Nick Hibma b5cf22188d I got the CAM numbers (path id's, buses, unit numbers) and newbus ... unit numbers all wrong. This did not show up because most of them where zero anyway. Use a separate buffer for command transforms instead of fiddling with the existing cdb_bytes. Take CAM_CDB_POINTER into account. Nobody is using it, but someone might in the future. Be more picky about what to accept in the UFI command set. First attempt at implementing the ATAPI command protocol transforms. This should at least make Imation Superdisk and other e-Shuttle based devices show as attached. Maybe they even work to some extent.		2000-04-02 16:59:16 +00:00
..
advansys	adv_pci.c:	2000-03-02 00:08:35 +00:00
aha	More pnpids.	2000-03-25 03:24:43 +00:00
ahb	Remove #include "eisa.h" and #if NEISA > 0	2000-01-29 18:22:33 +00:00
aic	- Added PC-98 Cbus frontend.	2000-03-29 14:32:34 +00:00
aic7xxx	o Correct the offsets into the syncrate table for paritcular	2000-03-18 22:28:20 +00:00
amd	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
amr	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
an
ar	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
ata	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
atkbdc	- Add temporary workaround to fool some "clever" KVM switch products	2000-04-02 08:28:21 +00:00
bktr	The Leadtek Winfast TV2000 has one of the FM capable Tuners. Don't	2000-02-12 08:49:21 +00:00
buslogic	Remove #include "eisa.h" and #if NEISA > 0 - this is guaranteed by config.	2000-01-29 14:27:26 +00:00
cardbus
ccd	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
cs	NewBus the cs driver.	2000-03-30 05:16:16 +00:00
cy	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
dc	Teach the 'dc' driver how to pick up settings left over by the	2000-03-11 05:20:56 +00:00
de	A fairly simple newbusification of if_de	2000-03-20 09:18:46 +00:00
dec
dgb	Remove #if NDGB > 0 and #if NDGM > 0	2000-01-29 18:42:45 +00:00
dpt	Remove #include "eisa.h" and #if NEISA > 0 as it's only ever compiled	2000-01-29 14:31:57 +00:00
ed	Bogusly returned zero always. Return 1 if we pass the checksum.	2000-03-20 23:29:27 +00:00
eisa
en	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
ep	Fix a problem that caused TCP fragments to be lost (among other things.)	2000-03-24 23:31:42 +00:00
ex	Add 'bootverbose' debug messages to assist with tracking down problems	2000-03-13 12:27:21 +00:00
fb	Remove #include "vga.h" and #if NVGA > 0 as it's implied by config.	2000-01-29 14:43:47 +00:00
fdc	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
fe	Ratoc REX-9880/83 support (PC-98 only). This commit added functions	2000-03-29 12:44:19 +00:00
fxp	Added support for cards and on-motherboard NICs that use an SEEPROM	2000-03-28 04:41:42 +00:00
hea
hfa
ic
ida	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
ie	Remove #if NIE > 0 test, it's guaranteed to be true by config.	2000-01-29 14:41:52 +00:00
iicbus
isp	roll platform versions to 5.0	2000-03-15 18:49:44 +00:00
joy
kbd	- Properly keep track of I/O port resources.	2000-03-19 03:25:13 +00:00
lnc	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
mc146818
mca	Set the RF_SHAREABLE flage when we allocate an IRQ.	2000-03-13 11:43:53 +00:00
mcd	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
md	Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new	2000-03-20 10:44:49 +00:00
mii
mlx	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
mse	- `Newbus'ified the driver.	2000-03-18 15:13:30 +00:00
pccard	Minor changes to some of the interfaces.	2000-03-26 07:01:52 +00:00
pcf
pci	Unused definitions.	2000-03-20 08:21:52 +00:00
pcic	Correct PnP ids for pcic-like cards.	2000-03-10 05:26:32 +00:00
pdq
ppbus	Isolate the Timecounter internals in their own two files.	2000-03-20 14:09:06 +00:00
ppc	Remove #include "ppc.h" and #if NPPC > 0 - this is always true as it is	2000-01-29 14:02:30 +00:00
ray	Add signal strength cache structures.	2000-03-31 20:13:03 +00:00
rc	Remove #if NFOO > 0 (it's not required in most cases) and also where it	2000-01-29 16:00:34 +00:00
rp
scd	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
sf
si	Always leave SP_DCEN on (monitor DCD). Otherwise the firmware *really*	2000-01-25 16:45:54 +00:00
sio	Add support for pci modems. ONLY CONTROLLER BASED MODEMS. This	2000-04-01 06:14:21 +00:00
sk
smbus
sn	Don't execute MAC address initialization for non-pccard sn devices.	2000-01-22 17:24:16 +00:00
snp	Unstaticize this driver. You can have as many snoop devices as you can	2000-04-02 00:35:37 +00:00
sound	unfinished sblive driver, playback/mixer only for now - not enabled in	2000-04-02 07:41:17 +00:00
speaker	Remove #if NFOO > 0 (it's not required in most cases) and also where it	2000-01-29 16:00:34 +00:00
sr	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
streams
sym	This new driver version uses the DMA mapping interface	2000-04-02 10:07:54 +00:00
syscons	- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor.	2000-03-31 16:05:46 +00:00
ti	Add support for offloading IP/TCP/UDP checksums to NIC hardware which	2000-03-27 19:14:27 +00:00
tx
usb	I got the CAM numbers (path id's, buses, unit numbers) and newbus	2000-04-02 16:59:16 +00:00
vinum	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
vn	Move B_ERROR flag to b_ioflags and call it BIO_ERROR.	2000-04-02 15:24:56 +00:00
vr
vx	Remove #if NVX > 0 and #if NEISA > 0 (and #include "eisa.h") as it's not	2000-01-29 14:50:32 +00:00
wi	Modify if_wi.c to call bpfdetach(ifp) before if_detach(ifp), so as to	2000-03-19 05:46:50 +00:00
wl
xe	Remove #if 0'ed reference to isa_device->id_alive	2000-01-23 18:21:20 +00:00