d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bf100f266b
freebsd-nq/sys/mips/cavium/usb/octusb.c
Hans Petter Selasky 0324d54acb Inherit USB mode from RootHUB port where the USB device is connected. 
Only RootHUB ports can be dual mode. Disallow OTG ports on external HUBs.
This simplifies some checks in the USB controller drivers.

MFC after:	1 week
2012-10-01 05:42:43 +00:00

1948 lines
44 KiB
C
Raw Blame History

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 2010 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This file contains the driver for Octeon Executive Library USB
* Controller driver API.
*/
/* TODO: The root HUB port callback is not yet implemented. */
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#define USB_DEBUG_VAR octusbdebug
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_transfer.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_hub.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <contrib/octeon-sdk/cvmx.h>
#include <contrib/octeon-sdk/cvmx-usb.h>
#include <mips/cavium/usb/octusb.h>
#define OCTUSB_BUS2SC(bus) \
((struct octusb_softc *)(((uint8_t *)(bus)) - \
((uint8_t *)&(((struct octusb_softc *)0)->sc_bus))))
#ifdef USB_DEBUG
static int octusbdebug = 0;
static SYSCTL_NODE(_hw_usb, OID_AUTO, octusb, CTLFLAG_RW, 0, "OCTUSB");
SYSCTL_INT(_hw_usb_octusb, OID_AUTO, debug, CTLFLAG_RW,
&octusbdebug, 0, "OCTUSB debug level");
TUNABLE_INT("hw.usb.octusb.debug", &octusbdebug);
#endif
struct octusb_std_temp {
octusb_cmd_t *func;
struct octusb_td *td;
struct octusb_td *td_next;
struct usb_page_cache *pc;
uint32_t offset;
uint32_t len;
uint8_t short_pkt;
uint8_t setup_alt_next;
};
extern struct usb_bus_methods octusb_bus_methods;
extern struct usb_pipe_methods octusb_device_bulk_methods;
extern struct usb_pipe_methods octusb_device_ctrl_methods;
extern struct usb_pipe_methods octusb_device_intr_methods;
extern struct usb_pipe_methods octusb_device_isoc_methods;
static void octusb_standard_done(struct usb_xfer *);
static void octusb_device_done(struct usb_xfer *, usb_error_t);
static void octusb_timeout(void *);
static void octusb_do_poll(struct usb_bus *);
static cvmx_usb_speed_t
octusb_convert_speed(enum usb_dev_speed speed)
{
; /* indent fix */
switch (speed) {
case USB_SPEED_HIGH:
return (CVMX_USB_SPEED_HIGH);
case USB_SPEED_FULL:
return (CVMX_USB_SPEED_FULL);
default:
return (CVMX_USB_SPEED_LOW);
}
}
static cvmx_usb_transfer_t
octusb_convert_ep_type(uint8_t ep_type)
{
; /* indent fix */
switch (ep_type & UE_XFERTYPE) {
case UE_CONTROL:
return (CVMX_USB_TRANSFER_CONTROL);
case UE_INTERRUPT:
return (CVMX_USB_TRANSFER_INTERRUPT);
case UE_ISOCHRONOUS:
return (CVMX_USB_TRANSFER_ISOCHRONOUS);
case UE_BULK:
return (CVMX_USB_TRANSFER_BULK);
default:
return (0); /* should not happen */
}
}
static uint8_t
octusb_host_alloc_endpoint(struct octusb_td *td)
{
struct octusb_softc *sc;
int ep_handle;
if (td->qh->fixup_pending)
return (1); /* busy */
if (td->qh->ep_allocated)
return (0); /* success */
/* get softc */
sc = td->qh->sc;
ep_handle = cvmx_usb_open_pipe(
&sc->sc_port[td->qh->root_port_index].state,
0,
td->qh->dev_addr,
td->qh->ep_num & UE_ADDR,
octusb_convert_speed(td->qh->dev_speed),
td->qh->max_packet_size,
octusb_convert_ep_type(td->qh->ep_type),
(td->qh->ep_num & UE_DIR_IN) ? CVMX_USB_DIRECTION_IN :
CVMX_USB_DIRECTION_OUT,
td->qh->ep_interval,
(td->qh->dev_speed == USB_SPEED_HIGH) ? td->qh->ep_mult : 0,
td->qh->hs_hub_addr,
td->qh->hs_hub_port);
if (ep_handle < 0) {
DPRINTFN(1, "cvmx_usb_open_pipe failed: %d\n", ep_handle);
return (1); /* busy */
}
cvmx_usb_set_toggle(
&sc->sc_port[td->qh->root_port_index].state,
ep_handle, td->qh->ep_toggle_next);
td->qh->fixup_handle = -1;
td->qh->fixup_complete = 0;
td->qh->fixup_len = 0;
td->qh->fixup_off = 0;
td->qh->fixup_pending = 0;
td->qh->fixup_actlen = 0;
td->qh->ep_handle = ep_handle;
td->qh->ep_allocated = 1;
return (0); /* success */
}
static void
octusb_host_free_endpoint(struct octusb_td *td)
{
struct octusb_softc *sc;
if (td->qh->ep_allocated == 0)
return;
/* get softc */
sc = td->qh->sc;
if (td->qh->fixup_handle >= 0) {
/* cancel, if any */
cvmx_usb_cancel(&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, td->qh->fixup_handle);
}
cvmx_usb_close_pipe(&sc->sc_port[td->qh->root_port_index].state, td->qh->ep_handle);
td->qh->ep_allocated = 0;
}
static void
octusb_complete_cb(cvmx_usb_state_t *state,
cvmx_usb_callback_t reason,
cvmx_usb_complete_t status,
int pipe_handle, int submit_handle,
int bytes_transferred, void *user_data)
{
struct octusb_td *td;
if (reason != CVMX_USB_CALLBACK_TRANSFER_COMPLETE)
return;
td = user_data;
td->qh->fixup_complete = 1;
td->qh->fixup_pending = 0;
td->qh->fixup_actlen = bytes_transferred;
td->qh->fixup_handle = -1;
switch (status) {
case CVMX_USB_COMPLETE_SUCCESS:
case CVMX_USB_COMPLETE_SHORT:
td->error_any = 0;
td->error_stall = 0;
break;
case CVMX_USB_COMPLETE_STALL:
td->error_stall = 1;
td->error_any = 1;
break;
default:
td->error_any = 1;
break;
}
}
static uint8_t
octusb_host_control_header_tx(struct octusb_td *td)
{
int status;
/* allocate endpoint and check pending */
if (octusb_host_alloc_endpoint(td))
return (1); /* busy */
/* check error */
if (td->error_any)
return (0); /* done */
if (td->qh->fixup_complete != 0) {
/* clear complete flag */
td->qh->fixup_complete = 0;
/* flush data */
usb_pc_cpu_invalidate(td->qh->fixup_pc);
return (0); /* done */
}
/* verify length */
if (td->remainder != 8) {
td->error_any = 1;
return (0); /* done */
}
usbd_copy_out(td->pc, td->offset, td->qh->fixup_buf, 8);
/* update offset and remainder */
td->offset += 8;
td->remainder -= 8;
/* setup data length and offset */
td->qh->fixup_len = UGETW(td->qh->fixup_buf + 6);
td->qh->fixup_off = 0;
if (td->qh->fixup_len > (OCTUSB_MAX_FIXUP - 8)) {
td->error_any = 1;
return (0); /* done */
}
/* do control IN request */
if (td->qh->fixup_buf[0] & UE_DIR_IN) {
struct octusb_softc *sc;
/* get softc */
sc = td->qh->sc;
/* flush data */
usb_pc_cpu_flush(td->qh->fixup_pc);
status = cvmx_usb_submit_control(
&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, td->qh->fixup_phys,
td->qh->fixup_phys + 8, td->qh->fixup_len,
&octusb_complete_cb, td);
/* check status */
if (status < 0) {
td->error_any = 1;
return (0); /* done */
}
td->qh->fixup_handle = status;
td->qh->fixup_pending = 1;
td->qh->fixup_complete = 0;
return (1); /* busy */
}
return (0); /* done */
}
static uint8_t
octusb_host_control_data_tx(struct octusb_td *td)
{
uint32_t rem;
/* allocate endpoint and check pending */
if (octusb_host_alloc_endpoint(td))
return (1); /* busy */
/* check error */
if (td->error_any)
return (0); /* done */
rem = td->qh->fixup_len - td->qh->fixup_off;
if (td->remainder > rem) {
td->error_any = 1;
DPRINTFN(1, "Excess setup transmit data\n");
return (0); /* done */
}
usbd_copy_out(td->pc, td->offset, td->qh->fixup_buf +
td->qh->fixup_off + 8, td->remainder);
td->offset += td->remainder;
td->qh->fixup_off += td->remainder;
td->remainder = 0;
return (0); /* done */
}
static uint8_t
octusb_host_control_data_rx(struct octusb_td *td)
{
uint32_t rem;
/* allocate endpoint and check pending */
if (octusb_host_alloc_endpoint(td))
return (1); /* busy */
/* check error */
if (td->error_any)
return (0); /* done */
/* copy data from buffer */
rem = td->qh->fixup_actlen - td->qh->fixup_off;
if (rem > td->remainder)
rem = td->remainder;
usbd_copy_in(td->pc, td->offset, td->qh->fixup_buf +
td->qh->fixup_off + 8, rem);
td->offset += rem;
td->remainder -= rem;
td->qh->fixup_off += rem;
return (0); /* done */
}
static uint8_t
octusb_host_control_status_tx(struct octusb_td *td)
{
int status;
/* allocate endpoint and check pending */
if (octusb_host_alloc_endpoint(td))
return (1); /* busy */
/* check error */
if (td->error_any)
return (0); /* done */
if (td->qh->fixup_complete != 0) {
/* clear complete flag */
td->qh->fixup_complete = 0;
/* done */
return (0);
}
/* do control IN request */
if (!(td->qh->fixup_buf[0] & UE_DIR_IN)) {
struct octusb_softc *sc;
/* get softc */
sc = td->qh->sc;
/* flush data */
usb_pc_cpu_flush(td->qh->fixup_pc);
/* start USB transfer */
status = cvmx_usb_submit_control(
&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, td->qh->fixup_phys,
td->qh->fixup_phys + 8, td->qh->fixup_len,
&octusb_complete_cb, td);
/* check status */
if (status < 0) {
td->error_any = 1;
return (0); /* done */
}
td->qh->fixup_handle = status;
td->qh->fixup_pending = 1;
td->qh->fixup_complete = 0;
return (1); /* busy */
}
return (0); /* done */
}
static uint8_t
octusb_non_control_data_tx(struct octusb_td *td)
{
struct octusb_softc *sc;
uint32_t rem;
int status;
/* allocate endpoint and check pending */
if (octusb_host_alloc_endpoint(td))
return (1); /* busy */
/* check error */
if (td->error_any)
return (0); /* done */
if ((td->qh->fixup_complete != 0) &&
((td->qh->ep_type & UE_XFERTYPE) == UE_ISOCHRONOUS)) {
td->qh->fixup_complete = 0;
return (0); /* done */
}
/* check complete */
if (td->remainder == 0) {
if (td->short_pkt)
return (0); /* complete */
/* else need to send a zero length packet */
rem = 0;
td->short_pkt = 1;
} else {
/* get maximum length */
rem = OCTUSB_MAX_FIXUP % td->qh->max_frame_size;
rem = OCTUSB_MAX_FIXUP - rem;
if (rem == 0) {
/* should not happen */
DPRINTFN(1, "Fixup buffer is too small\n");
td->error_any = 1;
return (0); /* done */
}
/* get minimum length */
if (rem > td->remainder) {
rem = td->remainder;
if ((rem == 0) || (rem % td->qh->max_frame_size))
td->short_pkt = 1;
}
/* copy data into fixup buffer */
usbd_copy_out(td->pc, td->offset, td->qh->fixup_buf, rem);
/* flush data */
usb_pc_cpu_flush(td->qh->fixup_pc);
/* pre-increment TX buffer offset */
td->offset += rem;
td->remainder -= rem;
}
/* get softc */
sc = td->qh->sc;
switch (td->qh->ep_type & UE_XFERTYPE) {
case UE_ISOCHRONOUS:
td->qh->iso_pkt.offset = 0;
td->qh->iso_pkt.length = rem;
td->qh->iso_pkt.status = 0;
/* start USB transfer */
status = cvmx_usb_submit_isochronous(&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, 1, CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT |
CVMX_USB_ISOCHRONOUS_FLAGS_ASAP, 1, &td->qh->iso_pkt,
td->qh->fixup_phys, rem, &octusb_complete_cb, td);
break;
case UE_BULK:
/* start USB transfer */
status = cvmx_usb_submit_bulk(&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, td->qh->fixup_phys, rem, &octusb_complete_cb, td);
break;
case UE_INTERRUPT:
/* start USB transfer (interrupt or interrupt) */
status = cvmx_usb_submit_interrupt(&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, td->qh->fixup_phys, rem, &octusb_complete_cb, td);
break;
default:
status = -1;
break;
}
/* check status */
if (status < 0) {
td->error_any = 1;
return (0); /* done */
}
td->qh->fixup_handle = status;
td->qh->fixup_len = rem;
td->qh->fixup_pending = 1;
td->qh->fixup_complete = 0;
return (1); /* busy */
}
static uint8_t
octusb_non_control_data_rx(struct octusb_td *td)
{
struct octusb_softc *sc;
uint32_t rem;
int status;
uint8_t got_short;
/* allocate endpoint and check pending */
if (octusb_host_alloc_endpoint(td))
return (1); /* busy */
/* check error */
if (td->error_any)
return (0); /* done */
got_short = 0;
if (td->qh->fixup_complete != 0) {
/* invalidate data */
usb_pc_cpu_invalidate(td->qh->fixup_pc);
rem = td->qh->fixup_actlen;
/* verify transfer length */
if (rem != td->qh->fixup_len) {
if (rem < td->qh->fixup_len) {
/* we have a short packet */
td->short_pkt = 1;
got_short = 1;
} else {
/* invalid USB packet */
td->error_any = 1;
return (0); /* we are complete */
}
}
/* copy data into fixup buffer */
usbd_copy_in(td->pc, td->offset, td->qh->fixup_buf, rem);
/* post-increment RX buffer offset */
td->offset += rem;
td->remainder -= rem;
td->qh->fixup_complete = 0;
if ((td->qh->ep_type & UE_XFERTYPE) == UE_ISOCHRONOUS)
return (0); /* done */
}
/* check if we are complete */
if ((td->remainder == 0) || got_short) {
if (td->short_pkt) {
/* we are complete */
return (0);
}
/* else need to receive a zero length packet */
rem = 0;
td->short_pkt = 1;
} else {
/* get maximum length */
rem = OCTUSB_MAX_FIXUP % td->qh->max_frame_size;
rem = OCTUSB_MAX_FIXUP - rem;
if (rem == 0) {
/* should not happen */
DPRINTFN(1, "Fixup buffer is too small\n");
td->error_any = 1;
return (0); /* done */
}
/* get minimum length */
if (rem > td->remainder)
rem = td->remainder;
}
/* invalidate data */
usb_pc_cpu_invalidate(td->qh->fixup_pc);
/* get softc */
sc = td->qh->sc;
switch (td->qh->ep_type & UE_XFERTYPE) {
case UE_ISOCHRONOUS:
td->qh->iso_pkt.offset = 0;
td->qh->iso_pkt.length = rem;
td->qh->iso_pkt.status = 0;
/* start USB transfer */
status = cvmx_usb_submit_isochronous(&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, 1, CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT |
CVMX_USB_ISOCHRONOUS_FLAGS_ASAP, 1, &td->qh->iso_pkt,
td->qh->fixup_phys, rem, &octusb_complete_cb, td);
break;
case UE_BULK:
/* start USB transfer */
status = cvmx_usb_submit_bulk(&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, td->qh->fixup_phys, rem, &octusb_complete_cb, td);
break;
case UE_INTERRUPT:
/* start USB transfer */
status = cvmx_usb_submit_interrupt(&sc->sc_port[td->qh->root_port_index].state,
td->qh->ep_handle, td->qh->fixup_phys, rem, &octusb_complete_cb, td);
break;
default:
status = -1;
break;
}
/* check status */
if (status < 0) {
td->error_any = 1;
return (0); /* done */
}
td->qh->fixup_handle = status;
td->qh->fixup_len = rem;
td->qh->fixup_pending = 1;
td->qh->fixup_complete = 0;
return (1); /* busy */
}
static uint8_t
octusb_xfer_do_fifo(struct usb_xfer *xfer)
{
struct octusb_td *td;
DPRINTFN(8, "\n");
td = xfer->td_transfer_cache;
while (1) {
if ((td->func) (td)) {
/* operation in progress */
break;
}
if (((void *)td) == xfer->td_transfer_last) {
goto done;
}
if (td->error_any) {
goto done;
} else if (td->remainder > 0) {
/*
* We had a short transfer. If there is no
* alternate next, stop processing !
*/
if (td->alt_next == 0)
goto done;
}
/*
* Fetch the next transfer descriptor and transfer
* some flags to the next transfer descriptor
*/
td = td->obj_next;
xfer->td_transfer_cache = td;
}
return (1); /* not complete */
done:
/* compute all actual lengths */
octusb_standard_done(xfer);
return (0); /* complete */
}
static usb_error_t
octusb_standard_done_sub(struct usb_xfer *xfer)
{
struct octusb_td *td;
uint32_t len;
usb_error_t error;
DPRINTFN(8, "\n");
td = xfer->td_transfer_cache;
do {
len = td->remainder;
if (xfer->aframes != xfer->nframes) {
/*
* Verify the length and subtract
* the remainder from "frlengths[]":
*/
if (len > xfer->frlengths[xfer->aframes]) {
td->error_any = 1;
} else {
xfer->frlengths[xfer->aframes] -= len;
}
}
/* Check for transfer error */
if (td->error_any) {
/* the transfer is finished */
error = td->error_stall ? USB_ERR_STALLED : USB_ERR_IOERROR;
td = NULL;
break;
}
/* Check for short transfer */
if (len > 0) {
if (xfer->flags_int.short_frames_ok) {
/* follow alt next */
if (td->alt_next) {
td = td->obj_next;
} else {
td = NULL;
}
} else {
/* the transfer is finished */
td = NULL;
}
error = 0;
break;
}
td = td->obj_next;
/* this USB frame is complete */
error = 0;
break;
} while (0);
/* update transfer cache */
xfer->td_transfer_cache = td;
return (error);
}
static void
octusb_standard_done(struct usb_xfer *xfer)
{
struct octusb_softc *sc;
struct octusb_qh *qh;
usb_error_t error = 0;
DPRINTFN(12, "xfer=%p endpoint=%p transfer done\n",
xfer, xfer->endpoint);
/* reset scanner */
xfer->td_transfer_cache = xfer->td_transfer_first;
if (xfer->flags_int.control_xfr) {
if (xfer->flags_int.control_hdr)
error = octusb_standard_done_sub(xfer);
xfer->aframes = 1;
if (xfer->td_transfer_cache == NULL)
goto done;
}
while (xfer->aframes != xfer->nframes) {
error = octusb_standard_done_sub(xfer);
xfer->aframes++;
if (xfer->td_transfer_cache == NULL)
goto done;
}
if (xfer->flags_int.control_xfr &&
!xfer->flags_int.control_act)
error = octusb_standard_done_sub(xfer);
done:
/* update data toggle */
qh = xfer->qh_start[0];
sc = qh->sc;
xfer->endpoint->toggle_next =
cvmx_usb_get_toggle(
&sc->sc_port[qh->root_port_index].state,
qh->ep_handle) ? 1 : 0;
octusb_device_done(xfer, error);
}
static void
octusb_interrupt_poll(struct octusb_softc *sc)
{
struct usb_xfer *xfer;
uint8_t x;
/* poll all ports */
for (x = 0; x != sc->sc_noport; x++)
cvmx_usb_poll(&sc->sc_port[x].state);
repeat:
TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
if (!octusb_xfer_do_fifo(xfer)) {
/* queue has been modified */
goto repeat;
}
}
}
static void
octusb_start_standard_chain(struct usb_xfer *xfer)
{
DPRINTFN(8, "\n");
/* poll one time */
if (octusb_xfer_do_fifo(xfer)) {
/* put transfer on interrupt queue */
usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer);
/* start timeout, if any */
if (xfer->timeout != 0) {
usbd_transfer_timeout_ms(xfer,
&octusb_timeout, xfer->timeout);
}
}
}
void
octusb_iterate_hw_softc(struct usb_bus *bus, usb_bus_mem_sub_cb_t *cb)
{
}
usb_error_t
octusb_init(struct octusb_softc *sc)
{
cvmx_usb_initialize_flags_t flags;
int status;
uint8_t x;
/* flush all cache into memory */
usb_bus_mem_flush_all(&sc->sc_bus, &octusb_iterate_hw_softc);
/* set up the bus struct */
sc->sc_bus.methods = &octusb_bus_methods;
/* get number of ports */
sc->sc_noport = cvmx_usb_get_num_ports();
/* check number of ports */
if (sc->sc_noport > OCTUSB_MAX_PORTS)
sc->sc_noport = OCTUSB_MAX_PORTS;
/* set USB revision */
sc->sc_bus.usbrev = USB_REV_2_0;
/* flags for port initialization */
flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO;
#ifdef USB_DEBUG
if (octusbdebug > 100)
flags |= CVMX_USB_INITIALIZE_FLAGS_DEBUG_ALL;
#endif
USB_BUS_LOCK(&sc->sc_bus);
/* setup all ports */
for (x = 0; x != sc->sc_noport; x++) {
status = cvmx_usb_initialize(&sc->sc_port[x].state, x, flags);
if (status < 0)
sc->sc_port[x].disabled = 1;
}
USB_BUS_UNLOCK(&sc->sc_bus);
/* catch lost interrupts */
octusb_do_poll(&sc->sc_bus);
return (0);
}
usb_error_t
octusb_uninit(struct octusb_softc *sc)
{
uint8_t x;
USB_BUS_LOCK(&sc->sc_bus);
for (x = 0; x != sc->sc_noport; x++) {
if (sc->sc_port[x].disabled == 0)
cvmx_usb_shutdown(&sc->sc_port[x].state);
}
USB_BUS_UNLOCK(&sc->sc_bus);
return (0);
}
static void
octusb_suspend(struct octusb_softc *sc)
{
/* TODO */
}
static void
octusb_resume(struct octusb_softc *sc)
{
/* TODO */
}
/*------------------------------------------------------------------------*
* octusb_interrupt - OCTUSB interrupt handler
*------------------------------------------------------------------------*/
void
octusb_interrupt(struct octusb_softc *sc)
{
USB_BUS_LOCK(&sc->sc_bus);
DPRINTFN(16, "real interrupt\n");
/* poll all the USB transfers */
octusb_interrupt_poll(sc);
USB_BUS_UNLOCK(&sc->sc_bus);
}
/*------------------------------------------------------------------------*
* octusb_timeout - OCTUSB transfer timeout handler
*------------------------------------------------------------------------*/
static void
octusb_timeout(void *arg)
{
struct usb_xfer *xfer = arg;
DPRINTF("xfer=%p\n", xfer);
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
/* transfer is transferred */
octusb_device_done(xfer, USB_ERR_TIMEOUT);
}
/*------------------------------------------------------------------------*
* octusb_do_poll - OCTUSB poll transfers
*------------------------------------------------------------------------*/
static void
octusb_do_poll(struct usb_bus *bus)
{
struct octusb_softc *sc = OCTUSB_BUS2SC(bus);
USB_BUS_LOCK(&sc->sc_bus);
octusb_interrupt_poll(sc);
USB_BUS_UNLOCK(&sc->sc_bus);
}
static void
octusb_setup_standard_chain_sub(struct octusb_std_temp *temp)
{
struct octusb_td *td;
/* get current Transfer Descriptor */
td = temp->td_next;
temp->td = td;
/* prepare for next TD */
temp->td_next = td->obj_next;
/* fill out the Transfer Descriptor */
td->func = temp->func;
td->pc = temp->pc;
td->offset = temp->offset;
td->remainder = temp->len;
td->error_any = 0;
td->error_stall = 0;
td->short_pkt = temp->short_pkt;
td->alt_next = temp->setup_alt_next;
}
static void
octusb_setup_standard_chain(struct usb_xfer *xfer)
{
struct octusb_std_temp temp;
struct octusb_td *td;
uint32_t x;
DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
xfer->address, UE_GET_ADDR(xfer->endpointno),
xfer->sumlen, usbd_get_speed(xfer->xroot->udev));
/* setup starting point */
td = xfer->td_start[0];
xfer->td_transfer_first = td;
xfer->td_transfer_cache = td;
temp.td = NULL;
temp.td_next = td;
temp.setup_alt_next = xfer->flags_int.short_frames_ok;
temp.offset = 0;
/* check if we should prepend a setup message */
if (xfer->flags_int.control_xfr) {
if (xfer->flags_int.control_hdr) {
temp.func = &octusb_host_control_header_tx;
temp.len = xfer->frlengths[0];
temp.pc = xfer->frbuffers + 0;
temp.short_pkt = temp.len ? 1 : 0;
/* check for last frame */
if (xfer->nframes == 1) {
/*
* no STATUS stage yet, SETUP is
* last
*/
if (xfer->flags_int.control_act)
temp.setup_alt_next = 0;
}
octusb_setup_standard_chain_sub(&temp);
}
x = 1;
} else {
x = 0;
}
if (x != xfer->nframes) {
if (xfer->endpointno & UE_DIR_IN) {
if (xfer->flags_int.control_xfr)
temp.func = &octusb_host_control_data_rx;
else
temp.func = &octusb_non_control_data_rx;
} else {
if (xfer->flags_int.control_xfr)
temp.func = &octusb_host_control_data_tx;
else
temp.func = &octusb_non_control_data_tx;
}
/* setup "pc" pointer */
temp.pc = xfer->frbuffers + x;
}
while (x != xfer->nframes) {
/* DATA0 or DATA1 message */
temp.len = xfer->frlengths[x];
x++;
if (x == xfer->nframes) {
if (xfer->flags_int.control_xfr) {
/* no STATUS stage yet, DATA is last */
if (xfer->flags_int.control_act)
temp.setup_alt_next = 0;
} else {
temp.setup_alt_next = 0;
}
}
if (temp.len == 0) {
/* make sure that we send an USB packet */
temp.short_pkt = 0;
} else {
/* regular data transfer */
temp.short_pkt = (xfer->flags.force_short_xfer) ? 0 : 1;
}
octusb_setup_standard_chain_sub(&temp);
if (xfer->flags_int.isochronous_xfr) {
/* get next data offset */
temp.offset += temp.len;
} else {
/* get next Page Cache pointer */
temp.pc = xfer->frbuffers + x;
}
}
/* check if we should append a status stage */
if (xfer->flags_int.control_xfr &&
!xfer->flags_int.control_act) {
temp.func = &octusb_host_control_status_tx;
temp.len = 0;
temp.pc = NULL;
temp.short_pkt = 0;
temp.setup_alt_next = 0;
octusb_setup_standard_chain_sub(&temp);
}
/* must have at least one frame! */
td = temp.td;
xfer->td_transfer_last = td;
/* properly setup QH */
td->qh->ep_allocated = 0;
td->qh->ep_toggle_next = xfer->endpoint->toggle_next ? 1 : 0;
}
/*------------------------------------------------------------------------*
* octusb_device_done - OCTUSB transfers done code
*
* NOTE: This function can be called more than one time in a row.
*------------------------------------------------------------------------*/
static void
octusb_device_done(struct usb_xfer *xfer, usb_error_t error)
{
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n",
xfer, xfer->endpoint, error);
/*
* 1) Free any endpoints.
* 2) Control transfers can be split and we should not re-open
* the data pipe between transactions unless there is an error.
*/
if ((xfer->flags_int.control_act == 0) || (error != 0)) {
struct octusb_td *td;
td = xfer->td_start[0];
octusb_host_free_endpoint(td);
}
/* dequeue transfer and start next transfer */
usbd_transfer_done(xfer, error);
}
/*------------------------------------------------------------------------*
* octusb bulk support
*------------------------------------------------------------------------*/
static void
octusb_device_bulk_open(struct usb_xfer *xfer)
{
return;
}
static void
octusb_device_bulk_close(struct usb_xfer *xfer)
{
octusb_device_done(xfer, USB_ERR_CANCELLED);
}
static void
octusb_device_bulk_enter(struct usb_xfer *xfer)
{
return;
}
static void
octusb_device_bulk_start(struct usb_xfer *xfer)
{
/* setup TDs */
octusb_setup_standard_chain(xfer);
octusb_start_standard_chain(xfer);
}
struct usb_pipe_methods octusb_device_bulk_methods =
{
.open = octusb_device_bulk_open,
.close = octusb_device_bulk_close,
.enter = octusb_device_bulk_enter,
.start = octusb_device_bulk_start,
};
/*------------------------------------------------------------------------*
* octusb control support
*------------------------------------------------------------------------*/
static void
octusb_device_ctrl_open(struct usb_xfer *xfer)
{
return;
}
static void
octusb_device_ctrl_close(struct usb_xfer *xfer)
{
octusb_device_done(xfer, USB_ERR_CANCELLED);
}
static void
octusb_device_ctrl_enter(struct usb_xfer *xfer)
{
return;
}
static void
octusb_device_ctrl_start(struct usb_xfer *xfer)
{
/* setup TDs */
octusb_setup_standard_chain(xfer);
octusb_start_standard_chain(xfer);
}
struct usb_pipe_methods octusb_device_ctrl_methods =
{
.open = octusb_device_ctrl_open,
.close = octusb_device_ctrl_close,
.enter = octusb_device_ctrl_enter,
.start = octusb_device_ctrl_start,
};
/*------------------------------------------------------------------------*
* octusb interrupt support
*------------------------------------------------------------------------*/
static void
octusb_device_intr_open(struct usb_xfer *xfer)
{
return;
}
static void
octusb_device_intr_close(struct usb_xfer *xfer)
{
octusb_device_done(xfer, USB_ERR_CANCELLED);
}
static void
octusb_device_intr_enter(struct usb_xfer *xfer)
{
return;
}
static void
octusb_device_intr_start(struct usb_xfer *xfer)
{
/* setup TDs */
octusb_setup_standard_chain(xfer);
octusb_start_standard_chain(xfer);
}
struct usb_pipe_methods octusb_device_intr_methods =
{
.open = octusb_device_intr_open,
.close = octusb_device_intr_close,
.enter = octusb_device_intr_enter,
.start = octusb_device_intr_start,
};
/*------------------------------------------------------------------------*
* octusb isochronous support
*------------------------------------------------------------------------*/
static void
octusb_device_isoc_open(struct usb_xfer *xfer)
{
return;
}
static void
octusb_device_isoc_close(struct usb_xfer *xfer)
{
octusb_device_done(xfer, USB_ERR_CANCELLED);
}
static void
octusb_device_isoc_enter(struct usb_xfer *xfer)
{
struct octusb_softc *sc = OCTUSB_BUS2SC(xfer->xroot->bus);
uint32_t temp;
uint32_t frame_count;
uint32_t fs_frames;
DPRINTFN(5, "xfer=%p next=%d nframes=%d\n",
xfer, xfer->endpoint->isoc_next, xfer->nframes);
/* get the current frame index */
frame_count = cvmx_usb_get_frame_number(
&sc->sc_port[xfer->xroot->udev->port_index].state);
/*
* check if the frame index is within the window where the frames
* will be inserted
*/
temp = (frame_count - xfer->endpoint->isoc_next) & 0x7FF;
if (usbd_get_speed(xfer->xroot->udev) == USB_SPEED_HIGH) {
fs_frames = (xfer->nframes + 7) / 8;
} else {
fs_frames = xfer->nframes;
}
if ((xfer->endpoint->is_synced == 0) || (temp < fs_frames)) {
/*
* If there is data underflow or the pipe queue is
* empty we schedule the transfer a few frames ahead
* of the current frame position. Else two isochronous
* transfers might overlap.
*/
xfer->endpoint->isoc_next = (frame_count + 3) & 0x7FF;
xfer->endpoint->is_synced = 1;
DPRINTFN(2, "start next=%d\n", xfer->endpoint->isoc_next);
}
/*
* compute how many milliseconds the insertion is ahead of the
* current frame position:
*/
temp = (xfer->endpoint->isoc_next - frame_count) & 0x7FF;
/*
* pre-compute when the isochronous transfer will be finished:
*/
xfer->isoc_time_complete =
usb_isoc_time_expand(&sc->sc_bus, frame_count) + temp +
fs_frames;
/* compute frame number for next insertion */
xfer->endpoint->isoc_next += fs_frames;
}
static void
octusb_device_isoc_start(struct usb_xfer *xfer)
{
/* setup TDs */
octusb_setup_standard_chain(xfer);
octusb_start_standard_chain(xfer);
}
struct usb_pipe_methods octusb_device_isoc_methods =
{
.open = octusb_device_isoc_open,
.close = octusb_device_isoc_close,
.enter = octusb_device_isoc_enter,
.start = octusb_device_isoc_start,
};
/*------------------------------------------------------------------------*
* OCTUSB root HUB support
*------------------------------------------------------------------------*
* Simulate a hardware HUB by handling all the necessary requests.
*------------------------------------------------------------------------*/
static const
struct usb_device_descriptor octusb_devd = {
.bLength = sizeof(octusb_devd),
.bDescriptorType = UDESC_DEVICE,
.bcdUSB = {0x00, 0x02},
.bDeviceClass = UDCLASS_HUB,
.bDeviceSubClass = UDSUBCLASS_HUB,
.bDeviceProtocol = UDPROTO_FSHUB,
.bMaxPacketSize = 64,
.idVendor = {0},
.idProduct = {0},
.bcdDevice = {0x00, 0x01},
.iManufacturer = 1,
.iProduct = 2,
.iSerialNumber = 0,
.bNumConfigurations = 1,
};
static const
struct usb_device_qualifier octusb_odevd = {
.bLength = sizeof(octusb_odevd),
.bDescriptorType = UDESC_DEVICE_QUALIFIER,
.bcdUSB = {0x00, 0x02},
.bDeviceClass = UDCLASS_HUB,
.bDeviceSubClass = UDSUBCLASS_HUB,
.bDeviceProtocol = UDPROTO_FSHUB,
.bMaxPacketSize0 = 0,
.bNumConfigurations = 0,
.bReserved = 0,
};
static const
struct octusb_config_desc octusb_confd = {
.confd = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = UDESC_CONFIG,
.wTotalLength[0] = sizeof(octusb_confd),
.bNumInterface = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = UC_SELF_POWERED,
.bMaxPower = 0 /* max power */
},
.ifcd = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = UDESC_INTERFACE,
.bNumEndpoints = 1,
.bInterfaceClass = UICLASS_HUB,
.bInterfaceSubClass = UISUBCLASS_HUB,
.bInterfaceProtocol = UIPROTO_FSHUB,
},
.endpd = {
.bLength = sizeof(struct usb_endpoint_descriptor),
.bDescriptorType = UDESC_ENDPOINT,
.bEndpointAddress = UE_DIR_IN | OCTUSB_INTR_ENDPT,
.bmAttributes = UE_INTERRUPT,
.wMaxPacketSize[0] = 8, /* max packet (63 ports) */
.bInterval = 255,
},
};
static const
struct usb_hub_descriptor_min octusb_hubd =
{
.bDescLength = sizeof(octusb_hubd),
.bDescriptorType = UDESC_HUB,
.bNbrPorts = 2,
.wHubCharacteristics = {UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL, 0},
.bPwrOn2PwrGood = 50,
.bHubContrCurrent = 0,
.DeviceRemovable = {0x00}, /* all ports are removable */
};
static usb_error_t
octusb_roothub_exec(struct usb_device *udev,
struct usb_device_request *req, const void **pptr, uint16_t *plength)
{
struct octusb_softc *sc = OCTUSB_BUS2SC(udev->bus);
const void *ptr;
const char *str_ptr;
uint16_t value;
uint16_t index;
uint16_t status;
uint16_t change;
uint16_t len;
usb_error_t err;
cvmx_usb_port_status_t usb_port_status;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
/* XXX disable power save mode, hence it is not supported */
udev->power_mode = USB_POWER_MODE_ON;
/* buffer reset */
ptr = (const void *)&sc->sc_hub_desc.temp;
len = 0;
err = 0;
value = UGETW(req->wValue);
index = UGETW(req->wIndex);
DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x "
"wValue=0x%04x wIndex=0x%04x\n",
req->bmRequestType, req->bRequest,
UGETW(req->wLength), value, index);
#define C(x,y) ((x) | ((y) << 8))
switch (C(req->bRequest, req->bmRequestType)) {
case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE):
case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE):
case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT):
break;
case C(UR_GET_CONFIG, UT_READ_DEVICE):
len = 1;
sc->sc_hub_desc.temp[0] = sc->sc_conf;
break;
case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
switch (value >> 8) {
case UDESC_DEVICE:
if ((value & 0xff) != 0) {
err = USB_ERR_IOERROR;
goto done;
}
len = sizeof(octusb_devd);
ptr = (const void *)&octusb_devd;
break;
case UDESC_DEVICE_QUALIFIER:
if ((value & 0xff) != 0) {
err = USB_ERR_IOERROR;
goto done;
}
len = sizeof(octusb_odevd);
ptr = (const void *)&octusb_odevd;
break;
case UDESC_CONFIG:
if ((value & 0xff) != 0) {
err = USB_ERR_IOERROR;
goto done;
}
len = sizeof(octusb_confd);
ptr = (const void *)&octusb_confd;
break;
case UDESC_STRING:
switch (value & 0xff) {
case 0: /* Language table */
str_ptr = "\001";
break;
case 1: /* Vendor */
str_ptr = "Cavium Networks";
break;
case 2: /* Product */
str_ptr = "OCTUSB Root HUB";
break;
default:
str_ptr = "";
break;
}
len = usb_make_str_desc(sc->sc_hub_desc.temp,
sizeof(sc->sc_hub_desc.temp), str_ptr);
break;
default:
err = USB_ERR_IOERROR;
goto done;
}
break;
case C(UR_GET_INTERFACE, UT_READ_INTERFACE):
len = 1;
sc->sc_hub_desc.temp[0] = 0;
break;
case C(UR_GET_STATUS, UT_READ_DEVICE):
len = 2;
USETW(sc->sc_hub_desc.stat.wStatus, UDS_SELF_POWERED);
break;
case C(UR_GET_STATUS, UT_READ_INTERFACE):
case C(UR_GET_STATUS, UT_READ_ENDPOINT):
len = 2;
USETW(sc->sc_hub_desc.stat.wStatus, 0);
break;
case C(UR_SET_ADDRESS, UT_WRITE_DEVICE):
if (value >= OCTUSB_MAX_DEVICES) {
err = USB_ERR_IOERROR;
goto done;
}
sc->sc_addr = value;
break;
case C(UR_SET_CONFIG, UT_WRITE_DEVICE):
if ((value != 0) && (value != 1)) {
err = USB_ERR_IOERROR;
goto done;
}
sc->sc_conf = value;
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_DEVICE):
case C(UR_SET_FEATURE, UT_WRITE_INTERFACE):
case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT):
err = USB_ERR_IOERROR;
goto done;
case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE):
break;
case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT):
break;
/* Hub requests */
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER):
DPRINTFN(4, "UR_CLEAR_PORT_FEATURE "
"port=%d feature=%d\n",
index, value);
if ((index < 1) ||
(index > sc->sc_noport) ||
sc->sc_port[index - 1].disabled) {
err = USB_ERR_IOERROR;
goto done;
}
index--;
switch (value) {
case UHF_PORT_ENABLE:
cvmx_usb_disable(&sc->sc_port[index].state);
break;
case UHF_PORT_SUSPEND:
case UHF_PORT_RESET:
break;
case UHF_C_PORT_CONNECTION:
cvmx_usb_set_status(&sc->sc_port[index].state,
cvmx_usb_get_status(&sc->sc_port[index].state));
break;
case UHF_C_PORT_ENABLE:
cvmx_usb_set_status(&sc->sc_port[index].state,
cvmx_usb_get_status(&sc->sc_port[index].state));
break;
case UHF_C_PORT_OVER_CURRENT:
cvmx_usb_set_status(&sc->sc_port[index].state,
cvmx_usb_get_status(&sc->sc_port[index].state));
break;
case UHF_C_PORT_RESET:
sc->sc_isreset = 0;
goto done;
case UHF_C_PORT_SUSPEND:
break;
case UHF_PORT_CONNECTION:
case UHF_PORT_OVER_CURRENT:
case UHF_PORT_POWER:
case UHF_PORT_LOW_SPEED:
default:
err = USB_ERR_IOERROR;
goto done;
}
break;
case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE):
if ((value & 0xff) != 0) {
err = USB_ERR_IOERROR;
goto done;
}
sc->sc_hubd = octusb_hubd;
sc->sc_hubd.bNbrPorts = sc->sc_noport;
len = sizeof(sc->sc_hubd);
ptr = (const void *)&sc->sc_hubd;
break;
case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE):
len = 16;
memset(sc->sc_hub_desc.temp, 0, 16);
break;
case C(UR_GET_STATUS, UT_READ_CLASS_OTHER):
if ((index < 1) ||
(index > sc->sc_noport) ||
sc->sc_port[index - 1].disabled) {
err = USB_ERR_IOERROR;
goto done;
}
index--;
usb_port_status = cvmx_usb_get_status(&sc->sc_port[index].state);
status = change = 0;
if (usb_port_status.connected)
status |= UPS_CURRENT_CONNECT_STATUS;
if (usb_port_status.port_enabled)
status |= UPS_PORT_ENABLED;
if (usb_port_status.port_over_current)
status |= UPS_OVERCURRENT_INDICATOR;
if (usb_port_status.port_powered)
status |= UPS_PORT_POWER;
switch (usb_port_status.port_speed) {
case CVMX_USB_SPEED_HIGH:
status |= UPS_HIGH_SPEED;
break;
case CVMX_USB_SPEED_FULL:
break;
default:
status |= UPS_LOW_SPEED;
break;
}
if (usb_port_status.connect_change)
change |= UPS_C_CONNECT_STATUS;
if (sc->sc_isreset)
change |= UPS_C_PORT_RESET;
USETW(sc->sc_hub_desc.ps.wPortStatus, status);
USETW(sc->sc_hub_desc.ps.wPortChange, change);
len = sizeof(sc->sc_hub_desc.ps);
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE):
err = USB_ERR_IOERROR;
goto done;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER):
if ((index < 1) ||
(index > sc->sc_noport) ||
sc->sc_port[index - 1].disabled) {
err = USB_ERR_IOERROR;
goto done;
}
index--;
switch (value) {
case UHF_PORT_ENABLE:
break;
case UHF_PORT_RESET:
cvmx_usb_disable(&sc->sc_port[index].state);
if (cvmx_usb_enable(&sc->sc_port[index].state)) {
err = USB_ERR_IOERROR;
goto done;
}
sc->sc_isreset = 1;
goto done;
case UHF_PORT_POWER:
/* pretend we turned on power */
goto done;
case UHF_PORT_SUSPEND:
case UHF_C_PORT_CONNECTION:
case UHF_C_PORT_ENABLE:
case UHF_C_PORT_OVER_CURRENT:
case UHF_PORT_CONNECTION:
case UHF_PORT_OVER_CURRENT:
case UHF_PORT_LOW_SPEED:
case UHF_C_PORT_SUSPEND:
case UHF_C_PORT_RESET:
default:
err = USB_ERR_IOERROR;
goto done;
}
break;
default:
err = USB_ERR_IOERROR;
goto done;
}
done:
*plength = len;
*pptr = ptr;
return (err);
}
static void
octusb_xfer_setup(struct usb_setup_params *parm)
{
struct usb_page_search page_info;
struct usb_page_cache *pc;
struct octusb_softc *sc;
struct octusb_qh *qh;
struct usb_xfer *xfer;
struct usb_device *hub;
void *last_obj;
uint32_t n;
uint32_t ntd;
sc = OCTUSB_BUS2SC(parm->udev->bus);
xfer = parm->curr_xfer;
qh = NULL;
/*
* NOTE: This driver does not use any of the parameters that
* are computed from the following values. Just set some
* reasonable dummies:
*/
parm->hc_max_packet_size = 0x400;
parm->hc_max_packet_count = 3;
parm->hc_max_frame_size = 0xC00;
usbd_transfer_setup_sub(parm);
if (parm->err)
return;
/* Allocate a queue head */
if (usbd_transfer_setup_sub_malloc(
parm, &pc, sizeof(struct octusb_qh),
USB_HOST_ALIGN, 1)) {
parm->err = USB_ERR_NOMEM;
return;
}
if (parm->buf) {
usbd_get_page(pc, 0, &page_info);
qh = page_info.buffer;
/* fill out QH */
qh->sc = OCTUSB_BUS2SC(xfer->xroot->bus);
qh->max_frame_size = xfer->max_frame_size;
qh->max_packet_size = xfer->max_packet_size;
qh->ep_num = xfer->endpointno;
qh->ep_type = xfer->endpoint->edesc->bmAttributes;
qh->dev_addr = xfer->address;
qh->dev_speed = usbd_get_speed(xfer->xroot->udev);
qh->root_port_index = xfer->xroot->udev->port_index;
/* We need Octeon USB HUB's port index, not the local port */
hub = xfer->xroot->udev->parent_hub;
while(hub && hub->parent_hub) {
qh->root_port_index = hub->port_index;
hub = hub->parent_hub;
}
switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) {
case UE_INTERRUPT:
if (usbd_get_speed(xfer->xroot->udev) == USB_SPEED_HIGH)
qh->ep_interval = xfer->interval * 8;
else
qh->ep_interval = xfer->interval * 1;
break;
case UE_ISOCHRONOUS:
qh->ep_interval = 1 << xfer->fps_shift;
break;
default:
qh->ep_interval = 0;
break;
}
qh->ep_mult = xfer->max_packet_count & 3;
qh->hs_hub_addr = xfer->xroot->udev->hs_hub_addr;
qh->hs_hub_port = xfer->xroot->udev->hs_port_no;
}
xfer->qh_start[0] = qh;
/* Allocate a fixup buffer */
if (usbd_transfer_setup_sub_malloc(
parm, &pc, OCTUSB_MAX_FIXUP,
OCTUSB_MAX_FIXUP, 1)) {
parm->err = USB_ERR_NOMEM;
return;
}
if (parm->buf) {
usbd_get_page(pc, 0, &page_info);
qh->fixup_phys = page_info.physaddr;
qh->fixup_pc = pc;
qh->fixup_buf = page_info.buffer;
}
/* Allocate transfer descriptors */
last_obj = NULL;
ntd = xfer->nframes + 1 /* STATUS */ + 1 /* SYNC */ ;
if (usbd_transfer_setup_sub_malloc(
parm, &pc, sizeof(struct octusb_td),
USB_HOST_ALIGN, ntd)) {
parm->err = USB_ERR_NOMEM;
return;
}
if (parm->buf) {
for (n = 0; n != ntd; n++) {
struct octusb_td *td;
usbd_get_page(pc + n, 0, &page_info);
td = page_info.buffer;
td->qh = qh;
td->obj_next = last_obj;
last_obj = td;
}
}
xfer->td_start[0] = last_obj;
}
static void
octusb_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
struct usb_endpoint *ep)
{
struct octusb_softc *sc = OCTUSB_BUS2SC(udev->bus);
DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d)\n",
ep, udev->address, edesc->bEndpointAddress,
udev->flags.usb_mode, sc->sc_addr);
if (udev->device_index != sc->sc_addr) {
switch (edesc->bmAttributes & UE_XFERTYPE) {
case UE_CONTROL:
ep->methods = &octusb_device_ctrl_methods;
break;
case UE_INTERRUPT:
ep->methods = &octusb_device_intr_methods;
break;
case UE_ISOCHRONOUS:
if (udev->speed != USB_SPEED_LOW)
ep->methods = &octusb_device_isoc_methods;
break;
case UE_BULK:
ep->methods = &octusb_device_bulk_methods;
break;
default:
/* do nothing */
break;
}
}
}
static void
octusb_xfer_unsetup(struct usb_xfer *xfer)
{
DPRINTF("Nothing to do.\n");
}
static void
octusb_get_dma_delay(struct usb_device *udev, uint32_t *pus)
{
/* DMA delay - wait until any use of memory is finished */
*pus = (2125); /* microseconds */
}
static void
octusb_device_resume(struct usb_device *udev)
{
DPRINTF("Nothing to do.\n");
}
static void
octusb_device_suspend(struct usb_device *udev)
{
DPRINTF("Nothing to do.\n");
}
static void
octusb_set_hw_power(struct usb_bus *bus)
{
DPRINTF("Nothing to do.\n");
}
static void
octusb_set_hw_power_sleep(struct usb_bus *bus, uint32_t state)
{
struct octusb_softc *sc = OCTUSB_BUS2SC(bus);
switch (state) {
case USB_HW_POWER_SUSPEND:
octusb_suspend(sc);
break;
case USB_HW_POWER_SHUTDOWN:
octusb_uninit(sc);
break;
case USB_HW_POWER_RESUME:
octusb_resume(sc);
break;
default:
break;
}
}
struct usb_bus_methods octusb_bus_methods = {
.endpoint_init = octusb_ep_init,
.xfer_setup = octusb_xfer_setup,
.xfer_unsetup = octusb_xfer_unsetup,
.get_dma_delay = octusb_get_dma_delay,
.device_resume = octusb_device_resume,
.device_suspend = octusb_device_suspend,
.set_hw_power = octusb_set_hw_power,
.set_hw_power_sleep = octusb_set_hw_power_sleep,
.roothub_exec = octusb_roothub_exec,
.xfer_poll = octusb_do_poll,
};
Reference in New Issue View Git Blame Copy Permalink