d04835140f
controller to perform MDIO type accesses to a remote transceiver using message pages defined through MRBE(multirate backplane ethernet). It's used in blade systems(e.g Dell Blade m610) which are connected to pass-through blades rather than traditional switches. This change directly manipulates firmware's mailboxes to control remote PHY such that it does not use mii(4). Alternatively, as David said, it could be implemented in brgphy(4) by creating a fake PHY and let brgphy(4) do necessary mii accesses and bce(4) can implement mailbox accesses based on the type of brgphy(4)'s mii accesses. Personally, I think it would make brgphy(4) hard to maintain since it would have to access many bce(4) registers in brgphy(4). Given that there are users who are suffering from lack of remote PHY support, it would be better to get working system rather than waiting for complete/perfect implementation. Tested by: Jan Winter ( jan.winter <> kantarmedia dot de ) Reviewed by: davidch (initial version) MFC after: 2 weeks
11632 lines
371 KiB
C
11632 lines
371 KiB
C
/*-
|
|
* Copyright (c) 2006-2010 Broadcom Corporation
|
|
* David Christensen <davidch@broadcom.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of Broadcom Corporation nor the name of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written consent.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* The following controllers are supported by this driver:
|
|
* BCM5706C A2, A3
|
|
* BCM5706S A2, A3
|
|
* BCM5708C B1, B2
|
|
* BCM5708S B1, B2
|
|
* BCM5709C A1, C0
|
|
* BCM5709S A1, C0
|
|
* BCM5716C C0
|
|
* BCM5716S C0
|
|
*
|
|
* The following controllers are not supported by this driver:
|
|
* BCM5706C A0, A1 (pre-production)
|
|
* BCM5706S A0, A1 (pre-production)
|
|
* BCM5708C A0, B0 (pre-production)
|
|
* BCM5708S A0, B0 (pre-production)
|
|
* BCM5709C A0 B0, B1, B2 (pre-production)
|
|
* BCM5709S A0, B0, B1, B2 (pre-production)
|
|
*/
|
|
|
|
#include "opt_bce.h"
|
|
|
|
#include <dev/bce/if_bcereg.h>
|
|
#include <dev/bce/if_bcefw.h>
|
|
|
|
/****************************************************************************/
|
|
/* BCE Debug Options */
|
|
/****************************************************************************/
|
|
#ifdef BCE_DEBUG
|
|
u32 bce_debug = BCE_WARN;
|
|
|
|
/* 0 = Never */
|
|
/* 1 = 1 in 2,147,483,648 */
|
|
/* 256 = 1 in 8,388,608 */
|
|
/* 2048 = 1 in 1,048,576 */
|
|
/* 65536 = 1 in 32,768 */
|
|
/* 1048576 = 1 in 2,048 */
|
|
/* 268435456 = 1 in 8 */
|
|
/* 536870912 = 1 in 4 */
|
|
/* 1073741824 = 1 in 2 */
|
|
|
|
/* Controls how often the l2_fhdr frame error check will fail. */
|
|
int l2fhdr_error_sim_control = 0;
|
|
|
|
/* Controls how often the unexpected attention check will fail. */
|
|
int unexpected_attention_sim_control = 0;
|
|
|
|
/* Controls how often to simulate an mbuf allocation failure. */
|
|
int mbuf_alloc_failed_sim_control = 0;
|
|
|
|
/* Controls how often to simulate a DMA mapping failure. */
|
|
int dma_map_addr_failed_sim_control = 0;
|
|
|
|
/* Controls how often to simulate a bootcode failure. */
|
|
int bootcode_running_failure_sim_control = 0;
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* PCI Device ID Table */
|
|
/* */
|
|
/* Used by bce_probe() to identify the devices supported by this driver. */
|
|
/****************************************************************************/
|
|
#define BCE_DEVDESC_MAX 64
|
|
|
|
static struct bce_type bce_devs[] = {
|
|
/* BCM5706C Controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3101,
|
|
"HP NC370T Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3106,
|
|
"HP NC370i Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3070,
|
|
"HP NC380T PCIe DP Multifunc Gig Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x1709,
|
|
"HP NC371i Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5706 1000Base-T" },
|
|
|
|
/* BCM5706S controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, HP_VENDORID, 0x3102,
|
|
"HP NC370F Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5706 1000Base-SX" },
|
|
|
|
/* BCM5708C controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708, HP_VENDORID, 0x7037,
|
|
"HP NC373T PCIe Multifunction Gig Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708, HP_VENDORID, 0x7038,
|
|
"HP NC373i Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708, HP_VENDORID, 0x7045,
|
|
"HP NC374m PCIe Multifunction Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5708 1000Base-T" },
|
|
|
|
/* BCM5708S controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708S, HP_VENDORID, 0x1706,
|
|
"HP NC373m Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708S, HP_VENDORID, 0x703b,
|
|
"HP NC373i Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708S, HP_VENDORID, 0x703d,
|
|
"HP NC373F PCIe Multifunc Giga Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708S, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5708 1000Base-SX" },
|
|
|
|
/* BCM5709C controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709, HP_VENDORID, 0x7055,
|
|
"HP NC382i DP Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709, HP_VENDORID, 0x7059,
|
|
"HP NC382T PCIe DP Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5709 1000Base-T" },
|
|
|
|
/* BCM5709S controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709S, HP_VENDORID, 0x171d,
|
|
"HP NC382m DP 1GbE Multifunction BL-c Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709S, HP_VENDORID, 0x7056,
|
|
"HP NC382i DP Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709S, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5709 1000Base-SX" },
|
|
|
|
/* BCM5716 controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5716, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5716 1000Base-T" },
|
|
|
|
{ 0, 0, 0, 0, NULL }
|
|
};
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Supported Flash NVRAM device data. */
|
|
/****************************************************************************/
|
|
static struct flash_spec flash_table[] =
|
|
{
|
|
#define BUFFERED_FLAGS (BCE_NV_BUFFERED | BCE_NV_TRANSLATE)
|
|
#define NONBUFFERED_FLAGS (BCE_NV_WREN)
|
|
|
|
/* Slow EEPROM */
|
|
{0x00000000, 0x40830380, 0x009f0081, 0xa184a053, 0xaf000400,
|
|
BUFFERED_FLAGS, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
|
|
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
|
|
"EEPROM - slow"},
|
|
/* Expansion entry 0001 */
|
|
{0x08000002, 0x4b808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 0001"},
|
|
/* Saifun SA25F010 (non-buffered flash) */
|
|
/* strap, cfg1, & write1 need updates */
|
|
{0x04000001, 0x47808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2,
|
|
"Non-buffered flash (128kB)"},
|
|
/* Saifun SA25F020 (non-buffered flash) */
|
|
/* strap, cfg1, & write1 need updates */
|
|
{0x0c000003, 0x4f808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4,
|
|
"Non-buffered flash (256kB)"},
|
|
/* Expansion entry 0100 */
|
|
{0x11000000, 0x53808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 0100"},
|
|
/* Entry 0101: ST M45PE10 (non-buffered flash, TetonII B0) */
|
|
{0x19000002, 0x5b808201, 0x000500db, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
|
|
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*2,
|
|
"Entry 0101: ST M45PE10 (128kB non-bufferred)"},
|
|
/* Entry 0110: ST M45PE20 (non-buffered flash)*/
|
|
{0x15000001, 0x57808201, 0x000500db, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
|
|
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*4,
|
|
"Entry 0110: ST M45PE20 (256kB non-bufferred)"},
|
|
/* Saifun SA25F005 (non-buffered flash) */
|
|
/* strap, cfg1, & write1 need updates */
|
|
{0x1d000003, 0x5f808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE,
|
|
"Non-buffered flash (64kB)"},
|
|
/* Fast EEPROM */
|
|
{0x22000000, 0x62808380, 0x009f0081, 0xa184a053, 0xaf000400,
|
|
BUFFERED_FLAGS, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
|
|
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
|
|
"EEPROM - fast"},
|
|
/* Expansion entry 1001 */
|
|
{0x2a000002, 0x6b808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1001"},
|
|
/* Expansion entry 1010 */
|
|
{0x26000001, 0x67808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1010"},
|
|
/* ATMEL AT45DB011B (buffered flash) */
|
|
{0x2e000003, 0x6e808273, 0x00570081, 0x68848353, 0xaf000400,
|
|
BUFFERED_FLAGS, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
|
|
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE,
|
|
"Buffered flash (128kB)"},
|
|
/* Expansion entry 1100 */
|
|
{0x33000000, 0x73808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1100"},
|
|
/* Expansion entry 1101 */
|
|
{0x3b000002, 0x7b808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1101"},
|
|
/* Ateml Expansion entry 1110 */
|
|
{0x37000001, 0x76808273, 0x00570081, 0x68848353, 0xaf000400,
|
|
BUFFERED_FLAGS, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
|
|
BUFFERED_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1110 (Atmel)"},
|
|
/* ATMEL AT45DB021B (buffered flash) */
|
|
{0x3f000003, 0x7e808273, 0x00570081, 0x68848353, 0xaf000400,
|
|
BUFFERED_FLAGS, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
|
|
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE*2,
|
|
"Buffered flash (256kB)"},
|
|
};
|
|
|
|
/*
|
|
* The BCM5709 controllers transparently handle the
|
|
* differences between Atmel 264 byte pages and all
|
|
* flash devices which use 256 byte pages, so no
|
|
* logical-to-physical mapping is required in the
|
|
* driver.
|
|
*/
|
|
static struct flash_spec flash_5709 = {
|
|
.flags = BCE_NV_BUFFERED,
|
|
.page_bits = BCM5709_FLASH_PAGE_BITS,
|
|
.page_size = BCM5709_FLASH_PAGE_SIZE,
|
|
.addr_mask = BCM5709_FLASH_BYTE_ADDR_MASK,
|
|
.total_size = BUFFERED_FLASH_TOTAL_SIZE * 2,
|
|
.name = "5709/5716 buffered flash (256kB)",
|
|
};
|
|
|
|
|
|
/****************************************************************************/
|
|
/* FreeBSD device entry points. */
|
|
/****************************************************************************/
|
|
static int bce_probe (device_t);
|
|
static int bce_attach (device_t);
|
|
static int bce_detach (device_t);
|
|
static int bce_shutdown (device_t);
|
|
|
|
|
|
/****************************************************************************/
|
|
/* BCE Debug Data Structure Dump Routines */
|
|
/****************************************************************************/
|
|
#ifdef BCE_DEBUG
|
|
static u32 bce_reg_rd (struct bce_softc *, u32);
|
|
static void bce_reg_wr (struct bce_softc *, u32, u32);
|
|
static void bce_reg_wr16 (struct bce_softc *, u32, u16);
|
|
static u32 bce_ctx_rd (struct bce_softc *, u32, u32);
|
|
static void bce_dump_enet (struct bce_softc *, struct mbuf *);
|
|
static void bce_dump_mbuf (struct bce_softc *, struct mbuf *);
|
|
static void bce_dump_tx_mbuf_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_rx_mbuf_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_pg_mbuf_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_txbd (struct bce_softc *,
|
|
int, struct tx_bd *);
|
|
static void bce_dump_rxbd (struct bce_softc *,
|
|
int, struct rx_bd *);
|
|
static void bce_dump_pgbd (struct bce_softc *,
|
|
int, struct rx_bd *);
|
|
static void bce_dump_l2fhdr (struct bce_softc *,
|
|
int, struct l2_fhdr *);
|
|
static void bce_dump_ctx (struct bce_softc *, u16);
|
|
static void bce_dump_ftqs (struct bce_softc *);
|
|
static void bce_dump_tx_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_rx_bd_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_pg_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_status_block (struct bce_softc *);
|
|
static void bce_dump_stats_block (struct bce_softc *);
|
|
static void bce_dump_driver_state (struct bce_softc *);
|
|
static void bce_dump_hw_state (struct bce_softc *);
|
|
static void bce_dump_shmem_state (struct bce_softc *);
|
|
static void bce_dump_mq_regs (struct bce_softc *);
|
|
static void bce_dump_bc_state (struct bce_softc *);
|
|
static void bce_dump_txp_state (struct bce_softc *, int);
|
|
static void bce_dump_rxp_state (struct bce_softc *, int);
|
|
static void bce_dump_tpat_state (struct bce_softc *, int);
|
|
static void bce_dump_cp_state (struct bce_softc *, int);
|
|
static void bce_dump_com_state (struct bce_softc *, int);
|
|
static void bce_dump_rv2p_state (struct bce_softc *);
|
|
static void bce_breakpoint (struct bce_softc *);
|
|
#endif /*BCE_DEBUG */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* BCE Register/Memory Access Routines */
|
|
/****************************************************************************/
|
|
static u32 bce_reg_rd_ind (struct bce_softc *, u32);
|
|
static void bce_reg_wr_ind (struct bce_softc *, u32, u32);
|
|
static void bce_shmem_wr (struct bce_softc *, u32, u32);
|
|
static u32 bce_shmem_rd (struct bce_softc *, u32);
|
|
static void bce_ctx_wr (struct bce_softc *, u32, u32, u32);
|
|
static int bce_miibus_read_reg (device_t, int, int);
|
|
static int bce_miibus_write_reg (device_t, int, int, int);
|
|
static void bce_miibus_statchg (device_t);
|
|
|
|
#ifdef BCE_DEBUG
|
|
static int bce_sysctl_nvram_dump(SYSCTL_HANDLER_ARGS);
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
static int bce_sysctl_nvram_write(SYSCTL_HANDLER_ARGS);
|
|
#endif
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* BCE NVRAM Access Routines */
|
|
/****************************************************************************/
|
|
static int bce_acquire_nvram_lock (struct bce_softc *);
|
|
static int bce_release_nvram_lock (struct bce_softc *);
|
|
static void bce_enable_nvram_access(struct bce_softc *);
|
|
static void bce_disable_nvram_access(struct bce_softc *);
|
|
static int bce_nvram_read_dword (struct bce_softc *, u32, u8 *, u32);
|
|
static int bce_init_nvram (struct bce_softc *);
|
|
static int bce_nvram_read (struct bce_softc *, u32, u8 *, int);
|
|
static int bce_nvram_test (struct bce_softc *);
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
static int bce_enable_nvram_write (struct bce_softc *);
|
|
static void bce_disable_nvram_write(struct bce_softc *);
|
|
static int bce_nvram_erase_page (struct bce_softc *, u32);
|
|
static int bce_nvram_write_dword (struct bce_softc *, u32, u8 *, u32);
|
|
static int bce_nvram_write (struct bce_softc *, u32, u8 *, int);
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/****************************************************************************/
|
|
static void bce_get_rx_buffer_sizes(struct bce_softc *, int);
|
|
static void bce_get_media (struct bce_softc *);
|
|
static void bce_init_media (struct bce_softc *);
|
|
static u32 bce_get_rphy_link (struct bce_softc *);
|
|
static void bce_dma_map_addr (void *, bus_dma_segment_t *, int, int);
|
|
static int bce_dma_alloc (device_t);
|
|
static void bce_dma_free (struct bce_softc *);
|
|
static void bce_release_resources (struct bce_softc *);
|
|
|
|
/****************************************************************************/
|
|
/* BCE Firmware Synchronization and Load */
|
|
/****************************************************************************/
|
|
static void bce_fw_cap_init (struct bce_softc *);
|
|
static int bce_fw_sync (struct bce_softc *, u32);
|
|
static void bce_load_rv2p_fw (struct bce_softc *, u32 *, u32, u32);
|
|
static void bce_load_cpu_fw (struct bce_softc *,
|
|
struct cpu_reg *, struct fw_info *);
|
|
static void bce_start_cpu (struct bce_softc *, struct cpu_reg *);
|
|
static void bce_halt_cpu (struct bce_softc *, struct cpu_reg *);
|
|
static void bce_start_rxp_cpu (struct bce_softc *);
|
|
static void bce_init_rxp_cpu (struct bce_softc *);
|
|
static void bce_init_txp_cpu (struct bce_softc *);
|
|
static void bce_init_tpat_cpu (struct bce_softc *);
|
|
static void bce_init_cp_cpu (struct bce_softc *);
|
|
static void bce_init_com_cpu (struct bce_softc *);
|
|
static void bce_init_cpus (struct bce_softc *);
|
|
|
|
static void bce_print_adapter_info (struct bce_softc *);
|
|
static void bce_probe_pci_caps (device_t, struct bce_softc *);
|
|
static void bce_stop (struct bce_softc *);
|
|
static int bce_reset (struct bce_softc *, u32);
|
|
static int bce_chipinit (struct bce_softc *);
|
|
static int bce_blockinit (struct bce_softc *);
|
|
|
|
static int bce_init_tx_chain (struct bce_softc *);
|
|
static void bce_free_tx_chain (struct bce_softc *);
|
|
|
|
static int bce_get_rx_buf (struct bce_softc *,
|
|
struct mbuf *, u16 *, u16 *, u32 *);
|
|
static int bce_init_rx_chain (struct bce_softc *);
|
|
static void bce_fill_rx_chain (struct bce_softc *);
|
|
static void bce_free_rx_chain (struct bce_softc *);
|
|
|
|
static int bce_get_pg_buf (struct bce_softc *,
|
|
struct mbuf *, u16 *, u16 *);
|
|
static int bce_init_pg_chain (struct bce_softc *);
|
|
static void bce_fill_pg_chain (struct bce_softc *);
|
|
static void bce_free_pg_chain (struct bce_softc *);
|
|
|
|
static struct mbuf *bce_tso_setup (struct bce_softc *,
|
|
struct mbuf **, u16 *);
|
|
static int bce_tx_encap (struct bce_softc *, struct mbuf **);
|
|
static void bce_start_locked (struct ifnet *);
|
|
static void bce_start (struct ifnet *);
|
|
static int bce_ioctl (struct ifnet *, u_long, caddr_t);
|
|
static void bce_watchdog (struct bce_softc *);
|
|
static int bce_ifmedia_upd (struct ifnet *);
|
|
static int bce_ifmedia_upd_locked (struct ifnet *);
|
|
static void bce_ifmedia_sts (struct ifnet *, struct ifmediareq *);
|
|
static void bce_ifmedia_sts_rphy (struct bce_softc *, struct ifmediareq *);
|
|
static void bce_init_locked (struct bce_softc *);
|
|
static void bce_init (void *);
|
|
static void bce_mgmt_init_locked (struct bce_softc *sc);
|
|
|
|
static int bce_init_ctx (struct bce_softc *);
|
|
static void bce_get_mac_addr (struct bce_softc *);
|
|
static void bce_set_mac_addr (struct bce_softc *);
|
|
static void bce_phy_intr (struct bce_softc *);
|
|
static inline u16 bce_get_hw_rx_cons (struct bce_softc *);
|
|
static void bce_rx_intr (struct bce_softc *);
|
|
static void bce_tx_intr (struct bce_softc *);
|
|
static void bce_disable_intr (struct bce_softc *);
|
|
static void bce_enable_intr (struct bce_softc *, int);
|
|
|
|
static void bce_intr (void *);
|
|
static void bce_set_rx_mode (struct bce_softc *);
|
|
static void bce_stats_update (struct bce_softc *);
|
|
static void bce_tick (void *);
|
|
static void bce_pulse (void *);
|
|
static void bce_add_sysctls (struct bce_softc *);
|
|
|
|
|
|
/****************************************************************************/
|
|
/* FreeBSD device dispatch table. */
|
|
/****************************************************************************/
|
|
static device_method_t bce_methods[] = {
|
|
/* Device interface (device_if.h) */
|
|
DEVMETHOD(device_probe, bce_probe),
|
|
DEVMETHOD(device_attach, bce_attach),
|
|
DEVMETHOD(device_detach, bce_detach),
|
|
DEVMETHOD(device_shutdown, bce_shutdown),
|
|
/* Supported by device interface but not used here. */
|
|
/* DEVMETHOD(device_identify, bce_identify), */
|
|
/* DEVMETHOD(device_suspend, bce_suspend), */
|
|
/* DEVMETHOD(device_resume, bce_resume), */
|
|
/* DEVMETHOD(device_quiesce, bce_quiesce), */
|
|
|
|
/* MII interface (miibus_if.h) */
|
|
DEVMETHOD(miibus_readreg, bce_miibus_read_reg),
|
|
DEVMETHOD(miibus_writereg, bce_miibus_write_reg),
|
|
DEVMETHOD(miibus_statchg, bce_miibus_statchg),
|
|
/* Supported by MII interface but not used here. */
|
|
/* DEVMETHOD(miibus_linkchg, bce_miibus_linkchg), */
|
|
/* DEVMETHOD(miibus_mediainit, bce_miibus_mediainit), */
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t bce_driver = {
|
|
"bce",
|
|
bce_methods,
|
|
sizeof(struct bce_softc)
|
|
};
|
|
|
|
static devclass_t bce_devclass;
|
|
|
|
MODULE_DEPEND(bce, pci, 1, 1, 1);
|
|
MODULE_DEPEND(bce, ether, 1, 1, 1);
|
|
MODULE_DEPEND(bce, miibus, 1, 1, 1);
|
|
|
|
DRIVER_MODULE(bce, pci, bce_driver, bce_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, bce, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Tunable device values */
|
|
/****************************************************************************/
|
|
static SYSCTL_NODE(_hw, OID_AUTO, bce, CTLFLAG_RD, 0, "bce driver parameters");
|
|
|
|
/* Allowable values are TRUE or FALSE */
|
|
static int bce_verbose = TRUE;
|
|
TUNABLE_INT("hw.bce.verbose", &bce_verbose);
|
|
SYSCTL_INT(_hw_bce, OID_AUTO, verbose, CTLFLAG_RDTUN, &bce_verbose, 0,
|
|
"Verbose output enable/disable");
|
|
|
|
/* Allowable values are TRUE or FALSE */
|
|
static int bce_tso_enable = TRUE;
|
|
TUNABLE_INT("hw.bce.tso_enable", &bce_tso_enable);
|
|
SYSCTL_INT(_hw_bce, OID_AUTO, tso_enable, CTLFLAG_RDTUN, &bce_tso_enable, 0,
|
|
"TSO Enable/Disable");
|
|
|
|
/* Allowable values are 0 (IRQ), 1 (MSI/IRQ), and 2 (MSI-X/MSI/IRQ) */
|
|
/* ToDo: Add MSI-X support. */
|
|
static int bce_msi_enable = 1;
|
|
TUNABLE_INT("hw.bce.msi_enable", &bce_msi_enable);
|
|
SYSCTL_INT(_hw_bce, OID_AUTO, msi_enable, CTLFLAG_RDTUN, &bce_msi_enable, 0,
|
|
"MSI-X|MSI|INTx selector");
|
|
|
|
/* Allowable values are 1, 2, 4, 8. */
|
|
static int bce_rx_pages = DEFAULT_RX_PAGES;
|
|
TUNABLE_INT("hw.bce.rx_pages", &bce_rx_pages);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, rx_pages, CTLFLAG_RDTUN, &bce_rx_pages, 0,
|
|
"Receive buffer descriptor pages (1 page = 255 buffer descriptors)");
|
|
|
|
/* Allowable values are 1, 2, 4, 8. */
|
|
static int bce_tx_pages = DEFAULT_TX_PAGES;
|
|
TUNABLE_INT("hw.bce.tx_pages", &bce_tx_pages);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, tx_pages, CTLFLAG_RDTUN, &bce_tx_pages, 0,
|
|
"Transmit buffer descriptor pages (1 page = 255 buffer descriptors)");
|
|
|
|
/* Allowable values are TRUE or FALSE. */
|
|
static int bce_hdr_split = TRUE;
|
|
TUNABLE_INT("hw.bce.hdr_split", &bce_hdr_split);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, hdr_split, CTLFLAG_RDTUN, &bce_hdr_split, 0,
|
|
"Frame header/payload splitting Enable/Disable");
|
|
|
|
/* Allowable values are TRUE or FALSE. */
|
|
static int bce_strict_rx_mtu = FALSE;
|
|
TUNABLE_INT("hw.bce.strict_rx_mtu", &bce_strict_rx_mtu);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, strict_rx_mtu, CTLFLAG_RDTUN,
|
|
&bce_strict_rx_mtu, 0,
|
|
"Enable/Disable strict RX frame size checking");
|
|
|
|
/* Allowable values are 0 ... 100 */
|
|
#ifdef BCE_DEBUG
|
|
/* Generate 1 interrupt for every transmit completion. */
|
|
static int bce_tx_quick_cons_trip_int = 1;
|
|
#else
|
|
/* Generate 1 interrupt for every 20 transmit completions. */
|
|
static int bce_tx_quick_cons_trip_int = DEFAULT_TX_QUICK_CONS_TRIP_INT;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.tx_quick_cons_trip_int", &bce_tx_quick_cons_trip_int);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, tx_quick_cons_trip_int, CTLFLAG_RDTUN,
|
|
&bce_tx_quick_cons_trip_int, 0,
|
|
"Transmit BD trip point during interrupts");
|
|
|
|
/* Allowable values are 0 ... 100 */
|
|
/* Generate 1 interrupt for every transmit completion. */
|
|
#ifdef BCE_DEBUG
|
|
static int bce_tx_quick_cons_trip = 1;
|
|
#else
|
|
/* Generate 1 interrupt for every 20 transmit completions. */
|
|
static int bce_tx_quick_cons_trip = DEFAULT_TX_QUICK_CONS_TRIP;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.tx_quick_cons_trip", &bce_tx_quick_cons_trip);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, tx_quick_cons_trip, CTLFLAG_RDTUN,
|
|
&bce_tx_quick_cons_trip, 0,
|
|
"Transmit BD trip point");
|
|
|
|
/* Allowable values are 0 ... 100 */
|
|
#ifdef BCE_DEBUG
|
|
/* Generate an interrupt if 0us have elapsed since the last TX completion. */
|
|
static int bce_tx_ticks_int = 0;
|
|
#else
|
|
/* Generate an interrupt if 80us have elapsed since the last TX completion. */
|
|
static int bce_tx_ticks_int = DEFAULT_TX_TICKS_INT;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.tx_ticks_int", &bce_tx_ticks_int);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, tx_ticks_int, CTLFLAG_RDTUN,
|
|
&bce_tx_ticks_int, 0, "Transmit ticks count during interrupt");
|
|
|
|
/* Allowable values are 0 ... 100 */
|
|
#ifdef BCE_DEBUG
|
|
/* Generate an interrupt if 0us have elapsed since the last TX completion. */
|
|
static int bce_tx_ticks = 0;
|
|
#else
|
|
/* Generate an interrupt if 80us have elapsed since the last TX completion. */
|
|
static int bce_tx_ticks = DEFAULT_TX_TICKS;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.tx_ticks", &bce_tx_ticks);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, tx_ticks, CTLFLAG_RDTUN,
|
|
&bce_tx_ticks, 0, "Transmit ticks count");
|
|
|
|
/* Allowable values are 1 ... 100 */
|
|
#ifdef BCE_DEBUG
|
|
/* Generate 1 interrupt for every received frame. */
|
|
static int bce_rx_quick_cons_trip_int = 1;
|
|
#else
|
|
/* Generate 1 interrupt for every 6 received frames. */
|
|
static int bce_rx_quick_cons_trip_int = DEFAULT_RX_QUICK_CONS_TRIP_INT;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.rx_quick_cons_trip_int", &bce_rx_quick_cons_trip_int);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, rx_quick_cons_trip_int, CTLFLAG_RDTUN,
|
|
&bce_rx_quick_cons_trip_int, 0,
|
|
"Receive BD trip point duirng interrupts");
|
|
|
|
/* Allowable values are 1 ... 100 */
|
|
#ifdef BCE_DEBUG
|
|
/* Generate 1 interrupt for every received frame. */
|
|
static int bce_rx_quick_cons_trip = 1;
|
|
#else
|
|
/* Generate 1 interrupt for every 6 received frames. */
|
|
static int bce_rx_quick_cons_trip = DEFAULT_RX_QUICK_CONS_TRIP;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.rx_quick_cons_trip", &bce_rx_quick_cons_trip);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, rx_quick_cons_trip, CTLFLAG_RDTUN,
|
|
&bce_rx_quick_cons_trip, 0,
|
|
"Receive BD trip point");
|
|
|
|
/* Allowable values are 0 ... 100 */
|
|
#ifdef BCE_DEBUG
|
|
/* Generate an int. if 0us have elapsed since the last received frame. */
|
|
static int bce_rx_ticks_int = 0;
|
|
#else
|
|
/* Generate an int. if 18us have elapsed since the last received frame. */
|
|
static int bce_rx_ticks_int = DEFAULT_RX_TICKS_INT;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.rx_ticks_int", &bce_rx_ticks_int);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, rx_ticks_int, CTLFLAG_RDTUN,
|
|
&bce_rx_ticks_int, 0, "Receive ticks count during interrupt");
|
|
|
|
/* Allowable values are 0 ... 100 */
|
|
#ifdef BCE_DEBUG
|
|
/* Generate an int. if 0us have elapsed since the last received frame. */
|
|
static int bce_rx_ticks = 0;
|
|
#else
|
|
/* Generate an int. if 18us have elapsed since the last received frame. */
|
|
static int bce_rx_ticks = DEFAULT_RX_TICKS;
|
|
#endif
|
|
TUNABLE_INT("hw.bce.rx_ticks", &bce_rx_ticks);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, rx_ticks, CTLFLAG_RDTUN,
|
|
&bce_rx_ticks, 0, "Receive ticks count");
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device probe function. */
|
|
/* */
|
|
/* Compares the device to the driver's list of supported devices and */
|
|
/* reports back to the OS whether this is the right driver for the device. */
|
|
/* */
|
|
/* Returns: */
|
|
/* BUS_PROBE_DEFAULT on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_probe(device_t dev)
|
|
{
|
|
struct bce_type *t;
|
|
struct bce_softc *sc;
|
|
char *descbuf;
|
|
u16 vid = 0, did = 0, svid = 0, sdid = 0;
|
|
|
|
t = bce_devs;
|
|
|
|
sc = device_get_softc(dev);
|
|
bzero(sc, sizeof(struct bce_softc));
|
|
sc->bce_unit = device_get_unit(dev);
|
|
sc->bce_dev = dev;
|
|
|
|
/* Get the data for the device to be probed. */
|
|
vid = pci_get_vendor(dev);
|
|
did = pci_get_device(dev);
|
|
svid = pci_get_subvendor(dev);
|
|
sdid = pci_get_subdevice(dev);
|
|
|
|
DBPRINT(sc, BCE_EXTREME_LOAD,
|
|
"%s(); VID = 0x%04X, DID = 0x%04X, SVID = 0x%04X, "
|
|
"SDID = 0x%04X\n", __FUNCTION__, vid, did, svid, sdid);
|
|
|
|
/* Look through the list of known devices for a match. */
|
|
while(t->bce_name != NULL) {
|
|
|
|
if ((vid == t->bce_vid) && (did == t->bce_did) &&
|
|
((svid == t->bce_svid) || (t->bce_svid == PCI_ANY_ID)) &&
|
|
((sdid == t->bce_sdid) || (t->bce_sdid == PCI_ANY_ID))) {
|
|
|
|
descbuf = malloc(BCE_DEVDESC_MAX, M_TEMP, M_NOWAIT);
|
|
|
|
if (descbuf == NULL)
|
|
return(ENOMEM);
|
|
|
|
/* Print out the device identity. */
|
|
snprintf(descbuf, BCE_DEVDESC_MAX, "%s (%c%d)",
|
|
t->bce_name, (((pci_read_config(dev,
|
|
PCIR_REVID, 4) & 0xf0) >> 4) + 'A'),
|
|
(pci_read_config(dev, PCIR_REVID, 4) & 0xf));
|
|
|
|
device_set_desc_copy(dev, descbuf);
|
|
free(descbuf, M_TEMP);
|
|
return(BUS_PROBE_DEFAULT);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(ENXIO);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PCI Capabilities Probe Function. */
|
|
/* */
|
|
/* Walks the PCI capabiites list for the device to find what features are */
|
|
/* supported. */
|
|
/* */
|
|
/* Returns: */
|
|
/* None. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_print_adapter_info(struct bce_softc *sc)
|
|
{
|
|
int i = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_LOAD);
|
|
|
|
if (bce_verbose || bootverbose) {
|
|
BCE_PRINTF("ASIC (0x%08X); ", sc->bce_chipid);
|
|
printf("Rev (%c%d); ", ((BCE_CHIP_ID(sc) & 0xf000) >>
|
|
12) + 'A', ((BCE_CHIP_ID(sc) & 0x0ff0) >> 4));
|
|
|
|
|
|
/* Bus info. */
|
|
if (sc->bce_flags & BCE_PCIE_FLAG) {
|
|
printf("Bus (PCIe x%d, ", sc->link_width);
|
|
switch (sc->link_speed) {
|
|
case 1: printf("2.5Gbps); "); break;
|
|
case 2: printf("5Gbps); "); break;
|
|
default: printf("Unknown link speed); ");
|
|
}
|
|
} else {
|
|
printf("Bus (PCI%s, %s, %dMHz); ",
|
|
((sc->bce_flags & BCE_PCIX_FLAG) ? "-X" : ""),
|
|
((sc->bce_flags & BCE_PCI_32BIT_FLAG) ?
|
|
"32-bit" : "64-bit"), sc->bus_speed_mhz);
|
|
}
|
|
|
|
/* Firmware version and device features. */
|
|
printf("B/C (%s); Bufs (RX:%d;TX:%d;PG:%d); Flags (",
|
|
sc->bce_bc_ver, sc->rx_pages, sc->tx_pages,
|
|
(bce_hdr_split == TRUE ? sc->pg_pages: 0));
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
printf("SPLT");
|
|
i++;
|
|
}
|
|
|
|
if (sc->bce_flags & BCE_USING_MSI_FLAG) {
|
|
if (i > 0) printf("|");
|
|
printf("MSI"); i++;
|
|
}
|
|
|
|
if (sc->bce_flags & BCE_USING_MSIX_FLAG) {
|
|
if (i > 0) printf("|");
|
|
printf("MSI-X"); i++;
|
|
}
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG) {
|
|
if (i > 0) printf("|");
|
|
printf("2.5G"); i++;
|
|
}
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) {
|
|
if (i > 0) printf("|");
|
|
printf("Remote PHY(%s)",
|
|
sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG ?
|
|
"FIBER" : "TP"); i++;
|
|
}
|
|
|
|
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG) {
|
|
if (i > 0) printf("|");
|
|
printf("MFW); MFW (%s)\n", sc->bce_mfw_ver);
|
|
} else {
|
|
printf(")\n");
|
|
}
|
|
|
|
printf("Coal (RX:%d,%d,%d,%d; TX:%d,%d,%d,%d)\n",
|
|
sc->bce_rx_quick_cons_trip_int,
|
|
sc->bce_rx_quick_cons_trip,
|
|
sc->bce_rx_ticks_int,
|
|
sc->bce_rx_ticks,
|
|
sc->bce_tx_quick_cons_trip_int,
|
|
sc->bce_tx_quick_cons_trip,
|
|
sc->bce_tx_ticks_int,
|
|
sc->bce_tx_ticks);
|
|
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_LOAD);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PCI Capabilities Probe Function. */
|
|
/* */
|
|
/* Walks the PCI capabiites list for the device to find what features are */
|
|
/* supported. */
|
|
/* */
|
|
/* Returns: */
|
|
/* None. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_probe_pci_caps(device_t dev, struct bce_softc *sc)
|
|
{
|
|
u32 reg;
|
|
|
|
DBENTER(BCE_VERBOSE_LOAD);
|
|
|
|
/* Check if PCI-X capability is enabled. */
|
|
if (pci_find_cap(dev, PCIY_PCIX, ®) == 0) {
|
|
if (reg != 0)
|
|
sc->bce_cap_flags |= BCE_PCIX_CAPABLE_FLAG;
|
|
}
|
|
|
|
/* Check if PCIe capability is enabled. */
|
|
if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) {
|
|
if (reg != 0) {
|
|
u16 link_status = pci_read_config(dev, reg + 0x12, 2);
|
|
DBPRINT(sc, BCE_INFO_LOAD, "PCIe link_status = "
|
|
"0x%08X\n", link_status);
|
|
sc->link_speed = link_status & 0xf;
|
|
sc->link_width = (link_status >> 4) & 0x3f;
|
|
sc->bce_cap_flags |= BCE_PCIE_CAPABLE_FLAG;
|
|
sc->bce_flags |= BCE_PCIE_FLAG;
|
|
}
|
|
}
|
|
|
|
/* Check if MSI capability is enabled. */
|
|
if (pci_find_cap(dev, PCIY_MSI, ®) == 0) {
|
|
if (reg != 0)
|
|
sc->bce_cap_flags |= BCE_MSI_CAPABLE_FLAG;
|
|
}
|
|
|
|
/* Check if MSI-X capability is enabled. */
|
|
if (pci_find_cap(dev, PCIY_MSIX, ®) == 0) {
|
|
if (reg != 0)
|
|
sc->bce_cap_flags |= BCE_MSIX_CAPABLE_FLAG;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_LOAD);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Load and validate user tunable settings. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_set_tunables(struct bce_softc *sc)
|
|
{
|
|
/* Set sysctl values for RX page count. */
|
|
switch (bce_rx_pages) {
|
|
case 1:
|
|
/* fall-through */
|
|
case 2:
|
|
/* fall-through */
|
|
case 4:
|
|
/* fall-through */
|
|
case 8:
|
|
sc->rx_pages = bce_rx_pages;
|
|
break;
|
|
default:
|
|
sc->rx_pages = DEFAULT_RX_PAGES;
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.rx_pages! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_rx_pages, DEFAULT_RX_PAGES);
|
|
}
|
|
|
|
/* ToDo: Consider allowing user setting for pg_pages. */
|
|
sc->pg_pages = min((sc->rx_pages * 4), MAX_PG_PAGES);
|
|
|
|
/* Set sysctl values for TX page count. */
|
|
switch (bce_tx_pages) {
|
|
case 1:
|
|
/* fall-through */
|
|
case 2:
|
|
/* fall-through */
|
|
case 4:
|
|
/* fall-through */
|
|
case 8:
|
|
sc->tx_pages = bce_tx_pages;
|
|
break;
|
|
default:
|
|
sc->tx_pages = DEFAULT_TX_PAGES;
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.tx_pages! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_tx_pages, DEFAULT_TX_PAGES);
|
|
}
|
|
|
|
/*
|
|
* Validate the TX trip point (i.e. the number of
|
|
* TX completions before a status block update is
|
|
* generated and an interrupt is asserted.
|
|
*/
|
|
if (bce_tx_quick_cons_trip_int <= 100) {
|
|
sc->bce_tx_quick_cons_trip_int =
|
|
bce_tx_quick_cons_trip_int;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.tx_quick_cons_trip_int! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_tx_quick_cons_trip_int,
|
|
DEFAULT_TX_QUICK_CONS_TRIP_INT);
|
|
sc->bce_tx_quick_cons_trip_int =
|
|
DEFAULT_TX_QUICK_CONS_TRIP_INT;
|
|
}
|
|
|
|
if (bce_tx_quick_cons_trip <= 100) {
|
|
sc->bce_tx_quick_cons_trip =
|
|
bce_tx_quick_cons_trip;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.tx_quick_cons_trip! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_tx_quick_cons_trip,
|
|
DEFAULT_TX_QUICK_CONS_TRIP);
|
|
sc->bce_tx_quick_cons_trip =
|
|
DEFAULT_TX_QUICK_CONS_TRIP;
|
|
}
|
|
|
|
/*
|
|
* Validate the TX ticks count (i.e. the maximum amount
|
|
* of time to wait after the last TX completion has
|
|
* occurred before a status block update is generated
|
|
* and an interrupt is asserted.
|
|
*/
|
|
if (bce_tx_ticks_int <= 100) {
|
|
sc->bce_tx_ticks_int =
|
|
bce_tx_ticks_int;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.tx_ticks_int! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_tx_ticks_int,
|
|
DEFAULT_TX_TICKS_INT);
|
|
sc->bce_tx_ticks_int =
|
|
DEFAULT_TX_TICKS_INT;
|
|
}
|
|
|
|
if (bce_tx_ticks <= 100) {
|
|
sc->bce_tx_ticks =
|
|
bce_tx_ticks;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.tx_ticks! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_tx_ticks,
|
|
DEFAULT_TX_TICKS);
|
|
sc->bce_tx_ticks =
|
|
DEFAULT_TX_TICKS;
|
|
}
|
|
|
|
/*
|
|
* Validate the RX trip point (i.e. the number of
|
|
* RX frames received before a status block update is
|
|
* generated and an interrupt is asserted.
|
|
*/
|
|
if (bce_rx_quick_cons_trip_int <= 100) {
|
|
sc->bce_rx_quick_cons_trip_int =
|
|
bce_rx_quick_cons_trip_int;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.rx_quick_cons_trip_int! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_rx_quick_cons_trip_int,
|
|
DEFAULT_RX_QUICK_CONS_TRIP_INT);
|
|
sc->bce_rx_quick_cons_trip_int =
|
|
DEFAULT_RX_QUICK_CONS_TRIP_INT;
|
|
}
|
|
|
|
if (bce_rx_quick_cons_trip <= 100) {
|
|
sc->bce_rx_quick_cons_trip =
|
|
bce_rx_quick_cons_trip;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.rx_quick_cons_trip! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_rx_quick_cons_trip,
|
|
DEFAULT_RX_QUICK_CONS_TRIP);
|
|
sc->bce_rx_quick_cons_trip =
|
|
DEFAULT_RX_QUICK_CONS_TRIP;
|
|
}
|
|
|
|
/*
|
|
* Validate the RX ticks count (i.e. the maximum amount
|
|
* of time to wait after the last RX frame has been
|
|
* received before a status block update is generated
|
|
* and an interrupt is asserted.
|
|
*/
|
|
if (bce_rx_ticks_int <= 100) {
|
|
sc->bce_rx_ticks_int = bce_rx_ticks_int;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.rx_ticks_int! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_rx_ticks_int,
|
|
DEFAULT_RX_TICKS_INT);
|
|
sc->bce_rx_ticks_int = DEFAULT_RX_TICKS_INT;
|
|
}
|
|
|
|
if (bce_rx_ticks <= 100) {
|
|
sc->bce_rx_ticks = bce_rx_ticks;
|
|
} else {
|
|
BCE_PRINTF("%s(%d): Illegal value (%d) specified for "
|
|
"hw.bce.rx_ticks! Setting default of %d.\n",
|
|
__FILE__, __LINE__, bce_rx_ticks,
|
|
DEFAULT_RX_TICKS);
|
|
sc->bce_rx_ticks = DEFAULT_RX_TICKS;
|
|
}
|
|
|
|
/* Disabling both RX ticks and RX trips will prevent interrupts. */
|
|
if ((bce_rx_quick_cons_trip == 0) && (bce_rx_ticks == 0)) {
|
|
BCE_PRINTF("%s(%d): Cannot set both hw.bce.rx_ticks and "
|
|
"hw.bce.rx_quick_cons_trip to 0. Setting default values.\n",
|
|
__FILE__, __LINE__);
|
|
sc->bce_rx_ticks = DEFAULT_RX_TICKS;
|
|
sc->bce_rx_quick_cons_trip = DEFAULT_RX_QUICK_CONS_TRIP;
|
|
}
|
|
|
|
/* Disabling both TX ticks and TX trips will prevent interrupts. */
|
|
if ((bce_tx_quick_cons_trip == 0) && (bce_tx_ticks == 0)) {
|
|
BCE_PRINTF("%s(%d): Cannot set both hw.bce.tx_ticks and "
|
|
"hw.bce.tx_quick_cons_trip to 0. Setting default values.\n",
|
|
__FILE__, __LINE__);
|
|
sc->bce_tx_ticks = DEFAULT_TX_TICKS;
|
|
sc->bce_tx_quick_cons_trip = DEFAULT_TX_QUICK_CONS_TRIP;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device attach function. */
|
|
/* */
|
|
/* Allocates device resources, performs secondary chip identification, */
|
|
/* resets and initializes the hardware, and initializes driver instance */
|
|
/* variables. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_attach(device_t dev)
|
|
{
|
|
struct bce_softc *sc;
|
|
struct ifnet *ifp;
|
|
u32 val;
|
|
int error, rid, rc = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->bce_dev = dev;
|
|
|
|
DBENTER(BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
|
|
sc->bce_unit = device_get_unit(dev);
|
|
|
|
/* Set initial device and PHY flags */
|
|
sc->bce_flags = 0;
|
|
sc->bce_phy_flags = 0;
|
|
|
|
bce_set_tunables(sc);
|
|
|
|
pci_enable_busmaster(dev);
|
|
|
|
/* Allocate PCI memory resources. */
|
|
rid = PCIR_BAR(0);
|
|
sc->bce_res_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
|
|
if (sc->bce_res_mem == NULL) {
|
|
BCE_PRINTF("%s(%d): PCI memory allocation failed\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Get various resource handles. */
|
|
sc->bce_btag = rman_get_bustag(sc->bce_res_mem);
|
|
sc->bce_bhandle = rman_get_bushandle(sc->bce_res_mem);
|
|
sc->bce_vhandle = (vm_offset_t) rman_get_virtual(sc->bce_res_mem);
|
|
|
|
bce_probe_pci_caps(dev, sc);
|
|
|
|
rid = 1;
|
|
#if 0
|
|
/* Try allocating MSI-X interrupts. */
|
|
if ((sc->bce_cap_flags & BCE_MSIX_CAPABLE_FLAG) &&
|
|
(bce_msi_enable >= 2) &&
|
|
((sc->bce_res_irq = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE)) != NULL)) {
|
|
|
|
msi_needed = sc->bce_msi_count = 1;
|
|
|
|
if (((error = pci_alloc_msix(dev, &sc->bce_msi_count)) != 0) ||
|
|
(sc->bce_msi_count != msi_needed)) {
|
|
BCE_PRINTF("%s(%d): MSI-X allocation failed! Requested = %d,"
|
|
"Received = %d, error = %d\n", __FILE__, __LINE__,
|
|
msi_needed, sc->bce_msi_count, error);
|
|
sc->bce_msi_count = 0;
|
|
pci_release_msi(dev);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, rid,
|
|
sc->bce_res_irq);
|
|
sc->bce_res_irq = NULL;
|
|
} else {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Using MSI-X interrupt.\n",
|
|
__FUNCTION__);
|
|
sc->bce_flags |= BCE_USING_MSIX_FLAG;
|
|
sc->bce_intr = bce_intr;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Try allocating a MSI interrupt. */
|
|
if ((sc->bce_cap_flags & BCE_MSI_CAPABLE_FLAG) &&
|
|
(bce_msi_enable >= 1) && (sc->bce_msi_count == 0)) {
|
|
sc->bce_msi_count = 1;
|
|
if ((error = pci_alloc_msi(dev, &sc->bce_msi_count)) != 0) {
|
|
BCE_PRINTF("%s(%d): MSI allocation failed! "
|
|
"error = %d\n", __FILE__, __LINE__, error);
|
|
sc->bce_msi_count = 0;
|
|
pci_release_msi(dev);
|
|
} else {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Using MSI "
|
|
"interrupt.\n", __FUNCTION__);
|
|
sc->bce_flags |= BCE_USING_MSI_FLAG;
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709)
|
|
sc->bce_flags |= BCE_ONE_SHOT_MSI_FLAG;
|
|
sc->bce_irq_rid = 1;
|
|
sc->bce_intr = bce_intr;
|
|
}
|
|
}
|
|
|
|
/* Try allocating a legacy interrupt. */
|
|
if (sc->bce_msi_count == 0) {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Using INTx interrupt.\n",
|
|
__FUNCTION__);
|
|
rid = 0;
|
|
sc->bce_intr = bce_intr;
|
|
}
|
|
|
|
sc->bce_res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&rid, RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
sc->bce_irq_rid = rid;
|
|
|
|
/* Report any IRQ allocation errors. */
|
|
if (sc->bce_res_irq == NULL) {
|
|
BCE_PRINTF("%s(%d): PCI map interrupt failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Initialize mutex for the current device instance. */
|
|
BCE_LOCK_INIT(sc, device_get_nameunit(dev));
|
|
|
|
/*
|
|
* Configure byte swap and enable indirect register access.
|
|
* Rely on CPU to do target byte swapping on big endian systems.
|
|
* Access to registers outside of PCI configurtion space are not
|
|
* valid until this is done.
|
|
*/
|
|
pci_write_config(dev, BCE_PCICFG_MISC_CONFIG,
|
|
BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
|
|
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP, 4);
|
|
|
|
/* Save ASIC revsion info. */
|
|
sc->bce_chipid = REG_RD(sc, BCE_MISC_ID);
|
|
|
|
/* Weed out any non-production controller revisions. */
|
|
switch(BCE_CHIP_ID(sc)) {
|
|
case BCE_CHIP_ID_5706_A0:
|
|
case BCE_CHIP_ID_5706_A1:
|
|
case BCE_CHIP_ID_5708_A0:
|
|
case BCE_CHIP_ID_5708_B0:
|
|
case BCE_CHIP_ID_5709_A0:
|
|
case BCE_CHIP_ID_5709_B0:
|
|
case BCE_CHIP_ID_5709_B1:
|
|
case BCE_CHIP_ID_5709_B2:
|
|
BCE_PRINTF("%s(%d): Unsupported controller "
|
|
"revision (%c%d)!\n", __FILE__, __LINE__,
|
|
(((pci_read_config(dev, PCIR_REVID, 4) &
|
|
0xf0) >> 4) + 'A'), (pci_read_config(dev,
|
|
PCIR_REVID, 4) & 0xf));
|
|
rc = ENODEV;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/*
|
|
* The embedded PCIe to PCI-X bridge (EPB)
|
|
* in the 5708 cannot address memory above
|
|
* 40 bits (E7_5708CB1_23043 & E6_5708SB1_23043).
|
|
*/
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708)
|
|
sc->max_bus_addr = BCE_BUS_SPACE_MAXADDR;
|
|
else
|
|
sc->max_bus_addr = BUS_SPACE_MAXADDR;
|
|
|
|
/*
|
|
* Find the base address for shared memory access.
|
|
* Newer versions of bootcode use a signature and offset
|
|
* while older versions use a fixed address.
|
|
*/
|
|
val = REG_RD_IND(sc, BCE_SHM_HDR_SIGNATURE);
|
|
if ((val & BCE_SHM_HDR_SIGNATURE_SIG_MASK) == BCE_SHM_HDR_SIGNATURE_SIG)
|
|
/* Multi-port devices use different offsets in shared memory. */
|
|
sc->bce_shmem_base = REG_RD_IND(sc, BCE_SHM_HDR_ADDR_0 +
|
|
(pci_get_function(sc->bce_dev) << 2));
|
|
else
|
|
sc->bce_shmem_base = HOST_VIEW_SHMEM_BASE;
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_FIRMWARE, "%s(): bce_shmem_base = 0x%08X\n",
|
|
__FUNCTION__, sc->bce_shmem_base);
|
|
|
|
/* Fetch the bootcode revision. */
|
|
val = bce_shmem_rd(sc, BCE_DEV_INFO_BC_REV);
|
|
for (int i = 0, j = 0; i < 3; i++) {
|
|
u8 num;
|
|
|
|
num = (u8) (val >> (24 - (i * 8)));
|
|
for (int k = 100, skip0 = 1; k >= 1; num %= k, k /= 10) {
|
|
if (num >= k || !skip0 || k == 1) {
|
|
sc->bce_bc_ver[j++] = (num / k) + '0';
|
|
skip0 = 0;
|
|
}
|
|
}
|
|
|
|
if (i != 2)
|
|
sc->bce_bc_ver[j++] = '.';
|
|
}
|
|
|
|
/* Check if any management firwmare is enabled. */
|
|
val = bce_shmem_rd(sc, BCE_PORT_FEATURE);
|
|
if (val & BCE_PORT_FEATURE_ASF_ENABLED) {
|
|
sc->bce_flags |= BCE_MFW_ENABLE_FLAG;
|
|
|
|
/* Allow time for firmware to enter the running state. */
|
|
for (int i = 0; i < 30; i++) {
|
|
val = bce_shmem_rd(sc, BCE_BC_STATE_CONDITION);
|
|
if (val & BCE_CONDITION_MFW_RUN_MASK)
|
|
break;
|
|
DELAY(10000);
|
|
}
|
|
|
|
/* Check if management firmware is running. */
|
|
val = bce_shmem_rd(sc, BCE_BC_STATE_CONDITION);
|
|
val &= BCE_CONDITION_MFW_RUN_MASK;
|
|
if ((val != BCE_CONDITION_MFW_RUN_UNKNOWN) &&
|
|
(val != BCE_CONDITION_MFW_RUN_NONE)) {
|
|
u32 addr = bce_shmem_rd(sc, BCE_MFW_VER_PTR);
|
|
int i = 0;
|
|
|
|
/* Read the management firmware version string. */
|
|
for (int j = 0; j < 3; j++) {
|
|
val = bce_reg_rd_ind(sc, addr + j * 4);
|
|
val = bswap32(val);
|
|
memcpy(&sc->bce_mfw_ver[i], &val, 4);
|
|
i += 4;
|
|
}
|
|
} else {
|
|
/* May cause firmware synchronization timeouts. */
|
|
BCE_PRINTF("%s(%d): Management firmware enabled "
|
|
"but not running!\n", __FILE__, __LINE__);
|
|
strcpy(sc->bce_mfw_ver, "NOT RUNNING!");
|
|
|
|
/* ToDo: Any action the driver should take? */
|
|
}
|
|
}
|
|
|
|
/* Get PCI bus information (speed and type). */
|
|
val = REG_RD(sc, BCE_PCICFG_MISC_STATUS);
|
|
if (val & BCE_PCICFG_MISC_STATUS_PCIX_DET) {
|
|
u32 clkreg;
|
|
|
|
sc->bce_flags |= BCE_PCIX_FLAG;
|
|
|
|
clkreg = REG_RD(sc, BCE_PCICFG_PCI_CLOCK_CONTROL_BITS);
|
|
|
|
clkreg &= BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET;
|
|
switch (clkreg) {
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ:
|
|
sc->bus_speed_mhz = 133;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ:
|
|
sc->bus_speed_mhz = 100;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ:
|
|
sc->bus_speed_mhz = 66;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ:
|
|
sc->bus_speed_mhz = 50;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ:
|
|
sc->bus_speed_mhz = 33;
|
|
break;
|
|
}
|
|
} else {
|
|
if (val & BCE_PCICFG_MISC_STATUS_M66EN)
|
|
sc->bus_speed_mhz = 66;
|
|
else
|
|
sc->bus_speed_mhz = 33;
|
|
}
|
|
|
|
if (val & BCE_PCICFG_MISC_STATUS_32BIT_DET)
|
|
sc->bce_flags |= BCE_PCI_32BIT_FLAG;
|
|
|
|
/* Find the media type for the adapter. */
|
|
bce_get_media(sc);
|
|
|
|
/* Reset controller and announce to bootcode that driver is present. */
|
|
if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) {
|
|
BCE_PRINTF("%s(%d): Controller reset failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Initialize the controller. */
|
|
if (bce_chipinit(sc)) {
|
|
BCE_PRINTF("%s(%d): Controller initialization failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Perform NVRAM test. */
|
|
if (bce_nvram_test(sc)) {
|
|
BCE_PRINTF("%s(%d): NVRAM test failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Fetch the permanent Ethernet MAC address. */
|
|
bce_get_mac_addr(sc);
|
|
|
|
/*
|
|
* Trip points control how many BDs
|
|
* should be ready before generating an
|
|
* interrupt while ticks control how long
|
|
* a BD can sit in the chain before
|
|
* generating an interrupt. Set the default
|
|
* values for the RX and TX chains.
|
|
*/
|
|
|
|
/* Not used for L2. */
|
|
sc->bce_comp_prod_trip_int = 0;
|
|
sc->bce_comp_prod_trip = 0;
|
|
sc->bce_com_ticks_int = 0;
|
|
sc->bce_com_ticks = 0;
|
|
sc->bce_cmd_ticks_int = 0;
|
|
sc->bce_cmd_ticks = 0;
|
|
|
|
/* Update statistics once every second. */
|
|
sc->bce_stats_ticks = 1000000 & 0xffff00;
|
|
|
|
/* Store data needed by PHY driver for backplane applications */
|
|
sc->bce_shared_hw_cfg = bce_shmem_rd(sc, BCE_SHARED_HW_CFG_CONFIG);
|
|
sc->bce_port_hw_cfg = bce_shmem_rd(sc, BCE_PORT_HW_CFG_CONFIG);
|
|
|
|
/* Allocate DMA memory resources. */
|
|
if (bce_dma_alloc(dev)) {
|
|
BCE_PRINTF("%s(%d): DMA resource allocation failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Allocate an ifnet structure. */
|
|
ifp = sc->bce_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
BCE_PRINTF("%s(%d): Interface allocation failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Initialize the ifnet interface. */
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = bce_ioctl;
|
|
ifp->if_start = bce_start;
|
|
ifp->if_init = bce_init;
|
|
ifp->if_mtu = ETHERMTU;
|
|
|
|
if (bce_tso_enable) {
|
|
ifp->if_hwassist = BCE_IF_HWASSIST | CSUM_TSO;
|
|
ifp->if_capabilities = BCE_IF_CAPABILITIES | IFCAP_TSO4 |
|
|
IFCAP_VLAN_HWTSO;
|
|
} else {
|
|
ifp->if_hwassist = BCE_IF_HWASSIST;
|
|
ifp->if_capabilities = BCE_IF_CAPABILITIES;
|
|
}
|
|
|
|
#if __FreeBSD_version >= 800505
|
|
/*
|
|
* Introducing IFCAP_LINKSTATE didn't bump __FreeBSD_version
|
|
* so it's approximate value.
|
|
*/
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0)
|
|
ifp->if_capabilities |= IFCAP_LINKSTATE;
|
|
#endif
|
|
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
/*
|
|
* Assume standard mbuf sizes for buffer allocation.
|
|
* This may change later if the MTU size is set to
|
|
* something other than 1500.
|
|
*/
|
|
bce_get_rx_buffer_sizes(sc,
|
|
(ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN));
|
|
|
|
/* Recalculate our buffer allocation sizes. */
|
|
ifp->if_snd.ifq_drv_maxlen = USABLE_TX_BD_ALLOC;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)
|
|
ifp->if_baudrate = IF_Mbps(2500ULL);
|
|
else
|
|
ifp->if_baudrate = IF_Mbps(1000);
|
|
|
|
/* Handle any special PHY initialization for SerDes PHYs. */
|
|
bce_init_media(sc);
|
|
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0) {
|
|
ifmedia_init(&sc->bce_ifmedia, IFM_IMASK, bce_ifmedia_upd,
|
|
bce_ifmedia_sts);
|
|
/*
|
|
* We can't manually override remote PHY's link and assume
|
|
* PHY port configuration(Fiber or TP) is not changed after
|
|
* device attach. This may not be correct though.
|
|
*/
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG) != 0) {
|
|
if (sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG) {
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_2500_SX, 0, NULL);
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_2500_SX | IFM_FDX, 0, NULL);
|
|
}
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_1000_SX, 0, NULL);
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_1000_SX | IFM_FDX, 0, NULL);
|
|
} else {
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_10_T, 0, NULL);
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_10_T | IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_100_TX, 0, NULL);
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_100_TX | IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
ifmedia_add(&sc->bce_ifmedia,
|
|
IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
|
|
}
|
|
ifmedia_add(&sc->bce_ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
ifmedia_set(&sc->bce_ifmedia, IFM_ETHER | IFM_AUTO);
|
|
sc->bce_ifmedia.ifm_media = sc->bce_ifmedia.ifm_cur->ifm_media;
|
|
} else {
|
|
/* MII child bus by attaching the PHY. */
|
|
rc = mii_attach(dev, &sc->bce_miibus, ifp, bce_ifmedia_upd,
|
|
bce_ifmedia_sts, BMSR_DEFCAPMASK, sc->bce_phy_addr,
|
|
MII_OFFSET_ANY, MIIF_DOPAUSE);
|
|
if (rc != 0) {
|
|
BCE_PRINTF("%s(%d): attaching PHYs failed\n", __FILE__,
|
|
__LINE__);
|
|
goto bce_attach_fail;
|
|
}
|
|
}
|
|
|
|
/* Attach to the Ethernet interface list. */
|
|
ether_ifattach(ifp, sc->eaddr);
|
|
|
|
#if __FreeBSD_version < 500000
|
|
callout_init(&sc->bce_tick_callout);
|
|
callout_init(&sc->bce_pulse_callout);
|
|
#else
|
|
callout_init_mtx(&sc->bce_tick_callout, &sc->bce_mtx, 0);
|
|
callout_init_mtx(&sc->bce_pulse_callout, &sc->bce_mtx, 0);
|
|
#endif
|
|
|
|
/* Hookup IRQ last. */
|
|
rc = bus_setup_intr(dev, sc->bce_res_irq, INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, bce_intr, sc, &sc->bce_intrhand);
|
|
|
|
if (rc) {
|
|
BCE_PRINTF("%s(%d): Failed to setup IRQ!\n",
|
|
__FILE__, __LINE__);
|
|
bce_detach(dev);
|
|
goto bce_attach_exit;
|
|
}
|
|
|
|
/*
|
|
* At this point we've acquired all the resources
|
|
* we need to run so there's no turning back, we're
|
|
* cleared for launch.
|
|
*/
|
|
|
|
/* Print some important debugging info. */
|
|
DBRUNMSG(BCE_INFO, bce_dump_driver_state(sc));
|
|
|
|
/* Add the supported sysctls to the kernel. */
|
|
bce_add_sysctls(sc);
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
/*
|
|
* The chip reset earlier notified the bootcode that
|
|
* a driver is present. We now need to start our pulse
|
|
* routine so that the bootcode is reminded that we're
|
|
* still running.
|
|
*/
|
|
bce_pulse(sc);
|
|
|
|
bce_mgmt_init_locked(sc);
|
|
BCE_UNLOCK(sc);
|
|
|
|
/* Finally, print some useful adapter info */
|
|
bce_print_adapter_info(sc);
|
|
DBPRINT(sc, BCE_FATAL, "%s(): sc = %p\n",
|
|
__FUNCTION__, sc);
|
|
|
|
goto bce_attach_exit;
|
|
|
|
bce_attach_fail:
|
|
bce_release_resources(sc);
|
|
|
|
bce_attach_exit:
|
|
|
|
DBEXIT(BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device detach function. */
|
|
/* */
|
|
/* Stops the controller, resets the controller, and releases resources. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_detach(device_t dev)
|
|
{
|
|
struct bce_softc *sc = device_get_softc(dev);
|
|
struct ifnet *ifp;
|
|
u32 msg;
|
|
|
|
DBENTER(BCE_VERBOSE_UNLOAD | BCE_VERBOSE_RESET);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Stop and reset the controller. */
|
|
BCE_LOCK(sc);
|
|
|
|
/* Stop the pulse so the bootcode can go to driver absent state. */
|
|
callout_stop(&sc->bce_pulse_callout);
|
|
|
|
bce_stop(sc);
|
|
if (sc->bce_flags & BCE_NO_WOL_FLAG)
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD_LNK_DN;
|
|
else
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD;
|
|
bce_reset(sc, msg);
|
|
|
|
BCE_UNLOCK(sc);
|
|
|
|
ether_ifdetach(ifp);
|
|
|
|
/* If we have a child device on the MII bus remove it too. */
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0)
|
|
ifmedia_removeall(&sc->bce_ifmedia);
|
|
else {
|
|
bus_generic_detach(dev);
|
|
device_delete_child(dev, sc->bce_miibus);
|
|
}
|
|
|
|
/* Release all remaining resources. */
|
|
bce_release_resources(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_UNLOAD | BCE_VERBOSE_RESET);
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device shutdown function. */
|
|
/* */
|
|
/* Stops and resets the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_shutdown(device_t dev)
|
|
{
|
|
struct bce_softc *sc = device_get_softc(dev);
|
|
u32 msg;
|
|
|
|
DBENTER(BCE_VERBOSE);
|
|
|
|
BCE_LOCK(sc);
|
|
bce_stop(sc);
|
|
if (sc->bce_flags & BCE_NO_WOL_FLAG)
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD_LNK_DN;
|
|
else
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD;
|
|
bce_reset(sc, msg);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
#ifdef BCE_DEBUG
|
|
/****************************************************************************/
|
|
/* Register read. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static u32
|
|
bce_reg_rd(struct bce_softc *sc, u32 offset)
|
|
{
|
|
u32 val = bus_space_read_4(sc->bce_btag, sc->bce_bhandle, offset);
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
return val;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Register write (16 bit). */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_reg_wr16(struct bce_softc *sc, u32 offset, u16 val)
|
|
{
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%04X\n",
|
|
__FUNCTION__, offset, val);
|
|
bus_space_write_2(sc->bce_btag, sc->bce_bhandle, offset, val);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Register write. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_reg_wr(struct bce_softc *sc, u32 offset, u32 val)
|
|
{
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
bus_space_write_4(sc->bce_btag, sc->bce_bhandle, offset, val);
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* Indirect register read. */
|
|
/* */
|
|
/* Reads NetXtreme II registers using an index/data register pair in PCI */
|
|
/* configuration space. Using this mechanism avoids issues with posted */
|
|
/* reads but is much slower than memory-mapped I/O. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static u32
|
|
bce_reg_rd_ind(struct bce_softc *sc, u32 offset)
|
|
{
|
|
device_t dev;
|
|
dev = sc->bce_dev;
|
|
|
|
pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4);
|
|
#ifdef BCE_DEBUG
|
|
{
|
|
u32 val;
|
|
val = pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4);
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
return val;
|
|
}
|
|
#else
|
|
return pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4);
|
|
#endif
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Indirect register write. */
|
|
/* */
|
|
/* Writes NetXtreme II registers using an index/data register pair in PCI */
|
|
/* configuration space. Using this mechanism avoids issues with posted */
|
|
/* writes but is muchh slower than memory-mapped I/O. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_reg_wr_ind(struct bce_softc *sc, u32 offset, u32 val)
|
|
{
|
|
device_t dev;
|
|
dev = sc->bce_dev;
|
|
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
|
|
pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4);
|
|
pci_write_config(dev, BCE_PCICFG_REG_WINDOW, val, 4);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Shared memory write. */
|
|
/* */
|
|
/* Writes NetXtreme II shared memory region. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_shmem_wr(struct bce_softc *sc, u32 offset, u32 val)
|
|
{
|
|
DBPRINT(sc, BCE_VERBOSE_FIRMWARE, "%s(): Writing 0x%08X to "
|
|
"0x%08X\n", __FUNCTION__, val, offset);
|
|
|
|
bce_reg_wr_ind(sc, sc->bce_shmem_base + offset, val);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Shared memory read. */
|
|
/* */
|
|
/* Reads NetXtreme II shared memory region. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The 32 bit value read. */
|
|
/****************************************************************************/
|
|
static u32
|
|
bce_shmem_rd(struct bce_softc *sc, u32 offset)
|
|
{
|
|
u32 val = bce_reg_rd_ind(sc, sc->bce_shmem_base + offset);
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_FIRMWARE, "%s(): Reading 0x%08X from "
|
|
"0x%08X\n", __FUNCTION__, val, offset);
|
|
|
|
return val;
|
|
}
|
|
|
|
|
|
#ifdef BCE_DEBUG
|
|
/****************************************************************************/
|
|
/* Context memory read. */
|
|
/* */
|
|
/* The NetXtreme II controller uses context memory to track connection */
|
|
/* information for L2 and higher network protocols. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The requested 32 bit value of context memory. */
|
|
/****************************************************************************/
|
|
static u32
|
|
bce_ctx_rd(struct bce_softc *sc, u32 cid_addr, u32 ctx_offset)
|
|
{
|
|
u32 idx, offset, retry_cnt = 5, val;
|
|
|
|
DBRUNIF((cid_addr > MAX_CID_ADDR || ctx_offset & 0x3 ||
|
|
cid_addr & CTX_MASK), BCE_PRINTF("%s(): Invalid CID "
|
|
"address: 0x%08X.\n", __FUNCTION__, cid_addr));
|
|
|
|
offset = ctx_offset + cid_addr;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
|
|
REG_WR(sc, BCE_CTX_CTX_CTRL, (offset | BCE_CTX_CTX_CTRL_READ_REQ));
|
|
|
|
for (idx = 0; idx < retry_cnt; idx++) {
|
|
val = REG_RD(sc, BCE_CTX_CTX_CTRL);
|
|
if ((val & BCE_CTX_CTX_CTRL_READ_REQ) == 0)
|
|
break;
|
|
DELAY(5);
|
|
}
|
|
|
|
if (val & BCE_CTX_CTX_CTRL_READ_REQ)
|
|
BCE_PRINTF("%s(%d); Unable to read CTX memory: "
|
|
"cid_addr = 0x%08X, offset = 0x%08X!\n",
|
|
__FILE__, __LINE__, cid_addr, ctx_offset);
|
|
|
|
val = REG_RD(sc, BCE_CTX_CTX_DATA);
|
|
} else {
|
|
REG_WR(sc, BCE_CTX_DATA_ADR, offset);
|
|
val = REG_RD(sc, BCE_CTX_DATA);
|
|
}
|
|
|
|
DBPRINT(sc, BCE_EXTREME_CTX, "%s(); cid_addr = 0x%08X, offset = 0x%08X, "
|
|
"val = 0x%08X\n", __FUNCTION__, cid_addr, ctx_offset, val);
|
|
|
|
return(val);
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Context memory write. */
|
|
/* */
|
|
/* The NetXtreme II controller uses context memory to track connection */
|
|
/* information for L2 and higher network protocols. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_ctx_wr(struct bce_softc *sc, u32 cid_addr, u32 ctx_offset, u32 ctx_val)
|
|
{
|
|
u32 idx, offset = ctx_offset + cid_addr;
|
|
u32 val, retry_cnt = 5;
|
|
|
|
DBPRINT(sc, BCE_EXTREME_CTX, "%s(); cid_addr = 0x%08X, offset = 0x%08X, "
|
|
"val = 0x%08X\n", __FUNCTION__, cid_addr, ctx_offset, ctx_val);
|
|
|
|
DBRUNIF((cid_addr > MAX_CID_ADDR || ctx_offset & 0x3 || cid_addr & CTX_MASK),
|
|
BCE_PRINTF("%s(): Invalid CID address: 0x%08X.\n",
|
|
__FUNCTION__, cid_addr));
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
|
|
REG_WR(sc, BCE_CTX_CTX_DATA, ctx_val);
|
|
REG_WR(sc, BCE_CTX_CTX_CTRL, (offset | BCE_CTX_CTX_CTRL_WRITE_REQ));
|
|
|
|
for (idx = 0; idx < retry_cnt; idx++) {
|
|
val = REG_RD(sc, BCE_CTX_CTX_CTRL);
|
|
if ((val & BCE_CTX_CTX_CTRL_WRITE_REQ) == 0)
|
|
break;
|
|
DELAY(5);
|
|
}
|
|
|
|
if (val & BCE_CTX_CTX_CTRL_WRITE_REQ)
|
|
BCE_PRINTF("%s(%d); Unable to write CTX memory: "
|
|
"cid_addr = 0x%08X, offset = 0x%08X!\n",
|
|
__FILE__, __LINE__, cid_addr, ctx_offset);
|
|
|
|
} else {
|
|
REG_WR(sc, BCE_CTX_DATA_ADR, offset);
|
|
REG_WR(sc, BCE_CTX_DATA, ctx_val);
|
|
}
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PHY register read. */
|
|
/* */
|
|
/* Implements register reads on the MII bus. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_miibus_read_reg(device_t dev, int phy, int reg)
|
|
{
|
|
struct bce_softc *sc;
|
|
u32 val;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Make sure we are accessing the correct PHY address. */
|
|
if (phy != sc->bce_phy_addr) {
|
|
DBPRINT(sc, BCE_INSANE_PHY, "Invalid PHY address %d "
|
|
"for PHY read!\n", phy);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* The 5709S PHY is an IEEE Clause 45 PHY
|
|
* with special mappings to work with IEEE
|
|
* Clause 22 register accesses.
|
|
*/
|
|
if ((sc->bce_phy_flags & BCE_PHY_IEEE_CLAUSE_45_FLAG) != 0) {
|
|
if (reg >= MII_BMCR && reg <= MII_ANLPRNP)
|
|
reg += 0x10;
|
|
}
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
|
|
val = BCE_MIPHY(phy) | BCE_MIREG(reg) |
|
|
BCE_EMAC_MDIO_COMM_COMMAND_READ | BCE_EMAC_MDIO_COMM_DISEXT |
|
|
BCE_EMAC_MDIO_COMM_START_BUSY;
|
|
REG_WR(sc, BCE_EMAC_MDIO_COMM, val);
|
|
|
|
for (i = 0; i < BCE_PHY_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
if (!(val & BCE_EMAC_MDIO_COMM_START_BUSY)) {
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
val &= BCE_EMAC_MDIO_COMM_DATA;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (val & BCE_EMAC_MDIO_COMM_START_BUSY) {
|
|
BCE_PRINTF("%s(%d): Error: PHY read timeout! phy = %d, "
|
|
"reg = 0x%04X\n", __FILE__, __LINE__, phy, reg);
|
|
val = 0x0;
|
|
} else {
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
}
|
|
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val |= BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
DB_PRINT_PHY_REG(reg, val);
|
|
return (val & 0xffff);
|
|
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PHY register write. */
|
|
/* */
|
|
/* Implements register writes on the MII bus. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_miibus_write_reg(device_t dev, int phy, int reg, int val)
|
|
{
|
|
struct bce_softc *sc;
|
|
u32 val1;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Make sure we are accessing the correct PHY address. */
|
|
if (phy != sc->bce_phy_addr) {
|
|
DBPRINT(sc, BCE_INSANE_PHY, "Invalid PHY address %d "
|
|
"for PHY write!\n", phy);
|
|
return(0);
|
|
}
|
|
|
|
DB_PRINT_PHY_REG(reg, val);
|
|
|
|
/*
|
|
* The 5709S PHY is an IEEE Clause 45 PHY
|
|
* with special mappings to work with IEEE
|
|
* Clause 22 register accesses.
|
|
*/
|
|
if ((sc->bce_phy_flags & BCE_PHY_IEEE_CLAUSE_45_FLAG) != 0) {
|
|
if (reg >= MII_BMCR && reg <= MII_ANLPRNP)
|
|
reg += 0x10;
|
|
}
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val1 &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val1);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
val1 = BCE_MIPHY(phy) | BCE_MIREG(reg) | val |
|
|
BCE_EMAC_MDIO_COMM_COMMAND_WRITE |
|
|
BCE_EMAC_MDIO_COMM_START_BUSY | BCE_EMAC_MDIO_COMM_DISEXT;
|
|
REG_WR(sc, BCE_EMAC_MDIO_COMM, val1);
|
|
|
|
for (i = 0; i < BCE_PHY_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
|
|
val1 = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
if (!(val1 & BCE_EMAC_MDIO_COMM_START_BUSY)) {
|
|
DELAY(5);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (val1 & BCE_EMAC_MDIO_COMM_START_BUSY)
|
|
BCE_PRINTF("%s(%d): PHY write timeout!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val1 |= BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val1);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* MII bus status change. */
|
|
/* */
|
|
/* Called by the MII bus driver when the PHY establishes link to set the */
|
|
/* MAC interface registers. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_miibus_statchg(device_t dev)
|
|
{
|
|
struct bce_softc *sc;
|
|
struct mii_data *mii;
|
|
struct ifmediareq ifmr;
|
|
int media_active, media_status, val;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
DBENTER(BCE_VERBOSE_PHY);
|
|
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0) {
|
|
bzero(&ifmr, sizeof(ifmr));
|
|
bce_ifmedia_sts_rphy(sc, &ifmr);
|
|
media_active = ifmr.ifm_active;
|
|
media_status = ifmr.ifm_status;
|
|
} else {
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
media_active = mii->mii_media_active;
|
|
media_status = mii->mii_media_status;
|
|
}
|
|
|
|
val = REG_RD(sc, BCE_EMAC_MODE);
|
|
val &= ~(BCE_EMAC_MODE_PORT | BCE_EMAC_MODE_HALF_DUPLEX |
|
|
BCE_EMAC_MODE_MAC_LOOP | BCE_EMAC_MODE_FORCE_LINK |
|
|
BCE_EMAC_MODE_25G);
|
|
|
|
/* Set MII or GMII interface based on the PHY speed. */
|
|
switch (IFM_SUBTYPE(media_active)) {
|
|
case IFM_10_T:
|
|
if (BCE_CHIP_NUM(sc) != BCE_CHIP_NUM_5706) {
|
|
DBPRINT(sc, BCE_INFO_PHY,
|
|
"Enabling 10Mb interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_MII_10;
|
|
break;
|
|
}
|
|
/* fall-through */
|
|
case IFM_100_TX:
|
|
DBPRINT(sc, BCE_INFO_PHY, "Enabling MII interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_MII;
|
|
break;
|
|
case IFM_2500_SX:
|
|
DBPRINT(sc, BCE_INFO_PHY, "Enabling 2.5G MAC mode.\n");
|
|
val |= BCE_EMAC_MODE_25G;
|
|
/* fall-through */
|
|
case IFM_1000_T:
|
|
case IFM_1000_SX:
|
|
DBPRINT(sc, BCE_INFO_PHY, "Enabling GMII interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_GMII;
|
|
break;
|
|
default:
|
|
DBPRINT(sc, BCE_INFO_PHY, "Unknown link speed, enabling "
|
|
"default GMII interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_GMII;
|
|
}
|
|
|
|
/* Set half or full duplex based on PHY settings. */
|
|
if ((IFM_OPTIONS(media_active) & IFM_FDX) == 0) {
|
|
DBPRINT(sc, BCE_INFO_PHY,
|
|
"Setting Half-Duplex interface.\n");
|
|
val |= BCE_EMAC_MODE_HALF_DUPLEX;
|
|
} else
|
|
DBPRINT(sc, BCE_INFO_PHY,
|
|
"Setting Full-Duplex interface.\n");
|
|
|
|
REG_WR(sc, BCE_EMAC_MODE, val);
|
|
|
|
if ((IFM_OPTIONS(media_active) & IFM_ETH_RXPAUSE) != 0) {
|
|
DBPRINT(sc, BCE_INFO_PHY,
|
|
"%s(): Enabling RX flow control.\n", __FUNCTION__);
|
|
BCE_SETBIT(sc, BCE_EMAC_RX_MODE, BCE_EMAC_RX_MODE_FLOW_EN);
|
|
} else {
|
|
DBPRINT(sc, BCE_INFO_PHY,
|
|
"%s(): Disabling RX flow control.\n", __FUNCTION__);
|
|
BCE_CLRBIT(sc, BCE_EMAC_RX_MODE, BCE_EMAC_RX_MODE_FLOW_EN);
|
|
}
|
|
|
|
if ((IFM_OPTIONS(media_active) & IFM_ETH_TXPAUSE) != 0) {
|
|
DBPRINT(sc, BCE_INFO_PHY,
|
|
"%s(): Enabling TX flow control.\n", __FUNCTION__);
|
|
BCE_SETBIT(sc, BCE_EMAC_TX_MODE, BCE_EMAC_TX_MODE_FLOW_EN);
|
|
sc->bce_flags |= BCE_USING_TX_FLOW_CONTROL;
|
|
} else {
|
|
DBPRINT(sc, BCE_INFO_PHY,
|
|
"%s(): Disabling TX flow control.\n", __FUNCTION__);
|
|
BCE_CLRBIT(sc, BCE_EMAC_TX_MODE, BCE_EMAC_TX_MODE_FLOW_EN);
|
|
sc->bce_flags &= ~BCE_USING_TX_FLOW_CONTROL;
|
|
}
|
|
|
|
/* ToDo: Update watermarks in bce_init_rx_context(). */
|
|
|
|
DBEXIT(BCE_VERBOSE_PHY);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Acquire NVRAM lock. */
|
|
/* */
|
|
/* Before the NVRAM can be accessed the caller must acquire an NVRAM lock. */
|
|
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
|
|
/* for use by the driver. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_acquire_nvram_lock(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/* Request access to the flash interface. */
|
|
REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_SET2);
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
val = REG_RD(sc, BCE_NVM_SW_ARB);
|
|
if (val & BCE_NVM_SW_ARB_ARB_ARB2)
|
|
break;
|
|
|
|
DELAY(5);
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout acquiring NVRAM lock!\n");
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Release NVRAM lock. */
|
|
/* */
|
|
/* When the caller is finished accessing NVRAM the lock must be released. */
|
|
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
|
|
/* for use by the driver. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_release_nvram_lock(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/*
|
|
* Relinquish nvram interface.
|
|
*/
|
|
REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_CLR2);
|
|
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
val = REG_RD(sc, BCE_NVM_SW_ARB);
|
|
if (!(val & BCE_NVM_SW_ARB_ARB_ARB2))
|
|
break;
|
|
|
|
DELAY(5);
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout releasing NVRAM lock!\n");
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Enable NVRAM write access. */
|
|
/* */
|
|
/* Before writing to NVRAM the caller must enable NVRAM writes. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_enable_nvram_write(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_MISC_CFG);
|
|
REG_WR(sc, BCE_MISC_CFG, val | BCE_MISC_CFG_NVM_WR_EN_PCI);
|
|
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
int j;
|
|
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_WREN | BCE_NVM_COMMAND_DOIT);
|
|
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_NVM_COMMAND);
|
|
if (val & BCE_NVM_COMMAND_DONE)
|
|
break;
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout writing NVRAM!\n");
|
|
rc = EBUSY;
|
|
}
|
|
}
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Disable NVRAM write access. */
|
|
/* */
|
|
/* When the caller is finished writing to NVRAM write access must be */
|
|
/* disabled. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_disable_nvram_write(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_MISC_CFG);
|
|
REG_WR(sc, BCE_MISC_CFG, val & ~BCE_MISC_CFG_NVM_WR_EN);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Enable NVRAM access. */
|
|
/* */
|
|
/* Before accessing NVRAM for read or write operations the caller must */
|
|
/* enabled NVRAM access. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_enable_nvram_access(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE);
|
|
/* Enable both bits, even on read. */
|
|
REG_WR(sc, BCE_NVM_ACCESS_ENABLE, val |
|
|
BCE_NVM_ACCESS_ENABLE_EN | BCE_NVM_ACCESS_ENABLE_WR_EN);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Disable NVRAM access. */
|
|
/* */
|
|
/* When the caller is finished accessing NVRAM access must be disabled. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_disable_nvram_access(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE);
|
|
|
|
/* Disable both bits, even after read. */
|
|
REG_WR(sc, BCE_NVM_ACCESS_ENABLE, val &
|
|
~(BCE_NVM_ACCESS_ENABLE_EN | BCE_NVM_ACCESS_ENABLE_WR_EN));
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Erase NVRAM page before writing. */
|
|
/* */
|
|
/* Non-buffered flash parts require that a page be erased before it is */
|
|
/* written. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_erase_page(struct bce_softc *sc, u32 offset)
|
|
{
|
|
u32 cmd;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/* Buffered flash doesn't require an erase. */
|
|
if (sc->bce_flash_info->flags & BCE_NV_BUFFERED)
|
|
goto bce_nvram_erase_page_exit;
|
|
|
|
/* Build an erase command. */
|
|
cmd = BCE_NVM_COMMAND_ERASE | BCE_NVM_COMMAND_WR |
|
|
BCE_NVM_COMMAND_DOIT;
|
|
|
|
/*
|
|
* Clear the DONE bit separately, set the NVRAM adress to erase,
|
|
* and issue the erase command.
|
|
*/
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, cmd);
|
|
|
|
/* Wait for completion. */
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
u32 val;
|
|
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_NVM_COMMAND);
|
|
if (val & BCE_NVM_COMMAND_DONE)
|
|
break;
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout erasing NVRAM.\n");
|
|
rc = EBUSY;
|
|
}
|
|
|
|
bce_nvram_erase_page_exit:
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
#endif /* BCE_NVRAM_WRITE_SUPPORT */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Read a dword (32 bits) from NVRAM. */
|
|
/* */
|
|
/* Read a 32 bit word from NVRAM. The caller is assumed to have already */
|
|
/* obtained the NVRAM lock and enabled the controller for NVRAM access. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success and the 32 bit value read, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_read_dword(struct bce_softc *sc,
|
|
u32 offset, u8 *ret_val, u32 cmd_flags)
|
|
{
|
|
u32 cmd;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_EXTREME_NVRAM);
|
|
|
|
/* Build the command word. */
|
|
cmd = BCE_NVM_COMMAND_DOIT | cmd_flags;
|
|
|
|
/* Calculate the offset for buffered flash if translation is used. */
|
|
if (sc->bce_flash_info->flags & BCE_NV_TRANSLATE) {
|
|
offset = ((offset / sc->bce_flash_info->page_size) <<
|
|
sc->bce_flash_info->page_bits) +
|
|
(offset % sc->bce_flash_info->page_size);
|
|
}
|
|
|
|
/*
|
|
* Clear the DONE bit separately, set the address to read,
|
|
* and issue the read.
|
|
*/
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, cmd);
|
|
|
|
/* Wait for completion. */
|
|
for (i = 0; i < NVRAM_TIMEOUT_COUNT; i++) {
|
|
u32 val;
|
|
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_NVM_COMMAND);
|
|
if (val & BCE_NVM_COMMAND_DONE) {
|
|
val = REG_RD(sc, BCE_NVM_READ);
|
|
|
|
val = bce_be32toh(val);
|
|
memcpy(ret_val, &val, 4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Check for errors. */
|
|
if (i >= NVRAM_TIMEOUT_COUNT) {
|
|
BCE_PRINTF("%s(%d): Timeout error reading NVRAM at "
|
|
"offset 0x%08X!\n", __FILE__, __LINE__, offset);
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_EXTREME_NVRAM);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Write a dword (32 bits) to NVRAM. */
|
|
/* */
|
|
/* Write a 32 bit word to NVRAM. The caller is assumed to have already */
|
|
/* obtained the NVRAM lock, enabled the controller for NVRAM access, and */
|
|
/* enabled NVRAM write access. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_write_dword(struct bce_softc *sc, u32 offset, u8 *val,
|
|
u32 cmd_flags)
|
|
{
|
|
u32 cmd, val32;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/* Build the command word. */
|
|
cmd = BCE_NVM_COMMAND_DOIT | BCE_NVM_COMMAND_WR | cmd_flags;
|
|
|
|
/* Calculate the offset for buffered flash if translation is used. */
|
|
if (sc->bce_flash_info->flags & BCE_NV_TRANSLATE) {
|
|
offset = ((offset / sc->bce_flash_info->page_size) <<
|
|
sc->bce_flash_info->page_bits) +
|
|
(offset % sc->bce_flash_info->page_size);
|
|
}
|
|
|
|
/*
|
|
* Clear the DONE bit separately, convert NVRAM data to big-endian,
|
|
* set the NVRAM address to write, and issue the write command
|
|
*/
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
memcpy(&val32, val, 4);
|
|
val32 = htobe32(val32);
|
|
REG_WR(sc, BCE_NVM_WRITE, val32);
|
|
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, cmd);
|
|
|
|
/* Wait for completion. */
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
DELAY(5);
|
|
|
|
if (REG_RD(sc, BCE_NVM_COMMAND) & BCE_NVM_COMMAND_DONE)
|
|
break;
|
|
}
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
BCE_PRINTF("%s(%d): Timeout error writing NVRAM at "
|
|
"offset 0x%08X\n", __FILE__, __LINE__, offset);
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
#endif /* BCE_NVRAM_WRITE_SUPPORT */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize NVRAM access. */
|
|
/* */
|
|
/* Identify the NVRAM device in use and prepare the NVRAM interface to */
|
|
/* access that device. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_nvram(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int j, entry_count, rc = 0;
|
|
struct flash_spec *flash;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
sc->bce_flash_info = &flash_5709;
|
|
goto bce_init_nvram_get_flash_size;
|
|
}
|
|
|
|
/* Determine the selected interface. */
|
|
val = REG_RD(sc, BCE_NVM_CFG1);
|
|
|
|
entry_count = sizeof(flash_table) / sizeof(struct flash_spec);
|
|
|
|
/*
|
|
* Flash reconfiguration is required to support additional
|
|
* NVRAM devices not directly supported in hardware.
|
|
* Check if the flash interface was reconfigured
|
|
* by the bootcode.
|
|
*/
|
|
|
|
if (val & 0x40000000) {
|
|
/* Flash interface reconfigured by bootcode. */
|
|
|
|
DBPRINT(sc,BCE_INFO_LOAD,
|
|
"bce_init_nvram(): Flash WAS reconfigured.\n");
|
|
|
|
for (j = 0, flash = &flash_table[0]; j < entry_count;
|
|
j++, flash++) {
|
|
if ((val & FLASH_BACKUP_STRAP_MASK) ==
|
|
(flash->config1 & FLASH_BACKUP_STRAP_MASK)) {
|
|
sc->bce_flash_info = flash;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
/* Flash interface not yet reconfigured. */
|
|
u32 mask;
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Flash was NOT reconfigured.\n",
|
|
__FUNCTION__);
|
|
|
|
if (val & (1 << 23))
|
|
mask = FLASH_BACKUP_STRAP_MASK;
|
|
else
|
|
mask = FLASH_STRAP_MASK;
|
|
|
|
/* Look for the matching NVRAM device configuration data. */
|
|
for (j = 0, flash = &flash_table[0]; j < entry_count; j++, flash++) {
|
|
|
|
/* Check if the device matches any of the known devices. */
|
|
if ((val & mask) == (flash->strapping & mask)) {
|
|
/* Found a device match. */
|
|
sc->bce_flash_info = flash;
|
|
|
|
/* Request access to the flash interface. */
|
|
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
|
|
return rc;
|
|
|
|
/* Reconfigure the flash interface. */
|
|
bce_enable_nvram_access(sc);
|
|
REG_WR(sc, BCE_NVM_CFG1, flash->config1);
|
|
REG_WR(sc, BCE_NVM_CFG2, flash->config2);
|
|
REG_WR(sc, BCE_NVM_CFG3, flash->config3);
|
|
REG_WR(sc, BCE_NVM_WRITE1, flash->write1);
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Check if a matching device was found. */
|
|
if (j == entry_count) {
|
|
sc->bce_flash_info = NULL;
|
|
BCE_PRINTF("%s(%d): Unknown Flash NVRAM found!\n",
|
|
__FILE__, __LINE__);
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (ENODEV);
|
|
}
|
|
|
|
bce_init_nvram_get_flash_size:
|
|
/* Write the flash config data to the shared memory interface. */
|
|
val = bce_shmem_rd(sc, BCE_SHARED_HW_CFG_CONFIG2);
|
|
val &= BCE_SHARED_HW_CFG2_NVM_SIZE_MASK;
|
|
if (val)
|
|
sc->bce_flash_size = val;
|
|
else
|
|
sc->bce_flash_size = sc->bce_flash_info->total_size;
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Found %s, size = 0x%08X\n",
|
|
__FUNCTION__, sc->bce_flash_info->name,
|
|
sc->bce_flash_info->total_size);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Read an arbitrary range of data from NVRAM. */
|
|
/* */
|
|
/* Prepares the NVRAM interface for access and reads the requested data */
|
|
/* into the supplied buffer. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success and the data read, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_read(struct bce_softc *sc, u32 offset, u8 *ret_buf,
|
|
int buf_size)
|
|
{
|
|
int rc = 0;
|
|
u32 cmd_flags, offset32, len32, extra;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
if (buf_size == 0)
|
|
goto bce_nvram_read_exit;
|
|
|
|
/* Request access to the flash interface. */
|
|
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
|
|
goto bce_nvram_read_exit;
|
|
|
|
/* Enable access to flash interface */
|
|
bce_enable_nvram_access(sc);
|
|
|
|
len32 = buf_size;
|
|
offset32 = offset;
|
|
extra = 0;
|
|
|
|
cmd_flags = 0;
|
|
|
|
if (offset32 & 3) {
|
|
u8 buf[4];
|
|
u32 pre_len;
|
|
|
|
offset32 &= ~3;
|
|
pre_len = 4 - (offset & 3);
|
|
|
|
if (pre_len >= len32) {
|
|
pre_len = len32;
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST | BCE_NVM_COMMAND_LAST;
|
|
}
|
|
else {
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST;
|
|
}
|
|
|
|
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
|
|
|
|
if (rc)
|
|
return rc;
|
|
|
|
memcpy(ret_buf, buf + (offset & 3), pre_len);
|
|
|
|
offset32 += 4;
|
|
ret_buf += pre_len;
|
|
len32 -= pre_len;
|
|
}
|
|
|
|
if (len32 & 3) {
|
|
extra = 4 - (len32 & 3);
|
|
len32 = (len32 + 4) & ~3;
|
|
}
|
|
|
|
if (len32 == 4) {
|
|
u8 buf[4];
|
|
|
|
if (cmd_flags)
|
|
cmd_flags = BCE_NVM_COMMAND_LAST;
|
|
else
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST |
|
|
BCE_NVM_COMMAND_LAST;
|
|
|
|
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
|
|
|
|
memcpy(ret_buf, buf, 4 - extra);
|
|
}
|
|
else if (len32 > 0) {
|
|
u8 buf[4];
|
|
|
|
/* Read the first word. */
|
|
if (cmd_flags)
|
|
cmd_flags = 0;
|
|
else
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST;
|
|
|
|
rc = bce_nvram_read_dword(sc, offset32, ret_buf, cmd_flags);
|
|
|
|
/* Advance to the next dword. */
|
|
offset32 += 4;
|
|
ret_buf += 4;
|
|
len32 -= 4;
|
|
|
|
while (len32 > 4 && rc == 0) {
|
|
rc = bce_nvram_read_dword(sc, offset32, ret_buf, 0);
|
|
|
|
/* Advance to the next dword. */
|
|
offset32 += 4;
|
|
ret_buf += 4;
|
|
len32 -= 4;
|
|
}
|
|
|
|
if (rc)
|
|
goto bce_nvram_read_locked_exit;
|
|
|
|
cmd_flags = BCE_NVM_COMMAND_LAST;
|
|
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
|
|
|
|
memcpy(ret_buf, buf, 4 - extra);
|
|
}
|
|
|
|
bce_nvram_read_locked_exit:
|
|
/* Disable access to flash interface and release the lock. */
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
bce_nvram_read_exit:
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return rc;
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Write an arbitrary range of data from NVRAM. */
|
|
/* */
|
|
/* Prepares the NVRAM interface for write access and writes the requested */
|
|
/* data from the supplied buffer. The caller is responsible for */
|
|
/* calculating any appropriate CRCs. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_write(struct bce_softc *sc, u32 offset, u8 *data_buf,
|
|
int buf_size)
|
|
{
|
|
u32 written, offset32, len32;
|
|
u8 *buf, start[4], end[4];
|
|
int rc = 0;
|
|
int align_start, align_end;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
buf = data_buf;
|
|
offset32 = offset;
|
|
len32 = buf_size;
|
|
align_start = align_end = 0;
|
|
|
|
if ((align_start = (offset32 & 3))) {
|
|
offset32 &= ~3;
|
|
len32 += align_start;
|
|
if ((rc = bce_nvram_read(sc, offset32, start, 4)))
|
|
goto bce_nvram_write_exit;
|
|
}
|
|
|
|
if (len32 & 3) {
|
|
if ((len32 > 4) || !align_start) {
|
|
align_end = 4 - (len32 & 3);
|
|
len32 += align_end;
|
|
if ((rc = bce_nvram_read(sc, offset32 + len32 - 4,
|
|
end, 4))) {
|
|
goto bce_nvram_write_exit;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (align_start || align_end) {
|
|
buf = malloc(len32, M_DEVBUF, M_NOWAIT);
|
|
if (buf == 0) {
|
|
rc = ENOMEM;
|
|
goto bce_nvram_write_exit;
|
|
}
|
|
|
|
if (align_start) {
|
|
memcpy(buf, start, 4);
|
|
}
|
|
|
|
if (align_end) {
|
|
memcpy(buf + len32 - 4, end, 4);
|
|
}
|
|
memcpy(buf + align_start, data_buf, buf_size);
|
|
}
|
|
|
|
written = 0;
|
|
while ((written < len32) && (rc == 0)) {
|
|
u32 page_start, page_end, data_start, data_end;
|
|
u32 addr, cmd_flags;
|
|
int i;
|
|
u8 flash_buffer[264];
|
|
|
|
/* Find the page_start addr */
|
|
page_start = offset32 + written;
|
|
page_start -= (page_start % sc->bce_flash_info->page_size);
|
|
/* Find the page_end addr */
|
|
page_end = page_start + sc->bce_flash_info->page_size;
|
|
/* Find the data_start addr */
|
|
data_start = (written == 0) ? offset32 : page_start;
|
|
/* Find the data_end addr */
|
|
data_end = (page_end > offset32 + len32) ?
|
|
(offset32 + len32) : page_end;
|
|
|
|
/* Request access to the flash interface. */
|
|
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
|
|
goto bce_nvram_write_exit;
|
|
|
|
/* Enable access to flash interface */
|
|
bce_enable_nvram_access(sc);
|
|
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST;
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
int j;
|
|
|
|
/* Read the whole page into the buffer
|
|
* (non-buffer flash only) */
|
|
for (j = 0; j < sc->bce_flash_info->page_size; j += 4) {
|
|
if (j == (sc->bce_flash_info->page_size - 4)) {
|
|
cmd_flags |= BCE_NVM_COMMAND_LAST;
|
|
}
|
|
rc = bce_nvram_read_dword(sc,
|
|
page_start + j,
|
|
&flash_buffer[j],
|
|
cmd_flags);
|
|
|
|
if (rc)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
}
|
|
}
|
|
|
|
/* Enable writes to flash interface (unlock write-protect) */
|
|
if ((rc = bce_enable_nvram_write(sc)) != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
/* Erase the page */
|
|
if ((rc = bce_nvram_erase_page(sc, page_start)) != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
/* Re-enable the write again for the actual write */
|
|
bce_enable_nvram_write(sc);
|
|
|
|
/* Loop to write back the buffer data from page_start to
|
|
* data_start */
|
|
i = 0;
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
for (addr = page_start; addr < data_start;
|
|
addr += 4, i += 4) {
|
|
|
|
rc = bce_nvram_write_dword(sc, addr,
|
|
&flash_buffer[i], cmd_flags);
|
|
|
|
if (rc != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
}
|
|
}
|
|
|
|
/* Loop to write the new data from data_start to data_end */
|
|
for (addr = data_start; addr < data_end; addr += 4, i++) {
|
|
if ((addr == page_end - 4) ||
|
|
((sc->bce_flash_info->flags & BCE_NV_BUFFERED) &&
|
|
(addr == data_end - 4))) {
|
|
|
|
cmd_flags |= BCE_NVM_COMMAND_LAST;
|
|
}
|
|
rc = bce_nvram_write_dword(sc, addr, buf,
|
|
cmd_flags);
|
|
|
|
if (rc != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
buf += 4;
|
|
}
|
|
|
|
/* Loop to write back the buffer data from data_end
|
|
* to page_end */
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
for (addr = data_end; addr < page_end;
|
|
addr += 4, i += 4) {
|
|
|
|
if (addr == page_end-4) {
|
|
cmd_flags = BCE_NVM_COMMAND_LAST;
|
|
}
|
|
rc = bce_nvram_write_dword(sc, addr,
|
|
&flash_buffer[i], cmd_flags);
|
|
|
|
if (rc != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
}
|
|
}
|
|
|
|
/* Disable writes to flash interface (lock write-protect) */
|
|
bce_disable_nvram_write(sc);
|
|
|
|
/* Disable access to flash interface */
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
/* Increment written */
|
|
written += data_end - data_start;
|
|
}
|
|
|
|
goto bce_nvram_write_exit;
|
|
|
|
bce_nvram_write_locked_exit:
|
|
bce_disable_nvram_write(sc);
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
bce_nvram_write_exit:
|
|
if (align_start || align_end)
|
|
free(buf, M_DEVBUF);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
#endif /* BCE_NVRAM_WRITE_SUPPORT */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Verifies that NVRAM is accessible and contains valid data. */
|
|
/* */
|
|
/* Reads the configuration data from NVRAM and verifies that the CRC is */
|
|
/* correct. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_test(struct bce_softc *sc)
|
|
{
|
|
u32 buf[BCE_NVRAM_SIZE / 4];
|
|
u8 *data = (u8 *) buf;
|
|
int rc = 0;
|
|
u32 magic, csum;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM | BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
|
|
/*
|
|
* Check that the device NVRAM is valid by reading
|
|
* the magic value at offset 0.
|
|
*/
|
|
if ((rc = bce_nvram_read(sc, 0, data, 4)) != 0) {
|
|
BCE_PRINTF("%s(%d): Unable to read NVRAM!\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
/*
|
|
* Verify that offset 0 of the NVRAM contains
|
|
* a valid magic number.
|
|
*/
|
|
magic = bce_be32toh(buf[0]);
|
|
if (magic != BCE_NVRAM_MAGIC) {
|
|
rc = ENODEV;
|
|
BCE_PRINTF("%s(%d): Invalid NVRAM magic value! "
|
|
"Expected: 0x%08X, Found: 0x%08X\n",
|
|
__FILE__, __LINE__, BCE_NVRAM_MAGIC, magic);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
/*
|
|
* Verify that the device NVRAM includes valid
|
|
* configuration data.
|
|
*/
|
|
if ((rc = bce_nvram_read(sc, 0x100, data, BCE_NVRAM_SIZE)) != 0) {
|
|
BCE_PRINTF("%s(%d): Unable to read manufacturing "
|
|
"Information from NVRAM!\n", __FILE__, __LINE__);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
csum = ether_crc32_le(data, 0x100);
|
|
if (csum != BCE_CRC32_RESIDUAL) {
|
|
rc = ENODEV;
|
|
BCE_PRINTF("%s(%d): Invalid manufacturing information "
|
|
"NVRAM CRC! Expected: 0x%08X, Found: 0x%08X\n",
|
|
__FILE__, __LINE__, BCE_CRC32_RESIDUAL, csum);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
csum = ether_crc32_le(data + 0x100, 0x100);
|
|
if (csum != BCE_CRC32_RESIDUAL) {
|
|
rc = ENODEV;
|
|
BCE_PRINTF("%s(%d): Invalid feature configuration "
|
|
"information NVRAM CRC! Expected: 0x%08X, "
|
|
"Found: 08%08X\n", __FILE__, __LINE__,
|
|
BCE_CRC32_RESIDUAL, csum);
|
|
}
|
|
|
|
bce_nvram_test_exit:
|
|
DBEXIT(BCE_VERBOSE_NVRAM | BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Calculates the size of the buffers to allocate based on the MTU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_get_rx_buffer_sizes(struct bce_softc *sc, int mtu)
|
|
{
|
|
DBENTER(BCE_VERBOSE_LOAD);
|
|
|
|
/* Use a single allocation type when header splitting enabled. */
|
|
if (bce_hdr_split == TRUE) {
|
|
sc->rx_bd_mbuf_alloc_size = MHLEN;
|
|
/* Make sure offset is 16 byte aligned for hardware. */
|
|
sc->rx_bd_mbuf_align_pad =
|
|
roundup2((MSIZE - MHLEN), 16) - (MSIZE - MHLEN);
|
|
sc->rx_bd_mbuf_data_len = sc->rx_bd_mbuf_alloc_size -
|
|
sc->rx_bd_mbuf_align_pad;
|
|
sc->pg_bd_mbuf_alloc_size = MCLBYTES;
|
|
} else {
|
|
if ((mtu + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN +
|
|
ETHER_CRC_LEN) > MCLBYTES) {
|
|
/* Setup for jumbo RX buffer allocations. */
|
|
sc->rx_bd_mbuf_alloc_size = MJUM9BYTES;
|
|
sc->rx_bd_mbuf_align_pad =
|
|
roundup2(MJUM9BYTES, 16) - MJUM9BYTES;
|
|
sc->rx_bd_mbuf_data_len =
|
|
sc->rx_bd_mbuf_alloc_size -
|
|
sc->rx_bd_mbuf_align_pad;
|
|
} else {
|
|
/* Setup for standard RX buffer allocations. */
|
|
sc->rx_bd_mbuf_alloc_size = MCLBYTES;
|
|
sc->rx_bd_mbuf_align_pad =
|
|
roundup2(MCLBYTES, 16) - MCLBYTES;
|
|
sc->rx_bd_mbuf_data_len =
|
|
sc->rx_bd_mbuf_alloc_size -
|
|
sc->rx_bd_mbuf_align_pad;
|
|
}
|
|
}
|
|
|
|
// DBPRINT(sc, BCE_INFO_LOAD,
|
|
DBPRINT(sc, BCE_WARN,
|
|
"%s(): rx_bd_mbuf_alloc_size = %d, rx_bd_mbuf_data_len = %d, "
|
|
"rx_bd_mbuf_align_pad = %d\n", __FUNCTION__,
|
|
sc->rx_bd_mbuf_alloc_size, sc->rx_bd_mbuf_data_len,
|
|
sc->rx_bd_mbuf_align_pad);
|
|
|
|
DBEXIT(BCE_VERBOSE_LOAD);
|
|
|
|
}
|
|
|
|
/****************************************************************************/
|
|
/* Identifies the current media type of the controller and sets the PHY */
|
|
/* address. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_get_media(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_PHY);
|
|
|
|
/* Assume PHY address for copper controllers. */
|
|
sc->bce_phy_addr = 1;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
u32 val = REG_RD(sc, BCE_MISC_DUAL_MEDIA_CTRL);
|
|
u32 bond_id = val & BCE_MISC_DUAL_MEDIA_CTRL_BOND_ID;
|
|
u32 strap;
|
|
|
|
/*
|
|
* The BCM5709S is software configurable
|
|
* for Copper or SerDes operation.
|
|
*/
|
|
if (bond_id == BCE_MISC_DUAL_MEDIA_CTRL_BOND_ID_C) {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "5709 bonded "
|
|
"for copper.\n");
|
|
goto bce_get_media_exit;
|
|
} else if (bond_id == BCE_MISC_DUAL_MEDIA_CTRL_BOND_ID_S) {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "5709 bonded "
|
|
"for dual media.\n");
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
goto bce_get_media_exit;
|
|
}
|
|
|
|
if (val & BCE_MISC_DUAL_MEDIA_CTRL_STRAP_OVERRIDE)
|
|
strap = (val &
|
|
BCE_MISC_DUAL_MEDIA_CTRL_PHY_CTRL) >> 21;
|
|
else
|
|
strap = (val &
|
|
BCE_MISC_DUAL_MEDIA_CTRL_PHY_CTRL_STRAP) >> 8;
|
|
|
|
if (pci_get_function(sc->bce_dev) == 0) {
|
|
switch (strap) {
|
|
case 0x4:
|
|
case 0x5:
|
|
case 0x6:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for SerDes.\n");
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
break;
|
|
default:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for Copper.\n");
|
|
break;
|
|
}
|
|
} else {
|
|
switch (strap) {
|
|
case 0x1:
|
|
case 0x2:
|
|
case 0x4:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for SerDes.\n");
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
break;
|
|
default:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for Copper.\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
} else if (BCE_CHIP_BOND_ID(sc) & BCE_CHIP_BOND_ID_SERDES_BIT)
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) {
|
|
|
|
sc->bce_flags |= BCE_NO_WOL_FLAG;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709)
|
|
sc->bce_phy_flags |= BCE_PHY_IEEE_CLAUSE_45_FLAG;
|
|
|
|
if (BCE_CHIP_NUM(sc) != BCE_CHIP_NUM_5706) {
|
|
/* 5708S/09S/16S use a separate PHY for SerDes. */
|
|
sc->bce_phy_addr = 2;
|
|
|
|
val = bce_shmem_rd(sc, BCE_SHARED_HW_CFG_CONFIG);
|
|
if (val & BCE_SHARED_HW_CFG_PHY_2_5G) {
|
|
sc->bce_phy_flags |=
|
|
BCE_PHY_2_5G_CAPABLE_FLAG;
|
|
DBPRINT(sc, BCE_INFO_LOAD, "Found 2.5Gb "
|
|
"capable adapter\n");
|
|
}
|
|
}
|
|
} else if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708))
|
|
sc->bce_phy_flags |= BCE_PHY_CRC_FIX_FLAG;
|
|
|
|
bce_get_media_exit:
|
|
DBPRINT(sc, (BCE_INFO_LOAD | BCE_INFO_PHY),
|
|
"Using PHY address %d.\n", sc->bce_phy_addr);
|
|
|
|
DBEXIT(BCE_VERBOSE_PHY);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Performs PHY initialization required before MII drivers access the */
|
|
/* device. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_media(struct bce_softc *sc)
|
|
{
|
|
if ((sc->bce_phy_flags & (BCE_PHY_IEEE_CLAUSE_45_FLAG |
|
|
BCE_PHY_REMOTE_CAP_FLAG)) == BCE_PHY_IEEE_CLAUSE_45_FLAG) {
|
|
/*
|
|
* Configure 5709S/5716S PHYs to use traditional IEEE
|
|
* Clause 22 method. Otherwise we have no way to attach
|
|
* the PHY in mii(4) layer. PHY specific configuration
|
|
* is done in mii layer.
|
|
*/
|
|
|
|
/* Select auto-negotiation MMD of the PHY. */
|
|
bce_miibus_write_reg(sc->bce_dev, sc->bce_phy_addr,
|
|
BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_ADDR_EXT);
|
|
bce_miibus_write_reg(sc->bce_dev, sc->bce_phy_addr,
|
|
BRGPHY_ADDR_EXT, BRGPHY_ADDR_EXT_AN_MMD);
|
|
|
|
/* Set IEEE0 block of AN MMD (assumed in brgphy(4) code). */
|
|
bce_miibus_write_reg(sc->bce_dev, sc->bce_phy_addr,
|
|
BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0);
|
|
}
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free any DMA memory owned by the driver. */
|
|
/* */
|
|
/* Scans through each data structre that requires DMA memory and frees */
|
|
/* the memory if allocated. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_dma_free(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_UNLOAD | BCE_VERBOSE_CTX);
|
|
|
|
/* Free, unmap, and destroy the status block. */
|
|
if (sc->status_block != NULL) {
|
|
bus_dmamem_free(
|
|
sc->status_tag,
|
|
sc->status_block,
|
|
sc->status_map);
|
|
sc->status_block = NULL;
|
|
}
|
|
|
|
if (sc->status_map != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->status_tag,
|
|
sc->status_map);
|
|
bus_dmamap_destroy(sc->status_tag,
|
|
sc->status_map);
|
|
sc->status_map = NULL;
|
|
}
|
|
|
|
if (sc->status_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->status_tag);
|
|
sc->status_tag = NULL;
|
|
}
|
|
|
|
|
|
/* Free, unmap, and destroy the statistics block. */
|
|
if (sc->stats_block != NULL) {
|
|
bus_dmamem_free(
|
|
sc->stats_tag,
|
|
sc->stats_block,
|
|
sc->stats_map);
|
|
sc->stats_block = NULL;
|
|
}
|
|
|
|
if (sc->stats_map != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->stats_tag,
|
|
sc->stats_map);
|
|
bus_dmamap_destroy(sc->stats_tag,
|
|
sc->stats_map);
|
|
sc->stats_map = NULL;
|
|
}
|
|
|
|
if (sc->stats_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->stats_tag);
|
|
sc->stats_tag = NULL;
|
|
}
|
|
|
|
|
|
/* Free, unmap and destroy all context memory pages. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
for (i = 0; i < sc->ctx_pages; i++ ) {
|
|
if (sc->ctx_block[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->ctx_tag,
|
|
sc->ctx_block[i],
|
|
sc->ctx_map[i]);
|
|
sc->ctx_block[i] = NULL;
|
|
}
|
|
|
|
if (sc->ctx_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->ctx_tag,
|
|
sc->ctx_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->ctx_tag,
|
|
sc->ctx_map[i]);
|
|
sc->ctx_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the context memory tag. */
|
|
if (sc->ctx_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->ctx_tag);
|
|
sc->ctx_tag = NULL;
|
|
}
|
|
}
|
|
|
|
|
|
/* Free, unmap and destroy all TX buffer descriptor chain pages. */
|
|
for (i = 0; i < sc->tx_pages; i++ ) {
|
|
if (sc->tx_bd_chain[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain[i],
|
|
sc->tx_bd_chain_map[i]);
|
|
sc->tx_bd_chain[i] = NULL;
|
|
}
|
|
|
|
if (sc->tx_bd_chain_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain_map[i]);
|
|
sc->tx_bd_chain_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the TX buffer descriptor tag. */
|
|
if (sc->tx_bd_chain_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->tx_bd_chain_tag);
|
|
sc->tx_bd_chain_tag = NULL;
|
|
}
|
|
|
|
|
|
/* Free, unmap and destroy all RX buffer descriptor chain pages. */
|
|
for (i = 0; i < sc->rx_pages; i++ ) {
|
|
if (sc->rx_bd_chain[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain[i],
|
|
sc->rx_bd_chain_map[i]);
|
|
sc->rx_bd_chain[i] = NULL;
|
|
}
|
|
|
|
if (sc->rx_bd_chain_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i]);
|
|
sc->rx_bd_chain_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the RX buffer descriptor tag. */
|
|
if (sc->rx_bd_chain_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->rx_bd_chain_tag);
|
|
sc->rx_bd_chain_tag = NULL;
|
|
}
|
|
|
|
|
|
/* Free, unmap and destroy all page buffer descriptor chain pages. */
|
|
if (bce_hdr_split == TRUE) {
|
|
for (i = 0; i < sc->pg_pages; i++ ) {
|
|
if (sc->pg_bd_chain[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain[i],
|
|
sc->pg_bd_chain_map[i]);
|
|
sc->pg_bd_chain[i] = NULL;
|
|
}
|
|
|
|
if (sc->pg_bd_chain_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i]);
|
|
sc->pg_bd_chain_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the page buffer descriptor tag. */
|
|
if (sc->pg_bd_chain_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->pg_bd_chain_tag);
|
|
sc->pg_bd_chain_tag = NULL;
|
|
}
|
|
}
|
|
|
|
|
|
/* Unload and destroy the TX mbuf maps. */
|
|
for (i = 0; i < MAX_TX_BD_AVAIL; i++) {
|
|
if (sc->tx_mbuf_map[i] != NULL) {
|
|
bus_dmamap_unload(sc->tx_mbuf_tag,
|
|
sc->tx_mbuf_map[i]);
|
|
bus_dmamap_destroy(sc->tx_mbuf_tag,
|
|
sc->tx_mbuf_map[i]);
|
|
sc->tx_mbuf_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the TX mbuf tag. */
|
|
if (sc->tx_mbuf_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->tx_mbuf_tag);
|
|
sc->tx_mbuf_tag = NULL;
|
|
}
|
|
|
|
/* Unload and destroy the RX mbuf maps. */
|
|
for (i = 0; i < MAX_RX_BD_AVAIL; i++) {
|
|
if (sc->rx_mbuf_map[i] != NULL) {
|
|
bus_dmamap_unload(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[i]);
|
|
bus_dmamap_destroy(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[i]);
|
|
sc->rx_mbuf_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the RX mbuf tag. */
|
|
if (sc->rx_mbuf_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->rx_mbuf_tag);
|
|
sc->rx_mbuf_tag = NULL;
|
|
}
|
|
|
|
/* Unload and destroy the page mbuf maps. */
|
|
if (bce_hdr_split == TRUE) {
|
|
for (i = 0; i < MAX_PG_BD_AVAIL; i++) {
|
|
if (sc->pg_mbuf_map[i] != NULL) {
|
|
bus_dmamap_unload(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[i]);
|
|
bus_dmamap_destroy(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[i]);
|
|
sc->pg_mbuf_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the page mbuf tag. */
|
|
if (sc->pg_mbuf_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->pg_mbuf_tag);
|
|
sc->pg_mbuf_tag = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the parent tag */
|
|
if (sc->parent_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->parent_tag);
|
|
sc->parent_tag = NULL;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_UNLOAD | BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Get DMA memory from the OS. */
|
|
/* */
|
|
/* Validates that the OS has provided DMA buffers in response to a */
|
|
/* bus_dmamap_load() call and saves the physical address of those buffers. */
|
|
/* When the callback is used the OS will return 0 for the mapping function */
|
|
/* (bus_dmamap_load()) so we use the value of map_arg->maxsegs to pass any */
|
|
/* failures back to the caller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
bus_addr_t *busaddr = arg;
|
|
|
|
KASSERT(nseg == 1, ("%s(): Too many segments returned (%d)!",
|
|
__FUNCTION__, nseg));
|
|
/* Simulate a mapping failure. */
|
|
DBRUNIF(DB_RANDOMTRUE(dma_map_addr_failed_sim_control),
|
|
error = ENOMEM);
|
|
|
|
/* ToDo: How to increment debug sim_count variable here? */
|
|
|
|
/* Check for an error and signal the caller that an error occurred. */
|
|
if (error) {
|
|
*busaddr = 0;
|
|
} else {
|
|
*busaddr = segs->ds_addr;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allocate any DMA memory needed by the driver. */
|
|
/* */
|
|
/* Allocates DMA memory needed for the various global structures needed by */
|
|
/* hardware. */
|
|
/* */
|
|
/* Memory alignment requirements: */
|
|
/* +-----------------+----------+----------+----------+----------+ */
|
|
/* | | 5706 | 5708 | 5709 | 5716 | */
|
|
/* +-----------------+----------+----------+----------+----------+ */
|
|
/* |Status Block | 8 bytes | 8 bytes | 16 bytes | 16 bytes | */
|
|
/* |Statistics Block | 8 bytes | 8 bytes | 16 bytes | 16 bytes | */
|
|
/* |RX Buffers | 16 bytes | 16 bytes | 16 bytes | 16 bytes | */
|
|
/* |PG Buffers | none | none | none | none | */
|
|
/* |TX Buffers | none | none | none | none | */
|
|
/* |Chain Pages(1) | 4KiB | 4KiB | 4KiB | 4KiB | */
|
|
/* |Context Memory | | | | | */
|
|
/* +-----------------+----------+----------+----------+----------+ */
|
|
/* */
|
|
/* (1) Must align with CPU page size (BCM_PAGE_SZIE). */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_dma_alloc(device_t dev)
|
|
{
|
|
struct bce_softc *sc;
|
|
int i, error, rc = 0;
|
|
bus_size_t max_size, max_seg_size;
|
|
int max_segments;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
|
|
/*
|
|
* Allocate the parent bus DMA tag appropriate for PCI.
|
|
*/
|
|
if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL,
|
|
&sc->parent_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate parent DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for the status block, allocate and clear the
|
|
* memory, map the memory into DMA space, and fetch the physical
|
|
* address of the block.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag, BCE_DMA_ALIGN,
|
|
BCE_DMA_BOUNDARY, sc->max_bus_addr, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, BCE_STATUS_BLK_SZ, 1, BCE_STATUS_BLK_SZ,
|
|
0, NULL, NULL, &sc->status_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate status block "
|
|
"DMA tag!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
if(bus_dmamem_alloc(sc->status_tag, (void **)&sc->status_block,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT,
|
|
&sc->status_map)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate status block "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->status_tag, sc->status_map,
|
|
sc->status_block, BCE_STATUS_BLK_SZ, bce_dma_map_addr,
|
|
&sc->status_block_paddr, BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map status block "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): status_block_paddr = 0x%jX\n",
|
|
__FUNCTION__, (uintmax_t) sc->status_block_paddr);
|
|
|
|
/*
|
|
* Create a DMA tag for the statistics block, allocate and clear the
|
|
* memory, map the memory into DMA space, and fetch the physical
|
|
* address of the block.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag, BCE_DMA_ALIGN,
|
|
BCE_DMA_BOUNDARY, sc->max_bus_addr, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, BCE_STATS_BLK_SZ, 1, BCE_STATS_BLK_SZ,
|
|
0, NULL, NULL, &sc->stats_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate statistics block "
|
|
"DMA tag!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
if (bus_dmamem_alloc(sc->stats_tag, (void **)&sc->stats_block,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, &sc->stats_map)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate statistics block "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->stats_tag, sc->stats_map,
|
|
sc->stats_block, BCE_STATS_BLK_SZ, bce_dma_map_addr,
|
|
&sc->stats_block_paddr, BUS_DMA_NOWAIT);
|
|
|
|
if(error) {
|
|
BCE_PRINTF("%s(%d): Could not map statistics block "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): stats_block_paddr = 0x%jX\n",
|
|
__FUNCTION__, (uintmax_t) sc->stats_block_paddr);
|
|
|
|
/* BCM5709 uses host memory as cache for context memory. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
sc->ctx_pages = 0x2000 / BCM_PAGE_SIZE;
|
|
if (sc->ctx_pages == 0)
|
|
sc->ctx_pages = 1;
|
|
|
|
DBRUNIF((sc->ctx_pages > 512),
|
|
BCE_PRINTF("%s(%d): Too many CTX pages! %d > 512\n",
|
|
__FILE__, __LINE__, sc->ctx_pages));
|
|
|
|
/*
|
|
* Create a DMA tag for the context pages,
|
|
* allocate and clear the memory, map the
|
|
* memory into DMA space, and fetch the
|
|
* physical address of the block.
|
|
*/
|
|
if(bus_dma_tag_create(sc->parent_tag, BCM_PAGE_SIZE,
|
|
BCE_DMA_BOUNDARY, sc->max_bus_addr, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, BCM_PAGE_SIZE, 1, BCM_PAGE_SIZE,
|
|
0, NULL, NULL, &sc->ctx_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate CTX "
|
|
"DMA tag!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < sc->ctx_pages; i++) {
|
|
|
|
if(bus_dmamem_alloc(sc->ctx_tag,
|
|
(void **)&sc->ctx_block[i],
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT,
|
|
&sc->ctx_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate CTX "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->ctx_tag, sc->ctx_map[i],
|
|
sc->ctx_block[i], BCM_PAGE_SIZE, bce_dma_map_addr,
|
|
&sc->ctx_paddr[i], BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map CTX "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): ctx_paddr[%d] "
|
|
"= 0x%jX\n", __FUNCTION__, i,
|
|
(uintmax_t) sc->ctx_paddr[i]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for the TX buffer descriptor chain,
|
|
* allocate and clear the memory, and fetch the
|
|
* physical address of the block.
|
|
*/
|
|
if(bus_dma_tag_create(sc->parent_tag, BCM_PAGE_SIZE, BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
BCE_TX_CHAIN_PAGE_SZ, 1, BCE_TX_CHAIN_PAGE_SZ, 0,
|
|
NULL, NULL, &sc->tx_bd_chain_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate TX descriptor "
|
|
"chain DMA tag!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < sc->tx_pages; i++) {
|
|
|
|
if(bus_dmamem_alloc(sc->tx_bd_chain_tag,
|
|
(void **)&sc->tx_bd_chain[i],
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT,
|
|
&sc->tx_bd_chain_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate TX descriptor "
|
|
"chain DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain_map[i], sc->tx_bd_chain[i],
|
|
BCE_TX_CHAIN_PAGE_SZ, bce_dma_map_addr,
|
|
&sc->tx_bd_chain_paddr[i], BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map TX descriptor "
|
|
"chain DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): tx_bd_chain_paddr[%d] = "
|
|
"0x%jX\n", __FUNCTION__, i,
|
|
(uintmax_t) sc->tx_bd_chain_paddr[i]);
|
|
}
|
|
|
|
/* Check the required size before mapping to conserve resources. */
|
|
if (bce_tso_enable) {
|
|
max_size = BCE_TSO_MAX_SIZE;
|
|
max_segments = BCE_MAX_SEGMENTS;
|
|
max_seg_size = BCE_TSO_MAX_SEG_SIZE;
|
|
} else {
|
|
max_size = MCLBYTES * BCE_MAX_SEGMENTS;
|
|
max_segments = BCE_MAX_SEGMENTS;
|
|
max_seg_size = MCLBYTES;
|
|
}
|
|
|
|
/* Create a DMA tag for TX mbufs. */
|
|
if (bus_dma_tag_create(sc->parent_tag, 1, BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr, BUS_SPACE_MAXADDR, NULL, NULL, max_size,
|
|
max_segments, max_seg_size, 0, NULL, NULL, &sc->tx_mbuf_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate TX mbuf DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/* Create DMA maps for the TX mbufs clusters. */
|
|
for (i = 0; i < TOTAL_TX_BD_ALLOC; i++) {
|
|
if (bus_dmamap_create(sc->tx_mbuf_tag, BUS_DMA_NOWAIT,
|
|
&sc->tx_mbuf_map[i])) {
|
|
BCE_PRINTF("%s(%d): Unable to create TX mbuf DMA "
|
|
"map!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for the RX buffer descriptor chain,
|
|
* allocate and clear the memory, and fetch the physical
|
|
* address of the blocks.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag, BCM_PAGE_SIZE,
|
|
BCE_DMA_BOUNDARY, BUS_SPACE_MAXADDR,
|
|
sc->max_bus_addr, NULL, NULL,
|
|
BCE_RX_CHAIN_PAGE_SZ, 1, BCE_RX_CHAIN_PAGE_SZ,
|
|
0, NULL, NULL, &sc->rx_bd_chain_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate RX descriptor chain "
|
|
"DMA tag!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < sc->rx_pages; i++) {
|
|
|
|
if (bus_dmamem_alloc(sc->rx_bd_chain_tag,
|
|
(void **)&sc->rx_bd_chain[i],
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT,
|
|
&sc->rx_bd_chain_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate RX descriptor "
|
|
"chain DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i], sc->rx_bd_chain[i],
|
|
BCE_RX_CHAIN_PAGE_SZ, bce_dma_map_addr,
|
|
&sc->rx_bd_chain_paddr[i], BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map RX descriptor "
|
|
"chain DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): rx_bd_chain_paddr[%d] = "
|
|
"0x%jX\n", __FUNCTION__, i,
|
|
(uintmax_t) sc->rx_bd_chain_paddr[i]);
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for RX mbufs.
|
|
*/
|
|
if (bce_hdr_split == TRUE)
|
|
max_size = max_seg_size = ((sc->rx_bd_mbuf_alloc_size < MCLBYTES) ?
|
|
MCLBYTES : sc->rx_bd_mbuf_alloc_size);
|
|
else
|
|
max_size = max_seg_size = MJUM9BYTES;
|
|
max_segments = 1;
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Creating rx_mbuf_tag "
|
|
"(max size = 0x%jX max segments = %d, max segment "
|
|
"size = 0x%jX)\n", __FUNCTION__, (uintmax_t) max_size,
|
|
max_segments, (uintmax_t) max_seg_size);
|
|
|
|
if (bus_dma_tag_create(sc->parent_tag, BCE_RX_BUF_ALIGN,
|
|
BCE_DMA_BOUNDARY, sc->max_bus_addr, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
max_size, max_segments, max_seg_size, 0, NULL, NULL,
|
|
&sc->rx_mbuf_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate RX mbuf DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/* Create DMA maps for the RX mbuf clusters. */
|
|
for (i = 0; i < TOTAL_RX_BD_ALLOC; i++) {
|
|
if (bus_dmamap_create(sc->rx_mbuf_tag, BUS_DMA_NOWAIT,
|
|
&sc->rx_mbuf_map[i])) {
|
|
BCE_PRINTF("%s(%d): Unable to create RX mbuf "
|
|
"DMA map!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
}
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
/*
|
|
* Create a DMA tag for the page buffer descriptor chain,
|
|
* allocate and clear the memory, and fetch the physical
|
|
* address of the blocks.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag, BCM_PAGE_SIZE,
|
|
BCE_DMA_BOUNDARY, BUS_SPACE_MAXADDR, sc->max_bus_addr,
|
|
NULL, NULL, BCE_PG_CHAIN_PAGE_SZ, 1, BCE_PG_CHAIN_PAGE_SZ,
|
|
0, NULL, NULL, &sc->pg_bd_chain_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate page descriptor "
|
|
"chain DMA tag!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < sc->pg_pages; i++) {
|
|
if (bus_dmamem_alloc(sc->pg_bd_chain_tag,
|
|
(void **)&sc->pg_bd_chain[i],
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT,
|
|
&sc->pg_bd_chain_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate page "
|
|
"descriptor chain DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i], sc->pg_bd_chain[i],
|
|
BCE_PG_CHAIN_PAGE_SZ, bce_dma_map_addr,
|
|
&sc->pg_bd_chain_paddr[i], BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map page descriptor "
|
|
"chain DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): pg_bd_chain_paddr[%d] = "
|
|
"0x%jX\n", __FUNCTION__, i,
|
|
(uintmax_t) sc->pg_bd_chain_paddr[i]);
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for page mbufs.
|
|
*/
|
|
max_size = max_seg_size = ((sc->pg_bd_mbuf_alloc_size < MCLBYTES) ?
|
|
MCLBYTES : sc->pg_bd_mbuf_alloc_size);
|
|
|
|
if (bus_dma_tag_create(sc->parent_tag, 1, BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
max_size, 1, max_seg_size, 0, NULL, NULL, &sc->pg_mbuf_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate page mbuf "
|
|
"DMA tag!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/* Create DMA maps for the page mbuf clusters. */
|
|
for (i = 0; i < TOTAL_PG_BD_ALLOC; i++) {
|
|
if (bus_dmamap_create(sc->pg_mbuf_tag, BUS_DMA_NOWAIT,
|
|
&sc->pg_mbuf_map[i])) {
|
|
BCE_PRINTF("%s(%d): Unable to create page mbuf "
|
|
"DMA map!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
}
|
|
}
|
|
|
|
bce_dma_alloc_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Release all resources used by the driver. */
|
|
/* */
|
|
/* Releases all resources acquired by the driver including interrupts, */
|
|
/* interrupt handler, interfaces, mutexes, and DMA memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_release_resources(struct bce_softc *sc)
|
|
{
|
|
device_t dev;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
dev = sc->bce_dev;
|
|
|
|
bce_dma_free(sc);
|
|
|
|
if (sc->bce_intrhand != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Removing interrupt handler.\n");
|
|
bus_teardown_intr(dev, sc->bce_res_irq, sc->bce_intrhand);
|
|
}
|
|
|
|
if (sc->bce_res_irq != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing IRQ.\n");
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->bce_irq_rid,
|
|
sc->bce_res_irq);
|
|
}
|
|
|
|
if (sc->bce_flags & (BCE_USING_MSI_FLAG | BCE_USING_MSIX_FLAG)) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing MSI/MSI-X vector.\n");
|
|
pci_release_msi(dev);
|
|
}
|
|
|
|
if (sc->bce_res_mem != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing PCI memory.\n");
|
|
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(0),
|
|
sc->bce_res_mem);
|
|
}
|
|
|
|
if (sc->bce_ifp != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing IF.\n");
|
|
if_free(sc->bce_ifp);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->bce_mtx))
|
|
BCE_LOCK_DESTROY(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Firmware synchronization. */
|
|
/* */
|
|
/* Before performing certain events such as a chip reset, synchronize with */
|
|
/* the firmware first. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_fw_sync(struct bce_softc *sc, u32 msg_data)
|
|
{
|
|
int i, rc = 0;
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Don't waste any time if we've timed out before. */
|
|
if (sc->bce_fw_timed_out == TRUE) {
|
|
rc = EBUSY;
|
|
goto bce_fw_sync_exit;
|
|
}
|
|
|
|
/* Increment the message sequence number. */
|
|
sc->bce_fw_wr_seq++;
|
|
msg_data |= sc->bce_fw_wr_seq;
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_FIRMWARE, "bce_fw_sync(): msg_data = "
|
|
"0x%08X\n", msg_data);
|
|
|
|
/* Send the message to the bootcode driver mailbox. */
|
|
bce_shmem_wr(sc, BCE_DRV_MB, msg_data);
|
|
|
|
/* Wait for the bootcode to acknowledge the message. */
|
|
for (i = 0; i < FW_ACK_TIME_OUT_MS; i++) {
|
|
/* Check for a response in the bootcode firmware mailbox. */
|
|
val = bce_shmem_rd(sc, BCE_FW_MB);
|
|
if ((val & BCE_FW_MSG_ACK) == (msg_data & BCE_DRV_MSG_SEQ))
|
|
break;
|
|
DELAY(1000);
|
|
}
|
|
|
|
/* If we've timed out, tell bootcode that we've stopped waiting. */
|
|
if (((val & BCE_FW_MSG_ACK) != (msg_data & BCE_DRV_MSG_SEQ)) &&
|
|
((msg_data & BCE_DRV_MSG_DATA) != BCE_DRV_MSG_DATA_WAIT0)) {
|
|
|
|
BCE_PRINTF("%s(%d): Firmware synchronization timeout! "
|
|
"msg_data = 0x%08X\n", __FILE__, __LINE__, msg_data);
|
|
|
|
msg_data &= ~BCE_DRV_MSG_CODE;
|
|
msg_data |= BCE_DRV_MSG_CODE_FW_TIMEOUT;
|
|
|
|
bce_shmem_wr(sc, BCE_DRV_MB, msg_data);
|
|
|
|
sc->bce_fw_timed_out = TRUE;
|
|
rc = EBUSY;
|
|
}
|
|
|
|
bce_fw_sync_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Load Receive Virtual 2 Physical (RV2P) processor firmware. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_load_rv2p_fw(struct bce_softc *sc, u32 *rv2p_code,
|
|
u32 rv2p_code_len, u32 rv2p_proc)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Set the page size used by RV2P. */
|
|
if (rv2p_proc == RV2P_PROC2) {
|
|
BCE_RV2P_PROC2_CHG_MAX_BD_PAGE(USABLE_RX_BD_PER_PAGE);
|
|
}
|
|
|
|
for (i = 0; i < rv2p_code_len; i += 8) {
|
|
REG_WR(sc, BCE_RV2P_INSTR_HIGH, *rv2p_code);
|
|
rv2p_code++;
|
|
REG_WR(sc, BCE_RV2P_INSTR_LOW, *rv2p_code);
|
|
rv2p_code++;
|
|
|
|
if (rv2p_proc == RV2P_PROC1) {
|
|
val = (i / 8) | BCE_RV2P_PROC1_ADDR_CMD_RDWR;
|
|
REG_WR(sc, BCE_RV2P_PROC1_ADDR_CMD, val);
|
|
}
|
|
else {
|
|
val = (i / 8) | BCE_RV2P_PROC2_ADDR_CMD_RDWR;
|
|
REG_WR(sc, BCE_RV2P_PROC2_ADDR_CMD, val);
|
|
}
|
|
}
|
|
|
|
/* Reset the processor, un-stall is done later. */
|
|
if (rv2p_proc == RV2P_PROC1) {
|
|
REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC1_RESET);
|
|
}
|
|
else {
|
|
REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC2_RESET);
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Load RISC processor firmware. */
|
|
/* */
|
|
/* Loads firmware from the file if_bcefw.h into the scratchpad memory */
|
|
/* associated with a particular processor. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_load_cpu_fw(struct bce_softc *sc, struct cpu_reg *cpu_reg,
|
|
struct fw_info *fw)
|
|
{
|
|
u32 offset;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
bce_halt_cpu(sc, cpu_reg);
|
|
|
|
/* Load the Text area. */
|
|
offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base);
|
|
if (fw->text) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->text_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->text[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the Data area. */
|
|
offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base);
|
|
if (fw->data) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->data_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->data[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the SBSS area. */
|
|
offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base);
|
|
if (fw->sbss) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->sbss[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the BSS area. */
|
|
offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base);
|
|
if (fw->bss) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->bss_len/4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->bss[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the Read-Only area. */
|
|
offset = cpu_reg->spad_base +
|
|
(fw->rodata_addr - cpu_reg->mips_view_base);
|
|
if (fw->rodata) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->rodata[j]);
|
|
}
|
|
}
|
|
|
|
/* Clear the pre-fetch instruction and set the FW start address. */
|
|
REG_WR_IND(sc, cpu_reg->inst, 0);
|
|
REG_WR_IND(sc, cpu_reg->pc, fw->start_addr);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Starts the RISC processor. */
|
|
/* */
|
|
/* Assumes the CPU starting address has already been set. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_start_cpu(struct bce_softc *sc, struct cpu_reg *cpu_reg)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Start the CPU. */
|
|
val = REG_RD_IND(sc, cpu_reg->mode);
|
|
val &= ~cpu_reg->mode_value_halt;
|
|
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
|
|
REG_WR_IND(sc, cpu_reg->mode, val);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Halts the RISC processor. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_halt_cpu(struct bce_softc *sc, struct cpu_reg *cpu_reg)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Halt the CPU. */
|
|
val = REG_RD_IND(sc, cpu_reg->mode);
|
|
val |= cpu_reg->mode_value_halt;
|
|
REG_WR_IND(sc, cpu_reg->mode, val);
|
|
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the RX CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_start_rxp_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_RXP_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_RXP_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_RXP_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_RXP_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_RXP_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_RXP_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_RXP_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_RXP_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_RXP_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_RXP_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Starting RX firmware.\n");
|
|
bce_start_cpu(sc, &cpu_reg);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the RX CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_rxp_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_RXP_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_RXP_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_RXP_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_RXP_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_RXP_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_RXP_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_RXP_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_RXP_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_RXP_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_RXP_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
fw.ver_major = bce_RXP_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_RXP_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_RXP_b09FwReleaseFix;
|
|
fw.start_addr = bce_RXP_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_RXP_b09FwTextAddr;
|
|
fw.text_len = bce_RXP_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_RXP_b09FwText;
|
|
|
|
fw.data_addr = bce_RXP_b09FwDataAddr;
|
|
fw.data_len = bce_RXP_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_RXP_b09FwData;
|
|
|
|
fw.sbss_addr = bce_RXP_b09FwSbssAddr;
|
|
fw.sbss_len = bce_RXP_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_RXP_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_RXP_b09FwBssAddr;
|
|
fw.bss_len = bce_RXP_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_RXP_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_RXP_b09FwRodataAddr;
|
|
fw.rodata_len = bce_RXP_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_RXP_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_RXP_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_RXP_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_RXP_b06FwReleaseFix;
|
|
fw.start_addr = bce_RXP_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_RXP_b06FwTextAddr;
|
|
fw.text_len = bce_RXP_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_RXP_b06FwText;
|
|
|
|
fw.data_addr = bce_RXP_b06FwDataAddr;
|
|
fw.data_len = bce_RXP_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_RXP_b06FwData;
|
|
|
|
fw.sbss_addr = bce_RXP_b06FwSbssAddr;
|
|
fw.sbss_len = bce_RXP_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_RXP_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_RXP_b06FwBssAddr;
|
|
fw.bss_len = bce_RXP_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_RXP_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_RXP_b06FwRodataAddr;
|
|
fw.rodata_len = bce_RXP_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_RXP_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading RX firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
|
|
/* Delay RXP start until initialization is complete. */
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the TX CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_txp_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_TXP_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_TXP_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_TXP_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_TXP_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_TXP_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_TXP_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_TXP_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_TXP_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_TXP_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_TXP_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
fw.ver_major = bce_TXP_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_TXP_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_TXP_b09FwReleaseFix;
|
|
fw.start_addr = bce_TXP_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_TXP_b09FwTextAddr;
|
|
fw.text_len = bce_TXP_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TXP_b09FwText;
|
|
|
|
fw.data_addr = bce_TXP_b09FwDataAddr;
|
|
fw.data_len = bce_TXP_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TXP_b09FwData;
|
|
|
|
fw.sbss_addr = bce_TXP_b09FwSbssAddr;
|
|
fw.sbss_len = bce_TXP_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TXP_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_TXP_b09FwBssAddr;
|
|
fw.bss_len = bce_TXP_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TXP_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_TXP_b09FwRodataAddr;
|
|
fw.rodata_len = bce_TXP_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TXP_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_TXP_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_TXP_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_TXP_b06FwReleaseFix;
|
|
fw.start_addr = bce_TXP_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_TXP_b06FwTextAddr;
|
|
fw.text_len = bce_TXP_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TXP_b06FwText;
|
|
|
|
fw.data_addr = bce_TXP_b06FwDataAddr;
|
|
fw.data_len = bce_TXP_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TXP_b06FwData;
|
|
|
|
fw.sbss_addr = bce_TXP_b06FwSbssAddr;
|
|
fw.sbss_len = bce_TXP_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TXP_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_TXP_b06FwBssAddr;
|
|
fw.bss_len = bce_TXP_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TXP_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_TXP_b06FwRodataAddr;
|
|
fw.rodata_len = bce_TXP_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TXP_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading TX firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
bce_start_cpu(sc, &cpu_reg);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the TPAT CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_tpat_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_TPAT_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_TPAT_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_TPAT_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_TPAT_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_TPAT_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_TPAT_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_TPAT_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_TPAT_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_TPAT_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_TPAT_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
fw.ver_major = bce_TPAT_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_TPAT_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_TPAT_b09FwReleaseFix;
|
|
fw.start_addr = bce_TPAT_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_TPAT_b09FwTextAddr;
|
|
fw.text_len = bce_TPAT_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TPAT_b09FwText;
|
|
|
|
fw.data_addr = bce_TPAT_b09FwDataAddr;
|
|
fw.data_len = bce_TPAT_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TPAT_b09FwData;
|
|
|
|
fw.sbss_addr = bce_TPAT_b09FwSbssAddr;
|
|
fw.sbss_len = bce_TPAT_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TPAT_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_TPAT_b09FwBssAddr;
|
|
fw.bss_len = bce_TPAT_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TPAT_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_TPAT_b09FwRodataAddr;
|
|
fw.rodata_len = bce_TPAT_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TPAT_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_TPAT_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_TPAT_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_TPAT_b06FwReleaseFix;
|
|
fw.start_addr = bce_TPAT_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_TPAT_b06FwTextAddr;
|
|
fw.text_len = bce_TPAT_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TPAT_b06FwText;
|
|
|
|
fw.data_addr = bce_TPAT_b06FwDataAddr;
|
|
fw.data_len = bce_TPAT_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TPAT_b06FwData;
|
|
|
|
fw.sbss_addr = bce_TPAT_b06FwSbssAddr;
|
|
fw.sbss_len = bce_TPAT_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TPAT_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_TPAT_b06FwBssAddr;
|
|
fw.bss_len = bce_TPAT_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TPAT_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_TPAT_b06FwRodataAddr;
|
|
fw.rodata_len = bce_TPAT_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TPAT_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading TPAT firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
bce_start_cpu(sc, &cpu_reg);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the CP CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_cp_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_CP_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_CP_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_CP_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_CP_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_CP_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_CP_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_CP_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_CP_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_CP_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_CP_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
fw.ver_major = bce_CP_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_CP_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_CP_b09FwReleaseFix;
|
|
fw.start_addr = bce_CP_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_CP_b09FwTextAddr;
|
|
fw.text_len = bce_CP_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_CP_b09FwText;
|
|
|
|
fw.data_addr = bce_CP_b09FwDataAddr;
|
|
fw.data_len = bce_CP_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_CP_b09FwData;
|
|
|
|
fw.sbss_addr = bce_CP_b09FwSbssAddr;
|
|
fw.sbss_len = bce_CP_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_CP_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_CP_b09FwBssAddr;
|
|
fw.bss_len = bce_CP_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_CP_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_CP_b09FwRodataAddr;
|
|
fw.rodata_len = bce_CP_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_CP_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_CP_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_CP_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_CP_b06FwReleaseFix;
|
|
fw.start_addr = bce_CP_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_CP_b06FwTextAddr;
|
|
fw.text_len = bce_CP_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_CP_b06FwText;
|
|
|
|
fw.data_addr = bce_CP_b06FwDataAddr;
|
|
fw.data_len = bce_CP_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_CP_b06FwData;
|
|
|
|
fw.sbss_addr = bce_CP_b06FwSbssAddr;
|
|
fw.sbss_len = bce_CP_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_CP_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_CP_b06FwBssAddr;
|
|
fw.bss_len = bce_CP_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_CP_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_CP_b06FwRodataAddr;
|
|
fw.rodata_len = bce_CP_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_CP_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading CP firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
bce_start_cpu(sc, &cpu_reg);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the COM CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_com_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_COM_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_COM_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_COM_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_COM_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_COM_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_COM_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_COM_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_COM_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_COM_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_COM_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
fw.ver_major = bce_COM_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_COM_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_COM_b09FwReleaseFix;
|
|
fw.start_addr = bce_COM_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_COM_b09FwTextAddr;
|
|
fw.text_len = bce_COM_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_COM_b09FwText;
|
|
|
|
fw.data_addr = bce_COM_b09FwDataAddr;
|
|
fw.data_len = bce_COM_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_COM_b09FwData;
|
|
|
|
fw.sbss_addr = bce_COM_b09FwSbssAddr;
|
|
fw.sbss_len = bce_COM_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_COM_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_COM_b09FwBssAddr;
|
|
fw.bss_len = bce_COM_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_COM_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_COM_b09FwRodataAddr;
|
|
fw.rodata_len = bce_COM_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_COM_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_COM_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_COM_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_COM_b06FwReleaseFix;
|
|
fw.start_addr = bce_COM_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_COM_b06FwTextAddr;
|
|
fw.text_len = bce_COM_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_COM_b06FwText;
|
|
|
|
fw.data_addr = bce_COM_b06FwDataAddr;
|
|
fw.data_len = bce_COM_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_COM_b06FwData;
|
|
|
|
fw.sbss_addr = bce_COM_b06FwSbssAddr;
|
|
fw.sbss_len = bce_COM_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_COM_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_COM_b06FwBssAddr;
|
|
fw.bss_len = bce_COM_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_COM_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_COM_b06FwRodataAddr;
|
|
fw.rodata_len = bce_COM_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_COM_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading COM firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
bce_start_cpu(sc, &cpu_reg);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the RV2P, RX, TX, TPAT, COM, and CP CPUs. */
|
|
/* */
|
|
/* Loads the firmware for each CPU and starts the CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_cpus(struct bce_softc *sc)
|
|
{
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
|
|
if ((BCE_CHIP_REV(sc) == BCE_CHIP_REV_Ax)) {
|
|
bce_load_rv2p_fw(sc, bce_xi90_rv2p_proc1,
|
|
sizeof(bce_xi90_rv2p_proc1), RV2P_PROC1);
|
|
bce_load_rv2p_fw(sc, bce_xi90_rv2p_proc2,
|
|
sizeof(bce_xi90_rv2p_proc2), RV2P_PROC2);
|
|
} else {
|
|
bce_load_rv2p_fw(sc, bce_xi_rv2p_proc1,
|
|
sizeof(bce_xi_rv2p_proc1), RV2P_PROC1);
|
|
bce_load_rv2p_fw(sc, bce_xi_rv2p_proc2,
|
|
sizeof(bce_xi_rv2p_proc2), RV2P_PROC2);
|
|
}
|
|
|
|
} else {
|
|
bce_load_rv2p_fw(sc, bce_rv2p_proc1,
|
|
sizeof(bce_rv2p_proc1), RV2P_PROC1);
|
|
bce_load_rv2p_fw(sc, bce_rv2p_proc2,
|
|
sizeof(bce_rv2p_proc2), RV2P_PROC2);
|
|
}
|
|
|
|
bce_init_rxp_cpu(sc);
|
|
bce_init_txp_cpu(sc);
|
|
bce_init_tpat_cpu(sc);
|
|
bce_init_com_cpu(sc);
|
|
bce_init_cp_cpu(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize context memory. */
|
|
/* */
|
|
/* Clears the memory associated with each Context ID (CID). */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_ctx(struct bce_softc *sc)
|
|
{
|
|
u32 offset, val, vcid_addr;
|
|
int i, j, rc, retry_cnt;
|
|
|
|
rc = 0;
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
retry_cnt = CTX_INIT_RETRY_COUNT;
|
|
|
|
DBPRINT(sc, BCE_INFO_CTX, "Initializing 5709 context.\n");
|
|
|
|
/*
|
|
* BCM5709 context memory may be cached
|
|
* in host memory so prepare the host memory
|
|
* for access.
|
|
*/
|
|
val = BCE_CTX_COMMAND_ENABLED |
|
|
BCE_CTX_COMMAND_MEM_INIT | (1 << 12);
|
|
val |= (BCM_PAGE_BITS - 8) << 16;
|
|
REG_WR(sc, BCE_CTX_COMMAND, val);
|
|
|
|
/* Wait for mem init command to complete. */
|
|
for (i = 0; i < retry_cnt; i++) {
|
|
val = REG_RD(sc, BCE_CTX_COMMAND);
|
|
if (!(val & BCE_CTX_COMMAND_MEM_INIT))
|
|
break;
|
|
DELAY(2);
|
|
}
|
|
if ((val & BCE_CTX_COMMAND_MEM_INIT) != 0) {
|
|
BCE_PRINTF("%s(): Context memory initialization failed!\n",
|
|
__FUNCTION__);
|
|
rc = EBUSY;
|
|
goto init_ctx_fail;
|
|
}
|
|
|
|
for (i = 0; i < sc->ctx_pages; i++) {
|
|
/* Set the physical address of the context memory. */
|
|
REG_WR(sc, BCE_CTX_HOST_PAGE_TBL_DATA0,
|
|
BCE_ADDR_LO(sc->ctx_paddr[i] & 0xfffffff0) |
|
|
BCE_CTX_HOST_PAGE_TBL_DATA0_VALID);
|
|
REG_WR(sc, BCE_CTX_HOST_PAGE_TBL_DATA1,
|
|
BCE_ADDR_HI(sc->ctx_paddr[i]));
|
|
REG_WR(sc, BCE_CTX_HOST_PAGE_TBL_CTRL, i |
|
|
BCE_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ);
|
|
|
|
/* Verify the context memory write was successful. */
|
|
for (j = 0; j < retry_cnt; j++) {
|
|
val = REG_RD(sc, BCE_CTX_HOST_PAGE_TBL_CTRL);
|
|
if ((val &
|
|
BCE_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) == 0)
|
|
break;
|
|
DELAY(5);
|
|
}
|
|
if ((val & BCE_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) != 0) {
|
|
BCE_PRINTF("%s(): Failed to initialize "
|
|
"context page %d!\n", __FUNCTION__, i);
|
|
rc = EBUSY;
|
|
goto init_ctx_fail;
|
|
}
|
|
}
|
|
} else {
|
|
|
|
DBPRINT(sc, BCE_INFO, "Initializing 5706/5708 context.\n");
|
|
|
|
/*
|
|
* For the 5706/5708, context memory is local to
|
|
* the controller, so initialize the controller
|
|
* context memory.
|
|
*/
|
|
|
|
vcid_addr = GET_CID_ADDR(96);
|
|
while (vcid_addr) {
|
|
|
|
vcid_addr -= PHY_CTX_SIZE;
|
|
|
|
REG_WR(sc, BCE_CTX_VIRT_ADDR, 0);
|
|
REG_WR(sc, BCE_CTX_PAGE_TBL, vcid_addr);
|
|
|
|
for(offset = 0; offset < PHY_CTX_SIZE; offset += 4) {
|
|
CTX_WR(sc, 0x00, offset, 0);
|
|
}
|
|
|
|
REG_WR(sc, BCE_CTX_VIRT_ADDR, vcid_addr);
|
|
REG_WR(sc, BCE_CTX_PAGE_TBL, vcid_addr);
|
|
}
|
|
|
|
}
|
|
init_ctx_fail:
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Fetch the permanent MAC address of the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_get_mac_addr(struct bce_softc *sc)
|
|
{
|
|
u32 mac_lo = 0, mac_hi = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/*
|
|
* The NetXtreme II bootcode populates various NIC
|
|
* power-on and runtime configuration items in a
|
|
* shared memory area. The factory configured MAC
|
|
* address is available from both NVRAM and the
|
|
* shared memory area so we'll read the value from
|
|
* shared memory for speed.
|
|
*/
|
|
|
|
mac_hi = bce_shmem_rd(sc, BCE_PORT_HW_CFG_MAC_UPPER);
|
|
mac_lo = bce_shmem_rd(sc, BCE_PORT_HW_CFG_MAC_LOWER);
|
|
|
|
if ((mac_lo == 0) && (mac_hi == 0)) {
|
|
BCE_PRINTF("%s(%d): Invalid Ethernet address!\n",
|
|
__FILE__, __LINE__);
|
|
} else {
|
|
sc->eaddr[0] = (u_char)(mac_hi >> 8);
|
|
sc->eaddr[1] = (u_char)(mac_hi >> 0);
|
|
sc->eaddr[2] = (u_char)(mac_lo >> 24);
|
|
sc->eaddr[3] = (u_char)(mac_lo >> 16);
|
|
sc->eaddr[4] = (u_char)(mac_lo >> 8);
|
|
sc->eaddr[5] = (u_char)(mac_lo >> 0);
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_MISC, "Permanent Ethernet "
|
|
"address = %6D\n", sc->eaddr, ":");
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Program the MAC address. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_set_mac_addr(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
u8 *mac_addr = sc->eaddr;
|
|
|
|
/* ToDo: Add support for setting multiple MAC addresses. */
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
DBPRINT(sc, BCE_INFO_MISC, "Setting Ethernet address = "
|
|
"%6D\n", sc->eaddr, ":");
|
|
|
|
val = (mac_addr[0] << 8) | mac_addr[1];
|
|
|
|
REG_WR(sc, BCE_EMAC_MAC_MATCH0, val);
|
|
|
|
val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
|
|
(mac_addr[4] << 8) | mac_addr[5];
|
|
|
|
REG_WR(sc, BCE_EMAC_MAC_MATCH1, val);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Stop the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_stop(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
callout_stop(&sc->bce_tick_callout);
|
|
|
|
/* Disable the transmit/receive blocks. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS, BCE_MISC_ENABLE_CLR_DEFAULT);
|
|
REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS);
|
|
DELAY(20);
|
|
|
|
bce_disable_intr(sc);
|
|
|
|
/* Free RX buffers. */
|
|
if (bce_hdr_split == TRUE) {
|
|
bce_free_pg_chain(sc);
|
|
}
|
|
bce_free_rx_chain(sc);
|
|
|
|
/* Free TX buffers. */
|
|
bce_free_tx_chain(sc);
|
|
|
|
sc->watchdog_timer = 0;
|
|
|
|
sc->bce_link_up = FALSE;
|
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
static int
|
|
bce_reset(struct bce_softc *sc, u32 reset_code)
|
|
{
|
|
u32 val;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_RESET, "%s(): reset_code = 0x%08X\n",
|
|
__FUNCTION__, reset_code);
|
|
|
|
/* Wait for pending PCI transactions to complete. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS,
|
|
BCE_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
|
|
BCE_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
|
|
BCE_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
|
|
BCE_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
|
|
val = REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS);
|
|
DELAY(5);
|
|
|
|
/* Disable DMA */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
val = REG_RD(sc, BCE_MISC_NEW_CORE_CTL);
|
|
val &= ~BCE_MISC_NEW_CORE_CTL_DMA_ENABLE;
|
|
REG_WR(sc, BCE_MISC_NEW_CORE_CTL, val);
|
|
}
|
|
|
|
/* Assume bootcode is running. */
|
|
sc->bce_fw_timed_out = FALSE;
|
|
sc->bce_drv_cardiac_arrest = FALSE;
|
|
|
|
/* Give the firmware a chance to prepare for the reset. */
|
|
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT0 | reset_code);
|
|
if (rc)
|
|
goto bce_reset_exit;
|
|
|
|
/* Set a firmware reminder that this is a soft reset. */
|
|
bce_shmem_wr(sc, BCE_DRV_RESET_SIGNATURE, BCE_DRV_RESET_SIGNATURE_MAGIC);
|
|
|
|
/* Dummy read to force the chip to complete all current transactions. */
|
|
val = REG_RD(sc, BCE_MISC_ID);
|
|
|
|
/* Chip reset. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
REG_WR(sc, BCE_MISC_COMMAND, BCE_MISC_COMMAND_SW_RESET);
|
|
REG_RD(sc, BCE_MISC_COMMAND);
|
|
DELAY(5);
|
|
|
|
val = BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
|
|
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
|
|
|
|
pci_write_config(sc->bce_dev, BCE_PCICFG_MISC_CONFIG, val, 4);
|
|
} else {
|
|
val = BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
|
|
BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
|
|
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
|
|
REG_WR(sc, BCE_PCICFG_MISC_CONFIG, val);
|
|
|
|
/* Allow up to 30us for reset to complete. */
|
|
for (i = 0; i < 10; i++) {
|
|
val = REG_RD(sc, BCE_PCICFG_MISC_CONFIG);
|
|
if ((val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
|
|
BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) {
|
|
break;
|
|
}
|
|
DELAY(10);
|
|
}
|
|
|
|
/* Check that reset completed successfully. */
|
|
if (val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
|
|
BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
|
|
BCE_PRINTF("%s(%d): Reset failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = EBUSY;
|
|
goto bce_reset_exit;
|
|
}
|
|
}
|
|
|
|
/* Make sure byte swapping is properly configured. */
|
|
val = REG_RD(sc, BCE_PCI_SWAP_DIAG0);
|
|
if (val != 0x01020304) {
|
|
BCE_PRINTF("%s(%d): Byte swap is incorrect!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENODEV;
|
|
goto bce_reset_exit;
|
|
}
|
|
|
|
/* Just completed a reset, assume that firmware is running again. */
|
|
sc->bce_fw_timed_out = FALSE;
|
|
sc->bce_drv_cardiac_arrest = FALSE;
|
|
|
|
/* Wait for the firmware to finish its initialization. */
|
|
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT1 | reset_code);
|
|
if (rc)
|
|
BCE_PRINTF("%s(%d): Firmware did not complete "
|
|
"initialization!\n", __FILE__, __LINE__);
|
|
/* Get firmware capabilities. */
|
|
bce_fw_cap_init(sc);
|
|
|
|
bce_reset_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
static int
|
|
bce_chipinit(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
bce_disable_intr(sc);
|
|
|
|
/*
|
|
* Initialize DMA byte/word swapping, configure the number of DMA
|
|
* channels and PCI clock compensation delay.
|
|
*/
|
|
val = BCE_DMA_CONFIG_DATA_BYTE_SWAP |
|
|
BCE_DMA_CONFIG_DATA_WORD_SWAP |
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
BCE_DMA_CONFIG_CNTL_BYTE_SWAP |
|
|
#endif
|
|
BCE_DMA_CONFIG_CNTL_WORD_SWAP |
|
|
DMA_READ_CHANS << 12 |
|
|
DMA_WRITE_CHANS << 16;
|
|
|
|
val |= (0x2 << 20) | BCE_DMA_CONFIG_CNTL_PCI_COMP_DLY;
|
|
|
|
if ((sc->bce_flags & BCE_PCIX_FLAG) && (sc->bus_speed_mhz == 133))
|
|
val |= BCE_DMA_CONFIG_PCI_FAST_CLK_CMP;
|
|
|
|
/*
|
|
* This setting resolves a problem observed on certain Intel PCI
|
|
* chipsets that cannot handle multiple outstanding DMA operations.
|
|
* See errata E9_5706A1_65.
|
|
*/
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) &&
|
|
(BCE_CHIP_ID(sc) != BCE_CHIP_ID_5706_A0) &&
|
|
!(sc->bce_flags & BCE_PCIX_FLAG))
|
|
val |= BCE_DMA_CONFIG_CNTL_PING_PONG_DMA;
|
|
|
|
REG_WR(sc, BCE_DMA_CONFIG, val);
|
|
|
|
/* Enable the RX_V2P and Context state machines before access. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS,
|
|
BCE_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE |
|
|
BCE_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE |
|
|
BCE_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE);
|
|
|
|
/* Initialize context mapping and zero out the quick contexts. */
|
|
if ((rc = bce_init_ctx(sc)) != 0)
|
|
goto bce_chipinit_exit;
|
|
|
|
/* Initialize the on-boards CPUs */
|
|
bce_init_cpus(sc);
|
|
|
|
/* Enable management frames (NC-SI) to flow to the MCP. */
|
|
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG) {
|
|
val = REG_RD(sc, BCE_RPM_MGMT_PKT_CTRL) | BCE_RPM_MGMT_PKT_CTRL_MGMT_EN;
|
|
REG_WR(sc, BCE_RPM_MGMT_PKT_CTRL, val);
|
|
}
|
|
|
|
/* Prepare NVRAM for access. */
|
|
if ((rc = bce_init_nvram(sc)) != 0)
|
|
goto bce_chipinit_exit;
|
|
|
|
/* Set the kernel bypass block size */
|
|
val = REG_RD(sc, BCE_MQ_CONFIG);
|
|
val &= ~BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE;
|
|
val |= BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
|
|
|
|
/* Enable bins used on the 5709. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
val |= BCE_MQ_CONFIG_BIN_MQ_MODE;
|
|
if (BCE_CHIP_ID(sc) == BCE_CHIP_ID_5709_A1)
|
|
val |= BCE_MQ_CONFIG_HALT_DIS;
|
|
}
|
|
|
|
REG_WR(sc, BCE_MQ_CONFIG, val);
|
|
|
|
val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE);
|
|
REG_WR(sc, BCE_MQ_KNL_BYP_WIND_START, val);
|
|
REG_WR(sc, BCE_MQ_KNL_WIND_END, val);
|
|
|
|
/* Set the page size and clear the RV2P processor stall bits. */
|
|
val = (BCM_PAGE_BITS - 8) << 24;
|
|
REG_WR(sc, BCE_RV2P_CONFIG, val);
|
|
|
|
/* Configure page size. */
|
|
val = REG_RD(sc, BCE_TBDR_CONFIG);
|
|
val &= ~BCE_TBDR_CONFIG_PAGE_SIZE;
|
|
val |= (BCM_PAGE_BITS - 8) << 24 | 0x40;
|
|
REG_WR(sc, BCE_TBDR_CONFIG, val);
|
|
|
|
/* Set the perfect match control register to default. */
|
|
REG_WR_IND(sc, BCE_RXP_PM_CTRL, 0);
|
|
|
|
bce_chipinit_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the controller in preparation to send/receive traffic. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_blockinit(struct bce_softc *sc)
|
|
{
|
|
u32 reg, val;
|
|
int rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Load the hardware default MAC address. */
|
|
bce_set_mac_addr(sc);
|
|
|
|
/* Set the Ethernet backoff seed value */
|
|
val = sc->eaddr[0] + (sc->eaddr[1] << 8) +
|
|
(sc->eaddr[2] << 16) + (sc->eaddr[3] ) +
|
|
(sc->eaddr[4] << 8) + (sc->eaddr[5] << 16);
|
|
REG_WR(sc, BCE_EMAC_BACKOFF_SEED, val);
|
|
|
|
sc->last_status_idx = 0;
|
|
sc->rx_mode = BCE_EMAC_RX_MODE_SORT_MODE;
|
|
|
|
/* Set up link change interrupt generation. */
|
|
REG_WR(sc, BCE_EMAC_ATTENTION_ENA, BCE_EMAC_ATTENTION_ENA_LINK);
|
|
|
|
/* Program the physical address of the status block. */
|
|
REG_WR(sc, BCE_HC_STATUS_ADDR_L,
|
|
BCE_ADDR_LO(sc->status_block_paddr));
|
|
REG_WR(sc, BCE_HC_STATUS_ADDR_H,
|
|
BCE_ADDR_HI(sc->status_block_paddr));
|
|
|
|
/* Program the physical address of the statistics block. */
|
|
REG_WR(sc, BCE_HC_STATISTICS_ADDR_L,
|
|
BCE_ADDR_LO(sc->stats_block_paddr));
|
|
REG_WR(sc, BCE_HC_STATISTICS_ADDR_H,
|
|
BCE_ADDR_HI(sc->stats_block_paddr));
|
|
|
|
/* Program various host coalescing parameters. */
|
|
REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP,
|
|
(sc->bce_tx_quick_cons_trip_int << 16) | sc->bce_tx_quick_cons_trip);
|
|
REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP,
|
|
(sc->bce_rx_quick_cons_trip_int << 16) | sc->bce_rx_quick_cons_trip);
|
|
REG_WR(sc, BCE_HC_COMP_PROD_TRIP,
|
|
(sc->bce_comp_prod_trip_int << 16) | sc->bce_comp_prod_trip);
|
|
REG_WR(sc, BCE_HC_TX_TICKS,
|
|
(sc->bce_tx_ticks_int << 16) | sc->bce_tx_ticks);
|
|
REG_WR(sc, BCE_HC_RX_TICKS,
|
|
(sc->bce_rx_ticks_int << 16) | sc->bce_rx_ticks);
|
|
REG_WR(sc, BCE_HC_COM_TICKS,
|
|
(sc->bce_com_ticks_int << 16) | sc->bce_com_ticks);
|
|
REG_WR(sc, BCE_HC_CMD_TICKS,
|
|
(sc->bce_cmd_ticks_int << 16) | sc->bce_cmd_ticks);
|
|
REG_WR(sc, BCE_HC_STATS_TICKS,
|
|
(sc->bce_stats_ticks & 0xffff00));
|
|
REG_WR(sc, BCE_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */
|
|
|
|
/* Configure the Host Coalescing block. */
|
|
val = BCE_HC_CONFIG_RX_TMR_MODE | BCE_HC_CONFIG_TX_TMR_MODE |
|
|
BCE_HC_CONFIG_COLLECT_STATS;
|
|
|
|
#if 0
|
|
/* ToDo: Add MSI-X support. */
|
|
if (sc->bce_flags & BCE_USING_MSIX_FLAG) {
|
|
u32 base = ((BCE_TX_VEC - 1) * BCE_HC_SB_CONFIG_SIZE) +
|
|
BCE_HC_SB_CONFIG_1;
|
|
|
|
REG_WR(sc, BCE_HC_MSIX_BIT_VECTOR, BCE_HC_MSIX_BIT_VECTOR_VAL);
|
|
|
|
REG_WR(sc, base, BCE_HC_SB_CONFIG_1_TX_TMR_MODE |
|
|
BCE_HC_SB_CONFIG_1_ONE_SHOT);
|
|
|
|
REG_WR(sc, base + BCE_HC_TX_QUICK_CONS_TRIP_OFF,
|
|
(sc->tx_quick_cons_trip_int << 16) |
|
|
sc->tx_quick_cons_trip);
|
|
|
|
REG_WR(sc, base + BCE_HC_TX_TICKS_OFF,
|
|
(sc->tx_ticks_int << 16) | sc->tx_ticks);
|
|
|
|
val |= BCE_HC_CONFIG_SB_ADDR_INC_128B;
|
|
}
|
|
|
|
/*
|
|
* Tell the HC block to automatically set the
|
|
* INT_MASK bit after an MSI/MSI-X interrupt
|
|
* is generated so the driver doesn't have to.
|
|
*/
|
|
if (sc->bce_flags & BCE_ONE_SHOT_MSI_FLAG)
|
|
val |= BCE_HC_CONFIG_ONE_SHOT;
|
|
|
|
/* Set the MSI-X status blocks to 128 byte boundaries. */
|
|
if (sc->bce_flags & BCE_USING_MSIX_FLAG)
|
|
val |= BCE_HC_CONFIG_SB_ADDR_INC_128B;
|
|
#endif
|
|
|
|
REG_WR(sc, BCE_HC_CONFIG, val);
|
|
|
|
/* Clear the internal statistics counters. */
|
|
REG_WR(sc, BCE_HC_COMMAND, BCE_HC_COMMAND_CLR_STAT_NOW);
|
|
|
|
/* Verify that bootcode is running. */
|
|
reg = bce_shmem_rd(sc, BCE_DEV_INFO_SIGNATURE);
|
|
|
|
DBRUNIF(DB_RANDOMTRUE(bootcode_running_failure_sim_control),
|
|
BCE_PRINTF("%s(%d): Simulating bootcode failure.\n",
|
|
__FILE__, __LINE__);
|
|
reg = 0);
|
|
|
|
if ((reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
|
|
BCE_DEV_INFO_SIGNATURE_MAGIC) {
|
|
BCE_PRINTF("%s(%d): Bootcode not running! Found: 0x%08X, "
|
|
"Expected: 08%08X\n", __FILE__, __LINE__,
|
|
(reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK),
|
|
BCE_DEV_INFO_SIGNATURE_MAGIC);
|
|
rc = ENODEV;
|
|
goto bce_blockinit_exit;
|
|
}
|
|
|
|
/* Enable DMA */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
val = REG_RD(sc, BCE_MISC_NEW_CORE_CTL);
|
|
val |= BCE_MISC_NEW_CORE_CTL_DMA_ENABLE;
|
|
REG_WR(sc, BCE_MISC_NEW_CORE_CTL, val);
|
|
}
|
|
|
|
/* Allow bootcode to apply additional fixes before enabling MAC. */
|
|
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT2 |
|
|
BCE_DRV_MSG_CODE_RESET);
|
|
|
|
/* Enable link state change interrupt generation. */
|
|
REG_WR(sc, BCE_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
|
|
|
|
/* Enable the RXP. */
|
|
bce_start_rxp_cpu(sc);
|
|
|
|
/* Disable management frames (NC-SI) from flowing to the MCP. */
|
|
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG) {
|
|
val = REG_RD(sc, BCE_RPM_MGMT_PKT_CTRL) &
|
|
~BCE_RPM_MGMT_PKT_CTRL_MGMT_EN;
|
|
REG_WR(sc, BCE_RPM_MGMT_PKT_CTRL, val);
|
|
}
|
|
|
|
/* Enable all remaining blocks in the MAC. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709)
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS,
|
|
BCE_MISC_ENABLE_DEFAULT_XI);
|
|
else
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS,
|
|
BCE_MISC_ENABLE_DEFAULT);
|
|
|
|
REG_RD(sc, BCE_MISC_ENABLE_SET_BITS);
|
|
DELAY(20);
|
|
|
|
/* Save the current host coalescing block settings. */
|
|
sc->hc_command = REG_RD(sc, BCE_HC_COMMAND);
|
|
|
|
bce_blockinit_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Encapsulate an mbuf into the rx_bd chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_get_rx_buf(struct bce_softc *sc, struct mbuf *m, u16 *prod,
|
|
u16 *chain_prod, u32 *prod_bseq)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t segs[BCE_MAX_SEGMENTS];
|
|
struct mbuf *m_new = NULL;
|
|
struct rx_bd *rxbd;
|
|
int nsegs, error, rc = 0;
|
|
#ifdef BCE_DEBUG
|
|
u16 debug_chain_prod = *chain_prod;
|
|
#endif
|
|
|
|
DBENTER(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
/* Make sure the inputs are valid. */
|
|
DBRUNIF((*chain_prod > MAX_RX_BD_ALLOC),
|
|
BCE_PRINTF("%s(%d): RX producer out of range: "
|
|
"0x%04X > 0x%04X\n", __FILE__, __LINE__,
|
|
*chain_prod, (u16) MAX_RX_BD_ALLOC));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(enter): prod = 0x%04X, "
|
|
"chain_prod = 0x%04X, prod_bseq = 0x%08X\n", __FUNCTION__,
|
|
*prod, *chain_prod, *prod_bseq);
|
|
|
|
/* Update some debug statistic counters */
|
|
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
|
|
sc->rx_low_watermark = sc->free_rx_bd);
|
|
DBRUNIF((sc->free_rx_bd == sc->max_rx_bd),
|
|
sc->rx_empty_count++);
|
|
|
|
/* Check whether this is a new mbuf allocation. */
|
|
if (m == NULL) {
|
|
|
|
/* Simulate an mbuf allocation failure. */
|
|
DBRUNIF(DB_RANDOMTRUE(mbuf_alloc_failed_sim_control),
|
|
sc->mbuf_alloc_failed_count++;
|
|
sc->mbuf_alloc_failed_sim_count++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_rx_buf_exit);
|
|
|
|
/* This is a new mbuf allocation. */
|
|
if (bce_hdr_split == TRUE)
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
else
|
|
m_new = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR,
|
|
sc->rx_bd_mbuf_alloc_size);
|
|
|
|
if (m_new == NULL) {
|
|
sc->mbuf_alloc_failed_count++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_rx_buf_exit;
|
|
}
|
|
|
|
DBRUN(sc->debug_rx_mbuf_alloc++);
|
|
} else {
|
|
/* Reuse an existing mbuf. */
|
|
m_new = m;
|
|
}
|
|
|
|
/* Make sure we have a valid packet header. */
|
|
M_ASSERTPKTHDR(m_new);
|
|
|
|
/* Initialize the mbuf size and pad if necessary for alignment. */
|
|
m_new->m_pkthdr.len = m_new->m_len = sc->rx_bd_mbuf_alloc_size;
|
|
m_adj(m_new, sc->rx_bd_mbuf_align_pad);
|
|
|
|
/* ToDo: Consider calling m_fragment() to test error handling. */
|
|
|
|
/* Map the mbuf cluster into device memory. */
|
|
map = sc->rx_mbuf_map[*chain_prod];
|
|
error = bus_dmamap_load_mbuf_sg(sc->rx_mbuf_tag, map, m_new,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
/* Handle any mapping errors. */
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Error mapping mbuf into RX "
|
|
"chain (%d)!\n", __FILE__, __LINE__, error);
|
|
|
|
sc->dma_map_addr_rx_failed_count++;
|
|
m_freem(m_new);
|
|
|
|
DBRUN(sc->debug_rx_mbuf_alloc--);
|
|
|
|
rc = ENOBUFS;
|
|
goto bce_get_rx_buf_exit;
|
|
}
|
|
|
|
/* All mbufs must map to a single segment. */
|
|
KASSERT(nsegs == 1, ("%s(): Too many segments returned (%d)!",
|
|
__FUNCTION__, nsegs));
|
|
|
|
/* Setup the rx_bd for the segment. */
|
|
rxbd = &sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)];
|
|
|
|
rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[0].ds_addr));
|
|
rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[0].ds_addr));
|
|
rxbd->rx_bd_len = htole32(segs[0].ds_len);
|
|
rxbd->rx_bd_flags = htole32(RX_BD_FLAGS_START | RX_BD_FLAGS_END);
|
|
*prod_bseq += segs[0].ds_len;
|
|
|
|
/* Save the mbuf and update our counter. */
|
|
sc->rx_mbuf_ptr[*chain_prod] = m_new;
|
|
sc->free_rx_bd -= nsegs;
|
|
|
|
DBRUNMSG(BCE_INSANE_RECV,
|
|
bce_dump_rx_mbuf_chain(sc, debug_chain_prod, nsegs));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(exit): prod = 0x%04X, "
|
|
"chain_prod = 0x%04X, prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, *prod, *chain_prod, *prod_bseq);
|
|
|
|
bce_get_rx_buf_exit:
|
|
DBEXIT(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Encapsulate an mbuf cluster into the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_get_pg_buf(struct bce_softc *sc, struct mbuf *m, u16 *prod,
|
|
u16 *prod_idx)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_addr_t busaddr;
|
|
struct mbuf *m_new = NULL;
|
|
struct rx_bd *pgbd;
|
|
int error, rc = 0;
|
|
#ifdef BCE_DEBUG
|
|
u16 debug_prod_idx = *prod_idx;
|
|
#endif
|
|
|
|
DBENTER(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
/* Make sure the inputs are valid. */
|
|
DBRUNIF((*prod_idx > MAX_PG_BD_ALLOC),
|
|
BCE_PRINTF("%s(%d): page producer out of range: "
|
|
"0x%04X > 0x%04X\n", __FILE__, __LINE__,
|
|
*prod_idx, (u16) MAX_PG_BD_ALLOC));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(enter): prod = 0x%04X, "
|
|
"chain_prod = 0x%04X\n", __FUNCTION__, *prod, *prod_idx);
|
|
|
|
/* Update counters if we've hit a new low or run out of pages. */
|
|
DBRUNIF((sc->free_pg_bd < sc->pg_low_watermark),
|
|
sc->pg_low_watermark = sc->free_pg_bd);
|
|
DBRUNIF((sc->free_pg_bd == sc->max_pg_bd), sc->pg_empty_count++);
|
|
|
|
/* Check whether this is a new mbuf allocation. */
|
|
if (m == NULL) {
|
|
|
|
/* Simulate an mbuf allocation failure. */
|
|
DBRUNIF(DB_RANDOMTRUE(mbuf_alloc_failed_sim_control),
|
|
sc->mbuf_alloc_failed_count++;
|
|
sc->mbuf_alloc_failed_sim_count++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_pg_buf_exit);
|
|
|
|
/* This is a new mbuf allocation. */
|
|
m_new = m_getcl(M_DONTWAIT, MT_DATA, 0);
|
|
if (m_new == NULL) {
|
|
sc->mbuf_alloc_failed_count++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_pg_buf_exit;
|
|
}
|
|
|
|
DBRUN(sc->debug_pg_mbuf_alloc++);
|
|
} else {
|
|
/* Reuse an existing mbuf. */
|
|
m_new = m;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
m_new->m_len = sc->pg_bd_mbuf_alloc_size;
|
|
|
|
/* ToDo: Consider calling m_fragment() to test error handling. */
|
|
|
|
/* Map the mbuf cluster into device memory. */
|
|
map = sc->pg_mbuf_map[*prod_idx];
|
|
error = bus_dmamap_load(sc->pg_mbuf_tag, map, mtod(m_new, void *),
|
|
sc->pg_bd_mbuf_alloc_size, bce_dma_map_addr,
|
|
&busaddr, BUS_DMA_NOWAIT);
|
|
|
|
/* Handle any mapping errors. */
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Error mapping mbuf into page chain!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
m_freem(m_new);
|
|
DBRUN(sc->debug_pg_mbuf_alloc--);
|
|
|
|
rc = ENOBUFS;
|
|
goto bce_get_pg_buf_exit;
|
|
}
|
|
|
|
/* ToDo: Do we need bus_dmamap_sync(,,BUS_DMASYNC_PREREAD) here? */
|
|
|
|
/*
|
|
* The page chain uses the same rx_bd data structure
|
|
* as the receive chain but doesn't require a byte sequence (bseq).
|
|
*/
|
|
pgbd = &sc->pg_bd_chain[PG_PAGE(*prod_idx)][PG_IDX(*prod_idx)];
|
|
|
|
pgbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(busaddr));
|
|
pgbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(busaddr));
|
|
pgbd->rx_bd_len = htole32(sc->pg_bd_mbuf_alloc_size);
|
|
pgbd->rx_bd_flags = htole32(RX_BD_FLAGS_START | RX_BD_FLAGS_END);
|
|
|
|
/* Save the mbuf and update our counter. */
|
|
sc->pg_mbuf_ptr[*prod_idx] = m_new;
|
|
sc->free_pg_bd--;
|
|
|
|
DBRUNMSG(BCE_INSANE_RECV,
|
|
bce_dump_pg_mbuf_chain(sc, debug_prod_idx, 1));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(exit): prod = 0x%04X, "
|
|
"prod_idx = 0x%04X\n", __FUNCTION__, *prod, *prod_idx);
|
|
|
|
bce_get_pg_buf_exit:
|
|
DBEXIT(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the TX context memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_tx_context(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
|
|
/* Initialize the context ID for an L2 TX chain. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
/* Set the CID type to support an L2 connection. */
|
|
val = BCE_L2CTX_TX_TYPE_TYPE_L2_XI |
|
|
BCE_L2CTX_TX_TYPE_SIZE_L2_XI;
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TYPE_XI, val);
|
|
val = BCE_L2CTX_TX_CMD_TYPE_TYPE_L2_XI | (8 << 16);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID),
|
|
BCE_L2CTX_TX_CMD_TYPE_XI, val);
|
|
|
|
/* Point the hardware to the first page in the chain. */
|
|
val = BCE_ADDR_HI(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_HI_XI, val);
|
|
val = BCE_ADDR_LO(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_LO_XI, val);
|
|
} else {
|
|
/* Set the CID type to support an L2 connection. */
|
|
val = BCE_L2CTX_TX_TYPE_TYPE_L2 | BCE_L2CTX_TX_TYPE_SIZE_L2;
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TYPE, val);
|
|
val = BCE_L2CTX_TX_CMD_TYPE_TYPE_L2 | (8 << 16);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_CMD_TYPE, val);
|
|
|
|
/* Point the hardware to the first page in the chain. */
|
|
val = BCE_ADDR_HI(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_HI, val);
|
|
val = BCE_ADDR_LO(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_LO, val);
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allocate memory and initialize the TX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_tx_chain(struct bce_softc *sc)
|
|
{
|
|
struct tx_bd *txbd;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_LOAD);
|
|
|
|
/* Set the initial TX producer/consumer indices. */
|
|
sc->tx_prod = 0;
|
|
sc->tx_cons = 0;
|
|
sc->tx_prod_bseq = 0;
|
|
sc->used_tx_bd = 0;
|
|
sc->max_tx_bd = USABLE_TX_BD_ALLOC;
|
|
DBRUN(sc->tx_hi_watermark = 0);
|
|
DBRUN(sc->tx_full_count = 0);
|
|
|
|
/*
|
|
* The NetXtreme II supports a linked-list structre called
|
|
* a Buffer Descriptor Chain (or BD chain). A BD chain
|
|
* consists of a series of 1 or more chain pages, each of which
|
|
* consists of a fixed number of BD entries.
|
|
* The last BD entry on each page is a pointer to the next page
|
|
* in the chain, and the last pointer in the BD chain
|
|
* points back to the beginning of the chain.
|
|
*/
|
|
|
|
/* Set the TX next pointer chain entries. */
|
|
for (i = 0; i < sc->tx_pages; i++) {
|
|
int j;
|
|
|
|
txbd = &sc->tx_bd_chain[i][USABLE_TX_BD_PER_PAGE];
|
|
|
|
/* Check if we've reached the last page. */
|
|
if (i == (sc->tx_pages - 1))
|
|
j = 0;
|
|
else
|
|
j = i + 1;
|
|
|
|
txbd->tx_bd_haddr_hi =
|
|
htole32(BCE_ADDR_HI(sc->tx_bd_chain_paddr[j]));
|
|
txbd->tx_bd_haddr_lo =
|
|
htole32(BCE_ADDR_LO(sc->tx_bd_chain_paddr[j]));
|
|
}
|
|
|
|
bce_init_tx_context(sc);
|
|
|
|
DBRUNMSG(BCE_INSANE_SEND, bce_dump_tx_chain(sc, 0, TOTAL_TX_BD_ALLOC));
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_LOAD);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free memory and clear the TX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_free_tx_chain(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_UNLOAD);
|
|
|
|
/* Unmap, unload, and free any mbufs still in the TX mbuf chain. */
|
|
for (i = 0; i < MAX_TX_BD_AVAIL; i++) {
|
|
if (sc->tx_mbuf_ptr[i] != NULL) {
|
|
if (sc->tx_mbuf_map[i] != NULL)
|
|
bus_dmamap_sync(sc->tx_mbuf_tag,
|
|
sc->tx_mbuf_map[i],
|
|
BUS_DMASYNC_POSTWRITE);
|
|
m_freem(sc->tx_mbuf_ptr[i]);
|
|
sc->tx_mbuf_ptr[i] = NULL;
|
|
DBRUN(sc->debug_tx_mbuf_alloc--);
|
|
}
|
|
}
|
|
|
|
/* Clear each TX chain page. */
|
|
for (i = 0; i < sc->tx_pages; i++)
|
|
bzero((char *)sc->tx_bd_chain[i], BCE_TX_CHAIN_PAGE_SZ);
|
|
|
|
sc->used_tx_bd = 0;
|
|
|
|
/* Check if we lost any mbufs in the process. */
|
|
DBRUNIF((sc->debug_tx_mbuf_alloc),
|
|
BCE_PRINTF("%s(%d): Memory leak! Lost %d mbufs "
|
|
"from tx chain!\n", __FILE__, __LINE__,
|
|
sc->debug_tx_mbuf_alloc));
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_UNLOAD);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the RX context memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_rx_context(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_CTX);
|
|
|
|
/* Init the type, size, and BD cache levels for the RX context. */
|
|
val = BCE_L2CTX_RX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE |
|
|
BCE_L2CTX_RX_CTX_TYPE_SIZE_L2 |
|
|
(0x02 << BCE_L2CTX_RX_BD_PRE_READ_SHIFT);
|
|
|
|
/*
|
|
* Set the level for generating pause frames
|
|
* when the number of available rx_bd's gets
|
|
* too low (the low watermark) and the level
|
|
* when pause frames can be stopped (the high
|
|
* watermark).
|
|
*/
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
u32 lo_water, hi_water;
|
|
|
|
if (sc->bce_flags & BCE_USING_TX_FLOW_CONTROL) {
|
|
lo_water = BCE_L2CTX_RX_LO_WATER_MARK_DEFAULT;
|
|
} else {
|
|
lo_water = 0;
|
|
}
|
|
|
|
if (lo_water >= USABLE_RX_BD_ALLOC) {
|
|
lo_water = 0;
|
|
}
|
|
|
|
hi_water = USABLE_RX_BD_ALLOC / 4;
|
|
|
|
if (hi_water <= lo_water) {
|
|
lo_water = 0;
|
|
}
|
|
|
|
lo_water /= BCE_L2CTX_RX_LO_WATER_MARK_SCALE;
|
|
hi_water /= BCE_L2CTX_RX_HI_WATER_MARK_SCALE;
|
|
|
|
if (hi_water > 0xf)
|
|
hi_water = 0xf;
|
|
else if (hi_water == 0)
|
|
lo_water = 0;
|
|
|
|
val |= (lo_water << BCE_L2CTX_RX_LO_WATER_MARK_SHIFT) |
|
|
(hi_water << BCE_L2CTX_RX_HI_WATER_MARK_SHIFT);
|
|
}
|
|
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_CTX_TYPE, val);
|
|
|
|
/* Setup the MQ BIN mapping for l2_ctx_host_bseq. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
val = REG_RD(sc, BCE_MQ_MAP_L2_5);
|
|
REG_WR(sc, BCE_MQ_MAP_L2_5, val | BCE_MQ_MAP_L2_5_ARM);
|
|
}
|
|
|
|
/* Point the hardware to the first page in the chain. */
|
|
val = BCE_ADDR_HI(sc->rx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_BDHADDR_HI, val);
|
|
val = BCE_ADDR_LO(sc->rx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_BDHADDR_LO, val);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allocate memory and initialize the RX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_rx_chain(struct bce_softc *sc)
|
|
{
|
|
struct rx_bd *rxbd;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Initialize the RX producer and consumer indices. */
|
|
sc->rx_prod = 0;
|
|
sc->rx_cons = 0;
|
|
sc->rx_prod_bseq = 0;
|
|
sc->free_rx_bd = USABLE_RX_BD_ALLOC;
|
|
sc->max_rx_bd = USABLE_RX_BD_ALLOC;
|
|
|
|
/* Initialize the RX next pointer chain entries. */
|
|
for (i = 0; i < sc->rx_pages; i++) {
|
|
int j;
|
|
|
|
rxbd = &sc->rx_bd_chain[i][USABLE_RX_BD_PER_PAGE];
|
|
|
|
/* Check if we've reached the last page. */
|
|
if (i == (sc->rx_pages - 1))
|
|
j = 0;
|
|
else
|
|
j = i + 1;
|
|
|
|
/* Setup the chain page pointers. */
|
|
rxbd->rx_bd_haddr_hi =
|
|
htole32(BCE_ADDR_HI(sc->rx_bd_chain_paddr[j]));
|
|
rxbd->rx_bd_haddr_lo =
|
|
htole32(BCE_ADDR_LO(sc->rx_bd_chain_paddr[j]));
|
|
}
|
|
|
|
/* Fill up the RX chain. */
|
|
bce_fill_rx_chain(sc);
|
|
|
|
DBRUN(sc->rx_low_watermark = USABLE_RX_BD_ALLOC);
|
|
DBRUN(sc->rx_empty_count = 0);
|
|
for (i = 0; i < sc->rx_pages; i++) {
|
|
bus_dmamap_sync(sc->rx_bd_chain_tag, sc->rx_bd_chain_map[i],
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
bce_init_rx_context(sc);
|
|
|
|
DBRUNMSG(BCE_EXTREME_RECV,
|
|
bce_dump_rx_bd_chain(sc, 0, TOTAL_RX_BD_ALLOC));
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* ToDo: Are there possible failure modes here? */
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Add mbufs to the RX chain until its full or an mbuf allocation error */
|
|
/* occurs. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_fill_rx_chain(struct bce_softc *sc)
|
|
{
|
|
u16 prod, prod_idx;
|
|
u32 prod_bseq;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Get the RX chain producer indices. */
|
|
prod = sc->rx_prod;
|
|
prod_bseq = sc->rx_prod_bseq;
|
|
|
|
/* Keep filling the RX chain until it's full. */
|
|
while (sc->free_rx_bd > 0) {
|
|
prod_idx = RX_CHAIN_IDX(prod);
|
|
if (bce_get_rx_buf(sc, NULL, &prod, &prod_idx, &prod_bseq)) {
|
|
/* Bail out if we can't add an mbuf to the chain. */
|
|
break;
|
|
}
|
|
prod = NEXT_RX_BD(prod);
|
|
}
|
|
|
|
/* Save the RX chain producer indices. */
|
|
sc->rx_prod = prod;
|
|
sc->rx_prod_bseq = prod_bseq;
|
|
|
|
/* We should never end up pointing to a next page pointer. */
|
|
DBRUNIF(((prod & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE),
|
|
BCE_PRINTF("%s(): Invalid rx_prod value: 0x%04X\n",
|
|
__FUNCTION__, sc->rx_prod));
|
|
|
|
/* Write the mailbox and tell the chip about the waiting rx_bd's. */
|
|
REG_WR16(sc, MB_GET_CID_ADDR(RX_CID) +
|
|
BCE_L2MQ_RX_HOST_BDIDX, sc->rx_prod);
|
|
REG_WR(sc, MB_GET_CID_ADDR(RX_CID) +
|
|
BCE_L2MQ_RX_HOST_BSEQ, sc->rx_prod_bseq);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free memory and clear the RX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_free_rx_chain(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
|
|
/* Free any mbufs still in the RX mbuf chain. */
|
|
for (i = 0; i < MAX_RX_BD_AVAIL; i++) {
|
|
if (sc->rx_mbuf_ptr[i] != NULL) {
|
|
if (sc->rx_mbuf_map[i] != NULL)
|
|
bus_dmamap_sync(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[i],
|
|
BUS_DMASYNC_POSTREAD);
|
|
m_freem(sc->rx_mbuf_ptr[i]);
|
|
sc->rx_mbuf_ptr[i] = NULL;
|
|
DBRUN(sc->debug_rx_mbuf_alloc--);
|
|
}
|
|
}
|
|
|
|
/* Clear each RX chain page. */
|
|
for (i = 0; i < sc->rx_pages; i++)
|
|
if (sc->rx_bd_chain[i] != NULL) {
|
|
bzero((char *)sc->rx_bd_chain[i],
|
|
BCE_RX_CHAIN_PAGE_SZ);
|
|
}
|
|
|
|
sc->free_rx_bd = sc->max_rx_bd;
|
|
|
|
/* Check if we lost any mbufs in the process. */
|
|
DBRUNIF((sc->debug_rx_mbuf_alloc),
|
|
BCE_PRINTF("%s(): Memory leak! Lost %d mbufs from rx chain!\n",
|
|
__FUNCTION__, sc->debug_rx_mbuf_alloc));
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allocate memory and initialize the page data structures. */
|
|
/* Assumes that bce_init_rx_chain() has not already been called. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_pg_chain(struct bce_softc *sc)
|
|
{
|
|
struct rx_bd *pgbd;
|
|
int i, rc = 0;
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Initialize the page producer and consumer indices. */
|
|
sc->pg_prod = 0;
|
|
sc->pg_cons = 0;
|
|
sc->free_pg_bd = USABLE_PG_BD_ALLOC;
|
|
sc->max_pg_bd = USABLE_PG_BD_ALLOC;
|
|
DBRUN(sc->pg_low_watermark = sc->max_pg_bd);
|
|
DBRUN(sc->pg_empty_count = 0);
|
|
|
|
/* Initialize the page next pointer chain entries. */
|
|
for (i = 0; i < sc->pg_pages; i++) {
|
|
int j;
|
|
|
|
pgbd = &sc->pg_bd_chain[i][USABLE_PG_BD_PER_PAGE];
|
|
|
|
/* Check if we've reached the last page. */
|
|
if (i == (sc->pg_pages - 1))
|
|
j = 0;
|
|
else
|
|
j = i + 1;
|
|
|
|
/* Setup the chain page pointers. */
|
|
pgbd->rx_bd_haddr_hi =
|
|
htole32(BCE_ADDR_HI(sc->pg_bd_chain_paddr[j]));
|
|
pgbd->rx_bd_haddr_lo =
|
|
htole32(BCE_ADDR_LO(sc->pg_bd_chain_paddr[j]));
|
|
}
|
|
|
|
/* Setup the MQ BIN mapping for host_pg_bidx. */
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709)
|
|
REG_WR(sc, BCE_MQ_MAP_L2_3, BCE_MQ_MAP_L2_3_DEFAULT);
|
|
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_PG_BUF_SIZE, 0);
|
|
|
|
/* Configure the rx_bd and page chain mbuf cluster size. */
|
|
val = (sc->rx_bd_mbuf_data_len << 16) | sc->pg_bd_mbuf_alloc_size;
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_PG_BUF_SIZE, val);
|
|
|
|
/* Configure the context reserved for jumbo support. */
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_RBDC_KEY,
|
|
BCE_L2CTX_RX_RBDC_JUMBO_KEY);
|
|
|
|
/* Point the hardware to the first page in the page chain. */
|
|
val = BCE_ADDR_HI(sc->pg_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_PG_BDHADDR_HI, val);
|
|
val = BCE_ADDR_LO(sc->pg_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_PG_BDHADDR_LO, val);
|
|
|
|
/* Fill up the page chain. */
|
|
bce_fill_pg_chain(sc);
|
|
|
|
for (i = 0; i < sc->pg_pages; i++) {
|
|
bus_dmamap_sync(sc->pg_bd_chain_tag, sc->pg_bd_chain_map[i],
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
DBRUNMSG(BCE_EXTREME_RECV,
|
|
bce_dump_pg_chain(sc, 0, TOTAL_PG_BD_ALLOC));
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Add mbufs to the page chain until its full or an mbuf allocation error */
|
|
/* occurs. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_fill_pg_chain(struct bce_softc *sc)
|
|
{
|
|
u16 prod, prod_idx;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Get the page chain prodcuer index. */
|
|
prod = sc->pg_prod;
|
|
|
|
/* Keep filling the page chain until it's full. */
|
|
while (sc->free_pg_bd > 0) {
|
|
prod_idx = PG_CHAIN_IDX(prod);
|
|
if (bce_get_pg_buf(sc, NULL, &prod, &prod_idx)) {
|
|
/* Bail out if we can't add an mbuf to the chain. */
|
|
break;
|
|
}
|
|
prod = NEXT_PG_BD(prod);
|
|
}
|
|
|
|
/* Save the page chain producer index. */
|
|
sc->pg_prod = prod;
|
|
|
|
DBRUNIF(((prod & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE),
|
|
BCE_PRINTF("%s(): Invalid pg_prod value: 0x%04X\n",
|
|
__FUNCTION__, sc->pg_prod));
|
|
|
|
/*
|
|
* Write the mailbox and tell the chip about
|
|
* the new rx_bd's in the page chain.
|
|
*/
|
|
REG_WR16(sc, MB_GET_CID_ADDR(RX_CID) +
|
|
BCE_L2MQ_RX_HOST_PG_BDIDX, sc->pg_prod);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free memory and clear the RX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_free_pg_chain(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
|
|
/* Free any mbufs still in the mbuf page chain. */
|
|
for (i = 0; i < MAX_PG_BD_AVAIL; i++) {
|
|
if (sc->pg_mbuf_ptr[i] != NULL) {
|
|
if (sc->pg_mbuf_map[i] != NULL)
|
|
bus_dmamap_sync(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[i],
|
|
BUS_DMASYNC_POSTREAD);
|
|
m_freem(sc->pg_mbuf_ptr[i]);
|
|
sc->pg_mbuf_ptr[i] = NULL;
|
|
DBRUN(sc->debug_pg_mbuf_alloc--);
|
|
}
|
|
}
|
|
|
|
/* Clear each page chain pages. */
|
|
for (i = 0; i < sc->pg_pages; i++)
|
|
bzero((char *)sc->pg_bd_chain[i], BCE_PG_CHAIN_PAGE_SZ);
|
|
|
|
sc->free_pg_bd = sc->max_pg_bd;
|
|
|
|
/* Check if we lost any mbufs in the process. */
|
|
DBRUNIF((sc->debug_pg_mbuf_alloc),
|
|
BCE_PRINTF("%s(): Memory leak! Lost %d mbufs from page chain!\n",
|
|
__FUNCTION__, sc->debug_pg_mbuf_alloc));
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
}
|
|
|
|
|
|
static u32
|
|
bce_get_rphy_link(struct bce_softc *sc)
|
|
{
|
|
u32 advertise, link;
|
|
int fdpx;
|
|
|
|
advertise = 0;
|
|
fdpx = 0;
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG) != 0)
|
|
link = bce_shmem_rd(sc, BCE_RPHY_SERDES_LINK);
|
|
else
|
|
link = bce_shmem_rd(sc, BCE_RPHY_COPPER_LINK);
|
|
if (link & BCE_NETLINK_ANEG_ENB)
|
|
advertise |= BCE_NETLINK_ANEG_ENB;
|
|
if (link & BCE_NETLINK_SPEED_10HALF)
|
|
advertise |= BCE_NETLINK_SPEED_10HALF;
|
|
if (link & BCE_NETLINK_SPEED_10FULL) {
|
|
advertise |= BCE_NETLINK_SPEED_10FULL;
|
|
fdpx++;
|
|
}
|
|
if (link & BCE_NETLINK_SPEED_100HALF)
|
|
advertise |= BCE_NETLINK_SPEED_100HALF;
|
|
if (link & BCE_NETLINK_SPEED_100FULL) {
|
|
advertise |= BCE_NETLINK_SPEED_100FULL;
|
|
fdpx++;
|
|
}
|
|
if (link & BCE_NETLINK_SPEED_1000HALF)
|
|
advertise |= BCE_NETLINK_SPEED_1000HALF;
|
|
if (link & BCE_NETLINK_SPEED_1000FULL) {
|
|
advertise |= BCE_NETLINK_SPEED_1000FULL;
|
|
fdpx++;
|
|
}
|
|
if (link & BCE_NETLINK_SPEED_2500HALF)
|
|
advertise |= BCE_NETLINK_SPEED_2500HALF;
|
|
if (link & BCE_NETLINK_SPEED_2500FULL) {
|
|
advertise |= BCE_NETLINK_SPEED_2500FULL;
|
|
fdpx++;
|
|
}
|
|
if (fdpx)
|
|
advertise |= BCE_NETLINK_FC_PAUSE_SYM |
|
|
BCE_NETLINK_FC_PAUSE_ASYM;
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG) == 0)
|
|
advertise |= BCE_NETLINK_PHY_APP_REMOTE |
|
|
BCE_NETLINK_ETH_AT_WIRESPEED;
|
|
|
|
return (advertise);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Set media options. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
int error;
|
|
|
|
DBENTER(BCE_VERBOSE);
|
|
|
|
BCE_LOCK(sc);
|
|
error = bce_ifmedia_upd_locked(ifp);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE);
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Set media options. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_ifmedia_upd_locked(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii;
|
|
struct mii_softc *miisc;
|
|
struct ifmedia *ifm;
|
|
u32 link;
|
|
int error, fdx;
|
|
|
|
DBENTER(BCE_VERBOSE_PHY);
|
|
|
|
error = 0;
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
sc->bce_link_up = FALSE;
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0) {
|
|
ifm = &sc->bce_ifmedia;
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
link = 0;
|
|
fdx = IFM_OPTIONS(ifm->ifm_media) & IFM_FDX;
|
|
switch(IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
/*
|
|
* Check advertised link of remote PHY by reading
|
|
* BCE_RPHY_SERDES_LINK or BCE_RPHY_COPPER_LINK.
|
|
* Always use the same link type of remote PHY.
|
|
*/
|
|
link = bce_get_rphy_link(sc);
|
|
break;
|
|
case IFM_2500_SX:
|
|
if ((sc->bce_phy_flags &
|
|
(BCE_PHY_REMOTE_PORT_FIBER_FLAG |
|
|
BCE_PHY_2_5G_CAPABLE_FLAG)) == 0)
|
|
return (EINVAL);
|
|
/*
|
|
* XXX
|
|
* Have to enable forced 2.5Gbps configuration.
|
|
*/
|
|
if (fdx != 0)
|
|
link |= BCE_NETLINK_SPEED_2500FULL;
|
|
else
|
|
link |= BCE_NETLINK_SPEED_2500HALF;
|
|
break;
|
|
case IFM_1000_SX:
|
|
if ((sc->bce_phy_flags &
|
|
BCE_PHY_REMOTE_PORT_FIBER_FLAG) == 0)
|
|
return (EINVAL);
|
|
/*
|
|
* XXX
|
|
* Have to disable 2.5Gbps configuration.
|
|
*/
|
|
if (fdx != 0)
|
|
link = BCE_NETLINK_SPEED_1000FULL;
|
|
else
|
|
link = BCE_NETLINK_SPEED_1000HALF;
|
|
break;
|
|
case IFM_1000_T:
|
|
if (sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG)
|
|
return (EINVAL);
|
|
if (fdx != 0)
|
|
link = BCE_NETLINK_SPEED_1000FULL;
|
|
else
|
|
link = BCE_NETLINK_SPEED_1000HALF;
|
|
break;
|
|
case IFM_100_TX:
|
|
if (sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG)
|
|
return (EINVAL);
|
|
if (fdx != 0)
|
|
link = BCE_NETLINK_SPEED_100FULL;
|
|
else
|
|
link = BCE_NETLINK_SPEED_100HALF;
|
|
break;
|
|
case IFM_10_T:
|
|
if (sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG)
|
|
return (EINVAL);
|
|
if (fdx != 0)
|
|
link = BCE_NETLINK_SPEED_10FULL;
|
|
else
|
|
link = BCE_NETLINK_SPEED_10HALF;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
if (IFM_SUBTYPE(ifm->ifm_media) != IFM_AUTO) {
|
|
/*
|
|
* XXX
|
|
* Advertise pause capability for full-duplex media.
|
|
*/
|
|
if (fdx != 0)
|
|
link |= BCE_NETLINK_FC_PAUSE_SYM |
|
|
BCE_NETLINK_FC_PAUSE_ASYM;
|
|
if ((sc->bce_phy_flags &
|
|
BCE_PHY_REMOTE_PORT_FIBER_FLAG) == 0)
|
|
link |= BCE_NETLINK_PHY_APP_REMOTE |
|
|
BCE_NETLINK_ETH_AT_WIRESPEED;
|
|
}
|
|
|
|
bce_shmem_wr(sc, BCE_MB_ARGS_0, link);
|
|
error = bce_fw_sync(sc, BCE_DRV_MSG_CODE_CMD_SET_LINK);
|
|
} else {
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
|
|
/* Make sure the MII bus has been enumerated. */
|
|
if (mii) {
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
|
|
PHY_RESET(miisc);
|
|
error = mii_mediachg(mii);
|
|
}
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_PHY);
|
|
return (error);
|
|
}
|
|
|
|
|
|
static void
|
|
bce_ifmedia_sts_rphy(struct bce_softc *sc, struct ifmediareq *ifmr)
|
|
{
|
|
struct ifnet *ifp;
|
|
u32 link;
|
|
|
|
ifp = sc->bce_ifp;
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
link = bce_shmem_rd(sc, BCE_LINK_STATUS);
|
|
/* XXX Handle heart beat status? */
|
|
if ((link & BCE_LINK_STATUS_LINK_UP) != 0)
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
else {
|
|
ifmr->ifm_active |= IFM_NONE;
|
|
ifp->if_baudrate = 0;
|
|
return;
|
|
}
|
|
switch (link & BCE_LINK_STATUS_SPEED_MASK) {
|
|
case BCE_LINK_STATUS_10HALF:
|
|
ifmr->ifm_active |= IFM_10_T | IFM_HDX;
|
|
ifp->if_baudrate = IF_Mbps(10UL);
|
|
break;
|
|
case BCE_LINK_STATUS_10FULL:
|
|
ifmr->ifm_active |= IFM_10_T | IFM_FDX;
|
|
ifp->if_baudrate = IF_Mbps(10UL);
|
|
break;
|
|
case BCE_LINK_STATUS_100HALF:
|
|
ifmr->ifm_active |= IFM_100_TX | IFM_HDX;
|
|
ifp->if_baudrate = IF_Mbps(100UL);
|
|
break;
|
|
case BCE_LINK_STATUS_100FULL:
|
|
ifmr->ifm_active |= IFM_100_TX | IFM_FDX;
|
|
ifp->if_baudrate = IF_Mbps(100UL);
|
|
break;
|
|
case BCE_LINK_STATUS_1000HALF:
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG) == 0)
|
|
ifmr->ifm_active |= IFM_1000_T | IFM_HDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_1000_SX | IFM_HDX;
|
|
ifp->if_baudrate = IF_Mbps(1000UL);
|
|
break;
|
|
case BCE_LINK_STATUS_1000FULL:
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG) == 0)
|
|
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_1000_SX | IFM_FDX;
|
|
ifp->if_baudrate = IF_Mbps(1000UL);
|
|
break;
|
|
case BCE_LINK_STATUS_2500HALF:
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG) == 0) {
|
|
ifmr->ifm_active |= IFM_NONE;
|
|
return;
|
|
} else
|
|
ifmr->ifm_active |= IFM_2500_SX | IFM_HDX;
|
|
ifp->if_baudrate = IF_Mbps(2500UL);
|
|
break;
|
|
case BCE_LINK_STATUS_2500FULL:
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_PORT_FIBER_FLAG) == 0) {
|
|
ifmr->ifm_active |= IFM_NONE;
|
|
return;
|
|
} else
|
|
ifmr->ifm_active |= IFM_2500_SX | IFM_FDX;
|
|
ifp->if_baudrate = IF_Mbps(2500UL);
|
|
break;
|
|
default:
|
|
ifmr->ifm_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
if ((link & BCE_LINK_STATUS_RX_FC_ENABLED) != 0)
|
|
ifmr->ifm_active |= IFM_ETH_RXPAUSE;
|
|
if ((link & BCE_LINK_STATUS_TX_FC_ENABLED) != 0)
|
|
ifmr->ifm_active |= IFM_ETH_TXPAUSE;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Reports current media status. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii;
|
|
|
|
DBENTER(BCE_VERBOSE_PHY);
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
if ((ifp->if_flags & IFF_UP) == 0) {
|
|
BCE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0)
|
|
bce_ifmedia_sts_rphy(sc, ifmr);
|
|
else {
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
}
|
|
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_PHY);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles PHY generated interrupt events. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_phy_intr(struct bce_softc *sc)
|
|
{
|
|
u32 new_link_state, old_link_state;
|
|
|
|
DBENTER(BCE_VERBOSE_PHY | BCE_VERBOSE_INTR);
|
|
|
|
DBRUN(sc->phy_interrupts++);
|
|
|
|
new_link_state = sc->status_block->status_attn_bits &
|
|
STATUS_ATTN_BITS_LINK_STATE;
|
|
old_link_state = sc->status_block->status_attn_bits_ack &
|
|
STATUS_ATTN_BITS_LINK_STATE;
|
|
|
|
/* Handle any changes if the link state has changed. */
|
|
if (new_link_state != old_link_state) {
|
|
|
|
/* Update the status_attn_bits_ack field. */
|
|
if (new_link_state) {
|
|
REG_WR(sc, BCE_PCICFG_STATUS_BIT_SET_CMD,
|
|
STATUS_ATTN_BITS_LINK_STATE);
|
|
DBPRINT(sc, BCE_INFO_PHY, "%s(): Link is now UP.\n",
|
|
__FUNCTION__);
|
|
} else {
|
|
REG_WR(sc, BCE_PCICFG_STATUS_BIT_CLEAR_CMD,
|
|
STATUS_ATTN_BITS_LINK_STATE);
|
|
DBPRINT(sc, BCE_INFO_PHY, "%s(): Link is now DOWN.\n",
|
|
__FUNCTION__);
|
|
}
|
|
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0) {
|
|
if (new_link_state) {
|
|
if (bootverbose)
|
|
if_printf(sc->bce_ifp, "link UP\n");
|
|
if_link_state_change(sc->bce_ifp,
|
|
LINK_STATE_UP);
|
|
} else {
|
|
if (bootverbose)
|
|
if_printf(sc->bce_ifp, "link DOWN\n");
|
|
if_link_state_change(sc->bce_ifp,
|
|
LINK_STATE_DOWN);
|
|
}
|
|
}
|
|
/*
|
|
* Assume link is down and allow
|
|
* tick routine to update the state
|
|
* based on the actual media state.
|
|
*/
|
|
sc->bce_link_up = FALSE;
|
|
callout_stop(&sc->bce_tick_callout);
|
|
bce_tick(sc);
|
|
}
|
|
|
|
/* Acknowledge the link change interrupt. */
|
|
REG_WR(sc, BCE_EMAC_STATUS, BCE_EMAC_STATUS_LINK_CHANGE);
|
|
|
|
DBEXIT(BCE_VERBOSE_PHY | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Reads the receive consumer value from the status block (skipping over */
|
|
/* chain page pointer if necessary). */
|
|
/* */
|
|
/* Returns: */
|
|
/* hw_cons */
|
|
/****************************************************************************/
|
|
static inline u16
|
|
bce_get_hw_rx_cons(struct bce_softc *sc)
|
|
{
|
|
u16 hw_cons;
|
|
|
|
rmb();
|
|
hw_cons = sc->status_block->status_rx_quick_consumer_index0;
|
|
if ((hw_cons & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
|
|
hw_cons++;
|
|
|
|
return hw_cons;
|
|
}
|
|
|
|
/****************************************************************************/
|
|
/* Handles received frame interrupt events. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_rx_intr(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->bce_ifp;
|
|
struct l2_fhdr *l2fhdr;
|
|
struct ether_vlan_header *vh;
|
|
unsigned int pkt_len;
|
|
u16 sw_rx_cons, sw_rx_cons_idx, hw_rx_cons;
|
|
u32 status;
|
|
unsigned int rem_len;
|
|
u16 sw_pg_cons, sw_pg_cons_idx;
|
|
|
|
DBENTER(BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
DBRUN(sc->interrupts_rx++);
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(enter): rx_prod = 0x%04X, "
|
|
"rx_cons = 0x%04X, rx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->rx_prod, sc->rx_cons, sc->rx_prod_bseq);
|
|
|
|
/* Prepare the RX chain pages to be accessed by the host CPU. */
|
|
for (int i = 0; i < sc->rx_pages; i++)
|
|
bus_dmamap_sync(sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i], BUS_DMASYNC_POSTREAD);
|
|
|
|
/* Prepare the page chain pages to be accessed by the host CPU. */
|
|
if (bce_hdr_split == TRUE) {
|
|
for (int i = 0; i < sc->pg_pages; i++)
|
|
bus_dmamap_sync(sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i], BUS_DMASYNC_POSTREAD);
|
|
}
|
|
|
|
/* Get the hardware's view of the RX consumer index. */
|
|
hw_rx_cons = sc->hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
|
|
/* Get working copies of the driver's view of the consumer indices. */
|
|
sw_rx_cons = sc->rx_cons;
|
|
sw_pg_cons = sc->pg_cons;
|
|
|
|
/* Update some debug statistics counters */
|
|
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
|
|
sc->rx_low_watermark = sc->free_rx_bd);
|
|
DBRUNIF((sc->free_rx_bd == sc->max_rx_bd),
|
|
sc->rx_empty_count++);
|
|
|
|
/* Scan through the receive chain as long as there is work to do */
|
|
/* ToDo: Consider setting a limit on the number of packets processed. */
|
|
rmb();
|
|
while (sw_rx_cons != hw_rx_cons) {
|
|
struct mbuf *m0;
|
|
|
|
/* Convert the producer/consumer indices to an actual rx_bd index. */
|
|
sw_rx_cons_idx = RX_CHAIN_IDX(sw_rx_cons);
|
|
|
|
/* Unmap the mbuf from DMA space. */
|
|
bus_dmamap_sync(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[sw_rx_cons_idx],
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[sw_rx_cons_idx]);
|
|
|
|
/* Remove the mbuf from the RX chain. */
|
|
m0 = sc->rx_mbuf_ptr[sw_rx_cons_idx];
|
|
sc->rx_mbuf_ptr[sw_rx_cons_idx] = NULL;
|
|
DBRUN(sc->debug_rx_mbuf_alloc--);
|
|
sc->free_rx_bd++;
|
|
|
|
if(m0 == NULL) {
|
|
DBPRINT(sc, BCE_EXTREME_RECV,
|
|
"%s(): Oops! Empty mbuf pointer "
|
|
"found in sc->rx_mbuf_ptr[0x%04X]!\n",
|
|
__FUNCTION__, sw_rx_cons_idx);
|
|
goto bce_rx_int_next_rx;
|
|
}
|
|
|
|
/*
|
|
* Frames received on the NetXteme II are prepended
|
|
* with an l2_fhdr structure which provides status
|
|
* information about the received frame (including
|
|
* VLAN tags and checksum info). The frames are
|
|
* also automatically adjusted to word align the IP
|
|
* header (i.e. two null bytes are inserted before
|
|
* the Ethernet header). As a result the data
|
|
* DMA'd by the controller into the mbuf looks
|
|
* like this:
|
|
*
|
|
* +---------+-----+---------------------+-----+
|
|
* | l2_fhdr | pad | packet data | FCS |
|
|
* +---------+-----+---------------------+-----+
|
|
*
|
|
* The l2_fhdr needs to be checked and skipped and
|
|
* the FCS needs to be stripped before sending the
|
|
* packet up the stack.
|
|
*/
|
|
l2fhdr = mtod(m0, struct l2_fhdr *);
|
|
|
|
/* Get the packet data + FCS length and the status. */
|
|
pkt_len = l2fhdr->l2_fhdr_pkt_len;
|
|
status = l2fhdr->l2_fhdr_status;
|
|
|
|
/*
|
|
* Skip over the l2_fhdr and pad, resulting in the
|
|
* following data in the mbuf:
|
|
* +---------------------+-----+
|
|
* | packet data | FCS |
|
|
* +---------------------+-----+
|
|
*/
|
|
m_adj(m0, sizeof(struct l2_fhdr) + ETHER_ALIGN);
|
|
|
|
/*
|
|
* When split header mode is used, an ethernet frame
|
|
* may be split across the receive chain and the
|
|
* page chain. If that occurs an mbuf cluster must be
|
|
* reassembled from the individual mbuf pieces.
|
|
*/
|
|
if (bce_hdr_split == TRUE) {
|
|
/*
|
|
* Check whether the received frame fits in a single
|
|
* mbuf or not (i.e. packet data + FCS <=
|
|
* sc->rx_bd_mbuf_data_len bytes).
|
|
*/
|
|
if (pkt_len > m0->m_len) {
|
|
/*
|
|
* The received frame is larger than a single mbuf.
|
|
* If the frame was a TCP frame then only the TCP
|
|
* header is placed in the mbuf, the remaining
|
|
* payload (including FCS) is placed in the page
|
|
* chain, the SPLIT flag is set, and the header
|
|
* length is placed in the IP checksum field.
|
|
* If the frame is not a TCP frame then the mbuf
|
|
* is filled and the remaining bytes are placed
|
|
* in the page chain.
|
|
*/
|
|
|
|
DBPRINT(sc, BCE_INFO_RECV, "%s(): Found a large "
|
|
"packet.\n", __FUNCTION__);
|
|
DBRUN(sc->split_header_frames_rcvd++);
|
|
|
|
/*
|
|
* When the page chain is enabled and the TCP
|
|
* header has been split from the TCP payload,
|
|
* the ip_xsum structure will reflect the length
|
|
* of the TCP header, not the IP checksum. Set
|
|
* the packet length of the mbuf accordingly.
|
|
*/
|
|
if (status & L2_FHDR_STATUS_SPLIT) {
|
|
m0->m_len = l2fhdr->l2_fhdr_ip_xsum;
|
|
DBRUN(sc->split_header_tcp_frames_rcvd++);
|
|
}
|
|
|
|
rem_len = pkt_len - m0->m_len;
|
|
|
|
/* Pull mbufs off the page chain for any remaining data. */
|
|
while (rem_len > 0) {
|
|
struct mbuf *m_pg;
|
|
|
|
sw_pg_cons_idx = PG_CHAIN_IDX(sw_pg_cons);
|
|
|
|
/* Remove the mbuf from the page chain. */
|
|
m_pg = sc->pg_mbuf_ptr[sw_pg_cons_idx];
|
|
sc->pg_mbuf_ptr[sw_pg_cons_idx] = NULL;
|
|
DBRUN(sc->debug_pg_mbuf_alloc--);
|
|
sc->free_pg_bd++;
|
|
|
|
/* Unmap the page chain mbuf from DMA space. */
|
|
bus_dmamap_sync(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[sw_pg_cons_idx],
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[sw_pg_cons_idx]);
|
|
|
|
/* Adjust the mbuf length. */
|
|
if (rem_len < m_pg->m_len) {
|
|
/* The mbuf chain is complete. */
|
|
m_pg->m_len = rem_len;
|
|
rem_len = 0;
|
|
} else {
|
|
/* More packet data is waiting. */
|
|
rem_len -= m_pg->m_len;
|
|
}
|
|
|
|
/* Concatenate the mbuf cluster to the mbuf. */
|
|
m_cat(m0, m_pg);
|
|
|
|
sw_pg_cons = NEXT_PG_BD(sw_pg_cons);
|
|
}
|
|
|
|
/* Set the total packet length. */
|
|
m0->m_pkthdr.len = pkt_len;
|
|
|
|
} else {
|
|
/*
|
|
* The received packet is small and fits in a
|
|
* single mbuf (i.e. the l2_fhdr + pad + packet +
|
|
* FCS <= MHLEN). In other words, the packet is
|
|
* 154 bytes or less in size.
|
|
*/
|
|
|
|
DBPRINT(sc, BCE_INFO_RECV, "%s(): Found a small "
|
|
"packet.\n", __FUNCTION__);
|
|
|
|
/* Set the total packet length. */
|
|
m0->m_pkthdr.len = m0->m_len = pkt_len;
|
|
}
|
|
} else
|
|
/* Set the total packet length. */
|
|
m0->m_pkthdr.len = m0->m_len = pkt_len;
|
|
|
|
/* Remove the trailing Ethernet FCS. */
|
|
m_adj(m0, -ETHER_CRC_LEN);
|
|
|
|
/* Check that the resulting mbuf chain is valid. */
|
|
DBRUN(m_sanity(m0, FALSE));
|
|
DBRUNIF(((m0->m_len < ETHER_HDR_LEN) |
|
|
(m0->m_pkthdr.len > BCE_MAX_JUMBO_ETHER_MTU_VLAN)),
|
|
BCE_PRINTF("Invalid Ethernet frame size!\n");
|
|
m_print(m0, 128));
|
|
|
|
DBRUNIF(DB_RANDOMTRUE(l2fhdr_error_sim_control),
|
|
sc->l2fhdr_error_sim_count++;
|
|
status = status | L2_FHDR_ERRORS_PHY_DECODE);
|
|
|
|
/* Check the received frame for errors. */
|
|
if (status & (L2_FHDR_ERRORS_BAD_CRC |
|
|
L2_FHDR_ERRORS_PHY_DECODE | L2_FHDR_ERRORS_ALIGNMENT |
|
|
L2_FHDR_ERRORS_TOO_SHORT | L2_FHDR_ERRORS_GIANT_FRAME)) {
|
|
|
|
/* Log the error and release the mbuf. */
|
|
ifp->if_ierrors++;
|
|
sc->l2fhdr_error_count++;
|
|
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
goto bce_rx_int_next_rx;
|
|
}
|
|
|
|
/* Send the packet to the appropriate interface. */
|
|
m0->m_pkthdr.rcvif = ifp;
|
|
|
|
/* Assume no hardware checksum. */
|
|
m0->m_pkthdr.csum_flags = 0;
|
|
|
|
/* Validate the checksum if offload enabled. */
|
|
if (ifp->if_capenable & IFCAP_RXCSUM) {
|
|
|
|
/* Check for an IP datagram. */
|
|
if (!(status & L2_FHDR_STATUS_SPLIT) &&
|
|
(status & L2_FHDR_STATUS_IP_DATAGRAM)) {
|
|
m0->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
|
|
DBRUN(sc->csum_offload_ip++);
|
|
/* Check if the IP checksum is valid. */
|
|
if ((l2fhdr->l2_fhdr_ip_xsum ^ 0xffff) == 0)
|
|
m0->m_pkthdr.csum_flags |=
|
|
CSUM_IP_VALID;
|
|
}
|
|
|
|
/* Check for a valid TCP/UDP frame. */
|
|
if (status & (L2_FHDR_STATUS_TCP_SEGMENT |
|
|
L2_FHDR_STATUS_UDP_DATAGRAM)) {
|
|
|
|
/* Check for a good TCP/UDP checksum. */
|
|
if ((status & (L2_FHDR_ERRORS_TCP_XSUM |
|
|
L2_FHDR_ERRORS_UDP_XSUM)) == 0) {
|
|
DBRUN(sc->csum_offload_tcp_udp++);
|
|
m0->m_pkthdr.csum_data =
|
|
l2fhdr->l2_fhdr_tcp_udp_xsum;
|
|
m0->m_pkthdr.csum_flags |=
|
|
(CSUM_DATA_VALID
|
|
| CSUM_PSEUDO_HDR);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Attach the VLAN tag. */
|
|
if (status & L2_FHDR_STATUS_L2_VLAN_TAG) {
|
|
DBRUN(sc->vlan_tagged_frames_rcvd++);
|
|
if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) {
|
|
DBRUN(sc->vlan_tagged_frames_stripped++);
|
|
#if __FreeBSD_version < 700000
|
|
VLAN_INPUT_TAG(ifp, m0,
|
|
l2fhdr->l2_fhdr_vlan_tag, continue);
|
|
#else
|
|
m0->m_pkthdr.ether_vtag =
|
|
l2fhdr->l2_fhdr_vlan_tag;
|
|
m0->m_flags |= M_VLANTAG;
|
|
#endif
|
|
} else {
|
|
/*
|
|
* bce(4) controllers can't disable VLAN
|
|
* tag stripping if management firmware
|
|
* (ASF/IPMI/UMP) is running. So we always
|
|
* strip VLAN tag and manually reconstruct
|
|
* the VLAN frame by appending stripped
|
|
* VLAN tag in driver if VLAN tag stripping
|
|
* was disabled.
|
|
*
|
|
* TODO: LLC SNAP handling.
|
|
*/
|
|
bcopy(mtod(m0, uint8_t *),
|
|
mtod(m0, uint8_t *) - ETHER_VLAN_ENCAP_LEN,
|
|
ETHER_ADDR_LEN * 2);
|
|
m0->m_data -= ETHER_VLAN_ENCAP_LEN;
|
|
vh = mtod(m0, struct ether_vlan_header *);
|
|
vh->evl_encap_proto = htons(ETHERTYPE_VLAN);
|
|
vh->evl_tag = htons(l2fhdr->l2_fhdr_vlan_tag);
|
|
m0->m_pkthdr.len += ETHER_VLAN_ENCAP_LEN;
|
|
m0->m_len += ETHER_VLAN_ENCAP_LEN;
|
|
}
|
|
}
|
|
|
|
/* Increment received packet statistics. */
|
|
ifp->if_ipackets++;
|
|
|
|
bce_rx_int_next_rx:
|
|
sw_rx_cons = NEXT_RX_BD(sw_rx_cons);
|
|
|
|
/* If we have a packet, pass it up the stack */
|
|
if (m0) {
|
|
/* Make sure we don't lose our place when we release the lock. */
|
|
sc->rx_cons = sw_rx_cons;
|
|
sc->pg_cons = sw_pg_cons;
|
|
|
|
BCE_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m0);
|
|
BCE_LOCK(sc);
|
|
|
|
/* Recover our place. */
|
|
sw_rx_cons = sc->rx_cons;
|
|
sw_pg_cons = sc->pg_cons;
|
|
}
|
|
|
|
/* Refresh hw_cons to see if there's new work */
|
|
if (sw_rx_cons == hw_rx_cons)
|
|
hw_rx_cons = sc->hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
}
|
|
|
|
/* No new packets. Refill the page chain. */
|
|
if (bce_hdr_split == TRUE) {
|
|
sc->pg_cons = sw_pg_cons;
|
|
bce_fill_pg_chain(sc);
|
|
}
|
|
|
|
/* No new packets. Refill the RX chain. */
|
|
sc->rx_cons = sw_rx_cons;
|
|
bce_fill_rx_chain(sc);
|
|
|
|
/* Prepare the page chain pages to be accessed by the NIC. */
|
|
for (int i = 0; i < sc->rx_pages; i++)
|
|
bus_dmamap_sync(sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i], BUS_DMASYNC_PREWRITE);
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
for (int i = 0; i < sc->pg_pages; i++)
|
|
bus_dmamap_sync(sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i], BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(exit): rx_prod = 0x%04X, "
|
|
"rx_cons = 0x%04X, rx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->rx_prod, sc->rx_cons, sc->rx_prod_bseq);
|
|
DBEXIT(BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Reads the transmit consumer value from the status block (skipping over */
|
|
/* chain page pointer if necessary). */
|
|
/* */
|
|
/* Returns: */
|
|
/* hw_cons */
|
|
/****************************************************************************/
|
|
static inline u16
|
|
bce_get_hw_tx_cons(struct bce_softc *sc)
|
|
{
|
|
u16 hw_cons;
|
|
|
|
mb();
|
|
hw_cons = sc->status_block->status_tx_quick_consumer_index0;
|
|
if ((hw_cons & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
|
|
hw_cons++;
|
|
|
|
return hw_cons;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles transmit completion interrupt events. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_tx_intr(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->bce_ifp;
|
|
u16 hw_tx_cons, sw_tx_cons, sw_tx_chain_cons;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND | BCE_VERBOSE_INTR);
|
|
DBRUN(sc->interrupts_tx++);
|
|
DBPRINT(sc, BCE_EXTREME_SEND, "%s(enter): tx_prod = 0x%04X, "
|
|
"tx_cons = 0x%04X, tx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->tx_prod, sc->tx_cons, sc->tx_prod_bseq);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Get the hardware's view of the TX consumer index. */
|
|
hw_tx_cons = sc->hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
sw_tx_cons = sc->tx_cons;
|
|
|
|
/* Prevent speculative reads of the status block. */
|
|
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
|
|
BUS_SPACE_BARRIER_READ);
|
|
|
|
/* Cycle through any completed TX chain page entries. */
|
|
while (sw_tx_cons != hw_tx_cons) {
|
|
#ifdef BCE_DEBUG
|
|
struct tx_bd *txbd = NULL;
|
|
#endif
|
|
sw_tx_chain_cons = TX_CHAIN_IDX(sw_tx_cons);
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(): hw_tx_cons = 0x%04X, sw_tx_cons = 0x%04X, "
|
|
"sw_tx_chain_cons = 0x%04X\n",
|
|
__FUNCTION__, hw_tx_cons, sw_tx_cons, sw_tx_chain_cons);
|
|
|
|
DBRUNIF((sw_tx_chain_cons > MAX_TX_BD_ALLOC),
|
|
BCE_PRINTF("%s(%d): TX chain consumer out of range! "
|
|
" 0x%04X > 0x%04X\n", __FILE__, __LINE__, sw_tx_chain_cons,
|
|
(int) MAX_TX_BD_ALLOC);
|
|
bce_breakpoint(sc));
|
|
|
|
DBRUN(txbd = &sc->tx_bd_chain[TX_PAGE(sw_tx_chain_cons)]
|
|
[TX_IDX(sw_tx_chain_cons)]);
|
|
|
|
DBRUNIF((txbd == NULL),
|
|
BCE_PRINTF("%s(%d): Unexpected NULL tx_bd[0x%04X]!\n",
|
|
__FILE__, __LINE__, sw_tx_chain_cons);
|
|
bce_breakpoint(sc));
|
|
|
|
DBRUNMSG(BCE_INFO_SEND, BCE_PRINTF("%s(): ", __FUNCTION__);
|
|
bce_dump_txbd(sc, sw_tx_chain_cons, txbd));
|
|
|
|
/*
|
|
* Free the associated mbuf. Remember
|
|
* that only the last tx_bd of a packet
|
|
* has an mbuf pointer and DMA map.
|
|
*/
|
|
if (sc->tx_mbuf_ptr[sw_tx_chain_cons] != NULL) {
|
|
|
|
/* Validate that this is the last tx_bd. */
|
|
DBRUNIF((!(txbd->tx_bd_flags & TX_BD_FLAGS_END)),
|
|
BCE_PRINTF("%s(%d): tx_bd END flag not set but "
|
|
"txmbuf == NULL!\n", __FILE__, __LINE__);
|
|
bce_breakpoint(sc));
|
|
|
|
DBRUNMSG(BCE_INFO_SEND,
|
|
BCE_PRINTF("%s(): Unloading map/freeing mbuf "
|
|
"from tx_bd[0x%04X]\n", __FUNCTION__,
|
|
sw_tx_chain_cons));
|
|
|
|
/* Unmap the mbuf. */
|
|
bus_dmamap_unload(sc->tx_mbuf_tag,
|
|
sc->tx_mbuf_map[sw_tx_chain_cons]);
|
|
|
|
/* Free the mbuf. */
|
|
m_freem(sc->tx_mbuf_ptr[sw_tx_chain_cons]);
|
|
sc->tx_mbuf_ptr[sw_tx_chain_cons] = NULL;
|
|
DBRUN(sc->debug_tx_mbuf_alloc--);
|
|
|
|
ifp->if_opackets++;
|
|
}
|
|
|
|
sc->used_tx_bd--;
|
|
sw_tx_cons = NEXT_TX_BD(sw_tx_cons);
|
|
|
|
/* Refresh hw_cons to see if there's new work. */
|
|
hw_tx_cons = sc->hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
|
|
/* Prevent speculative reads of the status block. */
|
|
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
|
|
BUS_SPACE_BARRIER_READ);
|
|
}
|
|
|
|
/* Clear the TX timeout timer. */
|
|
sc->watchdog_timer = 0;
|
|
|
|
/* Clear the tx hardware queue full flag. */
|
|
if (sc->used_tx_bd < sc->max_tx_bd) {
|
|
DBRUNIF((ifp->if_drv_flags & IFF_DRV_OACTIVE),
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(): Open TX chain! %d/%d (used/total)\n",
|
|
__FUNCTION__, sc->used_tx_bd, sc->max_tx_bd));
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
}
|
|
|
|
sc->tx_cons = sw_tx_cons;
|
|
|
|
DBPRINT(sc, BCE_EXTREME_SEND, "%s(exit): tx_prod = 0x%04X, "
|
|
"tx_cons = 0x%04X, tx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->tx_prod, sc->tx_cons, sc->tx_prod_bseq);
|
|
DBEXIT(BCE_VERBOSE_SEND | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Disables interrupt generation. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_disable_intr(struct bce_softc *sc)
|
|
{
|
|
DBENTER(BCE_VERBOSE_INTR);
|
|
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, BCE_PCICFG_INT_ACK_CMD_MASK_INT);
|
|
REG_RD(sc, BCE_PCICFG_INT_ACK_CMD);
|
|
|
|
DBEXIT(BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Enables interrupt generation. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_enable_intr(struct bce_softc *sc, int coal_now)
|
|
{
|
|
DBENTER(BCE_VERBOSE_INTR);
|
|
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
|
|
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID |
|
|
BCE_PCICFG_INT_ACK_CMD_MASK_INT | sc->last_status_idx);
|
|
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
|
|
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx);
|
|
|
|
/* Force an immediate interrupt (whether there is new data or not). */
|
|
if (coal_now)
|
|
REG_WR(sc, BCE_HC_COMMAND, sc->hc_command | BCE_HC_COMMAND_COAL_NOW);
|
|
|
|
DBEXIT(BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles controller initialization. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_locked(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
u32 ether_mtu = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Check if the driver is still running and bail out if it is. */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
goto bce_init_locked_exit;
|
|
|
|
bce_stop(sc);
|
|
|
|
if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) {
|
|
BCE_PRINTF("%s(%d): Controller reset failed!\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_init_locked_exit;
|
|
}
|
|
|
|
if (bce_chipinit(sc)) {
|
|
BCE_PRINTF("%s(%d): Controller initialization failed!\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_init_locked_exit;
|
|
}
|
|
|
|
if (bce_blockinit(sc)) {
|
|
BCE_PRINTF("%s(%d): Block initialization failed!\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_init_locked_exit;
|
|
}
|
|
|
|
/* Load our MAC address. */
|
|
bcopy(IF_LLADDR(sc->bce_ifp), sc->eaddr, ETHER_ADDR_LEN);
|
|
bce_set_mac_addr(sc);
|
|
|
|
if (bce_hdr_split == FALSE)
|
|
bce_get_rx_buffer_sizes(sc, ifp->if_mtu);
|
|
/*
|
|
* Calculate and program the hardware Ethernet MTU
|
|
* size. Be generous on the receive if we have room
|
|
* and allowed by the user.
|
|
*/
|
|
if (bce_strict_rx_mtu == TRUE)
|
|
ether_mtu = ifp->if_mtu;
|
|
else {
|
|
if (bce_hdr_split == TRUE) {
|
|
if (ifp->if_mtu <= (sc->rx_bd_mbuf_data_len +
|
|
sc->pg_bd_mbuf_alloc_size))
|
|
ether_mtu = sc->rx_bd_mbuf_data_len +
|
|
sc->pg_bd_mbuf_alloc_size;
|
|
else
|
|
ether_mtu = ifp->if_mtu;
|
|
} else {
|
|
if (ifp->if_mtu <= sc->rx_bd_mbuf_data_len)
|
|
ether_mtu = sc->rx_bd_mbuf_data_len;
|
|
else
|
|
ether_mtu = ifp->if_mtu;
|
|
}
|
|
}
|
|
|
|
ether_mtu += ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN + ETHER_CRC_LEN;
|
|
|
|
DBPRINT(sc, BCE_INFO_MISC, "%s(): setting h/w mtu = %d\n",
|
|
__FUNCTION__, ether_mtu);
|
|
|
|
/* Program the mtu, enabling jumbo frame support if necessary. */
|
|
if (ether_mtu > (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN))
|
|
REG_WR(sc, BCE_EMAC_RX_MTU_SIZE,
|
|
min(ether_mtu, BCE_MAX_JUMBO_ETHER_MTU) |
|
|
BCE_EMAC_RX_MTU_SIZE_JUMBO_ENA);
|
|
else
|
|
REG_WR(sc, BCE_EMAC_RX_MTU_SIZE, ether_mtu);
|
|
|
|
/* Program appropriate promiscuous/multicast filtering. */
|
|
bce_set_rx_mode(sc);
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): pg_bd_mbuf_alloc_size = %d\n",
|
|
__FUNCTION__, sc->pg_bd_mbuf_alloc_size);
|
|
|
|
/* Init page buffer descriptor chain. */
|
|
bce_init_pg_chain(sc);
|
|
}
|
|
|
|
/* Init RX buffer descriptor chain. */
|
|
bce_init_rx_chain(sc);
|
|
|
|
/* Init TX buffer descriptor chain. */
|
|
bce_init_tx_chain(sc);
|
|
|
|
/* Enable host interrupts. */
|
|
bce_enable_intr(sc, 1);
|
|
|
|
bce_ifmedia_upd_locked(ifp);
|
|
|
|
/* Let the OS know the driver is up and running. */
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
callout_reset(&sc->bce_tick_callout, hz, bce_tick, sc);
|
|
|
|
bce_init_locked_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the controller just enough so that any management firmware */
|
|
/* running on the device will continue to operate correctly. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_mgmt_init_locked(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Bail out if management firmware is not running. */
|
|
if (!(sc->bce_flags & BCE_MFW_ENABLE_FLAG)) {
|
|
DBPRINT(sc, BCE_VERBOSE_SPECIAL,
|
|
"No management firmware running...\n");
|
|
goto bce_mgmt_init_locked_exit;
|
|
}
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Enable all critical blocks in the MAC. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, BCE_MISC_ENABLE_DEFAULT);
|
|
REG_RD(sc, BCE_MISC_ENABLE_SET_BITS);
|
|
DELAY(20);
|
|
|
|
bce_ifmedia_upd_locked(ifp);
|
|
|
|
bce_mgmt_init_locked_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles controller initialization when called from an unlocked routine. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init(void *xsc)
|
|
{
|
|
struct bce_softc *sc = xsc;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK(sc);
|
|
bce_init_locked(sc);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Modifies an mbuf for TSO on the hardware. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Pointer to a modified mbuf. */
|
|
/****************************************************************************/
|
|
static struct mbuf *
|
|
bce_tso_setup(struct bce_softc *sc, struct mbuf **m_head, u16 *flags)
|
|
{
|
|
struct mbuf *m;
|
|
struct ether_header *eh;
|
|
struct ip *ip;
|
|
struct tcphdr *th;
|
|
u16 etype;
|
|
int hdr_len, ip_hlen = 0, tcp_hlen = 0, ip_len = 0;
|
|
|
|
DBRUN(sc->tso_frames_requested++);
|
|
|
|
/* Controller may modify mbuf chains. */
|
|
if (M_WRITABLE(*m_head) == 0) {
|
|
m = m_dup(*m_head, M_DONTWAIT);
|
|
m_freem(*m_head);
|
|
if (m == NULL) {
|
|
sc->mbuf_alloc_failed_count++;
|
|
*m_head = NULL;
|
|
return (NULL);
|
|
}
|
|
*m_head = m;
|
|
}
|
|
|
|
/*
|
|
* For TSO the controller needs two pieces of info,
|
|
* the MSS and the IP+TCP options length.
|
|
*/
|
|
m = m_pullup(*m_head, sizeof(struct ether_header) + sizeof(struct ip));
|
|
if (m == NULL) {
|
|
*m_head = NULL;
|
|
return (NULL);
|
|
}
|
|
eh = mtod(m, struct ether_header *);
|
|
etype = ntohs(eh->ether_type);
|
|
|
|
/* Check for supported TSO Ethernet types (only IPv4 for now) */
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *)(m->m_data + sizeof(struct ether_header));
|
|
/* TSO only supported for TCP protocol. */
|
|
if (ip->ip_p != IPPROTO_TCP) {
|
|
BCE_PRINTF("%s(%d): TSO enabled for non-TCP frame!.\n",
|
|
__FILE__, __LINE__);
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (NULL);
|
|
}
|
|
|
|
/* Get IP header length in bytes (min 20) */
|
|
ip_hlen = ip->ip_hl << 2;
|
|
m = m_pullup(*m_head, sizeof(struct ether_header) + ip_hlen +
|
|
sizeof(struct tcphdr));
|
|
if (m == NULL) {
|
|
*m_head = NULL;
|
|
return (NULL);
|
|
}
|
|
|
|
/* Get the TCP header length in bytes (min 20) */
|
|
ip = (struct ip *)(m->m_data + sizeof(struct ether_header));
|
|
th = (struct tcphdr *)((caddr_t)ip + ip_hlen);
|
|
tcp_hlen = (th->th_off << 2);
|
|
|
|
/* Make sure all IP/TCP options live in the same buffer. */
|
|
m = m_pullup(*m_head, sizeof(struct ether_header)+ ip_hlen +
|
|
tcp_hlen);
|
|
if (m == NULL) {
|
|
*m_head = NULL;
|
|
return (NULL);
|
|
}
|
|
|
|
/* Clear IP header length and checksum, will be calc'd by h/w. */
|
|
ip = (struct ip *)(m->m_data + sizeof(struct ether_header));
|
|
ip_len = ip->ip_len;
|
|
ip->ip_len = 0;
|
|
ip->ip_sum = 0;
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
BCE_PRINTF("%s(%d): TSO over IPv6 not supported!.\n",
|
|
__FILE__, __LINE__);
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (NULL);
|
|
/* NOT REACHED */
|
|
default:
|
|
BCE_PRINTF("%s(%d): TSO enabled for unsupported protocol!.\n",
|
|
__FILE__, __LINE__);
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (NULL);
|
|
}
|
|
|
|
hdr_len = sizeof(struct ether_header) + ip_hlen + tcp_hlen;
|
|
|
|
DBPRINT(sc, BCE_EXTREME_SEND, "%s(): hdr_len = %d, e_hlen = %d, "
|
|
"ip_hlen = %d, tcp_hlen = %d, ip_len = %d\n",
|
|
__FUNCTION__, hdr_len, (int) sizeof(struct ether_header), ip_hlen,
|
|
tcp_hlen, ip_len);
|
|
|
|
/* Set the LSO flag in the TX BD */
|
|
*flags |= TX_BD_FLAGS_SW_LSO;
|
|
|
|
/* Set the length of IP + TCP options (in 32 bit words) */
|
|
*flags |= (((ip_hlen + tcp_hlen - sizeof(struct ip) -
|
|
sizeof(struct tcphdr)) >> 2) << 8);
|
|
|
|
DBRUN(sc->tso_frames_completed++);
|
|
return (*m_head);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Encapsultes an mbuf cluster into the tx_bd chain structure and makes the */
|
|
/* memory visible to the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/* Modified: */
|
|
/* m_head: May be set to NULL if MBUF is excessively fragmented. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_tx_encap(struct bce_softc *sc, struct mbuf **m_head)
|
|
{
|
|
bus_dma_segment_t segs[BCE_MAX_SEGMENTS];
|
|
bus_dmamap_t map;
|
|
struct tx_bd *txbd = NULL;
|
|
struct mbuf *m0;
|
|
u16 prod, chain_prod, mss = 0, vlan_tag = 0, flags = 0;
|
|
u32 prod_bseq;
|
|
|
|
#ifdef BCE_DEBUG
|
|
u16 debug_prod;
|
|
#endif
|
|
|
|
int i, error, nsegs, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND);
|
|
|
|
/* Make sure we have room in the TX chain. */
|
|
if (sc->used_tx_bd >= sc->max_tx_bd)
|
|
goto bce_tx_encap_exit;
|
|
|
|
/* Transfer any checksum offload flags to the bd. */
|
|
m0 = *m_head;
|
|
if (m0->m_pkthdr.csum_flags) {
|
|
if (m0->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
m0 = bce_tso_setup(sc, m_head, &flags);
|
|
if (m0 == NULL) {
|
|
DBRUN(sc->tso_frames_failed++);
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
mss = htole16(m0->m_pkthdr.tso_segsz);
|
|
} else {
|
|
if (m0->m_pkthdr.csum_flags & CSUM_IP)
|
|
flags |= TX_BD_FLAGS_IP_CKSUM;
|
|
if (m0->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
|
|
flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
|
|
}
|
|
}
|
|
|
|
/* Transfer any VLAN tags to the bd. */
|
|
if (m0->m_flags & M_VLANTAG) {
|
|
flags |= TX_BD_FLAGS_VLAN_TAG;
|
|
vlan_tag = m0->m_pkthdr.ether_vtag;
|
|
}
|
|
|
|
/* Map the mbuf into DMAable memory. */
|
|
prod = sc->tx_prod;
|
|
chain_prod = TX_CHAIN_IDX(prod);
|
|
map = sc->tx_mbuf_map[chain_prod];
|
|
|
|
/* Map the mbuf into our DMA address space. */
|
|
error = bus_dmamap_load_mbuf_sg(sc->tx_mbuf_tag, map, m0,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
/* Check if the DMA mapping was successful */
|
|
if (error == EFBIG) {
|
|
sc->mbuf_frag_count++;
|
|
|
|
/* Try to defrag the mbuf. */
|
|
m0 = m_collapse(*m_head, M_DONTWAIT, BCE_MAX_SEGMENTS);
|
|
if (m0 == NULL) {
|
|
/* Defrag was unsuccessful */
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
sc->mbuf_alloc_failed_count++;
|
|
rc = ENOBUFS;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
|
|
/* Defrag was successful, try mapping again */
|
|
*m_head = m0;
|
|
error = bus_dmamap_load_mbuf_sg(sc->tx_mbuf_tag,
|
|
map, m0, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
/* Still getting an error after a defrag. */
|
|
if (error == ENOMEM) {
|
|
/* Insufficient DMA buffers available. */
|
|
sc->dma_map_addr_tx_failed_count++;
|
|
rc = error;
|
|
goto bce_tx_encap_exit;
|
|
} else if (error != 0) {
|
|
/* Release it and return an error. */
|
|
BCE_PRINTF("%s(%d): Unknown error mapping mbuf into "
|
|
"TX chain!\n", __FILE__, __LINE__);
|
|
m_freem(m0);
|
|
*m_head = NULL;
|
|
sc->dma_map_addr_tx_failed_count++;
|
|
rc = ENOBUFS;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
} else if (error == ENOMEM) {
|
|
/* Insufficient DMA buffers available. */
|
|
sc->dma_map_addr_tx_failed_count++;
|
|
rc = error;
|
|
goto bce_tx_encap_exit;
|
|
} else if (error != 0) {
|
|
m_freem(m0);
|
|
*m_head = NULL;
|
|
sc->dma_map_addr_tx_failed_count++;
|
|
rc = error;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
|
|
/* Make sure there's room in the chain */
|
|
if (nsegs > (sc->max_tx_bd - sc->used_tx_bd)) {
|
|
bus_dmamap_unload(sc->tx_mbuf_tag, map);
|
|
rc = ENOBUFS;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
|
|
/* prod points to an empty tx_bd at this point. */
|
|
prod_bseq = sc->tx_prod_bseq;
|
|
|
|
#ifdef BCE_DEBUG
|
|
debug_prod = chain_prod;
|
|
#endif
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(start): prod = 0x%04X, chain_prod = 0x%04X, "
|
|
"prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, prod, chain_prod, prod_bseq);
|
|
|
|
/*
|
|
* Cycle through each mbuf segment that makes up
|
|
* the outgoing frame, gathering the mapping info
|
|
* for that segment and creating a tx_bd for
|
|
* the mbuf.
|
|
*/
|
|
for (i = 0; i < nsegs ; i++) {
|
|
|
|
chain_prod = TX_CHAIN_IDX(prod);
|
|
txbd= &sc->tx_bd_chain[TX_PAGE(chain_prod)]
|
|
[TX_IDX(chain_prod)];
|
|
|
|
txbd->tx_bd_haddr_lo =
|
|
htole32(BCE_ADDR_LO(segs[i].ds_addr));
|
|
txbd->tx_bd_haddr_hi =
|
|
htole32(BCE_ADDR_HI(segs[i].ds_addr));
|
|
txbd->tx_bd_mss_nbytes = htole32(mss << 16) |
|
|
htole16(segs[i].ds_len);
|
|
txbd->tx_bd_vlan_tag = htole16(vlan_tag);
|
|
txbd->tx_bd_flags = htole16(flags);
|
|
prod_bseq += segs[i].ds_len;
|
|
if (i == 0)
|
|
txbd->tx_bd_flags |= htole16(TX_BD_FLAGS_START);
|
|
prod = NEXT_TX_BD(prod);
|
|
}
|
|
|
|
/* Set the END flag on the last TX buffer descriptor. */
|
|
txbd->tx_bd_flags |= htole16(TX_BD_FLAGS_END);
|
|
|
|
DBRUNMSG(BCE_EXTREME_SEND,
|
|
bce_dump_tx_chain(sc, debug_prod, nsegs));
|
|
|
|
/*
|
|
* Ensure that the mbuf pointer for this transmission
|
|
* is placed at the array index of the last
|
|
* descriptor in this chain. This is done
|
|
* because a single map is used for all
|
|
* segments of the mbuf and we don't want to
|
|
* unload the map before all of the segments
|
|
* have been freed.
|
|
*/
|
|
sc->tx_mbuf_ptr[chain_prod] = m0;
|
|
sc->used_tx_bd += nsegs;
|
|
|
|
/* Update some debug statistic counters */
|
|
DBRUNIF((sc->used_tx_bd > sc->tx_hi_watermark),
|
|
sc->tx_hi_watermark = sc->used_tx_bd);
|
|
DBRUNIF((sc->used_tx_bd == sc->max_tx_bd), sc->tx_full_count++);
|
|
DBRUNIF(sc->debug_tx_mbuf_alloc++);
|
|
|
|
DBRUNMSG(BCE_EXTREME_SEND, bce_dump_tx_mbuf_chain(sc, chain_prod, 1));
|
|
|
|
/* prod points to the next free tx_bd at this point. */
|
|
sc->tx_prod = prod;
|
|
sc->tx_prod_bseq = prod_bseq;
|
|
|
|
/* Tell the chip about the waiting TX frames. */
|
|
REG_WR16(sc, MB_GET_CID_ADDR(TX_CID) +
|
|
BCE_L2MQ_TX_HOST_BIDX, sc->tx_prod);
|
|
REG_WR(sc, MB_GET_CID_ADDR(TX_CID) +
|
|
BCE_L2MQ_TX_HOST_BSEQ, sc->tx_prod_bseq);
|
|
|
|
bce_tx_encap_exit:
|
|
DBEXIT(BCE_VERBOSE_SEND);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Main transmit routine when called from another routine with a lock. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_start_locked(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct mbuf *m_head = NULL;
|
|
int count = 0;
|
|
u16 tx_prod, tx_chain_prod;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* prod points to the next free tx_bd. */
|
|
tx_prod = sc->tx_prod;
|
|
tx_chain_prod = TX_CHAIN_IDX(tx_prod);
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(enter): tx_prod = 0x%04X, tx_chain_prod = 0x%04X, "
|
|
"tx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, tx_prod, tx_chain_prod, sc->tx_prod_bseq);
|
|
|
|
/* If there's no link or the transmit queue is empty then just exit. */
|
|
if (sc->bce_link_up == FALSE) {
|
|
DBPRINT(sc, BCE_INFO_SEND, "%s(): No link.\n",
|
|
__FUNCTION__);
|
|
goto bce_start_locked_exit;
|
|
}
|
|
|
|
if (IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
DBPRINT(sc, BCE_INFO_SEND, "%s(): Transmit queue empty.\n",
|
|
__FUNCTION__);
|
|
goto bce_start_locked_exit;
|
|
}
|
|
|
|
/*
|
|
* Keep adding entries while there is space in the ring.
|
|
*/
|
|
while (sc->used_tx_bd < sc->max_tx_bd) {
|
|
|
|
/* Check for any frames to send. */
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
|
|
/* Stop when the transmit queue is empty. */
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/*
|
|
* Pack the data into the transmit ring. If we
|
|
* don't have room, place the mbuf back at the
|
|
* head of the queue and set the OACTIVE flag
|
|
* to wait for the NIC to drain the chain.
|
|
*/
|
|
if (bce_tx_encap(sc, &m_head)) {
|
|
if (m_head != NULL)
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"TX chain is closed for business! Total "
|
|
"tx_bd used = %d\n", sc->used_tx_bd);
|
|
break;
|
|
}
|
|
|
|
count++;
|
|
|
|
/* Send a copy of the frame to any BPF listeners. */
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
}
|
|
|
|
/* Exit if no packets were dequeued. */
|
|
if (count == 0) {
|
|
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): No packets were "
|
|
"dequeued\n", __FUNCTION__);
|
|
goto bce_start_locked_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): Inserted %d frames into "
|
|
"send queue.\n", __FUNCTION__, count);
|
|
|
|
/* Set the tx timeout. */
|
|
sc->watchdog_timer = BCE_TX_TIMEOUT;
|
|
|
|
DBRUNMSG(BCE_VERBOSE_SEND, bce_dump_ctx(sc, TX_CID));
|
|
DBRUNMSG(BCE_VERBOSE_SEND, bce_dump_mq_regs(sc));
|
|
|
|
bce_start_locked_exit:
|
|
DBEXIT(BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
return;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Main transmit routine when called from another routine without a lock. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_start(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND);
|
|
|
|
BCE_LOCK(sc);
|
|
bce_start_locked(ifp);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_SEND);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles any IOCTL calls from the operating system. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int mask, error = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_MISC);
|
|
|
|
switch(command) {
|
|
|
|
/* Set the interface MTU. */
|
|
case SIOCSIFMTU:
|
|
/* Check that the MTU setting is supported. */
|
|
if ((ifr->ifr_mtu < BCE_MIN_MTU) ||
|
|
(ifr->ifr_mtu > BCE_MAX_JUMBO_MTU)) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_MISC,
|
|
"SIOCSIFMTU: Changing MTU from %d to %d\n",
|
|
(int) ifp->if_mtu, (int) ifr->ifr_mtu);
|
|
|
|
BCE_LOCK(sc);
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
bce_init_locked(sc);
|
|
}
|
|
BCE_UNLOCK(sc);
|
|
break;
|
|
|
|
/* Set interface flags. */
|
|
case SIOCSIFFLAGS:
|
|
DBPRINT(sc, BCE_VERBOSE_SPECIAL, "Received SIOCSIFFLAGS\n");
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
/* Check if the interface is up. */
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
/* Change promiscuous/multicast flags as necessary. */
|
|
bce_set_rx_mode(sc);
|
|
} else {
|
|
/* Start the HW */
|
|
bce_init_locked(sc);
|
|
}
|
|
} else {
|
|
/* The interface is down, check if driver is running. */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
bce_stop(sc);
|
|
|
|
/* If MFW is running, restart the controller a bit. */
|
|
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG) {
|
|
bce_reset(sc, BCE_DRV_MSG_CODE_RESET);
|
|
bce_chipinit(sc);
|
|
bce_mgmt_init_locked(sc);
|
|
}
|
|
}
|
|
}
|
|
|
|
BCE_UNLOCK(sc);
|
|
break;
|
|
|
|
/* Add/Delete multicast address */
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
DBPRINT(sc, BCE_VERBOSE_MISC,
|
|
"Received SIOCADDMULTI/SIOCDELMULTI\n");
|
|
|
|
BCE_LOCK(sc);
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
bce_set_rx_mode(sc);
|
|
BCE_UNLOCK(sc);
|
|
|
|
break;
|
|
|
|
/* Set/Get Interface media */
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
DBPRINT(sc, BCE_VERBOSE_MISC,
|
|
"Received SIOCSIFMEDIA/SIOCGIFMEDIA\n");
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0)
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->bce_ifmedia,
|
|
command);
|
|
else {
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media,
|
|
command);
|
|
}
|
|
break;
|
|
|
|
/* Set interface capability */
|
|
case SIOCSIFCAP:
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
DBPRINT(sc, BCE_INFO_MISC,
|
|
"Received SIOCSIFCAP = 0x%08X\n", (u32) mask);
|
|
|
|
/* Toggle the TX checksum capabilities enable flag. */
|
|
if (mask & IFCAP_TXCSUM &&
|
|
ifp->if_capabilities & IFCAP_TXCSUM) {
|
|
ifp->if_capenable ^= IFCAP_TXCSUM;
|
|
if (IFCAP_TXCSUM & ifp->if_capenable)
|
|
ifp->if_hwassist |= BCE_IF_HWASSIST;
|
|
else
|
|
ifp->if_hwassist &= ~BCE_IF_HWASSIST;
|
|
}
|
|
|
|
/* Toggle the RX checksum capabilities enable flag. */
|
|
if (mask & IFCAP_RXCSUM &&
|
|
ifp->if_capabilities & IFCAP_RXCSUM)
|
|
ifp->if_capenable ^= IFCAP_RXCSUM;
|
|
|
|
/* Toggle the TSO capabilities enable flag. */
|
|
if (bce_tso_enable && (mask & IFCAP_TSO4) &&
|
|
ifp->if_capabilities & IFCAP_TSO4) {
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
if (IFCAP_TSO4 & ifp->if_capenable)
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
else
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
}
|
|
|
|
if (mask & IFCAP_VLAN_HWCSUM &&
|
|
ifp->if_capabilities & IFCAP_VLAN_HWCSUM)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWCSUM;
|
|
|
|
if ((mask & IFCAP_VLAN_HWTSO) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_VLAN_HWTSO) != 0)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTSO;
|
|
/*
|
|
* Don't actually disable VLAN tag stripping as
|
|
* management firmware (ASF/IPMI/UMP) requires the
|
|
* feature. If VLAN tag stripping is disabled driver
|
|
* will manually reconstruct the VLAN frame by
|
|
* appending stripped VLAN tag.
|
|
*/
|
|
if ((mask & IFCAP_VLAN_HWTAGGING) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_VLAN_HWTAGGING)) {
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
|
|
== 0)
|
|
ifp->if_capenable &= ~IFCAP_VLAN_HWTSO;
|
|
}
|
|
VLAN_CAPABILITIES(ifp);
|
|
break;
|
|
default:
|
|
/* We don't know how to handle the IOCTL, pass it on. */
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_MISC);
|
|
return(error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Transmit timeout handler. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_watchdog(struct bce_softc *sc)
|
|
{
|
|
DBENTER(BCE_EXTREME_SEND);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* If the watchdog timer hasn't expired then just exit. */
|
|
if (sc->watchdog_timer == 0 || --sc->watchdog_timer)
|
|
goto bce_watchdog_exit;
|
|
|
|
/* If pause frames are active then don't reset the hardware. */
|
|
/* ToDo: Should we reset the timer here? */
|
|
if (REG_RD(sc, BCE_EMAC_TX_STATUS) & BCE_EMAC_TX_STATUS_XOFFED)
|
|
goto bce_watchdog_exit;
|
|
|
|
BCE_PRINTF("%s(%d): Watchdog timeout occurred, resetting!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
DBRUNMSG(BCE_INFO,
|
|
bce_dump_driver_state(sc);
|
|
bce_dump_status_block(sc);
|
|
bce_dump_stats_block(sc);
|
|
bce_dump_ftqs(sc);
|
|
bce_dump_txp_state(sc, 0);
|
|
bce_dump_rxp_state(sc, 0);
|
|
bce_dump_tpat_state(sc, 0);
|
|
bce_dump_cp_state(sc, 0);
|
|
bce_dump_com_state(sc, 0));
|
|
|
|
DBRUN(bce_breakpoint(sc));
|
|
|
|
sc->bce_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
|
|
bce_init_locked(sc);
|
|
sc->bce_ifp->if_oerrors++;
|
|
|
|
bce_watchdog_exit:
|
|
DBEXIT(BCE_EXTREME_SEND);
|
|
}
|
|
|
|
|
|
/*
|
|
* Interrupt handler.
|
|
*/
|
|
/****************************************************************************/
|
|
/* Main interrupt entry point. Verifies that the controller generated the */
|
|
/* interrupt and then calls a separate routine for handle the various */
|
|
/* interrupt causes (PHY, TX, RX). */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_intr(void *xsc)
|
|
{
|
|
struct bce_softc *sc;
|
|
struct ifnet *ifp;
|
|
u32 status_attn_bits;
|
|
u16 hw_rx_cons, hw_tx_cons;
|
|
|
|
sc = xsc;
|
|
ifp = sc->bce_ifp;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND | BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
DBRUNMSG(BCE_VERBOSE_INTR, bce_dump_status_block(sc));
|
|
DBRUNMSG(BCE_VERBOSE_INTR, bce_dump_stats_block(sc));
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
DBRUN(sc->interrupts_generated++);
|
|
|
|
/* Synchnorize before we read from interface's status block */
|
|
bus_dmamap_sync(sc->status_tag, sc->status_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
/*
|
|
* If the hardware status block index
|
|
* matches the last value read by the
|
|
* driver and we haven't asserted our
|
|
* interrupt then there's nothing to do.
|
|
*/
|
|
if ((sc->status_block->status_idx == sc->last_status_idx) &&
|
|
(REG_RD(sc, BCE_PCICFG_MISC_STATUS) &
|
|
BCE_PCICFG_MISC_STATUS_INTA_VALUE)) {
|
|
DBPRINT(sc, BCE_VERBOSE_INTR, "%s(): Spurious interrupt.\n",
|
|
__FUNCTION__);
|
|
goto bce_intr_exit;
|
|
}
|
|
|
|
/* Ack the interrupt and stop others from occuring. */
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
|
|
BCE_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
|
|
BCE_PCICFG_INT_ACK_CMD_MASK_INT);
|
|
|
|
/* Check if the hardware has finished any work. */
|
|
hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
|
|
/* Keep processing data as long as there is work to do. */
|
|
for (;;) {
|
|
|
|
status_attn_bits = sc->status_block->status_attn_bits;
|
|
|
|
DBRUNIF(DB_RANDOMTRUE(unexpected_attention_sim_control),
|
|
BCE_PRINTF("Simulating unexpected status attention "
|
|
"bit set.");
|
|
sc->unexpected_attention_sim_count++;
|
|
status_attn_bits = status_attn_bits |
|
|
STATUS_ATTN_BITS_PARITY_ERROR);
|
|
|
|
/* Was it a link change interrupt? */
|
|
if ((status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) !=
|
|
(sc->status_block->status_attn_bits_ack &
|
|
STATUS_ATTN_BITS_LINK_STATE)) {
|
|
bce_phy_intr(sc);
|
|
|
|
/* Clear transient updates during link state change. */
|
|
REG_WR(sc, BCE_HC_COMMAND, sc->hc_command |
|
|
BCE_HC_COMMAND_COAL_NOW_WO_INT);
|
|
REG_RD(sc, BCE_HC_COMMAND);
|
|
}
|
|
|
|
/* If any other attention is asserted, the chip is toast. */
|
|
if (((status_attn_bits & ~STATUS_ATTN_BITS_LINK_STATE) !=
|
|
(sc->status_block->status_attn_bits_ack &
|
|
~STATUS_ATTN_BITS_LINK_STATE))) {
|
|
|
|
sc->unexpected_attention_count++;
|
|
|
|
BCE_PRINTF("%s(%d): Fatal attention detected: "
|
|
"0x%08X\n", __FILE__, __LINE__,
|
|
sc->status_block->status_attn_bits);
|
|
|
|
DBRUNMSG(BCE_FATAL,
|
|
if (unexpected_attention_sim_control == 0)
|
|
bce_breakpoint(sc));
|
|
|
|
bce_init_locked(sc);
|
|
goto bce_intr_exit;
|
|
}
|
|
|
|
/* Check for any completed RX frames. */
|
|
if (hw_rx_cons != sc->hw_rx_cons)
|
|
bce_rx_intr(sc);
|
|
|
|
/* Check for any completed TX frames. */
|
|
if (hw_tx_cons != sc->hw_tx_cons)
|
|
bce_tx_intr(sc);
|
|
|
|
/* Save status block index value for the next interrupt. */
|
|
sc->last_status_idx = sc->status_block->status_idx;
|
|
|
|
/*
|
|
* Prevent speculative reads from getting
|
|
* ahead of the status block.
|
|
*/
|
|
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
|
|
BUS_SPACE_BARRIER_READ);
|
|
|
|
/*
|
|
* If there's no work left then exit the
|
|
* interrupt service routine.
|
|
*/
|
|
hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
|
|
if ((hw_rx_cons == sc->hw_rx_cons) &&
|
|
(hw_tx_cons == sc->hw_tx_cons))
|
|
break;
|
|
|
|
}
|
|
|
|
bus_dmamap_sync(sc->status_tag, sc->status_map,
|
|
BUS_DMASYNC_PREREAD);
|
|
|
|
/* Re-enable interrupts. */
|
|
bce_enable_intr(sc, 0);
|
|
|
|
/* Handle any frames that arrived while handling the interrupt. */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
|
|
!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
bce_start_locked(ifp);
|
|
|
|
bce_intr_exit:
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_SEND | BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Programs the various packet receive modes (broadcast and multicast). */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_set_rx_mode(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
u32 hashes[NUM_MC_HASH_REGISTERS] = { 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
u32 rx_mode, sort_mode;
|
|
int h, i;
|
|
|
|
DBENTER(BCE_VERBOSE_MISC);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Initialize receive mode default settings. */
|
|
rx_mode = sc->rx_mode & ~(BCE_EMAC_RX_MODE_PROMISCUOUS |
|
|
BCE_EMAC_RX_MODE_KEEP_VLAN_TAG);
|
|
sort_mode = 1 | BCE_RPM_SORT_USER0_BC_EN;
|
|
|
|
/*
|
|
* ASF/IPMI/UMP firmware requires that VLAN tag stripping
|
|
* be enbled.
|
|
*/
|
|
if (!(BCE_IF_CAPABILITIES & IFCAP_VLAN_HWTAGGING) &&
|
|
(!(sc->bce_flags & BCE_MFW_ENABLE_FLAG)))
|
|
rx_mode |= BCE_EMAC_RX_MODE_KEEP_VLAN_TAG;
|
|
|
|
/*
|
|
* Check for promiscuous, all multicast, or selected
|
|
* multicast address filtering.
|
|
*/
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
DBPRINT(sc, BCE_INFO_MISC, "Enabling promiscuous mode.\n");
|
|
|
|
/* Enable promiscuous mode. */
|
|
rx_mode |= BCE_EMAC_RX_MODE_PROMISCUOUS;
|
|
sort_mode |= BCE_RPM_SORT_USER0_PROM_EN;
|
|
} else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
DBPRINT(sc, BCE_INFO_MISC, "Enabling all multicast mode.\n");
|
|
|
|
/* Enable all multicast addresses. */
|
|
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
|
|
REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), 0xffffffff);
|
|
}
|
|
sort_mode |= BCE_RPM_SORT_USER0_MC_EN;
|
|
} else {
|
|
/* Accept one or more multicast(s). */
|
|
DBPRINT(sc, BCE_INFO_MISC, "Enabling selective multicast mode.\n");
|
|
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = ether_crc32_le(LLADDR((struct sockaddr_dl *)
|
|
ifma->ifma_addr), ETHER_ADDR_LEN) & 0xFF;
|
|
hashes[(h & 0xE0) >> 5] |= 1 << (h & 0x1F);
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
|
|
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++)
|
|
REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), hashes[i]);
|
|
|
|
sort_mode |= BCE_RPM_SORT_USER0_MC_HSH_EN;
|
|
}
|
|
|
|
/* Only make changes if the recive mode has actually changed. */
|
|
if (rx_mode != sc->rx_mode) {
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "Enabling new receive mode: "
|
|
"0x%08X\n", rx_mode);
|
|
|
|
sc->rx_mode = rx_mode;
|
|
REG_WR(sc, BCE_EMAC_RX_MODE, rx_mode);
|
|
}
|
|
|
|
/* Disable and clear the exisitng sort before enabling a new sort. */
|
|
REG_WR(sc, BCE_RPM_SORT_USER0, 0x0);
|
|
REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode);
|
|
REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode | BCE_RPM_SORT_USER0_ENA);
|
|
|
|
DBEXIT(BCE_VERBOSE_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Called periodically to updates statistics from the controllers */
|
|
/* statistics block. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_stats_update(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct statistics_block *stats;
|
|
|
|
DBENTER(BCE_EXTREME_MISC);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
stats = (struct statistics_block *) sc->stats_block;
|
|
|
|
/*
|
|
* Certain controllers don't report
|
|
* carrier sense errors correctly.
|
|
* See errata E11_5708CA0_1165.
|
|
*/
|
|
if (!(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) &&
|
|
!(BCE_CHIP_ID(sc) == BCE_CHIP_ID_5708_A0))
|
|
ifp->if_oerrors +=
|
|
(u_long) stats->stat_Dot3StatsCarrierSenseErrors;
|
|
|
|
/*
|
|
* Update the sysctl statistics from the
|
|
* hardware statistics.
|
|
*/
|
|
sc->stat_IfHCInOctets =
|
|
((u64) stats->stat_IfHCInOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCInOctets_lo;
|
|
|
|
sc->stat_IfHCInBadOctets =
|
|
((u64) stats->stat_IfHCInBadOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCInBadOctets_lo;
|
|
|
|
sc->stat_IfHCOutOctets =
|
|
((u64) stats->stat_IfHCOutOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCOutOctets_lo;
|
|
|
|
sc->stat_IfHCOutBadOctets =
|
|
((u64) stats->stat_IfHCOutBadOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCOutBadOctets_lo;
|
|
|
|
sc->stat_IfHCInUcastPkts =
|
|
((u64) stats->stat_IfHCInUcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCInUcastPkts_lo;
|
|
|
|
sc->stat_IfHCInMulticastPkts =
|
|
((u64) stats->stat_IfHCInMulticastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCInMulticastPkts_lo;
|
|
|
|
sc->stat_IfHCInBroadcastPkts =
|
|
((u64) stats->stat_IfHCInBroadcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCInBroadcastPkts_lo;
|
|
|
|
sc->stat_IfHCOutUcastPkts =
|
|
((u64) stats->stat_IfHCOutUcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCOutUcastPkts_lo;
|
|
|
|
sc->stat_IfHCOutMulticastPkts =
|
|
((u64) stats->stat_IfHCOutMulticastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCOutMulticastPkts_lo;
|
|
|
|
sc->stat_IfHCOutBroadcastPkts =
|
|
((u64) stats->stat_IfHCOutBroadcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCOutBroadcastPkts_lo;
|
|
|
|
/* ToDo: Preserve counters beyond 32 bits? */
|
|
/* ToDo: Read the statistics from auto-clear regs? */
|
|
|
|
sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors =
|
|
stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors;
|
|
|
|
sc->stat_Dot3StatsCarrierSenseErrors =
|
|
stats->stat_Dot3StatsCarrierSenseErrors;
|
|
|
|
sc->stat_Dot3StatsFCSErrors =
|
|
stats->stat_Dot3StatsFCSErrors;
|
|
|
|
sc->stat_Dot3StatsAlignmentErrors =
|
|
stats->stat_Dot3StatsAlignmentErrors;
|
|
|
|
sc->stat_Dot3StatsSingleCollisionFrames =
|
|
stats->stat_Dot3StatsSingleCollisionFrames;
|
|
|
|
sc->stat_Dot3StatsMultipleCollisionFrames =
|
|
stats->stat_Dot3StatsMultipleCollisionFrames;
|
|
|
|
sc->stat_Dot3StatsDeferredTransmissions =
|
|
stats->stat_Dot3StatsDeferredTransmissions;
|
|
|
|
sc->stat_Dot3StatsExcessiveCollisions =
|
|
stats->stat_Dot3StatsExcessiveCollisions;
|
|
|
|
sc->stat_Dot3StatsLateCollisions =
|
|
stats->stat_Dot3StatsLateCollisions;
|
|
|
|
sc->stat_EtherStatsCollisions =
|
|
stats->stat_EtherStatsCollisions;
|
|
|
|
sc->stat_EtherStatsFragments =
|
|
stats->stat_EtherStatsFragments;
|
|
|
|
sc->stat_EtherStatsJabbers =
|
|
stats->stat_EtherStatsJabbers;
|
|
|
|
sc->stat_EtherStatsUndersizePkts =
|
|
stats->stat_EtherStatsUndersizePkts;
|
|
|
|
sc->stat_EtherStatsOversizePkts =
|
|
stats->stat_EtherStatsOversizePkts;
|
|
|
|
sc->stat_EtherStatsPktsRx64Octets =
|
|
stats->stat_EtherStatsPktsRx64Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx65Octetsto127Octets =
|
|
stats->stat_EtherStatsPktsRx65Octetsto127Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx128Octetsto255Octets =
|
|
stats->stat_EtherStatsPktsRx128Octetsto255Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx256Octetsto511Octets =
|
|
stats->stat_EtherStatsPktsRx256Octetsto511Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx512Octetsto1023Octets =
|
|
stats->stat_EtherStatsPktsRx512Octetsto1023Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx1024Octetsto1522Octets =
|
|
stats->stat_EtherStatsPktsRx1024Octetsto1522Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx1523Octetsto9022Octets =
|
|
stats->stat_EtherStatsPktsRx1523Octetsto9022Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx64Octets =
|
|
stats->stat_EtherStatsPktsTx64Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx65Octetsto127Octets =
|
|
stats->stat_EtherStatsPktsTx65Octetsto127Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx128Octetsto255Octets =
|
|
stats->stat_EtherStatsPktsTx128Octetsto255Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx256Octetsto511Octets =
|
|
stats->stat_EtherStatsPktsTx256Octetsto511Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx512Octetsto1023Octets =
|
|
stats->stat_EtherStatsPktsTx512Octetsto1023Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx1024Octetsto1522Octets =
|
|
stats->stat_EtherStatsPktsTx1024Octetsto1522Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx1523Octetsto9022Octets =
|
|
stats->stat_EtherStatsPktsTx1523Octetsto9022Octets;
|
|
|
|
sc->stat_XonPauseFramesReceived =
|
|
stats->stat_XonPauseFramesReceived;
|
|
|
|
sc->stat_XoffPauseFramesReceived =
|
|
stats->stat_XoffPauseFramesReceived;
|
|
|
|
sc->stat_OutXonSent =
|
|
stats->stat_OutXonSent;
|
|
|
|
sc->stat_OutXoffSent =
|
|
stats->stat_OutXoffSent;
|
|
|
|
sc->stat_FlowControlDone =
|
|
stats->stat_FlowControlDone;
|
|
|
|
sc->stat_MacControlFramesReceived =
|
|
stats->stat_MacControlFramesReceived;
|
|
|
|
sc->stat_XoffStateEntered =
|
|
stats->stat_XoffStateEntered;
|
|
|
|
sc->stat_IfInFramesL2FilterDiscards =
|
|
stats->stat_IfInFramesL2FilterDiscards;
|
|
|
|
sc->stat_IfInRuleCheckerDiscards =
|
|
stats->stat_IfInRuleCheckerDiscards;
|
|
|
|
sc->stat_IfInFTQDiscards =
|
|
stats->stat_IfInFTQDiscards;
|
|
|
|
sc->stat_IfInMBUFDiscards =
|
|
stats->stat_IfInMBUFDiscards;
|
|
|
|
sc->stat_IfInRuleCheckerP4Hit =
|
|
stats->stat_IfInRuleCheckerP4Hit;
|
|
|
|
sc->stat_CatchupInRuleCheckerDiscards =
|
|
stats->stat_CatchupInRuleCheckerDiscards;
|
|
|
|
sc->stat_CatchupInFTQDiscards =
|
|
stats->stat_CatchupInFTQDiscards;
|
|
|
|
sc->stat_CatchupInMBUFDiscards =
|
|
stats->stat_CatchupInMBUFDiscards;
|
|
|
|
sc->stat_CatchupInRuleCheckerP4Hit =
|
|
stats->stat_CatchupInRuleCheckerP4Hit;
|
|
|
|
sc->com_no_buffers = REG_RD_IND(sc, 0x120084);
|
|
|
|
/*
|
|
* Update the interface statistics from the
|
|
* hardware statistics.
|
|
*/
|
|
ifp->if_collisions =
|
|
(u_long) sc->stat_EtherStatsCollisions;
|
|
|
|
/* ToDo: This method loses soft errors. */
|
|
ifp->if_ierrors =
|
|
(u_long) sc->stat_EtherStatsUndersizePkts +
|
|
(u_long) sc->stat_EtherStatsOversizePkts +
|
|
(u_long) sc->stat_IfInMBUFDiscards +
|
|
(u_long) sc->stat_Dot3StatsAlignmentErrors +
|
|
(u_long) sc->stat_Dot3StatsFCSErrors +
|
|
(u_long) sc->stat_IfInRuleCheckerDiscards +
|
|
(u_long) sc->stat_IfInFTQDiscards +
|
|
(u_long) sc->com_no_buffers;
|
|
|
|
/* ToDo: This method loses soft errors. */
|
|
ifp->if_oerrors =
|
|
(u_long) sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors +
|
|
(u_long) sc->stat_Dot3StatsExcessiveCollisions +
|
|
(u_long) sc->stat_Dot3StatsLateCollisions;
|
|
|
|
/* ToDo: Add additional statistics? */
|
|
|
|
DBEXIT(BCE_EXTREME_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Periodic function to notify the bootcode that the driver is still */
|
|
/* present. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_pulse(void *xsc)
|
|
{
|
|
struct bce_softc *sc = xsc;
|
|
u32 msg;
|
|
|
|
DBENTER(BCE_EXTREME_MISC);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Tell the firmware that the driver is still running. */
|
|
msg = (u32) ++sc->bce_fw_drv_pulse_wr_seq;
|
|
bce_shmem_wr(sc, BCE_DRV_PULSE_MB, msg);
|
|
|
|
/* Update the bootcode condition. */
|
|
sc->bc_state = bce_shmem_rd(sc, BCE_BC_STATE_CONDITION);
|
|
|
|
/* Report whether the bootcode still knows the driver is running. */
|
|
if (bce_verbose || bootverbose) {
|
|
if (sc->bce_drv_cardiac_arrest == FALSE) {
|
|
if (!(sc->bc_state & BCE_CONDITION_DRV_PRESENT)) {
|
|
sc->bce_drv_cardiac_arrest = TRUE;
|
|
BCE_PRINTF("%s(): Warning: bootcode "
|
|
"thinks driver is absent! "
|
|
"(bc_state = 0x%08X)\n",
|
|
__FUNCTION__, sc->bc_state);
|
|
}
|
|
} else {
|
|
/*
|
|
* Not supported by all bootcode versions.
|
|
* (v5.0.11+ and v5.2.1+) Older bootcode
|
|
* will require the driver to reset the
|
|
* controller to clear this condition.
|
|
*/
|
|
if (sc->bc_state & BCE_CONDITION_DRV_PRESENT) {
|
|
sc->bce_drv_cardiac_arrest = FALSE;
|
|
BCE_PRINTF("%s(): Bootcode found the "
|
|
"driver pulse! (bc_state = 0x%08X)\n",
|
|
__FUNCTION__, sc->bc_state);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* Schedule the next pulse. */
|
|
callout_reset(&sc->bce_pulse_callout, hz, bce_pulse, sc);
|
|
|
|
DBEXIT(BCE_EXTREME_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Periodic function to perform maintenance tasks. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_tick(void *xsc)
|
|
{
|
|
struct bce_softc *sc = xsc;
|
|
struct mii_data *mii;
|
|
struct ifnet *ifp;
|
|
struct ifmediareq ifmr;
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
DBENTER(BCE_EXTREME_MISC);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Schedule the next tick. */
|
|
callout_reset(&sc->bce_tick_callout, hz, bce_tick, sc);
|
|
|
|
/* Update the statistics from the hardware statistics block. */
|
|
bce_stats_update(sc);
|
|
|
|
/*
|
|
* ToDo: This is a safety measure. Need to re-evaluate
|
|
* high level processing logic and eliminate this code.
|
|
*/
|
|
/* Top off the receive and page chains. */
|
|
if (bce_hdr_split == TRUE)
|
|
bce_fill_pg_chain(sc);
|
|
bce_fill_rx_chain(sc);
|
|
|
|
/* Check that chip hasn't hung. */
|
|
bce_watchdog(sc);
|
|
|
|
/* If link is up already up then we're done. */
|
|
if (sc->bce_link_up == TRUE)
|
|
goto bce_tick_exit;
|
|
|
|
/* Link is down. Check what the PHY's doing. */
|
|
if ((sc->bce_phy_flags & BCE_PHY_REMOTE_CAP_FLAG) != 0) {
|
|
bzero(&ifmr, sizeof(ifmr));
|
|
bce_ifmedia_sts_rphy(sc, &ifmr);
|
|
if ((ifmr.ifm_status & (IFM_ACTIVE | IFM_AVALID)) ==
|
|
(IFM_ACTIVE | IFM_AVALID)) {
|
|
sc->bce_link_up = TRUE;
|
|
bce_miibus_statchg(sc->bce_dev);
|
|
}
|
|
} else {
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
mii_tick(mii);
|
|
/* Check if the link has come up. */
|
|
if ((mii->mii_media_status & IFM_ACTIVE) &&
|
|
(IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)) {
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "%s(): Link up!\n",
|
|
__FUNCTION__);
|
|
sc->bce_link_up = TRUE;
|
|
if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
|
|
IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX ||
|
|
IFM_SUBTYPE(mii->mii_media_active) == IFM_2500_SX) &&
|
|
(bce_verbose || bootverbose))
|
|
BCE_PRINTF("Gigabit link up!\n");
|
|
}
|
|
|
|
}
|
|
if (sc->bce_link_up == TRUE) {
|
|
/* Now that link is up, handle any outstanding TX traffic. */
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "%s(): Found "
|
|
"pending TX traffic.\n", __FUNCTION__);
|
|
bce_start_locked(ifp);
|
|
}
|
|
}
|
|
|
|
bce_tick_exit:
|
|
DBEXIT(BCE_EXTREME_MISC);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
bce_fw_cap_init(struct bce_softc *sc)
|
|
{
|
|
u32 ack, cap, link;
|
|
|
|
ack = 0;
|
|
cap = bce_shmem_rd(sc, BCE_FW_CAP_MB);
|
|
if ((cap & BCE_FW_CAP_SIGNATURE_MAGIC_MASK) !=
|
|
BCE_FW_CAP_SIGNATURE_MAGIC)
|
|
return;
|
|
if ((cap & (BCE_FW_CAP_MFW_KEEP_VLAN | BCE_FW_CAP_BC_KEEP_VLAN)) ==
|
|
(BCE_FW_CAP_MFW_KEEP_VLAN | BCE_FW_CAP_BC_KEEP_VLAN))
|
|
ack |= BCE_DRV_ACK_CAP_SIGNATURE_MAGIC |
|
|
BCE_FW_CAP_MFW_KEEP_VLAN | BCE_FW_CAP_BC_KEEP_VLAN;
|
|
if ((sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) != 0 &&
|
|
(cap & BCE_FW_CAP_REMOTE_PHY_CAP) != 0) {
|
|
sc->bce_phy_flags &= ~BCE_PHY_REMOTE_PORT_FIBER_FLAG;
|
|
sc->bce_phy_flags |= BCE_PHY_REMOTE_CAP_FLAG;
|
|
link = bce_shmem_rd(sc, BCE_LINK_STATUS);
|
|
if ((link & BCE_LINK_STATUS_SERDES_LINK) != 0)
|
|
sc->bce_phy_flags |= BCE_PHY_REMOTE_PORT_FIBER_FLAG;
|
|
ack |= BCE_DRV_ACK_CAP_SIGNATURE_MAGIC |
|
|
BCE_FW_CAP_REMOTE_PHY_CAP;
|
|
}
|
|
|
|
if (ack != 0)
|
|
bce_shmem_wr(sc, BCE_DRV_ACK_CAP_MB, ack);
|
|
}
|
|
|
|
|
|
#ifdef BCE_DEBUG
|
|
/****************************************************************************/
|
|
/* Allows the driver state to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_driver_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_driver_state(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the hardware state to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_hw_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_hw_state(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the status block to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_status_block(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_status_block(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the stats block to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_stats_block(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_stats_block(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the stat counters to be cleared without unloading/reloading the */
|
|
/* driver. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_stats_clear(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
struct statistics_block *stats;
|
|
|
|
stats = (struct statistics_block *) sc->stats_block;
|
|
bzero(stats, sizeof(struct statistics_block));
|
|
|
|
/* Clear the internal H/W statistics counters. */
|
|
REG_WR(sc, BCE_HC_COMMAND, BCE_HC_COMMAND_CLR_STAT_NOW);
|
|
|
|
/* Reset the driver maintained statistics. */
|
|
sc->interrupts_rx =
|
|
sc->interrupts_tx = 0;
|
|
sc->tso_frames_requested =
|
|
sc->tso_frames_completed =
|
|
sc->tso_frames_failed = 0;
|
|
sc->rx_empty_count =
|
|
sc->tx_full_count = 0;
|
|
sc->rx_low_watermark = USABLE_RX_BD_ALLOC;
|
|
sc->tx_hi_watermark = 0;
|
|
sc->l2fhdr_error_count =
|
|
sc->l2fhdr_error_sim_count = 0;
|
|
sc->mbuf_alloc_failed_count =
|
|
sc->mbuf_alloc_failed_sim_count = 0;
|
|
sc->dma_map_addr_rx_failed_count =
|
|
sc->dma_map_addr_tx_failed_count = 0;
|
|
sc->mbuf_frag_count = 0;
|
|
sc->csum_offload_tcp_udp =
|
|
sc->csum_offload_ip = 0;
|
|
sc->vlan_tagged_frames_rcvd =
|
|
sc->vlan_tagged_frames_stripped = 0;
|
|
sc->split_header_frames_rcvd =
|
|
sc->split_header_tcp_frames_rcvd = 0;
|
|
|
|
/* Clear firmware maintained statistics. */
|
|
REG_WR_IND(sc, 0x120084, 0);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the shared memory contents to be dumped through the sysctl . */
|
|
/* interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_shmem_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_shmem_state(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the bootcode state to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_bc_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_bc_state(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow dumping the RX BD chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_rx_bd_chain(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_rx_bd_chain(sc, 0, TOTAL_RX_BD_ALLOC);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow dumping the RX MBUF chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_rx_mbuf_chain(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_rx_mbuf_chain(sc, 0, USABLE_RX_BD_ALLOC);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow dumping the TX chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_tx_chain(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_tx_chain(sc, 0, TOTAL_TX_BD_ALLOC);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow dumping the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_pg_chain(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_pg_chain(sc, 0, TOTAL_PG_BD_ALLOC);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading arbitrary NVRAM offsets in */
|
|
/* the device. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_nvram_read(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc = (struct bce_softc *)arg1;
|
|
int error;
|
|
u32 result;
|
|
u32 val[1];
|
|
u8 *data = (u8 *) val;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
error = bce_nvram_read(sc, result, data, 4);
|
|
|
|
BCE_PRINTF("offset 0x%08X = 0x%08X\n", result, bce_be32toh(val[0]));
|
|
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading arbitrary registers in the */
|
|
/* device. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_reg_read(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc = (struct bce_softc *)arg1;
|
|
int error;
|
|
u32 val, result;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Make sure the register is accessible. */
|
|
if (result < 0x8000) {
|
|
val = REG_RD(sc, result);
|
|
BCE_PRINTF("reg 0x%08X = 0x%08X\n", result, val);
|
|
} else if (result < 0x0280000) {
|
|
val = REG_RD_IND(sc, result);
|
|
BCE_PRINTF("reg 0x%08X = 0x%08X\n", result, val);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading arbitrary PHY registers in */
|
|
/* the device. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_phy_read(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc;
|
|
device_t dev;
|
|
int error, result;
|
|
u16 val;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Make sure the register is accessible. */
|
|
if (result < 0x20) {
|
|
sc = (struct bce_softc *)arg1;
|
|
dev = sc->bce_dev;
|
|
val = bce_miibus_read_reg(dev, sc->bce_phy_addr, result);
|
|
BCE_PRINTF("phy 0x%02X = 0x%04X\n", result, val);
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface for dumping the nvram contents. */
|
|
/* DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive errno for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_nvram_dump(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc = (struct bce_softc *)arg1;
|
|
int error, i;
|
|
|
|
if (sc->nvram_buf == NULL)
|
|
sc->nvram_buf = malloc(sc->bce_flash_size,
|
|
M_TEMP, M_ZERO | M_WAITOK);
|
|
|
|
error = 0;
|
|
if (req->oldlen == sc->bce_flash_size) {
|
|
for (i = 0; i < sc->bce_flash_size && error == 0; i++)
|
|
error = bce_nvram_read(sc, i, &sc->nvram_buf[i], 1);
|
|
}
|
|
|
|
if (error == 0)
|
|
error = SYSCTL_OUT(req, sc->nvram_buf, sc->bce_flash_size);
|
|
|
|
return error;
|
|
}
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface for writing to nvram. */
|
|
/* DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive errno for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_nvram_write(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc = (struct bce_softc *)arg1;
|
|
int error;
|
|
|
|
if (sc->nvram_buf == NULL)
|
|
sc->nvram_buf = malloc(sc->bce_flash_size,
|
|
M_TEMP, M_ZERO | M_WAITOK);
|
|
else
|
|
bzero(sc->nvram_buf, sc->bce_flash_size);
|
|
|
|
error = SYSCTL_IN(req, sc->nvram_buf, sc->bce_flash_size);
|
|
if (error == 0)
|
|
return (error);
|
|
|
|
if (req->newlen == sc->bce_flash_size)
|
|
error = bce_nvram_write(sc, 0, sc->nvram_buf,
|
|
sc->bce_flash_size);
|
|
|
|
|
|
return error;
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading a CID. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_ctx(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc;
|
|
int error, result;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Make sure the register is accessible. */
|
|
if (result <= TX_CID) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_ctx(sc, result);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to forcing the driver to dump state and */
|
|
/* enter the debugger. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_breakpoint(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_breakpoint(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* Adds any sysctl parameters for tuning or debugging purposes. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_add_sysctls(struct bce_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *children;
|
|
|
|
DBENTER(BCE_VERBOSE_MISC);
|
|
|
|
ctx = device_get_sysctl_ctx(sc->bce_dev);
|
|
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bce_dev));
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"l2fhdr_error_sim_control",
|
|
CTLFLAG_RW, &l2fhdr_error_sim_control,
|
|
0, "Debug control to force l2fhdr errors");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"l2fhdr_error_sim_count",
|
|
CTLFLAG_RD, &sc->l2fhdr_error_sim_count,
|
|
0, "Number of simulated l2_fhdr errors");
|
|
#endif
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"l2fhdr_error_count",
|
|
CTLFLAG_RD, &sc->l2fhdr_error_count,
|
|
0, "Number of l2_fhdr errors");
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"mbuf_alloc_failed_sim_control",
|
|
CTLFLAG_RW, &mbuf_alloc_failed_sim_control,
|
|
0, "Debug control to force mbuf allocation failures");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"mbuf_alloc_failed_sim_count",
|
|
CTLFLAG_RD, &sc->mbuf_alloc_failed_sim_count,
|
|
0, "Number of simulated mbuf cluster allocation failures");
|
|
#endif
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"mbuf_alloc_failed_count",
|
|
CTLFLAG_RD, &sc->mbuf_alloc_failed_count,
|
|
0, "Number of mbuf allocation failures");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"mbuf_frag_count",
|
|
CTLFLAG_RD, &sc->mbuf_frag_count,
|
|
0, "Number of fragmented mbufs");
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"dma_map_addr_failed_sim_control",
|
|
CTLFLAG_RW, &dma_map_addr_failed_sim_control,
|
|
0, "Debug control to force DMA mapping failures");
|
|
|
|
/* ToDo: Figure out how to update this value in bce_dma_map_addr(). */
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"dma_map_addr_failed_sim_count",
|
|
CTLFLAG_RD, &sc->dma_map_addr_failed_sim_count,
|
|
0, "Number of simulated DMA mapping failures");
|
|
|
|
#endif
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"dma_map_addr_rx_failed_count",
|
|
CTLFLAG_RD, &sc->dma_map_addr_rx_failed_count,
|
|
0, "Number of RX DMA mapping failures");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"dma_map_addr_tx_failed_count",
|
|
CTLFLAG_RD, &sc->dma_map_addr_tx_failed_count,
|
|
0, "Number of TX DMA mapping failures");
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"unexpected_attention_sim_control",
|
|
CTLFLAG_RW, &unexpected_attention_sim_control,
|
|
0, "Debug control to simulate unexpected attentions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"unexpected_attention_sim_count",
|
|
CTLFLAG_RW, &sc->unexpected_attention_sim_count,
|
|
0, "Number of simulated unexpected attentions");
|
|
#endif
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"unexpected_attention_count",
|
|
CTLFLAG_RW, &sc->unexpected_attention_count,
|
|
0, "Number of unexpected attentions");
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"debug_bootcode_running_failure",
|
|
CTLFLAG_RW, &bootcode_running_failure_sim_control,
|
|
0, "Debug control to force bootcode running failures");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"rx_low_watermark",
|
|
CTLFLAG_RD, &sc->rx_low_watermark,
|
|
0, "Lowest level of free rx_bd's");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"rx_empty_count",
|
|
CTLFLAG_RD, &sc->rx_empty_count,
|
|
"Number of times the RX chain was empty");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_hi_watermark",
|
|
CTLFLAG_RD, &sc->tx_hi_watermark,
|
|
0, "Highest level of used tx_bd's");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"tx_full_count",
|
|
CTLFLAG_RD, &sc->tx_full_count,
|
|
"Number of times the TX chain was full");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"tso_frames_requested",
|
|
CTLFLAG_RD, &sc->tso_frames_requested,
|
|
"Number of TSO frames requested");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"tso_frames_completed",
|
|
CTLFLAG_RD, &sc->tso_frames_completed,
|
|
"Number of TSO frames completed");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"tso_frames_failed",
|
|
CTLFLAG_RD, &sc->tso_frames_failed,
|
|
"Number of TSO frames failed");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"csum_offload_ip",
|
|
CTLFLAG_RD, &sc->csum_offload_ip,
|
|
"Number of IP checksum offload frames");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"csum_offload_tcp_udp",
|
|
CTLFLAG_RD, &sc->csum_offload_tcp_udp,
|
|
"Number of TCP/UDP checksum offload frames");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"vlan_tagged_frames_rcvd",
|
|
CTLFLAG_RD, &sc->vlan_tagged_frames_rcvd,
|
|
"Number of VLAN tagged frames received");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"vlan_tagged_frames_stripped",
|
|
CTLFLAG_RD, &sc->vlan_tagged_frames_stripped,
|
|
"Number of VLAN tagged frames stripped");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"interrupts_rx",
|
|
CTLFLAG_RD, &sc->interrupts_rx,
|
|
"Number of RX interrupts");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"interrupts_tx",
|
|
CTLFLAG_RD, &sc->interrupts_tx,
|
|
"Number of TX interrupts");
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"split_header_frames_rcvd",
|
|
CTLFLAG_RD, &sc->split_header_frames_rcvd,
|
|
"Number of split header frames received");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"split_header_tcp_frames_rcvd",
|
|
CTLFLAG_RD, &sc->split_header_tcp_frames_rcvd,
|
|
"Number of split header TCP frames received");
|
|
}
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"nvram_dump", CTLTYPE_OPAQUE | CTLFLAG_RD,
|
|
(void *)sc, 0,
|
|
bce_sysctl_nvram_dump, "S", "");
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"nvram_write", CTLTYPE_OPAQUE | CTLFLAG_WR,
|
|
(void *)sc, 0,
|
|
bce_sysctl_nvram_write, "S", "");
|
|
#endif
|
|
#endif /* BCE_DEBUG */
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHcInOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCInOctets,
|
|
"Bytes received");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCInBadOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCInBadOctets,
|
|
"Bad bytes received");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutOctets,
|
|
"Bytes sent");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutBadOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutBadOctets,
|
|
"Bad bytes sent");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCInUcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCInUcastPkts,
|
|
"Unicast packets received");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCInMulticastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCInMulticastPkts,
|
|
"Multicast packets received");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCInBroadcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCInBroadcastPkts,
|
|
"Broadcast packets received");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutUcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutUcastPkts,
|
|
"Unicast packets sent");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutMulticastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutMulticastPkts,
|
|
"Multicast packets sent");
|
|
|
|
SYSCTL_ADD_QUAD(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutBroadcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutBroadcastPkts,
|
|
"Broadcast packets sent");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_emac_tx_stat_dot3statsinternalmactransmiterrors",
|
|
CTLFLAG_RD, &sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors,
|
|
0, "Internal MAC transmit errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsCarrierSenseErrors",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsCarrierSenseErrors,
|
|
0, "Carrier sense errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsFCSErrors",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsFCSErrors,
|
|
0, "Frame check sequence errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsAlignmentErrors",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsAlignmentErrors,
|
|
0, "Alignment errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsSingleCollisionFrames",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsSingleCollisionFrames,
|
|
0, "Single Collision Frames");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsMultipleCollisionFrames",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsMultipleCollisionFrames,
|
|
0, "Multiple Collision Frames");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsDeferredTransmissions",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsDeferredTransmissions,
|
|
0, "Deferred Transmissions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsExcessiveCollisions",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsExcessiveCollisions,
|
|
0, "Excessive Collisions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsLateCollisions",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsLateCollisions,
|
|
0, "Late Collisions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsCollisions",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsCollisions,
|
|
0, "Collisions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsFragments",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsFragments,
|
|
0, "Fragments");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsJabbers",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsJabbers,
|
|
0, "Jabbers");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsUndersizePkts",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsUndersizePkts,
|
|
0, "Undersize packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsOversizePkts",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsOversizePkts,
|
|
0, "stat_EtherStatsOversizePkts");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx64Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx64Octets,
|
|
0, "Bytes received in 64 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx65Octetsto127Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx65Octetsto127Octets,
|
|
0, "Bytes received in 65 to 127 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx128Octetsto255Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx128Octetsto255Octets,
|
|
0, "Bytes received in 128 to 255 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx256Octetsto511Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx256Octetsto511Octets,
|
|
0, "Bytes received in 256 to 511 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx512Octetsto1023Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx512Octetsto1023Octets,
|
|
0, "Bytes received in 512 to 1023 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx1024Octetsto1522Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1024Octetsto1522Octets,
|
|
0, "Bytes received in 1024 t0 1522 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx1523Octetsto9022Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1523Octetsto9022Octets,
|
|
0, "Bytes received in 1523 to 9022 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx64Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx64Octets,
|
|
0, "Bytes sent in 64 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx65Octetsto127Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx65Octetsto127Octets,
|
|
0, "Bytes sent in 65 to 127 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx128Octetsto255Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx128Octetsto255Octets,
|
|
0, "Bytes sent in 128 to 255 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx256Octetsto511Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx256Octetsto511Octets,
|
|
0, "Bytes sent in 256 to 511 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx512Octetsto1023Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx512Octetsto1023Octets,
|
|
0, "Bytes sent in 512 to 1023 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx1024Octetsto1522Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1024Octetsto1522Octets,
|
|
0, "Bytes sent in 1024 to 1522 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx1523Octetsto9022Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1523Octetsto9022Octets,
|
|
0, "Bytes sent in 1523 to 9022 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_XonPauseFramesReceived",
|
|
CTLFLAG_RD, &sc->stat_XonPauseFramesReceived,
|
|
0, "XON pause frames receved");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_XoffPauseFramesReceived",
|
|
CTLFLAG_RD, &sc->stat_XoffPauseFramesReceived,
|
|
0, "XOFF pause frames received");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_OutXonSent",
|
|
CTLFLAG_RD, &sc->stat_OutXonSent,
|
|
0, "XON pause frames sent");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_OutXoffSent",
|
|
CTLFLAG_RD, &sc->stat_OutXoffSent,
|
|
0, "XOFF pause frames sent");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_FlowControlDone",
|
|
CTLFLAG_RD, &sc->stat_FlowControlDone,
|
|
0, "Flow control done");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_MacControlFramesReceived",
|
|
CTLFLAG_RD, &sc->stat_MacControlFramesReceived,
|
|
0, "MAC control frames received");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_XoffStateEntered",
|
|
CTLFLAG_RD, &sc->stat_XoffStateEntered,
|
|
0, "XOFF state entered");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInFramesL2FilterDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInFramesL2FilterDiscards,
|
|
0, "Received L2 packets discarded");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInRuleCheckerDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInRuleCheckerDiscards,
|
|
0, "Received packets discarded by rule");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInFTQDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInFTQDiscards,
|
|
0, "Received packet FTQ discards");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInMBUFDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInMBUFDiscards,
|
|
0, "Received packets discarded due to lack "
|
|
"of controller buffer memory");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInRuleCheckerP4Hit",
|
|
CTLFLAG_RD, &sc->stat_IfInRuleCheckerP4Hit,
|
|
0, "Received packets rule checker hits");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInRuleCheckerDiscards",
|
|
CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerDiscards,
|
|
0, "Received packets discarded in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInFTQDiscards",
|
|
CTLFLAG_RD, &sc->stat_CatchupInFTQDiscards,
|
|
0, "Received packets discarded in FTQ in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInMBUFDiscards",
|
|
CTLFLAG_RD, &sc->stat_CatchupInMBUFDiscards,
|
|
0, "Received packets discarded in controller "
|
|
"buffer memory in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInRuleCheckerP4Hit",
|
|
CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerP4Hit,
|
|
0, "Received packets rule checker hits in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"com_no_buffers",
|
|
CTLFLAG_RD, &sc->com_no_buffers,
|
|
0, "Valid packets received but no RX buffers available");
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"driver_state", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_driver_state, "I", "Drive state information");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"hw_state", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_hw_state, "I", "Hardware state information");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"status_block", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_status_block, "I", "Dump status block");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"stats_block", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_stats_block, "I", "Dump statistics block");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"stats_clear", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_stats_clear, "I", "Clear statistics block");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"shmem_state", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_shmem_state, "I", "Shared memory state information");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"bc_state", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_bc_state, "I", "Bootcode state information");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_rx_bd_chain", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_rx_bd_chain, "I", "Dump RX BD chain");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_rx_mbuf_chain", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_rx_mbuf_chain, "I", "Dump RX MBUF chain");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_tx_chain", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_tx_chain, "I", "Dump tx_bd chain");
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_pg_chain", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_pg_chain, "I", "Dump page chain");
|
|
}
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_ctx", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_ctx, "I", "Dump context memory");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"breakpoint", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_breakpoint, "I", "Driver breakpoint");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"reg_read", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_reg_read, "I", "Register read");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"nvram_read", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_nvram_read, "I", "NVRAM read");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"phy_read", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_phy_read, "I", "PHY register read");
|
|
|
|
#endif
|
|
|
|
DBEXIT(BCE_VERBOSE_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* BCE Debug Routines */
|
|
/****************************************************************************/
|
|
#ifdef BCE_DEBUG
|
|
|
|
/****************************************************************************/
|
|
/* Freezes the controller to allow for a cohesive state dump. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_freeze_controller(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
val = REG_RD(sc, BCE_MISC_COMMAND);
|
|
val |= BCE_MISC_COMMAND_DISABLE_ALL;
|
|
REG_WR(sc, BCE_MISC_COMMAND, val);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Unfreezes the controller after a freeze operation. This may not always */
|
|
/* work and the controller will require a reset! */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_unfreeze_controller(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
val = REG_RD(sc, BCE_MISC_COMMAND);
|
|
val |= BCE_MISC_COMMAND_ENABLE_ALL;
|
|
REG_WR(sc, BCE_MISC_COMMAND, val);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out Ethernet frame information from an mbuf. */
|
|
/* */
|
|
/* Partially decode an Ethernet frame to look at some important headers. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_enet(struct bce_softc *sc, struct mbuf *m)
|
|
{
|
|
struct ether_vlan_header *eh;
|
|
u16 etype;
|
|
int ehlen;
|
|
struct ip *ip;
|
|
struct tcphdr *th;
|
|
struct udphdr *uh;
|
|
struct arphdr *ah;
|
|
|
|
BCE_PRINTF(
|
|
"-----------------------------"
|
|
" Frame Decode "
|
|
"-----------------------------\n");
|
|
|
|
eh = mtod(m, struct ether_vlan_header *);
|
|
|
|
/* Handle VLAN encapsulation if present. */
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
etype = ntohs(eh->evl_proto);
|
|
ehlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
} else {
|
|
etype = ntohs(eh->evl_encap_proto);
|
|
ehlen = ETHER_HDR_LEN;
|
|
}
|
|
|
|
/* ToDo: Add VLAN output. */
|
|
BCE_PRINTF("enet: dest = %6D, src = %6D, type = 0x%04X, hlen = %d\n",
|
|
eh->evl_dhost, ":", eh->evl_shost, ":", etype, ehlen);
|
|
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *)(m->m_data + ehlen);
|
|
BCE_PRINTF("--ip: dest = 0x%08X , src = 0x%08X, "
|
|
"len = %d bytes, protocol = 0x%02X, xsum = 0x%04X\n",
|
|
ntohl(ip->ip_dst.s_addr), ntohl(ip->ip_src.s_addr),
|
|
ntohs(ip->ip_len), ip->ip_p, ntohs(ip->ip_sum));
|
|
|
|
switch (ip->ip_p) {
|
|
case IPPROTO_TCP:
|
|
th = (struct tcphdr *)((caddr_t)ip + (ip->ip_hl << 2));
|
|
BCE_PRINTF("-tcp: dest = %d, src = %d, hlen = "
|
|
"%d bytes, flags = 0x%b, csum = 0x%04X\n",
|
|
ntohs(th->th_dport), ntohs(th->th_sport),
|
|
(th->th_off << 2), th->th_flags,
|
|
"\20\10CWR\07ECE\06URG\05ACK\04PSH\03RST"
|
|
"\02SYN\01FIN", ntohs(th->th_sum));
|
|
break;
|
|
case IPPROTO_UDP:
|
|
uh = (struct udphdr *)((caddr_t)ip + (ip->ip_hl << 2));
|
|
BCE_PRINTF("-udp: dest = %d, src = %d, len = %d "
|
|
"bytes, csum = 0x%04X\n", ntohs(uh->uh_dport),
|
|
ntohs(uh->uh_sport), ntohs(uh->uh_ulen),
|
|
ntohs(uh->uh_sum));
|
|
break;
|
|
case IPPROTO_ICMP:
|
|
BCE_PRINTF("icmp:\n");
|
|
break;
|
|
default:
|
|
BCE_PRINTF("----: Other IP protocol.\n");
|
|
}
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
BCE_PRINTF("ipv6: No decode supported.\n");
|
|
break;
|
|
case ETHERTYPE_ARP:
|
|
BCE_PRINTF("-arp: ");
|
|
ah = (struct arphdr *) (m->m_data + ehlen);
|
|
switch (ntohs(ah->ar_op)) {
|
|
case ARPOP_REVREQUEST:
|
|
printf("reverse ARP request\n");
|
|
break;
|
|
case ARPOP_REVREPLY:
|
|
printf("reverse ARP reply\n");
|
|
break;
|
|
case ARPOP_REQUEST:
|
|
printf("ARP request\n");
|
|
break;
|
|
case ARPOP_REPLY:
|
|
printf("ARP reply\n");
|
|
break;
|
|
default:
|
|
printf("other ARP operation\n");
|
|
}
|
|
break;
|
|
default:
|
|
BCE_PRINTF("----: Other protocol.\n");
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"-----------------------------"
|
|
"--------------"
|
|
"-----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out information about an mbuf. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_mbuf(struct bce_softc *sc, struct mbuf *m)
|
|
{
|
|
struct mbuf *mp = m;
|
|
|
|
if (m == NULL) {
|
|
BCE_PRINTF("mbuf: null pointer\n");
|
|
return;
|
|
}
|
|
|
|
while (mp) {
|
|
BCE_PRINTF("mbuf: %p, m_len = %d, m_flags = 0x%b, "
|
|
"m_data = %p\n", mp, mp->m_len, mp->m_flags,
|
|
"\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY", mp->m_data);
|
|
|
|
if (mp->m_flags & M_PKTHDR) {
|
|
BCE_PRINTF("- m_pkthdr: len = %d, flags = 0x%b, "
|
|
"csum_flags = %b\n", mp->m_pkthdr.len,
|
|
mp->m_flags, "\20\12M_BCAST\13M_MCAST\14M_FRAG"
|
|
"\15M_FIRSTFRAG\16M_LASTFRAG\21M_VLANTAG"
|
|
"\22M_PROMISC\23M_NOFREE",
|
|
mp->m_pkthdr.csum_flags,
|
|
"\20\1CSUM_IP\2CSUM_TCP\3CSUM_UDP\4CSUM_IP_FRAGS"
|
|
"\5CSUM_FRAGMENT\6CSUM_TSO\11CSUM_IP_CHECKED"
|
|
"\12CSUM_IP_VALID\13CSUM_DATA_VALID"
|
|
"\14CSUM_PSEUDO_HDR");
|
|
}
|
|
|
|
if (mp->m_flags & M_EXT) {
|
|
BCE_PRINTF("- m_ext: %p, ext_size = %d, type = ",
|
|
mp->m_ext.ext_buf, mp->m_ext.ext_size);
|
|
switch (mp->m_ext.ext_type) {
|
|
case EXT_CLUSTER:
|
|
printf("EXT_CLUSTER\n"); break;
|
|
case EXT_SFBUF:
|
|
printf("EXT_SFBUF\n"); break;
|
|
case EXT_JUMBO9:
|
|
printf("EXT_JUMBO9\n"); break;
|
|
case EXT_JUMBO16:
|
|
printf("EXT_JUMBO16\n"); break;
|
|
case EXT_PACKET:
|
|
printf("EXT_PACKET\n"); break;
|
|
case EXT_MBUF:
|
|
printf("EXT_MBUF\n"); break;
|
|
case EXT_NET_DRV:
|
|
printf("EXT_NET_DRV\n"); break;
|
|
case EXT_MOD_TYPE:
|
|
printf("EXT_MDD_TYPE\n"); break;
|
|
case EXT_DISPOSABLE:
|
|
printf("EXT_DISPOSABLE\n"); break;
|
|
case EXT_EXTREF:
|
|
printf("EXT_EXTREF\n"); break;
|
|
default:
|
|
printf("UNKNOWN\n");
|
|
}
|
|
}
|
|
|
|
mp = mp->m_next;
|
|
}
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the mbufs in the TX mbuf chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_tx_mbuf_chain(struct bce_softc *sc, u16 chain_prod, int count)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" tx mbuf data "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < count; i++) {
|
|
m = sc->tx_mbuf_ptr[chain_prod];
|
|
BCE_PRINTF("txmbuf[0x%04X]\n", chain_prod);
|
|
bce_dump_mbuf(sc, m);
|
|
chain_prod = TX_CHAIN_IDX(NEXT_TX_BD(chain_prod));
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the mbufs in the RX mbuf chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rx_mbuf_chain(struct bce_softc *sc, u16 chain_prod, int count)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" rx mbuf data "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < count; i++) {
|
|
m = sc->rx_mbuf_ptr[chain_prod];
|
|
BCE_PRINTF("rxmbuf[0x%04X]\n", chain_prod);
|
|
bce_dump_mbuf(sc, m);
|
|
chain_prod = RX_CHAIN_IDX(NEXT_RX_BD(chain_prod));
|
|
}
|
|
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the mbufs in the mbuf page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_pg_mbuf_chain(struct bce_softc *sc, u16 chain_prod, int count)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" pg mbuf data "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < count; i++) {
|
|
m = sc->pg_mbuf_ptr[chain_prod];
|
|
BCE_PRINTF("pgmbuf[0x%04X]\n", chain_prod);
|
|
bce_dump_mbuf(sc, m);
|
|
chain_prod = PG_CHAIN_IDX(NEXT_PG_BD(chain_prod));
|
|
}
|
|
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a tx_bd structure. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_txbd(struct bce_softc *sc, int idx, struct tx_bd *txbd)
|
|
{
|
|
int i = 0;
|
|
|
|
if (idx > MAX_TX_BD_ALLOC)
|
|
/* Index out of range. */
|
|
BCE_PRINTF("tx_bd[0x%04X]: Invalid tx_bd index!\n", idx);
|
|
else if ((idx & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
|
|
/* TX Chain page pointer. */
|
|
BCE_PRINTF("tx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page "
|
|
"pointer\n", idx, txbd->tx_bd_haddr_hi,
|
|
txbd->tx_bd_haddr_lo);
|
|
else {
|
|
/* Normal tx_bd entry. */
|
|
BCE_PRINTF("tx_bd[0x%04X]: haddr = 0x%08X:%08X, "
|
|
"mss_nbytes = 0x%08X, vlan tag = 0x%04X, flags = "
|
|
"0x%04X (", idx, txbd->tx_bd_haddr_hi,
|
|
txbd->tx_bd_haddr_lo, txbd->tx_bd_mss_nbytes,
|
|
txbd->tx_bd_vlan_tag, txbd->tx_bd_flags);
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_CONN_FAULT) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("CONN_FAULT");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_TCP_UDP_CKSUM) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("TCP_UDP_CKSUM");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_IP_CKSUM) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("IP_CKSUM");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_VLAN_TAG) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("VLAN");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_COAL_NOW) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("COAL_NOW");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_DONT_GEN_CRC) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("DONT_GEN_CRC");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_START) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("START");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_END) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("END");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_LSO) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("LSO");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_OPTION_WORD) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("SW_OPTION=%d", ((txbd->tx_bd_flags &
|
|
TX_BD_FLAGS_SW_OPTION_WORD) >> 8)); i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_FLAGS) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("SW_FLAGS");
|
|
i++;
|
|
}
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_SNAP) {
|
|
if (i>0)
|
|
printf("|");
|
|
printf("SNAP)");
|
|
} else {
|
|
printf(")\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a rx_bd structure. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rxbd(struct bce_softc *sc, int idx, struct rx_bd *rxbd)
|
|
{
|
|
if (idx > MAX_RX_BD_ALLOC)
|
|
/* Index out of range. */
|
|
BCE_PRINTF("rx_bd[0x%04X]: Invalid rx_bd index!\n", idx);
|
|
else if ((idx & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
|
|
/* RX Chain page pointer. */
|
|
BCE_PRINTF("rx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page "
|
|
"pointer\n", idx, rxbd->rx_bd_haddr_hi,
|
|
rxbd->rx_bd_haddr_lo);
|
|
else
|
|
/* Normal rx_bd entry. */
|
|
BCE_PRINTF("rx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = "
|
|
"0x%08X, flags = 0x%08X\n", idx, rxbd->rx_bd_haddr_hi,
|
|
rxbd->rx_bd_haddr_lo, rxbd->rx_bd_len,
|
|
rxbd->rx_bd_flags);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a rx_bd structure in the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_pgbd(struct bce_softc *sc, int idx, struct rx_bd *pgbd)
|
|
{
|
|
if (idx > MAX_PG_BD_ALLOC)
|
|
/* Index out of range. */
|
|
BCE_PRINTF("pg_bd[0x%04X]: Invalid pg_bd index!\n", idx);
|
|
else if ((idx & USABLE_PG_BD_PER_PAGE) == USABLE_PG_BD_PER_PAGE)
|
|
/* Page Chain page pointer. */
|
|
BCE_PRINTF("px_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n",
|
|
idx, pgbd->rx_bd_haddr_hi, pgbd->rx_bd_haddr_lo);
|
|
else
|
|
/* Normal rx_bd entry. */
|
|
BCE_PRINTF("pg_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, "
|
|
"flags = 0x%08X\n", idx,
|
|
pgbd->rx_bd_haddr_hi, pgbd->rx_bd_haddr_lo,
|
|
pgbd->rx_bd_len, pgbd->rx_bd_flags);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a l2_fhdr structure. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_l2fhdr(struct bce_softc *sc, int idx, struct l2_fhdr *l2fhdr)
|
|
{
|
|
BCE_PRINTF("l2_fhdr[0x%04X]: status = 0x%b, "
|
|
"pkt_len = %d, vlan = 0x%04x, ip_xsum/hdr_len = 0x%04X, "
|
|
"tcp_udp_xsum = 0x%04X\n", idx,
|
|
l2fhdr->l2_fhdr_status, BCE_L2FHDR_PRINTFB,
|
|
l2fhdr->l2_fhdr_pkt_len, l2fhdr->l2_fhdr_vlan_tag,
|
|
l2fhdr->l2_fhdr_ip_xsum, l2fhdr->l2_fhdr_tcp_udp_xsum);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out context memory info. (Only useful for CID 0 to 16.) */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_ctx(struct bce_softc *sc, u16 cid)
|
|
{
|
|
if (cid > TX_CID) {
|
|
BCE_PRINTF(" Unknown CID\n");
|
|
return;
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" CTX Data "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(" 0x%04X - (CID) Context ID\n", cid);
|
|
|
|
if (cid == RX_CID) {
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_HOST_BDIDX) host rx "
|
|
"producer index\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_HOST_BDIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_HOST_BSEQ) host "
|
|
"byte sequence\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_RX_HOST_BSEQ));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BSEQ) h/w byte sequence\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_BSEQ));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BDHADDR_HI) h/w buffer "
|
|
"descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_BDHADDR_HI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BDHADDR_LO) h/w buffer "
|
|
"descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_BDHADDR_LO));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BDIDX) h/w rx consumer "
|
|
"index\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_RX_NX_BDIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_HOST_PG_BDIDX) host page "
|
|
"producer index\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_RX_HOST_PG_BDIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_PG_BUF_SIZE) host rx_bd/page "
|
|
"buffer size\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_RX_PG_BUF_SIZE));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_PG_BDHADDR_HI) h/w page "
|
|
"chain address\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_RX_NX_PG_BDHADDR_HI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_PG_BDHADDR_LO) h/w page "
|
|
"chain address\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_RX_NX_PG_BDHADDR_LO));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_PG_BDIDX) h/w page "
|
|
"consumer index\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_RX_NX_PG_BDIDX));
|
|
} else if (cid == TX_CID) {
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TYPE_XI) ctx type\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_TYPE_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_CMD_TX_TYPE_XI) ctx "
|
|
"cmd\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_CMD_TYPE_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BDHADDR_HI_XI) "
|
|
"h/w buffer descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_HI_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BHADDR_LO_XI) "
|
|
"h/w buffer descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_LO_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BIDX_XI) "
|
|
"host producer index\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BIDX_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BSEQ_XI) "
|
|
"host byte sequence\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BSEQ_XI));
|
|
} else {
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TYPE) ctx type\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_TX_TYPE));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_CMD_TYPE) ctx cmd\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_CMD_TYPE));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BDHADDR_HI) "
|
|
"h/w buffer descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_HI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BHADDR_LO) "
|
|
"h/w buffer descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_LO));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BIDX) host "
|
|
"producer index\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BSEQ) host byte "
|
|
"sequence\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BSEQ));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Raw CTX "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0x0; i < 0x300; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n", i,
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i),
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i + 0x4),
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i + 0x8),
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i + 0xc));
|
|
}
|
|
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the FTQ data. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_ftqs(struct bce_softc *sc)
|
|
{
|
|
u32 cmd, ctl, cur_depth, max_depth, valid_cnt, val;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" FTQ Data "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(" FTQ Command Control Depth_Now "
|
|
"Max_Depth Valid_Cnt \n");
|
|
BCE_PRINTF(" ------- ---------- ---------- ---------- "
|
|
"---------- ----------\n");
|
|
|
|
/* Setup the generic statistic counters for the FTQ valid count. */
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PPQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPCQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUPQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_0, val);
|
|
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCHQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMAQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PTQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PMQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_1, val);
|
|
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPATQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMAQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXPQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDRQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_2, val);
|
|
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMTQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMXQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TASQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_3, val);
|
|
|
|
/* Input queue to the Receive Lookup state machine */
|
|
cmd = REG_RD(sc, BCE_RLUP_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RLUP_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_RLUP_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RLUP_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT0);
|
|
BCE_PRINTF(" RLUP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive Processor */
|
|
cmd = REG_RD_IND(sc, BCE_RXP_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_RXP_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_RXP_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RXP_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT1);
|
|
BCE_PRINTF(" RXP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Recevie Processor */
|
|
cmd = REG_RD_IND(sc, BCE_RXP_CFTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_RXP_CFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RXP_CFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RXP_CFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT2);
|
|
BCE_PRINTF(" RXPC 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive Virtual to Physical state machine */
|
|
cmd = REG_RD(sc, BCE_RV2P_PFTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2P_PFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RV2P_PFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RV2P_PFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT3);
|
|
BCE_PRINTF(" RV2PP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Recevie Virtual to Physical state machine */
|
|
cmd = REG_RD(sc, BCE_RV2P_MFTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2P_MFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RV2P_MFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RV2P_MFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT4);
|
|
BCE_PRINTF(" RV2PM 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive Virtual to Physical state machine */
|
|
cmd = REG_RD(sc, BCE_RV2P_TFTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2P_TFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RV2P_TFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RV2P_TFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT5);
|
|
BCE_PRINTF(" RV2PT 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive DMA state machine */
|
|
cmd = REG_RD(sc, BCE_RDMA_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RDMA_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_RDMA_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RDMA_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT6);
|
|
BCE_PRINTF(" RDMA 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Scheduler state machine */
|
|
cmd = REG_RD(sc, BCE_TSCH_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_TSCH_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TSCH_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TSCH_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT7);
|
|
BCE_PRINTF(" TSCH 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Buffer Descriptor state machine */
|
|
cmd = REG_RD(sc, BCE_TBDR_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_TBDR_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TBDR_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TBDR_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT8);
|
|
BCE_PRINTF(" TBDR 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Processor */
|
|
cmd = REG_RD_IND(sc, BCE_TXP_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_TXP_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TXP_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TXP_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT9);
|
|
BCE_PRINTF(" TXP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit DMA state machine */
|
|
cmd = REG_RD(sc, BCE_TDMA_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_TDMA_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TDMA_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TDMA_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT10);
|
|
BCE_PRINTF(" TDMA 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Patch-Up Processor */
|
|
cmd = REG_RD_IND(sc, BCE_TPAT_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_TPAT_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TPAT_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TPAT_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT11);
|
|
BCE_PRINTF(" TPAT 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Assembler state machine */
|
|
cmd = REG_RD_IND(sc, BCE_TAS_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_TAS_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TAS_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TAS_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT12);
|
|
BCE_PRINTF(" TAS 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Processor */
|
|
cmd = REG_RD_IND(sc, BCE_COM_COMXQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_COM_COMXQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_COM_COMXQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_COM_COMXQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT13);
|
|
BCE_PRINTF(" COMX 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Processor */
|
|
cmd = REG_RD_IND(sc, BCE_COM_COMTQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_COM_COMTQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_COM_COMTQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_COM_COMTQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT14);
|
|
BCE_PRINTF(" COMT 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Processor */
|
|
cmd = REG_RD_IND(sc, BCE_COM_COMQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_COM_COMQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_COM_COMQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_COM_COMQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT15);
|
|
BCE_PRINTF(" COMX 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Setup the generic statistic counters for the FTQ valid count. */
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_CPQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_MGMQ_VALID_CNT);
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709)
|
|
val = val |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PCSQ_VALID_CNT_XI <<
|
|
24);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_0, val);
|
|
|
|
/* Input queue to the Management Control Processor */
|
|
cmd = REG_RD_IND(sc, BCE_MCP_MCPQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_MCP_MCPQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_MCP_MCPQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_MCP_MCPQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT0);
|
|
BCE_PRINTF(" MCP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Command Processor */
|
|
cmd = REG_RD_IND(sc, BCE_CP_CPQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_CP_CPQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_CP_CPQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_CP_CPQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT1);
|
|
BCE_PRINTF(" CP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Scheduler state machine */
|
|
cmd = REG_RD(sc, BCE_CSCH_CH_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_CSCH_CH_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_CSCH_CH_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_CSCH_CH_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT2);
|
|
BCE_PRINTF(" CS 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
/* Input queue to the RV2P Command Scheduler */
|
|
cmd = REG_RD(sc, BCE_RV2PCSR_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2PCSR_FTQ_CTL);
|
|
cur_depth = (ctl & 0xFFC00000) >> 22;
|
|
max_depth = (ctl & 0x003FF000) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT3);
|
|
BCE_PRINTF(" RV2PCSR 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the TX chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_tx_chain(struct bce_softc *sc, u16 tx_prod, int count)
|
|
{
|
|
struct tx_bd *txbd;
|
|
|
|
/* First some info about the tx_bd chain structure. */
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" tx_bd chain "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("page size = 0x%08X, tx chain pages = 0x%08X\n",
|
|
(u32) BCM_PAGE_SIZE, (u32) sc->tx_pages);
|
|
BCE_PRINTF("tx_bd per page = 0x%08X, usable tx_bd per page = 0x%08X\n",
|
|
(u32) TOTAL_TX_BD_PER_PAGE, (u32) USABLE_TX_BD_PER_PAGE);
|
|
BCE_PRINTF("total tx_bd = 0x%08X\n", (u32) TOTAL_TX_BD_ALLOC);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" tx_bd data "
|
|
"----------------------------\n");
|
|
|
|
/* Now print out a decoded list of TX buffer descriptors. */
|
|
for (int i = 0; i < count; i++) {
|
|
txbd = &sc->tx_bd_chain[TX_PAGE(tx_prod)][TX_IDX(tx_prod)];
|
|
bce_dump_txbd(sc, tx_prod, txbd);
|
|
tx_prod++;
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the RX chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rx_bd_chain(struct bce_softc *sc, u16 rx_prod, int count)
|
|
{
|
|
struct rx_bd *rxbd;
|
|
|
|
/* First some info about the rx_bd chain structure. */
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" rx_bd chain "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("page size = 0x%08X, rx chain pages = 0x%08X\n",
|
|
(u32) BCM_PAGE_SIZE, (u32) sc->rx_pages);
|
|
|
|
BCE_PRINTF("rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n",
|
|
(u32) TOTAL_RX_BD_PER_PAGE, (u32) USABLE_RX_BD_PER_PAGE);
|
|
|
|
BCE_PRINTF("total rx_bd = 0x%08X\n", (u32) TOTAL_RX_BD_ALLOC);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" rx_bd data "
|
|
"----------------------------\n");
|
|
|
|
/* Now print out the rx_bd's themselves. */
|
|
for (int i = 0; i < count; i++) {
|
|
rxbd = &sc->rx_bd_chain[RX_PAGE(rx_prod)][RX_IDX(rx_prod)];
|
|
bce_dump_rxbd(sc, rx_prod, rxbd);
|
|
rx_prod = RX_CHAIN_IDX(rx_prod + 1);
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_pg_chain(struct bce_softc *sc, u16 pg_prod, int count)
|
|
{
|
|
struct rx_bd *pgbd;
|
|
|
|
/* First some info about the page chain structure. */
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" page chain "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("page size = 0x%08X, pg chain pages = 0x%08X\n",
|
|
(u32) BCM_PAGE_SIZE, (u32) sc->pg_pages);
|
|
|
|
BCE_PRINTF("rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n",
|
|
(u32) TOTAL_PG_BD_PER_PAGE, (u32) USABLE_PG_BD_PER_PAGE);
|
|
|
|
BCE_PRINTF("total pg_bd = 0x%08X\n", (u32) TOTAL_PG_BD_ALLOC);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" page data "
|
|
"----------------------------\n");
|
|
|
|
/* Now print out the rx_bd's themselves. */
|
|
for (int i = 0; i < count; i++) {
|
|
pgbd = &sc->pg_bd_chain[PG_PAGE(pg_prod)][PG_IDX(pg_prod)];
|
|
bce_dump_pgbd(sc, pg_prod, pgbd);
|
|
pg_prod = PG_CHAIN_IDX(pg_prod + 1);
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
#define BCE_PRINT_RX_CONS(arg) \
|
|
if (sblk->status_rx_quick_consumer_index##arg) \
|
|
BCE_PRINTF("0x%04X(0x%04X) - rx_quick_consumer_index%d\n", \
|
|
sblk->status_rx_quick_consumer_index##arg, (u16) \
|
|
RX_CHAIN_IDX(sblk->status_rx_quick_consumer_index##arg), \
|
|
arg);
|
|
|
|
|
|
#define BCE_PRINT_TX_CONS(arg) \
|
|
if (sblk->status_tx_quick_consumer_index##arg) \
|
|
BCE_PRINTF("0x%04X(0x%04X) - tx_quick_consumer_index%d\n", \
|
|
sblk->status_tx_quick_consumer_index##arg, (u16) \
|
|
TX_CHAIN_IDX(sblk->status_tx_quick_consumer_index##arg), \
|
|
arg);
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the status block from host memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_status_block(struct bce_softc *sc)
|
|
{
|
|
struct status_block *sblk;
|
|
|
|
sblk = sc->status_block;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Status Block "
|
|
"----------------------------\n");
|
|
|
|
/* Theses indices are used for normal L2 drivers. */
|
|
BCE_PRINTF(" 0x%08X - attn_bits\n",
|
|
sblk->status_attn_bits);
|
|
|
|
BCE_PRINTF(" 0x%08X - attn_bits_ack\n",
|
|
sblk->status_attn_bits_ack);
|
|
|
|
BCE_PRINT_RX_CONS(0);
|
|
BCE_PRINT_TX_CONS(0)
|
|
|
|
BCE_PRINTF(" 0x%04X - status_idx\n", sblk->status_idx);
|
|
|
|
/* Theses indices are not used for normal L2 drivers. */
|
|
BCE_PRINT_RX_CONS(1); BCE_PRINT_RX_CONS(2); BCE_PRINT_RX_CONS(3);
|
|
BCE_PRINT_RX_CONS(4); BCE_PRINT_RX_CONS(5); BCE_PRINT_RX_CONS(6);
|
|
BCE_PRINT_RX_CONS(7); BCE_PRINT_RX_CONS(8); BCE_PRINT_RX_CONS(9);
|
|
BCE_PRINT_RX_CONS(10); BCE_PRINT_RX_CONS(11); BCE_PRINT_RX_CONS(12);
|
|
BCE_PRINT_RX_CONS(13); BCE_PRINT_RX_CONS(14); BCE_PRINT_RX_CONS(15);
|
|
|
|
BCE_PRINT_TX_CONS(1); BCE_PRINT_TX_CONS(2); BCE_PRINT_TX_CONS(3);
|
|
|
|
if (sblk->status_completion_producer_index ||
|
|
sblk->status_cmd_consumer_index)
|
|
BCE_PRINTF("com_prod = 0x%08X, cmd_cons = 0x%08X\n",
|
|
sblk->status_completion_producer_index,
|
|
sblk->status_cmd_consumer_index);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
#define BCE_PRINT_64BIT_STAT(arg) \
|
|
if (sblk->arg##_lo || sblk->arg##_hi) \
|
|
BCE_PRINTF("0x%08X:%08X : %s\n", sblk->arg##_hi, \
|
|
sblk->arg##_lo, #arg);
|
|
|
|
#define BCE_PRINT_32BIT_STAT(arg) \
|
|
if (sblk->arg) \
|
|
BCE_PRINTF(" 0x%08X : %s\n", \
|
|
sblk->arg, #arg);
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the statistics block from host memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_stats_block(struct bce_softc *sc)
|
|
{
|
|
struct statistics_block *sblk;
|
|
|
|
sblk = sc->stats_block;
|
|
|
|
BCE_PRINTF(
|
|
"---------------"
|
|
" Stats Block (All Stats Not Shown Are 0) "
|
|
"---------------\n");
|
|
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCInOctets);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCInBadOctets);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCOutOctets);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCOutBadOctets);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCInUcastPkts);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCInBroadcastPkts);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCInMulticastPkts);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCOutUcastPkts);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCOutBroadcastPkts);
|
|
BCE_PRINT_64BIT_STAT(stat_IfHCOutMulticastPkts);
|
|
BCE_PRINT_32BIT_STAT(
|
|
stat_emac_tx_stat_dot3statsinternalmactransmiterrors);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsCarrierSenseErrors);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsFCSErrors);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsAlignmentErrors);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsSingleCollisionFrames);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsMultipleCollisionFrames);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsDeferredTransmissions);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsExcessiveCollisions);
|
|
BCE_PRINT_32BIT_STAT(stat_Dot3StatsLateCollisions);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsCollisions);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsFragments);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsJabbers);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsUndersizePkts);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsOversizePkts);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsRx64Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsRx65Octetsto127Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsRx128Octetsto255Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsRx256Octetsto511Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsRx512Octetsto1023Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsRx1024Octetsto1522Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsRx1523Octetsto9022Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsTx64Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsTx65Octetsto127Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsTx128Octetsto255Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsTx256Octetsto511Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsTx512Octetsto1023Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsTx1024Octetsto1522Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_EtherStatsPktsTx1523Octetsto9022Octets);
|
|
BCE_PRINT_32BIT_STAT(stat_XonPauseFramesReceived);
|
|
BCE_PRINT_32BIT_STAT(stat_XoffPauseFramesReceived);
|
|
BCE_PRINT_32BIT_STAT(stat_OutXonSent);
|
|
BCE_PRINT_32BIT_STAT(stat_OutXoffSent);
|
|
BCE_PRINT_32BIT_STAT(stat_FlowControlDone);
|
|
BCE_PRINT_32BIT_STAT(stat_MacControlFramesReceived);
|
|
BCE_PRINT_32BIT_STAT(stat_XoffStateEntered);
|
|
BCE_PRINT_32BIT_STAT(stat_IfInFramesL2FilterDiscards);
|
|
BCE_PRINT_32BIT_STAT(stat_IfInRuleCheckerDiscards);
|
|
BCE_PRINT_32BIT_STAT(stat_IfInFTQDiscards);
|
|
BCE_PRINT_32BIT_STAT(stat_IfInMBUFDiscards);
|
|
BCE_PRINT_32BIT_STAT(stat_IfInRuleCheckerP4Hit);
|
|
BCE_PRINT_32BIT_STAT(stat_CatchupInRuleCheckerDiscards);
|
|
BCE_PRINT_32BIT_STAT(stat_CatchupInFTQDiscards);
|
|
BCE_PRINT_32BIT_STAT(stat_CatchupInMBUFDiscards);
|
|
BCE_PRINT_32BIT_STAT(stat_CatchupInRuleCheckerP4Hit);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a summary of the driver state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_driver_state(struct bce_softc *sc)
|
|
{
|
|
u32 val_hi, val_lo;
|
|
|
|
BCE_PRINTF(
|
|
"-----------------------------"
|
|
" Driver State "
|
|
"-----------------------------\n");
|
|
|
|
val_hi = BCE_ADDR_HI(sc);
|
|
val_lo = BCE_ADDR_LO(sc);
|
|
BCE_PRINTF("0x%08X:%08X - (sc) driver softc structure virtual "
|
|
"address\n", val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->bce_vhandle);
|
|
val_lo = BCE_ADDR_LO(sc->bce_vhandle);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->bce_vhandle) PCI BAR virtual "
|
|
"address\n", val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->status_block);
|
|
val_lo = BCE_ADDR_LO(sc->status_block);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->status_block) status block "
|
|
"virtual address\n", val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->stats_block);
|
|
val_lo = BCE_ADDR_LO(sc->stats_block);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->stats_block) statistics block "
|
|
"virtual address\n", val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->tx_bd_chain);
|
|
val_lo = BCE_ADDR_LO(sc->tx_bd_chain);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->tx_bd_chain) tx_bd chain "
|
|
"virtual adddress\n", val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->rx_bd_chain);
|
|
val_lo = BCE_ADDR_LO(sc->rx_bd_chain);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->rx_bd_chain) rx_bd chain "
|
|
"virtual address\n", val_hi, val_lo);
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
val_hi = BCE_ADDR_HI(sc->pg_bd_chain);
|
|
val_lo = BCE_ADDR_LO(sc->pg_bd_chain);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->pg_bd_chain) page chain "
|
|
"virtual address\n", val_hi, val_lo);
|
|
}
|
|
|
|
val_hi = BCE_ADDR_HI(sc->tx_mbuf_ptr);
|
|
val_lo = BCE_ADDR_LO(sc->tx_mbuf_ptr);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->tx_mbuf_ptr) tx mbuf chain "
|
|
"virtual address\n", val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->rx_mbuf_ptr);
|
|
val_lo = BCE_ADDR_LO(sc->rx_mbuf_ptr);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->rx_mbuf_ptr) rx mbuf chain "
|
|
"virtual address\n", val_hi, val_lo);
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
val_hi = BCE_ADDR_HI(sc->pg_mbuf_ptr);
|
|
val_lo = BCE_ADDR_LO(sc->pg_mbuf_ptr);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->pg_mbuf_ptr) page mbuf chain "
|
|
"virtual address\n", val_hi, val_lo);
|
|
}
|
|
|
|
BCE_PRINTF(" 0x%016llX - (sc->interrupts_generated) "
|
|
"h/w intrs\n",
|
|
(long long unsigned int) sc->interrupts_generated);
|
|
|
|
BCE_PRINTF(" 0x%016llX - (sc->interrupts_rx) "
|
|
"rx interrupts handled\n",
|
|
(long long unsigned int) sc->interrupts_rx);
|
|
|
|
BCE_PRINTF(" 0x%016llX - (sc->interrupts_tx) "
|
|
"tx interrupts handled\n",
|
|
(long long unsigned int) sc->interrupts_tx);
|
|
|
|
BCE_PRINTF(" 0x%016llX - (sc->phy_interrupts) "
|
|
"phy interrupts handled\n",
|
|
(long long unsigned int) sc->phy_interrupts);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->last_status_idx) "
|
|
"status block index\n", sc->last_status_idx);
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->tx_prod) tx producer "
|
|
"index\n", sc->tx_prod, (u16) TX_CHAIN_IDX(sc->tx_prod));
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->tx_cons) tx consumer "
|
|
"index\n", sc->tx_cons, (u16) TX_CHAIN_IDX(sc->tx_cons));
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->tx_prod_bseq) tx producer "
|
|
"byte seq index\n", sc->tx_prod_bseq);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->debug_tx_mbuf_alloc) tx "
|
|
"mbufs allocated\n", sc->debug_tx_mbuf_alloc);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->used_tx_bd) used "
|
|
"tx_bd's\n", sc->used_tx_bd);
|
|
|
|
BCE_PRINTF(" 0x%04X/0x%04X - (sc->tx_hi_watermark)/"
|
|
"(sc->max_tx_bd)\n", sc->tx_hi_watermark, sc->max_tx_bd);
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->rx_prod) rx producer "
|
|
"index\n", sc->rx_prod, (u16) RX_CHAIN_IDX(sc->rx_prod));
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->rx_cons) rx consumer "
|
|
"index\n", sc->rx_cons, (u16) RX_CHAIN_IDX(sc->rx_cons));
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->rx_prod_bseq) rx producer "
|
|
"byte seq index\n", sc->rx_prod_bseq);
|
|
|
|
BCE_PRINTF(" 0x%04X/0x%04X - (sc->rx_low_watermark)/"
|
|
"(sc->max_rx_bd)\n", sc->rx_low_watermark, sc->max_rx_bd);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->debug_rx_mbuf_alloc) rx "
|
|
"mbufs allocated\n", sc->debug_rx_mbuf_alloc);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->free_rx_bd) free "
|
|
"rx_bd's\n", sc->free_rx_bd);
|
|
|
|
if (bce_hdr_split == TRUE) {
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->pg_prod) page producer "
|
|
"index\n", sc->pg_prod, (u16) PG_CHAIN_IDX(sc->pg_prod));
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->pg_cons) page consumer "
|
|
"index\n", sc->pg_cons, (u16) PG_CHAIN_IDX(sc->pg_cons));
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->debug_pg_mbuf_alloc) page "
|
|
"mbufs allocated\n", sc->debug_pg_mbuf_alloc);
|
|
}
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->free_pg_bd) free page "
|
|
"rx_bd's\n", sc->free_pg_bd);
|
|
|
|
BCE_PRINTF(" 0x%04X/0x%04X - (sc->pg_low_watermark)/"
|
|
"(sc->max_pg_bd)\n", sc->pg_low_watermark, sc->max_pg_bd);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->mbuf_alloc_failed_count) "
|
|
"mbuf alloc failures\n", sc->mbuf_alloc_failed_count);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->bce_flags) "
|
|
"bce mac flags\n", sc->bce_flags);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->bce_phy_flags) "
|
|
"bce phy flags\n", sc->bce_phy_flags);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the hardware state through a summary of important register, */
|
|
/* followed by a complete register dump. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_hw_state(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Hardware State "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("%s - bootcode version\n", sc->bce_bc_ver);
|
|
|
|
val = REG_RD(sc, BCE_MISC_ENABLE_STATUS_BITS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) misc_enable_status_bits\n",
|
|
val, BCE_MISC_ENABLE_STATUS_BITS);
|
|
|
|
val = REG_RD(sc, BCE_DMA_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) dma_status\n",
|
|
val, BCE_DMA_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_CTX_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) ctx_status\n",
|
|
val, BCE_CTX_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_EMAC_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) emac_status\n",
|
|
val, BCE_EMAC_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_RPM_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rpm_status\n",
|
|
val, BCE_RPM_STATUS);
|
|
|
|
/* ToDo: Create a #define for this constant. */
|
|
val = REG_RD(sc, 0x2004);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rlup_status\n",
|
|
val, 0x2004);
|
|
|
|
val = REG_RD(sc, BCE_RV2P_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rv2p_status\n",
|
|
val, BCE_RV2P_STATUS);
|
|
|
|
/* ToDo: Create a #define for this constant. */
|
|
val = REG_RD(sc, 0x2c04);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rdma_status\n",
|
|
val, 0x2c04);
|
|
|
|
val = REG_RD(sc, BCE_TBDR_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tbdr_status\n",
|
|
val, BCE_TBDR_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_TDMA_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tdma_status\n",
|
|
val, BCE_TDMA_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_HC_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) hc_status\n",
|
|
val, BCE_HC_STATUS);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_state\n",
|
|
val, BCE_TXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_state\n",
|
|
val, BCE_TPAT_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_state\n",
|
|
val, BCE_RXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_state\n",
|
|
val, BCE_COM_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_MCP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) mcp_cpu_state\n",
|
|
val, BCE_MCP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_state\n",
|
|
val, BCE_CP_CPU_STATE);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0x400; i < 0x8000; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD(sc, i), REG_RD(sc, i + 0x4),
|
|
REG_RD(sc, i + 0x8), REG_RD(sc, i + 0xC));
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the contentst of shared memory which is used for host driver */
|
|
/* to bootcode firmware communication. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_shmem_state(struct bce_softc *sc)
|
|
{
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Hardware State "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("0x%08X - Shared memory base address\n",
|
|
sc->bce_shmem_base);
|
|
BCE_PRINTF("%s - bootcode version\n",
|
|
sc->bce_bc_ver);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Shared Mem "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0x0; i < 0x200; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, bce_shmem_rd(sc, i), bce_shmem_rd(sc, i + 0x4),
|
|
bce_shmem_rd(sc, i + 0x8), bce_shmem_rd(sc, i + 0xC));
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the mailbox queue registers. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_mq_regs(struct bce_softc *sc)
|
|
{
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" MQ Regs "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0x3c00; i < 0x4000; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD(sc, i), REG_RD(sc, i + 0x4),
|
|
REG_RD(sc, i + 0x8), REG_RD(sc, i + 0xC));
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the bootcode state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_bc_state(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Bootcode State "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("%s - bootcode version\n", sc->bce_bc_ver);
|
|
|
|
val = bce_shmem_rd(sc, BCE_BC_RESET_TYPE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) reset_type\n",
|
|
val, BCE_BC_RESET_TYPE);
|
|
|
|
val = bce_shmem_rd(sc, BCE_BC_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) state\n",
|
|
val, BCE_BC_STATE);
|
|
|
|
val = bce_shmem_rd(sc, BCE_BC_STATE_CONDITION);
|
|
BCE_PRINTF("0x%08X - (0x%06X) condition\n",
|
|
val, BCE_BC_STATE_CONDITION);
|
|
|
|
val = bce_shmem_rd(sc, BCE_BC_STATE_DEBUG_CMD);
|
|
BCE_PRINTF("0x%08X - (0x%06X) debug_cmd\n",
|
|
val, BCE_BC_STATE_DEBUG_CMD);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the TXP processor state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_txp_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" TXP State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_TXP_SCRATCH + 0x10 + i * 4)));
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_mode\n",
|
|
val, BCE_TXP_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_state\n",
|
|
val, BCE_TXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_event_mask\n",
|
|
val, BCE_TXP_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_TXP_CPU_MODE; i < 0x68000; i += 0x10) {
|
|
/* Skip the big blank spaces */
|
|
if (i < 0x454000 && i > 0x5ffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X "
|
|
"0x%08X 0x%08X\n", i,
|
|
REG_RD_IND(sc, i),
|
|
REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8),
|
|
REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the RXP processor state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rxp_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" RXP State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_RXP_SCRATCH + 0x10 + i * 4)));
|
|
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_mode\n",
|
|
val, BCE_RXP_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_state\n",
|
|
val, BCE_RXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_event_mask\n",
|
|
val, BCE_RXP_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_RXP_CPU_MODE; i < 0xe8fff; i += 0x10) {
|
|
/* Skip the big blank sapces */
|
|
if (i < 0xc5400 && i > 0xdffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X "
|
|
"0x%08X 0x%08X\n", i,
|
|
REG_RD_IND(sc, i),
|
|
REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8),
|
|
REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the TPAT processor state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_tpat_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" TPAT State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_TPAT_SCRATCH + 0x410 + i * 4)));
|
|
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_mode\n",
|
|
val, BCE_TPAT_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_state\n",
|
|
val, BCE_TPAT_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_event_mask\n",
|
|
val, BCE_TPAT_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_TPAT_CPU_MODE; i < 0xa3fff; i += 0x10) {
|
|
/* Skip the big blank spaces */
|
|
if (i < 0x854000 && i > 0x9ffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X "
|
|
"0x%08X 0x%08X\n", i,
|
|
REG_RD_IND(sc, i),
|
|
REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8),
|
|
REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the Command Procesor (CP) state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_cp_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" CP State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_CP_SCRATCH + 0x10 + i * 4)));
|
|
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_mode\n",
|
|
val, BCE_CP_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_state\n",
|
|
val, BCE_CP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_event_mask\n", val,
|
|
BCE_CP_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_CP_CPU_MODE; i < 0x1aa000; i += 0x10) {
|
|
/* Skip the big blank spaces */
|
|
if (i < 0x185400 && i > 0x19ffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X "
|
|
"0x%08X 0x%08X\n", i,
|
|
REG_RD_IND(sc, i),
|
|
REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8),
|
|
REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the Completion Procesor (COM) state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_com_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[4];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" COM State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_COM_SCRATCH + 0x10 + i * 4)));
|
|
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_mode\n",
|
|
val, BCE_COM_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_state\n",
|
|
val, BCE_COM_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_event_mask\n", val,
|
|
BCE_COM_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_COM_CPU_MODE; i < 0x1053e8; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X "
|
|
"0x%08X 0x%08X\n", i,
|
|
REG_RD_IND(sc, i),
|
|
REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8),
|
|
REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the Receive Virtual 2 Physical (RV2P) state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rv2p_state(struct bce_softc *sc)
|
|
{
|
|
u32 val, pc1, pc2, fw_ver_high, fw_ver_low;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" RV2P State "
|
|
"----------------------------\n");
|
|
|
|
/* Stall the RV2P processors. */
|
|
val = REG_RD_IND(sc, BCE_RV2P_CONFIG);
|
|
val |= BCE_RV2P_CONFIG_STALL_PROC1 | BCE_RV2P_CONFIG_STALL_PROC2;
|
|
REG_WR_IND(sc, BCE_RV2P_CONFIG, val);
|
|
|
|
/* Read the firmware version. */
|
|
val = 0x00000001;
|
|
REG_WR_IND(sc, BCE_RV2P_PROC1_ADDR_CMD, val);
|
|
fw_ver_low = REG_RD_IND(sc, BCE_RV2P_INSTR_LOW);
|
|
fw_ver_high = REG_RD_IND(sc, BCE_RV2P_INSTR_HIGH) &
|
|
BCE_RV2P_INSTR_HIGH_HIGH;
|
|
BCE_PRINTF("RV2P1 Firmware version - 0x%08X:0x%08X\n",
|
|
fw_ver_high, fw_ver_low);
|
|
|
|
val = 0x00000001;
|
|
REG_WR_IND(sc, BCE_RV2P_PROC2_ADDR_CMD, val);
|
|
fw_ver_low = REG_RD_IND(sc, BCE_RV2P_INSTR_LOW);
|
|
fw_ver_high = REG_RD_IND(sc, BCE_RV2P_INSTR_HIGH) &
|
|
BCE_RV2P_INSTR_HIGH_HIGH;
|
|
BCE_PRINTF("RV2P2 Firmware version - 0x%08X:0x%08X\n",
|
|
fw_ver_high, fw_ver_low);
|
|
|
|
/* Resume the RV2P processors. */
|
|
val = REG_RD_IND(sc, BCE_RV2P_CONFIG);
|
|
val &= ~(BCE_RV2P_CONFIG_STALL_PROC1 | BCE_RV2P_CONFIG_STALL_PROC2);
|
|
REG_WR_IND(sc, BCE_RV2P_CONFIG, val);
|
|
|
|
/* Fetch the program counter value. */
|
|
val = 0x68007800;
|
|
REG_WR_IND(sc, BCE_RV2P_DEBUG_VECT_PEEK, val);
|
|
val = REG_RD_IND(sc, BCE_RV2P_DEBUG_VECT_PEEK);
|
|
pc1 = (val & BCE_RV2P_DEBUG_VECT_PEEK_1_VALUE);
|
|
pc2 = (val & BCE_RV2P_DEBUG_VECT_PEEK_2_VALUE) >> 16;
|
|
BCE_PRINTF("0x%08X - RV2P1 program counter (1st read)\n", pc1);
|
|
BCE_PRINTF("0x%08X - RV2P2 program counter (1st read)\n", pc2);
|
|
|
|
/* Fetch the program counter value again to see if it is advancing. */
|
|
val = 0x68007800;
|
|
REG_WR_IND(sc, BCE_RV2P_DEBUG_VECT_PEEK, val);
|
|
val = REG_RD_IND(sc, BCE_RV2P_DEBUG_VECT_PEEK);
|
|
pc1 = (val & BCE_RV2P_DEBUG_VECT_PEEK_1_VALUE);
|
|
pc2 = (val & BCE_RV2P_DEBUG_VECT_PEEK_2_VALUE) >> 16;
|
|
BCE_PRINTF("0x%08X - RV2P1 program counter (2nd read)\n", pc1);
|
|
BCE_PRINTF("0x%08X - RV2P2 program counter (2nd read)\n", pc2);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the driver state and then enters the debugger. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_breakpoint(struct bce_softc *sc)
|
|
{
|
|
|
|
/*
|
|
* Unreachable code to silence compiler warnings
|
|
* about unused functions.
|
|
*/
|
|
if (0) {
|
|
bce_freeze_controller(sc);
|
|
bce_unfreeze_controller(sc);
|
|
bce_dump_enet(sc, NULL);
|
|
bce_dump_txbd(sc, 0, NULL);
|
|
bce_dump_rxbd(sc, 0, NULL);
|
|
bce_dump_tx_mbuf_chain(sc, 0, USABLE_TX_BD_ALLOC);
|
|
bce_dump_rx_mbuf_chain(sc, 0, USABLE_RX_BD_ALLOC);
|
|
bce_dump_pg_mbuf_chain(sc, 0, USABLE_PG_BD_ALLOC);
|
|
bce_dump_l2fhdr(sc, 0, NULL);
|
|
bce_dump_ctx(sc, RX_CID);
|
|
bce_dump_ftqs(sc);
|
|
bce_dump_tx_chain(sc, 0, USABLE_TX_BD_ALLOC);
|
|
bce_dump_rx_bd_chain(sc, 0, USABLE_RX_BD_ALLOC);
|
|
bce_dump_pg_chain(sc, 0, USABLE_PG_BD_ALLOC);
|
|
bce_dump_status_block(sc);
|
|
bce_dump_stats_block(sc);
|
|
bce_dump_driver_state(sc);
|
|
bce_dump_hw_state(sc);
|
|
bce_dump_bc_state(sc);
|
|
bce_dump_txp_state(sc, 0);
|
|
bce_dump_rxp_state(sc, 0);
|
|
bce_dump_tpat_state(sc, 0);
|
|
bce_dump_cp_state(sc, 0);
|
|
bce_dump_com_state(sc, 0);
|
|
bce_dump_rv2p_state(sc);
|
|
bce_dump_pgbd(sc, 0, NULL);
|
|
}
|
|
|
|
bce_dump_status_block(sc);
|
|
bce_dump_driver_state(sc);
|
|
|
|
/* Call the debugger. */
|
|
breakpoint();
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|