freebsd-nq/sys/kern/kern_synch.c
Julian Elischer 93a7aa79d6 Add code to ddb to allow backtracing an arbitrary thread.
(show thread {address})

Remove the IDLE kse state and replace it with a change in
the way threads sahre KSEs. Every KSE now has a thread, which is
considered its "owner" however a KSE may also be lent to other
threads in the same group to allow completion of in-kernel work.
n this case the owner remains the same and the KSE will revert to the
owner when the other work has been completed.

All creations of upcalls etc. is now done from
kse_reassign() which in turn is called from mi_switch or
thread_exit(). This means that special code can be removed from
msleep() and cv_wait().

kse_release() does not leave a KSE with no thread any more but
converts the existing thread into teh KSE's owner, and sets it up
for doing an upcall. It is just inhibitted from being scheduled until
there is some reason to do an upcall.

Remove all trace of the kse_idle queue since it is no-longer needed.
"Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00

666 lines
17 KiB
C

/*-
* Copyright (c) 1982, 1986, 1990, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_synch.c 8.9 (Berkeley) 5/19/95
* $FreeBSD$
*/
#include "opt_ddb.h"
#include "opt_ktrace.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/condvar.h>
#include <sys/kernel.h>
#include <sys/ktr.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/resourcevar.h>
#include <sys/sched.h>
#include <sys/signalvar.h>
#include <sys/smp.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/sysproto.h>
#include <sys/vmmeter.h>
#ifdef DDB
#include <ddb/ddb.h>
#endif
#ifdef KTRACE
#include <sys/uio.h>
#include <sys/ktrace.h>
#endif
#include <machine/cpu.h>
static void sched_setup(void *dummy);
SYSINIT(sched_setup, SI_SUB_KICK_SCHEDULER, SI_ORDER_FIRST, sched_setup, NULL)
int hogticks;
int lbolt;
static struct callout loadav_callout;
static struct callout lbolt_callout;
struct loadavg averunnable =
{ {0, 0, 0}, FSCALE }; /* load average, of runnable procs */
/*
* Constants for averages over 1, 5, and 15 minutes
* when sampling at 5 second intervals.
*/
static fixpt_t cexp[3] = {
0.9200444146293232 * FSCALE, /* exp(-1/12) */
0.9834714538216174 * FSCALE, /* exp(-1/60) */
0.9944598480048967 * FSCALE, /* exp(-1/180) */
};
/* kernel uses `FSCALE', userland (SHOULD) use kern.fscale */
static int fscale __unused = FSCALE;
SYSCTL_INT(_kern, OID_AUTO, fscale, CTLFLAG_RD, 0, FSCALE, "");
static void endtsleep(void *);
static void loadav(void *arg);
static void lboltcb(void *arg);
/*
* We're only looking at 7 bits of the address; everything is
* aligned to 4, lots of things are aligned to greater powers
* of 2. Shift right by 8, i.e. drop the bottom 256 worth.
*/
#define TABLESIZE 128
static TAILQ_HEAD(slpquehead, thread) slpque[TABLESIZE];
#define LOOKUP(x) (((intptr_t)(x) >> 8) & (TABLESIZE - 1))
void
sleepinit(void)
{
int i;
hogticks = (hz / 10) * 2; /* Default only. */
for (i = 0; i < TABLESIZE; i++)
TAILQ_INIT(&slpque[i]);
}
/*
* General sleep call. Suspends the current process until a wakeup is
* performed on the specified identifier. The process will then be made
* runnable with the specified priority. Sleeps at most timo/hz seconds
* (0 means no timeout). If pri includes PCATCH flag, signals are checked
* before and after sleeping, else signals are not checked. Returns 0 if
* awakened, EWOULDBLOCK if the timeout expires. If PCATCH is set and a
* signal needs to be delivered, ERESTART is returned if the current system
* call should be restarted if possible, and EINTR is returned if the system
* call should be interrupted by the signal (return EINTR).
*
* The mutex argument is exited before the caller is suspended, and
* entered before msleep returns. If priority includes the PDROP
* flag the mutex is not entered before returning.
*/
int
msleep(ident, mtx, priority, wmesg, timo)
void *ident;
struct mtx *mtx;
int priority, timo;
const char *wmesg;
{
struct thread *td = curthread;
struct proc *p = td->td_proc;
int sig, catch = priority & PCATCH;
int rval = 0;
WITNESS_SAVE_DECL(mtx);
#ifdef KTRACE
if (KTRPOINT(td, KTR_CSW))
ktrcsw(1, 0);
#endif
WITNESS_SLEEP(0, &mtx->mtx_object);
KASSERT(timo != 0 || mtx_owned(&Giant) || mtx != NULL,
("sleeping without a mutex"));
/*
* If we are capable of async syscalls and there isn't already
* another one ready to return, start a new thread
* and queue it as ready to run. Note that there is danger here
* because we need to make sure that we don't sleep allocating
* the thread (recursion here might be bad).
* Hence the TDF_INMSLEEP flag.
*/
if (p->p_flag & P_KSES) {
/*
* Just don't bother if we are exiting
* and not the exiting thread or thread was marked as
* interrupted.
*/
if (catch &&
(((p->p_flag & P_WEXIT) && (p->p_singlethread != td)) ||
(td->td_flags & TDF_INTERRUPT))) {
td->td_flags &= ~TDF_INTERRUPT;
return (EINTR);
}
}
mtx_lock_spin(&sched_lock);
if (cold ) {
/*
* During autoconfiguration, just give interrupts
* a chance, then just return.
* Don't run any other procs or panic below,
* in case this is the idle process and already asleep.
*/
if (mtx != NULL && priority & PDROP)
mtx_unlock(mtx);
mtx_unlock_spin(&sched_lock);
return (0);
}
DROP_GIANT();
if (mtx != NULL) {
mtx_assert(mtx, MA_OWNED | MA_NOTRECURSED);
WITNESS_SAVE(&mtx->mtx_object, mtx);
mtx_unlock(mtx);
if (priority & PDROP)
mtx = NULL;
}
KASSERT(p != NULL, ("msleep1"));
KASSERT(ident != NULL && TD_IS_RUNNING(td), ("msleep"));
CTR5(KTR_PROC, "msleep: thread %p (pid %d, %s) on %s (%p)",
td, p->p_pid, p->p_comm, wmesg, ident);
td->td_wchan = ident;
td->td_wmesg = wmesg;
TAILQ_INSERT_TAIL(&slpque[LOOKUP(ident)], td, td_slpq);
TD_SET_ON_SLEEPQ(td);
if (timo)
callout_reset(&td->td_slpcallout, timo, endtsleep, td);
/*
* We put ourselves on the sleep queue and start our timeout
* before calling thread_suspend_check, as we could stop there, and
* a wakeup or a SIGCONT (or both) could occur while we were stopped.
* without resuming us, thus we must be ready for sleep
* when cursig is called. If the wakeup happens while we're
* stopped, td->td_wchan will be 0 upon return from cursig.
*/
if (catch) {
CTR3(KTR_PROC, "msleep caught: thread %p (pid %d, %s)", td,
p->p_pid, p->p_comm);
td->td_flags |= TDF_SINTR;
mtx_unlock_spin(&sched_lock);
PROC_LOCK(p);
sig = cursig(td);
if (sig == 0 && thread_suspend_check(1))
sig = SIGSTOP;
mtx_lock_spin(&sched_lock);
PROC_UNLOCK(p);
if (sig != 0) {
if (TD_ON_SLEEPQ(td))
unsleep(td);
} else if (!TD_ON_SLEEPQ(td))
catch = 0;
} else
sig = 0;
/*
* Let the scheduler know we're about to voluntarily go to sleep.
*/
sched_sleep(td, priority & PRIMASK);
if (TD_ON_SLEEPQ(td)) {
p->p_stats->p_ru.ru_nvcsw++;
TD_SET_SLEEPING(td);
mi_switch();
}
/*
* We're awake from voluntary sleep.
*/
CTR3(KTR_PROC, "msleep resume: thread %p (pid %d, %s)", td, p->p_pid,
p->p_comm);
KASSERT(TD_IS_RUNNING(td), ("running but not TDS_RUNNING"));
td->td_flags &= ~TDF_SINTR;
if (td->td_flags & TDF_TIMEOUT) {
td->td_flags &= ~TDF_TIMEOUT;
if (sig == 0)
rval = EWOULDBLOCK;
} else if (td->td_flags & TDF_TIMOFAIL) {
td->td_flags &= ~TDF_TIMOFAIL;
} else if (timo && callout_stop(&td->td_slpcallout) == 0) {
/*
* This isn't supposed to be pretty. If we are here, then
* the endtsleep() callout is currently executing on another
* CPU and is either spinning on the sched_lock or will be
* soon. If we don't synchronize here, there is a chance
* that this process may msleep() again before the callout
* has a chance to run and the callout may end up waking up
* the wrong msleep(). Yuck.
*/
TD_SET_SLEEPING(td);
p->p_stats->p_ru.ru_nivcsw++;
mi_switch();
td->td_flags &= ~TDF_TIMOFAIL;
}
if ((td->td_flags & TDF_INTERRUPT) && (priority & PCATCH) &&
(rval == 0)) {
td->td_flags &= ~TDF_INTERRUPT;
rval = EINTR;
}
mtx_unlock_spin(&sched_lock);
if (rval == 0 && catch) {
PROC_LOCK(p);
/* XXX: shouldn't we always be calling cursig() */
if (sig != 0 || (sig = cursig(td))) {
if (SIGISMEMBER(p->p_sigacts->ps_sigintr, sig))
rval = EINTR;
else
rval = ERESTART;
}
PROC_UNLOCK(p);
}
#ifdef KTRACE
if (KTRPOINT(td, KTR_CSW))
ktrcsw(0, 0);
#endif
PICKUP_GIANT();
if (mtx != NULL) {
mtx_lock(mtx);
WITNESS_RESTORE(&mtx->mtx_object, mtx);
}
return (rval);
}
/*
* Implement timeout for msleep()
*
* If process hasn't been awakened (wchan non-zero),
* set timeout flag and undo the sleep. If proc
* is stopped, just unsleep so it will remain stopped.
* MP-safe, called without the Giant mutex.
*/
static void
endtsleep(arg)
void *arg;
{
register struct thread *td = arg;
CTR3(KTR_PROC, "endtsleep: thread %p (pid %d, %s)",
td, td->td_proc->p_pid, td->td_proc->p_comm);
mtx_lock_spin(&sched_lock);
/*
* This is the other half of the synchronization with msleep()
* described above. If the TDS_TIMEOUT flag is set, we lost the
* race and just need to put the process back on the runqueue.
*/
if (TD_ON_SLEEPQ(td)) {
TAILQ_REMOVE(&slpque[LOOKUP(td->td_wchan)], td, td_slpq);
TD_CLR_ON_SLEEPQ(td);
td->td_flags |= TDF_TIMEOUT;
} else {
td->td_flags |= TDF_TIMOFAIL;
}
TD_CLR_SLEEPING(td);
setrunnable(td);
mtx_unlock_spin(&sched_lock);
}
/*
* Abort a thread, as if an interrupt had occured. Only abort
* interruptable waits (unfortunatly it isn't only safe to abort others).
* This is about identical to cv_abort().
* Think about merging them?
* Also, whatever the signal code does...
*/
void
abortsleep(struct thread *td)
{
mtx_assert(&sched_lock, MA_OWNED);
/*
* If the TDF_TIMEOUT flag is set, just leave. A
* timeout is scheduled anyhow.
*/
if ((td->td_flags & (TDF_TIMEOUT | TDF_SINTR)) == TDF_SINTR) {
if (TD_ON_SLEEPQ(td)) {
unsleep(td);
TD_CLR_SLEEPING(td);
setrunnable(td);
}
}
}
/*
* Remove a process from its wait queue
*/
void
unsleep(struct thread *td)
{
mtx_lock_spin(&sched_lock);
if (TD_ON_SLEEPQ(td)) {
TAILQ_REMOVE(&slpque[LOOKUP(td->td_wchan)], td, td_slpq);
TD_CLR_ON_SLEEPQ(td);
}
mtx_unlock_spin(&sched_lock);
}
/*
* Make all processes sleeping on the specified identifier runnable.
*/
void
wakeup(ident)
register void *ident;
{
register struct slpquehead *qp;
register struct thread *td;
struct thread *ntd;
struct proc *p;
mtx_lock_spin(&sched_lock);
qp = &slpque[LOOKUP(ident)];
restart:
for (td = TAILQ_FIRST(qp); td != NULL; td = ntd) {
ntd = TAILQ_NEXT(td, td_slpq);
if (td->td_wchan == ident) {
unsleep(td);
TD_CLR_SLEEPING(td);
setrunnable(td);
p = td->td_proc;
CTR3(KTR_PROC,"wakeup: thread %p (pid %d, %s)",
td, p->p_pid, p->p_comm);
goto restart;
}
}
mtx_unlock_spin(&sched_lock);
}
/*
* Make a process sleeping on the specified identifier runnable.
* May wake more than one process if a target process is currently
* swapped out.
*/
void
wakeup_one(ident)
register void *ident;
{
register struct slpquehead *qp;
register struct thread *td;
register struct proc *p;
struct thread *ntd;
mtx_lock_spin(&sched_lock);
qp = &slpque[LOOKUP(ident)];
for (td = TAILQ_FIRST(qp); td != NULL; td = ntd) {
ntd = TAILQ_NEXT(td, td_slpq);
if (td->td_wchan == ident) {
unsleep(td);
TD_CLR_SLEEPING(td);
setrunnable(td);
p = td->td_proc;
CTR3(KTR_PROC,"wakeup1: thread %p (pid %d, %s)",
td, p->p_pid, p->p_comm);
break;
}
}
mtx_unlock_spin(&sched_lock);
}
/*
* The machine independent parts of mi_switch().
*/
void
mi_switch(void)
{
struct bintime new_switchtime;
struct thread *td = curthread; /* XXX */
struct proc *p = td->td_proc; /* XXX */
struct kse *ke = td->td_kse;
u_int sched_nest;
mtx_assert(&sched_lock, MA_OWNED | MA_NOTRECURSED);
KASSERT(!TD_ON_RUNQ(td), ("mi_switch: called by old code"));
#ifdef INVARIANTS
if (!TD_ON_LOCK(td) &&
!TD_ON_RUNQ(td) &&
!TD_IS_RUNNING(td))
mtx_assert(&Giant, MA_NOTOWNED);
#endif
KASSERT(td->td_critnest == 1,
("mi_switch: switch in a critical section"));
/*
* Compute the amount of time during which the current
* process was running, and add that to its total so far.
*/
binuptime(&new_switchtime);
bintime_add(&p->p_runtime, &new_switchtime);
bintime_sub(&p->p_runtime, PCPU_PTR(switchtime));
#ifdef DDB
/*
* Don't perform context switches from the debugger.
*/
if (db_active) {
mtx_unlock_spin(&sched_lock);
db_error("Context switches not allowed in the debugger.");
}
#endif
/*
* Check if the process exceeds its cpu resource allocation. If
* over max, arrange to kill the process in ast().
*/
if (p->p_cpulimit != RLIM_INFINITY &&
p->p_runtime.sec > p->p_cpulimit) {
p->p_sflag |= PS_XCPU;
ke->ke_flags |= KEF_ASTPENDING;
}
/*
* Finish up stats for outgoing thread.
*/
cnt.v_swtch++;
PCPU_SET(switchtime, new_switchtime);
CTR3(KTR_PROC, "mi_switch: old thread %p (pid %d, %s)", td, p->p_pid,
p->p_comm);
sched_nest = sched_lock.mtx_recurse;
sched_switchout(td);
cpu_switch(); /* SHAZAM!!*/
sched_lock.mtx_recurse = sched_nest;
sched_lock.mtx_lock = (uintptr_t)td;
sched_switchin(td);
/*
* Start setting up stats etc. for the incoming thread.
* Similar code in fork_exit() is returned to by cpu_switch()
* in the case of a new thread/process.
*/
CTR3(KTR_PROC, "mi_switch: new thread %p (pid %d, %s)", td, p->p_pid,
p->p_comm);
if (PCPU_GET(switchtime.sec) == 0)
binuptime(PCPU_PTR(switchtime));
PCPU_SET(switchticks, ticks);
/*
* Call the switchin function while still holding the scheduler lock
* (used by the idlezero code and the general page-zeroing code)
*/
if (td->td_switchin)
td->td_switchin();
/*
* If the last thread was exiting, finish cleaning it up.
*/
if ((td = PCPU_GET(deadthread))) {
PCPU_SET(deadthread, NULL);
thread_stash(td);
}
}
/*
* Change process state to be runnable,
* placing it on the run queue if it is in memory,
* and awakening the swapper if it isn't in memory.
*/
void
setrunnable(struct thread *td)
{
struct proc *p = td->td_proc;
mtx_assert(&sched_lock, MA_OWNED);
switch (p->p_state) {
case PRS_ZOMBIE:
panic("setrunnable(1)");
default:
break;
}
switch (td->td_state) {
case TDS_RUNNING:
case TDS_RUNQ:
return;
case TDS_INHIBITED:
/*
* If we are only inhibited because we are swapped out
* then arange to swap in this process. Otherwise just return.
*/
if (td->td_inhibitors != TDI_SWAPPED)
return;
case TDS_CAN_RUN:
break;
default:
printf("state is 0x%x", td->td_state);
panic("setrunnable(2)");
}
if ((p->p_sflag & PS_INMEM) == 0) {
if ((p->p_sflag & PS_SWAPPINGIN) == 0) {
p->p_sflag |= PS_SWAPINREQ;
wakeup(&proc0);
}
} else
sched_wakeup(td);
}
/*
* Compute a tenex style load average of a quantity on
* 1, 5 and 15 minute intervals.
* XXXKSE Needs complete rewrite when correct info is available.
* Completely Bogus.. only works with 1:1 (but compiles ok now :-)
*/
static void
loadav(void *arg)
{
int i, nrun;
struct loadavg *avg;
struct proc *p;
struct thread *td;
avg = &averunnable;
sx_slock(&allproc_lock);
nrun = 0;
FOREACH_PROC_IN_SYSTEM(p) {
FOREACH_THREAD_IN_PROC(p, td) {
switch (td->td_state) {
case TDS_RUNQ:
case TDS_RUNNING:
if ((p->p_flag & P_NOLOAD) != 0)
goto nextproc;
nrun++; /* XXXKSE */
default:
break;
}
nextproc:
continue;
}
}
sx_sunlock(&allproc_lock);
for (i = 0; i < 3; i++)
avg->ldavg[i] = (cexp[i] * avg->ldavg[i] +
nrun * FSCALE * (FSCALE - cexp[i])) >> FSHIFT;
/*
* Schedule the next update to occur after 5 seconds, but add a
* random variation to avoid synchronisation with processes that
* run at regular intervals.
*/
callout_reset(&loadav_callout, hz * 4 + (int)(random() % (hz * 2 + 1)),
loadav, NULL);
}
static void
lboltcb(void *arg)
{
wakeup(&lbolt);
callout_reset(&lbolt_callout, hz, lboltcb, NULL);
}
/* ARGSUSED */
static void
sched_setup(dummy)
void *dummy;
{
callout_init(&loadav_callout, 0);
callout_init(&lbolt_callout, 1);
/* Kick off timeout driven events by calling first time. */
loadav(NULL);
lboltcb(NULL);
}
/*
* General purpose yield system call
*/
int
yield(struct thread *td, struct yield_args *uap)
{
struct ksegrp *kg = td->td_ksegrp;
mtx_assert(&Giant, MA_NOTOWNED);
mtx_lock_spin(&sched_lock);
kg->kg_proc->p_stats->p_ru.ru_nvcsw++;
sched_prio(td, PRI_MAX_TIMESHARE);
mi_switch();
mtx_unlock_spin(&sched_lock);
td->td_retval[0] = 0;
return (0);
}