freebsd with flexible iflib nic queues
Go to file
Richard Yao cbe8e6198c Properly link zpool command to libblkid
31fc19399e incorrectly removed $(LIBBLKID)
from cmd/zpool/Makefile.am. This meant that the toolchain was not given
-lblkid, which resulted in the following build failure on Ubuntu 13.10:

/usr/bin/ld: zpool_vdev.o: undefined reference to symbol
'blkid_put_cache@@BLKID_1.0'
/lib/x86_64-linux-gnu/libblkid.so.1: error adding symbols: DSO missing
from command line
collect2: error: ld returned 1 exit status

That commit reworked various Makefile.am to follow best practices, so we
reintroduce $(LIBBLKID) in a manner consistent with that, rather than
explicitly reverting the change.

Reproduction of this issue was done on a Gentoo Linux system by
executing the following commands:

zfs create -o mountpoint=/mnt/ubuntu-13.10 rpool/ROOT/ubuntu-13.10
debootstrap --variant=buildd --arch amd64 saucy /mnt/ubuntu-13.10 http://archive.ubuntu.com/ubuntu/
mount -o bind /dev /mnt/ubuntu-13.10/dev/
mount -o bind /proc/ /mnt/ubuntu-13.10/proc/
mount -o bind /sys/ /mnt/ubuntu-13.10/sys/
cp /etc/resolv.conf /mnt/ubuntu-13.10/etc/
(cd /mnt/ubuntu-13.10/root/ && git clone git://github.com/zfsonlinux/zfs.git)
chroot /mnt/ubuntu-13.10/
apt-get install git autoconf libtool zlib1g-dev uuid-dev libblkid-dev
\#apt-get install alien fakeroot vim
cd /root/zfs
./autogen.sh
./configure --with-config=user --prefix=/usr
make

That will create a Ubuntu 13.10 chroot, fetch the sources and build
test. At this point, cmd/zpool/Makefile.am was modified and the
following commands were run to verify that the build issue was resolved:

git clean -xdf
./autogen.sh
./configure --with-config=user --prefix=/usr
make

Although it is not shown here, the absence of libblkid-dev enables ZFS
to build successfully without the patch. This could explain how this
escaped detection until recently. A test without libblkid-dev was done
to verify that the patch did not cause a regression in the absence of
libblkid:

apt-get remove libblkid-dev
git clean -xdf
./autogen.sh
./configure --with-config=user --prefix=/usr
make

Additionally, the commands themselves were tested against my live system
from within the chroot to ensure basic functionality. My live system had
corresponding kernel modules already installed and basic commands such
as `zpool list` and `zfs list` worked without incident. Lastly, this
patch was also build tested on Gentoo Linux, where it caused no
problems.

At time of writing, these steps can be used to reproduce these results
on any modern Linux system that has debootstrap installed. On Gentoo,
installing debootstrap can be done with `emerge dev-util/debootstrap`.
The current ZFSOnLinux HEAD revision as of writing is
fd23720ae1.  Once this is fixed in HEAD,
either that revision or another before this fix and after
31fc19399e will be needed to reproduce
this issue.

Lastly, it remains to be seen why the toolchains on the systems
performing regression tests did not catch this. This is not a
ZFS-specific issue, but it is something that we will want to explore in
the future.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2038
2014-01-14 10:27:17 -08:00
cmd Properly link zpool command to libblkid 2014-01-14 10:27:17 -08:00
config Add full SELinux support 2013-12-19 10:37:31 -08:00
dracut Refresh dracut module setup 2013-03-21 12:51:06 -07:00
etc Add UNSHARING of filesystems and EXPORTING pools 2014-01-07 09:48:04 -08:00
include Use local variable to read zp->z_mode 2014-01-09 15:50:11 -08:00
lib Prevent duplicate mnttab cache entries 2014-01-14 10:27:12 -08:00
man Add full SELinux support 2013-12-19 10:37:31 -08:00
module Drain iput taskq outside z_teardown_lock 2014-01-09 15:54:08 -08:00
patches Adding grub2 mkconfig support patch 2012-07-30 16:17:23 -07:00
rpm Add full SELinux support 2013-12-19 10:37:31 -08:00
scripts cstyle: Allow spaces in all comments 2013-12-18 16:46:35 -08:00
udev Open pools asynchronously after module load 2013-07-03 09:24:38 -07:00
.gitignore Ignore *.{deb,rpm,tar.gz} files in the top directory. 2013-04-24 16:18:59 -07:00
AUTHORS Fix minor typos and update marketing copy. 2013-03-21 12:51:06 -07:00
autogen.sh build: do not call boilerplate ourself 2013-04-02 10:55:20 -07:00
configure.ac Add dbufstat.py command 2013-10-25 14:52:45 -07:00
copy-builtin Consistent menuconfig name 2012-08-26 13:49:37 -07:00
COPYRIGHT Refresh links to web site 2013-03-06 15:46:41 -08:00
DISCLAIMER Fix minor typos and update marketing copy. 2013-03-21 12:51:06 -07:00
Makefile.am cstyle: Exclude several files from 'make checkstyle' 2013-12-18 16:46:35 -08:00
META Tag zfs-0.6.2 2013-08-22 13:33:26 -07:00
OPENSOLARIS.LICENSE Add CDDL license file 2008-12-01 14:49:34 -08:00
README.markdown Fix minor typos and update marketing copy. 2013-03-21 12:51:06 -07:00
zfs-script-config.sh.in Retire zpool_id infrastructure 2013-01-29 12:23:17 -08:00
zfs.release.in Move zfs.release generation to configure step 2012-07-12 12:22:51 -07:00

Native ZFS for Linux!

ZFS is an advanced file system and volume manager which was originally developed for Solaris and is now maintained by the Illumos community.

ZFS on Linux, which is also known as ZoL, is currently feature complete. It includes fully functional and stable SPA, DMU, ZVOL, and ZPL layers.

Full documentation for installing ZoL on your favorite Linux distribution can be found at: http://zfsonlinux.org