freebsd-nq/sys/i386/isa/sound/sound_config.h
Seigo Tanimura fdba49eb7e Add support of SB for PC98 into VoxWare 3.5, and more $FreeBSD$.
Submitted by:		T.Yamaoka <taka@windows.squares.net>
Pressed to review by:	nyan
1999-12-27 04:37:19 +00:00

212 lines
5.6 KiB
C

/* sound_config.h
*
* A driver for Soundcards, misc configuration parameters.
*
* Copyright by Hannu Savolainen 1995
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
/*
* many variables should be reduced to a range. Here define a macro
*/
#define RANGE(var, low, high) (var) = \
((var)<(low)?(low) : (var)>(high)?(high) : (var))
#undef CONFIGURE_SOUNDCARD
#undef DYNAMIC_BUFFER
#include <i386/isa/sound/local.h>
#define CONFIGURE_SOUNDCARD
#define DYNAMIC_BUFFER
#undef LOADABLE_SOUNDCARD
#include <i386/isa/sound/os.h>
#include <i386/isa/sound/soundvers.h>
#if defined(ISC) || defined(SCO) || defined(SVR42)
#define GENERIC_SYSV
#endif
#ifndef SND_DEFAULT_ENABLE
#define SND_DEFAULT_ENABLE 1
#endif
#ifdef CONFIGURE_SOUNDCARD
#ifndef MAX_REALTIME_FACTOR
#define MAX_REALTIME_FACTOR 4
#endif
/************* PCM DMA buffer sizes *******************/
/* If you are using high playback or recording speeds, the default buffersize
is too small. DSP_BUFFSIZE must be 64k or less.
A rule of thumb is 64k for PAS16, 32k for PAS+, 16k for SB Pro and
4k for SB.
If you change the DSP_BUFFSIZE, don't modify this file.
Use the make config command instead. Seems to allow only 4K, 16K,
32K, 64K.
*/
#ifndef DSP_BUFFSIZE
#define DSP_BUFFSIZE (32760)
#endif
#ifndef DSP_BUFFCOUNT
#define DSP_BUFFCOUNT 1 /* 1 is recommended. */
#endif
#define DMA_AUTOINIT 0x10 /* XXX never used */
#ifdef PC98
#define FM_MONO 0x28d2
#else
#define FM_MONO 0x388 /* This is the I/O address used by AdLib */
#endif
#ifndef AWE32_BASE
#define AWE32_BASE 0x620 /* Default = 0x620-3, 0xA20-3, 0xE20-3 */
#endif
#ifndef PAS_BASE
#define PAS_BASE 0x388
#endif
#ifdef JAZZ16
#ifndef JAZZ_DMA16
#define JAZZ_DMA16 5
#endif
#endif
/* SEQ_MAX_QUEUE is the maximum number of sequencer events buffered by the
driver. (There is no need to alter this) */
#define SEQ_MAX_QUEUE 1024
#define SBFM_MAXINSTR (256) /* Size of the FM Instrument bank */
/* 128 instruments for general MIDI setup and 16 unassigned */
/*
* Minor numbers for the sound driver.
*
* Unfortunately Creative called the codec chip of SB as a DSP. For this
* reason the /dev/dsp is reserved for digitized audio use. There is a
* device for true DSP processors but it will be called something else.
* In v3.0 it's /dev/sndproc but this could be a temporary solution.
*/
#define SND_NDEVS 256 /* Number of supported devices */
#define SND_DEV_CTL 0 /* Control port /dev/mixer */
#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
synthesizer and MIDI output) */
#define SND_DEV_MIDIN 2 /* Raw midi access */
#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
#define SND_DEV_STATUS 6 /* /dev/sndstat */
/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */
#define SND_DEV_PSS SND_DEV_SNDPROC
#define DSP_DEFAULT_SPEED 8000
#define ON 1
#define OFF 0
#define MAX_AUDIO_DEV 5
#define MAX_MIXER_DEV 5
#define MAX_SYNTH_DEV 3
#define MAX_MIDI_DEV 6
#define MAX_TIMER_DEV 3
struct fileinfo {
int mode; /* Open mode */
int flags;
int dummy; /* Reference to file-flags. OS-dependent. */
};
struct address_info {
int io_base;
int irq;
int dma;
int dma2;
int always_detect; /* 1=Trust me, it's there */
char *name;
sound_os_info *osp; /* OS specific info */
int card_subtype; /* Driver specific. Usually 0 */
};
#define SYNTH_MAX_VOICES 32
struct voice_alloc_info {
int max_voice;
int used_voices;
int ptr; /* For device specific use */
unsigned short map[SYNTH_MAX_VOICES]; /* (ch << 8) | (note+1) */
int timestamp;
int alloc_times[SYNTH_MAX_VOICES];
};
struct channel_info {
int pgm_num;
int bender_value;
unsigned char controllers[128];
};
/*
* Process wakeup reasons
*/
#define WK_NONE 0x00
#define WK_WAKEUP 0x01
#define WK_TIMEOUT 0x02
#define WK_SIGNAL 0x04
#define WK_SLEEP 0x08
#define OPEN_READ PCM_ENABLE_INPUT
#define OPEN_WRITE PCM_ENABLE_OUTPUT
#define OPEN_READWRITE (OPEN_READ|OPEN_WRITE)
#include <i386/isa/sound/sound_calls.h>
#include <i386/isa/sound/dev_table.h>
#ifndef DEB
#define DEB(x)
#endif
#ifndef DDB
/* #define DDB(x) x XXX */
#define DDB(x)
#endif
#define TIMER_ARMED 121234
#define TIMER_NOT_ARMED 1
#endif