c87e3f833c
A) Fibre Channel Target Mode support mostly works (SAS/SPI won't be too far behind). I'd say that this probably works just about as well as isp(4) does right now. Still, it and isp(4) and the whole target mode stack need a bit of tightening. B) The startup sequence has been changed so that after all attaches are done, a set of enable functions are called. The idea here is that the attaches do whatever needs to be done *prior* to a port being enabled and the enables do what need to be done for enabling stuff for a port after it's been enabled. This means that we also have events handled by their proper handlers as we start up. C) Conditional code that means that this driver goes back all the way to RELENG_4 in terms of support. D) Quite a lot of little nitty bug fixes- some discovered by doing RELENG_4 support. We've been living under Giant *waaaayyyyy* too long and it's made some of us (me) sloppy. E) Some shutdown hook stuff that makes sure we don't blow up during a reboot (like by the arrival of a new command from an initiator). There's been some testing and LINT checking, but not as complete as would be liked. Regression testing with Fusion RAID instances has not been possible. Caveat Emptor. Sponsored by: LSI-Logic.
2480 lines
66 KiB
C
2480 lines
66 KiB
C
/*-
|
|
* Generic routines for LSI Fusion adapters.
|
|
* FreeBSD Version.
|
|
*
|
|
* Copyright (c) 2000, 2001 by Greg Ansley
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
/*-
|
|
* Copyright (c) 2002, 2006 by Matthew Jacob
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon including
|
|
* a substantially similar Disclaimer requirement for further binary
|
|
* redistribution.
|
|
* 3. Neither the names of the above listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Support from Chris Ellsworth in order to make SAS adapters work
|
|
* is gratefully acknowledged.
|
|
*/
|
|
/*-
|
|
* Copyright (c) 2004, Avid Technology, Inc. and its contributors.
|
|
* Copyright (c) 2005, WHEEL Sp. z o.o.
|
|
* Copyright (c) 2004, 2005 Justin T. Gibbs
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon including
|
|
* a substantially similar Disclaimer requirement for further binary
|
|
* redistribution.
|
|
* 3. Neither the names of the above listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <dev/mpt/mpt.h>
|
|
#include <dev/mpt/mpt_cam.h> /* XXX For static handler registration */
|
|
#include <dev/mpt/mpt_raid.h> /* XXX For static handler registration */
|
|
|
|
#include <dev/mpt/mpilib/mpi.h>
|
|
#include <dev/mpt/mpilib/mpi_ioc.h>
|
|
#include <dev/mpt/mpilib/mpi_fc.h>
|
|
#include <dev/mpt/mpilib/mpi_targ.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#define MPT_MAX_TRYS 3
|
|
#define MPT_MAX_WAIT 300000
|
|
|
|
static int maxwait_ack = 0;
|
|
static int maxwait_int = 0;
|
|
static int maxwait_state = 0;
|
|
|
|
TAILQ_HEAD(, mpt_softc) mpt_tailq = TAILQ_HEAD_INITIALIZER(mpt_tailq);
|
|
mpt_reply_handler_t *mpt_reply_handlers[MPT_NUM_REPLY_HANDLERS];
|
|
|
|
static mpt_reply_handler_t mpt_default_reply_handler;
|
|
static mpt_reply_handler_t mpt_config_reply_handler;
|
|
static mpt_reply_handler_t mpt_handshake_reply_handler;
|
|
static mpt_reply_handler_t mpt_event_reply_handler;
|
|
static void mpt_send_event_ack(struct mpt_softc *mpt, request_t *ack_req,
|
|
MSG_EVENT_NOTIFY_REPLY *msg, uint32_t context);
|
|
static int mpt_send_event_request(struct mpt_softc *mpt, int onoff);
|
|
static int mpt_soft_reset(struct mpt_softc *mpt);
|
|
static void mpt_hard_reset(struct mpt_softc *mpt);
|
|
static int mpt_configure_ioc(struct mpt_softc *mpt);
|
|
static int mpt_enable_ioc(struct mpt_softc *mpt, int);
|
|
|
|
/************************* Personality Module Support *************************/
|
|
/*
|
|
* We include one extra entry that is guaranteed to be NULL
|
|
* to simplify our itterator.
|
|
*/
|
|
static struct mpt_personality *mpt_personalities[MPT_MAX_PERSONALITIES + 1];
|
|
static __inline struct mpt_personality*
|
|
mpt_pers_find(struct mpt_softc *, u_int);
|
|
static __inline struct mpt_personality*
|
|
mpt_pers_find_reverse(struct mpt_softc *, u_int);
|
|
|
|
static __inline struct mpt_personality *
|
|
mpt_pers_find(struct mpt_softc *mpt, u_int start_at)
|
|
{
|
|
KASSERT(start_at <= MPT_MAX_PERSONALITIES,
|
|
("mpt_pers_find: starting position out of range\n"));
|
|
|
|
while (start_at < MPT_MAX_PERSONALITIES
|
|
&& (mpt->mpt_pers_mask & (0x1 << start_at)) == 0) {
|
|
start_at++;
|
|
}
|
|
return (mpt_personalities[start_at]);
|
|
}
|
|
|
|
/*
|
|
* Used infrequently, so no need to optimize like a forward
|
|
* traversal where we use the MAX+1 is guaranteed to be NULL
|
|
* trick.
|
|
*/
|
|
static __inline struct mpt_personality *
|
|
mpt_pers_find_reverse(struct mpt_softc *mpt, u_int start_at)
|
|
{
|
|
while (start_at < MPT_MAX_PERSONALITIES
|
|
&& (mpt->mpt_pers_mask & (0x1 << start_at)) == 0) {
|
|
start_at--;
|
|
}
|
|
if (start_at < MPT_MAX_PERSONALITIES)
|
|
return (mpt_personalities[start_at]);
|
|
return (NULL);
|
|
}
|
|
|
|
#define MPT_PERS_FOREACH(mpt, pers) \
|
|
for (pers = mpt_pers_find(mpt, /*start_at*/0); \
|
|
pers != NULL; \
|
|
pers = mpt_pers_find(mpt, /*start_at*/pers->id+1))
|
|
|
|
#define MPT_PERS_FOREACH_REVERSE(mpt, pers) \
|
|
for (pers = mpt_pers_find_reverse(mpt, MPT_MAX_PERSONALITIES-1);\
|
|
pers != NULL; \
|
|
pers = mpt_pers_find_reverse(mpt, /*start_at*/pers->id-1))
|
|
|
|
static mpt_load_handler_t mpt_stdload;
|
|
static mpt_probe_handler_t mpt_stdprobe;
|
|
static mpt_attach_handler_t mpt_stdattach;
|
|
static mpt_enable_handler_t mpt_stdenable;
|
|
static mpt_event_handler_t mpt_stdevent;
|
|
static mpt_reset_handler_t mpt_stdreset;
|
|
static mpt_shutdown_handler_t mpt_stdshutdown;
|
|
static mpt_detach_handler_t mpt_stddetach;
|
|
static mpt_unload_handler_t mpt_stdunload;
|
|
static struct mpt_personality mpt_default_personality =
|
|
{
|
|
.load = mpt_stdload,
|
|
.probe = mpt_stdprobe,
|
|
.attach = mpt_stdattach,
|
|
.enable = mpt_stdenable,
|
|
.event = mpt_stdevent,
|
|
.reset = mpt_stdreset,
|
|
.shutdown = mpt_stdshutdown,
|
|
.detach = mpt_stddetach,
|
|
.unload = mpt_stdunload
|
|
};
|
|
|
|
static mpt_load_handler_t mpt_core_load;
|
|
static mpt_attach_handler_t mpt_core_attach;
|
|
static mpt_enable_handler_t mpt_core_enable;
|
|
static mpt_reset_handler_t mpt_core_ioc_reset;
|
|
static mpt_event_handler_t mpt_core_event;
|
|
static mpt_shutdown_handler_t mpt_core_shutdown;
|
|
static mpt_shutdown_handler_t mpt_core_detach;
|
|
static mpt_unload_handler_t mpt_core_unload;
|
|
static struct mpt_personality mpt_core_personality =
|
|
{
|
|
.name = "mpt_core",
|
|
.load = mpt_core_load,
|
|
.attach = mpt_core_attach,
|
|
.enable = mpt_core_enable,
|
|
.event = mpt_core_event,
|
|
.reset = mpt_core_ioc_reset,
|
|
.shutdown = mpt_core_shutdown,
|
|
.detach = mpt_core_detach,
|
|
.unload = mpt_core_unload,
|
|
};
|
|
|
|
/*
|
|
* Manual declaration so that DECLARE_MPT_PERSONALITY doesn't need
|
|
* ordering information. We want the core to always register FIRST.
|
|
* other modules are set to SI_ORDER_SECOND.
|
|
*/
|
|
static moduledata_t mpt_core_mod = {
|
|
"mpt_core", mpt_modevent, &mpt_core_personality
|
|
};
|
|
DECLARE_MODULE(mpt_core, mpt_core_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
|
|
MODULE_VERSION(mpt_core, 1);
|
|
|
|
#define MPT_PERS_ATTACHED(pers, mpt) ((mpt)->mpt_pers_mask & (0x1 << pers->id))
|
|
|
|
|
|
int
|
|
mpt_modevent(module_t mod, int type, void *data)
|
|
{
|
|
struct mpt_personality *pers;
|
|
int error;
|
|
|
|
pers = (struct mpt_personality *)data;
|
|
|
|
error = 0;
|
|
switch (type) {
|
|
case MOD_LOAD:
|
|
{
|
|
mpt_load_handler_t **def_handler;
|
|
mpt_load_handler_t **pers_handler;
|
|
int i;
|
|
|
|
for (i = 0; i < MPT_MAX_PERSONALITIES; i++) {
|
|
if (mpt_personalities[i] == NULL)
|
|
break;
|
|
}
|
|
if (i >= MPT_MAX_PERSONALITIES) {
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
pers->id = i;
|
|
mpt_personalities[i] = pers;
|
|
|
|
/* Install standard/noop handlers for any NULL entries. */
|
|
def_handler = MPT_PERS_FIRST_HANDLER(&mpt_default_personality);
|
|
pers_handler = MPT_PERS_FIRST_HANDLER(pers);
|
|
while (pers_handler <= MPT_PERS_LAST_HANDLER(pers)) {
|
|
if (*pers_handler == NULL)
|
|
*pers_handler = *def_handler;
|
|
pers_handler++;
|
|
def_handler++;
|
|
}
|
|
|
|
error = (pers->load(pers));
|
|
if (error != 0)
|
|
mpt_personalities[i] = NULL;
|
|
break;
|
|
}
|
|
case MOD_SHUTDOWN:
|
|
break;
|
|
#if __FreeBSD_version >= 500000
|
|
case MOD_QUIESCE:
|
|
break;
|
|
#endif
|
|
case MOD_UNLOAD:
|
|
error = pers->unload(pers);
|
|
mpt_personalities[pers->id] = NULL;
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
mpt_stdload(struct mpt_personality *pers)
|
|
{
|
|
/* Load is always successfull. */
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_stdprobe(struct mpt_softc *mpt)
|
|
{
|
|
/* Probe is always successfull. */
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_stdattach(struct mpt_softc *mpt)
|
|
{
|
|
/* Attach is always successfull. */
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_stdenable(struct mpt_softc *mpt)
|
|
{
|
|
/* Enable is always successfull. */
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_stdevent(struct mpt_softc *mpt, request_t *req, MSG_EVENT_NOTIFY_REPLY *msg)
|
|
{
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_stdevent: 0x%x\n", msg->Event & 0xFF);
|
|
/* Event was not for us. */
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
mpt_stdreset(struct mpt_softc *mpt, int type)
|
|
{
|
|
}
|
|
|
|
void
|
|
mpt_stdshutdown(struct mpt_softc *mpt)
|
|
{
|
|
}
|
|
|
|
void
|
|
mpt_stddetach(struct mpt_softc *mpt)
|
|
{
|
|
}
|
|
|
|
int
|
|
mpt_stdunload(struct mpt_personality *pers)
|
|
{
|
|
/* Unload is always successfull. */
|
|
return (0);
|
|
}
|
|
|
|
/******************************* Bus DMA Support ******************************/
|
|
void
|
|
mpt_map_rquest(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct mpt_map_info *map_info;
|
|
|
|
map_info = (struct mpt_map_info *)arg;
|
|
map_info->error = error;
|
|
map_info->phys = segs->ds_addr;
|
|
}
|
|
|
|
/**************************** Reply/Event Handling ****************************/
|
|
int
|
|
mpt_register_handler(struct mpt_softc *mpt, mpt_handler_type type,
|
|
mpt_handler_t handler, uint32_t *phandler_id)
|
|
{
|
|
|
|
switch (type) {
|
|
case MPT_HANDLER_REPLY:
|
|
{
|
|
u_int cbi;
|
|
u_int free_cbi;
|
|
|
|
if (phandler_id == NULL)
|
|
return (EINVAL);
|
|
|
|
free_cbi = MPT_HANDLER_ID_NONE;
|
|
for (cbi = 0; cbi < MPT_NUM_REPLY_HANDLERS; cbi++) {
|
|
/*
|
|
* If the same handler is registered multiple
|
|
* times, don't error out. Just return the
|
|
* index of the original registration.
|
|
*/
|
|
if (mpt_reply_handlers[cbi] == handler.reply_handler) {
|
|
*phandler_id = MPT_CBI_TO_HID(cbi);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Fill from the front in the hope that
|
|
* all registered handlers consume only a
|
|
* single cache line.
|
|
*
|
|
* We don't break on the first empty slot so
|
|
* that the full table is checked to see if
|
|
* this handler was previously registered.
|
|
*/
|
|
if (free_cbi == MPT_HANDLER_ID_NONE &&
|
|
(mpt_reply_handlers[cbi]
|
|
== mpt_default_reply_handler))
|
|
free_cbi = cbi;
|
|
}
|
|
if (free_cbi == MPT_HANDLER_ID_NONE) {
|
|
return (ENOMEM);
|
|
}
|
|
mpt_reply_handlers[free_cbi] = handler.reply_handler;
|
|
*phandler_id = MPT_CBI_TO_HID(free_cbi);
|
|
break;
|
|
}
|
|
default:
|
|
mpt_prt(mpt, "mpt_register_handler unknown type %d\n", type);
|
|
return (EINVAL);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_deregister_handler(struct mpt_softc *mpt, mpt_handler_type type,
|
|
mpt_handler_t handler, uint32_t handler_id)
|
|
{
|
|
|
|
switch (type) {
|
|
case MPT_HANDLER_REPLY:
|
|
{
|
|
u_int cbi;
|
|
|
|
cbi = MPT_CBI(handler_id);
|
|
if (cbi >= MPT_NUM_REPLY_HANDLERS
|
|
|| mpt_reply_handlers[cbi] != handler.reply_handler)
|
|
return (ENOENT);
|
|
mpt_reply_handlers[cbi] = mpt_default_reply_handler;
|
|
break;
|
|
}
|
|
default:
|
|
mpt_prt(mpt, "mpt_deregister_handler unknown type %d\n", type);
|
|
return (EINVAL);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mpt_default_reply_handler(struct mpt_softc *mpt, request_t *req,
|
|
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
|
|
{
|
|
mpt_prt(mpt,
|
|
"Default Handler Called: req=%p:%u reply_descriptor=%x frame=%p\n",
|
|
req, req->serno, reply_desc, reply_frame);
|
|
|
|
if (reply_frame != NULL)
|
|
mpt_dump_reply_frame(mpt, reply_frame);
|
|
|
|
mpt_prt(mpt, "Reply Frame Ignored\n");
|
|
|
|
return (/*free_reply*/TRUE);
|
|
}
|
|
|
|
static int
|
|
mpt_config_reply_handler(struct mpt_softc *mpt, request_t *req,
|
|
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
|
|
{
|
|
if (req != NULL) {
|
|
|
|
if (reply_frame != NULL) {
|
|
MSG_CONFIG *cfgp;
|
|
MSG_CONFIG_REPLY *reply;
|
|
|
|
cfgp = (MSG_CONFIG *)req->req_vbuf;
|
|
reply = (MSG_CONFIG_REPLY *)reply_frame;
|
|
req->IOCStatus = le16toh(reply_frame->IOCStatus);
|
|
bcopy(&reply->Header, &cfgp->Header,
|
|
sizeof(cfgp->Header));
|
|
}
|
|
req->state &= ~REQ_STATE_QUEUED;
|
|
req->state |= REQ_STATE_DONE;
|
|
TAILQ_REMOVE(&mpt->request_pending_list, req, links);
|
|
|
|
if ((req->state & REQ_STATE_NEED_WAKEUP) != 0)
|
|
wakeup(req);
|
|
}
|
|
|
|
return (/*free_reply*/TRUE);
|
|
}
|
|
|
|
static int
|
|
mpt_handshake_reply_handler(struct mpt_softc *mpt, request_t *req,
|
|
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
|
|
{
|
|
/* Nothing to be done. */
|
|
return (/*free_reply*/TRUE);
|
|
}
|
|
|
|
static int
|
|
mpt_event_reply_handler(struct mpt_softc *mpt, request_t *req,
|
|
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
|
|
{
|
|
int free_reply;
|
|
|
|
if (reply_frame == NULL) {
|
|
mpt_prt(mpt, "Event Handler: req %p:%u - Unexpected NULL reply\n",
|
|
req, req->serno);
|
|
return (/*free_reply*/TRUE);
|
|
}
|
|
|
|
free_reply = TRUE;
|
|
switch (reply_frame->Function) {
|
|
case MPI_FUNCTION_EVENT_NOTIFICATION:
|
|
{
|
|
MSG_EVENT_NOTIFY_REPLY *msg;
|
|
struct mpt_personality *pers;
|
|
u_int handled;
|
|
|
|
handled = 0;
|
|
msg = (MSG_EVENT_NOTIFY_REPLY *)reply_frame;
|
|
MPT_PERS_FOREACH(mpt, pers)
|
|
handled += pers->event(mpt, req, msg);
|
|
|
|
if (handled == 0 && mpt->mpt_pers_mask == 0) {
|
|
mpt_lprt(mpt, MPT_PRT_INFO,
|
|
"No Handlers For Any Event Notify Frames. "
|
|
"Event %#x (ACK %sequired).\n",
|
|
msg->Event, msg->AckRequired? "r" : "not r");
|
|
} else if (handled == 0) {
|
|
mpt_lprt(mpt, MPT_PRT_WARN,
|
|
"Unhandled Event Notify Frame. Event %#x "
|
|
"(ACK %sequired).\n",
|
|
msg->Event, msg->AckRequired? "r" : "not r");
|
|
}
|
|
|
|
if (msg->AckRequired) {
|
|
request_t *ack_req;
|
|
uint32_t context;
|
|
|
|
context = htole32(req->index|MPT_REPLY_HANDLER_EVENTS);
|
|
ack_req = mpt_get_request(mpt, /*sleep_ok*/FALSE);
|
|
if (ack_req == NULL) {
|
|
struct mpt_evtf_record *evtf;
|
|
|
|
evtf = (struct mpt_evtf_record *)reply_frame;
|
|
evtf->context = context;
|
|
LIST_INSERT_HEAD(&mpt->ack_frames, evtf, links);
|
|
free_reply = FALSE;
|
|
break;
|
|
}
|
|
mpt_send_event_ack(mpt, ack_req, msg, context);
|
|
}
|
|
break;
|
|
}
|
|
case MPI_FUNCTION_PORT_ENABLE:
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "enable port reply\n");
|
|
break;
|
|
case MPI_FUNCTION_EVENT_ACK:
|
|
break;
|
|
default:
|
|
mpt_prt(mpt, "Unknown Event Function: %x\n",
|
|
reply_frame->Function);
|
|
break;
|
|
}
|
|
|
|
if (req != NULL
|
|
&& (reply_frame->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) == 0) {
|
|
|
|
req->state &= ~REQ_STATE_QUEUED;
|
|
req->state |= REQ_STATE_DONE;
|
|
TAILQ_REMOVE(&mpt->request_pending_list, req, links);
|
|
|
|
if ((req->state & REQ_STATE_NEED_WAKEUP) != 0)
|
|
wakeup(req);
|
|
else
|
|
mpt_free_request(mpt, req);
|
|
}
|
|
return (free_reply);
|
|
}
|
|
|
|
/*
|
|
* Process an asynchronous event from the IOC.
|
|
*/
|
|
static int
|
|
mpt_core_event(struct mpt_softc *mpt, request_t *req,
|
|
MSG_EVENT_NOTIFY_REPLY *msg)
|
|
{
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_core_event: 0x%x\n",
|
|
msg->Event & 0xFF);
|
|
switch(msg->Event & 0xFF) {
|
|
case MPI_EVENT_NONE:
|
|
break;
|
|
case MPI_EVENT_LOG_DATA:
|
|
{
|
|
int i;
|
|
|
|
/* Some error occured that LSI wants logged */
|
|
mpt_prt(mpt, "EvtLogData: IOCLogInfo: 0x%08x\n",
|
|
msg->IOCLogInfo);
|
|
mpt_prt(mpt, "\tEvtLogData: Event Data:");
|
|
for (i = 0; i < msg->EventDataLength; i++)
|
|
mpt_prtc(mpt, " %08x", msg->Data[i]);
|
|
mpt_prtc(mpt, "\n");
|
|
break;
|
|
}
|
|
case MPI_EVENT_EVENT_CHANGE:
|
|
/*
|
|
* This is just an acknowledgement
|
|
* of our mpt_send_event_request.
|
|
*/
|
|
break;
|
|
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
|
|
break;
|
|
default:
|
|
return (/*handled*/0);
|
|
break;
|
|
}
|
|
return (/*handled*/1);
|
|
}
|
|
|
|
static void
|
|
mpt_send_event_ack(struct mpt_softc *mpt, request_t *ack_req,
|
|
MSG_EVENT_NOTIFY_REPLY *msg, uint32_t context)
|
|
{
|
|
MSG_EVENT_ACK *ackp;
|
|
|
|
ackp = (MSG_EVENT_ACK *)ack_req->req_vbuf;
|
|
bzero(ackp, sizeof *ackp);
|
|
ackp->Function = MPI_FUNCTION_EVENT_ACK;
|
|
ackp->Event = msg->Event;
|
|
ackp->EventContext = msg->EventContext;
|
|
ackp->MsgContext = context;
|
|
mpt_check_doorbell(mpt);
|
|
mpt_send_cmd(mpt, ack_req);
|
|
}
|
|
|
|
/***************************** Interrupt Handling *****************************/
|
|
void
|
|
mpt_intr(void *arg)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
uint32_t reply_desc;
|
|
int ntrips = 0;
|
|
|
|
mpt = (struct mpt_softc *)arg;
|
|
while ((reply_desc = mpt_pop_reply_queue(mpt)) != MPT_REPLY_EMPTY) {
|
|
request_t *req;
|
|
MSG_DEFAULT_REPLY *reply_frame;
|
|
uint32_t reply_baddr;
|
|
uint32_t ctxt_idx;
|
|
u_int cb_index;
|
|
u_int req_index;
|
|
int free_rf;
|
|
|
|
req = NULL;
|
|
reply_frame = NULL;
|
|
reply_baddr = 0;
|
|
if ((reply_desc & MPI_ADDRESS_REPLY_A_BIT) != 0) {
|
|
u_int offset;
|
|
/*
|
|
* Insure that the reply frame is coherent.
|
|
*/
|
|
reply_baddr = (reply_desc << 1);
|
|
offset = reply_baddr - (mpt->reply_phys & 0xFFFFFFFF);
|
|
bus_dmamap_sync_range(mpt->reply_dmat,
|
|
mpt->reply_dmap, offset, MPT_REPLY_SIZE,
|
|
BUS_DMASYNC_POSTREAD);
|
|
reply_frame = MPT_REPLY_OTOV(mpt, offset);
|
|
ctxt_idx = le32toh(reply_frame->MsgContext);
|
|
} else {
|
|
uint32_t type;
|
|
|
|
type = MPI_GET_CONTEXT_REPLY_TYPE(reply_desc);
|
|
ctxt_idx = reply_desc;
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG1, "Context Reply: 0x%08x\n",
|
|
reply_desc);
|
|
|
|
switch (type) {
|
|
case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
|
|
ctxt_idx &= MPI_CONTEXT_REPLY_CONTEXT_MASK;
|
|
break;
|
|
case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
|
|
ctxt_idx = GET_IO_INDEX(reply_desc);
|
|
if (mpt->tgt_cmd_ptrs == NULL) {
|
|
mpt_prt(mpt,
|
|
"mpt_intr: no target cmd ptrs\n");
|
|
reply_desc = MPT_REPLY_EMPTY;
|
|
break;
|
|
}
|
|
if (ctxt_idx >= mpt->tgt_cmds_allocated) {
|
|
mpt_prt(mpt,
|
|
"mpt_intr: bad tgt cmd ctxt %u\n",
|
|
ctxt_idx);
|
|
reply_desc = MPT_REPLY_EMPTY;
|
|
ntrips = 1000;
|
|
break;
|
|
}
|
|
req = mpt->tgt_cmd_ptrs[ctxt_idx];
|
|
if (req == NULL) {
|
|
mpt_prt(mpt, "no request backpointer "
|
|
"at index %u", ctxt_idx);
|
|
reply_desc = MPT_REPLY_EMPTY;
|
|
ntrips = 1000;
|
|
break;
|
|
}
|
|
/*
|
|
* Reformulate ctxt_idx to be just as if
|
|
* it were another type of context reply
|
|
* so the code below will find the request
|
|
* via indexing into the pool.
|
|
*/
|
|
ctxt_idx =
|
|
req->index | mpt->scsi_tgt_handler_id;
|
|
req = NULL;
|
|
break;
|
|
case MPI_CONTEXT_REPLY_TYPE_LAN:
|
|
mpt_prt(mpt, "LAN CONTEXT REPLY: 0x%08x\n",
|
|
reply_desc);
|
|
reply_desc = MPT_REPLY_EMPTY;
|
|
break;
|
|
default:
|
|
mpt_prt(mpt, "Context Reply 0x%08x?\n", type);
|
|
reply_desc = MPT_REPLY_EMPTY;
|
|
break;
|
|
}
|
|
if (reply_desc == MPT_REPLY_EMPTY) {
|
|
if (ntrips++ > 1000) {
|
|
break;
|
|
}
|
|
continue;
|
|
}
|
|
}
|
|
|
|
cb_index = MPT_CONTEXT_TO_CBI(ctxt_idx);
|
|
req_index = MPT_CONTEXT_TO_REQI(ctxt_idx);
|
|
if (req_index < MPT_MAX_REQUESTS(mpt)) {
|
|
req = &mpt->request_pool[req_index];
|
|
}
|
|
|
|
free_rf = mpt_reply_handlers[cb_index](mpt, req,
|
|
reply_desc, reply_frame);
|
|
|
|
if (reply_frame != NULL && free_rf)
|
|
mpt_free_reply(mpt, reply_baddr);
|
|
|
|
/*
|
|
* If we got ourselves disabled, don't get stuck in a loop
|
|
*/
|
|
if (mpt->disabled) {
|
|
mpt_disable_ints(mpt);
|
|
break;
|
|
}
|
|
if (ntrips++ > 1000) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/******************************* Error Recovery *******************************/
|
|
void
|
|
mpt_complete_request_chain(struct mpt_softc *mpt, struct req_queue *chain,
|
|
u_int iocstatus)
|
|
{
|
|
MSG_DEFAULT_REPLY ioc_status_frame;
|
|
request_t *req;
|
|
|
|
bzero(&ioc_status_frame, sizeof(ioc_status_frame));
|
|
ioc_status_frame.MsgLength = roundup2(sizeof(ioc_status_frame), 4);
|
|
ioc_status_frame.IOCStatus = iocstatus;
|
|
while((req = TAILQ_FIRST(chain)) != NULL) {
|
|
MSG_REQUEST_HEADER *msg_hdr;
|
|
u_int cb_index;
|
|
TAILQ_REMOVE(chain, req, links);
|
|
msg_hdr = (MSG_REQUEST_HEADER *)req->req_vbuf;
|
|
ioc_status_frame.Function = msg_hdr->Function;
|
|
ioc_status_frame.MsgContext = msg_hdr->MsgContext;
|
|
cb_index = MPT_CONTEXT_TO_CBI(le32toh(msg_hdr->MsgContext));
|
|
mpt_reply_handlers[cb_index](mpt, req, msg_hdr->MsgContext,
|
|
&ioc_status_frame);
|
|
}
|
|
}
|
|
|
|
/********************************* Diagnostics ********************************/
|
|
/*
|
|
* Perform a diagnostic dump of a reply frame.
|
|
*/
|
|
void
|
|
mpt_dump_reply_frame(struct mpt_softc *mpt, MSG_DEFAULT_REPLY *reply_frame)
|
|
{
|
|
|
|
mpt_prt(mpt, "Address Reply:\n");
|
|
mpt_print_reply(reply_frame);
|
|
}
|
|
|
|
/******************************* Doorbell Access ******************************/
|
|
static __inline uint32_t mpt_rd_db(struct mpt_softc *mpt);
|
|
static __inline uint32_t mpt_rd_intr(struct mpt_softc *mpt);
|
|
|
|
static __inline uint32_t
|
|
mpt_rd_db(struct mpt_softc *mpt)
|
|
{
|
|
return mpt_read(mpt, MPT_OFFSET_DOORBELL);
|
|
}
|
|
|
|
static __inline uint32_t
|
|
mpt_rd_intr(struct mpt_softc *mpt)
|
|
{
|
|
return mpt_read(mpt, MPT_OFFSET_INTR_STATUS);
|
|
}
|
|
|
|
/* Busy wait for a door bell to be read by IOC */
|
|
static int
|
|
mpt_wait_db_ack(struct mpt_softc *mpt)
|
|
{
|
|
int i;
|
|
for (i=0; i < MPT_MAX_WAIT; i++) {
|
|
if (!MPT_DB_IS_BUSY(mpt_rd_intr(mpt))) {
|
|
maxwait_ack = i > maxwait_ack ? i : maxwait_ack;
|
|
return (MPT_OK);
|
|
}
|
|
DELAY(200);
|
|
}
|
|
return (MPT_FAIL);
|
|
}
|
|
|
|
/* Busy wait for a door bell interrupt */
|
|
static int
|
|
mpt_wait_db_int(struct mpt_softc *mpt)
|
|
{
|
|
int i;
|
|
for (i=0; i < MPT_MAX_WAIT; i++) {
|
|
if (MPT_DB_INTR(mpt_rd_intr(mpt))) {
|
|
maxwait_int = i > maxwait_int ? i : maxwait_int;
|
|
return MPT_OK;
|
|
}
|
|
DELAY(100);
|
|
}
|
|
return (MPT_FAIL);
|
|
}
|
|
|
|
/* Wait for IOC to transition to a give state */
|
|
void
|
|
mpt_check_doorbell(struct mpt_softc *mpt)
|
|
{
|
|
uint32_t db = mpt_rd_db(mpt);
|
|
if (MPT_STATE(db) != MPT_DB_STATE_RUNNING) {
|
|
mpt_prt(mpt, "Device not running\n");
|
|
mpt_print_db(db);
|
|
}
|
|
}
|
|
|
|
/* Wait for IOC to transition to a give state */
|
|
static int
|
|
mpt_wait_state(struct mpt_softc *mpt, enum DB_STATE_BITS state)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MPT_MAX_WAIT; i++) {
|
|
uint32_t db = mpt_rd_db(mpt);
|
|
if (MPT_STATE(db) == state) {
|
|
maxwait_state = i > maxwait_state ? i : maxwait_state;
|
|
return (MPT_OK);
|
|
}
|
|
DELAY(100);
|
|
}
|
|
return (MPT_FAIL);
|
|
}
|
|
|
|
|
|
/************************* Intialization/Configuration ************************/
|
|
static int mpt_download_fw(struct mpt_softc *mpt);
|
|
|
|
/* Issue the reset COMMAND to the IOC */
|
|
static int
|
|
mpt_soft_reset(struct mpt_softc *mpt)
|
|
{
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "soft reset\n");
|
|
|
|
/* Have to use hard reset if we are not in Running state */
|
|
if (MPT_STATE(mpt_rd_db(mpt)) != MPT_DB_STATE_RUNNING) {
|
|
mpt_prt(mpt, "soft reset failed: device not running\n");
|
|
return (MPT_FAIL);
|
|
}
|
|
|
|
/* If door bell is in use we don't have a chance of getting
|
|
* a word in since the IOC probably crashed in message
|
|
* processing. So don't waste our time.
|
|
*/
|
|
if (MPT_DB_IS_IN_USE(mpt_rd_db(mpt))) {
|
|
mpt_prt(mpt, "soft reset failed: doorbell wedged\n");
|
|
return (MPT_FAIL);
|
|
}
|
|
|
|
/* Send the reset request to the IOC */
|
|
mpt_write(mpt, MPT_OFFSET_DOORBELL,
|
|
MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET << MPI_DOORBELL_FUNCTION_SHIFT);
|
|
if (mpt_wait_db_ack(mpt) != MPT_OK) {
|
|
mpt_prt(mpt, "soft reset failed: ack timeout\n");
|
|
return (MPT_FAIL);
|
|
}
|
|
|
|
/* Wait for the IOC to reload and come out of reset state */
|
|
if (mpt_wait_state(mpt, MPT_DB_STATE_READY) != MPT_OK) {
|
|
mpt_prt(mpt, "soft reset failed: device did not restart\n");
|
|
return (MPT_FAIL);
|
|
}
|
|
|
|
return MPT_OK;
|
|
}
|
|
|
|
static int
|
|
mpt_enable_diag_mode(struct mpt_softc *mpt)
|
|
{
|
|
int try;
|
|
|
|
try = 20;
|
|
while (--try) {
|
|
|
|
if ((mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC) & MPI_DIAG_DRWE) != 0)
|
|
break;
|
|
|
|
/* Enable diagnostic registers */
|
|
mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF);
|
|
mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_1ST_KEY_VALUE);
|
|
mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_2ND_KEY_VALUE);
|
|
mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_3RD_KEY_VALUE);
|
|
mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_4TH_KEY_VALUE);
|
|
mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_5TH_KEY_VALUE);
|
|
|
|
DELAY(100000);
|
|
}
|
|
if (try == 0)
|
|
return (EIO);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
mpt_disable_diag_mode(struct mpt_softc *mpt)
|
|
{
|
|
mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFFFFFFFF);
|
|
}
|
|
|
|
/* This is a magic diagnostic reset that resets all the ARM
|
|
* processors in the chip.
|
|
*/
|
|
static void
|
|
mpt_hard_reset(struct mpt_softc *mpt)
|
|
{
|
|
int error;
|
|
int wait;
|
|
uint32_t diagreg;
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "hard reset\n");
|
|
|
|
error = mpt_enable_diag_mode(mpt);
|
|
if (error) {
|
|
mpt_prt(mpt, "WARNING - Could not enter diagnostic mode !\n");
|
|
mpt_prt(mpt, "Trying to reset anyway.\n");
|
|
}
|
|
|
|
diagreg = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC);
|
|
|
|
/*
|
|
* This appears to be a workaround required for some
|
|
* firmware or hardware revs.
|
|
*/
|
|
mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diagreg | MPI_DIAG_DISABLE_ARM);
|
|
DELAY(1000);
|
|
|
|
/* Diag. port is now active so we can now hit the reset bit */
|
|
mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diagreg | MPI_DIAG_RESET_ADAPTER);
|
|
|
|
/*
|
|
* Ensure that the reset has finished. We delay 1ms
|
|
* prior to reading the register to make sure the chip
|
|
* has sufficiently completed its reset to handle register
|
|
* accesses.
|
|
*/
|
|
wait = 5000;
|
|
do {
|
|
DELAY(1000);
|
|
diagreg = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC);
|
|
} while (--wait && (diagreg & MPI_DIAG_RESET_ADAPTER) == 0);
|
|
|
|
if (wait == 0) {
|
|
mpt_prt(mpt, "WARNING - Failed hard reset! "
|
|
"Trying to initialize anyway.\n");
|
|
}
|
|
|
|
/*
|
|
* If we have firmware to download, it must be loaded before
|
|
* the controller will become operational. Do so now.
|
|
*/
|
|
if (mpt->fw_image != NULL) {
|
|
|
|
error = mpt_download_fw(mpt);
|
|
|
|
if (error) {
|
|
mpt_prt(mpt, "WARNING - Firmware Download Failed!\n");
|
|
mpt_prt(mpt, "Trying to initialize anyway.\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reseting the controller should have disabled write
|
|
* access to the diagnostic registers, but disable
|
|
* manually to be sure.
|
|
*/
|
|
mpt_disable_diag_mode(mpt);
|
|
}
|
|
|
|
static void
|
|
mpt_core_ioc_reset(struct mpt_softc *mpt, int type)
|
|
{
|
|
/*
|
|
* Complete all pending requests with a status
|
|
* appropriate for an IOC reset.
|
|
*/
|
|
mpt_complete_request_chain(mpt, &mpt->request_pending_list,
|
|
MPI_IOCSTATUS_INVALID_STATE);
|
|
}
|
|
|
|
|
|
/*
|
|
* Reset the IOC when needed. Try software command first then if needed
|
|
* poke at the magic diagnostic reset. Note that a hard reset resets
|
|
* *both* IOCs on dual function chips (FC929 && LSI1030) as well as
|
|
* fouls up the PCI configuration registers.
|
|
*/
|
|
int
|
|
mpt_reset(struct mpt_softc *mpt, int reinit)
|
|
{
|
|
struct mpt_personality *pers;
|
|
int ret;
|
|
int retry_cnt = 0;
|
|
|
|
/*
|
|
* Try a soft reset. If that fails, get out the big hammer.
|
|
*/
|
|
again:
|
|
if ((ret = mpt_soft_reset(mpt)) != MPT_OK) {
|
|
int cnt;
|
|
for (cnt = 0; cnt < 5; cnt++) {
|
|
/* Failed; do a hard reset */
|
|
mpt_hard_reset(mpt);
|
|
|
|
/*
|
|
* Wait for the IOC to reload
|
|
* and come out of reset state
|
|
*/
|
|
ret = mpt_wait_state(mpt, MPT_DB_STATE_READY);
|
|
if (ret == MPT_OK) {
|
|
break;
|
|
}
|
|
/*
|
|
* Okay- try to check again...
|
|
*/
|
|
ret = mpt_wait_state(mpt, MPT_DB_STATE_READY);
|
|
if (ret == MPT_OK) {
|
|
break;
|
|
}
|
|
mpt_prt(mpt, "mpt_reset: failed hard reset (%d:%d)\n",
|
|
retry_cnt, cnt);
|
|
}
|
|
}
|
|
|
|
if (retry_cnt == 0) {
|
|
/*
|
|
* Invoke reset handlers. We bump the reset count so
|
|
* that mpt_wait_req() understands that regardless of
|
|
* the specified wait condition, it should stop its wait.
|
|
*/
|
|
mpt->reset_cnt++;
|
|
MPT_PERS_FOREACH(mpt, pers)
|
|
pers->reset(mpt, ret);
|
|
}
|
|
|
|
if (reinit != 0) {
|
|
ret = mpt_enable_ioc(mpt, 1);
|
|
if (ret == MPT_OK) {
|
|
mpt_enable_ints(mpt);
|
|
}
|
|
}
|
|
if (ret != MPT_OK && retry_cnt++ < 2) {
|
|
goto again;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Return a command buffer to the free queue */
|
|
void
|
|
mpt_free_request(struct mpt_softc *mpt, request_t *req)
|
|
{
|
|
request_t *nxt;
|
|
struct mpt_evtf_record *record;
|
|
uint32_t reply_baddr;
|
|
|
|
if (req == NULL || req != &mpt->request_pool[req->index]) {
|
|
panic("mpt_free_request bad req ptr\n");
|
|
return;
|
|
}
|
|
if ((nxt = req->chain) != NULL) {
|
|
req->chain = NULL;
|
|
mpt_free_request(mpt, nxt); /* NB: recursion */
|
|
}
|
|
req->serno = 0;
|
|
req->ccb = NULL;
|
|
req->state = REQ_STATE_FREE;
|
|
if (LIST_EMPTY(&mpt->ack_frames)) {
|
|
/*
|
|
* Insert free ones at the tail
|
|
*/
|
|
TAILQ_INSERT_TAIL(&mpt->request_free_list, req, links);
|
|
if (mpt->getreqwaiter != 0) {
|
|
mpt->getreqwaiter = 0;
|
|
wakeup(&mpt->request_free_list);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Process an ack frame deferred due to resource shortage.
|
|
*/
|
|
record = LIST_FIRST(&mpt->ack_frames);
|
|
LIST_REMOVE(record, links);
|
|
mpt_send_event_ack(mpt, req, &record->reply, record->context);
|
|
reply_baddr = (uint32_t)((uint8_t *)record - mpt->reply)
|
|
+ (mpt->reply_phys & 0xFFFFFFFF);
|
|
mpt_free_reply(mpt, reply_baddr);
|
|
}
|
|
|
|
/* Get a command buffer from the free queue */
|
|
request_t *
|
|
mpt_get_request(struct mpt_softc *mpt, int sleep_ok)
|
|
{
|
|
request_t *req;
|
|
|
|
retry:
|
|
req = TAILQ_FIRST(&mpt->request_free_list);
|
|
if (req != NULL) {
|
|
KASSERT(req == &mpt->request_pool[req->index],
|
|
("mpt_get_request: corrupted request free list\n"));
|
|
TAILQ_REMOVE(&mpt->request_free_list, req, links);
|
|
req->state = REQ_STATE_ALLOCATED;
|
|
req->chain = NULL;
|
|
req->serno = mpt->sequence++;
|
|
} else if (sleep_ok != 0) {
|
|
mpt->getreqwaiter = 1;
|
|
mpt_sleep(mpt, &mpt->request_free_list, PUSER, "mptgreq", 0);
|
|
goto retry;
|
|
}
|
|
return req;
|
|
}
|
|
|
|
/* Pass the command to the IOC */
|
|
void
|
|
mpt_send_cmd(struct mpt_softc *mpt, request_t *req)
|
|
{
|
|
uint32_t *pReq;
|
|
|
|
pReq = req->req_vbuf;
|
|
if (mpt->verbose > MPT_PRT_TRACE) {
|
|
int offset;
|
|
#if __FreeBSD_version >= 500000
|
|
mpt_prt(mpt, "Send Request %d (%jx):",
|
|
req->index, (uintmax_t) req->req_pbuf);
|
|
#else
|
|
mpt_prt(mpt, "Send Request %d (%llx):",
|
|
req->index, (unsigned long long) req->req_pbuf);
|
|
#endif
|
|
for (offset = 0; offset < mpt->request_frame_size; offset++) {
|
|
if ((offset & 0x7) == 0) {
|
|
mpt_prtc(mpt, "\n");
|
|
mpt_prt(mpt, " ");
|
|
}
|
|
mpt_prtc(mpt, " %08x", pReq[offset]);
|
|
}
|
|
mpt_prtc(mpt, "\n");
|
|
}
|
|
bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
req->state |= REQ_STATE_QUEUED;
|
|
TAILQ_INSERT_HEAD(&mpt->request_pending_list, req, links);
|
|
mpt_write(mpt, MPT_OFFSET_REQUEST_Q, (uint32_t) req->req_pbuf);
|
|
}
|
|
|
|
/*
|
|
* Wait for a request to complete.
|
|
*
|
|
* Inputs:
|
|
* mpt softc of controller executing request
|
|
* req request to wait for
|
|
* sleep_ok nonzero implies may sleep in this context
|
|
* time_ms timeout in ms. 0 implies no timeout.
|
|
*
|
|
* Return Values:
|
|
* 0 Request completed
|
|
* non-0 Timeout fired before request completion.
|
|
*/
|
|
int
|
|
mpt_wait_req(struct mpt_softc *mpt, request_t *req,
|
|
mpt_req_state_t state, mpt_req_state_t mask,
|
|
int sleep_ok, int time_ms)
|
|
{
|
|
int error;
|
|
int timeout;
|
|
u_int saved_cnt;
|
|
|
|
/*
|
|
* timeout is in ms. 0 indicates infinite wait.
|
|
* Convert to ticks or 500us units depending on
|
|
* our sleep mode.
|
|
*/
|
|
if (sleep_ok != 0) {
|
|
timeout = (time_ms * hz) / 1000;
|
|
} else {
|
|
timeout = time_ms * 2;
|
|
}
|
|
req->state |= REQ_STATE_NEED_WAKEUP;
|
|
mask &= ~REQ_STATE_NEED_WAKEUP;
|
|
saved_cnt = mpt->reset_cnt;
|
|
while ((req->state & mask) != state && mpt->reset_cnt == saved_cnt) {
|
|
if (sleep_ok != 0) {
|
|
error = mpt_sleep(mpt, req, PUSER, "mptreq", timeout);
|
|
if (error == EWOULDBLOCK) {
|
|
timeout = 0;
|
|
break;
|
|
}
|
|
} else {
|
|
if (time_ms != 0 && --timeout == 0) {
|
|
break;
|
|
}
|
|
DELAY(500);
|
|
mpt_intr(mpt);
|
|
}
|
|
}
|
|
req->state &= ~REQ_STATE_NEED_WAKEUP;
|
|
if (mpt->reset_cnt != saved_cnt) {
|
|
return (EIO);
|
|
}
|
|
if (time_ms && timeout <= 0) {
|
|
MSG_REQUEST_HEADER *msg_hdr = req->req_vbuf;
|
|
mpt_prt(mpt, "mpt_wait_req(%x) timed out\n", msg_hdr->Function);
|
|
return (ETIMEDOUT);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Send a command to the IOC via the handshake register.
|
|
*
|
|
* Only done at initialization time and for certain unusual
|
|
* commands such as device/bus reset as specified by LSI.
|
|
*/
|
|
int
|
|
mpt_send_handshake_cmd(struct mpt_softc *mpt, size_t len, void *cmd)
|
|
{
|
|
int i;
|
|
uint32_t data, *data32;
|
|
|
|
/* Check condition of the IOC */
|
|
data = mpt_rd_db(mpt);
|
|
if ((MPT_STATE(data) != MPT_DB_STATE_READY
|
|
&& MPT_STATE(data) != MPT_DB_STATE_RUNNING
|
|
&& MPT_STATE(data) != MPT_DB_STATE_FAULT)
|
|
|| MPT_DB_IS_IN_USE(data)) {
|
|
mpt_prt(mpt, "handshake aborted - invalid doorbell state\n");
|
|
mpt_print_db(data);
|
|
return (EBUSY);
|
|
}
|
|
|
|
/* We move things in 32 bit chunks */
|
|
len = (len + 3) >> 2;
|
|
data32 = cmd;
|
|
|
|
/* Clear any left over pending doorbell interupts */
|
|
if (MPT_DB_INTR(mpt_rd_intr(mpt)))
|
|
mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
|
|
|
|
/*
|
|
* Tell the handshake reg. we are going to send a command
|
|
* and how long it is going to be.
|
|
*/
|
|
data = (MPI_FUNCTION_HANDSHAKE << MPI_DOORBELL_FUNCTION_SHIFT) |
|
|
(len << MPI_DOORBELL_ADD_DWORDS_SHIFT);
|
|
mpt_write(mpt, MPT_OFFSET_DOORBELL, data);
|
|
|
|
/* Wait for the chip to notice */
|
|
if (mpt_wait_db_int(mpt) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_send_handshake_cmd timeout1\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
/* Clear the interrupt */
|
|
mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
|
|
|
|
if (mpt_wait_db_ack(mpt) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_send_handshake_cmd timeout2\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
/* Send the command */
|
|
for (i = 0; i < len; i++) {
|
|
mpt_write(mpt, MPT_OFFSET_DOORBELL, *data32++);
|
|
if (mpt_wait_db_ack(mpt) != MPT_OK) {
|
|
mpt_prt(mpt,
|
|
"mpt_send_handshake_cmd timeout! index = %d\n",
|
|
i);
|
|
return (ETIMEDOUT);
|
|
}
|
|
}
|
|
return MPT_OK;
|
|
}
|
|
|
|
/* Get the response from the handshake register */
|
|
int
|
|
mpt_recv_handshake_reply(struct mpt_softc *mpt, size_t reply_len, void *reply)
|
|
{
|
|
int left, reply_left;
|
|
u_int16_t *data16;
|
|
MSG_DEFAULT_REPLY *hdr;
|
|
|
|
/* We move things out in 16 bit chunks */
|
|
reply_len >>= 1;
|
|
data16 = (u_int16_t *)reply;
|
|
|
|
hdr = (MSG_DEFAULT_REPLY *)reply;
|
|
|
|
/* Get first word */
|
|
if (mpt_wait_db_int(mpt) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_recv_handshake_cmd timeout1\n");
|
|
return ETIMEDOUT;
|
|
}
|
|
*data16++ = mpt_read(mpt, MPT_OFFSET_DOORBELL) & MPT_DB_DATA_MASK;
|
|
mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
|
|
|
|
/* Get Second Word */
|
|
if (mpt_wait_db_int(mpt) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_recv_handshake_cmd timeout2\n");
|
|
return ETIMEDOUT;
|
|
}
|
|
*data16++ = mpt_read(mpt, MPT_OFFSET_DOORBELL) & MPT_DB_DATA_MASK;
|
|
mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
|
|
|
|
/* With the second word, we can now look at the length */
|
|
if (((reply_len >> 1) != hdr->MsgLength)) {
|
|
mpt_prt(mpt, "reply length does not match message length: "
|
|
"got 0x%02x, expected 0x%02x\n",
|
|
hdr->MsgLength << 2, reply_len << 1);
|
|
}
|
|
|
|
/* Get rest of the reply; but don't overflow the provided buffer */
|
|
left = (hdr->MsgLength << 1) - 2;
|
|
reply_left = reply_len - 2;
|
|
while (left--) {
|
|
u_int16_t datum;
|
|
|
|
if (mpt_wait_db_int(mpt) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_recv_handshake_cmd timeout3\n");
|
|
return ETIMEDOUT;
|
|
}
|
|
datum = mpt_read(mpt, MPT_OFFSET_DOORBELL);
|
|
|
|
if (reply_left-- > 0)
|
|
*data16++ = datum & MPT_DB_DATA_MASK;
|
|
|
|
mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
|
|
}
|
|
|
|
/* One more wait & clear at the end */
|
|
if (mpt_wait_db_int(mpt) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_recv_handshake_cmd timeout4\n");
|
|
return ETIMEDOUT;
|
|
}
|
|
mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
|
|
|
|
if ((hdr->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
|
|
if (mpt->verbose >= MPT_PRT_TRACE)
|
|
mpt_print_reply(hdr);
|
|
return (MPT_FAIL | hdr->IOCStatus);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mpt_get_iocfacts(struct mpt_softc *mpt, MSG_IOC_FACTS_REPLY *freplp)
|
|
{
|
|
MSG_IOC_FACTS f_req;
|
|
int error;
|
|
|
|
bzero(&f_req, sizeof f_req);
|
|
f_req.Function = MPI_FUNCTION_IOC_FACTS;
|
|
f_req.MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE);
|
|
error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req);
|
|
if (error)
|
|
return(error);
|
|
error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
mpt_get_portfacts(struct mpt_softc *mpt, MSG_PORT_FACTS_REPLY *freplp)
|
|
{
|
|
MSG_PORT_FACTS f_req;
|
|
int error;
|
|
|
|
/* XXX: Only getting PORT FACTS for Port 0 */
|
|
memset(&f_req, 0, sizeof f_req);
|
|
f_req.Function = MPI_FUNCTION_PORT_FACTS;
|
|
f_req.MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE);
|
|
error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req);
|
|
if (error)
|
|
return(error);
|
|
error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Send the initialization request. This is where we specify how many
|
|
* SCSI busses and how many devices per bus we wish to emulate.
|
|
* This is also the command that specifies the max size of the reply
|
|
* frames from the IOC that we will be allocating.
|
|
*/
|
|
static int
|
|
mpt_send_ioc_init(struct mpt_softc *mpt, uint32_t who)
|
|
{
|
|
int error = 0;
|
|
MSG_IOC_INIT init;
|
|
MSG_IOC_INIT_REPLY reply;
|
|
|
|
bzero(&init, sizeof init);
|
|
init.WhoInit = who;
|
|
init.Function = MPI_FUNCTION_IOC_INIT;
|
|
if (mpt->is_fc) {
|
|
init.MaxDevices = 255;
|
|
} else if (mpt->is_sas) {
|
|
init.MaxDevices = mpt->mpt_max_devices;
|
|
} else {
|
|
init.MaxDevices = 16;
|
|
}
|
|
init.MaxBuses = 1;
|
|
|
|
init.MsgVersion = htole16(MPI_VERSION);
|
|
init.HeaderVersion = htole16(MPI_HEADER_VERSION);
|
|
init.ReplyFrameSize = htole16(MPT_REPLY_SIZE);
|
|
init.MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE);
|
|
|
|
if ((error = mpt_send_handshake_cmd(mpt, sizeof init, &init)) != 0) {
|
|
return(error);
|
|
}
|
|
|
|
error = mpt_recv_handshake_reply(mpt, sizeof reply, &reply);
|
|
return (error);
|
|
}
|
|
|
|
|
|
/*
|
|
* Utiltity routine to read configuration headers and pages
|
|
*/
|
|
int
|
|
mpt_issue_cfg_req(struct mpt_softc *mpt, request_t *req, u_int Action,
|
|
u_int PageVersion, u_int PageLength, u_int PageNumber,
|
|
u_int PageType, uint32_t PageAddress, bus_addr_t addr,
|
|
bus_size_t len, int sleep_ok, int timeout_ms)
|
|
{
|
|
MSG_CONFIG *cfgp;
|
|
SGE_SIMPLE32 *se;
|
|
|
|
cfgp = req->req_vbuf;
|
|
memset(cfgp, 0, sizeof *cfgp);
|
|
cfgp->Action = Action;
|
|
cfgp->Function = MPI_FUNCTION_CONFIG;
|
|
cfgp->Header.PageVersion = PageVersion;
|
|
cfgp->Header.PageLength = PageLength;
|
|
cfgp->Header.PageNumber = PageNumber;
|
|
cfgp->Header.PageType = PageType;
|
|
cfgp->PageAddress = PageAddress;
|
|
se = (SGE_SIMPLE32 *)&cfgp->PageBufferSGE;
|
|
se->Address = addr;
|
|
MPI_pSGE_SET_LENGTH(se, len);
|
|
MPI_pSGE_SET_FLAGS(se, (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
|
|
MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
|
|
MPI_SGE_FLAGS_END_OF_LIST |
|
|
((Action == MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT
|
|
|| Action == MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM)
|
|
? MPI_SGE_FLAGS_HOST_TO_IOC : MPI_SGE_FLAGS_IOC_TO_HOST)));
|
|
cfgp->MsgContext = htole32(req->index | MPT_REPLY_HANDLER_CONFIG);
|
|
|
|
mpt_check_doorbell(mpt);
|
|
mpt_send_cmd(mpt, req);
|
|
return (mpt_wait_req(mpt, req, REQ_STATE_DONE, REQ_STATE_DONE,
|
|
sleep_ok, timeout_ms));
|
|
}
|
|
|
|
|
|
int
|
|
mpt_read_cfg_header(struct mpt_softc *mpt, int PageType, int PageNumber,
|
|
uint32_t PageAddress, CONFIG_PAGE_HEADER *rslt,
|
|
int sleep_ok, int timeout_ms)
|
|
{
|
|
request_t *req;
|
|
MSG_CONFIG *cfgp;
|
|
int error;
|
|
|
|
req = mpt_get_request(mpt, sleep_ok);
|
|
if (req == NULL) {
|
|
mpt_prt(mpt, "mpt_read_cfg_header: Get request failed!\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
error = mpt_issue_cfg_req(mpt, req, MPI_CONFIG_ACTION_PAGE_HEADER,
|
|
/*PageVersion*/0, /*PageLength*/0, PageNumber,
|
|
PageType, PageAddress, /*addr*/0, /*len*/0,
|
|
sleep_ok, timeout_ms);
|
|
if (error != 0) {
|
|
mpt_free_request(mpt, req);
|
|
mpt_prt(mpt, "read_cfg_header timed out\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
switch (req->IOCStatus & MPI_IOCSTATUS_MASK) {
|
|
case MPI_IOCSTATUS_SUCCESS:
|
|
cfgp = req->req_vbuf;
|
|
bcopy(&cfgp->Header, rslt, sizeof(*rslt));
|
|
error = 0;
|
|
break;
|
|
case MPI_IOCSTATUS_CONFIG_INVALID_PAGE:
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"Invalid Page Type %d Number %d Addr 0x%0x\n",
|
|
PageType, PageNumber, PageAddress);
|
|
error = EINVAL;
|
|
break;
|
|
default:
|
|
mpt_prt(mpt, "mpt_read_cfg_header: Config Info Status %x\n",
|
|
req->IOCStatus);
|
|
error = EIO;
|
|
break;
|
|
}
|
|
mpt_free_request(mpt, req);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
mpt_read_cfg_page(struct mpt_softc *mpt, int Action, uint32_t PageAddress,
|
|
CONFIG_PAGE_HEADER *hdr, size_t len, int sleep_ok,
|
|
int timeout_ms)
|
|
{
|
|
request_t *req;
|
|
int error;
|
|
|
|
req = mpt_get_request(mpt, sleep_ok);
|
|
if (req == NULL) {
|
|
mpt_prt(mpt, "mpt_read_cfg_page: Get request failed!\n");
|
|
return (-1);
|
|
}
|
|
|
|
error = mpt_issue_cfg_req(mpt, req, Action, hdr->PageVersion,
|
|
hdr->PageLength, hdr->PageNumber,
|
|
hdr->PageType & MPI_CONFIG_PAGETYPE_MASK,
|
|
PageAddress, req->req_pbuf + MPT_RQSL(mpt),
|
|
len, sleep_ok, timeout_ms);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "read_cfg_page(%d) timed out\n", Action);
|
|
return (-1);
|
|
}
|
|
|
|
if ((req->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
|
|
mpt_prt(mpt, "mpt_read_cfg_page: Config Info Status %x\n",
|
|
req->IOCStatus);
|
|
mpt_free_request(mpt, req);
|
|
return (-1);
|
|
}
|
|
bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
memcpy(hdr, ((uint8_t *)req->req_vbuf)+MPT_RQSL(mpt), len);
|
|
mpt_free_request(mpt, req);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_write_cfg_page(struct mpt_softc *mpt, int Action, uint32_t PageAddress,
|
|
CONFIG_PAGE_HEADER *hdr, size_t len, int sleep_ok,
|
|
int timeout_ms)
|
|
{
|
|
request_t *req;
|
|
u_int hdr_attr;
|
|
int error;
|
|
|
|
hdr_attr = hdr->PageType & MPI_CONFIG_PAGEATTR_MASK;
|
|
if (hdr_attr != MPI_CONFIG_PAGEATTR_CHANGEABLE &&
|
|
hdr_attr != MPI_CONFIG_PAGEATTR_PERSISTENT) {
|
|
mpt_prt(mpt, "page type 0x%x not changeable\n",
|
|
hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
|
|
return (-1);
|
|
}
|
|
hdr->PageType &= MPI_CONFIG_PAGETYPE_MASK,
|
|
|
|
req = mpt_get_request(mpt, sleep_ok);
|
|
if (req == NULL)
|
|
return (-1);
|
|
|
|
memcpy(((caddr_t)req->req_vbuf)+MPT_RQSL(mpt), hdr, len);
|
|
/* Restore stripped out attributes */
|
|
hdr->PageType |= hdr_attr;
|
|
|
|
error = mpt_issue_cfg_req(mpt, req, Action, hdr->PageVersion,
|
|
hdr->PageLength, hdr->PageNumber,
|
|
hdr->PageType & MPI_CONFIG_PAGETYPE_MASK,
|
|
PageAddress, req->req_pbuf + MPT_RQSL(mpt),
|
|
len, sleep_ok, timeout_ms);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "mpt_write_cfg_page timed out\n");
|
|
return (-1);
|
|
}
|
|
|
|
if ((req->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
|
|
mpt_prt(mpt, "mpt_write_cfg_page: Config Info Status %x\n",
|
|
req->IOCStatus);
|
|
mpt_free_request(mpt, req);
|
|
return (-1);
|
|
}
|
|
mpt_free_request(mpt, req);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Read IOC configuration information
|
|
*/
|
|
static int
|
|
mpt_read_config_info_ioc(struct mpt_softc *mpt)
|
|
{
|
|
CONFIG_PAGE_HEADER hdr;
|
|
struct mpt_raid_volume *mpt_raid;
|
|
int rv;
|
|
int i;
|
|
size_t len;
|
|
|
|
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IOC,
|
|
/*PageNumber*/2, /*PageAddress*/0, &hdr,
|
|
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
|
|
/*
|
|
* If it's an invalid page, so what? Not a supported function....
|
|
*/
|
|
if (rv == EINVAL)
|
|
return (0);
|
|
if (rv)
|
|
return (rv);
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "IOC Page 2 Header: ver %x, len %x, "
|
|
"num %x, type %x\n", hdr.PageVersion,
|
|
hdr.PageLength * sizeof(uint32_t),
|
|
hdr.PageNumber, hdr.PageType);
|
|
|
|
len = hdr.PageLength * sizeof(uint32_t);
|
|
mpt->ioc_page2 = malloc(len, M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (mpt->ioc_page2 == NULL)
|
|
return (ENOMEM);
|
|
memcpy(&mpt->ioc_page2->Header, &hdr, sizeof(hdr));
|
|
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
|
|
&mpt->ioc_page2->Header, len,
|
|
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
|
|
if (rv) {
|
|
mpt_prt(mpt, "failed to read IOC Page 2\n");
|
|
} else if (mpt->ioc_page2->CapabilitiesFlags != 0) {
|
|
uint32_t mask;
|
|
|
|
mpt_prt(mpt, "Capabilities: (");
|
|
for (mask = 1; mask != 0; mask <<= 1) {
|
|
if ((mpt->ioc_page2->CapabilitiesFlags & mask) == 0)
|
|
continue;
|
|
|
|
switch (mask) {
|
|
case MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT:
|
|
mpt_prtc(mpt, " RAID-0");
|
|
break;
|
|
case MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT:
|
|
mpt_prtc(mpt, " RAID-1E");
|
|
break;
|
|
case MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT:
|
|
mpt_prtc(mpt, " RAID-1");
|
|
break;
|
|
case MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT:
|
|
mpt_prtc(mpt, " SES");
|
|
break;
|
|
case MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT:
|
|
mpt_prtc(mpt, " SAFTE");
|
|
break;
|
|
case MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT:
|
|
mpt_prtc(mpt, " Multi-Channel-Arrays");
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
mpt_prtc(mpt, " )\n");
|
|
if ((mpt->ioc_page2->CapabilitiesFlags
|
|
& (MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT
|
|
| MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT
|
|
| MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT)) != 0) {
|
|
mpt_prt(mpt, "%d Active Volume%s(%d Max)\n",
|
|
mpt->ioc_page2->NumActiveVolumes,
|
|
mpt->ioc_page2->NumActiveVolumes != 1
|
|
? "s " : " ",
|
|
mpt->ioc_page2->MaxVolumes);
|
|
mpt_prt(mpt, "%d Hidden Drive Member%s(%d Max)\n",
|
|
mpt->ioc_page2->NumActivePhysDisks,
|
|
mpt->ioc_page2->NumActivePhysDisks != 1
|
|
? "s " : " ",
|
|
mpt->ioc_page2->MaxPhysDisks);
|
|
}
|
|
}
|
|
|
|
len = mpt->ioc_page2->MaxVolumes * sizeof(struct mpt_raid_volume);
|
|
mpt->raid_volumes = malloc(len, M_DEVBUF, M_NOWAIT);
|
|
if (mpt->raid_volumes == NULL) {
|
|
mpt_prt(mpt, "Could not allocate RAID volume data\n");
|
|
} else {
|
|
memset(mpt->raid_volumes, 0, len);
|
|
}
|
|
|
|
/*
|
|
* Copy critical data out of ioc_page2 so that we can
|
|
* safely refresh the page without windows of unreliable
|
|
* data.
|
|
*/
|
|
mpt->raid_max_volumes = mpt->ioc_page2->MaxVolumes;
|
|
|
|
len = sizeof(*mpt->raid_volumes->config_page)
|
|
+ (sizeof(RAID_VOL0_PHYS_DISK)*(mpt->ioc_page2->MaxPhysDisks - 1));
|
|
for (i = 0; i < mpt->ioc_page2->MaxVolumes; i++) {
|
|
mpt_raid = &mpt->raid_volumes[i];
|
|
mpt_raid->config_page = malloc(len, M_DEVBUF, M_NOWAIT);
|
|
if (mpt_raid->config_page == NULL) {
|
|
mpt_prt(mpt, "Could not allocate RAID page data\n");
|
|
break;
|
|
}
|
|
memset(mpt_raid->config_page, 0, len);
|
|
}
|
|
mpt->raid_page0_len = len;
|
|
|
|
len = mpt->ioc_page2->MaxPhysDisks * sizeof(struct mpt_raid_disk);
|
|
mpt->raid_disks = malloc(len, M_DEVBUF, M_NOWAIT);
|
|
if (mpt->raid_disks == NULL) {
|
|
mpt_prt(mpt, "Could not allocate RAID disk data\n");
|
|
} else {
|
|
memset(mpt->raid_disks, 0, len);
|
|
}
|
|
|
|
mpt->raid_max_disks = mpt->ioc_page2->MaxPhysDisks;
|
|
|
|
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IOC,
|
|
/*PageNumber*/3, /*PageAddress*/0, &hdr,
|
|
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
|
|
if (rv)
|
|
return (EIO);
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "IOC Page 3 Header: %x %x %x %x\n",
|
|
hdr.PageVersion, hdr.PageLength, hdr.PageNumber, hdr.PageType);
|
|
|
|
if (mpt->ioc_page3 != NULL)
|
|
free(mpt->ioc_page3, M_DEVBUF);
|
|
len = hdr.PageLength * sizeof(uint32_t);
|
|
mpt->ioc_page3 = malloc(len, M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (mpt->ioc_page3 == NULL)
|
|
return (-1);
|
|
memcpy(&mpt->ioc_page3->Header, &hdr, sizeof(hdr));
|
|
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
|
|
&mpt->ioc_page3->Header, len,
|
|
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
|
|
if (rv) {
|
|
mpt_prt(mpt, "failed to read IOC Page 3\n");
|
|
}
|
|
|
|
mpt_raid_wakeup(mpt);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Enable IOC port
|
|
*/
|
|
static int
|
|
mpt_send_port_enable(struct mpt_softc *mpt, int port)
|
|
{
|
|
request_t *req;
|
|
MSG_PORT_ENABLE *enable_req;
|
|
int error;
|
|
|
|
req = mpt_get_request(mpt, /*sleep_ok*/FALSE);
|
|
if (req == NULL)
|
|
return (-1);
|
|
|
|
enable_req = req->req_vbuf;
|
|
bzero(enable_req, MPT_RQSL(mpt));
|
|
|
|
enable_req->Function = MPI_FUNCTION_PORT_ENABLE;
|
|
enable_req->MsgContext = htole32(req->index | MPT_REPLY_HANDLER_CONFIG);
|
|
enable_req->PortNumber = port;
|
|
|
|
mpt_check_doorbell(mpt);
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "enabling port %d\n", port);
|
|
|
|
mpt_send_cmd(mpt, req);
|
|
error = mpt_wait_req(mpt, req, REQ_STATE_DONE, REQ_STATE_DONE,
|
|
/*sleep_ok*/FALSE,
|
|
/*time_ms*/(mpt->is_sas || mpt->is_fc)? 30000 : 3000);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "port %d enable timed out\n", port);
|
|
return (-1);
|
|
}
|
|
mpt_free_request(mpt, req);
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "enabled port %d\n", port);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Enable/Disable asynchronous event reporting.
|
|
*
|
|
* NB: this is the first command we send via shared memory
|
|
* instead of the handshake register.
|
|
*/
|
|
static int
|
|
mpt_send_event_request(struct mpt_softc *mpt, int onoff)
|
|
{
|
|
request_t *req;
|
|
MSG_EVENT_NOTIFY *enable_req;
|
|
|
|
req = mpt_get_request(mpt, /*sleep_ok*/FALSE);
|
|
|
|
enable_req = req->req_vbuf;
|
|
bzero(enable_req, sizeof *enable_req);
|
|
|
|
enable_req->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
|
|
enable_req->MsgContext = htole32(req->index | MPT_REPLY_HANDLER_EVENTS);
|
|
enable_req->Switch = onoff;
|
|
|
|
mpt_check_doorbell(mpt);
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"%sabling async events\n", onoff ? "en" : "dis");
|
|
mpt_send_cmd(mpt, req);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Un-mask the interupts on the chip.
|
|
*/
|
|
void
|
|
mpt_enable_ints(struct mpt_softc *mpt)
|
|
{
|
|
/* Unmask every thing except door bell int */
|
|
mpt_write(mpt, MPT_OFFSET_INTR_MASK, MPT_INTR_DB_MASK);
|
|
}
|
|
|
|
/*
|
|
* Mask the interupts on the chip.
|
|
*/
|
|
void
|
|
mpt_disable_ints(struct mpt_softc *mpt)
|
|
{
|
|
/* Mask all interrupts */
|
|
mpt_write(mpt, MPT_OFFSET_INTR_MASK,
|
|
MPT_INTR_REPLY_MASK | MPT_INTR_DB_MASK);
|
|
}
|
|
|
|
static void
|
|
mpt_sysctl_attach(struct mpt_softc *mpt)
|
|
{
|
|
#if __FreeBSD_version >= 500000
|
|
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(mpt->dev);
|
|
struct sysctl_oid *tree = device_get_sysctl_tree(mpt->dev);
|
|
|
|
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
|
|
"debug", CTLFLAG_RW, &mpt->verbose, 0,
|
|
"Debugging/Verbose level");
|
|
#endif
|
|
}
|
|
|
|
int
|
|
mpt_attach(struct mpt_softc *mpt)
|
|
{
|
|
struct mpt_personality *pers;
|
|
int i;
|
|
int error;
|
|
|
|
for (i = 0; i < MPT_MAX_PERSONALITIES; i++) {
|
|
pers = mpt_personalities[i];
|
|
if (pers == NULL) {
|
|
continue;
|
|
}
|
|
if (pers->probe(mpt) == 0) {
|
|
error = pers->attach(mpt);
|
|
if (error != 0) {
|
|
mpt_detach(mpt);
|
|
return (error);
|
|
}
|
|
mpt->mpt_pers_mask |= (0x1 << pers->id);
|
|
pers->use_count++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Now that we've attached everything, do the enable function
|
|
* for all of the personalities. This allows the personalities
|
|
* to do setups that are appropriate for them prior to enabling
|
|
* any ports.
|
|
*/
|
|
for (i = 0; i < MPT_MAX_PERSONALITIES; i++) {
|
|
pers = mpt_personalities[i];
|
|
if (pers != NULL && MPT_PERS_ATTACHED(pers, mpt) != 0) {
|
|
error = pers->enable(mpt);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "personality %s attached but would"
|
|
" not enable (%d)\n", pers->name, error);
|
|
mpt_detach(mpt);
|
|
return (error);
|
|
}
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_shutdown(struct mpt_softc *mpt)
|
|
{
|
|
struct mpt_personality *pers;
|
|
|
|
MPT_PERS_FOREACH_REVERSE(mpt, pers) {
|
|
pers->shutdown(mpt);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_detach(struct mpt_softc *mpt)
|
|
{
|
|
struct mpt_personality *pers;
|
|
|
|
MPT_PERS_FOREACH_REVERSE(mpt, pers) {
|
|
pers->detach(mpt);
|
|
mpt->mpt_pers_mask &= ~(0x1 << pers->id);
|
|
pers->use_count--;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mpt_core_load(struct mpt_personality *pers)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Setup core handlers and insert the default handler
|
|
* into all "empty slots".
|
|
*/
|
|
for (i = 0; i < MPT_NUM_REPLY_HANDLERS; i++) {
|
|
mpt_reply_handlers[i] = mpt_default_reply_handler;
|
|
}
|
|
|
|
mpt_reply_handlers[MPT_CBI(MPT_REPLY_HANDLER_EVENTS)] =
|
|
mpt_event_reply_handler;
|
|
mpt_reply_handlers[MPT_CBI(MPT_REPLY_HANDLER_CONFIG)] =
|
|
mpt_config_reply_handler;
|
|
mpt_reply_handlers[MPT_CBI(MPT_REPLY_HANDLER_HANDSHAKE)] =
|
|
mpt_handshake_reply_handler;
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize per-instance driver data and perform
|
|
* initial controller configuration.
|
|
*/
|
|
int
|
|
mpt_core_attach(struct mpt_softc *mpt)
|
|
{
|
|
int val;
|
|
int error;
|
|
|
|
|
|
LIST_INIT(&mpt->ack_frames);
|
|
|
|
/* Put all request buffers on the free list */
|
|
TAILQ_INIT(&mpt->request_pending_list);
|
|
TAILQ_INIT(&mpt->request_free_list);
|
|
for (val = 0; val < MPT_MAX_REQUESTS(mpt); val++) {
|
|
mpt_free_request(mpt, &mpt->request_pool[val]);
|
|
}
|
|
|
|
for (val = 0; val < MPT_MAX_LUNS; val++) {
|
|
STAILQ_INIT(&mpt->trt[val].atios);
|
|
STAILQ_INIT(&mpt->trt[val].inots);
|
|
}
|
|
STAILQ_INIT(&mpt->trt_wildcard.atios);
|
|
STAILQ_INIT(&mpt->trt_wildcard.inots);
|
|
|
|
mpt->scsi_tgt_handler_id = MPT_HANDLER_ID_NONE;
|
|
|
|
mpt_sysctl_attach(mpt);
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "doorbell req = %s\n",
|
|
mpt_ioc_diag(mpt_read(mpt, MPT_OFFSET_DOORBELL)));
|
|
|
|
error = mpt_configure_ioc(mpt);
|
|
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
mpt_core_enable(struct mpt_softc *mpt)
|
|
{
|
|
/*
|
|
* We enter with the IOC enabled, but async events
|
|
* not enabled, ports not enabled and interrupts
|
|
* not enabled.
|
|
*/
|
|
|
|
/*
|
|
* Enable asynchronous event reporting- all personalities
|
|
* have attached so that they should be able to now field
|
|
* async events.
|
|
*/
|
|
mpt_send_event_request(mpt, 1);
|
|
|
|
/*
|
|
* Catch any pending interrupts
|
|
*
|
|
* This seems to be crucial- otherwise
|
|
* the portenable below times out.
|
|
*/
|
|
mpt_intr(mpt);
|
|
|
|
/*
|
|
* Enable Interrupts
|
|
*/
|
|
mpt_enable_ints(mpt);
|
|
|
|
/*
|
|
* Catch any pending interrupts
|
|
*
|
|
* This seems to be crucial- otherwise
|
|
* the portenable below times out.
|
|
*/
|
|
mpt_intr(mpt);
|
|
|
|
/*
|
|
* Enable the port- but only if we are not MPT_ROLE_NONE.
|
|
*/
|
|
if (mpt_send_port_enable(mpt, 0) != MPT_OK) {
|
|
mpt_prt(mpt, "failed to enable port 0\n");
|
|
return (ENXIO);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
mpt_core_shutdown(struct mpt_softc *mpt)
|
|
{
|
|
mpt_disable_ints(mpt);
|
|
}
|
|
|
|
void
|
|
mpt_core_detach(struct mpt_softc *mpt)
|
|
{
|
|
mpt_disable_ints(mpt);
|
|
}
|
|
|
|
int
|
|
mpt_core_unload(struct mpt_personality *pers)
|
|
{
|
|
/* Unload is always successfull. */
|
|
return (0);
|
|
}
|
|
|
|
#define FW_UPLOAD_REQ_SIZE \
|
|
(sizeof(MSG_FW_UPLOAD) - sizeof(SGE_MPI_UNION) \
|
|
+ sizeof(FW_UPLOAD_TCSGE) + sizeof(SGE_SIMPLE32))
|
|
|
|
static int
|
|
mpt_upload_fw(struct mpt_softc *mpt)
|
|
{
|
|
uint8_t fw_req_buf[FW_UPLOAD_REQ_SIZE];
|
|
MSG_FW_UPLOAD_REPLY fw_reply;
|
|
MSG_FW_UPLOAD *fw_req;
|
|
FW_UPLOAD_TCSGE *tsge;
|
|
SGE_SIMPLE32 *sge;
|
|
uint32_t flags;
|
|
int error;
|
|
|
|
memset(&fw_req_buf, 0, sizeof(fw_req_buf));
|
|
fw_req = (MSG_FW_UPLOAD *)fw_req_buf;
|
|
fw_req->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
|
|
fw_req->Function = MPI_FUNCTION_FW_UPLOAD;
|
|
fw_req->MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE);
|
|
tsge = (FW_UPLOAD_TCSGE *)&fw_req->SGL;
|
|
tsge->DetailsLength = 12;
|
|
tsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
|
|
tsge->ImageSize = htole32(mpt->fw_image_size);
|
|
sge = (SGE_SIMPLE32 *)(tsge + 1);
|
|
flags = (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER
|
|
| MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_SIMPLE_ELEMENT
|
|
| MPI_SGE_FLAGS_32_BIT_ADDRESSING | MPI_SGE_FLAGS_IOC_TO_HOST);
|
|
flags <<= MPI_SGE_FLAGS_SHIFT;
|
|
sge->FlagsLength = htole32(flags | mpt->fw_image_size);
|
|
sge->Address = htole32(mpt->fw_phys);
|
|
error = mpt_send_handshake_cmd(mpt, sizeof(fw_req_buf), &fw_req_buf);
|
|
if (error)
|
|
return(error);
|
|
error = mpt_recv_handshake_reply(mpt, sizeof(fw_reply), &fw_reply);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
mpt_diag_outsl(struct mpt_softc *mpt, uint32_t addr,
|
|
uint32_t *data, bus_size_t len)
|
|
{
|
|
uint32_t *data_end;
|
|
|
|
data_end = data + (roundup2(len, sizeof(uint32_t)) / 4);
|
|
pci_enable_io(mpt->dev, SYS_RES_IOPORT);
|
|
mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, addr);
|
|
while (data != data_end) {
|
|
mpt_pio_write(mpt, MPT_OFFSET_DIAG_DATA, *data);
|
|
data++;
|
|
}
|
|
pci_disable_io(mpt->dev, SYS_RES_IOPORT);
|
|
}
|
|
|
|
static int
|
|
mpt_download_fw(struct mpt_softc *mpt)
|
|
{
|
|
MpiFwHeader_t *fw_hdr;
|
|
int error;
|
|
uint32_t ext_offset;
|
|
uint32_t data;
|
|
|
|
mpt_prt(mpt, "Downloading Firmware - Image Size %d\n",
|
|
mpt->fw_image_size);
|
|
|
|
error = mpt_enable_diag_mode(mpt);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "Could not enter diagnostic mode!\n");
|
|
return (EIO);
|
|
}
|
|
|
|
mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC,
|
|
MPI_DIAG_RW_ENABLE|MPI_DIAG_DISABLE_ARM);
|
|
|
|
fw_hdr = (MpiFwHeader_t *)mpt->fw_image;
|
|
mpt_diag_outsl(mpt, fw_hdr->LoadStartAddress, (uint32_t*)fw_hdr,
|
|
fw_hdr->ImageSize);
|
|
|
|
ext_offset = fw_hdr->NextImageHeaderOffset;
|
|
while (ext_offset != 0) {
|
|
MpiExtImageHeader_t *ext;
|
|
|
|
ext = (MpiExtImageHeader_t *)((uintptr_t)fw_hdr + ext_offset);
|
|
ext_offset = ext->NextImageHeaderOffset;
|
|
|
|
mpt_diag_outsl(mpt, ext->LoadStartAddress, (uint32_t*)ext,
|
|
ext->ImageSize);
|
|
}
|
|
|
|
pci_enable_io(mpt->dev, SYS_RES_IOPORT);
|
|
/* Setup the address to jump to on reset. */
|
|
mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, fw_hdr->IopResetRegAddr);
|
|
mpt_pio_write(mpt, MPT_OFFSET_DIAG_DATA, fw_hdr->IopResetVectorValue);
|
|
|
|
/*
|
|
* The controller sets the "flash bad" status after attempting
|
|
* to auto-boot from flash. Clear the status so that the controller
|
|
* will continue the boot process with our newly installed firmware.
|
|
*/
|
|
mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, MPT_DIAG_MEM_CFG_BASE);
|
|
data = mpt_pio_read(mpt, MPT_OFFSET_DIAG_DATA) | MPT_DIAG_MEM_CFG_BADFL;
|
|
mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, MPT_DIAG_MEM_CFG_BASE);
|
|
mpt_pio_write(mpt, MPT_OFFSET_DIAG_DATA, data);
|
|
|
|
pci_disable_io(mpt->dev, SYS_RES_IOPORT);
|
|
|
|
/*
|
|
* Re-enable the processor and clear the boot halt flag.
|
|
*/
|
|
data = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC);
|
|
data &= ~(MPI_DIAG_PREVENT_IOC_BOOT|MPI_DIAG_DISABLE_ARM);
|
|
mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, data);
|
|
|
|
mpt_disable_diag_mode(mpt);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Allocate/Initialize data structures for the controller. Called
|
|
* once at instance startup.
|
|
*/
|
|
static int
|
|
mpt_configure_ioc(struct mpt_softc *mpt)
|
|
{
|
|
MSG_PORT_FACTS_REPLY pfp;
|
|
MSG_IOC_FACTS_REPLY facts;
|
|
int try;
|
|
int needreset;
|
|
uint32_t max_chain_depth;
|
|
|
|
needreset = 0;
|
|
for (try = 0; try < MPT_MAX_TRYS; try++) {
|
|
|
|
/*
|
|
* No need to reset if the IOC is already in the READY state.
|
|
*
|
|
* Force reset if initialization failed previously.
|
|
* Note that a hard_reset of the second channel of a '929
|
|
* will stop operation of the first channel. Hopefully, if the
|
|
* first channel is ok, the second will not require a hard
|
|
* reset.
|
|
*/
|
|
if (needreset || MPT_STATE(mpt_rd_db(mpt)) !=
|
|
MPT_DB_STATE_READY) {
|
|
if (mpt_reset(mpt, FALSE) != MPT_OK) {
|
|
continue;
|
|
}
|
|
}
|
|
needreset = 0;
|
|
|
|
if (mpt_get_iocfacts(mpt, &facts) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_get_iocfacts failed\n");
|
|
needreset = 1;
|
|
continue;
|
|
}
|
|
|
|
mpt->mpt_global_credits = le16toh(facts.GlobalCredits);
|
|
mpt->request_frame_size = le16toh(facts.RequestFrameSize);
|
|
mpt->ioc_facts_flags = facts.Flags;
|
|
mpt_prt(mpt, "MPI Version=%d.%d.%d.%d\n",
|
|
le16toh(facts.MsgVersion) >> 8,
|
|
le16toh(facts.MsgVersion) & 0xFF,
|
|
le16toh(facts.HeaderVersion) >> 8,
|
|
le16toh(facts.HeaderVersion) & 0xFF);
|
|
|
|
/*
|
|
* Now that we know request frame size, we can calculate
|
|
* the actual (reasonable) segment limit for read/write I/O.
|
|
*
|
|
* This limit is constrained by:
|
|
*
|
|
* + The size of each area we allocate per command (and how
|
|
* many chain segments we can fit into it).
|
|
* + The total number of areas we've set up.
|
|
* + The actual chain depth the card will allow.
|
|
*
|
|
* The first area's segment count is limited by the I/O request
|
|
* at the head of it. We cannot allocate realistically more
|
|
* than MPT_MAX_REQUESTS areas. Therefore, to account for both
|
|
* conditions, we'll just start out with MPT_MAX_REQUESTS-2.
|
|
*
|
|
*/
|
|
max_chain_depth = facts.MaxChainDepth;
|
|
|
|
/* total number of request areas we (can) allocate */
|
|
mpt->max_seg_cnt = MPT_MAX_REQUESTS(mpt) - 2;
|
|
|
|
/* converted to the number of chain areas possible */
|
|
mpt->max_seg_cnt *= MPT_NRFM(mpt);
|
|
|
|
/* limited by the number of chain areas the card will support */
|
|
if (mpt->max_seg_cnt > max_chain_depth) {
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"chain depth limited to %u (from %u)\n",
|
|
max_chain_depth, mpt->max_seg_cnt);
|
|
mpt->max_seg_cnt = max_chain_depth;
|
|
}
|
|
|
|
/* converted to the number of simple sges in chain segments. */
|
|
mpt->max_seg_cnt *= (MPT_NSGL(mpt) - 1);
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"Maximum Segment Count: %u\n", mpt->max_seg_cnt);
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"MsgLength=%u IOCNumber = %d\n",
|
|
facts.MsgLength, facts.IOCNumber);
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"IOCFACTS: GlobalCredits=%d BlockSize=%u bytes "
|
|
"Request Frame Size %u bytes Max Chain Depth %u\n",
|
|
mpt->mpt_global_credits, facts.BlockSize,
|
|
mpt->request_frame_size << 2, max_chain_depth);
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"IOCFACTS: Num Ports %d, FWImageSize %d, "
|
|
"Flags=%#x\n", facts.NumberOfPorts,
|
|
le32toh(facts.FWImageSize), facts.Flags);
|
|
|
|
|
|
if ((facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) != 0) {
|
|
struct mpt_map_info mi;
|
|
int error;
|
|
|
|
/*
|
|
* In some configurations, the IOC's firmware is
|
|
* stored in a shared piece of system NVRAM that
|
|
* is only accessable via the BIOS. In this
|
|
* case, the firmware keeps a copy of firmware in
|
|
* RAM until the OS driver retrieves it. Once
|
|
* retrieved, we are responsible for re-downloading
|
|
* the firmware after any hard-reset.
|
|
*/
|
|
mpt->fw_image_size = le32toh(facts.FWImageSize);
|
|
error = mpt_dma_tag_create(mpt, mpt->parent_dmat,
|
|
/*alignment*/1, /*boundary*/0,
|
|
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
|
|
/*highaddr*/BUS_SPACE_MAXADDR, /*filter*/NULL,
|
|
/*filterarg*/NULL, mpt->fw_image_size,
|
|
/*nsegments*/1, /*maxsegsz*/mpt->fw_image_size,
|
|
/*flags*/0, &mpt->fw_dmat);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "cannot create fw dma tag\n");
|
|
return (ENOMEM);
|
|
}
|
|
error = bus_dmamem_alloc(mpt->fw_dmat,
|
|
(void **)&mpt->fw_image, BUS_DMA_NOWAIT,
|
|
&mpt->fw_dmap);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "cannot allocate fw mem.\n");
|
|
bus_dma_tag_destroy(mpt->fw_dmat);
|
|
return (ENOMEM);
|
|
}
|
|
mi.mpt = mpt;
|
|
mi.error = 0;
|
|
bus_dmamap_load(mpt->fw_dmat, mpt->fw_dmap,
|
|
mpt->fw_image, mpt->fw_image_size, mpt_map_rquest,
|
|
&mi, 0);
|
|
mpt->fw_phys = mi.phys;
|
|
|
|
error = mpt_upload_fw(mpt);
|
|
if (error != 0) {
|
|
mpt_prt(mpt, "fw upload failed.\n");
|
|
bus_dmamap_unload(mpt->fw_dmat, mpt->fw_dmap);
|
|
bus_dmamem_free(mpt->fw_dmat, mpt->fw_image,
|
|
mpt->fw_dmap);
|
|
bus_dma_tag_destroy(mpt->fw_dmat);
|
|
mpt->fw_image = NULL;
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
if (mpt_get_portfacts(mpt, &pfp) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_get_portfacts failed\n");
|
|
needreset = 1;
|
|
continue;
|
|
}
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG,
|
|
"PORTFACTS: Type %x PFlags %x IID %d MaxDev %d\n",
|
|
pfp.PortType, pfp.ProtocolFlags, pfp.PortSCSIID,
|
|
pfp.MaxDevices);
|
|
|
|
mpt->mpt_port_type = pfp.PortType;
|
|
mpt->mpt_proto_flags = pfp.ProtocolFlags;
|
|
if (pfp.PortType != MPI_PORTFACTS_PORTTYPE_SCSI &&
|
|
pfp.PortType != MPI_PORTFACTS_PORTTYPE_SAS &&
|
|
pfp.PortType != MPI_PORTFACTS_PORTTYPE_FC) {
|
|
mpt_prt(mpt, "Unsupported Port Type (%x)\n",
|
|
pfp.PortType);
|
|
return (ENXIO);
|
|
}
|
|
mpt->mpt_max_tgtcmds = le16toh(pfp.MaxPostedCmdBuffers);
|
|
|
|
if (pfp.PortType == MPI_PORTFACTS_PORTTYPE_FC) {
|
|
mpt->is_fc = 1;
|
|
mpt->is_sas = 0;
|
|
} else if (pfp.PortType == MPI_PORTFACTS_PORTTYPE_SAS) {
|
|
mpt->is_fc = 0;
|
|
mpt->is_sas = 1;
|
|
} else {
|
|
mpt->is_fc = 0;
|
|
mpt->is_sas = 0;
|
|
}
|
|
mpt->mpt_ini_id = pfp.PortSCSIID;
|
|
mpt->mpt_max_devices = pfp.MaxDevices;
|
|
|
|
/*
|
|
* Match our expected role with what this port supports.
|
|
*
|
|
* We only do this to meet expectations. That is, if the
|
|
* user has specified they want initiator role, and we
|
|
* don't support it, that's an error we return back upstream.
|
|
*/
|
|
|
|
mpt->cap = MPT_ROLE_NONE;
|
|
if (pfp.ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
|
|
mpt->cap |= MPT_ROLE_INITIATOR;
|
|
}
|
|
if (pfp.ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
|
|
mpt->cap |= MPT_ROLE_TARGET;
|
|
}
|
|
if (mpt->cap == MPT_ROLE_NONE) {
|
|
mpt_prt(mpt, "port does not support either target or "
|
|
"initiator role\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
if ((mpt->role & MPT_ROLE_INITIATOR) &&
|
|
(mpt->cap & MPT_ROLE_INITIATOR) == 0) {
|
|
mpt_prt(mpt, "port does not support initiator role\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
if ((mpt->role & MPT_ROLE_TARGET) &&
|
|
(mpt->cap & MPT_ROLE_TARGET) == 0) {
|
|
mpt_prt(mpt, "port does not support target role\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (mpt_enable_ioc(mpt, 0) != MPT_OK) {
|
|
mpt_prt(mpt, "unable to initialize IOC\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Read IOC configuration information.
|
|
*/
|
|
mpt_read_config_info_ioc(mpt);
|
|
|
|
/* Everything worked */
|
|
break;
|
|
}
|
|
|
|
if (try >= MPT_MAX_TRYS) {
|
|
mpt_prt(mpt, "failed to initialize IOC");
|
|
return (EIO);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mpt_enable_ioc(struct mpt_softc *mpt, int portenable)
|
|
{
|
|
uint32_t pptr;
|
|
int val;
|
|
|
|
if (mpt_send_ioc_init(mpt, MPI_WHOINIT_HOST_DRIVER) != MPT_OK) {
|
|
mpt_prt(mpt, "mpt_send_ioc_init failed\n");
|
|
return (EIO);
|
|
}
|
|
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_send_ioc_init ok\n");
|
|
|
|
if (mpt_wait_state(mpt, MPT_DB_STATE_RUNNING) != MPT_OK) {
|
|
mpt_prt(mpt, "IOC failed to go to run state\n");
|
|
return (ENXIO);
|
|
}
|
|
mpt_lprt(mpt, MPT_PRT_DEBUG, "IOC now at RUNSTATE\n");
|
|
|
|
/*
|
|
* Give it reply buffers
|
|
*
|
|
* Do *not* exceed global credits.
|
|
*/
|
|
for (val = 0, pptr = mpt->reply_phys;
|
|
(pptr + MPT_REPLY_SIZE) < (mpt->reply_phys + PAGE_SIZE);
|
|
pptr += MPT_REPLY_SIZE) {
|
|
mpt_free_reply(mpt, pptr);
|
|
if (++val == mpt->mpt_global_credits - 1)
|
|
break;
|
|
}
|
|
|
|
|
|
/*
|
|
* Enable the port if asked
|
|
*/
|
|
if (portenable) {
|
|
/*
|
|
* Enable asynchronous event reporting
|
|
*/
|
|
mpt_send_event_request(mpt, 1);
|
|
|
|
if (mpt_send_port_enable(mpt, 0) != MPT_OK) {
|
|
mpt_prt(mpt, "failed to enable port 0\n");
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
return (MPT_OK);
|
|
}
|