
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0,
"Loop Reset freeze simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
}
isp_prt(isp, ISP_LOGINFO, "Loop Reset Received");
break;
case ISPASYNC_LOOP_DOWN:
if (isp->isp_path) {
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0,
"loop down freeze simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
}
isp_prt(isp, ISP_LOGINFO, "Loop DOWN");
break;
case ISPASYNC_LOOP_UP:
/*
* Now we just note that Loop has come up. We don't
* actually do anything because we're waiting for a
* Change Notify before activating the FC cleanup
* thread to look at the state of the loop again.
*/
isp_prt(isp, ISP_LOGINFO, "Loop UP");
break;
case ISPASYNC_PROMENADE:
{
struct cam_path *tmppath;
const char *fmt = "Target %d (Loop 0x%x) Port ID 0x%x "
"(role %s) %s\n Port WWN 0x%08x%08x\n Node WWN 0x%08x%08x";
static const char *roles[4] = {
"(none)", "Target", "Initiator", "Target/Initiator"
};
fcparam *fcp = isp->isp_param;
int tgt = *((int *) arg);
int is_tgt_mask = (SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT);
struct lportdb *lp = &fcp->portdb[tgt];
isp_prt(isp, ISP_LOGINFO, fmt, tgt, lp->loopid, lp->portid,
roles[lp->roles & 0x3],
(lp->valid)? "Arrived" : "Departed",
(u_int32_t) (lp->port_wwn >> 32),
(u_int32_t) (lp->port_wwn & 0xffffffffLL),
(u_int32_t) (lp->node_wwn >> 32),
(u_int32_t) (lp->node_wwn & 0xffffffffLL));
ISPLOCK_2_CAMLOCK(isp);
if (xpt_create_path(&tmppath, NULL, cam_sim_path(isp->isp_sim),
(target_id_t)tgt, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
CAMLOCK_2_ISPLOCK(isp);
break;
}
/*
* Policy: only announce targets.
*/
if (lp->roles & is_tgt_mask) {
if (lp->valid) {
xpt_async(AC_FOUND_DEVICE, tmppath, NULL);
} else {
xpt_async(AC_LOST_DEVICE, tmppath, NULL);
}
}
xpt_free_path(tmppath);
CAMLOCK_2_ISPLOCK(isp);
break;
}
case ISPASYNC_CHANGE_NOTIFY:
if (arg == ISPASYNC_CHANGE_PDB) {
isp_prt(isp, ISP_LOGINFO,
"Port Database Changed");
} else if (arg == ISPASYNC_CHANGE_SNS) {
isp_prt(isp, ISP_LOGINFO,
"Name Server Database Changed");
}
cv_signal(&isp->isp_osinfo.kthread_cv);
break;
case ISPASYNC_FABRIC_DEV:
{
int target, lrange;
struct lportdb *lp = NULL;
char *pt;
sns_ganrsp_t *resp = (sns_ganrsp_t *) arg;
u_int32_t portid;
u_int64_t wwpn, wwnn;
fcparam *fcp = isp->isp_param;
portid =
(((u_int32_t) resp->snscb_port_id[0]) << 16) |
(((u_int32_t) resp->snscb_port_id[1]) << 8) |
(((u_int32_t) resp->snscb_port_id[2]));
wwpn =
(((u_int64_t)resp->snscb_portname[0]) << 56) |
(((u_int64_t)resp->snscb_portname[1]) << 48) |
(((u_int64_t)resp->snscb_portname[2]) << 40) |
(((u_int64_t)resp->snscb_portname[3]) << 32) |
(((u_int64_t)resp->snscb_portname[4]) << 24) |
(((u_int64_t)resp->snscb_portname[5]) << 16) |
(((u_int64_t)resp->snscb_portname[6]) << 8) |
(((u_int64_t)resp->snscb_portname[7]));
wwnn =
(((u_int64_t)resp->snscb_nodename[0]) << 56) |
(((u_int64_t)resp->snscb_nodename[1]) << 48) |
(((u_int64_t)resp->snscb_nodename[2]) << 40) |
(((u_int64_t)resp->snscb_nodename[3]) << 32) |
(((u_int64_t)resp->snscb_nodename[4]) << 24) |
(((u_int64_t)resp->snscb_nodename[5]) << 16) |
(((u_int64_t)resp->snscb_nodename[6]) << 8) |
(((u_int64_t)resp->snscb_nodename[7]));
if (portid == 0 || wwpn == 0) {
break;
}
switch (resp->snscb_port_type) {
case 1:
pt = " N_Port";
break;
case 2:
pt = " NL_Port";
break;
case 3:
pt = "F/NL_Port";
break;
case 0x7f:
pt = " Nx_Port";
break;
case 0x81:
pt = " F_port";
break;
case 0x82:
pt = " FL_Port";
break;
case 0x84:
pt = " E_port";
break;
default:
pt = "?";
break;
}
isp_prt(isp, ISP_LOGINFO,
"%s @ 0x%x, Node 0x%08x%08x Port %08x%08x",
pt, portid, ((u_int32_t) (wwnn >> 32)), ((u_int32_t) wwnn),
((u_int32_t) (wwpn >> 32)), ((u_int32_t) wwpn));
/*
* We're only interested in SCSI_FCP types (for now)
*/
if ((resp->snscb_fc4_types[2] & 1) == 0) {
break;
}
if (fcp->isp_topo != TOPO_F_PORT)
lrange = FC_SNS_ID+1;
else
lrange = 0;
/*
* Is it already in our list?
*/
for (target = lrange; target < MAX_FC_TARG; target++) {
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
continue;
}
lp = &fcp->portdb[target];
if (lp->port_wwn == wwpn && lp->node_wwn == wwnn) {
lp->fabric_dev = 1;
break;
}
}
if (target < MAX_FC_TARG) {
break;
}
for (target = lrange; target < MAX_FC_TARG; target++) {
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
continue;
}
lp = &fcp->portdb[target];
if (lp->port_wwn == 0) {
break;
}
}
if (target == MAX_FC_TARG) {
isp_prt(isp, ISP_LOGWARN,
"no more space for fabric devices");
break;
}
lp->node_wwn = wwnn;
lp->port_wwn = wwpn;
lp->portid = portid;
lp->fabric_dev = 1;
break;
}
#ifdef ISP_TARGET_MODE
case ISPASYNC_TARGET_MESSAGE:
{
tmd_msg_t *mp = arg;
isp_prt(isp, ISP_LOGALL,
"bus %d iid %d tgt %d lun %d ttype %x tval %x msg[0]=%x",
mp->nt_bus, (int) mp->nt_iid, (int) mp->nt_tgt,
(int) mp->nt_lun, mp->nt_tagtype, mp->nt_tagval,
mp->nt_msg[0]);
break;
}
case ISPASYNC_TARGET_EVENT:
{
tmd_event_t *ep = arg;
isp_prt(isp, ISP_LOGALL,
"bus %d event code 0x%x", ep->ev_bus, ep->ev_event);
break;
}
case ISPASYNC_TARGET_ACTION:
switch (((isphdr_t *)arg)->rqs_entry_type) {
default:
isp_prt(isp, ISP_LOGWARN,
"event 0x%x for unhandled target action",
((isphdr_t *)arg)->rqs_entry_type);
break;
case RQSTYPE_ATIO:
rv = isp_handle_platform_atio(isp, (at_entry_t *) arg);
break;
case RQSTYPE_ATIO2:
rv = isp_handle_platform_atio2(isp, (at2_entry_t *)arg);
break;
case RQSTYPE_CTIO2:
case RQSTYPE_CTIO:
rv = isp_handle_platform_ctio(isp, arg);
break;
case RQSTYPE_ENABLE_LUN:
case RQSTYPE_MODIFY_LUN:
if (IS_DUALBUS(isp)) {
bus =
GET_BUS_VAL(((lun_entry_t *)arg)->le_rsvd);
} else {
bus = 0;
}
isp_cv_signal_rqe(isp, bus,
((lun_entry_t *)arg)->le_status);
break;
}
break;
#endif
case ISPASYNC_FW_CRASH:
{
u_int16_t mbox1, mbox6;
mbox1 = ISP_READ(isp, OUTMAILBOX1);
if (IS_DUALBUS(isp)) {
mbox6 = ISP_READ(isp, OUTMAILBOX6);
} else {
mbox6 = 0;
}
isp_prt(isp, ISP_LOGERR,
"Internal Firmware on bus %d Error @ RISC Address 0x%x",
mbox6, mbox1);
isp_reinit(isp);
break;
}
case ISPASYNC_UNHANDLED_RESPONSE:
break;
default:
isp_prt(isp, ISP_LOGERR, "unknown isp_async event %d", cmd);
break;
}
return (rv);
}
/*
* Locks are held before coming here.
*/
void
isp_uninit(struct ispsoftc *isp)
{
ISP_WRITE(isp, HCCR, HCCR_CMD_RESET);
DISABLE_INTS(isp);
}
void
isp_prt(struct ispsoftc *isp, int level, const char *fmt, ...)
{
va_list ap;
if (level != ISP_LOGALL && (level & isp->isp_dblev) == 0) {
return;
}
printf("%s: ", device_get_nameunit(isp->isp_dev));
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
printf("\n");
}