freebsd-nq/sys/i386/include/vmparam.h
1994-09-01 03:16:40 +00:00

239 lines
8.1 KiB
C

/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 1994 John S. Dyson
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)vmparam.h 5.9 (Berkeley) 5/12/91
* $Id: vmparam.h,v 1.13 1994/05/25 08:57:22 rgrimes Exp $
*/
#ifndef _MACHINE_VMPARAM_H_
#define _MACHINE_VMPARAM_H_ 1
/*
* Machine dependent constants for 386.
*/
/*
* Virtual address space arrangement. On 386, both user and kernel
* share the address space, not unlike the vax.
* USRTEXT is the start of the user text/data space, while USRSTACK
* is the top (end) of the user stack. Immediately above the user stack
* resides the user structure, which is UPAGES long and contains the
* kernel stack.
*
* Immediately after the user structure is the page table map, and then
* kernal address space.
*/
#define USRTEXT 0UL
/* #define USRSTACK 0xFDBFE000UL */
#define BTOPUSRSTACK (0xFDC00-(UPAGES)) /* btop(USRSTACK) */
#define LOWPAGES 0UL
#define HIGHPAGES UPAGES
/*
* Virtual memory related constants, all in bytes
*/
#define MAXTSIZ (16UL*1024*1024) /* max text size */
#ifndef DFLDSIZ
#define DFLDSIZ (64UL*1024*1024) /* initial data size limit */
#endif
#ifndef MAXDSIZ
#define MAXDSIZ (128UL*1024*1024) /* max data size */
#endif
#ifndef DFLSSIZ
#define DFLSSIZ (8UL*1024*1024) /* initial stack size limit */
#endif
#ifndef MAXSSIZ
#define MAXSSIZ (64UL*1024*1024) /* max stack size */
#endif
#ifndef SGROWSIZ
#define SGROWSIZ (128UL*1024) /* amount to grow stack */
#endif
/*
* Default sizes of swap allocation chunks (see dmap.h).
* The actual values may be changed in vminit() based on MAXDSIZ.
* With MAXDSIZ of 16Mb and NDMAP of 38, dmmax will be 1024.
*/
#define DMMIN 32 /* smallest swap allocation */
#define DMMAX 4096 /* largest potential swap allocation */
#define DMTEXT 1024 /* swap allocation for text */
/*
* Sizes of the system and user portions of the system page table.
*/
#define SYSPTSIZE (2*NPTEPG)
#define USRPTSIZE (2*NPTEPG)
/*
* Size of the Shared Memory Pages page table.
*/
#ifndef SHMMAXPGS
#define SHMMAXPGS 512 /* XXX until we have more kmap space */
#endif
/*
* Size of User Raw I/O map
*/
#define USRIOSIZE 1024
/*
* The size of the clock loop.
*/
#define LOOPPAGES (maxfree - firstfree)
/*
* The time for a process to be blocked before being very swappable.
* This is a number of seconds which the system takes as being a non-trivial
* amount of real time. You probably shouldn't change this;
* it is used in subtle ways (fractions and multiples of it are, that is, like
* half of a ``long time'', almost a long time, etc.)
* It is related to human patience and other factors which don't really
* change over time.
*/
#define MAXSLP 20
/*
* A swapped in process is given a small amount of core without being bothered
* by the page replacement algorithm. Basically this says that if you are
* swapped in you deserve some resources. We protect the last SAFERSS
* pages against paging and will just swap you out rather than paging you.
* Note that each process has at least UPAGES+CLSIZE pages which are not
* paged anyways (this is currently 8+2=10 pages or 5k bytes), so this
* number just means a swapped in process is given around 25k bytes.
* Just for fun: current memory prices are 4600$ a megabyte on VAX (4/22/81),
* so we loan each swapped in process memory worth 100$, or just admit
* that we don't consider it worthwhile and swap it out to disk which costs
* $30/mb or about $0.75.
* { wfj 6/16/89: Retail AT memory expansion $800/megabyte, loan of $17
* on disk costing $7/mb or $0.18 (in memory still 100:1 in cost!) }
*/
#define SAFERSS 8 /* nominal ``small'' resident set size
protected against replacement */
/*
* DISKRPM is used to estimate the number of paging i/o operations
* which one can expect from a single disk controller.
*/
#define DISKRPM 60
/*
* Klustering constants. Klustering is the gathering
* of pages together for pagein/pageout, while clustering
* is the treatment of hardware page size as though it were
* larger than it really is.
*
* KLMAX gives maximum cluster size in CLSIZE page (cluster-page)
* units. Note that KLMAX*CLSIZE must be <= DMMIN in dmap.h.
*/
#define KLMAX (4/CLSIZE)
#define KLSEQL (2/CLSIZE) /* in klust if vadvise(VA_SEQL) */
#define KLIN (4/CLSIZE) /* default data/stack in klust */
#define KLTXT (4/CLSIZE) /* default text in klust */
#define KLOUT (4/CLSIZE)
/*
* KLSDIST is the advance or retard of the fifo reclaim for sequential
* processes data space.
*/
#define KLSDIST 3 /* klusters advance/retard for seq. fifo */
/*
* There are two clock hands, initially separated by HANDSPREAD bytes
* (but at most all of user memory). The amount of time to reclaim
* a page once the pageout process examines it increases with this
* distance and decreases as the scan rate rises.
*/
#define HANDSPREAD (2 * 1024 * 1024)
/*
* The number of times per second to recompute the desired paging rate
* and poke the pagedaemon.
*/
#define RATETOSCHEDPAGING 4
/*
* Believed threshold (in megabytes) for which interleaved
* swapping area is desirable.
*/
#define LOTSOFMEM 2
#define mapin(pte, v, pfnum, prot) \
{(*(int *)(pte) = ((pfnum)<<PGSHIFT) | (prot)) ; }
/*
* Mach derived constants
*/
/* user/kernel map constants */
#define KERNBASE (0-(NKPDE+1)*(NBPG*NPTEPG))
#define KERNSIZE (NKPDE*NBPG*NPTEPG)
#define VM_MIN_ADDRESS ((vm_offset_t)0)
#define VM_MAXUSER_ADDRESS ((vm_offset_t)KERNBASE - (NBPG*(NPTEPG+UPAGES)))
#define USRSTACK VM_MAXUSER_ADDRESS
#define UPT_MIN_ADDRESS ((vm_offset_t)KERNBASE - (NBPG*NPTEPG))
#define UPT_MAX_ADDRESS ((vm_offset_t)KERNBASE - (NBPG*(NKPDE+2)))
#define VM_MAX_ADDRESS UPT_MAX_ADDRESS
#define VM_MIN_KERNEL_ADDRESS ((vm_offset_t)KERNBASE - (NBPG*(NKPDE+2)))
#define UPDT VM_MIN_KERNEL_ADDRESS
#define KPT_MIN_ADDRESS ((vm_offset_t)(KERNBASE) - (NBPG*(NKPDE+1)))
#define KPT_MAX_ADDRESS ((vm_offset_t)(KERNBASE) - NBPG)
#define VM_MAX_KERNEL_ADDRESS ((vm_offset_t)ALT_MIN_ADDRESS - NBPG)
#define ALT_MIN_ADDRESS ((vm_offset_t)((APTDPTDI) << 22))
#define HIGHPAGES UPAGES
/* virtual sizes (bytes) for various kernel submaps */
#define VM_MBUF_SIZE (NMBCLUSTERS*MCLBYTES)
#define VM_KMEM_SIZE (16 * 1024 * 1024)
#define VM_PHYS_SIZE (USRIOSIZE*CLBYTES)
/* pcb base */
#define pcbb(p) ((u_int)(p)->p_addr)
/*
* Flush MMU TLB
*/
#ifndef I386_CR3PAT
#define I386_CR3PAT 0x0
#endif
#endif /* _MACHINE_VMPARAM_H_ */