e84c87915b
- Clear out an_dma_vaddr on free so we can test to see if dma is setup when the card is kldunloaded/kldloaded etc. only for MPI350 - Use a common detach like wi(4) - Notify on RID read overflow and truncate this currently causes a panic in -stable when the stack during an ifconfig an0 is done with newer firmware - Convert from UNLOCK/tsleep/LOCK to msleep. I thought I did that a while ago.
799 lines
25 KiB
C
799 lines
25 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _IF_AIRONET_IEEE_H
|
|
#define _IF_AIRONET_IEEE_H
|
|
|
|
/*
|
|
* This header defines a simple command interface to the FreeBSD
|
|
* Aironet driver (an) driver, which is used to set certain
|
|
* device-specific parameters which can't be easily managed through
|
|
* ifconfig(8). No, sysctl(2) is not the answer. I said a _simple_
|
|
* interface, didn't I.
|
|
*/
|
|
|
|
#ifndef SIOCSAIRONET
|
|
#define SIOCSAIRONET SIOCSIFGENERIC
|
|
#endif
|
|
|
|
#ifndef SIOCGAIRONET
|
|
#define SIOCGAIRONET SIOCGIFGENERIC
|
|
#endif
|
|
|
|
/*
|
|
* This is a make-predend RID value used only by the driver
|
|
* to allow the user to set the speed.
|
|
*/
|
|
#define AN_RID_TX_SPEED 0x1234
|
|
|
|
/*
|
|
* Technically I don't think there's a limit to a record
|
|
* length. The largest record is the one that contains the CIS
|
|
* data, which is 240 words long, so 256 should be a safe
|
|
* value.
|
|
*/
|
|
#define AN_MAX_DATALEN 4096
|
|
|
|
struct an_req {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
u_int16_t an_val[AN_MAX_DATALEN];
|
|
};
|
|
|
|
/*
|
|
* Private LTV records (interpreted only by the driver). This is
|
|
* a minor kludge to allow reading the interface statistics from
|
|
* the driver.
|
|
*/
|
|
#define AN_RID_IFACE_STATS 0x0100
|
|
#define AN_RID_MGMT_XMIT 0x0200
|
|
#ifdef ANCACHE
|
|
#define AN_RID_ZERO_CACHE 0x0300
|
|
#define AN_RID_READ_CACHE 0x0400
|
|
#endif
|
|
|
|
#define AN_FCTL_VERS 0x0002
|
|
#define AN_FCTL_FTYPE 0x000C
|
|
#define AN_FCTL_STYPE 0x00F0
|
|
#define AN_FCTL_TODS 0x0100
|
|
#define AN_FCTL_FROMDS 0x0200
|
|
#define AN_FCTL_MOREFRAGS 0x0400
|
|
#define AN_FCTL_RETRY 0x0800
|
|
#define AN_FCTL_PM 0x1000
|
|
#define AN_FCTL_MOREDATA 0x2000
|
|
#define AN_FCTL_WEP 0x4000
|
|
#define AN_FCTL_ORDER 0x8000
|
|
|
|
#define AN_FTYPE_MGMT 0x0000
|
|
#define AN_FTYPE_CTL 0x0004
|
|
#define AN_FTYPE_DATA 0x0008
|
|
|
|
#define AN_STYPE_MGMT_ASREQ 0x0000 /* association request */
|
|
#define AN_STYPE_MGMT_ASRESP 0x0010 /* association response */
|
|
#define AN_STYPE_MGMT_REASREQ 0x0020 /* reassociation request */
|
|
#define AN_STYPE_MGMT_REASRESP 0x0030 /* reassociation response */
|
|
#define AN_STYPE_MGMT_PROBEREQ 0x0040 /* probe request */
|
|
#define AN_STYPE_MGMT_PROBERESP 0x0050 /* probe response */
|
|
#define AN_STYPE_MGMT_BEACON 0x0080 /* beacon */
|
|
#define AN_STYPE_MGMT_ATIM 0x0090 /* announcement traffic ind msg */
|
|
#define AN_STYPE_MGMT_DISAS 0x00A0 /* disassociation */
|
|
#define AN_STYPE_MGMT_AUTH 0x00B0 /* authentication */
|
|
#define AN_STYPE_MGMT_DEAUTH 0x00C0 /* deauthentication */
|
|
|
|
/*
|
|
* Aironet IEEE signal strength cache
|
|
*
|
|
* driver keeps cache of last
|
|
* MAXANCACHE packets to arrive including signal strength info.
|
|
* daemons may read this via ioctl
|
|
*
|
|
* Each entry in the wi_sigcache has a unique macsrc.
|
|
*/
|
|
#ifdef ANCACHE
|
|
#define MAXANCACHE 10
|
|
|
|
struct an_sigcache {
|
|
char macsrc[6]; /* unique MAC address for entry */
|
|
int ipsrc; /* ip address associated with packet */
|
|
int signal; /* signal strength of the packet */
|
|
int noise; /* noise value */
|
|
int quality; /* quality of the packet */
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* The card provides an 8-bit signal strength value (RSSI), which can
|
|
* be converted to a dBm power value (or a percent) using a table in
|
|
* the card's firmware (when available). The tables are slightly
|
|
* different in individual cards, even of the same model. If the
|
|
* table is not available, the mapping can be approximated by dBm =
|
|
* RSSI - 100. This approximation can be seen by plotting a few
|
|
* tables, and also matches some info on the Intersil web site (I
|
|
* think they make the RF front end for the cards. However, the linux
|
|
* driver uses the approximation dBm = RSSI/2 - 95. I think that is
|
|
* just wrong.
|
|
*/
|
|
|
|
struct an_rssi_entry {
|
|
u_int8_t an_rss_pct;
|
|
u_int8_t an_rss_dbm;
|
|
};
|
|
|
|
|
|
struct an_ltv_key {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
u_int16_t kindex;
|
|
u_int8_t mac[6];
|
|
u_int16_t klen;
|
|
u_int8_t key[16]; /* 128-bit keys */
|
|
};
|
|
|
|
struct an_ltv_stats {
|
|
u_int16_t an_fudge;
|
|
u_int16_t an_len; /* 0x00 */
|
|
u_int16_t an_type; /* 0xXX */
|
|
u_int16_t an_spacer; /* 0x02 */
|
|
u_int32_t an_rx_overruns; /* 0x04 */
|
|
u_int32_t an_rx_plcp_csum_errs; /* 0x08 */
|
|
u_int32_t an_rx_plcp_format_errs; /* 0x0C */
|
|
u_int32_t an_rx_plcp_len_errs; /* 0x10 */
|
|
u_int32_t an_rx_mac_crc_errs; /* 0x14 */
|
|
u_int32_t an_rx_mac_crc_ok; /* 0x18 */
|
|
u_int32_t an_rx_wep_errs; /* 0x1C */
|
|
u_int32_t an_rx_wep_ok; /* 0x20 */
|
|
u_int32_t an_retry_long; /* 0x24 */
|
|
u_int32_t an_retry_short; /* 0x28 */
|
|
u_int32_t an_retry_max; /* 0x2C */
|
|
u_int32_t an_no_ack; /* 0x30 */
|
|
u_int32_t an_no_cts; /* 0x34 */
|
|
u_int32_t an_rx_ack_ok; /* 0x38 */
|
|
u_int32_t an_rx_cts_ok; /* 0x3C */
|
|
u_int32_t an_tx_ack_ok; /* 0x40 */
|
|
u_int32_t an_tx_rts_ok; /* 0x44 */
|
|
u_int32_t an_tx_cts_ok; /* 0x48 */
|
|
u_int32_t an_tx_lmac_mcasts; /* 0x4C */
|
|
u_int32_t an_tx_lmac_bcasts; /* 0x50 */
|
|
u_int32_t an_tx_lmac_ucast_frags; /* 0x54 */
|
|
u_int32_t an_tx_lmac_ucasts; /* 0x58 */
|
|
u_int32_t an_tx_beacons; /* 0x5C */
|
|
u_int32_t an_rx_beacons; /* 0x60 */
|
|
u_int32_t an_tx_single_cols; /* 0x64 */
|
|
u_int32_t an_tx_multi_cols; /* 0x68 */
|
|
u_int32_t an_tx_defers_no; /* 0x6C */
|
|
u_int32_t an_tx_defers_prot; /* 0x70 */
|
|
u_int32_t an_tx_defers_energy; /* 0x74 */
|
|
u_int32_t an_rx_dups; /* 0x78 */
|
|
u_int32_t an_rx_partial; /* 0x7C */
|
|
u_int32_t an_tx_too_old; /* 0x80 */
|
|
u_int32_t an_rx_too_old; /* 0x84 */
|
|
u_int32_t an_lostsync_max_retries;/* 0x88 */
|
|
u_int32_t an_lostsync_missed_beacons;/* 0x8C */
|
|
u_int32_t an_lostsync_arl_exceeded;/*0x90 */
|
|
u_int32_t an_lostsync_deauthed; /* 0x94 */
|
|
u_int32_t an_lostsync_disassociated;/*0x98 */
|
|
u_int32_t an_lostsync_tsf_timing; /* 0x9C */
|
|
u_int32_t an_tx_host_mcasts; /* 0xA0 */
|
|
u_int32_t an_tx_host_bcasts; /* 0xA4 */
|
|
u_int32_t an_tx_host_ucasts; /* 0xA8 */
|
|
u_int32_t an_tx_host_failed; /* 0xAC */
|
|
u_int32_t an_rx_host_mcasts; /* 0xB0 */
|
|
u_int32_t an_rx_host_bcasts; /* 0xB4 */
|
|
u_int32_t an_rx_host_ucasts; /* 0xB8 */
|
|
u_int32_t an_rx_host_discarded; /* 0xBC */
|
|
u_int32_t an_tx_hmac_mcasts; /* 0xC0 */
|
|
u_int32_t an_tx_hmac_bcasts; /* 0xC4 */
|
|
u_int32_t an_tx_hmac_ucasts; /* 0xC8 */
|
|
u_int32_t an_tx_hmac_failed; /* 0xCC */
|
|
u_int32_t an_rx_hmac_mcasts; /* 0xD0 */
|
|
u_int32_t an_rx_hmac_bcasts; /* 0xD4 */
|
|
u_int32_t an_rx_hmac_ucasts; /* 0xD8 */
|
|
u_int32_t an_rx_hmac_discarded; /* 0xDC */
|
|
u_int32_t an_tx_hmac_accepted; /* 0xE0 */
|
|
u_int32_t an_ssid_mismatches; /* 0xE4 */
|
|
u_int32_t an_ap_mismatches; /* 0xE8 */
|
|
u_int32_t an_rates_mismatches; /* 0xEC */
|
|
u_int32_t an_auth_rejects; /* 0xF0 */
|
|
u_int32_t an_auth_timeouts; /* 0xF4 */
|
|
u_int32_t an_assoc_rejects; /* 0xF8 */
|
|
u_int32_t an_assoc_timeouts; /* 0xFC */
|
|
u_int32_t an_reason_outside_table;/* 0x100 */
|
|
u_int32_t an_reason1; /* 0x104 */
|
|
u_int32_t an_reason2; /* 0x108 */
|
|
u_int32_t an_reason3; /* 0x10C */
|
|
u_int32_t an_reason4; /* 0x110 */
|
|
u_int32_t an_reason5; /* 0x114 */
|
|
u_int32_t an_reason6; /* 0x118 */
|
|
u_int32_t an_reason7; /* 0x11C */
|
|
u_int32_t an_reason8; /* 0x120 */
|
|
u_int32_t an_reason9; /* 0x124 */
|
|
u_int32_t an_reason10; /* 0x128 */
|
|
u_int32_t an_reason11; /* 0x12C */
|
|
u_int32_t an_reason12; /* 0x130 */
|
|
u_int32_t an_reason13; /* 0x134 */
|
|
u_int32_t an_reason14; /* 0x138 */
|
|
u_int32_t an_reason15; /* 0x13C */
|
|
u_int32_t an_reason16; /* 0x140 */
|
|
u_int32_t an_reason17; /* 0x144 */
|
|
u_int32_t an_reason18; /* 0x148 */
|
|
u_int32_t an_reason19; /* 0x14C */
|
|
u_int32_t an_rx_mgmt_pkts; /* 0x150 */
|
|
u_int32_t an_tx_mgmt_pkts; /* 0x154 */
|
|
u_int32_t an_rx_refresh_pkts; /* 0x158 */
|
|
u_int32_t an_tx_refresh_pkts; /* 0x15C */
|
|
u_int32_t an_rx_poll_pkts; /* 0x160 */
|
|
u_int32_t an_tx_poll_pkts; /* 0x164 */
|
|
u_int32_t an_host_retries; /* 0x168 */
|
|
u_int32_t an_lostsync_hostreq; /* 0x16C */
|
|
u_int32_t an_host_tx_bytes; /* 0x170 */
|
|
u_int32_t an_host_rx_bytes; /* 0x174 */
|
|
u_int32_t an_uptime_usecs; /* 0x178 */
|
|
u_int32_t an_uptime_secs; /* 0x17C */
|
|
u_int32_t an_lostsync_better_ap; /* 0x180 */
|
|
u_int32_t an_rsvd[15];
|
|
};
|
|
|
|
/*
|
|
* General configuration information.
|
|
*/
|
|
struct an_ltv_genconfig {
|
|
/* General configuration. */
|
|
u_int16_t an_len; /* 0x00 */
|
|
u_int16_t an_type; /* XXXX */
|
|
u_int16_t an_opmode; /* 0x02 */
|
|
u_int16_t an_rxmode; /* 0x04 */
|
|
u_int16_t an_fragthresh; /* 0x06 */
|
|
u_int16_t an_rtsthresh; /* 0x08 */
|
|
u_int8_t an_macaddr[6]; /* 0x0A */
|
|
u_int8_t an_rates[8]; /* 0x10 */
|
|
u_int16_t an_shortretry_limit; /* 0x18 */
|
|
u_int16_t an_longretry_limit; /* 0x1A */
|
|
u_int16_t an_tx_msdu_lifetime; /* 0x1C */
|
|
u_int16_t an_rx_msdu_lifetime; /* 0x1E */
|
|
u_int16_t an_stationary; /* 0x20 */
|
|
u_int16_t an_ordering; /* 0x22 */
|
|
u_int16_t an_devtype; /* 0x24 */
|
|
u_int16_t an_rsvd0[5]; /* 0x26 */
|
|
/* Scanning associating. */
|
|
u_int16_t an_scanmode; /* 0x30 */
|
|
u_int16_t an_probedelay; /* 0x32 */
|
|
u_int16_t an_probe_energy_timeout;/* 0x34 */
|
|
u_int16_t an_probe_response_timeout;/*0x36 */
|
|
u_int16_t an_beacon_listen_timeout;/*0x38 */
|
|
u_int16_t an_ibss_join_net_timeout;/*0x3A */
|
|
u_int16_t an_auth_timeout; /* 0x3C */
|
|
u_int16_t an_authtype; /* 0x3E */
|
|
u_int16_t an_assoc_timeout; /* 0x40 */
|
|
u_int16_t an_specified_ap_timeout;/* 0x42 */
|
|
u_int16_t an_offline_scan_interval;/*0x44 */
|
|
u_int16_t an_offline_scan_duration;/*0x46 */
|
|
u_int16_t an_link_loss_delay; /* 0x48 */
|
|
u_int16_t an_max_beacon_lost_time;/* 0x4A */
|
|
u_int16_t an_refresh_interval; /* 0x4C */
|
|
u_int16_t an_rsvd1; /* 0x4E */
|
|
/* Power save operation */
|
|
u_int16_t an_psave_mode; /* 0x50 */
|
|
u_int16_t an_sleep_for_dtims; /* 0x52 */
|
|
u_int16_t an_listen_interval; /* 0x54 */
|
|
u_int16_t an_fast_listen_interval;/* 0x56 */
|
|
u_int16_t an_listen_decay; /* 0x58 */
|
|
u_int16_t an_fast_listen_decay; /* 0x5A */
|
|
u_int16_t an_rsvd2[2]; /* 0x5C */
|
|
/* Ad-hoc (or AP) operation. */
|
|
u_int16_t an_beacon_period; /* 0x60 */
|
|
u_int16_t an_atim_duration; /* 0x62 */
|
|
u_int16_t an_rsvd3; /* 0x64 */
|
|
u_int16_t an_ds_channel; /* 0x66 */
|
|
u_int16_t an_rsvd4; /* 0x68 */
|
|
u_int16_t an_dtim_period; /* 0x6A */
|
|
u_int16_t an_rsvd5[2]; /* 0x6C */
|
|
/* Radio operation. */
|
|
u_int16_t an_radiotype; /* 0x70 */
|
|
u_int16_t an_diversity; /* 0x72 */
|
|
u_int16_t an_tx_power; /* 0x74 */
|
|
u_int16_t an_rss_thresh; /* 0x76 */
|
|
u_int16_t an_modulation_type; /* 0x78 */
|
|
u_int16_t an_short_preamble; /* 0x7A */
|
|
u_int16_t an_home_product; /* 0x7C */
|
|
u_int16_t an_rsvd6; /* 0x7E */
|
|
/* Aironet extensions. */
|
|
u_int8_t an_nodename[16]; /* 0x80 */
|
|
u_int16_t an_arl_thresh; /* 0x90 */
|
|
u_int16_t an_arl_decay; /* 0x92 */
|
|
u_int16_t an_arl_delay; /* 0x94 */
|
|
u_int8_t an_rsvd7; /* 0x96 */
|
|
u_int8_t an_rsvd8; /* 0x97 */
|
|
u_int8_t an_magic_packet_action; /* 0x98 */
|
|
u_int8_t an_magic_packet_ctl; /* 0x99 */
|
|
u_int16_t an_rsvd9;
|
|
u_int16_t an_spare[19];
|
|
};
|
|
|
|
#define AN_OPMODE_IBSS_ADHOC 0x0000
|
|
#define AN_OPMODE_INFRASTRUCTURE_STATION 0x0001
|
|
#define AN_OPMODE_AP 0x0002
|
|
#define AN_OPMODE_AP_REPEATER 0x0003
|
|
#define AN_OPMODE_UNMODIFIED_PAYLOAD 0x0100
|
|
#define AN_OPMODE_AIRONET_EXTENSIONS 0x0200
|
|
#define AN_OPMODE_AP_EXTENSIONS 0x0400
|
|
|
|
#define AN_RXMODE_BC_MC_ADDR 0x0000
|
|
#define AN_RXMODE_BC_ADDR 0x0001
|
|
#define AN_RXMODE_ADDR 0x0002
|
|
#define AN_RXMODE_80211_MONITOR_CURBSS 0x0003
|
|
#define AN_RXMODE_80211_MONITOR_ANYBSS 0x0004
|
|
#define AN_RXMODE_LAN_MONITOR_CURBSS 0x0005
|
|
#define AN_RXMODE_NO_8023_HEADER 0x0100
|
|
#define AN_RXMODE_NORMALIZED_RSSI 0x0200
|
|
|
|
#define AN_RATE_1MBPS 0x0002
|
|
#define AN_RATE_2MBPS 0x0004
|
|
#define AN_RATE_5_5MBPS 0x000B
|
|
#define AN_RATE_11MBPS 0x0016
|
|
|
|
#define AN_DEVTYPE_PC4500 0x0065
|
|
#define AN_DEVTYPE_PC4800 0x006D
|
|
|
|
#define AN_SCANMODE_ACTIVE 0x0000
|
|
#define AN_SCANMODE_PASSIVE 0x0001
|
|
#define AN_SCANMODE_AIRONET_ACTIVE 0x0002
|
|
|
|
#define AN_AUTHTYPE_NONE 0x0000
|
|
#define AN_AUTHTYPE_OPEN 0x0001
|
|
#define AN_AUTHTYPE_SHAREDKEY 0x0002
|
|
#define AN_AUTHTYPE_MASK 0x00ff
|
|
#define AN_AUTHTYPE_ENABLE 0x0100
|
|
#define AN_AUTHTYPE_PRIVACY_IN_USE 0x0100
|
|
#define AN_AUTHTYPE_ALLOW_UNENCRYPTED 0x0200
|
|
#define AN_AUTHTYPE_LEAP 0x1000
|
|
|
|
#define AN_PSAVE_NONE 0x0000
|
|
#define AN_PSAVE_CAM 0x0001
|
|
#define AN_PSAVE_PSP 0x0002
|
|
#define AN_PSAVE_PSP_CAM 0x0003
|
|
|
|
#define AN_RADIOTYPE_80211_FH 0x0001
|
|
#define AN_RADIOTYPE_80211_DS 0x0002
|
|
#define AN_RADIOTYPE_LM2000_DS 0x0004
|
|
|
|
#define AN_DIVERSITY_FACTORY_DEFAULT 0x0000
|
|
#define AN_DIVERSITY_ANTENNA_1_ONLY 0x0001
|
|
#define AN_DIVERSITY_ANTENNA_2_ONLY 0x0002
|
|
#define AN_DIVERSITY_ANTENNA_1_AND_2 0x0003
|
|
|
|
#define AN_TXPOWER_FACTORY_DEFAULT 0x0000
|
|
#define AN_TXPOWER_50MW 50
|
|
#define AN_TXPOWER_100MW 100
|
|
#define AN_TXPOWER_250MW 250
|
|
|
|
#define AN_HOME_NETWORK 0x0001
|
|
#define AN_HOME_INSTALL_AP 0x0002
|
|
|
|
/*
|
|
* Valid SSID list. You can specify up to three SSIDs denoting
|
|
* the service sets that you want to join. The first SSID always
|
|
* defaults to "tsunami" which is a handy way to detect the
|
|
* card.
|
|
*/
|
|
|
|
struct an_ltv_ssidlist {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
u_int16_t an_ssid1_len;
|
|
char an_ssid1[32];
|
|
u_int16_t an_ssid2_len;
|
|
char an_ssid2[32];
|
|
u_int16_t an_ssid3_len;
|
|
char an_ssid3[32];
|
|
};
|
|
|
|
struct an_ltv_ssid_entry{
|
|
u_int16_t an_len;
|
|
char an_ssid[32];
|
|
};
|
|
|
|
#define MAX_SSIDS 25
|
|
struct an_ltv_ssidlist_new {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
struct an_ltv_ssid_entry an_entry[MAX_SSIDS];
|
|
};
|
|
|
|
/*
|
|
* Valid AP list.
|
|
*/
|
|
struct an_ltv_aplist {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
u_int8_t an_ap1[8];
|
|
u_int8_t an_ap2[8];
|
|
u_int8_t an_ap3[8];
|
|
u_int8_t an_ap4[8];
|
|
};
|
|
|
|
/*
|
|
* Driver name.
|
|
*/
|
|
struct an_ltv_drvname {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
u_int8_t an_drvname[16];
|
|
};
|
|
|
|
/*
|
|
* Frame encapsulation.
|
|
*/
|
|
struct an_rid_encap {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
u_int16_t an_ethertype_default;
|
|
u_int16_t an_action_default;
|
|
u_int16_t an_ethertype0;
|
|
u_int16_t an_action0;
|
|
u_int16_t an_ethertype1;
|
|
u_int16_t an_action1;
|
|
u_int16_t an_ethertype2;
|
|
u_int16_t an_action2;
|
|
u_int16_t an_ethertype3;
|
|
u_int16_t an_action3;
|
|
u_int16_t an_ethertype4;
|
|
u_int16_t an_action4;
|
|
u_int16_t an_ethertype5;
|
|
u_int16_t an_action5;
|
|
u_int16_t an_ethertype6;
|
|
u_int16_t an_action6;
|
|
};
|
|
|
|
#define AN_ENCAP_ACTION_RX 0x0001
|
|
#define AN_ENCAP_ACTION_TX 0x0002
|
|
|
|
#define AN_RXENCAP_NONE 0x0000
|
|
#define AN_RXENCAP_RFC1024 0x0001
|
|
|
|
#define AN_TXENCAP_RFC1024 0x0000
|
|
#define AN_TXENCAP_80211 0x0002
|
|
|
|
/*
|
|
* Card capabilities (read only).
|
|
*/
|
|
struct an_ltv_caps {
|
|
u_int16_t an_len; /* 0x00 */
|
|
u_int16_t an_type; /* XXXX */
|
|
u_int8_t an_oui[3]; /* 0x02 */
|
|
u_int8_t an_rsvd0; /* 0x05 */
|
|
u_int16_t an_prodnum; /* 0x06 */
|
|
u_int8_t an_manufname[32]; /* 0x08 */
|
|
u_int8_t an_prodname[16]; /* 0x28 */
|
|
u_int8_t an_prodvers[8]; /* 0x38 */
|
|
u_int8_t an_oemaddr[6]; /* 0x40 */
|
|
u_int8_t an_aironetaddr[6]; /* 0x46 */
|
|
u_int16_t an_radiotype; /* 0x4C */
|
|
u_int16_t an_regdomain; /* 0x4E */
|
|
u_int8_t an_callid[6]; /* 0x50 */
|
|
u_int8_t an_rates[8]; /* 0x56 */
|
|
u_int8_t an_rx_diversity; /* 0x5E */
|
|
u_int8_t an_tx_diversity; /* 0x5F */
|
|
u_int16_t an_tx_powerlevels[8]; /* 0x60 */
|
|
u_int16_t an_hwrev; /* 0x70 */
|
|
u_int16_t an_hwcaps; /* 0x72 */
|
|
u_int16_t an_temprange; /* 0x74 */
|
|
u_int16_t an_fwrev; /* 0x76 */
|
|
u_int16_t an_fwsubrev; /* 0x78 */
|
|
u_int16_t an_ifacerev; /* 0x7A */
|
|
u_int16_t an_softcaps; /* 0x7C */
|
|
u_int16_t an_bootblockrev; /* 0x7E */
|
|
u_int16_t an_req_hw_support; /* 0x80 */
|
|
u_int16_t an_unknown[31]; /* 0x82 */
|
|
};
|
|
|
|
/*
|
|
* Access point (read only)
|
|
*/
|
|
struct an_ltv_apinfo {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
u_int16_t an_tim_addr;
|
|
u_int16_t an_airo_addr;
|
|
};
|
|
|
|
/*
|
|
* Radio info (read only).
|
|
*/
|
|
struct an_ltv_radioinfo {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
/* ??? */
|
|
};
|
|
|
|
/*
|
|
* RSSI map. If available in the card's firmware, this can be used to
|
|
* convert the 8-bit RSSI values from the card into dBm.
|
|
*/
|
|
struct an_ltv_rssi_map {
|
|
u_int16_t an_len;
|
|
u_int16_t an_type;
|
|
struct an_rssi_entry an_entries[256];
|
|
};
|
|
|
|
/*
|
|
* Status (read only). Note: the manual claims this RID is 108 bytes
|
|
* long (0x6A is the last datum, which is 2 bytes long) however when
|
|
* this RID is read from the NIC, it returns a length of 110. To be
|
|
* on the safe side, this structure is padded with an extra 16-bit
|
|
* word. (There is a misprint in the manual which says the macaddr
|
|
* field is 8 bytes long.)
|
|
*
|
|
* Also, the channel_set and current_channel fields appear to be
|
|
* reversed. Either that, or the hop_period field is unused.
|
|
*/
|
|
struct an_ltv_status {
|
|
u_int16_t an_len; /* 0x00 */
|
|
u_int16_t an_type; /* 0xXX */
|
|
u_int8_t an_macaddr[6]; /* 0x02 */
|
|
u_int16_t an_opmode; /* 0x08 */
|
|
u_int16_t an_errcode; /* 0x0A */
|
|
u_int16_t an_signal_quality; /* 0x0C */
|
|
u_int16_t an_ssidlen; /* 0x0E */
|
|
u_int8_t an_ssid[32]; /* 0x10 */
|
|
u_int8_t an_ap_name[16]; /* 0x30 */
|
|
u_int8_t an_cur_bssid[6]; /* 0x40 */
|
|
u_int8_t an_prev_bssid1[6]; /* 0x46 */
|
|
u_int8_t an_prev_bssid2[6]; /* 0x4C */
|
|
u_int8_t an_prev_bssid3[6]; /* 0x52 */
|
|
u_int16_t an_beacon_period; /* 0x58 */
|
|
u_int16_t an_dtim_period; /* 0x5A */
|
|
u_int16_t an_atim_duration; /* 0x5C */
|
|
u_int16_t an_hop_period; /* 0x5E */
|
|
u_int16_t an_cur_channel; /* 0x62 */
|
|
u_int16_t an_channel_set; /* 0x60 */
|
|
u_int16_t an_hops_to_backbone; /* 0x64 */
|
|
u_int16_t an_ap_total_load; /* 0x66 */
|
|
u_int16_t an_our_generated_load; /* 0x68 */
|
|
u_int16_t an_accumulated_arl; /* 0x6A */
|
|
u_int16_t an_cur_signal_quality; /* 0x6C */
|
|
u_int16_t an_current_tx_rate; /* 0x6E */
|
|
u_int16_t an_ap_device; /* 0x70 */
|
|
u_int16_t an_normalized_strength; /* 0x72 */
|
|
u_int16_t an_short_pre_in_use; /* 0x74 */
|
|
u_int8_t an_ap_ip_addr[4]; /* 0x76 */
|
|
u_int8_t an_noise_prev_sec_pc; /* 0x7A */
|
|
u_int8_t an_noise_prev_sec_db; /* 0x7B */
|
|
u_int8_t an_avg_noise_prev_min_pc; /* 0x7C */
|
|
u_int8_t an_avg_noise_prev_min_db; /* 0x7D */
|
|
u_int8_t an_max_noise_prev_min_pc; /* 0x7E */
|
|
u_int8_t an_max_noise_prev_min_db; /* 0x7F */
|
|
u_int16_t an_spare[18];
|
|
};
|
|
|
|
#define AN_STATUS_OPMODE_CONFIGURED 0x0001
|
|
#define AN_STATUS_OPMODE_MAC_ENABLED 0x0002
|
|
#define AN_STATUS_OPMODE_RX_ENABLED 0x0004
|
|
#define AN_STATUS_OPMODE_IN_SYNC 0x0010
|
|
#define AN_STATUS_OPMODE_ASSOCIATED 0x0020
|
|
#define AN_STATUS_OPMODE_LEAP 0x0040
|
|
#define AN_STATUS_OPMODE_ERROR 0x8000
|
|
|
|
/*
|
|
* WEP Key
|
|
*/
|
|
struct an_ltv_wepkey {
|
|
u_int16_t an_len; /* 0x00 */
|
|
u_int16_t an_type; /* 0xXX */
|
|
u_int16_t an_key_index; /* 0x02 */
|
|
u_int8_t an_mac_addr[6]; /* 0x04 */
|
|
u_int16_t an_key_len; /* 0x0A */
|
|
u_int8_t an_key[13]; /* 0x0C */
|
|
};
|
|
|
|
/*
|
|
* Receive frame structure.
|
|
*/
|
|
struct an_rxframe {
|
|
u_int32_t an_rx_time; /* 0x00 */
|
|
u_int16_t an_rx_status; /* 0x04 */
|
|
u_int16_t an_rx_payload_len; /* 0x06 */
|
|
u_int8_t an_rsvd0; /* 0x08 */
|
|
u_int8_t an_rx_signal_strength; /* 0x09 */
|
|
u_int8_t an_rx_rate; /* 0x0A */
|
|
u_int8_t an_rx_chan; /* 0x0B */
|
|
u_int8_t an_rx_assoc_cnt; /* 0x0C */
|
|
u_int8_t an_rsvd1[3]; /* 0x0D */
|
|
u_int8_t an_plcp_hdr[4]; /* 0x10 */
|
|
u_int16_t an_frame_ctl; /* 0x14 */
|
|
u_int16_t an_duration; /* 0x16 */
|
|
u_int8_t an_addr1[6]; /* 0x18 */
|
|
u_int8_t an_addr2[6]; /* 0x1E */
|
|
u_int8_t an_addr3[6]; /* 0x24 */
|
|
u_int16_t an_seq_ctl; /* 0x2A */
|
|
u_int8_t an_addr4[6]; /* 0x2C */
|
|
u_int8_t an_gaplen; /* 0x32 */
|
|
} __packed;
|
|
|
|
|
|
/* Do not modify this unless you are modifying LEAP itself */
|
|
#define LEAP_USERNAME_MAX 32
|
|
#define LEAP_PASSWORD_MAX 32
|
|
|
|
/*
|
|
* LEAP Username
|
|
*/
|
|
struct an_ltv_leap_username {
|
|
u_int16_t an_len; /* 0x00 */
|
|
u_int16_t an_type; /* 0xXX */
|
|
u_int16_t an_username_len; /* 0x02 */
|
|
u_int8_t an_username[LEAP_USERNAME_MAX]; /* 0x04 */
|
|
};
|
|
|
|
/*
|
|
* LEAP Password
|
|
*/
|
|
struct an_ltv_leap_password {
|
|
u_int16_t an_len; /* 0x00 */
|
|
u_int16_t an_type; /* 0xXX */
|
|
u_int16_t an_password_len; /* 0x02 */
|
|
u_int8_t an_password[LEAP_PASSWORD_MAX]; /* 0x04 */
|
|
};
|
|
|
|
/*
|
|
* These are all the LTV record types that we can read or write
|
|
* from the Aironet. Not all of them are temendously useful, but I
|
|
* list as many as I know about here for completeness.
|
|
*/
|
|
|
|
/*
|
|
* Configuration (read/write)
|
|
*/
|
|
#define AN_RID_GENCONFIG 0xFF10 /* General configuration info */
|
|
#define AN_RID_SSIDLIST 0xFF11 /* Valid SSID list */
|
|
#define AN_RID_APLIST 0xFF12 /* Valid AP list */
|
|
#define AN_RID_DRVNAME 0xFF13 /* ID name of this node for diag */
|
|
#define AN_RID_ENCAPPROTO 0xFF14 /* Payload encapsulation type */
|
|
#define AN_RID_WEP_TEMP 0xFF15 /* Temporary Key */
|
|
#define AN_RID_WEP_PERM 0xFF16 /* Perminant Key */
|
|
#define AN_RID_ACTUALCFG 0xFF20 /* Current configuration settings */
|
|
|
|
/*
|
|
* Reporting (read only)
|
|
*/
|
|
#define AN_RID_CAPABILITIES 0xFF00 /* PC 4500/4800 capabilities */
|
|
#define AN_RID_AP_INFO 0xFF01 /* Access point info */
|
|
#define AN_RID_RADIO_INFO 0xFF02 /* Radio info */
|
|
#define AN_RID_RSSI_MAP 0xFF04 /* RSSI <-> dBm table */
|
|
#define AN_RID_STATUS 0xFF50 /* Current status info */
|
|
#define AN_RID_BEACONS_HST 0xFF51
|
|
#define AN_RID_BUSY_HST 0xFF52
|
|
#define AN_RID_RETRIES_HST 0xFF53
|
|
|
|
/*
|
|
* Statistics
|
|
*/
|
|
#define AN_RID_16BITS_CUM 0xFF60 /* Cumulative 16-bit stats counters */
|
|
#define AN_RID_16BITS_DELTA 0xFF61 /* 16-bit stats (since last clear) */
|
|
#define AN_RID_16BITS_DELTACLR 0xFF62 /* 16-bit stats, clear on read */
|
|
#define AN_RID_32BITS_CUM 0xFF68 /* Cumulative 32-bit stats counters */
|
|
#define AN_RID_32BITS_DELTA 0xFF69 /* 32-bit stats (since last clear) */
|
|
#define AN_RID_32BITS_DELTACLR 0xFF6A /* 32-bit stats, clear on read */
|
|
|
|
/*
|
|
* LEAP
|
|
*/
|
|
|
|
#define AN_RID_LEAPUSERNAME 0xFF23 /* Username */
|
|
#define AN_RID_LEAPPASSWORD 0xFF24 /* Password */
|
|
|
|
/*
|
|
* OTHER Unknonwn for now
|
|
*/
|
|
|
|
#define AN_RID_MOD 0xFF17
|
|
#define AN_RID_OPTIONS 0xFF18
|
|
#define AN_RID_FACTORY_CONFIG 0xFF18
|
|
|
|
/*
|
|
* FreeBSD fake RID
|
|
*/
|
|
|
|
#define AN_RID_MONITOR_MODE 0x0001 /* Set monitor mode for driver */
|
|
#define AN_MONITOR 1
|
|
#define AN_MONITOR_ANY_BSS 2
|
|
#define AN_MONITOR_INCLUDE_BEACON 4
|
|
#define AN_MONITOR_AIRONET_HEADER 8
|
|
|
|
#define DLT_AIRONET_HEADER 120 /* Has been allocated at tcpdump.org */
|
|
|
|
/*
|
|
* from the Linux driver from Cisco ... no copyright header.
|
|
* Removed duplicated information that already existed in the FreeBSD driver
|
|
* provides emulation of the Cisco extensions to the Linux Aironet driver.
|
|
*/
|
|
|
|
/*
|
|
* Ioctl constants to be used in airo_ioctl.command
|
|
*/
|
|
|
|
#define AIROGCAP 0 /* Capability rid */
|
|
#define AIROGCFG 1 /* USED A LOT */
|
|
#define AIROGSLIST 2 /* System ID list */
|
|
#define AIROGVLIST 3 /* List of specified AP's */
|
|
#define AIROGDRVNAM 4 /* NOTUSED */
|
|
#define AIROGEHTENC 5 /* NOTUSED */
|
|
#define AIROGWEPKTMP 6
|
|
#define AIROGWEPKNV 7
|
|
#define AIROGSTAT 8
|
|
#define AIROGSTATSC32 9
|
|
#define AIROGSTATSD32 10
|
|
|
|
/*
|
|
* Leave gap of 40 commands after AIROGSTATSD32
|
|
*/
|
|
|
|
#define AIROPCAP AIROGSTATSD32 + 40
|
|
#define AIROPVLIST AIROPCAP + 1
|
|
#define AIROPSLIST AIROPVLIST + 1
|
|
#define AIROPCFG AIROPSLIST + 1
|
|
#define AIROPSIDS AIROPCFG + 1
|
|
#define AIROPAPLIST AIROPSIDS + 1
|
|
#define AIROPMACON AIROPAPLIST + 1 /* Enable mac */
|
|
#define AIROPMACOFF AIROPMACON + 1 /* Disable mac */
|
|
#define AIROPSTCLR AIROPMACOFF + 1
|
|
#define AIROPWEPKEY AIROPSTCLR + 1
|
|
#define AIROPWEPKEYNV AIROPWEPKEY + 1
|
|
#define AIROPLEAPPWD AIROPWEPKEYNV + 1
|
|
#define AIROPLEAPUSR AIROPLEAPPWD + 1
|
|
|
|
/*
|
|
* Another gap of 40 commands before flash codes
|
|
*/
|
|
|
|
#define AIROFLSHRST AIROPWEPKEYNV + 40
|
|
#define AIROFLSHGCHR AIROFLSHRST + 1
|
|
#define AIROFLSHSTFL AIROFLSHGCHR + 1
|
|
#define AIROFLSHPCHR AIROFLSHSTFL + 1
|
|
#define AIROFLPUTBUF AIROFLSHPCHR + 1
|
|
#define AIRORESTART AIROFLPUTBUF + 1
|
|
|
|
/*
|
|
* Struct to enable up to 65535 ioctl's
|
|
*/
|
|
|
|
#define AIROMAGIC 0xa55a
|
|
|
|
typedef struct aironet_ioctl {
|
|
unsigned short command; /* What to do */
|
|
unsigned short len; /* Len of data */
|
|
unsigned char *data; /* d-data */
|
|
} airo_ioctl;
|
|
|
|
#endif
|