d176b8039e
BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in drivers when the driver doesn't support a particular command. Do a sweep and fix that. Reported by: imp
6574 lines
178 KiB
C
6574 lines
178 KiB
C
/*-
|
|
* Implementation of SCSI Direct Access Peripheral driver for CAM.
|
|
*
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 1997 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
|
|
#ifdef _KERNEL
|
|
#include "opt_da.h"
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/sbuf.h>
|
|
#include <geom/geom.h>
|
|
#include <geom/geom_disk.h>
|
|
#include <machine/atomic.h>
|
|
#endif /* _KERNEL */
|
|
|
|
#ifndef _KERNEL
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#endif /* _KERNEL */
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_periph.h>
|
|
#include <cam/cam_xpt_periph.h>
|
|
#ifdef _KERNEL
|
|
#include <cam/cam_xpt_internal.h>
|
|
#endif /* _KERNEL */
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_iosched.h>
|
|
|
|
#include <cam/scsi/scsi_message.h>
|
|
#include <cam/scsi/scsi_da.h>
|
|
|
|
#ifdef _KERNEL
|
|
/*
|
|
* Note that there are probe ordering dependencies here. The order isn't
|
|
* controlled by this enumeration, but by explicit state transitions in
|
|
* dastart() and dadone(). Here are some of the dependencies:
|
|
*
|
|
* 1. RC should come first, before RC16, unless there is evidence that RC16
|
|
* is supported.
|
|
* 2. BDC needs to come before any of the ATA probes, or the ZONE probe.
|
|
* 3. The ATA probes should go in this order:
|
|
* ATA -> LOGDIR -> IDDIR -> SUP -> ATA_ZONE
|
|
*/
|
|
typedef enum {
|
|
DA_STATE_PROBE_WP,
|
|
DA_STATE_PROBE_RC,
|
|
DA_STATE_PROBE_RC16,
|
|
DA_STATE_PROBE_LBP,
|
|
DA_STATE_PROBE_BLK_LIMITS,
|
|
DA_STATE_PROBE_BDC,
|
|
DA_STATE_PROBE_ATA,
|
|
DA_STATE_PROBE_ATA_LOGDIR,
|
|
DA_STATE_PROBE_ATA_IDDIR,
|
|
DA_STATE_PROBE_ATA_SUP,
|
|
DA_STATE_PROBE_ATA_ZONE,
|
|
DA_STATE_PROBE_ZONE,
|
|
DA_STATE_NORMAL
|
|
} da_state;
|
|
|
|
typedef enum {
|
|
DA_FLAG_PACK_INVALID = 0x000001,
|
|
DA_FLAG_NEW_PACK = 0x000002,
|
|
DA_FLAG_PACK_LOCKED = 0x000004,
|
|
DA_FLAG_PACK_REMOVABLE = 0x000008,
|
|
DA_FLAG_NEED_OTAG = 0x000020,
|
|
DA_FLAG_WAS_OTAG = 0x000040,
|
|
DA_FLAG_RETRY_UA = 0x000080,
|
|
DA_FLAG_OPEN = 0x000100,
|
|
DA_FLAG_SCTX_INIT = 0x000200,
|
|
DA_FLAG_CAN_RC16 = 0x000400,
|
|
DA_FLAG_PROBED = 0x000800,
|
|
DA_FLAG_DIRTY = 0x001000,
|
|
DA_FLAG_ANNOUNCED = 0x002000,
|
|
DA_FLAG_CAN_ATA_DMA = 0x004000,
|
|
DA_FLAG_CAN_ATA_LOG = 0x008000,
|
|
DA_FLAG_CAN_ATA_IDLOG = 0x010000,
|
|
DA_FLAG_CAN_ATA_SUPCAP = 0x020000,
|
|
DA_FLAG_CAN_ATA_ZONE = 0x040000,
|
|
DA_FLAG_TUR_PENDING = 0x080000
|
|
} da_flags;
|
|
|
|
typedef enum {
|
|
DA_Q_NONE = 0x00,
|
|
DA_Q_NO_SYNC_CACHE = 0x01,
|
|
DA_Q_NO_6_BYTE = 0x02,
|
|
DA_Q_NO_PREVENT = 0x04,
|
|
DA_Q_4K = 0x08,
|
|
DA_Q_NO_RC16 = 0x10,
|
|
DA_Q_NO_UNMAP = 0x20,
|
|
DA_Q_RETRY_BUSY = 0x40,
|
|
DA_Q_SMR_DM = 0x80,
|
|
DA_Q_STRICT_UNMAP = 0x100,
|
|
DA_Q_128KB = 0x200
|
|
} da_quirks;
|
|
|
|
#define DA_Q_BIT_STRING \
|
|
"\020" \
|
|
"\001NO_SYNC_CACHE" \
|
|
"\002NO_6_BYTE" \
|
|
"\003NO_PREVENT" \
|
|
"\0044K" \
|
|
"\005NO_RC16" \
|
|
"\006NO_UNMAP" \
|
|
"\007RETRY_BUSY" \
|
|
"\010SMR_DM" \
|
|
"\011STRICT_UNMAP" \
|
|
"\012128KB"
|
|
|
|
typedef enum {
|
|
DA_CCB_PROBE_RC = 0x01,
|
|
DA_CCB_PROBE_RC16 = 0x02,
|
|
DA_CCB_PROBE_LBP = 0x03,
|
|
DA_CCB_PROBE_BLK_LIMITS = 0x04,
|
|
DA_CCB_PROBE_BDC = 0x05,
|
|
DA_CCB_PROBE_ATA = 0x06,
|
|
DA_CCB_BUFFER_IO = 0x07,
|
|
DA_CCB_DUMP = 0x0A,
|
|
DA_CCB_DELETE = 0x0B,
|
|
DA_CCB_TUR = 0x0C,
|
|
DA_CCB_PROBE_ZONE = 0x0D,
|
|
DA_CCB_PROBE_ATA_LOGDIR = 0x0E,
|
|
DA_CCB_PROBE_ATA_IDDIR = 0x0F,
|
|
DA_CCB_PROBE_ATA_SUP = 0x10,
|
|
DA_CCB_PROBE_ATA_ZONE = 0x11,
|
|
DA_CCB_PROBE_WP = 0x12,
|
|
DA_CCB_TYPE_MASK = 0x1F,
|
|
DA_CCB_RETRY_UA = 0x20
|
|
} da_ccb_state;
|
|
|
|
/*
|
|
* Order here is important for method choice
|
|
*
|
|
* We prefer ATA_TRIM as tests run against a Sandforce 2281 SSD attached to
|
|
* LSI 2008 (mps) controller (FW: v12, Drv: v14) resulted 20% quicker deletes
|
|
* using ATA_TRIM than the corresponding UNMAP results for a real world mysql
|
|
* import taking 5mins.
|
|
*
|
|
*/
|
|
typedef enum {
|
|
DA_DELETE_NONE,
|
|
DA_DELETE_DISABLE,
|
|
DA_DELETE_ATA_TRIM,
|
|
DA_DELETE_UNMAP,
|
|
DA_DELETE_WS16,
|
|
DA_DELETE_WS10,
|
|
DA_DELETE_ZERO,
|
|
DA_DELETE_MIN = DA_DELETE_ATA_TRIM,
|
|
DA_DELETE_MAX = DA_DELETE_ZERO
|
|
} da_delete_methods;
|
|
|
|
/*
|
|
* For SCSI, host managed drives show up as a separate device type. For
|
|
* ATA, host managed drives also have a different device signature.
|
|
* XXX KDM figure out the ATA host managed signature.
|
|
*/
|
|
typedef enum {
|
|
DA_ZONE_NONE = 0x00,
|
|
DA_ZONE_DRIVE_MANAGED = 0x01,
|
|
DA_ZONE_HOST_AWARE = 0x02,
|
|
DA_ZONE_HOST_MANAGED = 0x03
|
|
} da_zone_mode;
|
|
|
|
/*
|
|
* We distinguish between these interface cases in addition to the drive type:
|
|
* o ATA drive behind a SCSI translation layer that knows about ZBC/ZAC
|
|
* o ATA drive behind a SCSI translation layer that does not know about
|
|
* ZBC/ZAC, and so needs to be managed via ATA passthrough. In this
|
|
* case, we would need to share the ATA code with the ada(4) driver.
|
|
* o SCSI drive.
|
|
*/
|
|
typedef enum {
|
|
DA_ZONE_IF_SCSI,
|
|
DA_ZONE_IF_ATA_PASS,
|
|
DA_ZONE_IF_ATA_SAT,
|
|
} da_zone_interface;
|
|
|
|
typedef enum {
|
|
DA_ZONE_FLAG_RZ_SUP = 0x0001,
|
|
DA_ZONE_FLAG_OPEN_SUP = 0x0002,
|
|
DA_ZONE_FLAG_CLOSE_SUP = 0x0004,
|
|
DA_ZONE_FLAG_FINISH_SUP = 0x0008,
|
|
DA_ZONE_FLAG_RWP_SUP = 0x0010,
|
|
DA_ZONE_FLAG_SUP_MASK = (DA_ZONE_FLAG_RZ_SUP |
|
|
DA_ZONE_FLAG_OPEN_SUP |
|
|
DA_ZONE_FLAG_CLOSE_SUP |
|
|
DA_ZONE_FLAG_FINISH_SUP |
|
|
DA_ZONE_FLAG_RWP_SUP),
|
|
DA_ZONE_FLAG_URSWRZ = 0x0020,
|
|
DA_ZONE_FLAG_OPT_SEQ_SET = 0x0040,
|
|
DA_ZONE_FLAG_OPT_NONSEQ_SET = 0x0080,
|
|
DA_ZONE_FLAG_MAX_SEQ_SET = 0x0100,
|
|
DA_ZONE_FLAG_SET_MASK = (DA_ZONE_FLAG_OPT_SEQ_SET |
|
|
DA_ZONE_FLAG_OPT_NONSEQ_SET |
|
|
DA_ZONE_FLAG_MAX_SEQ_SET)
|
|
} da_zone_flags;
|
|
|
|
static struct da_zone_desc {
|
|
da_zone_flags value;
|
|
const char *desc;
|
|
} da_zone_desc_table[] = {
|
|
{DA_ZONE_FLAG_RZ_SUP, "Report Zones" },
|
|
{DA_ZONE_FLAG_OPEN_SUP, "Open" },
|
|
{DA_ZONE_FLAG_CLOSE_SUP, "Close" },
|
|
{DA_ZONE_FLAG_FINISH_SUP, "Finish" },
|
|
{DA_ZONE_FLAG_RWP_SUP, "Reset Write Pointer" },
|
|
};
|
|
|
|
typedef void da_delete_func_t (struct cam_periph *periph, union ccb *ccb,
|
|
struct bio *bp);
|
|
static da_delete_func_t da_delete_trim;
|
|
static da_delete_func_t da_delete_unmap;
|
|
static da_delete_func_t da_delete_ws;
|
|
|
|
static const void * da_delete_functions[] = {
|
|
NULL,
|
|
NULL,
|
|
da_delete_trim,
|
|
da_delete_unmap,
|
|
da_delete_ws,
|
|
da_delete_ws,
|
|
da_delete_ws
|
|
};
|
|
|
|
static const char *da_delete_method_names[] =
|
|
{ "NONE", "DISABLE", "ATA_TRIM", "UNMAP", "WS16", "WS10", "ZERO" };
|
|
static const char *da_delete_method_desc[] =
|
|
{ "NONE", "DISABLED", "ATA TRIM", "UNMAP", "WRITE SAME(16) with UNMAP",
|
|
"WRITE SAME(10) with UNMAP", "ZERO" };
|
|
|
|
/* Offsets into our private area for storing information */
|
|
#define ccb_state ppriv_field0
|
|
#define ccb_bp ppriv_ptr1
|
|
|
|
struct disk_params {
|
|
u_int8_t heads;
|
|
u_int32_t cylinders;
|
|
u_int8_t secs_per_track;
|
|
u_int32_t secsize; /* Number of bytes/sector */
|
|
u_int64_t sectors; /* total number sectors */
|
|
u_int stripesize;
|
|
u_int stripeoffset;
|
|
};
|
|
|
|
#define UNMAP_RANGE_MAX 0xffffffff
|
|
#define UNMAP_HEAD_SIZE 8
|
|
#define UNMAP_RANGE_SIZE 16
|
|
#define UNMAP_MAX_RANGES 2048 /* Protocol Max is 4095 */
|
|
#define UNMAP_BUF_SIZE ((UNMAP_MAX_RANGES * UNMAP_RANGE_SIZE) + \
|
|
UNMAP_HEAD_SIZE)
|
|
|
|
#define WS10_MAX_BLKS 0xffff
|
|
#define WS16_MAX_BLKS 0xffffffff
|
|
#define ATA_TRIM_MAX_RANGES ((UNMAP_BUF_SIZE / \
|
|
(ATA_DSM_RANGE_SIZE * ATA_DSM_BLK_SIZE)) * ATA_DSM_BLK_SIZE)
|
|
|
|
#define DA_WORK_TUR (1 << 16)
|
|
|
|
typedef enum {
|
|
DA_REF_OPEN = 1,
|
|
DA_REF_OPEN_HOLD,
|
|
DA_REF_CLOSE_HOLD,
|
|
DA_REF_PROBE_HOLD,
|
|
DA_REF_TUR,
|
|
DA_REF_GEOM,
|
|
DA_REF_SYSCTL,
|
|
DA_REF_REPROBE,
|
|
DA_REF_MAX /* KEEP LAST */
|
|
} da_ref_token;
|
|
|
|
struct da_softc {
|
|
struct cam_iosched_softc *cam_iosched;
|
|
struct bio_queue_head delete_run_queue;
|
|
LIST_HEAD(, ccb_hdr) pending_ccbs;
|
|
int refcount; /* Active xpt_action() calls */
|
|
da_state state;
|
|
da_flags flags;
|
|
da_quirks quirks;
|
|
int minimum_cmd_size;
|
|
int error_inject;
|
|
int trim_max_ranges;
|
|
int delete_available; /* Delete methods possibly available */
|
|
da_zone_mode zone_mode;
|
|
da_zone_interface zone_interface;
|
|
da_zone_flags zone_flags;
|
|
struct ata_gp_log_dir ata_logdir;
|
|
int valid_logdir_len;
|
|
struct ata_identify_log_pages ata_iddir;
|
|
int valid_iddir_len;
|
|
uint64_t optimal_seq_zones;
|
|
uint64_t optimal_nonseq_zones;
|
|
uint64_t max_seq_zones;
|
|
u_int maxio;
|
|
uint32_t unmap_max_ranges;
|
|
uint32_t unmap_max_lba; /* Max LBAs in UNMAP req */
|
|
uint32_t unmap_gran;
|
|
uint32_t unmap_gran_align;
|
|
uint64_t ws_max_blks;
|
|
uint64_t trim_count;
|
|
uint64_t trim_ranges;
|
|
uint64_t trim_lbas;
|
|
da_delete_methods delete_method_pref;
|
|
da_delete_methods delete_method;
|
|
da_delete_func_t *delete_func;
|
|
int unmappedio;
|
|
int rotating;
|
|
int p_type;
|
|
struct disk_params params;
|
|
struct disk *disk;
|
|
union ccb saved_ccb;
|
|
struct task sysctl_task;
|
|
struct sysctl_ctx_list sysctl_ctx;
|
|
struct sysctl_oid *sysctl_tree;
|
|
struct callout sendordered_c;
|
|
uint64_t wwpn;
|
|
uint8_t unmap_buf[UNMAP_BUF_SIZE];
|
|
struct scsi_read_capacity_data_long rcaplong;
|
|
struct callout mediapoll_c;
|
|
int ref_flags[DA_REF_MAX];
|
|
#ifdef CAM_IO_STATS
|
|
struct sysctl_ctx_list sysctl_stats_ctx;
|
|
struct sysctl_oid *sysctl_stats_tree;
|
|
u_int errors;
|
|
u_int timeouts;
|
|
u_int invalidations;
|
|
#endif
|
|
#define DA_ANNOUNCETMP_SZ 160
|
|
char announce_temp[DA_ANNOUNCETMP_SZ];
|
|
#define DA_ANNOUNCE_SZ 400
|
|
char announcebuf[DA_ANNOUNCE_SZ];
|
|
};
|
|
|
|
#define dadeleteflag(softc, delete_method, enable) \
|
|
if (enable) { \
|
|
softc->delete_available |= (1 << delete_method); \
|
|
} else { \
|
|
softc->delete_available &= ~(1 << delete_method); \
|
|
}
|
|
|
|
struct da_quirk_entry {
|
|
struct scsi_inquiry_pattern inq_pat;
|
|
da_quirks quirks;
|
|
};
|
|
|
|
static const char quantum[] = "QUANTUM";
|
|
static const char microp[] = "MICROP";
|
|
|
|
static struct da_quirk_entry da_quirk_table[] =
|
|
{
|
|
/* SPI, FC devices */
|
|
{
|
|
/*
|
|
* Fujitsu M2513A MO drives.
|
|
* Tested devices: M2513A2 firmware versions 1200 & 1300.
|
|
* (dip switch selects whether T_DIRECT or T_OPTICAL device)
|
|
* Reported by: W.Scholten <whs@xs4all.nl>
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "FUJITSU", "M2513A", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/* See above. */
|
|
{T_OPTICAL, SIP_MEDIA_REMOVABLE, "FUJITSU", "M2513A", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* This particular Fujitsu drive doesn't like the
|
|
* synchronize cache command.
|
|
* Reported by: Tom Jackson <toj@gorilla.net>
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "FUJITSU", "M2954*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* This drive doesn't like the synchronize cache command
|
|
* either. Reported by: Matthew Jacob <mjacob@feral.com>
|
|
* in NetBSD PR kern/6027, August 24, 1998.
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, microp, "2217*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* This drive doesn't like the synchronize cache command
|
|
* either. Reported by: Hellmuth Michaelis (hm@kts.org)
|
|
* (PR 8882).
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, microp, "2112*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Doesn't like the synchronize cache command.
|
|
* Reported by: Blaz Zupan <blaz@gold.amis.net>
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "NEC", "D3847*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Doesn't like the synchronize cache command.
|
|
* Reported by: Blaz Zupan <blaz@gold.amis.net>
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, quantum, "MAVERICK 540S", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Doesn't like the synchronize cache command.
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, quantum, "LPS525S", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Doesn't like the synchronize cache command.
|
|
* Reported by: walter@pelissero.de
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, quantum, "LPS540S", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Doesn't work correctly with 6 byte reads/writes.
|
|
* Returns illegal request, and points to byte 9 of the
|
|
* 6-byte CDB.
|
|
* Reported by: Adam McDougall <bsdx@spawnet.com>
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, quantum, "VIKING 4*", "*"},
|
|
/*quirks*/ DA_Q_NO_6_BYTE
|
|
},
|
|
{
|
|
/* See above. */
|
|
{T_DIRECT, SIP_MEDIA_FIXED, quantum, "VIKING 2*", "*"},
|
|
/*quirks*/ DA_Q_NO_6_BYTE
|
|
},
|
|
{
|
|
/*
|
|
* Doesn't like the synchronize cache command.
|
|
* Reported by: walter@pelissero.de
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "CONNER", "CP3500*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* The CISS RAID controllers do not support SYNC_CACHE
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "COMPAQ", "RAID*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* The STEC SSDs sometimes hang on UNMAP.
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "STEC", "*", "*"},
|
|
/*quirks*/ DA_Q_NO_UNMAP
|
|
},
|
|
{
|
|
/*
|
|
* VMware returns BUSY status when storage has transient
|
|
* connectivity problems, so better wait.
|
|
* Also VMware returns odd errors on misaligned UNMAPs.
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "VMware*", "*", "*"},
|
|
/*quirks*/ DA_Q_RETRY_BUSY | DA_Q_STRICT_UNMAP
|
|
},
|
|
/* USB mass storage devices supported by umass(4) */
|
|
{
|
|
/*
|
|
* EXATELECOM (Sigmatel) i-Bead 100/105 USB Flash MP3 Player
|
|
* PR: kern/51675
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "EXATEL", "i-BEAD10*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Power Quotient Int. (PQI) USB flash key
|
|
* PR: kern/53067
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "USB Flash Disk*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Creative Nomad MUVO mp3 player (USB)
|
|
* PR: kern/53094
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "CREATIVE", "NOMAD_MUVO", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT
|
|
},
|
|
{
|
|
/*
|
|
* Jungsoft NEXDISK USB flash key
|
|
* PR: kern/54737
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "JUNGSOFT", "NEXDISK*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* FreeDik USB Mini Data Drive
|
|
* PR: kern/54786
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "FreeDik*", "Mini Data Drive",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Sigmatel USB Flash MP3 Player
|
|
* PR: kern/57046
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "SigmaTel", "MSCN", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT
|
|
},
|
|
{
|
|
/*
|
|
* Neuros USB Digital Audio Computer
|
|
* PR: kern/63645
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "NEUROS", "dig. audio comp.",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* SEAGRAND NP-900 MP3 Player
|
|
* PR: kern/64563
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "SEAGRAND", "NP-900*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT
|
|
},
|
|
{
|
|
/*
|
|
* iRiver iFP MP3 player (with UMS Firmware)
|
|
* PR: kern/54881, i386/63941, kern/66124
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "iRiver", "iFP*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Frontier Labs NEX IA+ Digital Audio Player, rev 1.10/0.01
|
|
* PR: kern/70158
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "FL" , "Nex*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* ZICPlay USB MP3 Player with FM
|
|
* PR: kern/75057
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "ACTIONS*" , "USB DISK*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* TEAC USB floppy mechanisms
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "TEAC" , "FD-05*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Kingston DataTraveler II+ USB Pen-Drive.
|
|
* Reported by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Kingston" , "DataTraveler II+",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* USB DISK Pro PMAP
|
|
* Reported by: jhs
|
|
* PR: usb/96381
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, " ", "USB DISK Pro", "PMAP"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Motorola E398 Mobile Phone (TransFlash memory card).
|
|
* Reported by: Wojciech A. Koszek <dunstan@FreeBSD.czest.pl>
|
|
* PR: usb/89889
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Motorola" , "Motorola Phone",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Qware BeatZkey! Pro
|
|
* PR: usb/79164
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "GENERIC", "USB DISK DEVICE",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Time DPA20B 1GB MP3 Player
|
|
* PR: usb/81846
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "USB2.0*", "(FS) FLASH DISK*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Samsung USB key 128Mb
|
|
* PR: usb/90081
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "USB-DISK", "FreeDik-FlashUsb",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Kingston DataTraveler 2.0 USB Flash memory.
|
|
* PR: usb/89196
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Kingston", "DataTraveler 2.0",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Creative MUVO Slim mp3 player (USB)
|
|
* PR: usb/86131
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "CREATIVE", "MuVo Slim",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT
|
|
},
|
|
{
|
|
/*
|
|
* United MP5512 Portable MP3 Player (2-in-1 USB DISK/MP3)
|
|
* PR: usb/80487
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "MUSIC DISK",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* SanDisk Micro Cruzer 128MB
|
|
* PR: usb/75970
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "SanDisk" , "Micro Cruzer",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* TOSHIBA TransMemory USB sticks
|
|
* PR: kern/94660
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "TOSHIBA", "TransMemory",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* PNY USB 3.0 Flash Drives
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "PNY", "USB 3.0 FD*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_NO_RC16
|
|
},
|
|
{
|
|
/*
|
|
* PNY USB Flash keys
|
|
* PR: usb/75578, usb/72344, usb/65436
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "*" , "USB DISK*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Genesys GL3224
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "STORAGE DEVICE*",
|
|
"120?"}, /*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_4K | DA_Q_NO_RC16
|
|
},
|
|
{
|
|
/*
|
|
* Genesys 6-in-1 Card Reader
|
|
* PR: usb/94647
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "STORAGE DEVICE*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Rekam Digital CAMERA
|
|
* PR: usb/98713
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "CAMERA*", "4MP-9J6*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* iRiver H10 MP3 player
|
|
* PR: usb/102547
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "iriver", "H10*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* iRiver U10 MP3 player
|
|
* PR: usb/92306
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "iriver", "U10*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* X-Micro Flash Disk
|
|
* PR: usb/96901
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "X-Micro", "Flash Disk",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* EasyMP3 EM732X USB 2.0 Flash MP3 Player
|
|
* PR: usb/96546
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "EM732X", "MP3 Player*",
|
|
"1.00"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Denver MP3 player
|
|
* PR: usb/107101
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "DENVER", "MP3 PLAYER",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Philips USB Key Audio KEY013
|
|
* PR: usb/68412
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "PHILIPS", "Key*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_NO_PREVENT
|
|
},
|
|
{
|
|
/*
|
|
* JNC MP3 Player
|
|
* PR: usb/94439
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "JNC*" , "MP3 Player*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* SAMSUNG MP0402H
|
|
* PR: usb/108427
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "MP0402H", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* I/O Magic USB flash - Giga Bank
|
|
* PR: usb/108810
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "GS-Magic", "stor*", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* JoyFly 128mb USB Flash Drive
|
|
* PR: 96133
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "USB 2.0", "Flash Disk*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* ChipsBnk usb stick
|
|
* PR: 103702
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "ChipsBnk", "USB*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Storcase (Kingston) InfoStation IFS FC2/SATA-R 201A
|
|
* PR: 129858
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "IFS", "FC2/SATA-R*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Samsung YP-U3 mp3-player
|
|
* PR: 125398
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Samsung", "YP-U3",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Netac", "OnlyDisk*",
|
|
"2000"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Sony Cyber-Shot DSC cameras
|
|
* PR: usb/137035
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Sony", "Sony DSC", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_NO_PREVENT
|
|
},
|
|
{
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "Kingston", "DataTraveler G3",
|
|
"1.00"}, /*quirks*/ DA_Q_NO_PREVENT
|
|
},
|
|
{
|
|
/* At least several Transcent USB sticks lie on RC16. */
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "JetFlash", "Transcend*",
|
|
"*"}, /*quirks*/ DA_Q_NO_RC16
|
|
},
|
|
{
|
|
/*
|
|
* I-O Data USB Flash Disk
|
|
* PR: usb/211716
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "I-O DATA", "USB Flash Disk*",
|
|
"*"}, /*quirks*/ DA_Q_NO_RC16
|
|
},
|
|
{
|
|
/*
|
|
* SLC CHIPFANCIER USB drives
|
|
* PR: usb/234503 (RC10 right, RC16 wrong)
|
|
* 16GB, 32GB and 128GB confirmed to have same issue
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "*SLC", "CHIPFANCIER",
|
|
"*"}, /*quirks*/ DA_Q_NO_RC16
|
|
},
|
|
/* ATA/SATA devices over SAS/USB/... */
|
|
{
|
|
/* Sandisk X400 */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SanDisk SD8SB8U1*", "*" },
|
|
/*quirks*/DA_Q_128KB
|
|
},
|
|
{
|
|
/* Hitachi Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "Hitachi", "H??????????E3*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Micron Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Micron 5100 MTFDDAK*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Samsung Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG HD155UI*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Samsung Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "HD155UI*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Samsung Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG HD204UI*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Samsung Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "HD204UI*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Barracuda Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST????DL*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Barracuda Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST????DL", "*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Barracuda Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST???DM*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Barracuda Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST???DM*", "*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Barracuda Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST????DM*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Barracuda Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST????DM", "*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9500423AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST950042", "3AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9500424AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST950042", "4AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9640423AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST964042", "3AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9640424AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST964042", "4AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9750420AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST975042", "0AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9750422AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST975042", "2AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9750423AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST975042", "3AS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Thin Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST???LT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* Seagate Momentus Thin Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ST???LT*", "*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD????RS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "??RS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD????RX*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "??RX*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD??????RS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "????RS*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD??????RX*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Caviar Green Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "????RX*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Black Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD???PKT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Black Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "?PKT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Black Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD?????PKT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Black Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "???PKT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Blue Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD???PVT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Blue Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "?PVT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Blue Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD?????PVT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/* WDC Scorpio Blue Advanced Format (4k) drives */
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "???PVT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Olympus digital cameras (C-3040ZOOM, C-2040ZOOM, C-1)
|
|
* PR: usb/97472
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "C*", "*"},
|
|
/*quirks*/ DA_Q_NO_6_BYTE | DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Olympus digital cameras (D-370)
|
|
* PR: usb/97472
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "D*", "*"},
|
|
/*quirks*/ DA_Q_NO_6_BYTE
|
|
},
|
|
{
|
|
/*
|
|
* Olympus digital cameras (E-100RS, E-10).
|
|
* PR: usb/97472
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "E*", "*"},
|
|
/*quirks*/ DA_Q_NO_6_BYTE | DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Olympus FE-210 camera
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "FE210*",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Pentax Digital Camera
|
|
* PR: usb/93389
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "PENTAX", "DIGITAL CAMERA",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* LG UP3S MP3 player
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "LG", "UP3S",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* Laser MP3-2GA13 MP3 player
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_REMOVABLE, "USB 2.0", "(HS) Flash Disk",
|
|
"*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
{
|
|
/*
|
|
* LaCie external 250GB Hard drive des by Porsche
|
|
* Submitted by: Ben Stuyts <ben@altesco.nl>
|
|
* PR: 121474
|
|
*/
|
|
{T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "HM250JI", "*"},
|
|
/*quirks*/ DA_Q_NO_SYNC_CACHE
|
|
},
|
|
/* SATA SSDs */
|
|
{
|
|
/*
|
|
* Corsair Force 2 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Corsair CSSD-F*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Corsair Force 3 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Corsair Force 3*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Corsair Neutron GTX SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Neutron GTX*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Corsair Force GT & GS SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Corsair Force G*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Crucial M4 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "M4-CT???M4SSD2*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Crucial RealSSD C300 SSDs
|
|
* 4k optimised
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "C300-CTFDDAC???MAG*",
|
|
"*" }, /*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Intel 320 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSA2CW*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Intel 330 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2CT*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Intel 510 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2MH*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Intel 520 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2BW*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Intel S3610 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2BX*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Intel X25-M Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSA2M*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Kingston E100 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "KINGSTON SE100S3*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Kingston HyperX 3k SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "KINGSTON SH103S3*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Marvell SSDs (entry taken from OpenSolaris)
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "MARVELL SD88SA02*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* OCZ Agility 2 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-AGILITY2*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* OCZ Agility 3 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ-AGILITY3*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* OCZ Deneva R Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "DENRSTE251M45*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* OCZ Vertex 2 SSDs (inc pro series)
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ?VERTEX2*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* OCZ Vertex 3 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ-VERTEX3*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* OCZ Vertex 4 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ-VERTEX4*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Samsung 750 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 750*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Samsung 830 Series SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG SSD 830 Series*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Samsung 840 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 840*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Samsung 845 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 845*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Samsung 850 SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 850*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Samsung 843T Series SSDs (MZ7WD*)
|
|
* Samsung PM851 Series SSDs (MZ7TE*)
|
|
* Samsung PM853T Series SSDs (MZ7GE*)
|
|
* Samsung SM863 Series SSDs (MZ7KM*)
|
|
* 4k optimised
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG MZ7*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Same as for SAMSUNG MZ7* but enable the quirks for SSD
|
|
* starting with MZ7* too
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "MZ7*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* SuperTalent TeraDrive CT SSDs
|
|
* 4k optimised & trim only works in 4k requests + 4k aligned
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "FTM??CT25H*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* XceedIOPS SATA SSDs
|
|
* 4k optimised
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SG9XCS2D*", "*" },
|
|
/*quirks*/DA_Q_4K
|
|
},
|
|
{
|
|
/*
|
|
* Hama Innostor USB-Stick
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_REMOVABLE, "Innostor", "Innostor*", "*" },
|
|
/*quirks*/DA_Q_NO_RC16
|
|
},
|
|
{
|
|
/*
|
|
* Seagate Lamarr 8TB Shingled Magnetic Recording (SMR)
|
|
* Drive Managed SATA hard drive. This drive doesn't report
|
|
* in firmware that it is a drive managed SMR drive.
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST8000AS000[23]*", "*" },
|
|
/*quirks*/DA_Q_SMR_DM
|
|
},
|
|
{
|
|
/*
|
|
* MX-ES USB Drive by Mach Xtreme
|
|
*/
|
|
{ T_DIRECT, SIP_MEDIA_REMOVABLE, "MX", "MXUB3*", "*"},
|
|
/*quirks*/DA_Q_NO_RC16
|
|
},
|
|
};
|
|
|
|
static disk_strategy_t dastrategy;
|
|
static dumper_t dadump;
|
|
static periph_init_t dainit;
|
|
static void daasync(void *callback_arg, u_int32_t code,
|
|
struct cam_path *path, void *arg);
|
|
static void dasysctlinit(void *context, int pending);
|
|
static int dasysctlsofttimeout(SYSCTL_HANDLER_ARGS);
|
|
static int dacmdsizesysctl(SYSCTL_HANDLER_ARGS);
|
|
static int dadeletemethodsysctl(SYSCTL_HANDLER_ARGS);
|
|
static int dazonemodesysctl(SYSCTL_HANDLER_ARGS);
|
|
static int dazonesupsysctl(SYSCTL_HANDLER_ARGS);
|
|
static int dadeletemaxsysctl(SYSCTL_HANDLER_ARGS);
|
|
static void dadeletemethodset(struct da_softc *softc,
|
|
da_delete_methods delete_method);
|
|
static off_t dadeletemaxsize(struct da_softc *softc,
|
|
da_delete_methods delete_method);
|
|
static void dadeletemethodchoose(struct da_softc *softc,
|
|
da_delete_methods default_method);
|
|
static void daprobedone(struct cam_periph *periph, union ccb *ccb);
|
|
|
|
static periph_ctor_t daregister;
|
|
static periph_dtor_t dacleanup;
|
|
static periph_start_t dastart;
|
|
static periph_oninv_t daoninvalidate;
|
|
static void dazonedone(struct cam_periph *periph, union ccb *ccb);
|
|
static void dadone(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probewp(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_proberc(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probelbp(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probeblklimits(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probebdc(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probeata(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probeatalogdir(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probeataiddir(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probeatasup(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probeatazone(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_probezone(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static void dadone_tur(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
static int daerror(union ccb *ccb, u_int32_t cam_flags,
|
|
u_int32_t sense_flags);
|
|
static void daprevent(struct cam_periph *periph, int action);
|
|
static void dareprobe(struct cam_periph *periph);
|
|
static void dasetgeom(struct cam_periph *periph, uint32_t block_len,
|
|
uint64_t maxsector,
|
|
struct scsi_read_capacity_data_long *rcaplong,
|
|
size_t rcap_size);
|
|
static callout_func_t dasendorderedtag;
|
|
static void dashutdown(void *arg, int howto);
|
|
static callout_func_t damediapoll;
|
|
|
|
#ifndef DA_DEFAULT_POLL_PERIOD
|
|
#define DA_DEFAULT_POLL_PERIOD 3
|
|
#endif
|
|
|
|
#ifndef DA_DEFAULT_TIMEOUT
|
|
#define DA_DEFAULT_TIMEOUT 60 /* Timeout in seconds */
|
|
#endif
|
|
|
|
#ifndef DA_DEFAULT_SOFTTIMEOUT
|
|
#define DA_DEFAULT_SOFTTIMEOUT 0
|
|
#endif
|
|
|
|
#ifndef DA_DEFAULT_RETRY
|
|
#define DA_DEFAULT_RETRY 4
|
|
#endif
|
|
|
|
#ifndef DA_DEFAULT_SEND_ORDERED
|
|
#define DA_DEFAULT_SEND_ORDERED 1
|
|
#endif
|
|
|
|
static int da_poll_period = DA_DEFAULT_POLL_PERIOD;
|
|
static int da_retry_count = DA_DEFAULT_RETRY;
|
|
static int da_default_timeout = DA_DEFAULT_TIMEOUT;
|
|
static sbintime_t da_default_softtimeout = DA_DEFAULT_SOFTTIMEOUT;
|
|
static int da_send_ordered = DA_DEFAULT_SEND_ORDERED;
|
|
static int da_disable_wp_detection = 0;
|
|
|
|
static SYSCTL_NODE(_kern_cam, OID_AUTO, da, CTLFLAG_RD, 0,
|
|
"CAM Direct Access Disk driver");
|
|
SYSCTL_INT(_kern_cam_da, OID_AUTO, poll_period, CTLFLAG_RWTUN,
|
|
&da_poll_period, 0, "Media polling period in seconds");
|
|
SYSCTL_INT(_kern_cam_da, OID_AUTO, retry_count, CTLFLAG_RWTUN,
|
|
&da_retry_count, 0, "Normal I/O retry count");
|
|
SYSCTL_INT(_kern_cam_da, OID_AUTO, default_timeout, CTLFLAG_RWTUN,
|
|
&da_default_timeout, 0, "Normal I/O timeout (in seconds)");
|
|
SYSCTL_INT(_kern_cam_da, OID_AUTO, send_ordered, CTLFLAG_RWTUN,
|
|
&da_send_ordered, 0, "Send Ordered Tags");
|
|
SYSCTL_INT(_kern_cam_da, OID_AUTO, disable_wp_detection, CTLFLAG_RWTUN,
|
|
&da_disable_wp_detection, 0,
|
|
"Disable detection of write-protected disks");
|
|
|
|
SYSCTL_PROC(_kern_cam_da, OID_AUTO, default_softtimeout,
|
|
CTLTYPE_UINT | CTLFLAG_RW, NULL, 0, dasysctlsofttimeout, "I",
|
|
"Soft I/O timeout (ms)");
|
|
TUNABLE_INT64("kern.cam.da.default_softtimeout", &da_default_softtimeout);
|
|
|
|
/*
|
|
* DA_ORDEREDTAG_INTERVAL determines how often, relative
|
|
* to the default timeout, we check to see whether an ordered
|
|
* tagged transaction is appropriate to prevent simple tag
|
|
* starvation. Since we'd like to ensure that there is at least
|
|
* 1/2 of the timeout length left for a starved transaction to
|
|
* complete after we've sent an ordered tag, we must poll at least
|
|
* four times in every timeout period. This takes care of the worst
|
|
* case where a starved transaction starts during an interval that
|
|
* meets the requirement "don't send an ordered tag" test so it takes
|
|
* us two intervals to determine that a tag must be sent.
|
|
*/
|
|
#ifndef DA_ORDEREDTAG_INTERVAL
|
|
#define DA_ORDEREDTAG_INTERVAL 4
|
|
#endif
|
|
|
|
static struct periph_driver dadriver =
|
|
{
|
|
dainit, "da",
|
|
TAILQ_HEAD_INITIALIZER(dadriver.units), /* generation */ 0
|
|
};
|
|
|
|
PERIPHDRIVER_DECLARE(da, dadriver);
|
|
|
|
static MALLOC_DEFINE(M_SCSIDA, "scsi_da", "scsi_da buffers");
|
|
|
|
/*
|
|
* This driver takes out references / holds in well defined pairs, never
|
|
* recursively. These macros / inline functions enforce those rules. They
|
|
* are only enabled with DA_TRACK_REFS or INVARIANTS. If DA_TRACK_REFS is
|
|
* defined to be 2 or larger, the tracking also includes debug printfs.
|
|
*/
|
|
#if defined(DA_TRACK_REFS) || defined(INVARIANTS)
|
|
|
|
#ifndef DA_TRACK_REFS
|
|
#define DA_TRACK_REFS 1
|
|
#endif
|
|
|
|
#if DA_TRACK_REFS > 1
|
|
static const char *da_ref_text[] = {
|
|
"bogus",
|
|
"open",
|
|
"open hold",
|
|
"close hold",
|
|
"reprobe hold",
|
|
"Test Unit Ready",
|
|
"Geom",
|
|
"sysctl",
|
|
"reprobe",
|
|
"max -- also bogus"
|
|
};
|
|
|
|
#define DA_PERIPH_PRINT(periph, msg, args...) \
|
|
CAM_PERIPH_PRINT(periph, msg, ##args)
|
|
#else
|
|
#define DA_PERIPH_PRINT(periph, msg, args...)
|
|
#endif
|
|
|
|
static inline void
|
|
token_sanity(da_ref_token token)
|
|
{
|
|
if ((unsigned)token >= DA_REF_MAX)
|
|
panic("Bad token value passed in %d\n", token);
|
|
}
|
|
|
|
static inline int
|
|
da_periph_hold(struct cam_periph *periph, int priority, da_ref_token token)
|
|
{
|
|
int err = cam_periph_hold(periph, priority);
|
|
|
|
token_sanity(token);
|
|
DA_PERIPH_PRINT(periph, "Holding device %s (%d): %d\n",
|
|
da_ref_text[token], token, err);
|
|
if (err == 0) {
|
|
int cnt;
|
|
struct da_softc *softc = periph->softc;
|
|
|
|
cnt = atomic_fetchadd_int(&softc->ref_flags[token], 1);
|
|
if (cnt != 0)
|
|
panic("Re-holding for reason %d, cnt = %d", token, cnt);
|
|
}
|
|
return (err);
|
|
}
|
|
|
|
static inline void
|
|
da_periph_unhold(struct cam_periph *periph, da_ref_token token)
|
|
{
|
|
int cnt;
|
|
struct da_softc *softc = periph->softc;
|
|
|
|
token_sanity(token);
|
|
DA_PERIPH_PRINT(periph, "Unholding device %s (%d)\n",
|
|
da_ref_text[token], token);
|
|
cnt = atomic_fetchadd_int(&softc->ref_flags[token], -1);
|
|
if (cnt != 1)
|
|
panic("Unholding %d with cnt = %d", token, cnt);
|
|
cam_periph_unhold(periph);
|
|
}
|
|
|
|
static inline int
|
|
da_periph_acquire(struct cam_periph *periph, da_ref_token token)
|
|
{
|
|
int err = cam_periph_acquire(periph);
|
|
|
|
token_sanity(token);
|
|
DA_PERIPH_PRINT(periph, "acquiring device %s (%d): %d\n",
|
|
da_ref_text[token], token, err);
|
|
if (err == 0) {
|
|
int cnt;
|
|
struct da_softc *softc = periph->softc;
|
|
|
|
cnt = atomic_fetchadd_int(&softc->ref_flags[token], 1);
|
|
if (cnt != 0)
|
|
panic("Re-refing for reason %d, cnt = %d", token, cnt);
|
|
}
|
|
return (err);
|
|
}
|
|
|
|
static inline void
|
|
da_periph_release(struct cam_periph *periph, da_ref_token token)
|
|
{
|
|
int cnt;
|
|
struct da_softc *softc = periph->softc;
|
|
|
|
token_sanity(token);
|
|
DA_PERIPH_PRINT(periph, "releasing device %s (%d)\n",
|
|
da_ref_text[token], token);
|
|
cnt = atomic_fetchadd_int(&softc->ref_flags[token], -1);
|
|
if (cnt != 1)
|
|
panic("Releasing %d with cnt = %d", token, cnt);
|
|
cam_periph_release(periph);
|
|
}
|
|
|
|
static inline void
|
|
da_periph_release_locked(struct cam_periph *periph, da_ref_token token)
|
|
{
|
|
int cnt;
|
|
struct da_softc *softc = periph->softc;
|
|
|
|
token_sanity(token);
|
|
DA_PERIPH_PRINT(periph, "releasing device (locked) %s (%d)\n",
|
|
da_ref_text[token], token);
|
|
cnt = atomic_fetchadd_int(&softc->ref_flags[token], -1);
|
|
if (cnt != 1)
|
|
panic("releasing (locked) %d with cnt = %d", token, cnt);
|
|
cam_periph_release_locked(periph);
|
|
}
|
|
|
|
#define cam_periph_hold POISON
|
|
#define cam_periph_unhold POISON
|
|
#define cam_periph_acquire POISON
|
|
#define cam_periph_release POISON
|
|
#define cam_periph_release_locked POISON
|
|
|
|
#else
|
|
#define da_periph_hold(periph, prio, token) cam_periph_hold((periph), (prio))
|
|
#define da_periph_unhold(periph, token) cam_periph_unhold((periph))
|
|
#define da_periph_acquire(periph, token) cam_periph_acquire((periph))
|
|
#define da_periph_release(periph, token) cam_periph_release((periph))
|
|
#define da_periph_release_locked(periph, token) cam_periph_release_locked((periph))
|
|
#endif
|
|
|
|
static int
|
|
daopen(struct disk *dp)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct da_softc *softc;
|
|
int error;
|
|
|
|
periph = (struct cam_periph *)dp->d_drv1;
|
|
if (da_periph_acquire(periph, DA_REF_OPEN) != 0) {
|
|
return (ENXIO);
|
|
}
|
|
|
|
cam_periph_lock(periph);
|
|
if ((error = da_periph_hold(periph, PRIBIO|PCATCH, DA_REF_OPEN_HOLD)) != 0) {
|
|
cam_periph_unlock(periph);
|
|
da_periph_release(periph, DA_REF_OPEN);
|
|
return (error);
|
|
}
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH,
|
|
("daopen\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
dareprobe(periph);
|
|
|
|
/* Wait for the disk size update. */
|
|
error = cam_periph_sleep(periph, &softc->disk->d_mediasize, PRIBIO,
|
|
"dareprobe", 0);
|
|
if (error != 0)
|
|
xpt_print(periph->path, "unable to retrieve capacity data\n");
|
|
|
|
if (periph->flags & CAM_PERIPH_INVALID)
|
|
error = ENXIO;
|
|
|
|
if (error == 0 && (softc->flags & DA_FLAG_PACK_REMOVABLE) != 0 &&
|
|
(softc->quirks & DA_Q_NO_PREVENT) == 0)
|
|
daprevent(periph, PR_PREVENT);
|
|
|
|
if (error == 0) {
|
|
softc->flags &= ~DA_FLAG_PACK_INVALID;
|
|
softc->flags |= DA_FLAG_OPEN;
|
|
}
|
|
|
|
da_periph_unhold(periph, DA_REF_OPEN_HOLD);
|
|
cam_periph_unlock(periph);
|
|
|
|
if (error != 0)
|
|
da_periph_release(periph, DA_REF_OPEN);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
daclose(struct disk *dp)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct da_softc *softc;
|
|
union ccb *ccb;
|
|
|
|
periph = (struct cam_periph *)dp->d_drv1;
|
|
softc = (struct da_softc *)periph->softc;
|
|
cam_periph_lock(periph);
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH,
|
|
("daclose\n"));
|
|
|
|
if (da_periph_hold(periph, PRIBIO, DA_REF_CLOSE_HOLD) == 0) {
|
|
|
|
/* Flush disk cache. */
|
|
if ((softc->flags & DA_FLAG_DIRTY) != 0 &&
|
|
(softc->quirks & DA_Q_NO_SYNC_CACHE) == 0 &&
|
|
(softc->flags & DA_FLAG_PACK_INVALID) == 0) {
|
|
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
|
|
scsi_synchronize_cache(&ccb->csio, /*retries*/1,
|
|
/*cbfcnp*/NULL, MSG_SIMPLE_Q_TAG,
|
|
/*begin_lba*/0, /*lb_count*/0, SSD_FULL_SIZE,
|
|
5 * 60 * 1000);
|
|
cam_periph_runccb(ccb, daerror, /*cam_flags*/0,
|
|
/*sense_flags*/SF_RETRY_UA | SF_QUIET_IR,
|
|
softc->disk->d_devstat);
|
|
softc->flags &= ~DA_FLAG_DIRTY;
|
|
xpt_release_ccb(ccb);
|
|
}
|
|
|
|
/* Allow medium removal. */
|
|
if ((softc->flags & DA_FLAG_PACK_REMOVABLE) != 0 &&
|
|
(softc->quirks & DA_Q_NO_PREVENT) == 0)
|
|
daprevent(periph, PR_ALLOW);
|
|
|
|
da_periph_unhold(periph, DA_REF_CLOSE_HOLD);
|
|
}
|
|
|
|
/*
|
|
* If we've got removable media, mark the blocksize as
|
|
* unavailable, since it could change when new media is
|
|
* inserted.
|
|
*/
|
|
if ((softc->flags & DA_FLAG_PACK_REMOVABLE) != 0)
|
|
softc->disk->d_devstat->flags |= DEVSTAT_BS_UNAVAILABLE;
|
|
|
|
softc->flags &= ~DA_FLAG_OPEN;
|
|
while (softc->refcount != 0)
|
|
cam_periph_sleep(periph, &softc->refcount, PRIBIO, "daclose", 1);
|
|
cam_periph_unlock(periph);
|
|
da_periph_release(periph, DA_REF_OPEN);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
daschedule(struct cam_periph *periph)
|
|
{
|
|
struct da_softc *softc = (struct da_softc *)periph->softc;
|
|
|
|
if (softc->state != DA_STATE_NORMAL)
|
|
return;
|
|
|
|
cam_iosched_schedule(softc->cam_iosched, periph);
|
|
}
|
|
|
|
/*
|
|
* Actually translate the requested transfer into one the physical driver
|
|
* can understand. The transfer is described by a buf and will include
|
|
* only one physical transfer.
|
|
*/
|
|
static void
|
|
dastrategy(struct bio *bp)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct da_softc *softc;
|
|
|
|
periph = (struct cam_periph *)bp->bio_disk->d_drv1;
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
cam_periph_lock(periph);
|
|
|
|
/*
|
|
* If the device has been made invalid, error out
|
|
*/
|
|
if ((softc->flags & DA_FLAG_PACK_INVALID)) {
|
|
cam_periph_unlock(periph);
|
|
biofinish(bp, NULL, ENXIO);
|
|
return;
|
|
}
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dastrategy(%p)\n", bp));
|
|
|
|
/*
|
|
* Zone commands must be ordered, because they can depend on the
|
|
* effects of previously issued commands, and they may affect
|
|
* commands after them.
|
|
*/
|
|
if (bp->bio_cmd == BIO_ZONE)
|
|
bp->bio_flags |= BIO_ORDERED;
|
|
|
|
/*
|
|
* Place it in the queue of disk activities for this disk
|
|
*/
|
|
cam_iosched_queue_work(softc->cam_iosched, bp);
|
|
|
|
/*
|
|
* Schedule ourselves for performing the work.
|
|
*/
|
|
daschedule(periph);
|
|
cam_periph_unlock(periph);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
dadump(void *arg, void *virtual, vm_offset_t physical, off_t offset, size_t length)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct da_softc *softc;
|
|
u_int secsize;
|
|
struct ccb_scsiio csio;
|
|
struct disk *dp;
|
|
int error = 0;
|
|
|
|
dp = arg;
|
|
periph = dp->d_drv1;
|
|
softc = (struct da_softc *)periph->softc;
|
|
secsize = softc->params.secsize;
|
|
|
|
if ((softc->flags & DA_FLAG_PACK_INVALID) != 0)
|
|
return (ENXIO);
|
|
|
|
memset(&csio, 0, sizeof(csio));
|
|
if (length > 0) {
|
|
xpt_setup_ccb(&csio.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
|
|
csio.ccb_h.ccb_state = DA_CCB_DUMP;
|
|
scsi_read_write(&csio,
|
|
/*retries*/0,
|
|
/*cbfcnp*/NULL,
|
|
MSG_ORDERED_Q_TAG,
|
|
/*read*/SCSI_RW_WRITE,
|
|
/*byte2*/0,
|
|
/*minimum_cmd_size*/ softc->minimum_cmd_size,
|
|
offset / secsize,
|
|
length / secsize,
|
|
/*data_ptr*/(u_int8_t *) virtual,
|
|
/*dxfer_len*/length,
|
|
/*sense_len*/SSD_FULL_SIZE,
|
|
da_default_timeout * 1000);
|
|
error = cam_periph_runccb((union ccb *)&csio, cam_periph_error,
|
|
0, SF_NO_RECOVERY | SF_NO_RETRY, NULL);
|
|
if (error != 0)
|
|
printf("Aborting dump due to I/O error.\n");
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Sync the disk cache contents to the physical media.
|
|
*/
|
|
if ((softc->quirks & DA_Q_NO_SYNC_CACHE) == 0) {
|
|
|
|
xpt_setup_ccb(&csio.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
|
|
csio.ccb_h.ccb_state = DA_CCB_DUMP;
|
|
scsi_synchronize_cache(&csio,
|
|
/*retries*/0,
|
|
/*cbfcnp*/NULL,
|
|
MSG_SIMPLE_Q_TAG,
|
|
/*begin_lba*/0,/* Cover the whole disk */
|
|
/*lb_count*/0,
|
|
SSD_FULL_SIZE,
|
|
5 * 1000);
|
|
error = cam_periph_runccb((union ccb *)&csio, cam_periph_error,
|
|
0, SF_NO_RECOVERY | SF_NO_RETRY, NULL);
|
|
if (error != 0)
|
|
xpt_print(periph->path, "Synchronize cache failed\n");
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
dagetattr(struct bio *bp)
|
|
{
|
|
int ret;
|
|
struct cam_periph *periph;
|
|
|
|
periph = (struct cam_periph *)bp->bio_disk->d_drv1;
|
|
cam_periph_lock(periph);
|
|
ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute,
|
|
periph->path);
|
|
cam_periph_unlock(periph);
|
|
if (ret == 0)
|
|
bp->bio_completed = bp->bio_length;
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
dainit(void)
|
|
{
|
|
cam_status status;
|
|
|
|
/*
|
|
* Install a global async callback. This callback will
|
|
* receive async callbacks like "new device found".
|
|
*/
|
|
status = xpt_register_async(AC_FOUND_DEVICE, daasync, NULL, NULL);
|
|
|
|
if (status != CAM_REQ_CMP) {
|
|
printf("da: Failed to attach master async callback "
|
|
"due to status 0x%x!\n", status);
|
|
} else if (da_send_ordered) {
|
|
|
|
/* Register our shutdown event handler */
|
|
if ((EVENTHANDLER_REGISTER(shutdown_post_sync, dashutdown,
|
|
NULL, SHUTDOWN_PRI_DEFAULT)) == NULL)
|
|
printf("dainit: shutdown event registration failed!\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Callback from GEOM, called when it has finished cleaning up its
|
|
* resources.
|
|
*/
|
|
static void
|
|
dadiskgonecb(struct disk *dp)
|
|
{
|
|
struct cam_periph *periph;
|
|
|
|
periph = (struct cam_periph *)dp->d_drv1;
|
|
da_periph_release(periph, DA_REF_GEOM);
|
|
}
|
|
|
|
static void
|
|
daoninvalidate(struct cam_periph *periph)
|
|
{
|
|
struct da_softc *softc;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
/*
|
|
* De-register any async callbacks.
|
|
*/
|
|
xpt_register_async(0, daasync, periph, periph->path);
|
|
|
|
softc->flags |= DA_FLAG_PACK_INVALID;
|
|
#ifdef CAM_IO_STATS
|
|
softc->invalidations++;
|
|
#endif
|
|
|
|
/*
|
|
* Return all queued I/O with ENXIO.
|
|
* XXX Handle any transactions queued to the card
|
|
* with XPT_ABORT_CCB.
|
|
*/
|
|
cam_iosched_flush(softc->cam_iosched, NULL, ENXIO);
|
|
|
|
/*
|
|
* Tell GEOM that we've gone away, we'll get a callback when it is
|
|
* done cleaning up its resources.
|
|
*/
|
|
disk_gone(softc->disk);
|
|
}
|
|
|
|
static void
|
|
dacleanup(struct cam_periph *periph)
|
|
{
|
|
struct da_softc *softc;
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
cam_periph_unlock(periph);
|
|
|
|
cam_iosched_fini(softc->cam_iosched);
|
|
|
|
/*
|
|
* If we can't free the sysctl tree, oh well...
|
|
*/
|
|
if ((softc->flags & DA_FLAG_SCTX_INIT) != 0) {
|
|
#ifdef CAM_IO_STATS
|
|
if (sysctl_ctx_free(&softc->sysctl_stats_ctx) != 0)
|
|
xpt_print(periph->path,
|
|
"can't remove sysctl stats context\n");
|
|
#endif
|
|
if (sysctl_ctx_free(&softc->sysctl_ctx) != 0)
|
|
xpt_print(periph->path,
|
|
"can't remove sysctl context\n");
|
|
}
|
|
|
|
callout_drain(&softc->mediapoll_c);
|
|
disk_destroy(softc->disk);
|
|
callout_drain(&softc->sendordered_c);
|
|
free(softc, M_DEVBUF);
|
|
cam_periph_lock(periph);
|
|
}
|
|
|
|
static void
|
|
daasync(void *callback_arg, u_int32_t code,
|
|
struct cam_path *path, void *arg)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct da_softc *softc;
|
|
|
|
periph = (struct cam_periph *)callback_arg;
|
|
switch (code) {
|
|
case AC_FOUND_DEVICE: /* callback to create periph, no locking yet */
|
|
{
|
|
struct ccb_getdev *cgd;
|
|
cam_status status;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
if (cgd == NULL)
|
|
break;
|
|
|
|
if (cgd->protocol != PROTO_SCSI)
|
|
break;
|
|
if (SID_QUAL(&cgd->inq_data) != SID_QUAL_LU_CONNECTED)
|
|
break;
|
|
if (SID_TYPE(&cgd->inq_data) != T_DIRECT
|
|
&& SID_TYPE(&cgd->inq_data) != T_RBC
|
|
&& SID_TYPE(&cgd->inq_data) != T_OPTICAL
|
|
&& SID_TYPE(&cgd->inq_data) != T_ZBC_HM)
|
|
break;
|
|
|
|
/*
|
|
* Allocate a peripheral instance for
|
|
* this device and start the probe
|
|
* process.
|
|
*/
|
|
status = cam_periph_alloc(daregister, daoninvalidate,
|
|
dacleanup, dastart,
|
|
"da", CAM_PERIPH_BIO,
|
|
path, daasync,
|
|
AC_FOUND_DEVICE, cgd);
|
|
|
|
if (status != CAM_REQ_CMP
|
|
&& status != CAM_REQ_INPROG)
|
|
printf("daasync: Unable to attach to new device "
|
|
"due to status 0x%x\n", status);
|
|
return;
|
|
}
|
|
case AC_ADVINFO_CHANGED: /* Doesn't touch periph */
|
|
{
|
|
uintptr_t buftype;
|
|
|
|
buftype = (uintptr_t)arg;
|
|
if (buftype == CDAI_TYPE_PHYS_PATH) {
|
|
struct da_softc *softc;
|
|
|
|
softc = periph->softc;
|
|
disk_attr_changed(softc->disk, "GEOM::physpath",
|
|
M_NOWAIT);
|
|
}
|
|
break;
|
|
}
|
|
case AC_UNIT_ATTENTION:
|
|
{
|
|
union ccb *ccb;
|
|
int error_code, sense_key, asc, ascq;
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
ccb = (union ccb *)arg;
|
|
|
|
/*
|
|
* Handle all UNIT ATTENTIONs except our own, as they will be
|
|
* handled by daerror(). Since this comes from a different periph,
|
|
* that periph's lock is held, not ours, so we have to take it ours
|
|
* out to touch softc flags.
|
|
*/
|
|
if (xpt_path_periph(ccb->ccb_h.path) != periph &&
|
|
scsi_extract_sense_ccb(ccb,
|
|
&error_code, &sense_key, &asc, &ascq)) {
|
|
if (asc == 0x2A && ascq == 0x09) {
|
|
xpt_print(ccb->ccb_h.path,
|
|
"Capacity data has changed\n");
|
|
cam_periph_lock(periph);
|
|
softc->flags &= ~DA_FLAG_PROBED;
|
|
dareprobe(periph);
|
|
cam_periph_unlock(periph);
|
|
} else if (asc == 0x28 && ascq == 0x00) {
|
|
cam_periph_lock(periph);
|
|
softc->flags &= ~DA_FLAG_PROBED;
|
|
cam_periph_unlock(periph);
|
|
disk_media_changed(softc->disk, M_NOWAIT);
|
|
} else if (asc == 0x3F && ascq == 0x03) {
|
|
xpt_print(ccb->ccb_h.path,
|
|
"INQUIRY data has changed\n");
|
|
cam_periph_lock(periph);
|
|
softc->flags &= ~DA_FLAG_PROBED;
|
|
dareprobe(periph);
|
|
cam_periph_unlock(periph);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case AC_SCSI_AEN: /* Called for this path: periph locked */
|
|
/*
|
|
* Appears to be currently unused for SCSI devices, only ata SIMs
|
|
* generate this.
|
|
*/
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
softc = (struct da_softc *)periph->softc;
|
|
if (!cam_iosched_has_work_flags(softc->cam_iosched, DA_WORK_TUR) &&
|
|
(softc->flags & DA_FLAG_TUR_PENDING) == 0) {
|
|
if (da_periph_acquire(periph, DA_REF_TUR) == 0) {
|
|
cam_iosched_set_work_flags(softc->cam_iosched, DA_WORK_TUR);
|
|
daschedule(periph);
|
|
}
|
|
}
|
|
/* FALLTHROUGH */
|
|
case AC_SENT_BDR: /* Called for this path: periph locked */
|
|
case AC_BUS_RESET: /* Called for this path: periph locked */
|
|
{
|
|
struct ccb_hdr *ccbh;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
softc = (struct da_softc *)periph->softc;
|
|
/*
|
|
* Don't fail on the expected unit attention
|
|
* that will occur.
|
|
*/
|
|
softc->flags |= DA_FLAG_RETRY_UA;
|
|
LIST_FOREACH(ccbh, &softc->pending_ccbs, periph_links.le)
|
|
ccbh->ccb_state |= DA_CCB_RETRY_UA;
|
|
break;
|
|
}
|
|
case AC_INQ_CHANGED: /* Called for this path: periph locked */
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
softc = (struct da_softc *)periph->softc;
|
|
softc->flags &= ~DA_FLAG_PROBED;
|
|
dareprobe(periph);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
cam_periph_async(periph, code, path, arg);
|
|
}
|
|
|
|
static void
|
|
dasysctlinit(void *context, int pending)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct da_softc *softc;
|
|
char tmpstr[32], tmpstr2[16];
|
|
struct ccb_trans_settings cts;
|
|
|
|
periph = (struct cam_periph *)context;
|
|
/*
|
|
* periph was held for us when this task was enqueued
|
|
*/
|
|
if (periph->flags & CAM_PERIPH_INVALID) {
|
|
da_periph_release(periph, DA_REF_SYSCTL);
|
|
return;
|
|
}
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
snprintf(tmpstr, sizeof(tmpstr), "CAM DA unit %d", periph->unit_number);
|
|
snprintf(tmpstr2, sizeof(tmpstr2), "%d", periph->unit_number);
|
|
|
|
sysctl_ctx_init(&softc->sysctl_ctx);
|
|
cam_periph_lock(periph);
|
|
softc->flags |= DA_FLAG_SCTX_INIT;
|
|
cam_periph_unlock(periph);
|
|
softc->sysctl_tree = SYSCTL_ADD_NODE_WITH_LABEL(&softc->sysctl_ctx,
|
|
SYSCTL_STATIC_CHILDREN(_kern_cam_da), OID_AUTO, tmpstr2,
|
|
CTLFLAG_RD, 0, tmpstr, "device_index");
|
|
if (softc->sysctl_tree == NULL) {
|
|
printf("dasysctlinit: unable to allocate sysctl tree\n");
|
|
da_periph_release(periph, DA_REF_SYSCTL);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Now register the sysctl handler, so the user can change the value on
|
|
* the fly.
|
|
*/
|
|
SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO, "delete_method", CTLTYPE_STRING | CTLFLAG_RWTUN,
|
|
softc, 0, dadeletemethodsysctl, "A",
|
|
"BIO_DELETE execution method");
|
|
SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO, "delete_max", CTLTYPE_U64 | CTLFLAG_RW,
|
|
softc, 0, dadeletemaxsysctl, "Q",
|
|
"Maximum BIO_DELETE size");
|
|
SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO, "minimum_cmd_size", CTLTYPE_INT | CTLFLAG_RW,
|
|
&softc->minimum_cmd_size, 0, dacmdsizesysctl, "I",
|
|
"Minimum CDB size");
|
|
SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
|
|
"trim_count", CTLFLAG_RD, &softc->trim_count,
|
|
"Total number of unmap/dsm commands sent");
|
|
SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
|
|
"trim_ranges", CTLFLAG_RD, &softc->trim_ranges,
|
|
"Total number of ranges in unmap/dsm commands");
|
|
SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
|
|
"trim_lbas", CTLFLAG_RD, &softc->trim_lbas,
|
|
"Total lbas in the unmap/dsm commands sent");
|
|
|
|
SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO, "zone_mode", CTLTYPE_STRING | CTLFLAG_RD,
|
|
softc, 0, dazonemodesysctl, "A",
|
|
"Zone Mode");
|
|
SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO, "zone_support", CTLTYPE_STRING | CTLFLAG_RD,
|
|
softc, 0, dazonesupsysctl, "A",
|
|
"Zone Support");
|
|
SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
|
|
"optimal_seq_zones", CTLFLAG_RD, &softc->optimal_seq_zones,
|
|
"Optimal Number of Open Sequential Write Preferred Zones");
|
|
SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
|
|
"optimal_nonseq_zones", CTLFLAG_RD,
|
|
&softc->optimal_nonseq_zones,
|
|
"Optimal Number of Non-Sequentially Written Sequential Write "
|
|
"Preferred Zones");
|
|
SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
|
|
"max_seq_zones", CTLFLAG_RD, &softc->max_seq_zones,
|
|
"Maximum Number of Open Sequential Write Required Zones");
|
|
|
|
SYSCTL_ADD_INT(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO,
|
|
"error_inject",
|
|
CTLFLAG_RW,
|
|
&softc->error_inject,
|
|
0,
|
|
"error_inject leaf");
|
|
|
|
SYSCTL_ADD_INT(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO,
|
|
"unmapped_io",
|
|
CTLFLAG_RD,
|
|
&softc->unmappedio,
|
|
0,
|
|
"Unmapped I/O support");
|
|
|
|
SYSCTL_ADD_INT(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO,
|
|
"rotating",
|
|
CTLFLAG_RD,
|
|
&softc->rotating,
|
|
0,
|
|
"Rotating media");
|
|
|
|
SYSCTL_ADD_INT(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO,
|
|
"p_type",
|
|
CTLFLAG_RD,
|
|
&softc->p_type,
|
|
0,
|
|
"DIF protection type");
|
|
|
|
#ifdef CAM_TEST_FAILURE
|
|
SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO, "invalidate", CTLTYPE_U64 | CTLFLAG_RW | CTLFLAG_MPSAFE,
|
|
periph, 0, cam_periph_invalidate_sysctl, "I",
|
|
"Write 1 to invalidate the drive immediately");
|
|
#endif
|
|
|
|
/*
|
|
* Add some addressing info.
|
|
*/
|
|
memset(&cts, 0, sizeof (cts));
|
|
xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE);
|
|
cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
|
|
cts.type = CTS_TYPE_CURRENT_SETTINGS;
|
|
cam_periph_lock(periph);
|
|
xpt_action((union ccb *)&cts);
|
|
cam_periph_unlock(periph);
|
|
if (cts.ccb_h.status != CAM_REQ_CMP) {
|
|
da_periph_release(periph, DA_REF_SYSCTL);
|
|
return;
|
|
}
|
|
if (cts.protocol == PROTO_SCSI && cts.transport == XPORT_FC) {
|
|
struct ccb_trans_settings_fc *fc = &cts.xport_specific.fc;
|
|
if (fc->valid & CTS_FC_VALID_WWPN) {
|
|
softc->wwpn = fc->wwpn;
|
|
SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree),
|
|
OID_AUTO, "wwpn", CTLFLAG_RD,
|
|
&softc->wwpn, "World Wide Port Name");
|
|
}
|
|
}
|
|
|
|
#ifdef CAM_IO_STATS
|
|
/*
|
|
* Now add some useful stats.
|
|
* XXX These should live in cam_periph and be common to all periphs
|
|
*/
|
|
softc->sysctl_stats_tree = SYSCTL_ADD_NODE(&softc->sysctl_stats_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "stats",
|
|
CTLFLAG_RD, 0, "Statistics");
|
|
SYSCTL_ADD_INT(&softc->sysctl_stats_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_stats_tree),
|
|
OID_AUTO,
|
|
"errors",
|
|
CTLFLAG_RD,
|
|
&softc->errors,
|
|
0,
|
|
"Transport errors reported by the SIM");
|
|
SYSCTL_ADD_INT(&softc->sysctl_stats_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_stats_tree),
|
|
OID_AUTO,
|
|
"timeouts",
|
|
CTLFLAG_RD,
|
|
&softc->timeouts,
|
|
0,
|
|
"Device timeouts reported by the SIM");
|
|
SYSCTL_ADD_INT(&softc->sysctl_stats_ctx,
|
|
SYSCTL_CHILDREN(softc->sysctl_stats_tree),
|
|
OID_AUTO,
|
|
"pack_invalidations",
|
|
CTLFLAG_RD,
|
|
&softc->invalidations,
|
|
0,
|
|
"Device pack invalidations");
|
|
#endif
|
|
|
|
cam_iosched_sysctl_init(softc->cam_iosched, &softc->sysctl_ctx,
|
|
softc->sysctl_tree);
|
|
|
|
da_periph_release(periph, DA_REF_SYSCTL);
|
|
}
|
|
|
|
static int
|
|
dadeletemaxsysctl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
uint64_t value;
|
|
struct da_softc *softc;
|
|
|
|
softc = (struct da_softc *)arg1;
|
|
|
|
value = softc->disk->d_delmaxsize;
|
|
error = sysctl_handle_64(oidp, &value, 0, req);
|
|
if ((error != 0) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* only accept values smaller than the calculated value */
|
|
if (value > dadeletemaxsize(softc, softc->delete_method)) {
|
|
return (EINVAL);
|
|
}
|
|
softc->disk->d_delmaxsize = value;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
dacmdsizesysctl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error, value;
|
|
|
|
value = *(int *)arg1;
|
|
|
|
error = sysctl_handle_int(oidp, &value, 0, req);
|
|
|
|
if ((error != 0)
|
|
|| (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/*
|
|
* Acceptable values here are 6, 10, 12 or 16.
|
|
*/
|
|
if (value < 6)
|
|
value = 6;
|
|
else if ((value > 6)
|
|
&& (value <= 10))
|
|
value = 10;
|
|
else if ((value > 10)
|
|
&& (value <= 12))
|
|
value = 12;
|
|
else if (value > 12)
|
|
value = 16;
|
|
|
|
*(int *)arg1 = value;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
dasysctlsofttimeout(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
sbintime_t value;
|
|
int error;
|
|
|
|
value = da_default_softtimeout / SBT_1MS;
|
|
|
|
error = sysctl_handle_int(oidp, (int *)&value, 0, req);
|
|
if ((error != 0) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* XXX Should clip this to a reasonable level */
|
|
if (value > da_default_timeout * 1000)
|
|
return (EINVAL);
|
|
|
|
da_default_softtimeout = value * SBT_1MS;
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
dadeletemethodset(struct da_softc *softc, da_delete_methods delete_method)
|
|
{
|
|
|
|
softc->delete_method = delete_method;
|
|
softc->disk->d_delmaxsize = dadeletemaxsize(softc, delete_method);
|
|
softc->delete_func = da_delete_functions[delete_method];
|
|
|
|
if (softc->delete_method > DA_DELETE_DISABLE)
|
|
softc->disk->d_flags |= DISKFLAG_CANDELETE;
|
|
else
|
|
softc->disk->d_flags &= ~DISKFLAG_CANDELETE;
|
|
}
|
|
|
|
static off_t
|
|
dadeletemaxsize(struct da_softc *softc, da_delete_methods delete_method)
|
|
{
|
|
off_t sectors;
|
|
|
|
switch(delete_method) {
|
|
case DA_DELETE_UNMAP:
|
|
sectors = (off_t)softc->unmap_max_lba;
|
|
break;
|
|
case DA_DELETE_ATA_TRIM:
|
|
sectors = (off_t)ATA_DSM_RANGE_MAX * softc->trim_max_ranges;
|
|
break;
|
|
case DA_DELETE_WS16:
|
|
sectors = omin(softc->ws_max_blks, WS16_MAX_BLKS);
|
|
break;
|
|
case DA_DELETE_ZERO:
|
|
case DA_DELETE_WS10:
|
|
sectors = omin(softc->ws_max_blks, WS10_MAX_BLKS);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
return (off_t)softc->params.secsize *
|
|
omin(sectors, softc->params.sectors);
|
|
}
|
|
|
|
static void
|
|
daprobedone(struct cam_periph *periph, union ccb *ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
dadeletemethodchoose(softc, DA_DELETE_NONE);
|
|
|
|
if (bootverbose && (softc->flags & DA_FLAG_ANNOUNCED) == 0) {
|
|
char buf[80];
|
|
int i, sep;
|
|
|
|
snprintf(buf, sizeof(buf), "Delete methods: <");
|
|
sep = 0;
|
|
for (i = 0; i <= DA_DELETE_MAX; i++) {
|
|
if ((softc->delete_available & (1 << i)) == 0 &&
|
|
i != softc->delete_method)
|
|
continue;
|
|
if (sep)
|
|
strlcat(buf, ",", sizeof(buf));
|
|
strlcat(buf, da_delete_method_names[i],
|
|
sizeof(buf));
|
|
if (i == softc->delete_method)
|
|
strlcat(buf, "(*)", sizeof(buf));
|
|
sep = 1;
|
|
}
|
|
strlcat(buf, ">", sizeof(buf));
|
|
printf("%s%d: %s\n", periph->periph_name,
|
|
periph->unit_number, buf);
|
|
}
|
|
if ((softc->disk->d_flags & DISKFLAG_WRITE_PROTECT) != 0 &&
|
|
(softc->flags & DA_FLAG_ANNOUNCED) == 0) {
|
|
printf("%s%d: Write Protected\n", periph->periph_name,
|
|
periph->unit_number);
|
|
}
|
|
|
|
/*
|
|
* Since our peripheral may be invalidated by an error
|
|
* above or an external event, we must release our CCB
|
|
* before releasing the probe lock on the peripheral.
|
|
* The peripheral will only go away once the last lock
|
|
* is removed, and we need it around for the CCB release
|
|
* operation.
|
|
*/
|
|
xpt_release_ccb(ccb);
|
|
softc->state = DA_STATE_NORMAL;
|
|
softc->flags |= DA_FLAG_PROBED;
|
|
daschedule(periph);
|
|
wakeup(&softc->disk->d_mediasize);
|
|
if ((softc->flags & DA_FLAG_ANNOUNCED) == 0) {
|
|
softc->flags |= DA_FLAG_ANNOUNCED;
|
|
da_periph_unhold(periph, DA_REF_PROBE_HOLD);
|
|
} else
|
|
da_periph_release_locked(periph, DA_REF_REPROBE);
|
|
}
|
|
|
|
static void
|
|
dadeletemethodchoose(struct da_softc *softc, da_delete_methods default_method)
|
|
{
|
|
int i, methods;
|
|
|
|
/* If available, prefer the method requested by user. */
|
|
i = softc->delete_method_pref;
|
|
methods = softc->delete_available | (1 << DA_DELETE_DISABLE);
|
|
if (methods & (1 << i)) {
|
|
dadeletemethodset(softc, i);
|
|
return;
|
|
}
|
|
|
|
/* Use the pre-defined order to choose the best performing delete. */
|
|
for (i = DA_DELETE_MIN; i <= DA_DELETE_MAX; i++) {
|
|
if (i == DA_DELETE_ZERO)
|
|
continue;
|
|
if (softc->delete_available & (1 << i)) {
|
|
dadeletemethodset(softc, i);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Fallback to default. */
|
|
dadeletemethodset(softc, default_method);
|
|
}
|
|
|
|
static int
|
|
dadeletemethodsysctl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
char buf[16];
|
|
const char *p;
|
|
struct da_softc *softc;
|
|
int i, error, value;
|
|
|
|
softc = (struct da_softc *)arg1;
|
|
|
|
value = softc->delete_method;
|
|
if (value < 0 || value > DA_DELETE_MAX)
|
|
p = "UNKNOWN";
|
|
else
|
|
p = da_delete_method_names[value];
|
|
strncpy(buf, p, sizeof(buf));
|
|
error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
|
|
if (error != 0 || req->newptr == NULL)
|
|
return (error);
|
|
for (i = 0; i <= DA_DELETE_MAX; i++) {
|
|
if (strcmp(buf, da_delete_method_names[i]) == 0)
|
|
break;
|
|
}
|
|
if (i > DA_DELETE_MAX)
|
|
return (EINVAL);
|
|
softc->delete_method_pref = i;
|
|
dadeletemethodchoose(softc, DA_DELETE_NONE);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
dazonemodesysctl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
char tmpbuf[40];
|
|
struct da_softc *softc;
|
|
int error;
|
|
|
|
softc = (struct da_softc *)arg1;
|
|
|
|
switch (softc->zone_mode) {
|
|
case DA_ZONE_DRIVE_MANAGED:
|
|
snprintf(tmpbuf, sizeof(tmpbuf), "Drive Managed");
|
|
break;
|
|
case DA_ZONE_HOST_AWARE:
|
|
snprintf(tmpbuf, sizeof(tmpbuf), "Host Aware");
|
|
break;
|
|
case DA_ZONE_HOST_MANAGED:
|
|
snprintf(tmpbuf, sizeof(tmpbuf), "Host Managed");
|
|
break;
|
|
case DA_ZONE_NONE:
|
|
default:
|
|
snprintf(tmpbuf, sizeof(tmpbuf), "Not Zoned");
|
|
break;
|
|
}
|
|
|
|
error = sysctl_handle_string(oidp, tmpbuf, sizeof(tmpbuf), req);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
dazonesupsysctl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
char tmpbuf[180];
|
|
struct da_softc *softc;
|
|
struct sbuf sb;
|
|
int error, first;
|
|
unsigned int i;
|
|
|
|
softc = (struct da_softc *)arg1;
|
|
|
|
error = 0;
|
|
first = 1;
|
|
sbuf_new(&sb, tmpbuf, sizeof(tmpbuf), 0);
|
|
|
|
for (i = 0; i < sizeof(da_zone_desc_table) /
|
|
sizeof(da_zone_desc_table[0]); i++) {
|
|
if (softc->zone_flags & da_zone_desc_table[i].value) {
|
|
if (first == 0)
|
|
sbuf_printf(&sb, ", ");
|
|
else
|
|
first = 0;
|
|
sbuf_cat(&sb, da_zone_desc_table[i].desc);
|
|
}
|
|
}
|
|
|
|
if (first == 1)
|
|
sbuf_printf(&sb, "None");
|
|
|
|
sbuf_finish(&sb);
|
|
|
|
error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static cam_status
|
|
daregister(struct cam_periph *periph, void *arg)
|
|
{
|
|
struct da_softc *softc;
|
|
struct ccb_pathinq cpi;
|
|
struct ccb_getdev *cgd;
|
|
char tmpstr[80];
|
|
caddr_t match;
|
|
int quirks;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
if (cgd == NULL) {
|
|
printf("daregister: no getdev CCB, can't register device\n");
|
|
return(CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
softc = (struct da_softc *)malloc(sizeof(*softc), M_DEVBUF,
|
|
M_NOWAIT|M_ZERO);
|
|
|
|
if (softc == NULL) {
|
|
printf("daregister: Unable to probe new device. "
|
|
"Unable to allocate softc\n");
|
|
return(CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
if (cam_iosched_init(&softc->cam_iosched, periph) != 0) {
|
|
printf("daregister: Unable to probe new device. "
|
|
"Unable to allocate iosched memory\n");
|
|
free(softc, M_DEVBUF);
|
|
return(CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
LIST_INIT(&softc->pending_ccbs);
|
|
softc->state = DA_STATE_PROBE_WP;
|
|
bioq_init(&softc->delete_run_queue);
|
|
if (SID_IS_REMOVABLE(&cgd->inq_data))
|
|
softc->flags |= DA_FLAG_PACK_REMOVABLE;
|
|
softc->unmap_max_ranges = UNMAP_MAX_RANGES;
|
|
softc->unmap_max_lba = UNMAP_RANGE_MAX;
|
|
softc->unmap_gran = 0;
|
|
softc->unmap_gran_align = 0;
|
|
softc->ws_max_blks = WS16_MAX_BLKS;
|
|
softc->trim_max_ranges = ATA_TRIM_MAX_RANGES;
|
|
softc->rotating = 1;
|
|
|
|
periph->softc = softc;
|
|
|
|
/*
|
|
* See if this device has any quirks.
|
|
*/
|
|
match = cam_quirkmatch((caddr_t)&cgd->inq_data,
|
|
(caddr_t)da_quirk_table,
|
|
nitems(da_quirk_table),
|
|
sizeof(*da_quirk_table), scsi_inquiry_match);
|
|
|
|
if (match != NULL)
|
|
softc->quirks = ((struct da_quirk_entry *)match)->quirks;
|
|
else
|
|
softc->quirks = DA_Q_NONE;
|
|
|
|
/* Check if the SIM does not want 6 byte commands */
|
|
xpt_path_inq(&cpi, periph->path);
|
|
if (cpi.ccb_h.status == CAM_REQ_CMP && (cpi.hba_misc & PIM_NO_6_BYTE))
|
|
softc->quirks |= DA_Q_NO_6_BYTE;
|
|
|
|
/* Override quirks if tunable is set */
|
|
snprintf(tmpstr, sizeof(tmpstr), "kern.cam.da.%d.quirks",
|
|
periph->unit_number);
|
|
quirks = softc->quirks;
|
|
TUNABLE_INT_FETCH(tmpstr, &quirks);
|
|
softc->quirks = quirks;
|
|
|
|
if (SID_TYPE(&cgd->inq_data) == T_ZBC_HM)
|
|
softc->zone_mode = DA_ZONE_HOST_MANAGED;
|
|
else if (softc->quirks & DA_Q_SMR_DM)
|
|
softc->zone_mode = DA_ZONE_DRIVE_MANAGED;
|
|
else
|
|
softc->zone_mode = DA_ZONE_NONE;
|
|
|
|
if (softc->zone_mode != DA_ZONE_NONE) {
|
|
if (scsi_vpd_supported_page(periph, SVPD_ATA_INFORMATION)) {
|
|
if (scsi_vpd_supported_page(periph, SVPD_ZONED_BDC))
|
|
softc->zone_interface = DA_ZONE_IF_ATA_SAT;
|
|
else
|
|
softc->zone_interface = DA_ZONE_IF_ATA_PASS;
|
|
} else
|
|
softc->zone_interface = DA_ZONE_IF_SCSI;
|
|
}
|
|
|
|
TASK_INIT(&softc->sysctl_task, 0, dasysctlinit, periph);
|
|
|
|
/*
|
|
* Take an exclusive section lock qon the periph while dastart is called
|
|
* to finish the probe. The lock will be dropped in dadone at the end
|
|
* of probe. This locks out daopen and daclose from racing with the
|
|
* probe.
|
|
*
|
|
* XXX if cam_periph_hold returns an error, we don't hold a refcount.
|
|
*/
|
|
(void)da_periph_hold(periph, PRIBIO, DA_REF_PROBE_HOLD);
|
|
|
|
/*
|
|
* Schedule a periodic event to occasionally send an
|
|
* ordered tag to a device.
|
|
*/
|
|
callout_init_mtx(&softc->sendordered_c, cam_periph_mtx(periph), 0);
|
|
callout_reset(&softc->sendordered_c,
|
|
(da_default_timeout * hz) / DA_ORDEREDTAG_INTERVAL,
|
|
dasendorderedtag, periph);
|
|
|
|
cam_periph_unlock(periph);
|
|
/*
|
|
* RBC devices don't have to support READ(6), only READ(10).
|
|
*/
|
|
if (softc->quirks & DA_Q_NO_6_BYTE || SID_TYPE(&cgd->inq_data) == T_RBC)
|
|
softc->minimum_cmd_size = 10;
|
|
else
|
|
softc->minimum_cmd_size = 6;
|
|
|
|
/*
|
|
* Load the user's default, if any.
|
|
*/
|
|
snprintf(tmpstr, sizeof(tmpstr), "kern.cam.da.%d.minimum_cmd_size",
|
|
periph->unit_number);
|
|
TUNABLE_INT_FETCH(tmpstr, &softc->minimum_cmd_size);
|
|
|
|
/*
|
|
* 6, 10, 12 and 16 are the currently permissible values.
|
|
*/
|
|
if (softc->minimum_cmd_size > 12)
|
|
softc->minimum_cmd_size = 16;
|
|
else if (softc->minimum_cmd_size > 10)
|
|
softc->minimum_cmd_size = 12;
|
|
else if (softc->minimum_cmd_size > 6)
|
|
softc->minimum_cmd_size = 10;
|
|
else
|
|
softc->minimum_cmd_size = 6;
|
|
|
|
/* Predict whether device may support READ CAPACITY(16). */
|
|
if (SID_ANSI_REV(&cgd->inq_data) >= SCSI_REV_SPC3 &&
|
|
(softc->quirks & DA_Q_NO_RC16) == 0) {
|
|
softc->flags |= DA_FLAG_CAN_RC16;
|
|
}
|
|
|
|
/*
|
|
* Register this media as a disk.
|
|
*/
|
|
softc->disk = disk_alloc();
|
|
softc->disk->d_devstat = devstat_new_entry(periph->periph_name,
|
|
periph->unit_number, 0,
|
|
DEVSTAT_BS_UNAVAILABLE,
|
|
SID_TYPE(&cgd->inq_data) |
|
|
XPORT_DEVSTAT_TYPE(cpi.transport),
|
|
DEVSTAT_PRIORITY_DISK);
|
|
softc->disk->d_open = daopen;
|
|
softc->disk->d_close = daclose;
|
|
softc->disk->d_strategy = dastrategy;
|
|
softc->disk->d_dump = dadump;
|
|
softc->disk->d_getattr = dagetattr;
|
|
softc->disk->d_gone = dadiskgonecb;
|
|
softc->disk->d_name = "da";
|
|
softc->disk->d_drv1 = periph;
|
|
if (cpi.maxio == 0)
|
|
softc->maxio = DFLTPHYS; /* traditional default */
|
|
else if (cpi.maxio > MAXPHYS)
|
|
softc->maxio = MAXPHYS; /* for safety */
|
|
else
|
|
softc->maxio = cpi.maxio;
|
|
if (softc->quirks & DA_Q_128KB)
|
|
softc->maxio = min(softc->maxio, 128 * 1024);
|
|
softc->disk->d_maxsize = softc->maxio;
|
|
softc->disk->d_unit = periph->unit_number;
|
|
softc->disk->d_flags = DISKFLAG_DIRECT_COMPLETION | DISKFLAG_CANZONE;
|
|
if ((softc->quirks & DA_Q_NO_SYNC_CACHE) == 0)
|
|
softc->disk->d_flags |= DISKFLAG_CANFLUSHCACHE;
|
|
if ((cpi.hba_misc & PIM_UNMAPPED) != 0) {
|
|
softc->unmappedio = 1;
|
|
softc->disk->d_flags |= DISKFLAG_UNMAPPED_BIO;
|
|
}
|
|
cam_strvis(softc->disk->d_descr, cgd->inq_data.vendor,
|
|
sizeof(cgd->inq_data.vendor), sizeof(softc->disk->d_descr));
|
|
strlcat(softc->disk->d_descr, " ", sizeof(softc->disk->d_descr));
|
|
cam_strvis(&softc->disk->d_descr[strlen(softc->disk->d_descr)],
|
|
cgd->inq_data.product, sizeof(cgd->inq_data.product),
|
|
sizeof(softc->disk->d_descr) - strlen(softc->disk->d_descr));
|
|
softc->disk->d_hba_vendor = cpi.hba_vendor;
|
|
softc->disk->d_hba_device = cpi.hba_device;
|
|
softc->disk->d_hba_subvendor = cpi.hba_subvendor;
|
|
softc->disk->d_hba_subdevice = cpi.hba_subdevice;
|
|
snprintf(softc->disk->d_attachment, sizeof(softc->disk->d_attachment),
|
|
"%s%d", cpi.dev_name, cpi.unit_number);
|
|
|
|
/*
|
|
* Acquire a reference to the periph before we register with GEOM.
|
|
* We'll release this reference once GEOM calls us back (via
|
|
* dadiskgonecb()) telling us that our provider has been freed.
|
|
*/
|
|
if (da_periph_acquire(periph, DA_REF_GEOM) != 0) {
|
|
xpt_print(periph->path, "%s: lost periph during "
|
|
"registration!\n", __func__);
|
|
cam_periph_lock(periph);
|
|
return (CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
disk_create(softc->disk, DISK_VERSION);
|
|
cam_periph_lock(periph);
|
|
|
|
/*
|
|
* Add async callbacks for events of interest.
|
|
* I don't bother checking if this fails as,
|
|
* in most cases, the system will function just
|
|
* fine without them and the only alternative
|
|
* would be to not attach the device on failure.
|
|
*/
|
|
xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE |
|
|
AC_ADVINFO_CHANGED | AC_SCSI_AEN | AC_UNIT_ATTENTION |
|
|
AC_INQ_CHANGED, daasync, periph, periph->path);
|
|
|
|
/*
|
|
* Emit an attribute changed notification just in case
|
|
* physical path information arrived before our async
|
|
* event handler was registered, but after anyone attaching
|
|
* to our disk device polled it.
|
|
*/
|
|
disk_attr_changed(softc->disk, "GEOM::physpath", M_NOWAIT);
|
|
|
|
/*
|
|
* Schedule a periodic media polling events.
|
|
*/
|
|
callout_init_mtx(&softc->mediapoll_c, cam_periph_mtx(periph), 0);
|
|
if ((softc->flags & DA_FLAG_PACK_REMOVABLE) &&
|
|
(cgd->inq_flags & SID_AEN) == 0 &&
|
|
da_poll_period != 0)
|
|
callout_reset(&softc->mediapoll_c, da_poll_period * hz,
|
|
damediapoll, periph);
|
|
|
|
xpt_schedule(periph, CAM_PRIORITY_DEV);
|
|
|
|
return(CAM_REQ_CMP);
|
|
}
|
|
|
|
static int
|
|
da_zone_bio_to_scsi(int disk_zone_cmd)
|
|
{
|
|
switch (disk_zone_cmd) {
|
|
case DISK_ZONE_OPEN:
|
|
return ZBC_OUT_SA_OPEN;
|
|
case DISK_ZONE_CLOSE:
|
|
return ZBC_OUT_SA_CLOSE;
|
|
case DISK_ZONE_FINISH:
|
|
return ZBC_OUT_SA_FINISH;
|
|
case DISK_ZONE_RWP:
|
|
return ZBC_OUT_SA_RWP;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int
|
|
da_zone_cmd(struct cam_periph *periph, union ccb *ccb, struct bio *bp,
|
|
int *queue_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
int error;
|
|
|
|
error = 0;
|
|
|
|
if (bp->bio_cmd != BIO_ZONE) {
|
|
error = EINVAL;
|
|
goto bailout;
|
|
}
|
|
|
|
softc = periph->softc;
|
|
|
|
switch (bp->bio_zone.zone_cmd) {
|
|
case DISK_ZONE_OPEN:
|
|
case DISK_ZONE_CLOSE:
|
|
case DISK_ZONE_FINISH:
|
|
case DISK_ZONE_RWP: {
|
|
int zone_flags;
|
|
int zone_sa;
|
|
uint64_t lba;
|
|
|
|
zone_sa = da_zone_bio_to_scsi(bp->bio_zone.zone_cmd);
|
|
if (zone_sa == -1) {
|
|
xpt_print(periph->path, "Cannot translate zone "
|
|
"cmd %#x to SCSI\n", bp->bio_zone.zone_cmd);
|
|
error = EINVAL;
|
|
goto bailout;
|
|
}
|
|
|
|
zone_flags = 0;
|
|
lba = bp->bio_zone.zone_params.rwp.id;
|
|
|
|
if (bp->bio_zone.zone_params.rwp.flags &
|
|
DISK_ZONE_RWP_FLAG_ALL)
|
|
zone_flags |= ZBC_OUT_ALL;
|
|
|
|
if (softc->zone_interface != DA_ZONE_IF_ATA_PASS) {
|
|
scsi_zbc_out(&ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*service_action*/ zone_sa,
|
|
/*zone_id*/ lba,
|
|
/*zone_flags*/ zone_flags,
|
|
/*data_ptr*/ NULL,
|
|
/*dxfer_len*/ 0,
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
} else {
|
|
/*
|
|
* Note that in this case, even though we can
|
|
* technically use NCQ, we don't bother for several
|
|
* reasons:
|
|
* 1. It hasn't been tested on a SAT layer that
|
|
* supports it. This is new as of SAT-4.
|
|
* 2. Even when there is a SAT layer that supports
|
|
* it, that SAT layer will also probably support
|
|
* ZBC -> ZAC translation, since they are both
|
|
* in the SAT-4 spec.
|
|
* 3. Translation will likely be preferable to ATA
|
|
* passthrough. LSI / Avago at least single
|
|
* steps ATA passthrough commands in the HBA,
|
|
* regardless of protocol, so unless that
|
|
* changes, there is a performance penalty for
|
|
* doing ATA passthrough no matter whether
|
|
* you're using NCQ/FPDMA, DMA or PIO.
|
|
* 4. It requires a 32-byte CDB, which at least at
|
|
* this point in CAM requires a CDB pointer, which
|
|
* would require us to allocate an additional bit
|
|
* of storage separate from the CCB.
|
|
*/
|
|
error = scsi_ata_zac_mgmt_out(&ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*use_ncq*/ 0,
|
|
/*zm_action*/ zone_sa,
|
|
/*zone_id*/ lba,
|
|
/*zone_flags*/ zone_flags,
|
|
/*data_ptr*/ NULL,
|
|
/*dxfer_len*/ 0,
|
|
/*cdb_storage*/ NULL,
|
|
/*cdb_storage_len*/ 0,
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
if (error != 0) {
|
|
error = EINVAL;
|
|
xpt_print(periph->path,
|
|
"scsi_ata_zac_mgmt_out() returned an "
|
|
"error!");
|
|
goto bailout;
|
|
}
|
|
}
|
|
*queue_ccb = 1;
|
|
|
|
break;
|
|
}
|
|
case DISK_ZONE_REPORT_ZONES: {
|
|
uint8_t *rz_ptr;
|
|
uint32_t num_entries, alloc_size;
|
|
struct disk_zone_report *rep;
|
|
|
|
rep = &bp->bio_zone.zone_params.report;
|
|
|
|
num_entries = rep->entries_allocated;
|
|
if (num_entries == 0) {
|
|
xpt_print(periph->path, "No entries allocated for "
|
|
"Report Zones request\n");
|
|
error = EINVAL;
|
|
goto bailout;
|
|
}
|
|
alloc_size = sizeof(struct scsi_report_zones_hdr) +
|
|
(sizeof(struct scsi_report_zones_desc) * num_entries);
|
|
alloc_size = min(alloc_size, softc->disk->d_maxsize);
|
|
rz_ptr = malloc(alloc_size, M_SCSIDA, M_NOWAIT | M_ZERO);
|
|
if (rz_ptr == NULL) {
|
|
xpt_print(periph->path, "Unable to allocate memory "
|
|
"for Report Zones request\n");
|
|
error = ENOMEM;
|
|
goto bailout;
|
|
}
|
|
|
|
if (softc->zone_interface != DA_ZONE_IF_ATA_PASS) {
|
|
scsi_zbc_in(&ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbcfnp*/ dadone,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*service_action*/ ZBC_IN_SA_REPORT_ZONES,
|
|
/*zone_start_lba*/ rep->starting_id,
|
|
/*zone_options*/ rep->rep_options,
|
|
/*data_ptr*/ rz_ptr,
|
|
/*dxfer_len*/ alloc_size,
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
} else {
|
|
/*
|
|
* Note that in this case, even though we can
|
|
* technically use NCQ, we don't bother for several
|
|
* reasons:
|
|
* 1. It hasn't been tested on a SAT layer that
|
|
* supports it. This is new as of SAT-4.
|
|
* 2. Even when there is a SAT layer that supports
|
|
* it, that SAT layer will also probably support
|
|
* ZBC -> ZAC translation, since they are both
|
|
* in the SAT-4 spec.
|
|
* 3. Translation will likely be preferable to ATA
|
|
* passthrough. LSI / Avago at least single
|
|
* steps ATA passthrough commands in the HBA,
|
|
* regardless of protocol, so unless that
|
|
* changes, there is a performance penalty for
|
|
* doing ATA passthrough no matter whether
|
|
* you're using NCQ/FPDMA, DMA or PIO.
|
|
* 4. It requires a 32-byte CDB, which at least at
|
|
* this point in CAM requires a CDB pointer, which
|
|
* would require us to allocate an additional bit
|
|
* of storage separate from the CCB.
|
|
*/
|
|
error = scsi_ata_zac_mgmt_in(&ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbcfnp*/ dadone,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*use_ncq*/ 0,
|
|
/*zm_action*/ ATA_ZM_REPORT_ZONES,
|
|
/*zone_id*/ rep->starting_id,
|
|
/*zone_flags*/ rep->rep_options,
|
|
/*data_ptr*/ rz_ptr,
|
|
/*dxfer_len*/ alloc_size,
|
|
/*cdb_storage*/ NULL,
|
|
/*cdb_storage_len*/ 0,
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
if (error != 0) {
|
|
error = EINVAL;
|
|
xpt_print(periph->path,
|
|
"scsi_ata_zac_mgmt_in() returned an "
|
|
"error!");
|
|
goto bailout;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For BIO_ZONE, this isn't normally needed. However, it
|
|
* is used by devstat_end_transaction_bio() to determine
|
|
* how much data was transferred.
|
|
*/
|
|
/*
|
|
* XXX KDM we have a problem. But I'm not sure how to fix
|
|
* it. devstat uses bio_bcount - bio_resid to calculate
|
|
* the amount of data transferred. The GEOM disk code
|
|
* uses bio_length - bio_resid to calculate the amount of
|
|
* data in bio_completed. We have different structure
|
|
* sizes above and below the ada(4) driver. So, if we
|
|
* use the sizes above, the amount transferred won't be
|
|
* quite accurate for devstat. If we use different sizes
|
|
* for bio_bcount and bio_length (above and below
|
|
* respectively), then the residual needs to match one or
|
|
* the other. Everything is calculated after the bio
|
|
* leaves the driver, so changing the values around isn't
|
|
* really an option. For now, just set the count to the
|
|
* passed in length. This means that the calculations
|
|
* above (e.g. bio_completed) will be correct, but the
|
|
* amount of data reported to devstat will be slightly
|
|
* under or overstated.
|
|
*/
|
|
bp->bio_bcount = bp->bio_length;
|
|
|
|
*queue_ccb = 1;
|
|
|
|
break;
|
|
}
|
|
case DISK_ZONE_GET_PARAMS: {
|
|
struct disk_zone_disk_params *params;
|
|
|
|
params = &bp->bio_zone.zone_params.disk_params;
|
|
bzero(params, sizeof(*params));
|
|
|
|
switch (softc->zone_mode) {
|
|
case DA_ZONE_DRIVE_MANAGED:
|
|
params->zone_mode = DISK_ZONE_MODE_DRIVE_MANAGED;
|
|
break;
|
|
case DA_ZONE_HOST_AWARE:
|
|
params->zone_mode = DISK_ZONE_MODE_HOST_AWARE;
|
|
break;
|
|
case DA_ZONE_HOST_MANAGED:
|
|
params->zone_mode = DISK_ZONE_MODE_HOST_MANAGED;
|
|
break;
|
|
default:
|
|
case DA_ZONE_NONE:
|
|
params->zone_mode = DISK_ZONE_MODE_NONE;
|
|
break;
|
|
}
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_URSWRZ)
|
|
params->flags |= DISK_ZONE_DISK_URSWRZ;
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_OPT_SEQ_SET) {
|
|
params->optimal_seq_zones = softc->optimal_seq_zones;
|
|
params->flags |= DISK_ZONE_OPT_SEQ_SET;
|
|
}
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_OPT_NONSEQ_SET) {
|
|
params->optimal_nonseq_zones =
|
|
softc->optimal_nonseq_zones;
|
|
params->flags |= DISK_ZONE_OPT_NONSEQ_SET;
|
|
}
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_MAX_SEQ_SET) {
|
|
params->max_seq_zones = softc->max_seq_zones;
|
|
params->flags |= DISK_ZONE_MAX_SEQ_SET;
|
|
}
|
|
if (softc->zone_flags & DA_ZONE_FLAG_RZ_SUP)
|
|
params->flags |= DISK_ZONE_RZ_SUP;
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_OPEN_SUP)
|
|
params->flags |= DISK_ZONE_OPEN_SUP;
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_CLOSE_SUP)
|
|
params->flags |= DISK_ZONE_CLOSE_SUP;
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_FINISH_SUP)
|
|
params->flags |= DISK_ZONE_FINISH_SUP;
|
|
|
|
if (softc->zone_flags & DA_ZONE_FLAG_RWP_SUP)
|
|
params->flags |= DISK_ZONE_RWP_SUP;
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
bailout:
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
dastart(struct cam_periph *periph, union ccb *start_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dastart\n"));
|
|
|
|
skipstate:
|
|
switch (softc->state) {
|
|
case DA_STATE_NORMAL:
|
|
{
|
|
struct bio *bp;
|
|
uint8_t tag_code;
|
|
|
|
more:
|
|
bp = cam_iosched_next_bio(softc->cam_iosched);
|
|
if (bp == NULL) {
|
|
if (cam_iosched_has_work_flags(softc->cam_iosched,
|
|
DA_WORK_TUR)) {
|
|
softc->flags |= DA_FLAG_TUR_PENDING;
|
|
cam_iosched_clr_work_flags(softc->cam_iosched,
|
|
DA_WORK_TUR);
|
|
scsi_test_unit_ready(&start_ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
dadone_tur,
|
|
MSG_SIMPLE_Q_TAG,
|
|
SSD_FULL_SIZE,
|
|
da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_TUR;
|
|
xpt_action(start_ccb);
|
|
} else
|
|
xpt_release_ccb(start_ccb);
|
|
break;
|
|
}
|
|
|
|
if (bp->bio_cmd == BIO_DELETE) {
|
|
if (softc->delete_func != NULL) {
|
|
softc->delete_func(periph, start_ccb, bp);
|
|
goto out;
|
|
} else {
|
|
/*
|
|
* Not sure this is possible, but failsafe by
|
|
* lying and saying "sure, done."
|
|
*/
|
|
biofinish(bp, NULL, 0);
|
|
goto more;
|
|
}
|
|
}
|
|
|
|
if (cam_iosched_has_work_flags(softc->cam_iosched,
|
|
DA_WORK_TUR)) {
|
|
cam_iosched_clr_work_flags(softc->cam_iosched,
|
|
DA_WORK_TUR);
|
|
da_periph_release_locked(periph, DA_REF_TUR);
|
|
}
|
|
|
|
if ((bp->bio_flags & BIO_ORDERED) != 0 ||
|
|
(softc->flags & DA_FLAG_NEED_OTAG) != 0) {
|
|
softc->flags &= ~DA_FLAG_NEED_OTAG;
|
|
softc->flags |= DA_FLAG_WAS_OTAG;
|
|
tag_code = MSG_ORDERED_Q_TAG;
|
|
} else {
|
|
tag_code = MSG_SIMPLE_Q_TAG;
|
|
}
|
|
|
|
switch (bp->bio_cmd) {
|
|
case BIO_WRITE:
|
|
case BIO_READ:
|
|
{
|
|
void *data_ptr;
|
|
int rw_op;
|
|
|
|
biotrack(bp, __func__);
|
|
|
|
if (bp->bio_cmd == BIO_WRITE) {
|
|
softc->flags |= DA_FLAG_DIRTY;
|
|
rw_op = SCSI_RW_WRITE;
|
|
} else {
|
|
rw_op = SCSI_RW_READ;
|
|
}
|
|
|
|
data_ptr = bp->bio_data;
|
|
if ((bp->bio_flags & (BIO_UNMAPPED|BIO_VLIST)) != 0) {
|
|
rw_op |= SCSI_RW_BIO;
|
|
data_ptr = bp;
|
|
}
|
|
|
|
scsi_read_write(&start_ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone,
|
|
/*tag_action*/tag_code,
|
|
rw_op,
|
|
/*byte2*/0,
|
|
softc->minimum_cmd_size,
|
|
/*lba*/bp->bio_pblkno,
|
|
/*block_count*/bp->bio_bcount /
|
|
softc->params.secsize,
|
|
data_ptr,
|
|
/*dxfer_len*/ bp->bio_bcount,
|
|
/*sense_len*/SSD_FULL_SIZE,
|
|
da_default_timeout * 1000);
|
|
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
|
|
start_ccb->csio.bio = bp;
|
|
#endif
|
|
break;
|
|
}
|
|
case BIO_FLUSH:
|
|
/*
|
|
* If we don't support sync cache, or the disk
|
|
* isn't dirty, FLUSH is a no-op. Use the
|
|
* allocated CCB for the next bio if one is
|
|
* available.
|
|
*/
|
|
if ((softc->quirks & DA_Q_NO_SYNC_CACHE) != 0 ||
|
|
(softc->flags & DA_FLAG_DIRTY) == 0) {
|
|
biodone(bp);
|
|
goto skipstate;
|
|
}
|
|
|
|
/*
|
|
* BIO_FLUSH doesn't currently communicate
|
|
* range data, so we synchronize the cache
|
|
* over the whole disk.
|
|
*/
|
|
scsi_synchronize_cache(&start_ccb->csio,
|
|
/*retries*/1,
|
|
/*cbfcnp*/dadone,
|
|
/*tag_action*/tag_code,
|
|
/*begin_lba*/0,
|
|
/*lb_count*/0,
|
|
SSD_FULL_SIZE,
|
|
da_default_timeout*1000);
|
|
/*
|
|
* Clear the dirty flag before sending the command.
|
|
* Either this sync cache will be successful, or it
|
|
* will fail after a retry. If it fails, it is
|
|
* unlikely to be successful if retried later, so
|
|
* we'll save ourselves time by just marking the
|
|
* device clean.
|
|
*/
|
|
softc->flags &= ~DA_FLAG_DIRTY;
|
|
break;
|
|
case BIO_ZONE: {
|
|
int error, queue_ccb;
|
|
|
|
queue_ccb = 0;
|
|
|
|
error = da_zone_cmd(periph, start_ccb, bp,&queue_ccb);
|
|
if ((error != 0)
|
|
|| (queue_ccb == 0)) {
|
|
biofinish(bp, NULL, error);
|
|
xpt_release_ccb(start_ccb);
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
biofinish(bp, NULL, EOPNOTSUPP);
|
|
xpt_release_ccb(start_ccb);
|
|
return;
|
|
}
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_BUFFER_IO;
|
|
start_ccb->ccb_h.flags |= CAM_UNLOCKED;
|
|
start_ccb->ccb_h.softtimeout = sbttotv(da_default_softtimeout);
|
|
|
|
out:
|
|
LIST_INSERT_HEAD(&softc->pending_ccbs,
|
|
&start_ccb->ccb_h, periph_links.le);
|
|
|
|
/* We expect a unit attention from this device */
|
|
if ((softc->flags & DA_FLAG_RETRY_UA) != 0) {
|
|
start_ccb->ccb_h.ccb_state |= DA_CCB_RETRY_UA;
|
|
softc->flags &= ~DA_FLAG_RETRY_UA;
|
|
}
|
|
|
|
start_ccb->ccb_h.ccb_bp = bp;
|
|
softc->refcount++;
|
|
cam_periph_unlock(periph);
|
|
xpt_action(start_ccb);
|
|
cam_periph_lock(periph);
|
|
|
|
/* May have more work to do, so ensure we stay scheduled */
|
|
daschedule(periph);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_WP:
|
|
{
|
|
void *mode_buf;
|
|
int mode_buf_len;
|
|
|
|
if (da_disable_wp_detection) {
|
|
if ((softc->flags & DA_FLAG_CAN_RC16) != 0)
|
|
softc->state = DA_STATE_PROBE_RC16;
|
|
else
|
|
softc->state = DA_STATE_PROBE_RC;
|
|
goto skipstate;
|
|
}
|
|
mode_buf_len = 192;
|
|
mode_buf = malloc(mode_buf_len, M_SCSIDA, M_NOWAIT);
|
|
if (mode_buf == NULL) {
|
|
xpt_print(periph->path, "Unable to send mode sense - "
|
|
"malloc failure\n");
|
|
if ((softc->flags & DA_FLAG_CAN_RC16) != 0)
|
|
softc->state = DA_STATE_PROBE_RC16;
|
|
else
|
|
softc->state = DA_STATE_PROBE_RC;
|
|
goto skipstate;
|
|
}
|
|
scsi_mode_sense_len(&start_ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone_probewp,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*dbd*/ FALSE,
|
|
/*pc*/ SMS_PAGE_CTRL_CURRENT,
|
|
/*page*/ SMS_ALL_PAGES_PAGE,
|
|
/*param_buf*/ mode_buf,
|
|
/*param_len*/ mode_buf_len,
|
|
/*minimum_cmd_size*/ softc->minimum_cmd_size,
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_WP;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_RC:
|
|
{
|
|
struct scsi_read_capacity_data *rcap;
|
|
|
|
rcap = (struct scsi_read_capacity_data *)
|
|
malloc(sizeof(*rcap), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
if (rcap == NULL) {
|
|
printf("dastart: Couldn't malloc read_capacity data\n");
|
|
/* da_free_periph??? */
|
|
break;
|
|
}
|
|
scsi_read_capacity(&start_ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
dadone_proberc,
|
|
MSG_SIMPLE_Q_TAG,
|
|
rcap,
|
|
SSD_FULL_SIZE,
|
|
/*timeout*/5000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_RC;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_RC16:
|
|
{
|
|
struct scsi_read_capacity_data_long *rcaplong;
|
|
|
|
rcaplong = (struct scsi_read_capacity_data_long *)
|
|
malloc(sizeof(*rcaplong), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
if (rcaplong == NULL) {
|
|
printf("dastart: Couldn't malloc read_capacity data\n");
|
|
/* da_free_periph??? */
|
|
break;
|
|
}
|
|
scsi_read_capacity_16(&start_ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone_proberc,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*lba*/ 0,
|
|
/*reladr*/ 0,
|
|
/*pmi*/ 0,
|
|
/*rcap_buf*/ (uint8_t *)rcaplong,
|
|
/*rcap_buf_len*/ sizeof(*rcaplong),
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_RC16;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_LBP:
|
|
{
|
|
struct scsi_vpd_logical_block_prov *lbp;
|
|
|
|
if (!scsi_vpd_supported_page(periph, SVPD_LBP)) {
|
|
/*
|
|
* If we get here we don't support any SBC-3 delete
|
|
* methods with UNMAP as the Logical Block Provisioning
|
|
* VPD page support is required for devices which
|
|
* support it according to T10/1799-D Revision 31
|
|
* however older revisions of the spec don't mandate
|
|
* this so we currently don't remove these methods
|
|
* from the available set.
|
|
*/
|
|
softc->state = DA_STATE_PROBE_BLK_LIMITS;
|
|
goto skipstate;
|
|
}
|
|
|
|
lbp = (struct scsi_vpd_logical_block_prov *)
|
|
malloc(sizeof(*lbp), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
|
|
if (lbp == NULL) {
|
|
printf("dastart: Couldn't malloc lbp data\n");
|
|
/* da_free_periph??? */
|
|
break;
|
|
}
|
|
|
|
scsi_inquiry(&start_ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone_probelbp,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
/*inq_buf*/(u_int8_t *)lbp,
|
|
/*inq_len*/sizeof(*lbp),
|
|
/*evpd*/TRUE,
|
|
/*page_code*/SVPD_LBP,
|
|
/*sense_len*/SSD_MIN_SIZE,
|
|
/*timeout*/da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_LBP;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_BLK_LIMITS:
|
|
{
|
|
struct scsi_vpd_block_limits *block_limits;
|
|
|
|
if (!scsi_vpd_supported_page(periph, SVPD_BLOCK_LIMITS)) {
|
|
/* Not supported skip to next probe */
|
|
softc->state = DA_STATE_PROBE_BDC;
|
|
goto skipstate;
|
|
}
|
|
|
|
block_limits = (struct scsi_vpd_block_limits *)
|
|
malloc(sizeof(*block_limits), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
|
|
if (block_limits == NULL) {
|
|
printf("dastart: Couldn't malloc block_limits data\n");
|
|
/* da_free_periph??? */
|
|
break;
|
|
}
|
|
|
|
scsi_inquiry(&start_ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone_probeblklimits,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
/*inq_buf*/(u_int8_t *)block_limits,
|
|
/*inq_len*/sizeof(*block_limits),
|
|
/*evpd*/TRUE,
|
|
/*page_code*/SVPD_BLOCK_LIMITS,
|
|
/*sense_len*/SSD_MIN_SIZE,
|
|
/*timeout*/da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_BLK_LIMITS;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_BDC:
|
|
{
|
|
struct scsi_vpd_block_characteristics *bdc;
|
|
|
|
if (!scsi_vpd_supported_page(periph, SVPD_BDC)) {
|
|
softc->state = DA_STATE_PROBE_ATA;
|
|
goto skipstate;
|
|
}
|
|
|
|
bdc = (struct scsi_vpd_block_characteristics *)
|
|
malloc(sizeof(*bdc), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
|
|
if (bdc == NULL) {
|
|
printf("dastart: Couldn't malloc bdc data\n");
|
|
/* da_free_periph??? */
|
|
break;
|
|
}
|
|
|
|
scsi_inquiry(&start_ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone_probebdc,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
/*inq_buf*/(u_int8_t *)bdc,
|
|
/*inq_len*/sizeof(*bdc),
|
|
/*evpd*/TRUE,
|
|
/*page_code*/SVPD_BDC,
|
|
/*sense_len*/SSD_MIN_SIZE,
|
|
/*timeout*/da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_BDC;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_ATA:
|
|
{
|
|
struct ata_params *ata_params;
|
|
|
|
if (!scsi_vpd_supported_page(periph, SVPD_ATA_INFORMATION)) {
|
|
if ((softc->zone_mode == DA_ZONE_HOST_AWARE)
|
|
|| (softc->zone_mode == DA_ZONE_HOST_MANAGED)) {
|
|
/*
|
|
* Note that if the ATA VPD page isn't
|
|
* supported, we aren't talking to an ATA
|
|
* device anyway. Support for that VPD
|
|
* page is mandatory for SCSI to ATA (SAT)
|
|
* translation layers.
|
|
*/
|
|
softc->state = DA_STATE_PROBE_ZONE;
|
|
goto skipstate;
|
|
}
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
ata_params = &periph->path->device->ident_data;
|
|
|
|
scsi_ata_identify(&start_ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone_probeata,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
/*data_ptr*/(u_int8_t *)ata_params,
|
|
/*dxfer_len*/sizeof(*ata_params),
|
|
/*sense_len*/SSD_FULL_SIZE,
|
|
/*timeout*/da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_ATA_LOGDIR:
|
|
{
|
|
struct ata_gp_log_dir *log_dir;
|
|
int retval;
|
|
|
|
retval = 0;
|
|
|
|
if ((softc->flags & DA_FLAG_CAN_ATA_LOG) == 0) {
|
|
/*
|
|
* If we don't have log support, not much point in
|
|
* trying to probe zone support.
|
|
*/
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If we have an ATA device (the SCSI ATA Information VPD
|
|
* page should be present and the ATA identify should have
|
|
* succeeded) and it supports logs, ask for the log directory.
|
|
*/
|
|
|
|
log_dir = malloc(sizeof(*log_dir), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
if (log_dir == NULL) {
|
|
xpt_print(periph->path, "Couldn't malloc log_dir "
|
|
"data\n");
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
retval = scsi_ata_read_log(&start_ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone_probeatalogdir,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*log_address*/ ATA_LOG_DIRECTORY,
|
|
/*page_number*/ 0,
|
|
/*block_count*/ 1,
|
|
/*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ?
|
|
AP_PROTO_DMA : AP_PROTO_PIO_IN,
|
|
/*data_ptr*/ (uint8_t *)log_dir,
|
|
/*dxfer_len*/ sizeof(*log_dir),
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
|
|
if (retval != 0) {
|
|
xpt_print(periph->path, "scsi_ata_read_log() failed!");
|
|
free(log_dir, M_SCSIDA);
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_LOGDIR;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_ATA_IDDIR:
|
|
{
|
|
struct ata_identify_log_pages *id_dir;
|
|
int retval;
|
|
|
|
retval = 0;
|
|
|
|
/*
|
|
* Check here to see whether the Identify Device log is
|
|
* supported in the directory of logs. If so, continue
|
|
* with requesting the log of identify device pages.
|
|
*/
|
|
if ((softc->flags & DA_FLAG_CAN_ATA_IDLOG) == 0) {
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
id_dir = malloc(sizeof(*id_dir), M_SCSIDA, M_NOWAIT | M_ZERO);
|
|
if (id_dir == NULL) {
|
|
xpt_print(periph->path, "Couldn't malloc id_dir "
|
|
"data\n");
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
retval = scsi_ata_read_log(&start_ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone_probeataiddir,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*log_address*/ ATA_IDENTIFY_DATA_LOG,
|
|
/*page_number*/ ATA_IDL_PAGE_LIST,
|
|
/*block_count*/ 1,
|
|
/*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ?
|
|
AP_PROTO_DMA : AP_PROTO_PIO_IN,
|
|
/*data_ptr*/ (uint8_t *)id_dir,
|
|
/*dxfer_len*/ sizeof(*id_dir),
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
|
|
if (retval != 0) {
|
|
xpt_print(periph->path, "scsi_ata_read_log() failed!");
|
|
free(id_dir, M_SCSIDA);
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_IDDIR;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_ATA_SUP:
|
|
{
|
|
struct ata_identify_log_sup_cap *sup_cap;
|
|
int retval;
|
|
|
|
retval = 0;
|
|
|
|
/*
|
|
* Check here to see whether the Supported Capabilities log
|
|
* is in the list of Identify Device logs.
|
|
*/
|
|
if ((softc->flags & DA_FLAG_CAN_ATA_SUPCAP) == 0) {
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
sup_cap = malloc(sizeof(*sup_cap), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
if (sup_cap == NULL) {
|
|
xpt_print(periph->path, "Couldn't malloc sup_cap "
|
|
"data\n");
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
retval = scsi_ata_read_log(&start_ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone_probeatasup,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*log_address*/ ATA_IDENTIFY_DATA_LOG,
|
|
/*page_number*/ ATA_IDL_SUP_CAP,
|
|
/*block_count*/ 1,
|
|
/*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ?
|
|
AP_PROTO_DMA : AP_PROTO_PIO_IN,
|
|
/*data_ptr*/ (uint8_t *)sup_cap,
|
|
/*dxfer_len*/ sizeof(*sup_cap),
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
|
|
if (retval != 0) {
|
|
xpt_print(periph->path, "scsi_ata_read_log() failed!");
|
|
free(sup_cap, M_SCSIDA);
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
|
|
}
|
|
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_SUP;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_ATA_ZONE:
|
|
{
|
|
struct ata_zoned_info_log *ata_zone;
|
|
int retval;
|
|
|
|
retval = 0;
|
|
|
|
/*
|
|
* Check here to see whether the zoned device information
|
|
* page is supported. If so, continue on to request it.
|
|
* If not, skip to DA_STATE_PROBE_LOG or done.
|
|
*/
|
|
if ((softc->flags & DA_FLAG_CAN_ATA_ZONE) == 0) {
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
ata_zone = malloc(sizeof(*ata_zone), M_SCSIDA,
|
|
M_NOWAIT|M_ZERO);
|
|
if (ata_zone == NULL) {
|
|
xpt_print(periph->path, "Couldn't malloc ata_zone "
|
|
"data\n");
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
|
|
retval = scsi_ata_read_log(&start_ccb->csio,
|
|
/*retries*/ da_retry_count,
|
|
/*cbfcnp*/ dadone_probeatazone,
|
|
/*tag_action*/ MSG_SIMPLE_Q_TAG,
|
|
/*log_address*/ ATA_IDENTIFY_DATA_LOG,
|
|
/*page_number*/ ATA_IDL_ZDI,
|
|
/*block_count*/ 1,
|
|
/*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ?
|
|
AP_PROTO_DMA : AP_PROTO_PIO_IN,
|
|
/*data_ptr*/ (uint8_t *)ata_zone,
|
|
/*dxfer_len*/ sizeof(*ata_zone),
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ da_default_timeout * 1000);
|
|
|
|
if (retval != 0) {
|
|
xpt_print(periph->path, "scsi_ata_read_log() failed!");
|
|
free(ata_zone, M_SCSIDA);
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_ZONE;
|
|
xpt_action(start_ccb);
|
|
|
|
break;
|
|
}
|
|
case DA_STATE_PROBE_ZONE:
|
|
{
|
|
struct scsi_vpd_zoned_bdc *bdc;
|
|
|
|
/*
|
|
* Note that this page will be supported for SCSI protocol
|
|
* devices that support ZBC (SMR devices), as well as ATA
|
|
* protocol devices that are behind a SAT (SCSI to ATA
|
|
* Translation) layer that supports converting ZBC commands
|
|
* to their ZAC equivalents.
|
|
*/
|
|
if (!scsi_vpd_supported_page(periph, SVPD_ZONED_BDC)) {
|
|
daprobedone(periph, start_ccb);
|
|
break;
|
|
}
|
|
bdc = (struct scsi_vpd_zoned_bdc *)
|
|
malloc(sizeof(*bdc), M_SCSIDA, M_NOWAIT|M_ZERO);
|
|
|
|
if (bdc == NULL) {
|
|
xpt_release_ccb(start_ccb);
|
|
xpt_print(periph->path, "Couldn't malloc zone VPD "
|
|
"data\n");
|
|
break;
|
|
}
|
|
scsi_inquiry(&start_ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone_probezone,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
/*inq_buf*/(u_int8_t *)bdc,
|
|
/*inq_len*/sizeof(*bdc),
|
|
/*evpd*/TRUE,
|
|
/*page_code*/SVPD_ZONED_BDC,
|
|
/*sense_len*/SSD_FULL_SIZE,
|
|
/*timeout*/da_default_timeout * 1000);
|
|
start_ccb->ccb_h.ccb_bp = NULL;
|
|
start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ZONE;
|
|
xpt_action(start_ccb);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* In each of the methods below, while its the caller's
|
|
* responsibility to ensure the request will fit into a
|
|
* single device request, we might have changed the delete
|
|
* method due to the device incorrectly advertising either
|
|
* its supported methods or limits.
|
|
*
|
|
* To prevent this causing further issues we validate the
|
|
* against the methods limits, and warn which would
|
|
* otherwise be unnecessary.
|
|
*/
|
|
static void
|
|
da_delete_unmap(struct cam_periph *periph, union ccb *ccb, struct bio *bp)
|
|
{
|
|
struct da_softc *softc = (struct da_softc *)periph->softc;;
|
|
struct bio *bp1;
|
|
uint8_t *buf = softc->unmap_buf;
|
|
struct scsi_unmap_desc *d = (void *)&buf[UNMAP_HEAD_SIZE];
|
|
uint64_t lba, lastlba = (uint64_t)-1;
|
|
uint64_t totalcount = 0;
|
|
uint64_t count;
|
|
uint32_t c, lastcount = 0, ranges = 0;
|
|
|
|
/*
|
|
* Currently this doesn't take the UNMAP
|
|
* Granularity and Granularity Alignment
|
|
* fields into account.
|
|
*
|
|
* This could result in both unoptimal unmap
|
|
* requests as as well as UNMAP calls unmapping
|
|
* fewer LBA's than requested.
|
|
*/
|
|
|
|
bzero(softc->unmap_buf, sizeof(softc->unmap_buf));
|
|
bp1 = bp;
|
|
do {
|
|
/*
|
|
* Note: ada and da are different in how they store the
|
|
* pending bp's in a trim. ada stores all of them in the
|
|
* trim_req.bps. da stores all but the first one in the
|
|
* delete_run_queue. ada then completes all the bps in
|
|
* its adadone() loop. da completes all the bps in the
|
|
* delete_run_queue in dadone, and relies on the biodone
|
|
* after to complete. This should be reconciled since there's
|
|
* no real reason to do it differently. XXX
|
|
*/
|
|
if (bp1 != bp)
|
|
bioq_insert_tail(&softc->delete_run_queue, bp1);
|
|
lba = bp1->bio_pblkno;
|
|
count = bp1->bio_bcount / softc->params.secsize;
|
|
|
|
/* Try to extend the previous range. */
|
|
if (lba == lastlba) {
|
|
c = omin(count, UNMAP_RANGE_MAX - lastcount);
|
|
lastlba += c;
|
|
lastcount += c;
|
|
scsi_ulto4b(lastcount, d[ranges - 1].length);
|
|
count -= c;
|
|
lba += c;
|
|
totalcount += c;
|
|
} else if ((softc->quirks & DA_Q_STRICT_UNMAP) &&
|
|
softc->unmap_gran != 0) {
|
|
/* Align length of the previous range. */
|
|
if ((c = lastcount % softc->unmap_gran) != 0) {
|
|
if (lastcount <= c) {
|
|
totalcount -= lastcount;
|
|
lastlba = (uint64_t)-1;
|
|
lastcount = 0;
|
|
ranges--;
|
|
} else {
|
|
totalcount -= c;
|
|
lastlba -= c;
|
|
lastcount -= c;
|
|
scsi_ulto4b(lastcount,
|
|
d[ranges - 1].length);
|
|
}
|
|
}
|
|
/* Align beginning of the new range. */
|
|
c = (lba - softc->unmap_gran_align) % softc->unmap_gran;
|
|
if (c != 0) {
|
|
c = softc->unmap_gran - c;
|
|
if (count <= c) {
|
|
count = 0;
|
|
} else {
|
|
lba += c;
|
|
count -= c;
|
|
}
|
|
}
|
|
}
|
|
|
|
while (count > 0) {
|
|
c = omin(count, UNMAP_RANGE_MAX);
|
|
if (totalcount + c > softc->unmap_max_lba ||
|
|
ranges >= softc->unmap_max_ranges) {
|
|
xpt_print(periph->path,
|
|
"%s issuing short delete %ld > %ld"
|
|
"|| %d >= %d",
|
|
da_delete_method_desc[softc->delete_method],
|
|
totalcount + c, softc->unmap_max_lba,
|
|
ranges, softc->unmap_max_ranges);
|
|
break;
|
|
}
|
|
scsi_u64to8b(lba, d[ranges].lba);
|
|
scsi_ulto4b(c, d[ranges].length);
|
|
lba += c;
|
|
totalcount += c;
|
|
ranges++;
|
|
count -= c;
|
|
lastlba = lba;
|
|
lastcount = c;
|
|
}
|
|
bp1 = cam_iosched_next_trim(softc->cam_iosched);
|
|
if (bp1 == NULL)
|
|
break;
|
|
if (ranges >= softc->unmap_max_ranges ||
|
|
totalcount + bp1->bio_bcount /
|
|
softc->params.secsize > softc->unmap_max_lba) {
|
|
cam_iosched_put_back_trim(softc->cam_iosched, bp1);
|
|
break;
|
|
}
|
|
} while (1);
|
|
|
|
/* Align length of the last range. */
|
|
if ((softc->quirks & DA_Q_STRICT_UNMAP) && softc->unmap_gran != 0 &&
|
|
(c = lastcount % softc->unmap_gran) != 0) {
|
|
if (lastcount <= c)
|
|
ranges--;
|
|
else
|
|
scsi_ulto4b(lastcount - c, d[ranges - 1].length);
|
|
}
|
|
|
|
scsi_ulto2b(ranges * 16 + 6, &buf[0]);
|
|
scsi_ulto2b(ranges * 16, &buf[2]);
|
|
|
|
scsi_unmap(&ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
/*byte2*/0,
|
|
/*data_ptr*/ buf,
|
|
/*dxfer_len*/ ranges * 16 + 8,
|
|
/*sense_len*/SSD_FULL_SIZE,
|
|
da_default_timeout * 1000);
|
|
ccb->ccb_h.ccb_state = DA_CCB_DELETE;
|
|
ccb->ccb_h.flags |= CAM_UNLOCKED;
|
|
softc->trim_count++;
|
|
softc->trim_ranges += ranges;
|
|
softc->trim_lbas += totalcount;
|
|
cam_iosched_submit_trim(softc->cam_iosched);
|
|
}
|
|
|
|
static void
|
|
da_delete_trim(struct cam_periph *periph, union ccb *ccb, struct bio *bp)
|
|
{
|
|
struct da_softc *softc = (struct da_softc *)periph->softc;
|
|
struct bio *bp1;
|
|
uint8_t *buf = softc->unmap_buf;
|
|
uint64_t lastlba = (uint64_t)-1;
|
|
uint64_t count;
|
|
uint64_t lba;
|
|
uint32_t lastcount = 0, c, requestcount;
|
|
int ranges = 0, off, block_count;
|
|
|
|
bzero(softc->unmap_buf, sizeof(softc->unmap_buf));
|
|
bp1 = bp;
|
|
do {
|
|
if (bp1 != bp)//XXX imp XXX
|
|
bioq_insert_tail(&softc->delete_run_queue, bp1);
|
|
lba = bp1->bio_pblkno;
|
|
count = bp1->bio_bcount / softc->params.secsize;
|
|
requestcount = count;
|
|
|
|
/* Try to extend the previous range. */
|
|
if (lba == lastlba) {
|
|
c = omin(count, ATA_DSM_RANGE_MAX - lastcount);
|
|
lastcount += c;
|
|
off = (ranges - 1) * 8;
|
|
buf[off + 6] = lastcount & 0xff;
|
|
buf[off + 7] = (lastcount >> 8) & 0xff;
|
|
count -= c;
|
|
lba += c;
|
|
}
|
|
|
|
while (count > 0) {
|
|
c = omin(count, ATA_DSM_RANGE_MAX);
|
|
off = ranges * 8;
|
|
|
|
buf[off + 0] = lba & 0xff;
|
|
buf[off + 1] = (lba >> 8) & 0xff;
|
|
buf[off + 2] = (lba >> 16) & 0xff;
|
|
buf[off + 3] = (lba >> 24) & 0xff;
|
|
buf[off + 4] = (lba >> 32) & 0xff;
|
|
buf[off + 5] = (lba >> 40) & 0xff;
|
|
buf[off + 6] = c & 0xff;
|
|
buf[off + 7] = (c >> 8) & 0xff;
|
|
lba += c;
|
|
ranges++;
|
|
count -= c;
|
|
lastcount = c;
|
|
if (count != 0 && ranges == softc->trim_max_ranges) {
|
|
xpt_print(periph->path,
|
|
"%s issuing short delete %ld > %ld\n",
|
|
da_delete_method_desc[softc->delete_method],
|
|
requestcount,
|
|
(softc->trim_max_ranges - ranges) *
|
|
ATA_DSM_RANGE_MAX);
|
|
break;
|
|
}
|
|
}
|
|
lastlba = lba;
|
|
bp1 = cam_iosched_next_trim(softc->cam_iosched);
|
|
if (bp1 == NULL)
|
|
break;
|
|
if (bp1->bio_bcount / softc->params.secsize >
|
|
(softc->trim_max_ranges - ranges) * ATA_DSM_RANGE_MAX) {
|
|
cam_iosched_put_back_trim(softc->cam_iosched, bp1);
|
|
break;
|
|
}
|
|
} while (1);
|
|
|
|
block_count = howmany(ranges, ATA_DSM_BLK_RANGES);
|
|
scsi_ata_trim(&ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
block_count,
|
|
/*data_ptr*/buf,
|
|
/*dxfer_len*/block_count * ATA_DSM_BLK_SIZE,
|
|
/*sense_len*/SSD_FULL_SIZE,
|
|
da_default_timeout * 1000);
|
|
ccb->ccb_h.ccb_state = DA_CCB_DELETE;
|
|
ccb->ccb_h.flags |= CAM_UNLOCKED;
|
|
cam_iosched_submit_trim(softc->cam_iosched);
|
|
}
|
|
|
|
/*
|
|
* We calculate ws_max_blks here based off d_delmaxsize instead
|
|
* of using softc->ws_max_blks as it is absolute max for the
|
|
* device not the protocol max which may well be lower.
|
|
*/
|
|
static void
|
|
da_delete_ws(struct cam_periph *periph, union ccb *ccb, struct bio *bp)
|
|
{
|
|
struct da_softc *softc;
|
|
struct bio *bp1;
|
|
uint64_t ws_max_blks;
|
|
uint64_t lba;
|
|
uint64_t count; /* forward compat with WS32 */
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
ws_max_blks = softc->disk->d_delmaxsize / softc->params.secsize;
|
|
lba = bp->bio_pblkno;
|
|
count = 0;
|
|
bp1 = bp;
|
|
do {
|
|
if (bp1 != bp)//XXX imp XXX
|
|
bioq_insert_tail(&softc->delete_run_queue, bp1);
|
|
count += bp1->bio_bcount / softc->params.secsize;
|
|
if (count > ws_max_blks) {
|
|
xpt_print(periph->path,
|
|
"%s issuing short delete %ld > %ld\n",
|
|
da_delete_method_desc[softc->delete_method],
|
|
count, ws_max_blks);
|
|
count = omin(count, ws_max_blks);
|
|
break;
|
|
}
|
|
bp1 = cam_iosched_next_trim(softc->cam_iosched);
|
|
if (bp1 == NULL)
|
|
break;
|
|
if (lba + count != bp1->bio_pblkno ||
|
|
count + bp1->bio_bcount /
|
|
softc->params.secsize > ws_max_blks) {
|
|
cam_iosched_put_back_trim(softc->cam_iosched, bp1);
|
|
break;
|
|
}
|
|
} while (1);
|
|
|
|
scsi_write_same(&ccb->csio,
|
|
/*retries*/da_retry_count,
|
|
/*cbfcnp*/dadone,
|
|
/*tag_action*/MSG_SIMPLE_Q_TAG,
|
|
/*byte2*/softc->delete_method ==
|
|
DA_DELETE_ZERO ? 0 : SWS_UNMAP,
|
|
softc->delete_method == DA_DELETE_WS16 ? 16 : 10,
|
|
/*lba*/lba,
|
|
/*block_count*/count,
|
|
/*data_ptr*/ __DECONST(void *, zero_region),
|
|
/*dxfer_len*/ softc->params.secsize,
|
|
/*sense_len*/SSD_FULL_SIZE,
|
|
da_default_timeout * 1000);
|
|
ccb->ccb_h.ccb_state = DA_CCB_DELETE;
|
|
ccb->ccb_h.flags |= CAM_UNLOCKED;
|
|
cam_iosched_submit_trim(softc->cam_iosched);
|
|
}
|
|
|
|
static int
|
|
cmd6workaround(union ccb *ccb)
|
|
{
|
|
struct scsi_rw_6 cmd6;
|
|
struct scsi_rw_10 *cmd10;
|
|
struct da_softc *softc;
|
|
u_int8_t *cdb;
|
|
struct bio *bp;
|
|
int frozen;
|
|
|
|
cdb = ccb->csio.cdb_io.cdb_bytes;
|
|
softc = (struct da_softc *)xpt_path_periph(ccb->ccb_h.path)->softc;
|
|
|
|
if (ccb->ccb_h.ccb_state == DA_CCB_DELETE) {
|
|
da_delete_methods old_method = softc->delete_method;
|
|
|
|
/*
|
|
* Typically there are two reasons for failure here
|
|
* 1. Delete method was detected as supported but isn't
|
|
* 2. Delete failed due to invalid params e.g. too big
|
|
*
|
|
* While we will attempt to choose an alternative delete method
|
|
* this may result in short deletes if the existing delete
|
|
* requests from geom are big for the new method chosen.
|
|
*
|
|
* This method assumes that the error which triggered this
|
|
* will not retry the io otherwise a panic will occur
|
|
*/
|
|
dadeleteflag(softc, old_method, 0);
|
|
dadeletemethodchoose(softc, DA_DELETE_DISABLE);
|
|
if (softc->delete_method == DA_DELETE_DISABLE)
|
|
xpt_print(ccb->ccb_h.path,
|
|
"%s failed, disabling BIO_DELETE\n",
|
|
da_delete_method_desc[old_method]);
|
|
else
|
|
xpt_print(ccb->ccb_h.path,
|
|
"%s failed, switching to %s BIO_DELETE\n",
|
|
da_delete_method_desc[old_method],
|
|
da_delete_method_desc[softc->delete_method]);
|
|
|
|
while ((bp = bioq_takefirst(&softc->delete_run_queue)) != NULL)
|
|
cam_iosched_queue_work(softc->cam_iosched, bp);
|
|
cam_iosched_queue_work(softc->cam_iosched,
|
|
(struct bio *)ccb->ccb_h.ccb_bp);
|
|
ccb->ccb_h.ccb_bp = NULL;
|
|
return (0);
|
|
}
|
|
|
|
/* Detect unsupported PREVENT ALLOW MEDIUM REMOVAL. */
|
|
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) == 0 &&
|
|
(*cdb == PREVENT_ALLOW) &&
|
|
(softc->quirks & DA_Q_NO_PREVENT) == 0) {
|
|
if (bootverbose)
|
|
xpt_print(ccb->ccb_h.path,
|
|
"PREVENT ALLOW MEDIUM REMOVAL not supported.\n");
|
|
softc->quirks |= DA_Q_NO_PREVENT;
|
|
return (0);
|
|
}
|
|
|
|
/* Detect unsupported SYNCHRONIZE CACHE(10). */
|
|
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) == 0 &&
|
|
(*cdb == SYNCHRONIZE_CACHE) &&
|
|
(softc->quirks & DA_Q_NO_SYNC_CACHE) == 0) {
|
|
if (bootverbose)
|
|
xpt_print(ccb->ccb_h.path,
|
|
"SYNCHRONIZE CACHE(10) not supported.\n");
|
|
softc->quirks |= DA_Q_NO_SYNC_CACHE;
|
|
softc->disk->d_flags &= ~DISKFLAG_CANFLUSHCACHE;
|
|
return (0);
|
|
}
|
|
|
|
/* Translation only possible if CDB is an array and cmd is R/W6 */
|
|
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0 ||
|
|
(*cdb != READ_6 && *cdb != WRITE_6))
|
|
return 0;
|
|
|
|
xpt_print(ccb->ccb_h.path, "READ(6)/WRITE(6) not supported, "
|
|
"increasing minimum_cmd_size to 10.\n");
|
|
softc->minimum_cmd_size = 10;
|
|
|
|
bcopy(cdb, &cmd6, sizeof(struct scsi_rw_6));
|
|
cmd10 = (struct scsi_rw_10 *)cdb;
|
|
cmd10->opcode = (cmd6.opcode == READ_6) ? READ_10 : WRITE_10;
|
|
cmd10->byte2 = 0;
|
|
scsi_ulto4b(scsi_3btoul(cmd6.addr), cmd10->addr);
|
|
cmd10->reserved = 0;
|
|
scsi_ulto2b(cmd6.length, cmd10->length);
|
|
cmd10->control = cmd6.control;
|
|
ccb->csio.cdb_len = sizeof(*cmd10);
|
|
|
|
/* Requeue request, unfreezing queue if necessary */
|
|
frozen = (ccb->ccb_h.status & CAM_DEV_QFRZN) != 0;
|
|
ccb->ccb_h.status = CAM_REQUEUE_REQ;
|
|
xpt_action(ccb);
|
|
if (frozen) {
|
|
cam_release_devq(ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
return (ERESTART);
|
|
}
|
|
|
|
static void
|
|
dazonedone(struct cam_periph *periph, union ccb *ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
struct bio *bp;
|
|
|
|
softc = periph->softc;
|
|
bp = (struct bio *)ccb->ccb_h.ccb_bp;
|
|
|
|
switch (bp->bio_zone.zone_cmd) {
|
|
case DISK_ZONE_OPEN:
|
|
case DISK_ZONE_CLOSE:
|
|
case DISK_ZONE_FINISH:
|
|
case DISK_ZONE_RWP:
|
|
break;
|
|
case DISK_ZONE_REPORT_ZONES: {
|
|
uint32_t avail_len;
|
|
struct disk_zone_report *rep;
|
|
struct scsi_report_zones_hdr *hdr;
|
|
struct scsi_report_zones_desc *desc;
|
|
struct disk_zone_rep_entry *entry;
|
|
uint32_t hdr_len, num_avail;
|
|
uint32_t num_to_fill, i;
|
|
int ata;
|
|
|
|
rep = &bp->bio_zone.zone_params.report;
|
|
avail_len = ccb->csio.dxfer_len - ccb->csio.resid;
|
|
/*
|
|
* Note that bio_resid isn't normally used for zone
|
|
* commands, but it is used by devstat_end_transaction_bio()
|
|
* to determine how much data was transferred. Because
|
|
* the size of the SCSI/ATA data structures is different
|
|
* than the size of the BIO interface structures, the
|
|
* amount of data actually transferred from the drive will
|
|
* be different than the amount of data transferred to
|
|
* the user.
|
|
*/
|
|
bp->bio_resid = ccb->csio.resid;
|
|
hdr = (struct scsi_report_zones_hdr *)ccb->csio.data_ptr;
|
|
if (avail_len < sizeof(*hdr)) {
|
|
/*
|
|
* Is there a better error than EIO here? We asked
|
|
* for at least the header, and we got less than
|
|
* that.
|
|
*/
|
|
bp->bio_error = EIO;
|
|
bp->bio_flags |= BIO_ERROR;
|
|
bp->bio_resid = bp->bio_bcount;
|
|
break;
|
|
}
|
|
|
|
if (softc->zone_interface == DA_ZONE_IF_ATA_PASS)
|
|
ata = 1;
|
|
else
|
|
ata = 0;
|
|
|
|
hdr_len = ata ? le32dec(hdr->length) :
|
|
scsi_4btoul(hdr->length);
|
|
if (hdr_len > 0)
|
|
rep->entries_available = hdr_len / sizeof(*desc);
|
|
else
|
|
rep->entries_available = 0;
|
|
/*
|
|
* NOTE: using the same values for the BIO version of the
|
|
* same field as the SCSI/ATA values. This means we could
|
|
* get some additional values that aren't defined in bio.h
|
|
* if more values of the same field are defined later.
|
|
*/
|
|
rep->header.same = hdr->byte4 & SRZ_SAME_MASK;
|
|
rep->header.maximum_lba = ata ? le64dec(hdr->maximum_lba) :
|
|
scsi_8btou64(hdr->maximum_lba);
|
|
/*
|
|
* If the drive reports no entries that match the query,
|
|
* we're done.
|
|
*/
|
|
if (hdr_len == 0) {
|
|
rep->entries_filled = 0;
|
|
break;
|
|
}
|
|
|
|
num_avail = min((avail_len - sizeof(*hdr)) / sizeof(*desc),
|
|
hdr_len / sizeof(*desc));
|
|
/*
|
|
* If the drive didn't return any data, then we're done.
|
|
*/
|
|
if (num_avail == 0) {
|
|
rep->entries_filled = 0;
|
|
break;
|
|
}
|
|
|
|
num_to_fill = min(num_avail, rep->entries_allocated);
|
|
/*
|
|
* If the user didn't allocate any entries for us to fill,
|
|
* we're done.
|
|
*/
|
|
if (num_to_fill == 0) {
|
|
rep->entries_filled = 0;
|
|
break;
|
|
}
|
|
|
|
for (i = 0, desc = &hdr->desc_list[0], entry=&rep->entries[0];
|
|
i < num_to_fill; i++, desc++, entry++) {
|
|
/*
|
|
* NOTE: we're mapping the values here directly
|
|
* from the SCSI/ATA bit definitions to the bio.h
|
|
* definitons. There is also a warning in
|
|
* disk_zone.h, but the impact is that if
|
|
* additional values are added in the SCSI/ATA
|
|
* specs these will be visible to consumers of
|
|
* this interface.
|
|
*/
|
|
entry->zone_type = desc->zone_type & SRZ_TYPE_MASK;
|
|
entry->zone_condition =
|
|
(desc->zone_flags & SRZ_ZONE_COND_MASK) >>
|
|
SRZ_ZONE_COND_SHIFT;
|
|
entry->zone_flags |= desc->zone_flags &
|
|
(SRZ_ZONE_NON_SEQ|SRZ_ZONE_RESET);
|
|
entry->zone_length =
|
|
ata ? le64dec(desc->zone_length) :
|
|
scsi_8btou64(desc->zone_length);
|
|
entry->zone_start_lba =
|
|
ata ? le64dec(desc->zone_start_lba) :
|
|
scsi_8btou64(desc->zone_start_lba);
|
|
entry->write_pointer_lba =
|
|
ata ? le64dec(desc->write_pointer_lba) :
|
|
scsi_8btou64(desc->write_pointer_lba);
|
|
}
|
|
rep->entries_filled = num_to_fill;
|
|
break;
|
|
}
|
|
case DISK_ZONE_GET_PARAMS:
|
|
default:
|
|
/*
|
|
* In theory we should not get a GET_PARAMS bio, since it
|
|
* should be handled without queueing the command to the
|
|
* drive.
|
|
*/
|
|
panic("%s: Invalid zone command %d", __func__,
|
|
bp->bio_zone.zone_cmd);
|
|
break;
|
|
}
|
|
|
|
if (bp->bio_zone.zone_cmd == DISK_ZONE_REPORT_ZONES)
|
|
free(ccb->csio.data_ptr, M_SCSIDA);
|
|
}
|
|
|
|
static void
|
|
dadone(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct bio *bp, *bp1;
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
da_ccb_state state;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
|
|
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
|
|
if (csio->bio != NULL)
|
|
biotrack(csio->bio, __func__);
|
|
#endif
|
|
state = csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK;
|
|
|
|
cam_periph_lock(periph);
|
|
bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
|
|
if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
|
|
int error;
|
|
int sf;
|
|
|
|
if ((csio->ccb_h.ccb_state & DA_CCB_RETRY_UA) != 0)
|
|
sf = SF_RETRY_UA;
|
|
else
|
|
sf = 0;
|
|
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO, sf);
|
|
if (error == ERESTART) {
|
|
/* A retry was scheduled, so just return. */
|
|
cam_periph_unlock(periph);
|
|
return;
|
|
}
|
|
bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
|
|
if (error != 0) {
|
|
int queued_error;
|
|
|
|
/*
|
|
* return all queued I/O with EIO, so that
|
|
* the client can retry these I/Os in the
|
|
* proper order should it attempt to recover.
|
|
*/
|
|
queued_error = EIO;
|
|
|
|
if (error == ENXIO
|
|
&& (softc->flags & DA_FLAG_PACK_INVALID)== 0) {
|
|
/*
|
|
* Catastrophic error. Mark our pack as
|
|
* invalid.
|
|
*
|
|
* XXX See if this is really a media
|
|
* XXX change first?
|
|
*/
|
|
xpt_print(periph->path, "Invalidating pack\n");
|
|
softc->flags |= DA_FLAG_PACK_INVALID;
|
|
#ifdef CAM_IO_STATS
|
|
softc->invalidations++;
|
|
#endif
|
|
queued_error = ENXIO;
|
|
}
|
|
cam_iosched_flush(softc->cam_iosched, NULL,
|
|
queued_error);
|
|
if (bp != NULL) {
|
|
bp->bio_error = error;
|
|
bp->bio_resid = bp->bio_bcount;
|
|
bp->bio_flags |= BIO_ERROR;
|
|
}
|
|
} else if (bp != NULL) {
|
|
if (state == DA_CCB_DELETE)
|
|
bp->bio_resid = 0;
|
|
else
|
|
bp->bio_resid = csio->resid;
|
|
bp->bio_error = 0;
|
|
if (bp->bio_resid != 0)
|
|
bp->bio_flags |= BIO_ERROR;
|
|
}
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
} else if (bp != NULL) {
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
|
|
panic("REQ_CMP with QFRZN");
|
|
if (bp->bio_cmd == BIO_ZONE)
|
|
dazonedone(periph, done_ccb);
|
|
else if (state == DA_CCB_DELETE)
|
|
bp->bio_resid = 0;
|
|
else
|
|
bp->bio_resid = csio->resid;
|
|
if ((csio->resid > 0) && (bp->bio_cmd != BIO_ZONE))
|
|
bp->bio_flags |= BIO_ERROR;
|
|
if (softc->error_inject != 0) {
|
|
bp->bio_error = softc->error_inject;
|
|
bp->bio_resid = bp->bio_bcount;
|
|
bp->bio_flags |= BIO_ERROR;
|
|
softc->error_inject = 0;
|
|
}
|
|
}
|
|
|
|
if (bp != NULL)
|
|
biotrack(bp, __func__);
|
|
LIST_REMOVE(&done_ccb->ccb_h, periph_links.le);
|
|
if (LIST_EMPTY(&softc->pending_ccbs))
|
|
softc->flags |= DA_FLAG_WAS_OTAG;
|
|
|
|
/*
|
|
* We need to call cam_iosched before we call biodone so that we don't
|
|
* measure any activity that happens in the completion routine, which in
|
|
* the case of sendfile can be quite extensive. Release the periph
|
|
* refcount taken in dastart() for each CCB.
|
|
*/
|
|
cam_iosched_bio_complete(softc->cam_iosched, bp, done_ccb);
|
|
xpt_release_ccb(done_ccb);
|
|
KASSERT(softc->refcount >= 1, ("dadone softc %p refcount %d", softc, softc->refcount));
|
|
softc->refcount--;
|
|
if (state == DA_CCB_DELETE) {
|
|
TAILQ_HEAD(, bio) queue;
|
|
|
|
TAILQ_INIT(&queue);
|
|
TAILQ_CONCAT(&queue, &softc->delete_run_queue.queue, bio_queue);
|
|
softc->delete_run_queue.insert_point = NULL;
|
|
/*
|
|
* Normally, the xpt_release_ccb() above would make sure
|
|
* that when we have more work to do, that work would
|
|
* get kicked off. However, we specifically keep
|
|
* delete_running set to 0 before the call above to
|
|
* allow other I/O to progress when many BIO_DELETE
|
|
* requests are pushed down. We set delete_running to 0
|
|
* and call daschedule again so that we don't stall if
|
|
* there are no other I/Os pending apart from BIO_DELETEs.
|
|
*/
|
|
cam_iosched_trim_done(softc->cam_iosched);
|
|
daschedule(periph);
|
|
cam_periph_unlock(periph);
|
|
while ((bp1 = TAILQ_FIRST(&queue)) != NULL) {
|
|
TAILQ_REMOVE(&queue, bp1, bio_queue);
|
|
bp1->bio_error = bp->bio_error;
|
|
if (bp->bio_flags & BIO_ERROR) {
|
|
bp1->bio_flags |= BIO_ERROR;
|
|
bp1->bio_resid = bp1->bio_bcount;
|
|
} else
|
|
bp1->bio_resid = 0;
|
|
biodone(bp1);
|
|
}
|
|
} else {
|
|
daschedule(periph);
|
|
cam_periph_unlock(periph);
|
|
}
|
|
if (bp != NULL)
|
|
biodone(bp);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probewp(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct scsi_mode_header_6 *mode_hdr6;
|
|
struct scsi_mode_header_10 *mode_hdr10;
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
uint8_t dev_spec;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probewp\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
KASSERT(softc->state == DA_STATE_PROBE_WP,
|
|
("State (%d) not PROBE_WP in dadone_probewp, periph %p ccb %p",
|
|
softc->state, periph, done_ccb));
|
|
KASSERT((csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK) == DA_CCB_PROBE_WP,
|
|
("CCB State (%lu) not PROBE_WP in dadone_probewp, periph %p ccb %p",
|
|
(unsigned long)csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK, periph,
|
|
done_ccb));
|
|
|
|
if (softc->minimum_cmd_size > 6) {
|
|
mode_hdr10 = (struct scsi_mode_header_10 *)csio->data_ptr;
|
|
dev_spec = mode_hdr10->dev_spec;
|
|
} else {
|
|
mode_hdr6 = (struct scsi_mode_header_6 *)csio->data_ptr;
|
|
dev_spec = mode_hdr6->dev_spec;
|
|
}
|
|
if (cam_ccb_status(done_ccb) == CAM_REQ_CMP) {
|
|
if ((dev_spec & 0x80) != 0)
|
|
softc->disk->d_flags |= DISKFLAG_WRITE_PROTECT;
|
|
else
|
|
softc->disk->d_flags &= ~DISKFLAG_WRITE_PROTECT;
|
|
} else {
|
|
int error;
|
|
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
}
|
|
|
|
free(csio->data_ptr, M_SCSIDA);
|
|
if ((softc->flags & DA_FLAG_CAN_RC16) != 0)
|
|
softc->state = DA_STATE_PROBE_RC16;
|
|
else
|
|
softc->state = DA_STATE_PROBE_RC;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_proberc(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct scsi_read_capacity_data *rdcap;
|
|
struct scsi_read_capacity_data_long *rcaplong;
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
da_ccb_state state;
|
|
char *announce_buf;
|
|
u_int32_t priority;
|
|
int lbp, n;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_proberc\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
state = csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK;
|
|
|
|
KASSERT(softc->state == DA_STATE_PROBE_RC || softc->state == DA_STATE_PROBE_RC16,
|
|
("State (%d) not PROBE_RC* in dadone_proberc, periph %p ccb %p",
|
|
softc->state, periph, done_ccb));
|
|
KASSERT(state == DA_CCB_PROBE_RC || state == DA_CCB_PROBE_RC16,
|
|
("CCB State (%lu) not PROBE_RC* in dadone_probewp, periph %p ccb %p",
|
|
(unsigned long)state, periph, done_ccb));
|
|
|
|
lbp = 0;
|
|
rdcap = NULL;
|
|
rcaplong = NULL;
|
|
/* XXX TODO: can this be a malloc? */
|
|
announce_buf = softc->announce_temp;
|
|
bzero(announce_buf, DA_ANNOUNCETMP_SZ);
|
|
|
|
if (state == DA_CCB_PROBE_RC)
|
|
rdcap =(struct scsi_read_capacity_data *)csio->data_ptr;
|
|
else
|
|
rcaplong = (struct scsi_read_capacity_data_long *)
|
|
csio->data_ptr;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
struct disk_params *dp;
|
|
uint32_t block_size;
|
|
uint64_t maxsector;
|
|
u_int lalba; /* Lowest aligned LBA. */
|
|
|
|
if (state == DA_CCB_PROBE_RC) {
|
|
block_size = scsi_4btoul(rdcap->length);
|
|
maxsector = scsi_4btoul(rdcap->addr);
|
|
lalba = 0;
|
|
|
|
/*
|
|
* According to SBC-2, if the standard 10
|
|
* byte READ CAPACITY command returns 2^32,
|
|
* we should issue the 16 byte version of
|
|
* the command, since the device in question
|
|
* has more sectors than can be represented
|
|
* with the short version of the command.
|
|
*/
|
|
if (maxsector == 0xffffffff) {
|
|
free(rdcap, M_SCSIDA);
|
|
softc->state = DA_STATE_PROBE_RC16;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
} else {
|
|
block_size = scsi_4btoul(rcaplong->length);
|
|
maxsector = scsi_8btou64(rcaplong->addr);
|
|
lalba = scsi_2btoul(rcaplong->lalba_lbp);
|
|
}
|
|
|
|
/*
|
|
* Because GEOM code just will panic us if we
|
|
* give them an 'illegal' value we'll avoid that
|
|
* here.
|
|
*/
|
|
if (block_size == 0) {
|
|
block_size = 512;
|
|
if (maxsector == 0)
|
|
maxsector = -1;
|
|
}
|
|
if (block_size >= MAXPHYS) {
|
|
xpt_print(periph->path,
|
|
"unsupportable block size %ju\n",
|
|
(uintmax_t) block_size);
|
|
announce_buf = NULL;
|
|
cam_periph_invalidate(periph);
|
|
} else {
|
|
/*
|
|
* We pass rcaplong into dasetgeom(),
|
|
* because it will only use it if it is
|
|
* non-NULL.
|
|
*/
|
|
dasetgeom(periph, block_size, maxsector,
|
|
rcaplong, sizeof(*rcaplong));
|
|
lbp = (lalba & SRC16_LBPME_A);
|
|
dp = &softc->params;
|
|
n = snprintf(announce_buf, DA_ANNOUNCETMP_SZ,
|
|
"%juMB (%ju %u byte sectors",
|
|
((uintmax_t)dp->secsize * dp->sectors) /
|
|
(1024 * 1024),
|
|
(uintmax_t)dp->sectors, dp->secsize);
|
|
if (softc->p_type != 0) {
|
|
n += snprintf(announce_buf + n,
|
|
DA_ANNOUNCETMP_SZ - n,
|
|
", DIF type %d", softc->p_type);
|
|
}
|
|
snprintf(announce_buf + n, DA_ANNOUNCETMP_SZ - n, ")");
|
|
}
|
|
} else {
|
|
int error;
|
|
|
|
/*
|
|
* Retry any UNIT ATTENTION type errors. They
|
|
* are expected at boot.
|
|
*/
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART) {
|
|
/*
|
|
* A retry was scheuled, so
|
|
* just return.
|
|
*/
|
|
return;
|
|
} else if (error != 0) {
|
|
int asc, ascq;
|
|
int sense_key, error_code;
|
|
int have_sense;
|
|
cam_status status;
|
|
struct ccb_getdev cgd;
|
|
|
|
/* Don't wedge this device's queue */
|
|
status = done_ccb->ccb_h.status;
|
|
if ((status & CAM_DEV_QFRZN) != 0)
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
|
|
|
|
xpt_setup_ccb(&cgd.ccb_h, done_ccb->ccb_h.path,
|
|
CAM_PRIORITY_NORMAL);
|
|
cgd.ccb_h.func_code = XPT_GDEV_TYPE;
|
|
xpt_action((union ccb *)&cgd);
|
|
|
|
if (scsi_extract_sense_ccb(done_ccb,
|
|
&error_code, &sense_key, &asc, &ascq))
|
|
have_sense = TRUE;
|
|
else
|
|
have_sense = FALSE;
|
|
|
|
/*
|
|
* If we tried READ CAPACITY(16) and failed,
|
|
* fallback to READ CAPACITY(10).
|
|
*/
|
|
if ((state == DA_CCB_PROBE_RC16) &&
|
|
(softc->flags & DA_FLAG_CAN_RC16) &&
|
|
(((csio->ccb_h.status & CAM_STATUS_MASK) ==
|
|
CAM_REQ_INVALID) ||
|
|
((have_sense) &&
|
|
(error_code == SSD_CURRENT_ERROR ||
|
|
error_code == SSD_DESC_CURRENT_ERROR) &&
|
|
(sense_key == SSD_KEY_ILLEGAL_REQUEST)))) {
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
softc->flags &= ~DA_FLAG_CAN_RC16;
|
|
free(rdcap, M_SCSIDA);
|
|
softc->state = DA_STATE_PROBE_RC;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Attach to anything that claims to be a
|
|
* direct access or optical disk device,
|
|
* as long as it doesn't return a "Logical
|
|
* unit not supported" (0x25) error.
|
|
* "Internal Target Failure" (0x44) is also
|
|
* special and typically means that the
|
|
* device is a SATA drive behind a SATL
|
|
* translation that's fallen into a
|
|
* terminally fatal state.
|
|
*/
|
|
if ((have_sense)
|
|
&& (asc != 0x25) && (asc != 0x44)
|
|
&& (error_code == SSD_CURRENT_ERROR
|
|
|| error_code == SSD_DESC_CURRENT_ERROR)) {
|
|
const char *sense_key_desc;
|
|
const char *asc_desc;
|
|
|
|
dasetgeom(periph, 512, -1, NULL, 0);
|
|
scsi_sense_desc(sense_key, asc, ascq,
|
|
&cgd.inq_data, &sense_key_desc,
|
|
&asc_desc);
|
|
snprintf(announce_buf, DA_ANNOUNCETMP_SZ,
|
|
"Attempt to query device "
|
|
"size failed: %s, %s",
|
|
sense_key_desc, asc_desc);
|
|
} else {
|
|
if (have_sense)
|
|
scsi_sense_print(&done_ccb->csio);
|
|
else {
|
|
xpt_print(periph->path,
|
|
"got CAM status %#x\n",
|
|
done_ccb->ccb_h.status);
|
|
}
|
|
|
|
xpt_print(periph->path, "fatal error, "
|
|
"failed to attach to device\n");
|
|
|
|
announce_buf = NULL;
|
|
|
|
/*
|
|
* Free up resources.
|
|
*/
|
|
cam_periph_invalidate(periph);
|
|
}
|
|
}
|
|
}
|
|
free(csio->data_ptr, M_SCSIDA);
|
|
if (announce_buf != NULL &&
|
|
((softc->flags & DA_FLAG_ANNOUNCED) == 0)) {
|
|
struct sbuf sb;
|
|
|
|
sbuf_new(&sb, softc->announcebuf, DA_ANNOUNCE_SZ,
|
|
SBUF_FIXEDLEN);
|
|
xpt_announce_periph_sbuf(periph, &sb, announce_buf);
|
|
xpt_announce_quirks_sbuf(periph, &sb, softc->quirks,
|
|
DA_Q_BIT_STRING);
|
|
sbuf_finish(&sb);
|
|
sbuf_putbuf(&sb);
|
|
|
|
/*
|
|
* Create our sysctl variables, now that we know
|
|
* we have successfully attached.
|
|
*/
|
|
/* increase the refcount */
|
|
if (da_periph_acquire(periph, DA_REF_SYSCTL) == 0) {
|
|
taskqueue_enqueue(taskqueue_thread,
|
|
&softc->sysctl_task);
|
|
} else {
|
|
/* XXX This message is useless! */
|
|
xpt_print(periph->path, "fatal error, "
|
|
"could not acquire reference count\n");
|
|
}
|
|
}
|
|
|
|
/* We already probed the device. */
|
|
if (softc->flags & DA_FLAG_PROBED) {
|
|
daprobedone(periph, done_ccb);
|
|
return;
|
|
}
|
|
|
|
/* Ensure re-probe doesn't see old delete. */
|
|
softc->delete_available = 0;
|
|
dadeleteflag(softc, DA_DELETE_ZERO, 1);
|
|
if (lbp && (softc->quirks & DA_Q_NO_UNMAP) == 0) {
|
|
/*
|
|
* Based on older SBC-3 spec revisions
|
|
* any of the UNMAP methods "may" be
|
|
* available via LBP given this flag so
|
|
* we flag all of them as available and
|
|
* then remove those which further
|
|
* probes confirm aren't available
|
|
* later.
|
|
*
|
|
* We could also check readcap(16) p_type
|
|
* flag to exclude one or more invalid
|
|
* write same (X) types here
|
|
*/
|
|
dadeleteflag(softc, DA_DELETE_WS16, 1);
|
|
dadeleteflag(softc, DA_DELETE_WS10, 1);
|
|
dadeleteflag(softc, DA_DELETE_UNMAP, 1);
|
|
|
|
softc->state = DA_STATE_PROBE_LBP;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
softc->state = DA_STATE_PROBE_BDC;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probelbp(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct scsi_vpd_logical_block_prov *lbp;
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probelbp\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
lbp = (struct scsi_vpd_logical_block_prov *)csio->data_ptr;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
/*
|
|
* T10/1799-D Revision 31 states at least one of these
|
|
* must be supported but we don't currently enforce this.
|
|
*/
|
|
dadeleteflag(softc, DA_DELETE_WS16,
|
|
(lbp->flags & SVPD_LBP_WS16));
|
|
dadeleteflag(softc, DA_DELETE_WS10,
|
|
(lbp->flags & SVPD_LBP_WS10));
|
|
dadeleteflag(softc, DA_DELETE_UNMAP,
|
|
(lbp->flags & SVPD_LBP_UNMAP));
|
|
} else {
|
|
int error;
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
|
|
/*
|
|
* Failure indicates we don't support any SBC-3
|
|
* delete methods with UNMAP
|
|
*/
|
|
}
|
|
}
|
|
|
|
free(lbp, M_SCSIDA);
|
|
softc->state = DA_STATE_PROBE_BLK_LIMITS;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probeblklimits(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct scsi_vpd_block_limits *block_limits;
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeblklimits\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
block_limits = (struct scsi_vpd_block_limits *)csio->data_ptr;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
uint32_t max_txfer_len = scsi_4btoul(
|
|
block_limits->max_txfer_len);
|
|
uint32_t max_unmap_lba_cnt = scsi_4btoul(
|
|
block_limits->max_unmap_lba_cnt);
|
|
uint32_t max_unmap_blk_cnt = scsi_4btoul(
|
|
block_limits->max_unmap_blk_cnt);
|
|
uint32_t unmap_gran = scsi_4btoul(
|
|
block_limits->opt_unmap_grain);
|
|
uint32_t unmap_gran_align = scsi_4btoul(
|
|
block_limits->unmap_grain_align);
|
|
uint64_t ws_max_blks = scsi_8btou64(
|
|
block_limits->max_write_same_length);
|
|
|
|
if (max_txfer_len != 0) {
|
|
softc->disk->d_maxsize = MIN(softc->maxio,
|
|
(off_t)max_txfer_len * softc->params.secsize);
|
|
}
|
|
|
|
/*
|
|
* We should already support UNMAP but we check lba
|
|
* and block count to be sure
|
|
*/
|
|
if (max_unmap_lba_cnt != 0x00L &&
|
|
max_unmap_blk_cnt != 0x00L) {
|
|
softc->unmap_max_lba = max_unmap_lba_cnt;
|
|
softc->unmap_max_ranges = min(max_unmap_blk_cnt,
|
|
UNMAP_MAX_RANGES);
|
|
if (unmap_gran > 1) {
|
|
softc->unmap_gran = unmap_gran;
|
|
if (unmap_gran_align & 0x80000000) {
|
|
softc->unmap_gran_align =
|
|
unmap_gran_align & 0x7fffffff;
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
* Unexpected UNMAP limits which means the
|
|
* device doesn't actually support UNMAP
|
|
*/
|
|
dadeleteflag(softc, DA_DELETE_UNMAP, 0);
|
|
}
|
|
|
|
if (ws_max_blks != 0x00L)
|
|
softc->ws_max_blks = ws_max_blks;
|
|
} else {
|
|
int error;
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
|
|
/*
|
|
* Failure here doesn't mean UNMAP is not
|
|
* supported as this is an optional page.
|
|
*/
|
|
softc->unmap_max_lba = 1;
|
|
softc->unmap_max_ranges = 1;
|
|
}
|
|
}
|
|
|
|
free(block_limits, M_SCSIDA);
|
|
softc->state = DA_STATE_PROBE_BDC;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probebdc(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct scsi_vpd_block_device_characteristics *bdc;
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probebdc\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
bdc = (struct scsi_vpd_block_device_characteristics *)csio->data_ptr;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
uint32_t valid_len;
|
|
|
|
/*
|
|
* Disable queue sorting for non-rotational media
|
|
* by default.
|
|
*/
|
|
u_int16_t old_rate = softc->disk->d_rotation_rate;
|
|
|
|
valid_len = csio->dxfer_len - csio->resid;
|
|
if (SBDC_IS_PRESENT(bdc, valid_len,
|
|
medium_rotation_rate)) {
|
|
softc->disk->d_rotation_rate =
|
|
scsi_2btoul(bdc->medium_rotation_rate);
|
|
if (softc->disk->d_rotation_rate ==
|
|
SVPD_BDC_RATE_NON_ROTATING) {
|
|
cam_iosched_set_sort_queue(
|
|
softc->cam_iosched, 0);
|
|
softc->rotating = 0;
|
|
}
|
|
if (softc->disk->d_rotation_rate != old_rate) {
|
|
disk_attr_changed(softc->disk,
|
|
"GEOM::rotation_rate", M_NOWAIT);
|
|
}
|
|
}
|
|
if ((SBDC_IS_PRESENT(bdc, valid_len, flags))
|
|
&& (softc->zone_mode == DA_ZONE_NONE)) {
|
|
int ata_proto;
|
|
|
|
if (scsi_vpd_supported_page(periph,
|
|
SVPD_ATA_INFORMATION))
|
|
ata_proto = 1;
|
|
else
|
|
ata_proto = 0;
|
|
|
|
/*
|
|
* The Zoned field will only be set for
|
|
* Drive Managed and Host Aware drives. If
|
|
* they are Host Managed, the device type
|
|
* in the standard INQUIRY data should be
|
|
* set to T_ZBC_HM (0x14).
|
|
*/
|
|
if ((bdc->flags & SVPD_ZBC_MASK) ==
|
|
SVPD_HAW_ZBC) {
|
|
softc->zone_mode = DA_ZONE_HOST_AWARE;
|
|
softc->zone_interface = (ata_proto) ?
|
|
DA_ZONE_IF_ATA_SAT : DA_ZONE_IF_SCSI;
|
|
} else if ((bdc->flags & SVPD_ZBC_MASK) ==
|
|
SVPD_DM_ZBC) {
|
|
softc->zone_mode =DA_ZONE_DRIVE_MANAGED;
|
|
softc->zone_interface = (ata_proto) ?
|
|
DA_ZONE_IF_ATA_SAT : DA_ZONE_IF_SCSI;
|
|
} else if ((bdc->flags & SVPD_ZBC_MASK) !=
|
|
SVPD_ZBC_NR) {
|
|
xpt_print(periph->path, "Unknown zoned "
|
|
"type %#x",
|
|
bdc->flags & SVPD_ZBC_MASK);
|
|
}
|
|
}
|
|
} else {
|
|
int error;
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
}
|
|
|
|
free(bdc, M_SCSIDA);
|
|
softc->state = DA_STATE_PROBE_ATA;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probeata(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct ata_params *ata_params;
|
|
struct ccb_scsiio *csio;
|
|
struct da_softc *softc;
|
|
u_int32_t priority;
|
|
int continue_probe;
|
|
int error;
|
|
int16_t *ptr;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeata\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
ata_params = (struct ata_params *)csio->data_ptr;
|
|
ptr = (uint16_t *)ata_params;
|
|
continue_probe = 0;
|
|
error = 0;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
uint16_t old_rate;
|
|
|
|
ata_param_fixup(ata_params);
|
|
if (ata_params->support_dsm & ATA_SUPPORT_DSM_TRIM &&
|
|
(softc->quirks & DA_Q_NO_UNMAP) == 0) {
|
|
dadeleteflag(softc, DA_DELETE_ATA_TRIM, 1);
|
|
if (ata_params->max_dsm_blocks != 0)
|
|
softc->trim_max_ranges = min(
|
|
softc->trim_max_ranges,
|
|
ata_params->max_dsm_blocks *
|
|
ATA_DSM_BLK_RANGES);
|
|
}
|
|
/*
|
|
* Disable queue sorting for non-rotational media
|
|
* by default.
|
|
*/
|
|
old_rate = softc->disk->d_rotation_rate;
|
|
softc->disk->d_rotation_rate = ata_params->media_rotation_rate;
|
|
if (softc->disk->d_rotation_rate == ATA_RATE_NON_ROTATING) {
|
|
cam_iosched_set_sort_queue(softc->cam_iosched, 0);
|
|
softc->rotating = 0;
|
|
}
|
|
if (softc->disk->d_rotation_rate != old_rate) {
|
|
disk_attr_changed(softc->disk,
|
|
"GEOM::rotation_rate", M_NOWAIT);
|
|
}
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
if (ata_params->capabilities1 & ATA_SUPPORT_DMA)
|
|
softc->flags |= DA_FLAG_CAN_ATA_DMA;
|
|
|
|
if (ata_params->support.extension & ATA_SUPPORT_GENLOG)
|
|
softc->flags |= DA_FLAG_CAN_ATA_LOG;
|
|
|
|
/*
|
|
* At this point, if we have a SATA host aware drive,
|
|
* we communicate via ATA passthrough unless the
|
|
* SAT layer supports ZBC -> ZAC translation. In
|
|
* that case,
|
|
*
|
|
* XXX KDM figure out how to detect a host managed
|
|
* SATA drive.
|
|
*/
|
|
if (softc->zone_mode == DA_ZONE_NONE) {
|
|
/*
|
|
* Note that we don't override the zone
|
|
* mode or interface if it has already been
|
|
* set. This is because it has either been
|
|
* set as a quirk, or when we probed the
|
|
* SCSI Block Device Characteristics page,
|
|
* the zoned field was set. The latter
|
|
* means that the SAT layer supports ZBC to
|
|
* ZAC translation, and we would prefer to
|
|
* use that if it is available.
|
|
*/
|
|
if ((ata_params->support3 &
|
|
ATA_SUPPORT_ZONE_MASK) ==
|
|
ATA_SUPPORT_ZONE_HOST_AWARE) {
|
|
softc->zone_mode = DA_ZONE_HOST_AWARE;
|
|
softc->zone_interface =
|
|
DA_ZONE_IF_ATA_PASS;
|
|
} else if ((ata_params->support3 &
|
|
ATA_SUPPORT_ZONE_MASK) ==
|
|
ATA_SUPPORT_ZONE_DEV_MANAGED) {
|
|
softc->zone_mode =DA_ZONE_DRIVE_MANAGED;
|
|
softc->zone_interface = DA_ZONE_IF_ATA_PASS;
|
|
}
|
|
}
|
|
|
|
} else {
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((softc->zone_mode == DA_ZONE_HOST_AWARE)
|
|
|| (softc->zone_mode == DA_ZONE_HOST_MANAGED)) {
|
|
/*
|
|
* If the ATA IDENTIFY failed, we could be talking
|
|
* to a SCSI drive, although that seems unlikely,
|
|
* since the drive did report that it supported the
|
|
* ATA Information VPD page. If the ATA IDENTIFY
|
|
* succeeded, and the SAT layer doesn't support
|
|
* ZBC -> ZAC translation, continue on to get the
|
|
* directory of ATA logs, and complete the rest of
|
|
* the ZAC probe. If the SAT layer does support
|
|
* ZBC -> ZAC translation, we want to use that,
|
|
* and we'll probe the SCSI Zoned Block Device
|
|
* Characteristics VPD page next.
|
|
*/
|
|
if ((error == 0)
|
|
&& (softc->flags & DA_FLAG_CAN_ATA_LOG)
|
|
&& (softc->zone_interface == DA_ZONE_IF_ATA_PASS))
|
|
softc->state = DA_STATE_PROBE_ATA_LOGDIR;
|
|
else
|
|
softc->state = DA_STATE_PROBE_ZONE;
|
|
continue_probe = 1;
|
|
}
|
|
if (continue_probe != 0) {
|
|
xpt_schedule(periph, priority);
|
|
xpt_release_ccb(done_ccb);
|
|
return;
|
|
} else
|
|
daprobedone(periph, done_ccb);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probeatalogdir(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
int error;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeatalogdir\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
error = 0;
|
|
softc->valid_logdir_len = 0;
|
|
bzero(&softc->ata_logdir, sizeof(softc->ata_logdir));
|
|
softc->valid_logdir_len = csio->dxfer_len - csio->resid;
|
|
if (softc->valid_logdir_len > 0)
|
|
bcopy(csio->data_ptr, &softc->ata_logdir,
|
|
min(softc->valid_logdir_len,
|
|
sizeof(softc->ata_logdir)));
|
|
/*
|
|
* Figure out whether the Identify Device log is
|
|
* supported. The General Purpose log directory
|
|
* has a header, and lists the number of pages
|
|
* available for each GP log identified by the
|
|
* offset into the list.
|
|
*/
|
|
if ((softc->valid_logdir_len >=
|
|
((ATA_IDENTIFY_DATA_LOG + 1) * sizeof(uint16_t)))
|
|
&& (le16dec(softc->ata_logdir.header) ==
|
|
ATA_GP_LOG_DIR_VERSION)
|
|
&& (le16dec(&softc->ata_logdir.num_pages[
|
|
(ATA_IDENTIFY_DATA_LOG *
|
|
sizeof(uint16_t)) - sizeof(uint16_t)]) > 0)){
|
|
softc->flags |= DA_FLAG_CAN_ATA_IDLOG;
|
|
} else {
|
|
softc->flags &= ~DA_FLAG_CAN_ATA_IDLOG;
|
|
}
|
|
} else {
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
/*
|
|
* If we can't get the ATA log directory,
|
|
* then ATA logs are effectively not
|
|
* supported even if the bit is set in the
|
|
* identify data.
|
|
*/
|
|
softc->flags &= ~(DA_FLAG_CAN_ATA_LOG |
|
|
DA_FLAG_CAN_ATA_IDLOG);
|
|
if ((done_ccb->ccb_h.status &
|
|
CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
}
|
|
|
|
free(csio->data_ptr, M_SCSIDA);
|
|
|
|
if ((error == 0)
|
|
&& (softc->flags & DA_FLAG_CAN_ATA_IDLOG)) {
|
|
softc->state = DA_STATE_PROBE_ATA_IDDIR;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
daprobedone(periph, done_ccb);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probeataiddir(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
int error;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeataiddir\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
off_t entries_offset, max_entries;
|
|
error = 0;
|
|
|
|
softc->valid_iddir_len = 0;
|
|
bzero(&softc->ata_iddir, sizeof(softc->ata_iddir));
|
|
softc->flags &= ~(DA_FLAG_CAN_ATA_SUPCAP |
|
|
DA_FLAG_CAN_ATA_ZONE);
|
|
softc->valid_iddir_len = csio->dxfer_len - csio->resid;
|
|
if (softc->valid_iddir_len > 0)
|
|
bcopy(csio->data_ptr, &softc->ata_iddir,
|
|
min(softc->valid_iddir_len,
|
|
sizeof(softc->ata_iddir)));
|
|
|
|
entries_offset =
|
|
__offsetof(struct ata_identify_log_pages,entries);
|
|
max_entries = softc->valid_iddir_len - entries_offset;
|
|
if ((softc->valid_iddir_len > (entries_offset + 1))
|
|
&& (le64dec(softc->ata_iddir.header) == ATA_IDLOG_REVISION)
|
|
&& (softc->ata_iddir.entry_count > 0)) {
|
|
int num_entries, i;
|
|
|
|
num_entries = softc->ata_iddir.entry_count;
|
|
num_entries = min(num_entries,
|
|
softc->valid_iddir_len - entries_offset);
|
|
for (i = 0; i < num_entries && i < max_entries; i++) {
|
|
if (softc->ata_iddir.entries[i] ==
|
|
ATA_IDL_SUP_CAP)
|
|
softc->flags |= DA_FLAG_CAN_ATA_SUPCAP;
|
|
else if (softc->ata_iddir.entries[i] ==
|
|
ATA_IDL_ZDI)
|
|
softc->flags |= DA_FLAG_CAN_ATA_ZONE;
|
|
|
|
if ((softc->flags & DA_FLAG_CAN_ATA_SUPCAP)
|
|
&& (softc->flags & DA_FLAG_CAN_ATA_ZONE))
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
/*
|
|
* If we can't get the ATA Identify Data log
|
|
* directory, then it effectively isn't
|
|
* supported even if the ATA Log directory
|
|
* a non-zero number of pages present for
|
|
* this log.
|
|
*/
|
|
softc->flags &= ~DA_FLAG_CAN_ATA_IDLOG;
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
}
|
|
|
|
free(csio->data_ptr, M_SCSIDA);
|
|
|
|
if ((error == 0) && (softc->flags & DA_FLAG_CAN_ATA_SUPCAP)) {
|
|
softc->state = DA_STATE_PROBE_ATA_SUP;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
daprobedone(periph, done_ccb);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probeatasup(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
u_int32_t priority;
|
|
int error;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeatasup\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
csio = &done_ccb->csio;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
uint32_t valid_len;
|
|
size_t needed_size;
|
|
struct ata_identify_log_sup_cap *sup_cap;
|
|
error = 0;
|
|
|
|
sup_cap = (struct ata_identify_log_sup_cap *)csio->data_ptr;
|
|
valid_len = csio->dxfer_len - csio->resid;
|
|
needed_size = __offsetof(struct ata_identify_log_sup_cap,
|
|
sup_zac_cap) + 1 + sizeof(sup_cap->sup_zac_cap);
|
|
if (valid_len >= needed_size) {
|
|
uint64_t zoned, zac_cap;
|
|
|
|
zoned = le64dec(sup_cap->zoned_cap);
|
|
if (zoned & ATA_ZONED_VALID) {
|
|
/*
|
|
* This should have already been
|
|
* set, because this is also in the
|
|
* ATA identify data.
|
|
*/
|
|
if ((zoned & ATA_ZONED_MASK) ==
|
|
ATA_SUPPORT_ZONE_HOST_AWARE)
|
|
softc->zone_mode = DA_ZONE_HOST_AWARE;
|
|
else if ((zoned & ATA_ZONED_MASK) ==
|
|
ATA_SUPPORT_ZONE_DEV_MANAGED)
|
|
softc->zone_mode =
|
|
DA_ZONE_DRIVE_MANAGED;
|
|
}
|
|
|
|
zac_cap = le64dec(sup_cap->sup_zac_cap);
|
|
if (zac_cap & ATA_SUP_ZAC_CAP_VALID) {
|
|
if (zac_cap & ATA_REPORT_ZONES_SUP)
|
|
softc->zone_flags |=
|
|
DA_ZONE_FLAG_RZ_SUP;
|
|
if (zac_cap & ATA_ND_OPEN_ZONE_SUP)
|
|
softc->zone_flags |=
|
|
DA_ZONE_FLAG_OPEN_SUP;
|
|
if (zac_cap & ATA_ND_CLOSE_ZONE_SUP)
|
|
softc->zone_flags |=
|
|
DA_ZONE_FLAG_CLOSE_SUP;
|
|
if (zac_cap & ATA_ND_FINISH_ZONE_SUP)
|
|
softc->zone_flags |=
|
|
DA_ZONE_FLAG_FINISH_SUP;
|
|
if (zac_cap & ATA_ND_RWP_SUP)
|
|
softc->zone_flags |=
|
|
DA_ZONE_FLAG_RWP_SUP;
|
|
} else {
|
|
/*
|
|
* This field was introduced in
|
|
* ACS-4, r08 on April 28th, 2015.
|
|
* If the drive firmware was written
|
|
* to an earlier spec, it won't have
|
|
* the field. So, assume all
|
|
* commands are supported.
|
|
*/
|
|
softc->zone_flags |= DA_ZONE_FLAG_SUP_MASK;
|
|
}
|
|
}
|
|
} else {
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
/*
|
|
* If we can't get the ATA Identify Data
|
|
* Supported Capabilities page, clear the
|
|
* flag...
|
|
*/
|
|
softc->flags &= ~DA_FLAG_CAN_ATA_SUPCAP;
|
|
/*
|
|
* And clear zone capabilities.
|
|
*/
|
|
softc->zone_flags &= ~DA_ZONE_FLAG_SUP_MASK;
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
}
|
|
|
|
free(csio->data_ptr, M_SCSIDA);
|
|
|
|
if ((error == 0) && (softc->flags & DA_FLAG_CAN_ATA_ZONE)) {
|
|
softc->state = DA_STATE_PROBE_ATA_ZONE;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
daprobedone(periph, done_ccb);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probeatazone(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
int error;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeatazone\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
csio = &done_ccb->csio;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
struct ata_zoned_info_log *zi_log;
|
|
uint32_t valid_len;
|
|
size_t needed_size;
|
|
|
|
zi_log = (struct ata_zoned_info_log *)csio->data_ptr;
|
|
|
|
valid_len = csio->dxfer_len - csio->resid;
|
|
needed_size = __offsetof(struct ata_zoned_info_log,
|
|
version_info) + 1 + sizeof(zi_log->version_info);
|
|
if (valid_len >= needed_size) {
|
|
uint64_t tmpvar;
|
|
|
|
tmpvar = le64dec(zi_log->zoned_cap);
|
|
if (tmpvar & ATA_ZDI_CAP_VALID) {
|
|
if (tmpvar & ATA_ZDI_CAP_URSWRZ)
|
|
softc->zone_flags |=
|
|
DA_ZONE_FLAG_URSWRZ;
|
|
else
|
|
softc->zone_flags &=
|
|
~DA_ZONE_FLAG_URSWRZ;
|
|
}
|
|
tmpvar = le64dec(zi_log->optimal_seq_zones);
|
|
if (tmpvar & ATA_ZDI_OPT_SEQ_VALID) {
|
|
softc->zone_flags |= DA_ZONE_FLAG_OPT_SEQ_SET;
|
|
softc->optimal_seq_zones = (tmpvar &
|
|
ATA_ZDI_OPT_SEQ_MASK);
|
|
} else {
|
|
softc->zone_flags &= ~DA_ZONE_FLAG_OPT_SEQ_SET;
|
|
softc->optimal_seq_zones = 0;
|
|
}
|
|
|
|
tmpvar =le64dec(zi_log->optimal_nonseq_zones);
|
|
if (tmpvar & ATA_ZDI_OPT_NS_VALID) {
|
|
softc->zone_flags |=
|
|
DA_ZONE_FLAG_OPT_NONSEQ_SET;
|
|
softc->optimal_nonseq_zones =
|
|
(tmpvar & ATA_ZDI_OPT_NS_MASK);
|
|
} else {
|
|
softc->zone_flags &=
|
|
~DA_ZONE_FLAG_OPT_NONSEQ_SET;
|
|
softc->optimal_nonseq_zones = 0;
|
|
}
|
|
|
|
tmpvar = le64dec(zi_log->max_seq_req_zones);
|
|
if (tmpvar & ATA_ZDI_MAX_SEQ_VALID) {
|
|
softc->zone_flags |= DA_ZONE_FLAG_MAX_SEQ_SET;
|
|
softc->max_seq_zones =
|
|
(tmpvar & ATA_ZDI_MAX_SEQ_MASK);
|
|
} else {
|
|
softc->zone_flags &= ~DA_ZONE_FLAG_MAX_SEQ_SET;
|
|
softc->max_seq_zones = 0;
|
|
}
|
|
}
|
|
} else {
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
softc->flags &= ~DA_FLAG_CAN_ATA_ZONE;
|
|
softc->flags &= ~DA_ZONE_FLAG_SET_MASK;
|
|
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
free(csio->data_ptr, M_SCSIDA);
|
|
|
|
daprobedone(periph, done_ccb);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_probezone(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
int error;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probezone\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
csio = &done_ccb->csio;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
uint32_t valid_len;
|
|
size_t needed_len;
|
|
struct scsi_vpd_zoned_bdc *zoned_bdc;
|
|
|
|
error = 0;
|
|
zoned_bdc = (struct scsi_vpd_zoned_bdc *)csio->data_ptr;
|
|
valid_len = csio->dxfer_len - csio->resid;
|
|
needed_len = __offsetof(struct scsi_vpd_zoned_bdc,
|
|
max_seq_req_zones) + 1 +
|
|
sizeof(zoned_bdc->max_seq_req_zones);
|
|
if ((valid_len >= needed_len)
|
|
&& (scsi_2btoul(zoned_bdc->page_length) >= SVPD_ZBDC_PL)) {
|
|
if (zoned_bdc->flags & SVPD_ZBDC_URSWRZ)
|
|
softc->zone_flags |= DA_ZONE_FLAG_URSWRZ;
|
|
else
|
|
softc->zone_flags &= ~DA_ZONE_FLAG_URSWRZ;
|
|
softc->optimal_seq_zones =
|
|
scsi_4btoul(zoned_bdc->optimal_seq_zones);
|
|
softc->zone_flags |= DA_ZONE_FLAG_OPT_SEQ_SET;
|
|
softc->optimal_nonseq_zones = scsi_4btoul(
|
|
zoned_bdc->optimal_nonseq_zones);
|
|
softc->zone_flags |= DA_ZONE_FLAG_OPT_NONSEQ_SET;
|
|
softc->max_seq_zones =
|
|
scsi_4btoul(zoned_bdc->max_seq_req_zones);
|
|
softc->zone_flags |= DA_ZONE_FLAG_MAX_SEQ_SET;
|
|
}
|
|
/*
|
|
* All of the zone commands are mandatory for SCSI
|
|
* devices.
|
|
*
|
|
* XXX KDM this is valid as of September 2015.
|
|
* Re-check this assumption once the SAT spec is
|
|
* updated to support SCSI ZBC to ATA ZAC mapping.
|
|
* Since ATA allows zone commands to be reported
|
|
* as supported or not, this may not necessarily
|
|
* be true for an ATA device behind a SAT (SCSI to
|
|
* ATA Translation) layer.
|
|
*/
|
|
softc->zone_flags |= DA_ZONE_FLAG_SUP_MASK;
|
|
} else {
|
|
error = daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA|SF_NO_PRINT);
|
|
if (error == ERESTART)
|
|
return;
|
|
else if (error != 0) {
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
/* Don't wedge this device's queue */
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
}
|
|
}
|
|
|
|
free(csio->data_ptr, M_SCSIDA);
|
|
|
|
daprobedone(periph, done_ccb);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dadone_tur(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct da_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
|
|
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_tur\n"));
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
csio = &done_ccb->csio;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
|
|
|
|
if (daerror(done_ccb, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA | SF_NO_RECOVERY | SF_NO_PRINT) == ERESTART)
|
|
return; /* Will complete again, keep reference */
|
|
if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
softc->flags &= ~DA_FLAG_TUR_PENDING;
|
|
xpt_release_ccb(done_ccb);
|
|
da_periph_release_locked(periph, DA_REF_TUR);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dareprobe(struct cam_periph *periph)
|
|
{
|
|
struct da_softc *softc;
|
|
int status;
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
/* Probe in progress; don't interfere. */
|
|
if (softc->state != DA_STATE_NORMAL)
|
|
return;
|
|
|
|
status = da_periph_acquire(periph, DA_REF_REPROBE);
|
|
KASSERT(status == 0, ("dareprobe: cam_periph_acquire failed"));
|
|
|
|
softc->state = DA_STATE_PROBE_WP;
|
|
xpt_schedule(periph, CAM_PRIORITY_DEV);
|
|
}
|
|
|
|
static int
|
|
daerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
|
|
{
|
|
struct da_softc *softc;
|
|
struct cam_periph *periph;
|
|
int error, error_code, sense_key, asc, ascq;
|
|
|
|
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
|
|
if (ccb->csio.bio != NULL)
|
|
biotrack(ccb->csio.bio, __func__);
|
|
#endif
|
|
|
|
periph = xpt_path_periph(ccb->ccb_h.path);
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
|
|
/*
|
|
* Automatically detect devices that do not support
|
|
* READ(6)/WRITE(6) and upgrade to using 10 byte cdbs.
|
|
*/
|
|
error = 0;
|
|
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INVALID) {
|
|
error = cmd6workaround(ccb);
|
|
} else if (scsi_extract_sense_ccb(ccb,
|
|
&error_code, &sense_key, &asc, &ascq)) {
|
|
if (sense_key == SSD_KEY_ILLEGAL_REQUEST)
|
|
error = cmd6workaround(ccb);
|
|
/*
|
|
* If the target replied with CAPACITY DATA HAS CHANGED UA,
|
|
* query the capacity and notify upper layers.
|
|
*/
|
|
else if (sense_key == SSD_KEY_UNIT_ATTENTION &&
|
|
asc == 0x2A && ascq == 0x09) {
|
|
xpt_print(periph->path, "Capacity data has changed\n");
|
|
softc->flags &= ~DA_FLAG_PROBED;
|
|
dareprobe(periph);
|
|
sense_flags |= SF_NO_PRINT;
|
|
} else if (sense_key == SSD_KEY_UNIT_ATTENTION &&
|
|
asc == 0x28 && ascq == 0x00) {
|
|
softc->flags &= ~DA_FLAG_PROBED;
|
|
disk_media_changed(softc->disk, M_NOWAIT);
|
|
} else if (sense_key == SSD_KEY_UNIT_ATTENTION &&
|
|
asc == 0x3F && ascq == 0x03) {
|
|
xpt_print(periph->path, "INQUIRY data has changed\n");
|
|
softc->flags &= ~DA_FLAG_PROBED;
|
|
dareprobe(periph);
|
|
sense_flags |= SF_NO_PRINT;
|
|
} else if (sense_key == SSD_KEY_NOT_READY &&
|
|
asc == 0x3a && (softc->flags & DA_FLAG_PACK_INVALID) == 0) {
|
|
softc->flags |= DA_FLAG_PACK_INVALID;
|
|
disk_media_gone(softc->disk, M_NOWAIT);
|
|
}
|
|
}
|
|
if (error == ERESTART)
|
|
return (ERESTART);
|
|
|
|
#ifdef CAM_IO_STATS
|
|
switch (ccb->ccb_h.status & CAM_STATUS_MASK) {
|
|
case CAM_CMD_TIMEOUT:
|
|
softc->timeouts++;
|
|
break;
|
|
case CAM_REQ_ABORTED:
|
|
case CAM_REQ_CMP_ERR:
|
|
case CAM_REQ_TERMIO:
|
|
case CAM_UNREC_HBA_ERROR:
|
|
case CAM_DATA_RUN_ERR:
|
|
softc->errors++;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* XXX
|
|
* Until we have a better way of doing pack validation,
|
|
* don't treat UAs as errors.
|
|
*/
|
|
sense_flags |= SF_RETRY_UA;
|
|
|
|
if (softc->quirks & DA_Q_RETRY_BUSY)
|
|
sense_flags |= SF_RETRY_BUSY;
|
|
return(cam_periph_error(ccb, cam_flags, sense_flags));
|
|
}
|
|
|
|
static void
|
|
damediapoll(void *arg)
|
|
{
|
|
struct cam_periph *periph = arg;
|
|
struct da_softc *softc = periph->softc;
|
|
|
|
if (!cam_iosched_has_work_flags(softc->cam_iosched, DA_WORK_TUR) &&
|
|
(softc->flags & DA_FLAG_TUR_PENDING) == 0 &&
|
|
softc->state == DA_STATE_NORMAL &&
|
|
LIST_EMPTY(&softc->pending_ccbs)) {
|
|
if (da_periph_acquire(periph, DA_REF_TUR) == 0) {
|
|
cam_iosched_set_work_flags(softc->cam_iosched, DA_WORK_TUR);
|
|
daschedule(periph);
|
|
}
|
|
}
|
|
/* Queue us up again */
|
|
if (da_poll_period != 0)
|
|
callout_schedule(&softc->mediapoll_c, da_poll_period * hz);
|
|
}
|
|
|
|
static void
|
|
daprevent(struct cam_periph *periph, int action)
|
|
{
|
|
struct da_softc *softc;
|
|
union ccb *ccb;
|
|
int error;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
if (((action == PR_ALLOW)
|
|
&& (softc->flags & DA_FLAG_PACK_LOCKED) == 0)
|
|
|| ((action == PR_PREVENT)
|
|
&& (softc->flags & DA_FLAG_PACK_LOCKED) != 0)) {
|
|
return;
|
|
}
|
|
|
|
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
|
|
|
|
scsi_prevent(&ccb->csio,
|
|
/*retries*/1,
|
|
/*cbcfp*/NULL,
|
|
MSG_SIMPLE_Q_TAG,
|
|
action,
|
|
SSD_FULL_SIZE,
|
|
5000);
|
|
|
|
error = cam_periph_runccb(ccb, daerror, CAM_RETRY_SELTO,
|
|
SF_RETRY_UA | SF_NO_PRINT, softc->disk->d_devstat);
|
|
|
|
if (error == 0) {
|
|
if (action == PR_ALLOW)
|
|
softc->flags &= ~DA_FLAG_PACK_LOCKED;
|
|
else
|
|
softc->flags |= DA_FLAG_PACK_LOCKED;
|
|
}
|
|
|
|
xpt_release_ccb(ccb);
|
|
}
|
|
|
|
static void
|
|
dasetgeom(struct cam_periph *periph, uint32_t block_len, uint64_t maxsector,
|
|
struct scsi_read_capacity_data_long *rcaplong, size_t rcap_len)
|
|
{
|
|
struct ccb_calc_geometry ccg;
|
|
struct da_softc *softc;
|
|
struct disk_params *dp;
|
|
u_int lbppbe, lalba;
|
|
int error;
|
|
|
|
softc = (struct da_softc *)periph->softc;
|
|
|
|
dp = &softc->params;
|
|
dp->secsize = block_len;
|
|
dp->sectors = maxsector + 1;
|
|
if (rcaplong != NULL) {
|
|
lbppbe = rcaplong->prot_lbppbe & SRC16_LBPPBE;
|
|
lalba = scsi_2btoul(rcaplong->lalba_lbp);
|
|
lalba &= SRC16_LALBA_A;
|
|
if (rcaplong->prot & SRC16_PROT_EN)
|
|
softc->p_type = ((rcaplong->prot & SRC16_P_TYPE) >>
|
|
SRC16_P_TYPE_SHIFT) + 1;
|
|
else
|
|
softc->p_type = 0;
|
|
} else {
|
|
lbppbe = 0;
|
|
lalba = 0;
|
|
softc->p_type = 0;
|
|
}
|
|
|
|
if (lbppbe > 0) {
|
|
dp->stripesize = block_len << lbppbe;
|
|
dp->stripeoffset = (dp->stripesize - block_len * lalba) %
|
|
dp->stripesize;
|
|
} else if (softc->quirks & DA_Q_4K) {
|
|
dp->stripesize = 4096;
|
|
dp->stripeoffset = 0;
|
|
} else if (softc->unmap_gran != 0) {
|
|
dp->stripesize = block_len * softc->unmap_gran;
|
|
dp->stripeoffset = (dp->stripesize - block_len *
|
|
softc->unmap_gran_align) % dp->stripesize;
|
|
} else {
|
|
dp->stripesize = 0;
|
|
dp->stripeoffset = 0;
|
|
}
|
|
/*
|
|
* Have the controller provide us with a geometry
|
|
* for this disk. The only time the geometry
|
|
* matters is when we boot and the controller
|
|
* is the only one knowledgeable enough to come
|
|
* up with something that will make this a bootable
|
|
* device.
|
|
*/
|
|
xpt_setup_ccb(&ccg.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
|
|
ccg.ccb_h.func_code = XPT_CALC_GEOMETRY;
|
|
ccg.block_size = dp->secsize;
|
|
ccg.volume_size = dp->sectors;
|
|
ccg.heads = 0;
|
|
ccg.secs_per_track = 0;
|
|
ccg.cylinders = 0;
|
|
xpt_action((union ccb*)&ccg);
|
|
if ((ccg.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
|
|
/*
|
|
* We don't know what went wrong here- but just pick
|
|
* a geometry so we don't have nasty things like divide
|
|
* by zero.
|
|
*/
|
|
dp->heads = 255;
|
|
dp->secs_per_track = 255;
|
|
dp->cylinders = dp->sectors / (255 * 255);
|
|
if (dp->cylinders == 0) {
|
|
dp->cylinders = 1;
|
|
}
|
|
} else {
|
|
dp->heads = ccg.heads;
|
|
dp->secs_per_track = ccg.secs_per_track;
|
|
dp->cylinders = ccg.cylinders;
|
|
}
|
|
|
|
/*
|
|
* If the user supplied a read capacity buffer, and if it is
|
|
* different than the previous buffer, update the data in the EDT.
|
|
* If it's the same, we don't bother. This avoids sending an
|
|
* update every time someone opens this device.
|
|
*/
|
|
if ((rcaplong != NULL)
|
|
&& (bcmp(rcaplong, &softc->rcaplong,
|
|
min(sizeof(softc->rcaplong), rcap_len)) != 0)) {
|
|
struct ccb_dev_advinfo cdai;
|
|
|
|
xpt_setup_ccb(&cdai.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
|
|
cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
|
|
cdai.buftype = CDAI_TYPE_RCAPLONG;
|
|
cdai.flags = CDAI_FLAG_STORE;
|
|
cdai.bufsiz = rcap_len;
|
|
cdai.buf = (uint8_t *)rcaplong;
|
|
xpt_action((union ccb *)&cdai);
|
|
if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
|
|
cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
|
|
if (cdai.ccb_h.status != CAM_REQ_CMP) {
|
|
xpt_print(periph->path, "%s: failed to set read "
|
|
"capacity advinfo\n", __func__);
|
|
/* Use cam_error_print() to decode the status */
|
|
cam_error_print((union ccb *)&cdai, CAM_ESF_CAM_STATUS,
|
|
CAM_EPF_ALL);
|
|
} else {
|
|
bcopy(rcaplong, &softc->rcaplong,
|
|
min(sizeof(softc->rcaplong), rcap_len));
|
|
}
|
|
}
|
|
|
|
softc->disk->d_sectorsize = softc->params.secsize;
|
|
softc->disk->d_mediasize = softc->params.secsize * (off_t)softc->params.sectors;
|
|
softc->disk->d_stripesize = softc->params.stripesize;
|
|
softc->disk->d_stripeoffset = softc->params.stripeoffset;
|
|
/* XXX: these are not actually "firmware" values, so they may be wrong */
|
|
softc->disk->d_fwsectors = softc->params.secs_per_track;
|
|
softc->disk->d_fwheads = softc->params.heads;
|
|
softc->disk->d_devstat->block_size = softc->params.secsize;
|
|
softc->disk->d_devstat->flags &= ~DEVSTAT_BS_UNAVAILABLE;
|
|
|
|
error = disk_resize(softc->disk, M_NOWAIT);
|
|
if (error != 0)
|
|
xpt_print(periph->path, "disk_resize(9) failed, error = %d\n", error);
|
|
}
|
|
|
|
static void
|
|
dasendorderedtag(void *arg)
|
|
{
|
|
struct cam_periph *periph = arg;
|
|
struct da_softc *softc = periph->softc;
|
|
|
|
cam_periph_assert(periph, MA_OWNED);
|
|
if (da_send_ordered) {
|
|
if (!LIST_EMPTY(&softc->pending_ccbs)) {
|
|
if ((softc->flags & DA_FLAG_WAS_OTAG) == 0)
|
|
softc->flags |= DA_FLAG_NEED_OTAG;
|
|
softc->flags &= ~DA_FLAG_WAS_OTAG;
|
|
}
|
|
}
|
|
|
|
/* Queue us up again */
|
|
callout_reset(&softc->sendordered_c,
|
|
(da_default_timeout * hz) / DA_ORDEREDTAG_INTERVAL,
|
|
dasendorderedtag, periph);
|
|
}
|
|
|
|
/*
|
|
* Step through all DA peripheral drivers, and if the device is still open,
|
|
* sync the disk cache to physical media.
|
|
*/
|
|
static void
|
|
dashutdown(void * arg, int howto)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct da_softc *softc;
|
|
union ccb *ccb;
|
|
int error;
|
|
|
|
CAM_PERIPH_FOREACH(periph, &dadriver) {
|
|
softc = (struct da_softc *)periph->softc;
|
|
if (SCHEDULER_STOPPED()) {
|
|
/* If we paniced with the lock held, do not recurse. */
|
|
if (!cam_periph_owned(periph) &&
|
|
(softc->flags & DA_FLAG_OPEN)) {
|
|
dadump(softc->disk, NULL, 0, 0, 0);
|
|
}
|
|
continue;
|
|
}
|
|
cam_periph_lock(periph);
|
|
|
|
/*
|
|
* We only sync the cache if the drive is still open, and
|
|
* if the drive is capable of it..
|
|
*/
|
|
if (((softc->flags & DA_FLAG_OPEN) == 0)
|
|
|| (softc->quirks & DA_Q_NO_SYNC_CACHE)) {
|
|
cam_periph_unlock(periph);
|
|
continue;
|
|
}
|
|
|
|
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
|
|
scsi_synchronize_cache(&ccb->csio,
|
|
/*retries*/0,
|
|
/*cbfcnp*/NULL,
|
|
MSG_SIMPLE_Q_TAG,
|
|
/*begin_lba*/0, /* whole disk */
|
|
/*lb_count*/0,
|
|
SSD_FULL_SIZE,
|
|
60 * 60 * 1000);
|
|
|
|
error = cam_periph_runccb(ccb, daerror, /*cam_flags*/0,
|
|
/*sense_flags*/ SF_NO_RECOVERY | SF_NO_RETRY | SF_QUIET_IR,
|
|
softc->disk->d_devstat);
|
|
if (error != 0)
|
|
xpt_print(periph->path, "Synchronize cache failed\n");
|
|
xpt_release_ccb(ccb);
|
|
cam_periph_unlock(periph);
|
|
}
|
|
}
|
|
|
|
#else /* !_KERNEL */
|
|
|
|
/*
|
|
* XXX These are only left out of the kernel build to silence warnings. If,
|
|
* for some reason these functions are used in the kernel, the ifdefs should
|
|
* be moved so they are included both in the kernel and userland.
|
|
*/
|
|
void
|
|
scsi_format_unit(struct ccb_scsiio *csio, u_int32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
u_int8_t tag_action, u_int8_t byte2, u_int16_t ileave,
|
|
u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len,
|
|
u_int32_t timeout)
|
|
{
|
|
struct scsi_format_unit *scsi_cmd;
|
|
|
|
scsi_cmd = (struct scsi_format_unit *)&csio->cdb_io.cdb_bytes;
|
|
scsi_cmd->opcode = FORMAT_UNIT;
|
|
scsi_cmd->byte2 = byte2;
|
|
scsi_ulto2b(ileave, scsi_cmd->interleave);
|
|
|
|
cam_fill_csio(csio,
|
|
retries,
|
|
cbfcnp,
|
|
/*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE,
|
|
tag_action,
|
|
data_ptr,
|
|
dxfer_len,
|
|
sense_len,
|
|
sizeof(*scsi_cmd),
|
|
timeout);
|
|
}
|
|
|
|
void
|
|
scsi_read_defects(struct ccb_scsiio *csio, uint32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
uint8_t tag_action, uint8_t list_format,
|
|
uint32_t addr_desc_index, uint8_t *data_ptr,
|
|
uint32_t dxfer_len, int minimum_cmd_size,
|
|
uint8_t sense_len, uint32_t timeout)
|
|
{
|
|
uint8_t cdb_len;
|
|
|
|
/*
|
|
* These conditions allow using the 10 byte command. Otherwise we
|
|
* need to use the 12 byte command.
|
|
*/
|
|
if ((minimum_cmd_size <= 10)
|
|
&& (addr_desc_index == 0)
|
|
&& (dxfer_len <= SRDD10_MAX_LENGTH)) {
|
|
struct scsi_read_defect_data_10 *cdb10;
|
|
|
|
cdb10 = (struct scsi_read_defect_data_10 *)
|
|
&csio->cdb_io.cdb_bytes;
|
|
|
|
cdb_len = sizeof(*cdb10);
|
|
bzero(cdb10, cdb_len);
|
|
cdb10->opcode = READ_DEFECT_DATA_10;
|
|
cdb10->format = list_format;
|
|
scsi_ulto2b(dxfer_len, cdb10->alloc_length);
|
|
} else {
|
|
struct scsi_read_defect_data_12 *cdb12;
|
|
|
|
cdb12 = (struct scsi_read_defect_data_12 *)
|
|
&csio->cdb_io.cdb_bytes;
|
|
|
|
cdb_len = sizeof(*cdb12);
|
|
bzero(cdb12, cdb_len);
|
|
cdb12->opcode = READ_DEFECT_DATA_12;
|
|
cdb12->format = list_format;
|
|
scsi_ulto4b(dxfer_len, cdb12->alloc_length);
|
|
scsi_ulto4b(addr_desc_index, cdb12->address_descriptor_index);
|
|
}
|
|
|
|
cam_fill_csio(csio,
|
|
retries,
|
|
cbfcnp,
|
|
/*flags*/ CAM_DIR_IN,
|
|
tag_action,
|
|
data_ptr,
|
|
dxfer_len,
|
|
sense_len,
|
|
cdb_len,
|
|
timeout);
|
|
}
|
|
|
|
void
|
|
scsi_sanitize(struct ccb_scsiio *csio, u_int32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
u_int8_t tag_action, u_int8_t byte2, u_int16_t control,
|
|
u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len,
|
|
u_int32_t timeout)
|
|
{
|
|
struct scsi_sanitize *scsi_cmd;
|
|
|
|
scsi_cmd = (struct scsi_sanitize *)&csio->cdb_io.cdb_bytes;
|
|
scsi_cmd->opcode = SANITIZE;
|
|
scsi_cmd->byte2 = byte2;
|
|
scsi_cmd->control = control;
|
|
scsi_ulto2b(dxfer_len, scsi_cmd->length);
|
|
|
|
cam_fill_csio(csio,
|
|
retries,
|
|
cbfcnp,
|
|
/*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE,
|
|
tag_action,
|
|
data_ptr,
|
|
dxfer_len,
|
|
sense_len,
|
|
sizeof(*scsi_cmd),
|
|
timeout);
|
|
}
|
|
|
|
#endif /* _KERNEL */
|
|
|
|
void
|
|
scsi_zbc_out(struct ccb_scsiio *csio, uint32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
uint8_t tag_action, uint8_t service_action, uint64_t zone_id,
|
|
uint8_t zone_flags, uint8_t *data_ptr, uint32_t dxfer_len,
|
|
uint8_t sense_len, uint32_t timeout)
|
|
{
|
|
struct scsi_zbc_out *scsi_cmd;
|
|
|
|
scsi_cmd = (struct scsi_zbc_out *)&csio->cdb_io.cdb_bytes;
|
|
scsi_cmd->opcode = ZBC_OUT;
|
|
scsi_cmd->service_action = service_action;
|
|
scsi_u64to8b(zone_id, scsi_cmd->zone_id);
|
|
scsi_cmd->zone_flags = zone_flags;
|
|
|
|
cam_fill_csio(csio,
|
|
retries,
|
|
cbfcnp,
|
|
/*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE,
|
|
tag_action,
|
|
data_ptr,
|
|
dxfer_len,
|
|
sense_len,
|
|
sizeof(*scsi_cmd),
|
|
timeout);
|
|
}
|
|
|
|
void
|
|
scsi_zbc_in(struct ccb_scsiio *csio, uint32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
uint8_t tag_action, uint8_t service_action, uint64_t zone_start_lba,
|
|
uint8_t zone_options, uint8_t *data_ptr, uint32_t dxfer_len,
|
|
uint8_t sense_len, uint32_t timeout)
|
|
{
|
|
struct scsi_zbc_in *scsi_cmd;
|
|
|
|
scsi_cmd = (struct scsi_zbc_in *)&csio->cdb_io.cdb_bytes;
|
|
scsi_cmd->opcode = ZBC_IN;
|
|
scsi_cmd->service_action = service_action;
|
|
scsi_ulto4b(dxfer_len, scsi_cmd->length);
|
|
scsi_u64to8b(zone_start_lba, scsi_cmd->zone_start_lba);
|
|
scsi_cmd->zone_options = zone_options;
|
|
|
|
cam_fill_csio(csio,
|
|
retries,
|
|
cbfcnp,
|
|
/*flags*/ (dxfer_len > 0) ? CAM_DIR_IN : CAM_DIR_NONE,
|
|
tag_action,
|
|
data_ptr,
|
|
dxfer_len,
|
|
sense_len,
|
|
sizeof(*scsi_cmd),
|
|
timeout);
|
|
|
|
}
|
|
|
|
int
|
|
scsi_ata_zac_mgmt_out(struct ccb_scsiio *csio, uint32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
uint8_t tag_action, int use_ncq,
|
|
uint8_t zm_action, uint64_t zone_id, uint8_t zone_flags,
|
|
uint8_t *data_ptr, uint32_t dxfer_len,
|
|
uint8_t *cdb_storage, size_t cdb_storage_len,
|
|
uint8_t sense_len, uint32_t timeout)
|
|
{
|
|
uint8_t command_out, protocol, ata_flags;
|
|
uint16_t features_out;
|
|
uint32_t sectors_out, auxiliary;
|
|
int retval;
|
|
|
|
retval = 0;
|
|
|
|
if (use_ncq == 0) {
|
|
command_out = ATA_ZAC_MANAGEMENT_OUT;
|
|
features_out = (zm_action & 0xf) | (zone_flags << 8);
|
|
ata_flags = AP_FLAG_BYT_BLOK_BLOCKS;
|
|
if (dxfer_len == 0) {
|
|
protocol = AP_PROTO_NON_DATA;
|
|
ata_flags |= AP_FLAG_TLEN_NO_DATA;
|
|
sectors_out = 0;
|
|
} else {
|
|
protocol = AP_PROTO_DMA;
|
|
ata_flags |= AP_FLAG_TLEN_SECT_CNT |
|
|
AP_FLAG_TDIR_TO_DEV;
|
|
sectors_out = ((dxfer_len >> 9) & 0xffff);
|
|
}
|
|
auxiliary = 0;
|
|
} else {
|
|
ata_flags = AP_FLAG_BYT_BLOK_BLOCKS;
|
|
if (dxfer_len == 0) {
|
|
command_out = ATA_NCQ_NON_DATA;
|
|
features_out = ATA_NCQ_ZAC_MGMT_OUT;
|
|
/*
|
|
* We're assuming the SCSI to ATA translation layer
|
|
* will set the NCQ tag number in the tag field.
|
|
* That isn't clear from the SAT-4 spec (as of rev 05).
|
|
*/
|
|
sectors_out = 0;
|
|
ata_flags |= AP_FLAG_TLEN_NO_DATA;
|
|
} else {
|
|
command_out = ATA_SEND_FPDMA_QUEUED;
|
|
/*
|
|
* Note that we're defaulting to normal priority,
|
|
* and assuming that the SCSI to ATA translation
|
|
* layer will insert the NCQ tag number in the tag
|
|
* field. That isn't clear in the SAT-4 spec (as
|
|
* of rev 05).
|
|
*/
|
|
sectors_out = ATA_SFPDMA_ZAC_MGMT_OUT << 8;
|
|
|
|
ata_flags |= AP_FLAG_TLEN_FEAT |
|
|
AP_FLAG_TDIR_TO_DEV;
|
|
|
|
/*
|
|
* For SEND FPDMA QUEUED, the transfer length is
|
|
* encoded in the FEATURE register, and 0 means
|
|
* that 65536 512 byte blocks are to be tranferred.
|
|
* In practice, it seems unlikely that we'll see
|
|
* a transfer that large, and it may confuse the
|
|
* the SAT layer, because generally that means that
|
|
* 0 bytes should be transferred.
|
|
*/
|
|
if (dxfer_len == (65536 * 512)) {
|
|
features_out = 0;
|
|
} else if (dxfer_len <= (65535 * 512)) {
|
|
features_out = ((dxfer_len >> 9) & 0xffff);
|
|
} else {
|
|
/* The transfer is too big. */
|
|
retval = 1;
|
|
goto bailout;
|
|
}
|
|
|
|
}
|
|
|
|
auxiliary = (zm_action & 0xf) | (zone_flags << 8);
|
|
protocol = AP_PROTO_FPDMA;
|
|
}
|
|
|
|
protocol |= AP_EXTEND;
|
|
|
|
retval = scsi_ata_pass(csio,
|
|
retries,
|
|
cbfcnp,
|
|
/*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE,
|
|
tag_action,
|
|
/*protocol*/ protocol,
|
|
/*ata_flags*/ ata_flags,
|
|
/*features*/ features_out,
|
|
/*sector_count*/ sectors_out,
|
|
/*lba*/ zone_id,
|
|
/*command*/ command_out,
|
|
/*device*/ 0,
|
|
/*icc*/ 0,
|
|
/*auxiliary*/ auxiliary,
|
|
/*control*/ 0,
|
|
/*data_ptr*/ data_ptr,
|
|
/*dxfer_len*/ dxfer_len,
|
|
/*cdb_storage*/ cdb_storage,
|
|
/*cdb_storage_len*/ cdb_storage_len,
|
|
/*minimum_cmd_size*/ 0,
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ timeout);
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
}
|
|
|
|
int
|
|
scsi_ata_zac_mgmt_in(struct ccb_scsiio *csio, uint32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
uint8_t tag_action, int use_ncq,
|
|
uint8_t zm_action, uint64_t zone_id, uint8_t zone_flags,
|
|
uint8_t *data_ptr, uint32_t dxfer_len,
|
|
uint8_t *cdb_storage, size_t cdb_storage_len,
|
|
uint8_t sense_len, uint32_t timeout)
|
|
{
|
|
uint8_t command_out, protocol;
|
|
uint16_t features_out, sectors_out;
|
|
uint32_t auxiliary;
|
|
int ata_flags;
|
|
int retval;
|
|
|
|
retval = 0;
|
|
ata_flags = AP_FLAG_TDIR_FROM_DEV | AP_FLAG_BYT_BLOK_BLOCKS;
|
|
|
|
if (use_ncq == 0) {
|
|
command_out = ATA_ZAC_MANAGEMENT_IN;
|
|
/* XXX KDM put a macro here */
|
|
features_out = (zm_action & 0xf) | (zone_flags << 8);
|
|
sectors_out = dxfer_len >> 9; /* XXX KDM macro */
|
|
protocol = AP_PROTO_DMA;
|
|
ata_flags |= AP_FLAG_TLEN_SECT_CNT;
|
|
auxiliary = 0;
|
|
} else {
|
|
ata_flags |= AP_FLAG_TLEN_FEAT;
|
|
|
|
command_out = ATA_RECV_FPDMA_QUEUED;
|
|
sectors_out = ATA_RFPDMA_ZAC_MGMT_IN << 8;
|
|
|
|
/*
|
|
* For RECEIVE FPDMA QUEUED, the transfer length is
|
|
* encoded in the FEATURE register, and 0 means
|
|
* that 65536 512 byte blocks are to be tranferred.
|
|
* In practice, it seems unlikely that we'll see
|
|
* a transfer that large, and it may confuse the
|
|
* the SAT layer, because generally that means that
|
|
* 0 bytes should be transferred.
|
|
*/
|
|
if (dxfer_len == (65536 * 512)) {
|
|
features_out = 0;
|
|
} else if (dxfer_len <= (65535 * 512)) {
|
|
features_out = ((dxfer_len >> 9) & 0xffff);
|
|
} else {
|
|
/* The transfer is too big. */
|
|
retval = 1;
|
|
goto bailout;
|
|
}
|
|
auxiliary = (zm_action & 0xf) | (zone_flags << 8),
|
|
protocol = AP_PROTO_FPDMA;
|
|
}
|
|
|
|
protocol |= AP_EXTEND;
|
|
|
|
retval = scsi_ata_pass(csio,
|
|
retries,
|
|
cbfcnp,
|
|
/*flags*/ CAM_DIR_IN,
|
|
tag_action,
|
|
/*protocol*/ protocol,
|
|
/*ata_flags*/ ata_flags,
|
|
/*features*/ features_out,
|
|
/*sector_count*/ sectors_out,
|
|
/*lba*/ zone_id,
|
|
/*command*/ command_out,
|
|
/*device*/ 0,
|
|
/*icc*/ 0,
|
|
/*auxiliary*/ auxiliary,
|
|
/*control*/ 0,
|
|
/*data_ptr*/ data_ptr,
|
|
/*dxfer_len*/ (dxfer_len >> 9) * 512, /* XXX KDM */
|
|
/*cdb_storage*/ cdb_storage,
|
|
/*cdb_storage_len*/ cdb_storage_len,
|
|
/*minimum_cmd_size*/ 0,
|
|
/*sense_len*/ SSD_FULL_SIZE,
|
|
/*timeout*/ timeout);
|
|
|
|
bailout:
|
|
return (retval);
|
|
}
|