freebsd-nq/sys/pci
Bill Paul b08cfb55ef Make some small tweaks:
- When setting/clearing promisc mode, just update the filter, don't
  reset the whole interface.

- Call xl_init() in xl_ifmedia_upd() when setting miibus media modes. This
  fixes a problem with the 3c905B-COMBO where switching from 10base5/AUI
  or 10base2/BNC to a 10/100 mode doesn't always work right.

- Attempt to reset the interface in xl_init() so that we know we're getting
  the receive and transmit rings reset properly.
1999-10-14 21:49:17 +00:00
..
adv_pci.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
adw_pci.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ahc_pci.c Get rid of a stray printf on boot. (BRDCTL = ...) 1999-09-13 16:32:34 +00:00
alpm.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
amd.c Properly set the alignment argument to bus_dma_tag_create(). If we 1999-08-16 01:52:21 +00:00
amd.h First cut at a driver for the amd53c974 PCI SCSI host adapter. This 1999-05-22 21:50:40 +00:00
cy_pci.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
cy_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
dc21040reg.h s/Id/FreeBSD/ 1999-08-09 12:52:49 +00:00
ida_pci.c Removal of sys/device.h 1999-10-05 21:19:41 +00:00
ide_pci.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ide_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_al.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_alreg.h Spruce up the ADMtek driver: conver to newbus, miibus and add support 1999-09-22 05:07:51 +00:00
if_ax.c As suggested by phk, unconditionalize BPF support in these drivers. Since 1999-09-23 03:32:57 +00:00
if_axreg.h Clean up two cases of the alpha vtophys() hack that should be 1999-09-18 04:04:03 +00:00
if_de.c Remove NBPF conditionality of bpf calls in most of our network drivers. 1999-09-25 12:06:01 +00:00
if_devar.h A little more tidying up. 1999-08-09 14:43:39 +00:00
if_dm.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_dmreg.h This commit adds driver support for PCI fast ethernet NICs based on 1999-09-06 06:14:30 +00:00
if_en_pci.c Clean up after removing sys/eventhandler.h from sys/systm.h at the last 1999-08-21 22:10:49 +00:00
if_fpa.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_fxp.c Make the fxp driver work on alpha, rather than panic the machine on boot 1999-09-30 19:03:12 +00:00
if_fxpreg.h Make the fxp driver work on alpha, rather than panic the machine on boot 1999-09-30 19:03:12 +00:00
if_fxpvar.h Make the fxp driver work on alpha, rather than panic the machine on boot 1999-09-30 19:03:12 +00:00
if_lnc_p.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_mx.c As suggested by phk, unconditionalize BPF support in these drivers. Since 1999-09-23 03:32:57 +00:00
if_mxreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_pn.c As suggested by phk, unconditionalize BPF support in these drivers. Since 1999-09-23 03:32:57 +00:00
if_pnreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_rl.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_rlreg.h Convert the RealTek 8139 driver to newbus and miibus in one swell foop. 1999-08-31 14:45:51 +00:00
if_sf.c Update the Starfire driver comments and man page to include the URL of 1999-09-26 18:35:30 +00:00
if_sfreg.h #ifdef out the definition for the small packet RX ring. I ended up only 1999-09-03 20:58:39 +00:00
if_sis.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_sisreg.h This commit adds driver support for the Silicon Integrated Systems 1999-09-05 21:01:03 +00:00
if_sk.c Call sk_start() at the end of sk_intr() if there's packets in the 1999-09-25 04:50:27 +00:00
if_skreg.h Fix the mechanism used to choose the unit numbers for the IP interfaces 1999-09-18 04:01:31 +00:00
if_sr_p.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_ste.c As suggested by phk, unconditionalize BPF support in these drivers. Since 1999-09-23 03:32:57 +00:00
if_stereg.h Clean up two cases of the alpha vtophys() hack that should be 1999-09-18 04:04:03 +00:00
if_ti.c As suggested by phk, unconditionalize BPF support in these drivers. Since 1999-09-23 03:32:57 +00:00
if_tireg.h Update the Tigon driver firmware images to the latest release from 1999-09-22 06:43:16 +00:00
if_tl.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_tlreg.h Make some small performance tweaks to the tl driver. This should hopefully 1999-09-19 22:39:24 +00:00
if_tx.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_txvar.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_vr.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_vrreg.h Convert the VIA Rhine driver to miibus. 1999-09-19 22:03:31 +00:00
if_vx_pci.c Clean up after removing sys/eventhandler.h from sys/systm.h at the last 1999-08-21 22:10:49 +00:00
if_wb.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_wbreg.h Convert the Adaptec and Winbond drivers to miibus. 1999-08-30 23:08:32 +00:00
if_xl.c Make some small tweaks: 1999-10-14 21:49:17 +00:00
if_xlreg.h Make some small tweaks: 1999-10-14 21:49:17 +00:00
intpm.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
intpmreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
isp_pci.c remove unnecessary includes 1999-10-11 19:30:59 +00:00
locate.pl MFS: Change path to perl. 1999-08-30 14:41:09 +00:00
meteor_reg.h Convert DEVFS hooks in (most) drivers to make_dev(). 1999-08-23 20:59:21 +00:00
meteor.c Remove five now unused fields from struct cdevsw. They should never 1999-09-25 18:24:47 +00:00
ncr.c Don't restrict our requests for contiguous memory to addresses >= 1MB. 1999-08-29 09:03:58 +00:00
ncrreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ohci_pci.c Check for a valid irq number before calling BUS_SETUP_INTR. 1999-10-03 20:23:25 +00:00
pci_compat.c * Implement bus_set/get/delete_resource for pci. 1999-10-14 21:38:33 +00:00
pci_if.m $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
pci_ioctl.h Revive PCIConf. 1998-09-15 08:21:13 +00:00
pci.c * Implement bus_set/get/delete_resource for pci. 1999-10-14 21:38:33 +00:00
pcic_p.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
pcic_p.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
pcireg.h Add the 16550 programming interface code for PCIS_SIMPLECOMM_UART. 1999-10-09 16:00:56 +00:00
pcisupport.c * Implement bus_set/get/delete_resource for pci. 1999-10-14 21:38:33 +00:00
pcivar.h * Implement bus_set/get/delete_resource for pci. 1999-10-14 21:38:33 +00:00
scsiiom.c Use [u]intptr_t instead of [unsigned] long to convert and/or represent 1998-08-10 17:21:49 +00:00
simos.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
simos.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ti_fw2.h Update the Tigon driver firmware images to the latest release from 1999-09-22 06:43:16 +00:00
ti_fw.h Update the Tigon driver firmware images to the latest release from 1999-09-22 06:43:16 +00:00
uhci_pci.c remove the use of uhci_reset to wake up the controller after 1999-10-07 18:56:10 +00:00
xmaciireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
xrpu.c Remove five now unused fields from struct cdevsw. They should never 1999-09-25 18:24:47 +00:00