219d14fe5f
Executive is a library that can be used by standalone applications and kernels to abstract access to Octeon SoC and board-specific hardware and facilities. The FreeBSD port to Octeon will be updated to use this where possible.
314 lines
9.8 KiB
C
314 lines
9.8 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2008 Cavium Networks (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
*
|
|
* * Neither the name of Cavium Networks nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS
|
|
* OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
|
|
* RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
|
|
* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
|
|
* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
|
|
* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
|
|
* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET
|
|
* POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT
|
|
* OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
*
|
|
*
|
|
* For any questions regarding licensing please contact marketing@caviumnetworks.com
|
|
*
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Interface to the TWSI / I2C bus
|
|
*
|
|
* Note: Currently on 7 bit device addresses are supported
|
|
*
|
|
* <hr>$Revision: 41586 $<hr>
|
|
*
|
|
*/
|
|
|
|
#ifndef __CVMX_TWSI_H__
|
|
#define __CVMX_TWSI_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
|
|
|
|
/**
|
|
* Do a twsi read from a 7 bit device address using an (optional) internal address.
|
|
* Up to 8 bytes can be read at a time.
|
|
*
|
|
* @param twsi_id which Octeon TWSI bus to use
|
|
* @param dev_addr Device address (7 bit)
|
|
* @param internal_addr
|
|
* Internal address. Can be 0, 1 or 2 bytes in width
|
|
* @param num_bytes Number of data bytes to read
|
|
* @param ia_width_bytes
|
|
* Internal address size in bytes (0, 1, or 2)
|
|
* @param data Pointer argument where the read data is returned.
|
|
*
|
|
* @return read data returned in 'data' argument
|
|
* Number of bytes read on success
|
|
* -1 on failure
|
|
*/
|
|
int cvmx_twsix_read_ia(int twsi_id, uint8_t dev_addr, uint16_t internal_addr, int num_bytes, int ia_width_bytes, uint64_t *data);
|
|
|
|
|
|
|
|
|
|
/**
|
|
* A convenience wrapper function around cvmx_twsix_read_ia() that
|
|
* only supports 8 bit internal addresses.
|
|
* Reads up to 7 bytes, and returns both the value read or error
|
|
* value in the return value
|
|
*
|
|
* @param twsi_id which Octeon TWSI bus to use
|
|
* @param dev_addr Device address (7 bit only)
|
|
* @param internal_addr
|
|
* Internal address (8 bit only)
|
|
* @param num_bytes Number of bytes to read (0-7)
|
|
*
|
|
* @return Value read from TWSI on success
|
|
* -1 on error
|
|
*/
|
|
static inline int64_t cvmx_twsix_read_ia8(int twsi_id, uint8_t dev_addr, uint8_t internal_addr, int num_bytes)
|
|
{
|
|
uint64_t data;
|
|
if (num_bytes < 1 || num_bytes > 7)
|
|
return -1;
|
|
if (cvmx_twsix_read_ia(twsi_id,dev_addr,internal_addr,num_bytes, 1, &data) < 0)
|
|
return -1;
|
|
return data;
|
|
}
|
|
|
|
/**
|
|
* A convenience wrapper function around cvmx_twsix_read_ia() that
|
|
* only supports 16 bit internal addresses.
|
|
* Reads up to 7 bytes, and returns both the value read or error
|
|
* value in the return value
|
|
*
|
|
* @param twsi_id which Octeon TWSI bus to use
|
|
* @param dev_addr Device address (7 bit only)
|
|
* @param internal_addr
|
|
* Internal address (16 bit only)
|
|
* @param num_bytes Number of bytes to read (0-7)
|
|
*
|
|
* @return Value read from TWSI on success
|
|
* -1 on error
|
|
*/
|
|
static inline int64_t cvmx_twsix_read_ia16(int twsi_id, uint8_t dev_addr, uint16_t internal_addr, int num_bytes)
|
|
{
|
|
uint64_t data;
|
|
if (num_bytes < 1 || num_bytes > 7)
|
|
return -1;
|
|
if (cvmx_twsix_read_ia(twsi_id, dev_addr, internal_addr, num_bytes, 2, &data) < 0)
|
|
return -1;
|
|
return data;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* Read from a TWSI device (7 bit device address only) without generating any
|
|
* internal addresses.
|
|
* Read from 1-8 bytes and returns them in the data pointer.
|
|
*
|
|
* @param twsi_id TWSI interface on Octeon to use
|
|
* @param dev_addr TWSI device address (7 bit only)
|
|
* @param num_bytes number of bytes to read
|
|
* @param data Pointer to data read from TWSI device
|
|
*
|
|
* @return Number of bytes read on success
|
|
* -1 on error
|
|
*/
|
|
int cvmx_twsix_read(int twsi_id, uint8_t dev_addr, int num_bytes, uint64_t *data);
|
|
|
|
|
|
|
|
/**
|
|
* Perform a twsi write operation to a 7 bit device address.
|
|
*
|
|
* Note that many eeprom devices have page restrictions regarding address boundaries
|
|
* that can be crossed in one write operation. This is device dependent, and this routine
|
|
* does nothing in this regard.
|
|
* This command does not generate any internal addressess.
|
|
*
|
|
* @param twsi_id Octeon TWSI interface to use
|
|
* @param dev_addr TWSI device address
|
|
* @param num_bytes Number of bytes to write (between 1 and 8 inclusive)
|
|
* @param data Data to write
|
|
*
|
|
* @return 0 on success
|
|
* -1 on failure
|
|
*/
|
|
int cvmx_twsix_write(int twsi_id, uint8_t dev_addr, int num_bytes, uint64_t data);
|
|
|
|
/**
|
|
* Write 1-8 bytes to a TWSI device using an internal address.
|
|
*
|
|
* @param twsi_id which TWSI interface on Octeon to use
|
|
* @param dev_addr TWSI device address (7 bit only)
|
|
* @param internal_addr
|
|
* TWSI internal address (0, 8, or 16 bits)
|
|
* @param num_bytes Number of bytes to write (1-8)
|
|
* @param ia_width_bytes
|
|
* internal address width, in bytes (0, 1, 2)
|
|
* @param data Data to write. Data is written MSB first on the twsi bus, and only the lower
|
|
* num_bytes bytes of the argument are valid. (If a 2 byte write is done, only
|
|
* the low 2 bytes of the argument is used.
|
|
*
|
|
* @return Number of bytes read on success,
|
|
* -1 on error
|
|
*/
|
|
int cvmx_twsix_write_ia(int twsi_id, uint8_t dev_addr, uint16_t internal_addr, int num_bytes, int ia_width_bytes, uint64_t data);
|
|
|
|
/***********************************************************************
|
|
** Functions below are deprecated, and not recomended for use.
|
|
** They have been superceded by more flexible functions that are
|
|
** now provided.
|
|
************************************************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
* Read 8-bit from a device on the TWSI / I2C bus
|
|
*
|
|
* @param twsi_id Which TWSI bus to use. CN3XXX, CN58XX, and CN50XX only
|
|
* support 0. CN56XX and CN57XX support 0-1.
|
|
* @param dev_addr I2C device address (7 bit)
|
|
* @param internal_addr
|
|
* Internal device address
|
|
*
|
|
* @return 8-bit data or < 0 in case of error
|
|
*/
|
|
static inline int cvmx_twsix_read8(int twsi_id, uint8_t dev_addr, uint8_t internal_addr)
|
|
{
|
|
return cvmx_twsix_read_ia8(twsi_id, dev_addr, internal_addr, 1);
|
|
}
|
|
|
|
/**
|
|
* Read 8-bit from a device on the TWSI / I2C bus
|
|
*
|
|
* Uses current internal address
|
|
*
|
|
* @param twsi_id Which TWSI bus to use. CN3XXX, CN58XX, and CN50XX only
|
|
* support 0. CN56XX and CN57XX support 0-1.
|
|
* @param dev_addr I2C device address (7 bit)
|
|
*
|
|
* @return 8-bit value or < 0 in case of error
|
|
*/
|
|
static inline int cvmx_twsix_read8_cur_addr(int twsi_id, uint8_t dev_addr)
|
|
{
|
|
uint64_t data;
|
|
|
|
if (cvmx_twsix_read(twsi_id,dev_addr, 1, &data) < 0)
|
|
return -1;
|
|
return(data & 0xff);
|
|
}
|
|
|
|
/**
|
|
* Write 8-bit to a device on the TWSI / I2C bus
|
|
*
|
|
* @param twsi_id Which TWSI bus to use. CN3XXX, CN58XX, and CN50XX only
|
|
* support 0. CN56XX and CN57XX support 0-1.
|
|
* @param dev_addr I2C device address (7 bit)
|
|
* @param internal_addr
|
|
* Internal device address
|
|
* @param data Data to be written
|
|
*
|
|
* @return 0 on success and < 0 in case of error
|
|
*/
|
|
static inline int cvmx_twsix_write8(int twsi_id, uint8_t dev_addr, uint8_t internal_addr, uint8_t data)
|
|
{
|
|
if (cvmx_twsix_write_ia(twsi_id,dev_addr,internal_addr, 1, 1,data) < 0)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Read 8-bit from a device on the TWSI / I2C bus zero.
|
|
*
|
|
* This function is for compatibility with SDK 1.6.0 and
|
|
* before which only supported a single TWSI bus.
|
|
*
|
|
* @param dev_addr I2C device address (7 bit)
|
|
* @param internal_addr
|
|
* Internal device address
|
|
*
|
|
* @return 8-bit data or < 0 in case of error
|
|
*/
|
|
static inline int cvmx_twsi_read8(uint8_t dev_addr, uint8_t internal_addr)
|
|
{
|
|
return cvmx_twsix_read8(0, dev_addr, internal_addr);
|
|
}
|
|
|
|
/**
|
|
* Read 8-bit from a device on the TWSI / I2C bus zero.
|
|
*
|
|
* Uses current internal address
|
|
*
|
|
* This function is for compatibility with SDK 1.6.0 and
|
|
* before which only supported a single TWSI bus.
|
|
*
|
|
* @param dev_addr I2C device address (7 bit)
|
|
*
|
|
* @return 8-bit value or < 0 in case of error
|
|
*/
|
|
static inline int cvmx_twsi_read8_cur_addr(uint8_t dev_addr)
|
|
{
|
|
return cvmx_twsix_read8_cur_addr(0, dev_addr);
|
|
}
|
|
|
|
/**
|
|
* Write 8-bit to a device on the TWSI / I2C bus zero.
|
|
* This function is for compatibility with SDK 1.6.0 and
|
|
* before which only supported a single TWSI bus.
|
|
*
|
|
* @param dev_addr I2C device address (7 bit)
|
|
* @param internal_addr
|
|
* Internal device address
|
|
* @param data Data to be written
|
|
*
|
|
* @return 0 on success and < 0 in case of error
|
|
*/
|
|
static inline int cvmx_twsi_write8(uint8_t dev_addr, uint8_t internal_addr, uint8_t data)
|
|
{
|
|
return cvmx_twsix_write8(0, dev_addr, internal_addr, data);
|
|
}
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __CVMX_TWSI_H__ */
|