freebsd-nq/sys/net80211/ieee80211_input.c
Adrian Chadd c79f192c09 Begin plumbing ieee80211_rx_stats through the receive path.
Smart NICs with firmware (eg wpi, iwn, the new atheros parts, the intel 7260
series, etc) support doing a lot of things in firmware.  This includes but
isn't limited to things like scanning, sending probe requests and receiving
probe responses.  However, net80211 doesn't know about any of this - it still
drives the whole scan/probe infrastructure itself.

In order to move towards suppoting smart NICs, the receive path needs to
know about the channel/details for each received packet.  In at least
the iwn and 7260 firmware (and I believe wpi, but I haven't tried it yet)
it will do the scanning, power-save and off-channel buffering for you -
all you need to do is handle receiving beacons and probe responses on
channels that aren't what you're currently on.  However the whole receive
path is peppered with ic->ic_curchan and manual scan/powersave handling.
The beacon parsing code also checks ic->ic_curchan to determine if the
received beacon is on the correct channel or not.[1]

So:

* add freq/ieee values to ieee80211_rx_stats;
* change ieee80211_parse_beacon() to accept the 'current' channel
  as an argument;
* modify the iv_input() and iv_recv_mgmt() methods to include the rx_stats;
* add a new method - ieee80211_lookup_channel_rxstats() - that looks up
  a channel based on the contents of ieee80211_rx_stats;
* if it exists, use it in the mgmt path to switch the current channel
  (which still defaults to ic->ic_curchan) over to something determined
  by rx_stats.

This is enough to kick-start scan offload support in the Intel 7260
driver that Rui/I are working on.  It also is a good start for scan
offload support for a handful of existing NICs (wpi, iwn, some USB
parts) and it'll very likely dramatically improve stability/performance
there.  It's not the whole thing - notably, we don't need to do powersave,
we should not scan all channels, and we should leave probe request sending
to the firmware and not do it ourselves.  But, this allows for continued
development on the above features whilst actually having a somewhat
working NIC.

TODO:

* Finish tidying up how the net80211 input path works.
  Right now ieee80211_input / ieee80211_input_all act as the top-level
  that everything feeds into; it should change so the MIMO input routines
  are those and the legacy routines are phased out.

* The band selection should be done by the driver, not by the net80211
  layer.

* ieee80211_lookup_channel_rxstats() only determines 11b or 11g channels
  for now - this is enough for scanning, but not 100% true in all cases.
  If we ever need to handle off-channel scan support for things like
  static-40MHz or static-80MHz, or turbo-G, or half/quarter rates,
  then we should extend this.

[1] This is a side effect of frequency-hopping and CCK modes - you
    can receive beacons when you think you're on a different channel.
    In particular, CCK (which is used by the low 11b rates, eg beacons!)
    is decodable from adjacent channels - just at a low SNR.
    FH is a side effect of having the hardware/firmware do the frequency
    hopping - it may pick up beacons transmitted from other FH networks
    that are in a different phase of hopping frequencies.
2015-05-25 16:37:41 +00:00

960 lines
27 KiB
C

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_llc.h>
#include <net/if_media.h>
#include <net/if_vlan_var.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_input.h>
#ifdef IEEE80211_SUPPORT_MESH
#include <net80211/ieee80211_mesh.h>
#endif
#include <net/bpf.h>
#ifdef INET
#include <netinet/in.h>
#include <net/ethernet.h>
#endif
static void
ieee80211_process_mimo(struct ieee80211_node *ni, struct ieee80211_rx_stats *rx)
{
int i;
/* Verify the required MIMO bits are set */
if ((rx->r_flags & (IEEE80211_R_C_CHAIN | IEEE80211_R_C_NF | IEEE80211_R_C_RSSI)) !=
(IEEE80211_R_C_CHAIN | IEEE80211_R_C_NF | IEEE80211_R_C_RSSI))
return;
/* XXX This assumes the MIMO radios have both ctl and ext chains */
for (i = 0; i < MIN(rx->c_chain, IEEE80211_MAX_CHAINS); i++) {
IEEE80211_RSSI_LPF(ni->ni_mimo_rssi_ctl[i], rx->c_rssi_ctl[i]);
IEEE80211_RSSI_LPF(ni->ni_mimo_rssi_ext[i], rx->c_rssi_ext[i]);
}
/* XXX This also assumes the MIMO radios have both ctl and ext chains */
for(i = 0; i < MIN(rx->c_chain, IEEE80211_MAX_CHAINS); i++) {
ni->ni_mimo_noise_ctl[i] = rx->c_nf_ctl[i];
ni->ni_mimo_noise_ext[i] = rx->c_nf_ext[i];
}
ni->ni_mimo_chains = rx->c_chain;
}
int
ieee80211_input_mimo(struct ieee80211_node *ni, struct mbuf *m,
struct ieee80211_rx_stats *rx)
{
/* XXX should assert IEEE80211_R_NF and IEEE80211_R_RSSI are set */
ieee80211_process_mimo(ni, rx);
//return ieee80211_input(ni, m, rx->rssi, rx->nf);
return ni->ni_vap->iv_input(ni, m, rx, rx->rssi, rx->nf);
}
int
ieee80211_input_all(struct ieee80211com *ic, struct mbuf *m, int rssi, int nf)
{
struct ieee80211_rx_stats rx;
rx.r_flags = IEEE80211_R_NF | IEEE80211_R_RSSI;
rx.nf = nf;
rx.rssi = rssi;
return ieee80211_input_mimo_all(ic, m, &rx);
}
int
ieee80211_input_mimo_all(struct ieee80211com *ic, struct mbuf *m,
struct ieee80211_rx_stats *rx)
{
struct ieee80211vap *vap;
int type = -1;
m->m_flags |= M_BCAST; /* NB: mark for bpf tap'ing */
/* XXX locking */
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
struct ieee80211_node *ni;
struct mbuf *mcopy;
/* NB: could check for IFF_UP but this is cheaper */
if (vap->iv_state == IEEE80211_S_INIT)
continue;
/*
* WDS vap's only receive directed traffic from the
* station at the ``far end''. That traffic should
* be passed through the AP vap the station is associated
* to--so don't spam them with mcast frames.
*/
if (vap->iv_opmode == IEEE80211_M_WDS)
continue;
if (TAILQ_NEXT(vap, iv_next) != NULL) {
/*
* Packet contents are changed by ieee80211_decap
* so do a deep copy of the packet.
*/
mcopy = m_dup(m, M_NOWAIT);
if (mcopy == NULL) {
/* XXX stat+msg */
continue;
}
} else {
mcopy = m;
m = NULL;
}
ni = ieee80211_ref_node(vap->iv_bss);
type = ieee80211_input_mimo(ni, mcopy, rx);
ieee80211_free_node(ni);
}
if (m != NULL) /* no vaps, reclaim mbuf */
m_freem(m);
return type;
}
/*
* This function reassembles fragments.
*
* XXX should handle 3 concurrent reassemblies per-spec.
*/
struct mbuf *
ieee80211_defrag(struct ieee80211_node *ni, struct mbuf *m, int hdrspace)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *);
struct ieee80211_frame *lwh;
uint16_t rxseq;
uint8_t fragno;
uint8_t more_frag = wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG;
struct mbuf *mfrag;
KASSERT(!IEEE80211_IS_MULTICAST(wh->i_addr1), ("multicast fragm?"));
rxseq = le16toh(*(uint16_t *)wh->i_seq);
fragno = rxseq & IEEE80211_SEQ_FRAG_MASK;
/* Quick way out, if there's nothing to defragment */
if (!more_frag && fragno == 0 && ni->ni_rxfrag[0] == NULL)
return m;
/*
* Remove frag to insure it doesn't get reaped by timer.
*/
if (ni->ni_table == NULL) {
/*
* Should never happen. If the node is orphaned (not in
* the table) then input packets should not reach here.
* Otherwise, a concurrent request that yanks the table
* should be blocked by other interlocking and/or by first
* shutting the driver down. Regardless, be defensive
* here and just bail
*/
/* XXX need msg+stat */
m_freem(m);
return NULL;
}
IEEE80211_NODE_LOCK(ni->ni_table);
mfrag = ni->ni_rxfrag[0];
ni->ni_rxfrag[0] = NULL;
IEEE80211_NODE_UNLOCK(ni->ni_table);
/*
* Validate new fragment is in order and
* related to the previous ones.
*/
if (mfrag != NULL) {
uint16_t last_rxseq;
lwh = mtod(mfrag, struct ieee80211_frame *);
last_rxseq = le16toh(*(uint16_t *)lwh->i_seq);
/* NB: check seq # and frag together */
if (rxseq != last_rxseq+1 ||
!IEEE80211_ADDR_EQ(wh->i_addr1, lwh->i_addr1) ||
!IEEE80211_ADDR_EQ(wh->i_addr2, lwh->i_addr2)) {
/*
* Unrelated fragment or no space for it,
* clear current fragments.
*/
m_freem(mfrag);
mfrag = NULL;
}
}
if (mfrag == NULL) {
if (fragno != 0) { /* !first fragment, discard */
vap->iv_stats.is_rx_defrag++;
IEEE80211_NODE_STAT(ni, rx_defrag);
m_freem(m);
return NULL;
}
mfrag = m;
} else { /* concatenate */
m_adj(m, hdrspace); /* strip header */
m_cat(mfrag, m);
/* NB: m_cat doesn't update the packet header */
mfrag->m_pkthdr.len += m->m_pkthdr.len;
/* track last seqnum and fragno */
lwh = mtod(mfrag, struct ieee80211_frame *);
*(uint16_t *) lwh->i_seq = *(uint16_t *) wh->i_seq;
}
if (more_frag) { /* more to come, save */
ni->ni_rxfragstamp = ticks;
ni->ni_rxfrag[0] = mfrag;
mfrag = NULL;
}
return mfrag;
}
void
ieee80211_deliver_data(struct ieee80211vap *vap,
struct ieee80211_node *ni, struct mbuf *m)
{
struct ether_header *eh = mtod(m, struct ether_header *);
struct ifnet *ifp = vap->iv_ifp;
/* clear driver/net80211 flags before passing up */
m->m_flags &= ~(M_MCAST | M_BCAST);
#if __FreeBSD_version >= 1000046
m_clrprotoflags(m);
#endif
/* NB: see hostap_deliver_data, this path doesn't handle hostap */
KASSERT(vap->iv_opmode != IEEE80211_M_HOSTAP, ("gack, hostap"));
/*
* Do accounting.
*/
if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1);
IEEE80211_NODE_STAT(ni, rx_data);
IEEE80211_NODE_STAT_ADD(ni, rx_bytes, m->m_pkthdr.len);
if (ETHER_IS_MULTICAST(eh->ether_dhost)) {
m->m_flags |= M_MCAST; /* XXX M_BCAST? */
IEEE80211_NODE_STAT(ni, rx_mcast);
} else
IEEE80211_NODE_STAT(ni, rx_ucast);
m->m_pkthdr.rcvif = ifp;
if (ni->ni_vlan != 0) {
/* attach vlan tag */
m->m_pkthdr.ether_vtag = ni->ni_vlan;
m->m_flags |= M_VLANTAG;
}
ifp->if_input(ifp, m);
}
struct mbuf *
ieee80211_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen)
{
struct ieee80211_qosframe_addr4 wh;
struct ether_header *eh;
struct llc *llc;
KASSERT(hdrlen <= sizeof(wh),
("hdrlen %d > max %zd", hdrlen, sizeof(wh)));
if (m->m_len < hdrlen + sizeof(*llc) &&
(m = m_pullup(m, hdrlen + sizeof(*llc))) == NULL) {
vap->iv_stats.is_rx_tooshort++;
/* XXX msg */
return NULL;
}
memcpy(&wh, mtod(m, caddr_t), hdrlen);
llc = (struct llc *)(mtod(m, caddr_t) + hdrlen);
if (llc->llc_dsap == LLC_SNAP_LSAP && llc->llc_ssap == LLC_SNAP_LSAP &&
llc->llc_control == LLC_UI && llc->llc_snap.org_code[0] == 0 &&
llc->llc_snap.org_code[1] == 0 && llc->llc_snap.org_code[2] == 0 &&
/* NB: preserve AppleTalk frames that have a native SNAP hdr */
!(llc->llc_snap.ether_type == htons(ETHERTYPE_AARP) ||
llc->llc_snap.ether_type == htons(ETHERTYPE_IPX))) {
m_adj(m, hdrlen + sizeof(struct llc) - sizeof(*eh));
llc = NULL;
} else {
m_adj(m, hdrlen - sizeof(*eh));
}
eh = mtod(m, struct ether_header *);
switch (wh.i_fc[1] & IEEE80211_FC1_DIR_MASK) {
case IEEE80211_FC1_DIR_NODS:
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1);
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2);
break;
case IEEE80211_FC1_DIR_TODS:
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3);
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2);
break;
case IEEE80211_FC1_DIR_FROMDS:
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1);
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr3);
break;
case IEEE80211_FC1_DIR_DSTODS:
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3);
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr4);
break;
}
#ifndef __NO_STRICT_ALIGNMENT
if (!ALIGNED_POINTER(mtod(m, caddr_t) + sizeof(*eh), uint32_t)) {
m = ieee80211_realign(vap, m, sizeof(*eh));
if (m == NULL)
return NULL;
}
#endif /* !__NO_STRICT_ALIGNMENT */
if (llc != NULL) {
eh = mtod(m, struct ether_header *);
eh->ether_type = htons(m->m_pkthdr.len - sizeof(*eh));
}
return m;
}
/*
* Decap a frame encapsulated in a fast-frame/A-MSDU.
*/
struct mbuf *
ieee80211_decap1(struct mbuf *m, int *framelen)
{
#define FF_LLC_SIZE (sizeof(struct ether_header) + sizeof(struct llc))
struct ether_header *eh;
struct llc *llc;
/*
* The frame has an 802.3 header followed by an 802.2
* LLC header. The encapsulated frame length is in the
* first header type field; save that and overwrite it
* with the true type field found in the second. Then
* copy the 802.3 header up to where it belongs and
* adjust the mbuf contents to remove the void.
*/
if (m->m_len < FF_LLC_SIZE && (m = m_pullup(m, FF_LLC_SIZE)) == NULL)
return NULL;
eh = mtod(m, struct ether_header *); /* 802.3 header is first */
llc = (struct llc *)&eh[1]; /* 802.2 header follows */
*framelen = ntohs(eh->ether_type) /* encap'd frame size */
+ sizeof(struct ether_header) - sizeof(struct llc);
eh->ether_type = llc->llc_un.type_snap.ether_type;
ovbcopy(eh, mtod(m, uint8_t *) + sizeof(struct llc),
sizeof(struct ether_header));
m_adj(m, sizeof(struct llc));
return m;
#undef FF_LLC_SIZE
}
/*
* Install received rate set information in the node's state block.
*/
int
ieee80211_setup_rates(struct ieee80211_node *ni,
const uint8_t *rates, const uint8_t *xrates, int flags)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_rateset *rs = &ni->ni_rates;
memset(rs, 0, sizeof(*rs));
rs->rs_nrates = rates[1];
memcpy(rs->rs_rates, rates + 2, rs->rs_nrates);
if (xrates != NULL) {
uint8_t nxrates;
/*
* Tack on 11g extended supported rate element.
*/
nxrates = xrates[1];
if (rs->rs_nrates + nxrates > IEEE80211_RATE_MAXSIZE) {
nxrates = IEEE80211_RATE_MAXSIZE - rs->rs_nrates;
IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE, ni,
"extended rate set too large; only using "
"%u of %u rates", nxrates, xrates[1]);
vap->iv_stats.is_rx_rstoobig++;
}
memcpy(rs->rs_rates + rs->rs_nrates, xrates+2, nxrates);
rs->rs_nrates += nxrates;
}
return ieee80211_fix_rate(ni, rs, flags);
}
/*
* Send a management frame error response to the specified
* station. If ni is associated with the station then use
* it; otherwise allocate a temporary node suitable for
* transmitting the frame and then free the reference so
* it will go away as soon as the frame has been transmitted.
*/
void
ieee80211_send_error(struct ieee80211_node *ni,
const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg)
{
struct ieee80211vap *vap = ni->ni_vap;
int istmp;
if (ni == vap->iv_bss) {
if (vap->iv_state != IEEE80211_S_RUN) {
/*
* XXX hack until we get rid of this routine.
* We can be called prior to the vap reaching
* run state under certain conditions in which
* case iv_bss->ni_chan will not be setup.
* Check for this explicitly and and just ignore
* the request.
*/
return;
}
ni = ieee80211_tmp_node(vap, mac);
if (ni == NULL) {
/* XXX msg */
return;
}
istmp = 1;
} else
istmp = 0;
IEEE80211_SEND_MGMT(ni, subtype, arg);
if (istmp)
ieee80211_free_node(ni);
}
int
ieee80211_alloc_challenge(struct ieee80211_node *ni)
{
if (ni->ni_challenge == NULL)
ni->ni_challenge = (uint32_t *) malloc(IEEE80211_CHALLENGE_LEN,
M_80211_NODE, M_NOWAIT);
if (ni->ni_challenge == NULL) {
IEEE80211_NOTE(ni->ni_vap,
IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni,
"%s", "shared key challenge alloc failed");
/* XXX statistic */
}
return (ni->ni_challenge != NULL);
}
/*
* Parse a Beacon or ProbeResponse frame and return the
* useful information in an ieee80211_scanparams structure.
* Status is set to 0 if no problems were found; otherwise
* a bitmask of IEEE80211_BPARSE_* items is returned that
* describes the problems detected.
*/
int
ieee80211_parse_beacon(struct ieee80211_node *ni, struct mbuf *m,
struct ieee80211_channel *rxchan, struct ieee80211_scanparams *scan)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_frame *wh;
uint8_t *frm, *efrm;
wh = mtod(m, struct ieee80211_frame *);
frm = (uint8_t *)&wh[1];
efrm = mtod(m, uint8_t *) + m->m_len;
scan->status = 0;
/*
* beacon/probe response frame format
* [8] time stamp
* [2] beacon interval
* [2] capability information
* [tlv] ssid
* [tlv] supported rates
* [tlv] country information
* [tlv] channel switch announcement (CSA)
* [tlv] parameter set (FH/DS)
* [tlv] erp information
* [tlv] extended supported rates
* [tlv] WME
* [tlv] WPA or RSN
* [tlv] HT capabilities
* [tlv] HT information
* [tlv] Atheros capabilities
* [tlv] Mesh ID
* [tlv] Mesh Configuration
*/
IEEE80211_VERIFY_LENGTH(efrm - frm, 12,
return (scan->status = IEEE80211_BPARSE_BADIELEN));
memset(scan, 0, sizeof(*scan));
scan->tstamp = frm; frm += 8;
scan->bintval = le16toh(*(uint16_t *)frm); frm += 2;
scan->capinfo = le16toh(*(uint16_t *)frm); frm += 2;
scan->bchan = ieee80211_chan2ieee(ic, rxchan);
scan->chan = scan->bchan;
scan->ies = frm;
scan->ies_len = efrm - frm;
while (efrm - frm > 1) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2,
return (scan->status = IEEE80211_BPARSE_BADIELEN));
switch (*frm) {
case IEEE80211_ELEMID_SSID:
scan->ssid = frm;
break;
case IEEE80211_ELEMID_RATES:
scan->rates = frm;
break;
case IEEE80211_ELEMID_COUNTRY:
scan->country = frm;
break;
case IEEE80211_ELEMID_CSA:
scan->csa = frm;
break;
case IEEE80211_ELEMID_QUIET:
scan->quiet = frm;
break;
case IEEE80211_ELEMID_FHPARMS:
if (ic->ic_phytype == IEEE80211_T_FH) {
scan->fhdwell = LE_READ_2(&frm[2]);
scan->chan = IEEE80211_FH_CHAN(frm[4], frm[5]);
scan->fhindex = frm[6];
}
break;
case IEEE80211_ELEMID_DSPARMS:
/*
* XXX hack this since depending on phytype
* is problematic for multi-mode devices.
*/
if (ic->ic_phytype != IEEE80211_T_FH)
scan->chan = frm[2];
break;
case IEEE80211_ELEMID_TIM:
/* XXX ATIM? */
scan->tim = frm;
scan->timoff = frm - mtod(m, uint8_t *);
break;
case IEEE80211_ELEMID_IBSSPARMS:
case IEEE80211_ELEMID_CFPARMS:
case IEEE80211_ELEMID_PWRCNSTR:
/* NB: avoid debugging complaints */
break;
case IEEE80211_ELEMID_XRATES:
scan->xrates = frm;
break;
case IEEE80211_ELEMID_ERP:
if (frm[1] != 1) {
IEEE80211_DISCARD_IE(vap,
IEEE80211_MSG_ELEMID, wh, "ERP",
"bad len %u", frm[1]);
vap->iv_stats.is_rx_elem_toobig++;
break;
}
scan->erp = frm[2] | 0x100;
break;
case IEEE80211_ELEMID_HTCAP:
scan->htcap = frm;
break;
case IEEE80211_ELEMID_RSN:
scan->rsn = frm;
break;
case IEEE80211_ELEMID_HTINFO:
scan->htinfo = frm;
break;
#ifdef IEEE80211_SUPPORT_MESH
case IEEE80211_ELEMID_MESHID:
scan->meshid = frm;
break;
case IEEE80211_ELEMID_MESHCONF:
scan->meshconf = frm;
break;
#endif
case IEEE80211_ELEMID_VENDOR:
if (iswpaoui(frm))
scan->wpa = frm;
else if (iswmeparam(frm) || iswmeinfo(frm))
scan->wme = frm;
#ifdef IEEE80211_SUPPORT_SUPERG
else if (isatherosoui(frm))
scan->ath = frm;
#endif
#ifdef IEEE80211_SUPPORT_TDMA
else if (istdmaoui(frm))
scan->tdma = frm;
#endif
else if (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) {
/*
* Accept pre-draft HT ie's if the
* standard ones have not been seen.
*/
if (ishtcapoui(frm)) {
if (scan->htcap == NULL)
scan->htcap = frm;
} else if (ishtinfooui(frm)) {
if (scan->htinfo == NULL)
scan->htcap = frm;
}
}
break;
default:
IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID,
wh, "unhandled",
"id %u, len %u", *frm, frm[1]);
vap->iv_stats.is_rx_elem_unknown++;
break;
}
frm += frm[1] + 2;
}
IEEE80211_VERIFY_ELEMENT(scan->rates, IEEE80211_RATE_MAXSIZE,
scan->status |= IEEE80211_BPARSE_RATES_INVALID);
if (scan->rates != NULL && scan->xrates != NULL) {
/*
* NB: don't process XRATES if RATES is missing. This
* avoids a potential null ptr deref and should be ok
* as the return code will already note RATES is missing
* (so callers shouldn't otherwise process the frame).
*/
IEEE80211_VERIFY_ELEMENT(scan->xrates,
IEEE80211_RATE_MAXSIZE - scan->rates[1],
scan->status |= IEEE80211_BPARSE_XRATES_INVALID);
}
IEEE80211_VERIFY_ELEMENT(scan->ssid, IEEE80211_NWID_LEN,
scan->status |= IEEE80211_BPARSE_SSID_INVALID);
if (scan->chan != scan->bchan && ic->ic_phytype != IEEE80211_T_FH) {
/*
* Frame was received on a channel different from the
* one indicated in the DS params element id;
* silently discard it.
*
* NB: this can happen due to signal leakage.
* But we should take it for FH phy because
* the rssi value should be correct even for
* different hop pattern in FH.
*/
IEEE80211_DISCARD(vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT,
wh, NULL, "for off-channel %u (bchan=%u)",
scan->chan, scan->bchan);
vap->iv_stats.is_rx_chanmismatch++;
scan->status |= IEEE80211_BPARSE_OFFCHAN;
}
if (!(IEEE80211_BINTVAL_MIN <= scan->bintval &&
scan->bintval <= IEEE80211_BINTVAL_MAX)) {
IEEE80211_DISCARD(vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT,
wh, NULL, "bogus beacon interval (%d TU)",
(int) scan->bintval);
vap->iv_stats.is_rx_badbintval++;
scan->status |= IEEE80211_BPARSE_BINTVAL_INVALID;
}
if (scan->country != NULL) {
/*
* Validate we have at least enough data to extract
* the country code. Not sure if we should return an
* error instead of discarding the IE; consider this
* being lenient as we don't depend on the data for
* correct operation.
*/
IEEE80211_VERIFY_LENGTH(scan->country[1], 3 * sizeof(uint8_t),
scan->country = NULL);
}
if (scan->csa != NULL) {
/*
* Validate Channel Switch Announcement; this must
* be the correct length or we toss the frame.
*/
IEEE80211_VERIFY_LENGTH(scan->csa[1], 3 * sizeof(uint8_t),
scan->status |= IEEE80211_BPARSE_CSA_INVALID);
}
/*
* Process HT ie's. This is complicated by our
* accepting both the standard ie's and the pre-draft
* vendor OUI ie's that some vendors still use/require.
*/
if (scan->htcap != NULL) {
IEEE80211_VERIFY_LENGTH(scan->htcap[1],
scan->htcap[0] == IEEE80211_ELEMID_VENDOR ?
4 + sizeof(struct ieee80211_ie_htcap)-2 :
sizeof(struct ieee80211_ie_htcap)-2,
scan->htcap = NULL);
}
if (scan->htinfo != NULL) {
IEEE80211_VERIFY_LENGTH(scan->htinfo[1],
scan->htinfo[0] == IEEE80211_ELEMID_VENDOR ?
4 + sizeof(struct ieee80211_ie_htinfo)-2 :
sizeof(struct ieee80211_ie_htinfo)-2,
scan->htinfo = NULL);
}
return scan->status;
}
/*
* Parse an Action frame. Return 0 on success, non-zero on failure.
*/
int
ieee80211_parse_action(struct ieee80211_node *ni, struct mbuf *m)
{
struct ieee80211vap *vap = ni->ni_vap;
const struct ieee80211_action *ia;
struct ieee80211_frame *wh;
uint8_t *frm, *efrm;
/*
* action frame format:
* [1] category
* [1] action
* [tlv] parameters
*/
wh = mtod(m, struct ieee80211_frame *);
frm = (u_int8_t *)&wh[1];
efrm = mtod(m, u_int8_t *) + m->m_len;
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_action), return EINVAL);
ia = (const struct ieee80211_action *) frm;
vap->iv_stats.is_rx_action++;
IEEE80211_NODE_STAT(ni, rx_action);
/* verify frame payloads but defer processing */
switch (ia->ia_category) {
case IEEE80211_ACTION_CAT_BA:
switch (ia->ia_action) {
case IEEE80211_ACTION_BA_ADDBA_REQUEST:
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_action_ba_addbarequest),
return EINVAL);
break;
case IEEE80211_ACTION_BA_ADDBA_RESPONSE:
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_action_ba_addbaresponse),
return EINVAL);
break;
case IEEE80211_ACTION_BA_DELBA:
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_action_ba_delba),
return EINVAL);
break;
}
break;
case IEEE80211_ACTION_CAT_HT:
switch (ia->ia_action) {
case IEEE80211_ACTION_HT_TXCHWIDTH:
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_action_ht_txchwidth),
return EINVAL);
break;
case IEEE80211_ACTION_HT_MIMOPWRSAVE:
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_action_ht_mimopowersave),
return EINVAL);
break;
}
break;
#ifdef IEEE80211_SUPPORT_MESH
case IEEE80211_ACTION_CAT_MESH:
switch (ia->ia_action) {
case IEEE80211_ACTION_MESH_LMETRIC:
/*
* XXX: verification is true only if we are using
* Airtime link metric (default)
*/
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_meshlmetric_ie),
return EINVAL);
break;
case IEEE80211_ACTION_MESH_HWMP:
/* verify something */
break;
case IEEE80211_ACTION_MESH_GANN:
IEEE80211_VERIFY_LENGTH(efrm - frm,
sizeof(struct ieee80211_meshgann_ie),
return EINVAL);
break;
case IEEE80211_ACTION_MESH_CC:
case IEEE80211_ACTION_MESH_MCCA_SREQ:
case IEEE80211_ACTION_MESH_MCCA_SREP:
case IEEE80211_ACTION_MESH_MCCA_AREQ:
case IEEE80211_ACTION_MESH_MCCA_ADVER:
case IEEE80211_ACTION_MESH_MCCA_TRDOWN:
case IEEE80211_ACTION_MESH_TBTT_REQ:
case IEEE80211_ACTION_MESH_TBTT_RES:
/* reject these early on, not implemented */
IEEE80211_DISCARD(vap,
IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT,
wh, NULL, "not implemented yet, act=0x%02X",
ia->ia_action);
return EINVAL;
}
break;
case IEEE80211_ACTION_CAT_SELF_PROT:
/* If TA or RA group address discard silently */
if (IEEE80211_IS_MULTICAST(wh->i_addr1) ||
IEEE80211_IS_MULTICAST(wh->i_addr2))
return EINVAL;
/*
* XXX: Should we verify complete length now or it is
* to varying in sizes?
*/
switch (ia->ia_action) {
case IEEE80211_ACTION_MESHPEERING_CONFIRM:
case IEEE80211_ACTION_MESHPEERING_CLOSE:
/* is not a peering candidate (yet) */
if (ni == vap->iv_bss)
return EINVAL;
break;
}
break;
#endif
}
return 0;
}
#ifdef IEEE80211_DEBUG
/*
* Debugging support.
*/
void
ieee80211_ssid_mismatch(struct ieee80211vap *vap, const char *tag,
uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid)
{
printf("[%s] discard %s frame, ssid mismatch: ",
ether_sprintf(mac), tag);
ieee80211_print_essid(ssid + 2, ssid[1]);
printf("\n");
}
/*
* Return the bssid of a frame.
*/
static const uint8_t *
ieee80211_getbssid(const struct ieee80211vap *vap,
const struct ieee80211_frame *wh)
{
if (vap->iv_opmode == IEEE80211_M_STA)
return wh->i_addr2;
if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) != IEEE80211_FC1_DIR_NODS)
return wh->i_addr1;
if ((wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_PS_POLL)
return wh->i_addr1;
return wh->i_addr3;
}
#include <machine/stdarg.h>
void
ieee80211_note(const struct ieee80211vap *vap, const char *fmt, ...)
{
char buf[128]; /* XXX */
va_list ap;
va_start(ap, fmt);
vsnprintf(buf, sizeof(buf), fmt, ap);
va_end(ap);
if_printf(vap->iv_ifp, "%s", buf); /* NB: no \n */
}
void
ieee80211_note_frame(const struct ieee80211vap *vap,
const struct ieee80211_frame *wh,
const char *fmt, ...)
{
char buf[128]; /* XXX */
va_list ap;
va_start(ap, fmt);
vsnprintf(buf, sizeof(buf), fmt, ap);
va_end(ap);
if_printf(vap->iv_ifp, "[%s] %s\n",
ether_sprintf(ieee80211_getbssid(vap, wh)), buf);
}
void
ieee80211_note_mac(const struct ieee80211vap *vap,
const uint8_t mac[IEEE80211_ADDR_LEN],
const char *fmt, ...)
{
char buf[128]; /* XXX */
va_list ap;
va_start(ap, fmt);
vsnprintf(buf, sizeof(buf), fmt, ap);
va_end(ap);
if_printf(vap->iv_ifp, "[%s] %s\n", ether_sprintf(mac), buf);
}
void
ieee80211_discard_frame(const struct ieee80211vap *vap,
const struct ieee80211_frame *wh,
const char *type, const char *fmt, ...)
{
va_list ap;
if_printf(vap->iv_ifp, "[%s] discard ",
ether_sprintf(ieee80211_getbssid(vap, wh)));
if (type == NULL) {
printf("%s frame, ", ieee80211_mgt_subtype_name[
(wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) >>
IEEE80211_FC0_SUBTYPE_SHIFT]);
} else
printf("%s frame, ", type);
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
printf("\n");
}
void
ieee80211_discard_ie(const struct ieee80211vap *vap,
const struct ieee80211_frame *wh,
const char *type, const char *fmt, ...)
{
va_list ap;
if_printf(vap->iv_ifp, "[%s] discard ",
ether_sprintf(ieee80211_getbssid(vap, wh)));
if (type != NULL)
printf("%s information element, ", type);
else
printf("information element, ");
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
printf("\n");
}
void
ieee80211_discard_mac(const struct ieee80211vap *vap,
const uint8_t mac[IEEE80211_ADDR_LEN],
const char *type, const char *fmt, ...)
{
va_list ap;
if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(mac));
if (type != NULL)
printf("%s frame, ", type);
else
printf("frame, ");
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
printf("\n");
}
#endif /* IEEE80211_DEBUG */