d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cfca8a1862
freebsd-nq/etc/rc.d
History
Ed Maste e64241487f /etc/rc.d/defaultroute currently bails immediately if all interfaces 
set to use DHCP have no carrier.  This can cause grief as it may take
some time for link to be established, and defaultroute may terminate
before this happens.

Introduce a defaultroute_carrier_delay variable and then wait that long
in defaultroute before bailing if no interfaces have carrier.  With the
default settings defaultroute will wait for five seconds for this, and
the original 30 second wait for a default route to appear is unchanged.
Note that there is in discussion an alternative approach to the broader
problem of waiting for DHCP-configured routes.  However, this change
addresses a real problem in the current defaultroute script.

Discussed on:	freebsd-rc@
2010-09-29 13:08:23 +00:00
..
abi As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
accounting
addswap Integrate rc.d/network_ipv6 into rc.d/netif: 2009-09-12 22:13:41 +00:00
adjkerntz As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
amd Substitute ypset for ypbind in REQUIRE lines. If you use ypset it has to 2009-06-01 04:55:13 +00:00
apm As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
apmd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
archdep Small cleanup, add (spurious) quotation marks around the value 2009-05-30 21:51:38 +00:00
atm1 As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
atm2 As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
atm3 As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
auditd As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
bgfsck In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
bluetooth Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
bootparams
bridge Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
bsnmpd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
bthidd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
ccd
cleanvar Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
cleartmp Avoid to try to remove suj journal file (.sujournal) and conventional 2010-09-05 05:44:40 +00:00
cron
DAEMON
ddb This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
defaultroute /etc/rc.d/defaultroute currently bails immediately if all interfaces 2010-09-29 13:08:23 +00:00
devd Integrate rc.d/network_ipv6 into rc.d/netif: 2009-09-12 22:13:41 +00:00
devfs Do not check for existence of symlink source for the link action. This 2010-01-23 11:42:31 +00:00
dhclient Add very limited support for the isc-dhclient. It will almostly certaintly 2008-04-15 23:03:35 +00:00
dmesg
dumpon This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
encswap As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
faith Remove a circular dependency on routing 2009-10-17 21:09:15 +00:00
FILESYSTEMS As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
fsck In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
ftp-proxy Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
ftpd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
gbde As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
geli Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
geli2 Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
gptboot Add gptboot script that is responsible for: 2010-09-24 19:53:55 +00:00
gssd Implement support for RPCSEC_GSS authentication to both the NFS client 2008-11-03 10:38:00 +00:00
hastd Add missing KEYWORD line. 2010-02-19 09:18:26 +00:00
hcsecd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
hostapd As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
hostid This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
hostid_save This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
hostname In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
inetd
initrandom This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
ip6addrctl Split $ipv6_prefer into $ip6addrctl_policy and $ipv6_activate_all_interfaces. 2010-09-13 19:55:40 +00:00
ipfilter Make the pf and ipfw firewalls start before netif, just like ipfilter 2009-06-01 05:35:03 +00:00
ipfs Make the pf and ipfw firewalls start before netif, just like ipfilter 2009-06-01 05:35:03 +00:00
ipfw Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
ipmon Allow starting /etc/rc.d/ipmon if ipnat is enabled but ipfilter is not 2010-08-01 15:41:00 +00:00
ipnat Make the pf and ipfw firewalls start before netif, just like ipfilter 2009-06-01 05:35:03 +00:00
ipsec Fix the typo mentioned in the PR, and one additional. 2009-08-23 05:56:54 +00:00
ipxrouted As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
jail Implement the idea of parallel-only-at-start-time in a cleaner, more 2010-03-07 04:26:21 +00:00
kadmind As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
kerberos As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
keyserv Substitute ypset for ypbind in REQUIRE lines. If you use ypset it has to 2009-06-01 04:55:13 +00:00
kldxref As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
kpasswdd As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
ldconfig In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
local Output information only if /etc/rc.local exists. 2008-06-22 16:23:39 +00:00
localpkg As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
lockd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
LOGIN
lpd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
Makefile Add gptboot script that is responsible for: 2010-09-24 19:53:55 +00:00
mdconfig This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
mdconfig2 Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
mixer As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
motd In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
mountcritlocal This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
mountcritremote Don't say we're going to mount filesystems of a certain type unless 2008-06-22 15:40:19 +00:00
mountd Add support for the experimental nfs subsystem to the scripts in 2009-06-02 22:15:47 +00:00
mountlate As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
moused In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
mroute6d Integrate rc.d/network_ipv6 into rc.d/netif: 2009-09-12 22:13:41 +00:00
mrouted
msgs As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
named In the case where named_chroot_autoupdate is NOT set, but 2010-04-28 22:29:17 +00:00
natd As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
netif Split $ipv6_prefer into $ip6addrctl_policy and $ipv6_activate_all_interfaces. 2010-09-13 19:55:40 +00:00
netoptions Add $ipv6_privacy to support net.inet6.ip6.use_tempaddr. Note that this 2010-09-13 19:52:46 +00:00
NETWORKING Integrate rc.d/network_ipv6 into rc.d/netif: 2009-09-12 22:13:41 +00:00
newsyslog In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
nfscbd Add support for the experimental nfs subsystem to the scripts in 2009-06-02 22:15:47 +00:00
nfsclient In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
nfsd Add support for the experimental nfs subsystem to the scripts in 2009-06-02 22:15:47 +00:00
nfsserver As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
nfsuserd Add support for the experimental nfs subsystem to the scripts in 2009-06-02 22:15:47 +00:00
nisdomain Substitute ypset for ypbind in REQUIRE lines. If you use ypset it has to 2009-06-01 04:55:13 +00:00
nscd Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
nsswitch Prefer echo over printf 2010-09-27 15:55:39 +00:00
ntpd Small cleanup, add (spurious) quotation marks around the value 2009-05-30 21:51:38 +00:00
ntpdate Allow use of -6 option to "server" and "peer" in ntp.conf. 2010-01-30 16:34:52 +00:00
othermta As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
pf In regards to the "Starting foo:" type messages at boot time, create and 2009-10-10 22:17:03 +00:00
pflog Reverse the effect of r193198 for pf and ipfw which will once again 2009-06-26 01:04:50 +00:00
pfsync Reverse the effect of r193198 for pf and ipfw which will once again 2009-06-26 01:04:50 +00:00
power_profile As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
powerd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
ppp Protect cross-script invocation by checking that the target script exists. 2009-09-14 16:52:38 +00:00
pppoed As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
pwcheck
quota Substitute ypset for ypbind in REQUIRE lines. If you use ypset it has to 2009-06-01 04:55:13 +00:00
random As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
rarpd
resolv As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
rfcomm_pppd_server Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
root Do nextboot -D twice during boot. The first time in rc.d/root which ensures that 2008-03-11 17:21:14 +00:00
route6d Add an extension of set_rcvar(), a new function set_rcvar_obsolete(), 2009-09-12 22:19:48 +00:00
routed Add an extension of set_rcvar(), a new function set_rcvar_obsolete(), 2009-09-12 22:19:48 +00:00
routing Better handling of ipv6_default_interface using 2010-04-26 15:31:58 +00:00
rpcbind Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
rtadvd Use ipv6if() when $rtadvd_interfaces="AUTO". 2009-09-26 19:00:47 +00:00
rtsold Add the shutdown KEYWORD. 2010-02-27 19:02:21 +00:00
rwho Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
savecore This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
sdpd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
securelevel
sendmail Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
serial With uart(4) default, change /dev/cuad# to /dev/cuau# and 2008-07-19 20:12:02 +00:00
SERVERS This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
sppp As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
sshd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
statd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
static_arp Set svn:executable to *. 2010-01-11 23:32:36 +00:00
stf Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
swap1 Backout previous commit due to PEBKAC 2009-03-11 12:55:12 +00:00
syscons Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
sysctl This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00
syslogd
timed Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
tmp Use an unique directory name instead of hardcoded /tmp/.diskless. 2010-03-13 12:02:44 +00:00
ubthidhci Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
ugidfw Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
var Let rc and periodic infrastructure and newsyslog use the utmpx files. 2010-01-13 19:07:48 +00:00
virecover
watchdogd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
wpa_supplicant Move is_wired_interface() from rc.d/wpa_supplicant into network.subr, 2009-08-23 05:47:19 +00:00
ypbind Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
yppasswdd Substitute ypset for ypbind in REQUIRE lines. If you use ypset it has to 2009-06-01 04:55:13 +00:00
ypserv Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
ypset Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
ypupdated Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
ypxfrd Add the shutdown KEYWORD to those scripts that start persistent services 2008-07-16 19:50:29 +00:00
zfs Currently there is a problem with fscking UFS file systems created on 2009-07-29 05:23:52 +00:00
zvol This change does the following for the scripts that run up through 2010-05-19 19:03:19 +00:00