freebsd-nq/sys/mips/conf/DIR-825C1
Warner Losh 29d1144aeb Mark the mostly redundant kernels that just pull
in something from _BASE as NO_UNIVERSE

Differential Revision: https://reviews.freebsd.org/D4200
2015-11-19 01:58:12 +00:00

69 lines
1.8 KiB
Plaintext

# $FreeBSD$
#
# Specific board setup for the D-Link DIR-825C1 router.
#
# The DIR-825C1 has the following hardware:
#
# + AR9344 CPU SoC 74k MIPS
# + ARxxx 2.4GHz 11n
# + ARXXX 5GHz 11n
# + AR8327 Gigabit switch
# + m25p80 based 16MB flash
# + 128MB RAM
# + uboot environment
#NO_UNIVERSE
# Include the default AR934x parameters
include "AR934X_BASE"
ident DIR825C1
# Override hints with board values
hints "DIR-825C1.hints"
# Force the board memory - the base DB120 has 128MB RAM
options AR71XX_REALMEM=(128*1024*1024)
# i2c GPIO bus
device gpioiic
device iicbb
device iicbus
device iic
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
options MSDOSFS
# Enable the uboot environment stuff rather then the
# redboot stuff.
options AR71XX_ENV_UBOOT
# Used for the static uboot partition map
device geom_map
# uzip - to boot natively from flash
options GEOM_UNCOMPRESS
options GEOM_PART_GPT
# yes, this board has a PCI connected atheros device
device ath_pci
options AR71XX_ATH_EEPROM
device firmware # Used by the above
options ATH_EEPROM_FIRMWARE
# Boot off of the rootfs, as defined in the geom_map setup.
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
# In order to netboot, you have to build the mfsroot into the kernel
# 19443712 or 19M is the biggest rootfs via netboot this thing supports
#options MD_ROOT # md device usable as a potential root device
#options MD_ROOT_SIZE=19444
#makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma
#options ROOTDEVNAME=\"ufs:md0.uncompress\"