freebsd-nq/sys/dev/oce/oce_hw.c
Matt Macy d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00

598 lines
14 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 2013 Emulex
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the Emulex Corporation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* Contact Information:
* freebsd-drivers@emulex.com
*
* Emulex
* 3333 Susan Street
* Costa Mesa, CA 92626
*/
/* $FreeBSD$ */
#include "oce_if.h"
static int oce_POST(POCE_SOFTC sc);
/**
* @brief Function to post status
* @param sc software handle to the device
*/
static int
oce_POST(POCE_SOFTC sc)
{
mpu_ep_semaphore_t post_status;
int tmo = 60000;
/* read semaphore CSR */
post_status.dw0 = OCE_READ_CSR_MPU(sc, csr, MPU_EP_SEMAPHORE(sc));
/* if host is ready then wait for fw ready else send POST */
if (post_status.bits.stage <= POST_STAGE_AWAITING_HOST_RDY) {
post_status.bits.stage = POST_STAGE_CHIP_RESET;
OCE_WRITE_CSR_MPU(sc, csr, MPU_EP_SEMAPHORE(sc), post_status.dw0);
}
/* wait for FW ready */
for (;;) {
if (--tmo == 0)
break;
DELAY(1000);
post_status.dw0 = OCE_READ_CSR_MPU(sc, csr, MPU_EP_SEMAPHORE(sc));
if (post_status.bits.error) {
device_printf(sc->dev,
"POST failed: %x\n", post_status.dw0);
return ENXIO;
}
if (post_status.bits.stage == POST_STAGE_ARMFW_READY)
return 0;
}
device_printf(sc->dev, "POST timed out: %x\n", post_status.dw0);
return ENXIO;
}
/**
* @brief Function for hardware initialization
* @param sc software handle to the device
*/
int
oce_hw_init(POCE_SOFTC sc)
{
int rc = 0;
rc = oce_POST(sc);
if (rc)
return rc;
/* create the bootstrap mailbox */
rc = oce_dma_alloc(sc, sizeof(struct oce_bmbx), &sc->bsmbx, 0);
if (rc) {
device_printf(sc->dev, "Mailbox alloc failed\n");
return rc;
}
rc = oce_reset_fun(sc);
if (rc)
goto error;
rc = oce_mbox_init(sc);
if (rc)
goto error;
rc = oce_get_fw_version(sc);
if (rc)
goto error;
rc = oce_get_fw_config(sc);
if (rc)
goto error;
sc->macaddr.size_of_struct = 6;
rc = oce_read_mac_addr(sc, 0, 1, MAC_ADDRESS_TYPE_NETWORK,
&sc->macaddr);
if (rc)
goto error;
if ((IS_BE(sc) && (sc->flags & OCE_FLAGS_BE3)) || IS_SH(sc)) {
rc = oce_mbox_check_native_mode(sc);
if (rc)
goto error;
} else
sc->be3_native = 0;
return rc;
error:
oce_dma_free(sc, &sc->bsmbx);
device_printf(sc->dev, "Hardware initialisation failed\n");
return rc;
}
/**
* @brief Releases the obtained pci resources
* @param sc software handle to the device
*/
void
oce_hw_pci_free(POCE_SOFTC sc)
{
int pci_cfg_barnum = 0;
if (IS_BE(sc) && (sc->flags & OCE_FLAGS_BE2))
pci_cfg_barnum = OCE_DEV_BE2_CFG_BAR;
else
pci_cfg_barnum = OCE_DEV_CFG_BAR;
if (sc->devcfg_res != NULL) {
bus_release_resource(sc->dev,
SYS_RES_MEMORY,
PCIR_BAR(pci_cfg_barnum), sc->devcfg_res);
sc->devcfg_res = (struct resource *)NULL;
sc->devcfg_btag = (bus_space_tag_t) 0;
sc->devcfg_bhandle = (bus_space_handle_t)0;
sc->devcfg_vhandle = (void *)NULL;
}
if (sc->csr_res != NULL) {
bus_release_resource(sc->dev,
SYS_RES_MEMORY,
PCIR_BAR(OCE_PCI_CSR_BAR), sc->csr_res);
sc->csr_res = (struct resource *)NULL;
sc->csr_btag = (bus_space_tag_t)0;
sc->csr_bhandle = (bus_space_handle_t)0;
sc->csr_vhandle = (void *)NULL;
}
if (sc->db_res != NULL) {
bus_release_resource(sc->dev,
SYS_RES_MEMORY,
PCIR_BAR(OCE_PCI_DB_BAR), sc->db_res);
sc->db_res = (struct resource *)NULL;
sc->db_btag = (bus_space_tag_t)0;
sc->db_bhandle = (bus_space_handle_t)0;
sc->db_vhandle = (void *)NULL;
}
}
/**
* @brief Function to get the PCI capabilities
* @param sc software handle to the device
*/
static
void oce_get_pci_capabilities(POCE_SOFTC sc)
{
uint32_t val;
#if __FreeBSD_version >= 1000000
#define pci_find_extcap pci_find_cap
#endif
if (pci_find_extcap(sc->dev, PCIY_PCIX, &val) == 0) {
if (val != 0)
sc->flags |= OCE_FLAGS_PCIX;
}
if (pci_find_extcap(sc->dev, PCIY_EXPRESS, &val) == 0) {
if (val != 0) {
uint16_t link_status =
pci_read_config(sc->dev, val + 0x12, 2);
sc->flags |= OCE_FLAGS_PCIE;
sc->pcie_link_speed = link_status & 0xf;
sc->pcie_link_width = (link_status >> 4) & 0x3f;
}
}
if (pci_find_extcap(sc->dev, PCIY_MSI, &val) == 0) {
if (val != 0)
sc->flags |= OCE_FLAGS_MSI_CAPABLE;
}
if (pci_find_extcap(sc->dev, PCIY_MSIX, &val) == 0) {
if (val != 0) {
val = pci_msix_count(sc->dev);
sc->flags |= OCE_FLAGS_MSIX_CAPABLE;
}
}
}
/**
* @brief Allocate PCI resources.
*
* @param sc software handle to the device
* @returns 0 if successful, or error
*/
int
oce_hw_pci_alloc(POCE_SOFTC sc)
{
int rr, pci_cfg_barnum = 0;
pci_sli_intf_t intf;
pci_enable_busmaster(sc->dev);
oce_get_pci_capabilities(sc);
sc->fn = pci_get_function(sc->dev);
/* setup the device config region */
if (IS_BE(sc) && (sc->flags & OCE_FLAGS_BE2))
pci_cfg_barnum = OCE_DEV_BE2_CFG_BAR;
else
pci_cfg_barnum = OCE_DEV_CFG_BAR;
rr = PCIR_BAR(pci_cfg_barnum);
if (IS_BE(sc) || IS_SH(sc))
sc->devcfg_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rr,
RF_ACTIVE|RF_SHAREABLE);
else
sc->devcfg_res = bus_alloc_resource_anywhere(sc->dev,
SYS_RES_MEMORY, &rr, 32768,
RF_ACTIVE|RF_SHAREABLE);
if (!sc->devcfg_res)
goto error;
sc->devcfg_btag = rman_get_bustag(sc->devcfg_res);
sc->devcfg_bhandle = rman_get_bushandle(sc->devcfg_res);
sc->devcfg_vhandle = rman_get_virtual(sc->devcfg_res);
/* Read the SLI_INTF register and determine whether we
* can use this port and its features
*/
intf.dw0 = pci_read_config((sc)->dev,OCE_INTF_REG_OFFSET,4);
if (intf.bits.sli_valid != OCE_INTF_VALID_SIG)
goto error;
if (intf.bits.sli_rev != OCE_INTF_SLI_REV4) {
device_printf(sc->dev, "Adapter doesnt support SLI4\n");
goto error;
}
if (intf.bits.sli_if_type == OCE_INTF_IF_TYPE_1)
sc->flags |= OCE_FLAGS_MBOX_ENDIAN_RQD;
if (intf.bits.sli_hint1 == OCE_INTF_FUNC_RESET_REQD)
sc->flags |= OCE_FLAGS_FUNCRESET_RQD;
if (intf.bits.sli_func_type == OCE_INTF_VIRT_FUNC)
sc->flags |= OCE_FLAGS_VIRTUAL_PORT;
/* Lancer has one BAR (CFG) but BE3 has three (CFG, CSR, DB) */
if (IS_BE(sc) || IS_SH(sc)) {
/* set up CSR region */
rr = PCIR_BAR(OCE_PCI_CSR_BAR);
sc->csr_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rr, RF_ACTIVE|RF_SHAREABLE);
if (!sc->csr_res)
goto error;
sc->csr_btag = rman_get_bustag(sc->csr_res);
sc->csr_bhandle = rman_get_bushandle(sc->csr_res);
sc->csr_vhandle = rman_get_virtual(sc->csr_res);
/* set up DB doorbell region */
rr = PCIR_BAR(OCE_PCI_DB_BAR);
sc->db_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rr, RF_ACTIVE|RF_SHAREABLE);
if (!sc->db_res)
goto error;
sc->db_btag = rman_get_bustag(sc->db_res);
sc->db_bhandle = rman_get_bushandle(sc->db_res);
sc->db_vhandle = rman_get_virtual(sc->db_res);
}
return 0;
error:
oce_hw_pci_free(sc);
return ENXIO;
}
/**
* @brief Function for device shutdown
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
void
oce_hw_shutdown(POCE_SOFTC sc)
{
oce_stats_free(sc);
/* disable hardware interrupts */
oce_hw_intr_disable(sc);
#if defined(INET6) || defined(INET)
/* Free LRO resources */
oce_free_lro(sc);
#endif
/* Release queue*/
oce_queue_release_all(sc);
/*Delete Network Interface*/
oce_delete_nw_interface(sc);
/* After fw clean we dont send any cmds to fw.*/
oce_fw_clean(sc);
/* release intr resources */
oce_intr_free(sc);
/* release PCI resources */
oce_hw_pci_free(sc);
/* free mbox specific resources */
LOCK_DESTROY(&sc->bmbx_lock);
LOCK_DESTROY(&sc->dev_lock);
oce_dma_free(sc, &sc->bsmbx);
}
/**
* @brief Function for creating nw interface.
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
int
oce_create_nw_interface(POCE_SOFTC sc)
{
int rc;
uint32_t capab_flags;
uint32_t capab_en_flags;
/* interface capabilities to give device when creating interface */
capab_flags = OCE_CAPAB_FLAGS;
/* capabilities to enable by default (others set dynamically) */
capab_en_flags = OCE_CAPAB_ENABLE;
if (IS_XE201(sc)) {
/* LANCER A0 workaround */
capab_en_flags &= ~MBX_RX_IFACE_FLAGS_PASS_L3L4_ERR;
capab_flags &= ~MBX_RX_IFACE_FLAGS_PASS_L3L4_ERR;
}
if (IS_SH(sc) || IS_XE201(sc))
capab_flags |= MBX_RX_IFACE_FLAGS_MULTICAST;
if (sc->enable_hwlro) {
capab_flags |= MBX_RX_IFACE_FLAGS_LRO;
capab_en_flags |= MBX_RX_IFACE_FLAGS_LRO;
}
/* enable capabilities controlled via driver startup parameters */
if (is_rss_enabled(sc))
capab_en_flags |= MBX_RX_IFACE_FLAGS_RSS;
else {
capab_en_flags &= ~MBX_RX_IFACE_FLAGS_RSS;
capab_flags &= ~MBX_RX_IFACE_FLAGS_RSS;
}
rc = oce_if_create(sc,
capab_flags,
capab_en_flags,
0, &sc->macaddr.mac_addr[0], &sc->if_id);
if (rc)
return rc;
atomic_inc_32(&sc->nifs);
sc->if_cap_flags = capab_en_flags;
/* set default flow control */
rc = oce_set_flow_control(sc, sc->flow_control);
if (rc)
goto error;
rc = oce_rxf_set_promiscuous(sc, sc->promisc);
if (rc)
goto error;
return rc;
error:
oce_delete_nw_interface(sc);
return rc;
}
/**
* @brief Function to delete a nw interface.
* @param sc software handle to the device
*/
void
oce_delete_nw_interface(POCE_SOFTC sc)
{
/* currently only single interface is implmeneted */
if (sc->nifs > 0) {
oce_if_del(sc, sc->if_id);
atomic_dec_32(&sc->nifs);
}
}
/**
* @brief Soft reset.
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
int
oce_pci_soft_reset(POCE_SOFTC sc)
{
int rc;
mpu_ep_control_t ctrl;
ctrl.dw0 = OCE_READ_CSR_MPU(sc, csr, MPU_EP_CONTROL);
ctrl.bits.cpu_reset = 1;
OCE_WRITE_CSR_MPU(sc, csr, MPU_EP_CONTROL, ctrl.dw0);
DELAY(50);
rc=oce_POST(sc);
return rc;
}
/**
* @brief Function for hardware start
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
int
oce_hw_start(POCE_SOFTC sc)
{
struct link_status link = { 0 };
int rc = 0;
rc = oce_get_link_status(sc, &link);
if (rc)
return 1;
if (link.logical_link_status == NTWK_LOGICAL_LINK_UP) {
sc->link_status = NTWK_LOGICAL_LINK_UP;
if_link_state_change(sc->ifp, LINK_STATE_UP);
} else {
sc->link_status = NTWK_LOGICAL_LINK_DOWN;
if_link_state_change(sc->ifp, LINK_STATE_DOWN);
}
sc->link_speed = link.phys_port_speed;
sc->qos_link_speed = (uint32_t )link.qos_link_speed * 10;
rc = oce_start_mq(sc->mq);
/* we need to get MCC aync events. So enable intrs and arm
first EQ, Other EQs will be armed after interface is UP
*/
oce_hw_intr_enable(sc);
oce_arm_eq(sc, sc->eq[0]->eq_id, 0, TRUE, FALSE);
/* Send first mcc cmd and after that we get gracious
MCC notifications from FW
*/
oce_first_mcc_cmd(sc);
return rc;
}
/**
* @brief Function for hardware enable interupts.
* @param sc software handle to the device
*/
void
oce_hw_intr_enable(POCE_SOFTC sc)
{
uint32_t reg;
reg = OCE_READ_REG32(sc, devcfg, PCICFG_INTR_CTRL);
reg |= HOSTINTR_MASK;
OCE_WRITE_REG32(sc, devcfg, PCICFG_INTR_CTRL, reg);
}
/**
* @brief Function for hardware disable interupts
* @param sc software handle to the device
*/
void
oce_hw_intr_disable(POCE_SOFTC sc)
{
uint32_t reg;
reg = OCE_READ_REG32(sc, devcfg, PCICFG_INTR_CTRL);
reg &= ~HOSTINTR_MASK;
OCE_WRITE_REG32(sc, devcfg, PCICFG_INTR_CTRL, reg);
}
/**
* @brief Function for hardware update multicast filter
* @param sc software handle to the device
*/
int
oce_hw_update_multicast(POCE_SOFTC sc)
{
struct ifnet *ifp = sc->ifp;
struct ifmultiaddr *ifma;
struct mbx_set_common_iface_multicast *req = NULL;
OCE_DMA_MEM dma;
int rc = 0;
/* Allocate DMA mem*/
if (oce_dma_alloc(sc, sizeof(struct mbx_set_common_iface_multicast),
&dma, 0))
return ENOMEM;
req = OCE_DMAPTR(&dma, struct mbx_set_common_iface_multicast);
bzero(req, sizeof(struct mbx_set_common_iface_multicast));
#if __FreeBSD_version > 800000
if_maddr_rlock(ifp);
#endif
CK_STAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
if (req->params.req.num_mac == OCE_MAX_MC_FILTER_SIZE) {
/*More multicast addresses than our hardware table
So Enable multicast promiscus in our hardware to
accept all multicat packets
*/
req->params.req.promiscuous = 1;
break;
}
bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
&req->params.req.mac[req->params.req.num_mac],
ETH_ADDR_LEN);
req->params.req.num_mac = req->params.req.num_mac + 1;
}
#if __FreeBSD_version > 800000
if_maddr_runlock(ifp);
#endif
req->params.req.if_id = sc->if_id;
rc = oce_update_multicast(sc, &dma);
oce_dma_free(sc, &dma);
return rc;
}