c48efaecf6
CDC=0 simply means "no command codes", CDC=1 means "AT command codes." There's no driver change required! It's purely to tell the application layer whether to speak AT commands or not. Things are all still serial. PR: usb/183505 Reviewed by: hps MFC after: 1 week
795 lines
24 KiB
C
795 lines
24 KiB
C
/* $FreeBSD$ */
|
|
/*-
|
|
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
|
|
* Copyright (c) 1998 Lennart Augustsson. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* This file contains standard definitions for the following USB
|
|
* protocol versions:
|
|
*
|
|
* USB v1.0
|
|
* USB v1.1
|
|
* USB v2.0
|
|
* USB v3.0
|
|
*/
|
|
|
|
#ifndef _USB_STANDARD_H_
|
|
#define _USB_STANDARD_H_
|
|
|
|
#if defined(_KERNEL)
|
|
#ifndef USB_GLOBAL_INCLUDE_FILE
|
|
#include "opt_usb.h"
|
|
#endif
|
|
|
|
/* Declare parent SYSCTL USB node. */
|
|
#ifdef SYSCTL_DECL
|
|
SYSCTL_DECL(_hw_usb);
|
|
#endif
|
|
|
|
#ifndef USB_GLOBAL_INCLUDE_FILE
|
|
#include <sys/malloc.h>
|
|
#endif
|
|
|
|
MALLOC_DECLARE(M_USB);
|
|
MALLOC_DECLARE(M_USBDEV);
|
|
MALLOC_DECLARE(M_USBHC);
|
|
#endif /* _KERNEL */
|
|
|
|
#ifndef USB_GLOBAL_INCLUDE_FILE
|
|
#include <dev/usb/usb_endian.h>
|
|
#include <dev/usb/usb_freebsd.h>
|
|
#endif
|
|
|
|
#define USB_STACK_VERSION 2000 /* 2.0 */
|
|
|
|
/* Definition of some hardcoded USB constants. */
|
|
|
|
#define USB_MAX_IPACKET 8 /* initial USB packet size */
|
|
#define USB_EP_MAX (2*16) /* hardcoded */
|
|
#define USB_ROOT_HUB_ADDR 1 /* index */
|
|
#define USB_MIN_DEVICES 2 /* unused + root HUB */
|
|
#define USB_UNCONFIG_INDEX 0xFF /* internal use only */
|
|
#define USB_IFACE_INDEX_ANY 0xFF /* internal use only */
|
|
#define USB_START_ADDR 0 /* default USB device BUS address
|
|
* after USB bus reset */
|
|
#define USB_CONTROL_ENDPOINT 0 /* default control endpoint */
|
|
|
|
#define USB_FRAMES_PER_SECOND_FS 1000 /* full speed */
|
|
#define USB_FRAMES_PER_SECOND_HS 8000 /* high speed */
|
|
|
|
#define USB_FS_BYTES_PER_HS_UFRAME 188 /* bytes */
|
|
#define USB_HS_MICRO_FRAMES_MAX 8 /* units */
|
|
|
|
#define USB_ISOC_TIME_MAX 128 /* ms */
|
|
|
|
/*
|
|
* Minimum time a device needs to be powered down to go through a
|
|
* power cycle. These values are not in the USB specification.
|
|
*/
|
|
#define USB_POWER_DOWN_TIME 200 /* ms */
|
|
#define USB_PORT_POWER_DOWN_TIME 100 /* ms */
|
|
|
|
/* Definition of software USB power modes */
|
|
#define USB_POWER_MODE_OFF 0 /* turn off device */
|
|
#define USB_POWER_MODE_ON 1 /* always on */
|
|
#define USB_POWER_MODE_SAVE 2 /* automatic suspend and resume */
|
|
#define USB_POWER_MODE_SUSPEND 3 /* force suspend */
|
|
#define USB_POWER_MODE_RESUME 4 /* force resume */
|
|
|
|
/* These are the values from the USB specification. */
|
|
#define USB_PORT_RESET_DELAY_SPEC 10 /* ms */
|
|
#define USB_PORT_ROOT_RESET_DELAY_SPEC 50 /* ms */
|
|
#define USB_PORT_RESET_RECOVERY_SPEC 10 /* ms */
|
|
#define USB_PORT_POWERUP_DELAY_SPEC 100 /* ms */
|
|
#define USB_PORT_RESUME_DELAY_SPEC 20 /* ms */
|
|
#define USB_SET_ADDRESS_SETTLE_SPEC 2 /* ms */
|
|
#define USB_RESUME_DELAY_SPEC (20*5) /* ms */
|
|
#define USB_RESUME_WAIT_SPEC 10 /* ms */
|
|
#define USB_RESUME_RECOVERY_SPEC 10 /* ms */
|
|
#define USB_EXTRA_POWER_UP_TIME_SPEC 0 /* ms */
|
|
|
|
/* Allow for marginal and non-conforming devices. */
|
|
#define USB_PORT_RESET_DELAY 50 /* ms */
|
|
#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */
|
|
#define USB_PORT_RESET_RECOVERY 250 /* ms */
|
|
#define USB_PORT_POWERUP_DELAY 300 /* ms */
|
|
#define USB_PORT_RESUME_DELAY (20*2) /* ms */
|
|
#define USB_SET_ADDRESS_SETTLE 10 /* ms */
|
|
#define USB_RESUME_DELAY (50*5) /* ms */
|
|
#define USB_RESUME_WAIT 50 /* ms */
|
|
#define USB_RESUME_RECOVERY 50 /* ms */
|
|
#define USB_EXTRA_POWER_UP_TIME 20 /* ms */
|
|
|
|
#define USB_MIN_POWER 100 /* mA */
|
|
#define USB_MAX_POWER 500 /* mA */
|
|
|
|
#define USB_BUS_RESET_DELAY 100 /* ms */
|
|
|
|
/*
|
|
* USB record layout in memory:
|
|
*
|
|
* - USB config 0
|
|
* - USB interfaces
|
|
* - USB alternative interfaces
|
|
* - USB endpoints
|
|
*
|
|
* - USB config 1
|
|
* - USB interfaces
|
|
* - USB alternative interfaces
|
|
* - USB endpoints
|
|
*/
|
|
|
|
/* Declaration of USB records */
|
|
|
|
struct usb_device_request {
|
|
uByte bmRequestType;
|
|
uByte bRequest;
|
|
uWord wValue;
|
|
uWord wIndex;
|
|
uWord wLength;
|
|
} __packed;
|
|
typedef struct usb_device_request usb_device_request_t;
|
|
|
|
#define UT_WRITE 0x00
|
|
#define UT_READ 0x80
|
|
#define UT_STANDARD 0x00
|
|
#define UT_CLASS 0x20
|
|
#define UT_VENDOR 0x40
|
|
#define UT_DEVICE 0x00
|
|
#define UT_INTERFACE 0x01
|
|
#define UT_ENDPOINT 0x02
|
|
#define UT_OTHER 0x03
|
|
|
|
#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE)
|
|
#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE)
|
|
#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT)
|
|
#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE)
|
|
#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE)
|
|
#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT)
|
|
#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE)
|
|
#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE)
|
|
#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER)
|
|
#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT)
|
|
#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE)
|
|
#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
|
|
#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER)
|
|
#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT)
|
|
#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE)
|
|
#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE)
|
|
#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER)
|
|
#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT)
|
|
#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE)
|
|
#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
|
|
#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER)
|
|
#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
|
|
|
|
/* Requests */
|
|
#define UR_GET_STATUS 0x00
|
|
#define UR_CLEAR_FEATURE 0x01
|
|
#define UR_SET_FEATURE 0x03
|
|
#define UR_SET_ADDRESS 0x05
|
|
#define UR_GET_DESCRIPTOR 0x06
|
|
#define UDESC_DEVICE 0x01
|
|
#define UDESC_CONFIG 0x02
|
|
#define UDESC_STRING 0x03
|
|
#define USB_LANGUAGE_TABLE 0x00 /* language ID string index */
|
|
#define UDESC_INTERFACE 0x04
|
|
#define UDESC_ENDPOINT 0x05
|
|
#define UDESC_DEVICE_QUALIFIER 0x06
|
|
#define UDESC_OTHER_SPEED_CONFIGURATION 0x07
|
|
#define UDESC_INTERFACE_POWER 0x08
|
|
#define UDESC_OTG 0x09
|
|
#define UDESC_DEBUG 0x0A
|
|
#define UDESC_IFACE_ASSOC 0x0B /* interface association */
|
|
#define UDESC_BOS 0x0F /* binary object store */
|
|
#define UDESC_DEVICE_CAPABILITY 0x10
|
|
#define UDESC_CS_DEVICE 0x21 /* class specific */
|
|
#define UDESC_CS_CONFIG 0x22
|
|
#define UDESC_CS_STRING 0x23
|
|
#define UDESC_CS_INTERFACE 0x24
|
|
#define UDESC_CS_ENDPOINT 0x25
|
|
#define UDESC_HUB 0x29
|
|
#define UDESC_SS_HUB 0x2A /* super speed */
|
|
#define UDESC_ENDPOINT_SS_COMP 0x30 /* super speed */
|
|
#define UR_SET_DESCRIPTOR 0x07
|
|
#define UR_GET_CONFIG 0x08
|
|
#define UR_SET_CONFIG 0x09
|
|
#define UR_GET_INTERFACE 0x0a
|
|
#define UR_SET_INTERFACE 0x0b
|
|
#define UR_SYNCH_FRAME 0x0c
|
|
#define UR_SET_SEL 0x30
|
|
#define UR_ISOCH_DELAY 0x31
|
|
|
|
/* HUB specific request */
|
|
#define UR_GET_BUS_STATE 0x02
|
|
#define UR_CLEAR_TT_BUFFER 0x08
|
|
#define UR_RESET_TT 0x09
|
|
#define UR_GET_TT_STATE 0x0a
|
|
#define UR_STOP_TT 0x0b
|
|
#define UR_SET_AND_TEST 0x0c /* USB 2.0 only */
|
|
#define UR_SET_HUB_DEPTH 0x0c /* USB 3.0 only */
|
|
#define USB_SS_HUB_DEPTH_MAX 5
|
|
#define UR_GET_PORT_ERR_COUNT 0x0d
|
|
|
|
/* Feature numbers */
|
|
#define UF_ENDPOINT_HALT 0
|
|
#define UF_DEVICE_REMOTE_WAKEUP 1
|
|
#define UF_TEST_MODE 2
|
|
#define UF_U1_ENABLE 0x30
|
|
#define UF_U2_ENABLE 0x31
|
|
#define UF_LTM_ENABLE 0x32
|
|
|
|
/* HUB specific features */
|
|
#define UHF_C_HUB_LOCAL_POWER 0
|
|
#define UHF_C_HUB_OVER_CURRENT 1
|
|
#define UHF_PORT_CONNECTION 0
|
|
#define UHF_PORT_ENABLE 1
|
|
#define UHF_PORT_SUSPEND 2
|
|
#define UHF_PORT_OVER_CURRENT 3
|
|
#define UHF_PORT_RESET 4
|
|
#define UHF_PORT_LINK_STATE 5
|
|
#define UHF_PORT_POWER 8
|
|
#define UHF_PORT_LOW_SPEED 9
|
|
#define UHF_PORT_L1 10
|
|
#define UHF_C_PORT_CONNECTION 16
|
|
#define UHF_C_PORT_ENABLE 17
|
|
#define UHF_C_PORT_SUSPEND 18
|
|
#define UHF_C_PORT_OVER_CURRENT 19
|
|
#define UHF_C_PORT_RESET 20
|
|
#define UHF_PORT_TEST 21
|
|
#define UHF_PORT_INDICATOR 22
|
|
#define UHF_C_PORT_L1 23
|
|
|
|
/* SuperSpeed HUB specific features */
|
|
#define UHF_PORT_U1_TIMEOUT 23
|
|
#define UHF_PORT_U2_TIMEOUT 24
|
|
#define UHF_C_PORT_LINK_STATE 25
|
|
#define UHF_C_PORT_CONFIG_ERROR 26
|
|
#define UHF_PORT_REMOTE_WAKE_MASK 27
|
|
#define UHF_BH_PORT_RESET 28
|
|
#define UHF_C_BH_PORT_RESET 29
|
|
#define UHF_FORCE_LINKPM_ACCEPT 30
|
|
|
|
struct usb_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bDescriptorSubtype;
|
|
} __packed;
|
|
typedef struct usb_descriptor usb_descriptor_t;
|
|
|
|
struct usb_device_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uWord bcdUSB;
|
|
#define UD_USB_2_0 0x0200
|
|
#define UD_USB_3_0 0x0300
|
|
#define UD_IS_USB2(d) ((d)->bcdUSB[1] == 0x02)
|
|
#define UD_IS_USB3(d) ((d)->bcdUSB[1] == 0x03)
|
|
uByte bDeviceClass;
|
|
uByte bDeviceSubClass;
|
|
uByte bDeviceProtocol;
|
|
uByte bMaxPacketSize;
|
|
/* The fields below are not part of the initial descriptor. */
|
|
uWord idVendor;
|
|
uWord idProduct;
|
|
uWord bcdDevice;
|
|
uByte iManufacturer;
|
|
uByte iProduct;
|
|
uByte iSerialNumber;
|
|
uByte bNumConfigurations;
|
|
} __packed;
|
|
typedef struct usb_device_descriptor usb_device_descriptor_t;
|
|
|
|
/* Binary Device Object Store (BOS) */
|
|
struct usb_bos_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uWord wTotalLength;
|
|
uByte bNumDeviceCaps;
|
|
} __packed;
|
|
typedef struct usb_bos_descriptor usb_bos_descriptor_t;
|
|
|
|
/* Binary Device Object Store Capability */
|
|
struct usb_bos_cap_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bDevCapabilityType;
|
|
#define USB_DEVCAP_RESERVED 0x00
|
|
#define USB_DEVCAP_WUSB 0x01
|
|
#define USB_DEVCAP_USB2EXT 0x02
|
|
#define USB_DEVCAP_SUPER_SPEED 0x03
|
|
#define USB_DEVCAP_CONTAINER_ID 0x04
|
|
/* data ... */
|
|
} __packed;
|
|
typedef struct usb_bos_cap_descriptor usb_bos_cap_descriptor_t;
|
|
|
|
struct usb_devcap_usb2ext_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bDevCapabilityType;
|
|
uDWord bmAttributes;
|
|
#define USB_V2EXT_LPM (1U << 1)
|
|
#define USB_V2EXT_BESL_SUPPORTED (1U << 2)
|
|
#define USB_V2EXT_BESL_BASELINE_VALID (1U << 3)
|
|
#define USB_V2EXT_BESL_DEEP_VALID (1U << 4)
|
|
#define USB_V2EXT_BESL_BASELINE_GET(x) (((x) >> 8) & 0xF)
|
|
#define USB_V2EXT_BESL_DEEP_GET(x) (((x) >> 12) & 0xF)
|
|
} __packed;
|
|
typedef struct usb_devcap_usb2ext_descriptor usb_devcap_usb2ext_descriptor_t;
|
|
|
|
struct usb_devcap_ss_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bDevCapabilityType;
|
|
uByte bmAttributes;
|
|
uWord wSpeedsSupported;
|
|
uByte bFunctionalitySupport;
|
|
uByte bU1DevExitLat;
|
|
uWord wU2DevExitLat;
|
|
} __packed;
|
|
typedef struct usb_devcap_ss_descriptor usb_devcap_ss_descriptor_t;
|
|
|
|
struct usb_devcap_container_id_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bDevCapabilityType;
|
|
uByte bReserved;
|
|
uByte bContainerID;
|
|
} __packed;
|
|
typedef struct usb_devcap_container_id_descriptor
|
|
usb_devcap_container_id_descriptor_t;
|
|
|
|
/* Device class codes */
|
|
#define UDCLASS_IN_INTERFACE 0x00
|
|
#define UDCLASS_COMM 0x02
|
|
#define UDCLASS_HUB 0x09
|
|
#define UDSUBCLASS_HUB 0x00
|
|
#define UDPROTO_FSHUB 0x00
|
|
#define UDPROTO_HSHUBSTT 0x01
|
|
#define UDPROTO_HSHUBMTT 0x02
|
|
#define UDPROTO_SSHUB 0x03
|
|
#define UDCLASS_DIAGNOSTIC 0xdc
|
|
#define UDCLASS_WIRELESS 0xe0
|
|
#define UDSUBCLASS_RF 0x01
|
|
#define UDPROTO_BLUETOOTH 0x01
|
|
#define UDCLASS_VENDOR 0xff
|
|
|
|
struct usb_config_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uWord wTotalLength;
|
|
uByte bNumInterface;
|
|
uByte bConfigurationValue;
|
|
#define USB_UNCONFIG_NO 0
|
|
uByte iConfiguration;
|
|
uByte bmAttributes;
|
|
#define UC_BUS_POWERED 0x80
|
|
#define UC_SELF_POWERED 0x40
|
|
#define UC_REMOTE_WAKEUP 0x20
|
|
uByte bMaxPower; /* max current in 2 mA units */
|
|
#define UC_POWER_FACTOR 2
|
|
} __packed;
|
|
typedef struct usb_config_descriptor usb_config_descriptor_t;
|
|
|
|
struct usb_interface_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bInterfaceNumber;
|
|
uByte bAlternateSetting;
|
|
uByte bNumEndpoints;
|
|
uByte bInterfaceClass;
|
|
uByte bInterfaceSubClass;
|
|
uByte bInterfaceProtocol;
|
|
uByte iInterface;
|
|
} __packed;
|
|
typedef struct usb_interface_descriptor usb_interface_descriptor_t;
|
|
|
|
struct usb_interface_assoc_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bFirstInterface;
|
|
uByte bInterfaceCount;
|
|
uByte bFunctionClass;
|
|
uByte bFunctionSubClass;
|
|
uByte bFunctionProtocol;
|
|
uByte iFunction;
|
|
} __packed;
|
|
typedef struct usb_interface_assoc_descriptor usb_interface_assoc_descriptor_t;
|
|
|
|
/* Interface class codes */
|
|
#define UICLASS_UNSPEC 0x00
|
|
#define UICLASS_AUDIO 0x01 /* audio */
|
|
#define UISUBCLASS_AUDIOCONTROL 1
|
|
#define UISUBCLASS_AUDIOSTREAM 2
|
|
#define UISUBCLASS_MIDISTREAM 3
|
|
|
|
#define UICLASS_CDC 0x02 /* communication */
|
|
#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1
|
|
#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2
|
|
#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3
|
|
#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4
|
|
#define UISUBCLASS_CAPI_CONTROLMODEL 5
|
|
#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
|
|
#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
|
|
#define UISUBCLASS_WIRELESS_HANDSET_CM 8
|
|
#define UISUBCLASS_DEVICE_MGMT 9
|
|
#define UISUBCLASS_MOBILE_DIRECT_LINE_MODEL 10
|
|
#define UISUBCLASS_OBEX 11
|
|
#define UISUBCLASS_ETHERNET_EMULATION_MODEL 12
|
|
#define UISUBCLASS_NETWORK_CONTROL_MODEL 13
|
|
|
|
#define UIPROTO_CDC_NONE 0
|
|
#define UIPROTO_CDC_AT 1
|
|
|
|
#define UICLASS_HID 0x03
|
|
#define UISUBCLASS_BOOT 1
|
|
#define UIPROTO_BOOT_KEYBOARD 1
|
|
#define UIPROTO_MOUSE 2
|
|
|
|
#define UICLASS_PHYSICAL 0x05
|
|
#define UICLASS_IMAGE 0x06
|
|
#define UISUBCLASS_SIC 1 /* still image class */
|
|
#define UICLASS_PRINTER 0x07
|
|
#define UISUBCLASS_PRINTER 1
|
|
#define UIPROTO_PRINTER_UNI 1
|
|
#define UIPROTO_PRINTER_BI 2
|
|
#define UIPROTO_PRINTER_1284 3
|
|
|
|
#define UICLASS_MASS 0x08
|
|
#define UISUBCLASS_RBC 1
|
|
#define UISUBCLASS_SFF8020I 2
|
|
#define UISUBCLASS_QIC157 3
|
|
#define UISUBCLASS_UFI 4
|
|
#define UISUBCLASS_SFF8070I 5
|
|
#define UISUBCLASS_SCSI 6
|
|
#define UIPROTO_MASS_CBI_I 0
|
|
#define UIPROTO_MASS_CBI 1
|
|
#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */
|
|
#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */
|
|
|
|
#define UICLASS_HUB 0x09
|
|
#define UISUBCLASS_HUB 0
|
|
#define UIPROTO_FSHUB 0
|
|
#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */
|
|
#define UIPROTO_HSHUBMTT 1
|
|
|
|
#define UICLASS_CDC_DATA 0x0a
|
|
#define UISUBCLASS_DATA 0x00
|
|
#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */
|
|
#define UIPROTO_DATA_HDLC 0x31 /* HDLC */
|
|
#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */
|
|
#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */
|
|
#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */
|
|
#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */
|
|
#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */
|
|
#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */
|
|
#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */
|
|
#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */
|
|
#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */
|
|
#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc. */
|
|
#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */
|
|
#define UIPROTO_DATA_NCM 0x01 /* Network Control Model */
|
|
|
|
#define UICLASS_SMARTCARD 0x0b
|
|
#define UICLASS_FIRM_UPD 0x0c
|
|
#define UICLASS_SECURITY 0x0d
|
|
#define UICLASS_DIAGNOSTIC 0xdc
|
|
#define UICLASS_WIRELESS 0xe0
|
|
#define UISUBCLASS_RF 0x01
|
|
#define UIPROTO_BLUETOOTH 0x01
|
|
|
|
#define UICLASS_IAD 0xEF /* Interface Association Descriptor */
|
|
|
|
#define UICLASS_APPL_SPEC 0xfe
|
|
#define UISUBCLASS_FIRMWARE_DOWNLOAD 1
|
|
#define UISUBCLASS_IRDA 2
|
|
#define UIPROTO_IRDA 0
|
|
|
|
#define UICLASS_VENDOR 0xff
|
|
#define UISUBCLASS_XBOX360_CONTROLLER 0x5d
|
|
#define UIPROTO_XBOX360_GAMEPAD 0x01
|
|
|
|
struct usb_endpoint_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bEndpointAddress;
|
|
#define UE_GET_DIR(a) ((a) & 0x80)
|
|
#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7))
|
|
#define UE_DIR_IN 0x80 /* IN-token endpoint, fixed */
|
|
#define UE_DIR_OUT 0x00 /* OUT-token endpoint, fixed */
|
|
#define UE_DIR_RX 0xfd /* for internal use only! */
|
|
#define UE_DIR_TX 0xfe /* for internal use only! */
|
|
#define UE_DIR_ANY 0xff /* for internal use only! */
|
|
#define UE_ADDR 0x0f
|
|
#define UE_ADDR_ANY 0xff /* for internal use only! */
|
|
#define UE_GET_ADDR(a) ((a) & UE_ADDR)
|
|
uByte bmAttributes;
|
|
#define UE_XFERTYPE 0x03
|
|
#define UE_CONTROL 0x00
|
|
#define UE_ISOCHRONOUS 0x01
|
|
#define UE_BULK 0x02
|
|
#define UE_INTERRUPT 0x03
|
|
#define UE_BULK_INTR 0xfe /* for internal use only! */
|
|
#define UE_TYPE_ANY 0xff /* for internal use only! */
|
|
#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE)
|
|
#define UE_ISO_TYPE 0x0c
|
|
#define UE_ISO_ASYNC 0x04
|
|
#define UE_ISO_ADAPT 0x08
|
|
#define UE_ISO_SYNC 0x0c
|
|
#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE)
|
|
uWord wMaxPacketSize;
|
|
#define UE_ZERO_MPS 0xFFFF /* for internal use only */
|
|
uByte bInterval;
|
|
} __packed;
|
|
typedef struct usb_endpoint_descriptor usb_endpoint_descriptor_t;
|
|
|
|
struct usb_endpoint_ss_comp_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bMaxBurst;
|
|
uByte bmAttributes;
|
|
#define UE_GET_BULK_STREAMS(x) ((x) & 0x0F)
|
|
#define UE_GET_SS_ISO_MULT(x) ((x) & 0x03)
|
|
uWord wBytesPerInterval;
|
|
} __packed;
|
|
typedef struct usb_endpoint_ss_comp_descriptor
|
|
usb_endpoint_ss_comp_descriptor_t;
|
|
|
|
struct usb_string_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uWord bString[126];
|
|
uByte bUnused;
|
|
} __packed;
|
|
typedef struct usb_string_descriptor usb_string_descriptor_t;
|
|
|
|
#define USB_MAKE_STRING_DESC(m,name) \
|
|
static const struct { \
|
|
uByte bLength; \
|
|
uByte bDescriptorType; \
|
|
uByte bData[sizeof((uint8_t []){m})]; \
|
|
} __packed name = { \
|
|
.bLength = sizeof(name), \
|
|
.bDescriptorType = UDESC_STRING, \
|
|
.bData = { m }, \
|
|
}
|
|
|
|
struct usb_string_lang {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bData[2];
|
|
} __packed;
|
|
typedef struct usb_string_lang usb_string_lang_t;
|
|
|
|
struct usb_hub_descriptor {
|
|
uByte bDescLength;
|
|
uByte bDescriptorType;
|
|
uByte bNbrPorts;
|
|
uWord wHubCharacteristics;
|
|
#define UHD_PWR 0x0003
|
|
#define UHD_PWR_GANGED 0x0000
|
|
#define UHD_PWR_INDIVIDUAL 0x0001
|
|
#define UHD_PWR_NO_SWITCH 0x0002
|
|
#define UHD_COMPOUND 0x0004
|
|
#define UHD_OC 0x0018
|
|
#define UHD_OC_GLOBAL 0x0000
|
|
#define UHD_OC_INDIVIDUAL 0x0008
|
|
#define UHD_OC_NONE 0x0010
|
|
#define UHD_TT_THINK 0x0060
|
|
#define UHD_TT_THINK_8 0x0000
|
|
#define UHD_TT_THINK_16 0x0020
|
|
#define UHD_TT_THINK_24 0x0040
|
|
#define UHD_TT_THINK_32 0x0060
|
|
#define UHD_PORT_IND 0x0080
|
|
uByte bPwrOn2PwrGood; /* delay in 2 ms units */
|
|
#define UHD_PWRON_FACTOR 2
|
|
uByte bHubContrCurrent;
|
|
uByte DeviceRemovable[32]; /* max 255 ports */
|
|
#define UHD_NOT_REMOV(desc, i) \
|
|
(((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
|
|
uByte PortPowerCtrlMask[1]; /* deprecated */
|
|
} __packed;
|
|
typedef struct usb_hub_descriptor usb_hub_descriptor_t;
|
|
|
|
struct usb_hub_ss_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bNbrPorts;
|
|
uWord wHubCharacteristics;
|
|
uByte bPwrOn2PwrGood; /* delay in 2 ms units */
|
|
uByte bHubContrCurrent;
|
|
uByte bHubHdrDecLat;
|
|
uWord wHubDelay;
|
|
uByte DeviceRemovable[32]; /* max 255 ports */
|
|
} __packed;
|
|
typedef struct usb_hub_ss_descriptor usb_hub_ss_descriptor_t;
|
|
|
|
/* minimum HUB descriptor (8-ports maximum) */
|
|
struct usb_hub_descriptor_min {
|
|
uByte bDescLength;
|
|
uByte bDescriptorType;
|
|
uByte bNbrPorts;
|
|
uWord wHubCharacteristics;
|
|
uByte bPwrOn2PwrGood;
|
|
uByte bHubContrCurrent;
|
|
uByte DeviceRemovable[1];
|
|
uByte PortPowerCtrlMask[1];
|
|
} __packed;
|
|
typedef struct usb_hub_descriptor_min usb_hub_descriptor_min_t;
|
|
|
|
struct usb_device_qualifier {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uWord bcdUSB;
|
|
uByte bDeviceClass;
|
|
uByte bDeviceSubClass;
|
|
uByte bDeviceProtocol;
|
|
uByte bMaxPacketSize0;
|
|
uByte bNumConfigurations;
|
|
uByte bReserved;
|
|
} __packed;
|
|
typedef struct usb_device_qualifier usb_device_qualifier_t;
|
|
|
|
struct usb_otg_descriptor {
|
|
uByte bLength;
|
|
uByte bDescriptorType;
|
|
uByte bmAttributes;
|
|
#define UOTG_SRP 0x01
|
|
#define UOTG_HNP 0x02
|
|
} __packed;
|
|
typedef struct usb_otg_descriptor usb_otg_descriptor_t;
|
|
|
|
/* OTG feature selectors */
|
|
#define UOTG_B_HNP_ENABLE 3
|
|
#define UOTG_A_HNP_SUPPORT 4
|
|
#define UOTG_A_ALT_HNP_SUPPORT 5
|
|
|
|
struct usb_status {
|
|
uWord wStatus;
|
|
/* Device status flags */
|
|
#define UDS_SELF_POWERED 0x0001
|
|
#define UDS_REMOTE_WAKEUP 0x0002
|
|
/* Endpoint status flags */
|
|
#define UES_HALT 0x0001
|
|
} __packed;
|
|
typedef struct usb_status usb_status_t;
|
|
|
|
struct usb_hub_status {
|
|
uWord wHubStatus;
|
|
#define UHS_LOCAL_POWER 0x0001
|
|
#define UHS_OVER_CURRENT 0x0002
|
|
uWord wHubChange;
|
|
} __packed;
|
|
typedef struct usb_hub_status usb_hub_status_t;
|
|
|
|
struct usb_port_status {
|
|
uWord wPortStatus;
|
|
#define UPS_CURRENT_CONNECT_STATUS 0x0001
|
|
#define UPS_PORT_ENABLED 0x0002
|
|
#define UPS_SUSPEND 0x0004
|
|
#define UPS_OVERCURRENT_INDICATOR 0x0008
|
|
#define UPS_RESET 0x0010
|
|
#define UPS_PORT_L1 0x0020 /* USB 2.0 only */
|
|
/* The link-state bits are valid for Super-Speed USB HUBs */
|
|
#define UPS_PORT_LINK_STATE_GET(x) (((x) >> 5) & 0xF)
|
|
#define UPS_PORT_LINK_STATE_SET(x) (((x) & 0xF) << 5)
|
|
#define UPS_PORT_LS_U0 0x00
|
|
#define UPS_PORT_LS_U1 0x01
|
|
#define UPS_PORT_LS_U2 0x02
|
|
#define UPS_PORT_LS_U3 0x03
|
|
#define UPS_PORT_LS_SS_DIS 0x04
|
|
#define UPS_PORT_LS_RX_DET 0x05
|
|
#define UPS_PORT_LS_SS_INA 0x06
|
|
#define UPS_PORT_LS_POLL 0x07
|
|
#define UPS_PORT_LS_RECOVER 0x08
|
|
#define UPS_PORT_LS_HOT_RST 0x09
|
|
#define UPS_PORT_LS_COMP_MODE 0x0A
|
|
#define UPS_PORT_LS_LOOPBACK 0x0B
|
|
#define UPS_PORT_LS_RESUME 0x0F
|
|
#define UPS_PORT_POWER 0x0100
|
|
#define UPS_PORT_POWER_SS 0x0200 /* super-speed only */
|
|
#define UPS_LOW_SPEED 0x0200
|
|
#define UPS_HIGH_SPEED 0x0400
|
|
#define UPS_OTHER_SPEED 0x0600 /* currently FreeBSD specific */
|
|
#define UPS_PORT_TEST 0x0800
|
|
#define UPS_PORT_INDICATOR 0x1000
|
|
#define UPS_PORT_MODE_DEVICE 0x8000 /* currently FreeBSD specific */
|
|
uWord wPortChange;
|
|
#define UPS_C_CONNECT_STATUS 0x0001
|
|
#define UPS_C_PORT_ENABLED 0x0002
|
|
#define UPS_C_SUSPEND 0x0004
|
|
#define UPS_C_OVERCURRENT_INDICATOR 0x0008
|
|
#define UPS_C_PORT_RESET 0x0010
|
|
#define UPS_C_PORT_L1 0x0020 /* USB 2.0 only */
|
|
#define UPS_C_BH_PORT_RESET 0x0020 /* USB 3.0 only */
|
|
#define UPS_C_PORT_LINK_STATE 0x0040
|
|
#define UPS_C_PORT_CONFIG_ERROR 0x0080
|
|
} __packed;
|
|
typedef struct usb_port_status usb_port_status_t;
|
|
|
|
/*
|
|
* The "USB_SPEED" macros defines all the supported USB speeds.
|
|
*/
|
|
enum usb_dev_speed {
|
|
USB_SPEED_VARIABLE,
|
|
USB_SPEED_LOW,
|
|
USB_SPEED_FULL,
|
|
USB_SPEED_HIGH,
|
|
USB_SPEED_SUPER,
|
|
};
|
|
#define USB_SPEED_MAX (USB_SPEED_SUPER+1)
|
|
|
|
/*
|
|
* The "USB_REV" macros defines all the supported USB revisions.
|
|
*/
|
|
enum usb_revision {
|
|
USB_REV_UNKNOWN,
|
|
USB_REV_PRE_1_0,
|
|
USB_REV_1_0,
|
|
USB_REV_1_1,
|
|
USB_REV_2_0,
|
|
USB_REV_2_5,
|
|
USB_REV_3_0
|
|
};
|
|
#define USB_REV_MAX (USB_REV_3_0+1)
|
|
|
|
/*
|
|
* Supported host controller modes.
|
|
*/
|
|
enum usb_hc_mode {
|
|
USB_MODE_HOST, /* initiates transfers */
|
|
USB_MODE_DEVICE, /* bus transfer target */
|
|
USB_MODE_DUAL /* can be host or device */
|
|
};
|
|
#define USB_MODE_MAX (USB_MODE_DUAL+1)
|
|
|
|
/*
|
|
* The "USB_STATE" enums define all the supported device states.
|
|
*/
|
|
enum usb_dev_state {
|
|
USB_STATE_DETACHED,
|
|
USB_STATE_ATTACHED,
|
|
USB_STATE_POWERED,
|
|
USB_STATE_ADDRESSED,
|
|
USB_STATE_CONFIGURED,
|
|
};
|
|
#define USB_STATE_MAX (USB_STATE_CONFIGURED+1)
|
|
|
|
/*
|
|
* The "USB_EP_MODE" macros define all the currently supported
|
|
* endpoint modes.
|
|
*/
|
|
enum usb_ep_mode {
|
|
USB_EP_MODE_DEFAULT,
|
|
USB_EP_MODE_STREAMS, /* USB3.0 specific */
|
|
USB_EP_MODE_HW_MASS_STORAGE,
|
|
USB_EP_MODE_HW_SERIAL,
|
|
USB_EP_MODE_HW_ETHERNET_CDC,
|
|
USB_EP_MODE_HW_ETHERNET_NCM,
|
|
USB_EP_MODE_MAX
|
|
};
|
|
#endif /* _USB_STANDARD_H_ */
|