freebsd-nq/sys/cam/cam.c
Kenneth D. Merry 06e794928b Add Serial Management Protocol (SMP) passthrough support to CAM.
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO.  The SMP CCB is
intended for SMP requests and responses.  The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target.  (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h:		New helper routines for SMP.  This includes
			SMP request building routines, response parsing
			routines, error decoding routines, and structure
			definitions for a number of SMP commands.

libcam/Makefile:	Add smp_all.c to libcam, so that SMP functionality
			is available to userland applications.

camcontrol.8,
camcontrol.c:		Add smp passthrough support to camcontrol.  Several
			new subcommands are now available:

			'smpcmd' functions much like 'cmd', except that it
			allows the user to send generic SMP commands.

			'smprg' sends the SMP report general command, and
			displays the decoded output.  It will automatically
			fetch extended output if it is available.

			'smppc' sends the SMP phy control command, with any
			number of potential options.  Among other things,
			this allows the user to reset a phy on a SAS
			expander, or disable a phy on an expander.

			'smpmaninfo' sends the SMP report manufacturer
			information and displays the decoded output.

			'smpphylist' displays a list of phys on an
			expander, and the CAM devices attached to those
			phys, if any.

cam.h,
cam.c:			Add a status value for SMP errors
			(CAM_SMP_STATUS_ERROR).

			Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

			Add support for SMP commands to cam_error_string().

cam_ccb.h:		Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH.  SMP
			commands are by nature bi-directional, and we may
			need to support bi-directional SCSI commands later.

			Add the XPT_SMP_IO CCB.  Since SMP commands are
			bi-directional, there are pointers for both the
			request and response.

			Add a fill routine for SMP CCBs.

			Add the XPT_GDEV_ADVINFO CCB.  This is currently
			used to fetch cached page 0x83 data from the
			transport later, but is extensible to fetch many
			other types of data.

cam_periph.c:		Add support in cam_periph_mapmem() for XPT_SMP_IO
			and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c:		Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h:	Add fields for VPD pages 0x00 and 0x83 in struct
			cam_ed.

scsi_all.c:		Add scsi_get_sas_addr(), a function that parses
			VPD page 0x83 data and pulls out a SAS address.

scsi_all.h:		Add VPD page 0x00 and 0x83 structures, and a
			prototype for scsi_get_sas_addr().

scsi_pass.c:		Add support for mapping buffers in XPT_SMP_IO and
			XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c:		In the SCSI probe code, first ask the device for
			VPD page 0x00.  If any VPD pages are supported,
			that page is required to be implemented.  Based on
			the response, we may probe for the serial number
			(page 0x80) or device id (page 0x83).

			Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files:		Add smp_all.c.

mps.c:			Add support for passing in a uio in mps_map_command(),
			so we can map a S/G list at once.

			Add support for SMP passthrough commands in
			mps_data_cb().  SMP is a special case, because the
			first buffer in the S/G list is outbound and the
			second buffer is inbound.

			Add support for warning the user if the busdma code
			comes back with more buffers than will work for the
			command.  This will, for example, help the user
			determine why an SMP command failed if busdma comes
			back with three buffers.

mps_pci.c:		Add sys/uio.h.

mps_sas.c:		Add the SAS address and the parent handle to the
			list of fields we pull from device page 0 and cache
			in struct mpssas_target.  These are needed for SMP
			passthrough.

			Add support for the XPT_SMP_IO CCB.  For now, this
			CCB is routed to the addressed device if it supports
			SMP, or to its parent if it does not and the parent
			does.  This is necessary because CAM does not
			currently support SMP-only nodes in the topology.

			Make SMP passthrough support conditional on
			__FreeBSD_version >= 900026.  This will make it
			easier to MFC this change to the driver without
			MFCing the CAM changes as well.

mps_user.c:		Un-staticize mpi_init_sge() so we can use it for
			the SMP passthrough code.

mpsvar.h:		Add a uio and iovecs into struct mps_command for
			SMP passthrough commands.

			Add a cm_max_segs field to struct mps_command so
			that we can warn the user if busdma comes back with
			too many segments.

			Clear the cm_reply when a command gets freed.  If
			it is not cleared, reply frames will eventually get
			freed into the pool multiple times and corrupt the
			pool.  (This fix is from scottl.)

			Add a prototype for mpi_init_sge().

sys/param.h:		Bump __FreeBSD_version to 900026 for the for the
			inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
			CAM CCBs.
2010-11-30 22:39:46 +00:00

473 lines
13 KiB
C

/*-
* Generic utility routines for the Common Access Method layer.
*
* Copyright (c) 1997 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#ifdef _KERNEL
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#else /* _KERNEL */
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <camlib.h>
#endif /* _KERNEL */
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/smp_all.h>
#include <sys/sbuf.h>
#ifdef _KERNEL
#include <sys/libkern.h>
#include <cam/cam_queue.h>
#include <cam/cam_xpt.h>
#endif
static int camstatusentrycomp(const void *key, const void *member);
const struct cam_status_entry cam_status_table[] = {
{ CAM_REQ_INPROG, "CCB request is in progress" },
{ CAM_REQ_CMP, "CCB request completed without error" },
{ CAM_REQ_ABORTED, "CCB request aborted by the host" },
{ CAM_UA_ABORT, "Unable to abort CCB request" },
{ CAM_REQ_CMP_ERR, "CCB request completed with an error" },
{ CAM_BUSY, "CAM subsystem is busy" },
{ CAM_REQ_INVALID, "CCB request was invalid" },
{ CAM_PATH_INVALID, "Supplied Path ID is invalid" },
{ CAM_DEV_NOT_THERE, "Device Not Present" },
{ CAM_UA_TERMIO, "Unable to terminate I/O CCB request" },
{ CAM_SEL_TIMEOUT, "Selection Timeout" },
{ CAM_CMD_TIMEOUT, "Command timeout" },
{ CAM_SCSI_STATUS_ERROR, "SCSI Status Error" },
{ CAM_MSG_REJECT_REC, "Message Reject Reveived" },
{ CAM_SCSI_BUS_RESET, "SCSI Bus Reset Sent/Received" },
{ CAM_UNCOR_PARITY, "Uncorrectable parity/CRC error" },
{ CAM_AUTOSENSE_FAIL, "Auto-Sense Retrieval Failed" },
{ CAM_NO_HBA, "No HBA Detected" },
{ CAM_DATA_RUN_ERR, "Data Overrun error" },
{ CAM_UNEXP_BUSFREE, "Unexpected Bus Free" },
{ CAM_SEQUENCE_FAIL, "Target Bus Phase Sequence Failure" },
{ CAM_CCB_LEN_ERR, "CCB length supplied is inadequate" },
{ CAM_PROVIDE_FAIL, "Unable to provide requested capability" },
{ CAM_BDR_SENT, "SCSI BDR Message Sent" },
{ CAM_REQ_TERMIO, "CCB request terminated by the host" },
{ CAM_UNREC_HBA_ERROR, "Unrecoverable Host Bus Adapter Error" },
{ CAM_REQ_TOO_BIG, "The request was too large for this host" },
{ CAM_REQUEUE_REQ, "Unconditionally Re-queue Request", },
{ CAM_ATA_STATUS_ERROR, "ATA Status Error" },
{ CAM_SCSI_IT_NEXUS_LOST,"Initiator/Target Nexus Lost" },
{ CAM_SMP_STATUS_ERROR, "SMP Status Error" },
{ CAM_IDE, "Initiator Detected Error Message Received" },
{ CAM_RESRC_UNAVAIL, "Resource Unavailable" },
{ CAM_UNACKED_EVENT, "Unacknowledged Event by Host" },
{ CAM_MESSAGE_RECV, "Message Received in Host Target Mode" },
{ CAM_INVALID_CDB, "Invalid CDB received in Host Target Mode" },
{ CAM_LUN_INVALID, "Invalid Lun" },
{ CAM_TID_INVALID, "Invalid Target ID" },
{ CAM_FUNC_NOTAVAIL, "Function Not Available" },
{ CAM_NO_NEXUS, "Nexus Not Established" },
{ CAM_IID_INVALID, "Invalid Initiator ID" },
{ CAM_CDB_RECVD, "CDB Received" },
{ CAM_LUN_ALRDY_ENA, "LUN Already Enabled for Target Mode" },
{ CAM_SCSI_BUSY, "SCSI Bus Busy" },
};
const int num_cam_status_entries =
sizeof(cam_status_table)/sizeof(*cam_status_table);
#ifdef _KERNEL
SYSCTL_NODE(_kern, OID_AUTO, cam, CTLFLAG_RD, 0, "CAM Subsystem");
#endif
void
cam_strvis(u_int8_t *dst, const u_int8_t *src, int srclen, int dstlen)
{
/* Trim leading/trailing spaces, nulls. */
while (srclen > 0 && src[0] == ' ')
src++, srclen--;
while (srclen > 0
&& (src[srclen-1] == ' ' || src[srclen-1] == '\0'))
srclen--;
while (srclen > 0 && dstlen > 1) {
u_int8_t *cur_pos = dst;
if (*src < 0x20 || *src >= 0x80) {
/* SCSI-II Specifies that these should never occur. */
/* non-printable character */
if (dstlen > 4) {
*cur_pos++ = '\\';
*cur_pos++ = ((*src & 0300) >> 6) + '0';
*cur_pos++ = ((*src & 0070) >> 3) + '0';
*cur_pos++ = ((*src & 0007) >> 0) + '0';
} else {
*cur_pos++ = '?';
}
} else {
/* normal character */
*cur_pos++ = *src;
}
src++;
srclen--;
dstlen -= cur_pos - dst;
dst = cur_pos;
}
*dst = '\0';
}
/*
* Compare string with pattern, returning 0 on match.
* Short pattern matches trailing blanks in name,
* wildcard '*' in pattern matches rest of name,
* wildcard '?' matches a single non-space character.
*/
int
cam_strmatch(const u_int8_t *str, const u_int8_t *pattern, int str_len)
{
while (*pattern != '\0'&& str_len > 0) {
if (*pattern == '*') {
return (0);
}
if ((*pattern != *str)
&& (*pattern != '?' || *str == ' ')) {
return (1);
}
pattern++;
str++;
str_len--;
}
while (str_len > 0 && *str == ' ') {
str++;
str_len--;
}
if (str_len > 0 && *str == 0)
str_len = 0;
return (str_len);
}
caddr_t
cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
int entry_size, cam_quirkmatch_t *comp_func)
{
for (; num_entries > 0; num_entries--, quirk_table += entry_size) {
if ((*comp_func)(target, quirk_table) == 0)
return (quirk_table);
}
return (NULL);
}
const struct cam_status_entry*
cam_fetch_status_entry(cam_status status)
{
status &= CAM_STATUS_MASK;
return (bsearch(&status, &cam_status_table,
num_cam_status_entries,
sizeof(*cam_status_table),
camstatusentrycomp));
}
static int
camstatusentrycomp(const void *key, const void *member)
{
cam_status status;
const struct cam_status_entry *table_entry;
status = *(const cam_status *)key;
table_entry = (const struct cam_status_entry *)member;
return (status - table_entry->status_code);
}
#ifdef _KERNEL
char *
cam_error_string(union ccb *ccb, char *str, int str_len,
cam_error_string_flags flags,
cam_error_proto_flags proto_flags)
#else /* !_KERNEL */
char *
cam_error_string(struct cam_device *device, union ccb *ccb, char *str,
int str_len, cam_error_string_flags flags,
cam_error_proto_flags proto_flags)
#endif /* _KERNEL/!_KERNEL */
{
char path_str[64];
struct sbuf sb;
if ((ccb == NULL)
|| (str == NULL)
|| (str_len <= 0))
return(NULL);
if (flags == CAM_ESF_NONE)
return(NULL);
switch (ccb->ccb_h.func_code) {
case XPT_ATA_IO:
switch (proto_flags & CAM_EPF_LEVEL_MASK) {
case CAM_EPF_NONE:
break;
case CAM_EPF_ALL:
case CAM_EPF_NORMAL:
proto_flags |= CAM_EAF_PRINT_RESULT;
/* FALLTHROUGH */
case CAM_EPF_MINIMAL:
proto_flags |= CAM_EAF_PRINT_STATUS;
/* FALLTHROUGH */
default:
break;
}
break;
case XPT_SCSI_IO:
switch (proto_flags & CAM_EPF_LEVEL_MASK) {
case CAM_EPF_NONE:
break;
case CAM_EPF_ALL:
case CAM_EPF_NORMAL:
proto_flags |= CAM_ESF_PRINT_SENSE;
/* FALLTHROUGH */
case CAM_EPF_MINIMAL:
proto_flags |= CAM_ESF_PRINT_STATUS;
/* FALLTHROUGH */
default:
break;
}
break;
case XPT_SMP_IO:
switch (proto_flags & CAM_EPF_LEVEL_MASK) {
case CAM_EPF_NONE:
break;
case CAM_EPF_ALL:
proto_flags |= CAM_ESMF_PRINT_FULL_CMD;
/* FALLTHROUGH */
case CAM_EPF_NORMAL:
case CAM_EPF_MINIMAL:
proto_flags |= CAM_ESMF_PRINT_STATUS;
/* FALLTHROUGH */
default:
break;
}
break;
default:
break;
}
#ifdef _KERNEL
xpt_path_string(ccb->csio.ccb_h.path, path_str, sizeof(path_str));
#else /* !_KERNEL */
cam_path_string(device, path_str, sizeof(path_str));
#endif /* _KERNEL/!_KERNEL */
sbuf_new(&sb, str, str_len, 0);
if (flags & CAM_ESF_COMMAND) {
sbuf_cat(&sb, path_str);
switch (ccb->ccb_h.func_code) {
case XPT_ATA_IO:
ata_command_sbuf(&ccb->ataio, &sb);
sbuf_printf(&sb, "\n");
break;
case XPT_SCSI_IO:
#ifdef _KERNEL
scsi_command_string(&ccb->csio, &sb);
#else /* !_KERNEL */
scsi_command_string(device, &ccb->csio, &sb);
#endif /* _KERNEL/!_KERNEL */
sbuf_printf(&sb, "\n");
break;
case XPT_SMP_IO:
smp_command_sbuf(&ccb->smpio, &sb, path_str, 79 -
strlen(path_str), (proto_flags &
CAM_ESMF_PRINT_FULL_CMD) ? 79 : 0);
sbuf_printf(&sb, "\n");
break;
default:
break;
}
}
if (flags & CAM_ESF_CAM_STATUS) {
cam_status status;
const struct cam_status_entry *entry;
sbuf_cat(&sb, path_str);
status = ccb->ccb_h.status & CAM_STATUS_MASK;
entry = cam_fetch_status_entry(status);
if (entry == NULL)
sbuf_printf(&sb, "CAM status: Unknown (%#x)\n",
ccb->ccb_h.status);
else
sbuf_printf(&sb, "CAM status: %s\n",
entry->status_text);
}
if (flags & CAM_ESF_PROTO_STATUS) {
switch (ccb->ccb_h.func_code) {
case XPT_ATA_IO:
if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
CAM_ATA_STATUS_ERROR)
break;
if (proto_flags & CAM_EAF_PRINT_STATUS) {
sbuf_cat(&sb, path_str);
ata_status_sbuf(&ccb->ataio, &sb);
sbuf_printf(&sb, "\n");
}
if (proto_flags & CAM_EAF_PRINT_RESULT) {
sbuf_cat(&sb, path_str);
ata_res_sbuf(&ccb->ataio, &sb);
sbuf_printf(&sb, "\n");
}
break;
case XPT_SCSI_IO:
if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
CAM_SCSI_STATUS_ERROR)
break;
if (proto_flags & CAM_ESF_PRINT_STATUS) {
sbuf_cat(&sb, path_str);
sbuf_printf(&sb, "SCSI status: %s\n",
scsi_status_string(&ccb->csio));
}
if ((proto_flags & CAM_ESF_PRINT_SENSE)
&& (ccb->csio.scsi_status == SCSI_STATUS_CHECK_COND)
&& (ccb->ccb_h.status & CAM_AUTOSNS_VALID)) {
#ifdef _KERNEL
scsi_sense_sbuf(&ccb->csio, &sb,
SSS_FLAG_NONE);
#else /* !_KERNEL */
scsi_sense_sbuf(device, &ccb->csio, &sb,
SSS_FLAG_NONE);
#endif /* _KERNEL/!_KERNEL */
}
break;
case XPT_SMP_IO:
if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
CAM_SMP_STATUS_ERROR)
break;
if (proto_flags & CAM_ESF_PRINT_STATUS) {
sbuf_cat(&sb, path_str);
sbuf_printf(&sb, "SMP status: %s (%#x)\n",
smp_error_desc(ccb->smpio.smp_response[2]),
ccb->smpio.smp_response[2]);
}
/* There is no SMP equivalent to SCSI sense. */
break;
default:
break;
}
}
sbuf_finish(&sb);
return(sbuf_data(&sb));
}
#ifdef _KERNEL
void
cam_error_print(union ccb *ccb, cam_error_string_flags flags,
cam_error_proto_flags proto_flags)
{
char str[512];
printf("%s", cam_error_string(ccb, str, sizeof(str), flags,
proto_flags));
}
#else /* !_KERNEL */
void
cam_error_print(struct cam_device *device, union ccb *ccb,
cam_error_string_flags flags, cam_error_proto_flags proto_flags,
FILE *ofile)
{
char str[512];
if ((device == NULL) || (ccb == NULL) || (ofile == NULL))
return;
fprintf(ofile, "%s", cam_error_string(device, ccb, str, sizeof(str),
flags, proto_flags));
}
#endif /* _KERNEL/!_KERNEL */
/*
* Common calculate geometry fuction
*
* Caller should set ccg->volume_size and block_size.
* The extended parameter should be zero if extended translation
* should not be used.
*/
void
cam_calc_geometry(struct ccb_calc_geometry *ccg, int extended)
{
uint32_t size_mb, secs_per_cylinder;
if (ccg->block_size == 0) {
ccg->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
size_mb = (1024L * 1024L) / ccg->block_size;
if (size_mb == 0) {
ccg->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
size_mb = ccg->volume_size / size_mb;
if (size_mb > 1024 && extended) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
if (secs_per_cylinder == 0) {
ccg->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccg->ccb_h.status = CAM_REQ_CMP;
}