04b6fa8330
facilities as well as support for the Octeon 2 family of SoCs.
XXX Note that with our antediluvian assembler, we can't support some Octeon 2
instructions and fall back to using the old ones instead.
363 lines
13 KiB
C
363 lines
13 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
|
|
* * Neither the name of Cavium Networks nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
|
|
* This Software, including technical data, may be subject to U.S. export control
|
|
* laws, including the U.S. Export Administration Act and its associated
|
|
* regulations, and may be subject to export or import regulations in other
|
|
* countries.
|
|
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
|
|
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
|
|
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
|
|
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
|
|
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
|
|
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
|
|
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
|
|
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
|
|
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
/* This file contains support functions for the Cortina IXF18201 SPI->XAUI dual
|
|
** MAC. The IXF18201 has dual SPI and dual XAUI interfaces to provide 2 10 gigabit
|
|
** interfaces.
|
|
** This file supports the EBT5810 evaluation board. To support a different board,
|
|
** the 16 bit read/write functions would need to be customized for that board, and the
|
|
** IXF18201 may need to be initialized differently as well.
|
|
**
|
|
** The IXF18201 and Octeon are configured for 2 SPI channels per interface (ports 0/1, and 16/17).
|
|
** Ports 0 and 16 are the ports that are connected to the XAUI MACs (which are connected to the SFP+ modules)
|
|
** Ports 1 and 17 are connected to the hairpin loopback port on the IXF SPI interface. All packets sent out
|
|
** of these ports are looped back the same port they were sent on. The loopback ports are always enabled.
|
|
**
|
|
** The MAC address filtering on the IXF is not enabled. Link up/down events are not detected, only SPI status
|
|
** is monitored by default, which is independent of the XAUI/SFP+ link status.
|
|
**
|
|
**
|
|
*/
|
|
#include "cvmx.h"
|
|
#include "cvmx-swap.h"
|
|
|
|
|
|
|
|
|
|
|
|
#define PAL_BASE (1ull << 63 | 0x1d030000)
|
|
#define IXF_ADDR_HI (PAL_BASE + 0xa)
|
|
#define IXF_ADDR_LO (PAL_BASE + 0xb)
|
|
#define IXF_ADDR_16 IXF_ADDR_HI /* 16 bit access */
|
|
|
|
#define IXF_WR_DATA_HI (PAL_BASE + 0xc)
|
|
#define IXF_WR_DATA_LO (PAL_BASE + 0xd)
|
|
#define IXF_WR_DATA_16 IXF_WR_DATA_HI
|
|
|
|
#define IXF_RD_DATA_HI (PAL_BASE + 0x10)
|
|
#define IXF_RD_DATA_LO (PAL_BASE + 0x11)
|
|
#define IXF_RD_DATA_16 IXF_RD_DATA_HI
|
|
|
|
#define IXF_TRANS_TYPE (PAL_BASE + 0xe)
|
|
#define IXF_TRANS_STATUS (PAL_BASE + 0xf)
|
|
|
|
|
|
uint16_t cvmx_ixf18201_read16(uint16_t reg_addr)
|
|
{
|
|
cvmx_write64_uint16(IXF_ADDR_16, reg_addr);
|
|
cvmx_write64_uint8(IXF_TRANS_TYPE, 1); // Do read
|
|
cvmx_wait(800000);
|
|
|
|
/* Read result */
|
|
return(cvmx_read64_uint16(IXF_RD_DATA_16));
|
|
}
|
|
|
|
void cvmx_ixf18201_write16(uint16_t reg_addr, uint16_t data)
|
|
{
|
|
cvmx_write64_uint16(IXF_ADDR_16, reg_addr);
|
|
cvmx_write64_uint16(IXF_WR_DATA_16, data);
|
|
cvmx_write64_uint8(IXF_TRANS_TYPE, 0);
|
|
cvmx_wait(800000);
|
|
}
|
|
|
|
|
|
|
|
uint32_t cvmx_ixf18201_read32(uint16_t reg_addr)
|
|
{
|
|
uint32_t hi, lo;
|
|
|
|
if (reg_addr & 0x1)
|
|
{
|
|
return(0xdeadbeef);
|
|
}
|
|
lo = cvmx_ixf18201_read16(reg_addr);
|
|
hi = cvmx_ixf18201_read16(reg_addr + 1);
|
|
return((hi << 16) | lo);
|
|
}
|
|
void cvmx_ixf18201_write32(uint16_t reg_addr, uint32_t data)
|
|
{
|
|
uint16_t hi, lo;
|
|
|
|
if (reg_addr & 0x1)
|
|
{
|
|
return;
|
|
}
|
|
lo = data & 0xFFFF;
|
|
hi = data >> 16;
|
|
cvmx_ixf18201_write16(reg_addr, lo);
|
|
cvmx_ixf18201_write16(reg_addr + 1, hi);
|
|
|
|
}
|
|
|
|
|
|
#define IXF_REG_MDI_CMD_ADDR1 0x310E
|
|
#define IXF_REG_MDI_RD_WR1 0x3110
|
|
void cvmx_ixf18201_mii_write(int mii_addr, int mmd, uint16_t reg, uint16_t val)
|
|
{
|
|
uint32_t cmd_val = 0;
|
|
|
|
|
|
cmd_val = reg;
|
|
cmd_val |= 0x0 << 26; // Set address operation
|
|
cmd_val |= (mii_addr & 0x1f) << 21; // Set PHY addr
|
|
cmd_val |= (mmd & 0x1f) << 16; // Set MMD
|
|
cmd_val |= 1 << 30; // Do operation
|
|
cmd_val |= 1 << 31; // enable in progress bit
|
|
|
|
|
|
|
|
/* Set up address */
|
|
cvmx_ixf18201_write32(IXF_REG_MDI_CMD_ADDR1, cmd_val);
|
|
|
|
while (cvmx_ixf18201_read32(IXF_REG_MDI_CMD_ADDR1) & ( 1 << 30))
|
|
; /* Wait for operation to complete */
|
|
|
|
|
|
cvmx_ixf18201_write32(IXF_REG_MDI_RD_WR1, val);
|
|
|
|
/* Do read operation */
|
|
cmd_val = 0;
|
|
cmd_val |= 0x1 << 26; // Set write operation
|
|
cmd_val |= (mii_addr & 0x1f) << 21; // Set PHY addr
|
|
cmd_val |= (mmd & 0x1f) << 16; // Set MMD
|
|
cmd_val |= 1 << 30; // Do operation
|
|
cmd_val |= 1 << 31; // enable in progress bit
|
|
cvmx_ixf18201_write32(IXF_REG_MDI_CMD_ADDR1, cmd_val);
|
|
|
|
while (cvmx_ixf18201_read32(IXF_REG_MDI_CMD_ADDR1) & ( 1 << 30))
|
|
; /* Wait for operation to complete */
|
|
|
|
|
|
}
|
|
|
|
|
|
int cvmx_ixf18201_mii_read(int mii_addr, int mmd, uint16_t reg)
|
|
{
|
|
uint32_t cmd_val = 0;
|
|
|
|
|
|
cmd_val = reg;
|
|
cmd_val |= 0x0 << 26; // Set address operation
|
|
cmd_val |= (mii_addr & 0x1f) << 21; // Set PHY addr
|
|
cmd_val |= (mmd & 0x1f) << 16; // Set MMD
|
|
cmd_val |= 1 << 30; // Do operation
|
|
cmd_val |= 1 << 31; // enable in progress bit
|
|
|
|
|
|
|
|
/* Set up address */
|
|
cvmx_ixf18201_write32(IXF_REG_MDI_CMD_ADDR1, cmd_val);
|
|
|
|
while (cvmx_ixf18201_read32(IXF_REG_MDI_CMD_ADDR1) & ( 1 << 30))
|
|
; /* Wait for operation to complete */
|
|
|
|
/* Do read operation */
|
|
cmd_val = 0;
|
|
cmd_val |= 0x3 << 26; // Set read operation
|
|
cmd_val |= (mii_addr & 0x1f) << 21; // Set PHY addr
|
|
cmd_val |= (mmd & 0x1f) << 16; // Set MMD
|
|
cmd_val |= 1 << 30; // Do operation
|
|
cmd_val |= 1 << 31; // enable in progress bit
|
|
cvmx_ixf18201_write32(IXF_REG_MDI_CMD_ADDR1, cmd_val);
|
|
|
|
while (cvmx_ixf18201_read32(IXF_REG_MDI_CMD_ADDR1) & ( 1 << 30))
|
|
; /* Wait for operation to complete */
|
|
|
|
cmd_val = cvmx_ixf18201_read32(IXF_REG_MDI_RD_WR1);
|
|
|
|
return(cmd_val >> 16);
|
|
|
|
}
|
|
|
|
|
|
|
|
int cvmx_ixf18201_init(void)
|
|
{
|
|
int index; /* For indexing the two 'ports' on ixf */
|
|
int offset;
|
|
|
|
/* Reset IXF, and take all blocks out of reset */
|
|
|
|
/*
|
|
Initializing...
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0003, old: 0x0000, new: 0x0001
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0003, old: 0x0001, new: 0x0000
|
|
PP0:~CONSOLE-> **** LLM201(Lochlomond) Driver loaded ****
|
|
PP0:~CONSOLE-> LLM201 Driver - Released on Tue Aug 28 09:51:30 2007.
|
|
PP0:~CONSOLE-> retval is: 0
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0003, old: 0x0000, new: 0x0001
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0003, old: 0x0001, new: 0x0000
|
|
PP0:~CONSOLE-> Brought all blocks out of reset
|
|
PP0:~CONSOLE-> Getting default config.
|
|
*/
|
|
|
|
|
|
cvmx_ixf18201_write16(0x0003, 0x0001);
|
|
cvmx_ixf18201_write16(0x0003, 0);
|
|
|
|
/*
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0000, old: 0x4014, new: 0x4010
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0000, old: 0x4010, new: 0x4014
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0004, old: 0x01ff, new: 0x0140
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0009, old: 0x007f, new: 0x0000
|
|
*/
|
|
cvmx_ixf18201_write16(0x0000, 0x4010);
|
|
cvmx_ixf18201_write16(0x0000, 0x4014);
|
|
cvmx_ixf18201_write16(0x0004, 0x0140);
|
|
cvmx_ixf18201_write16(0x0009, 0);
|
|
|
|
|
|
/*
|
|
PP0:~CONSOLE-> Changing register value, addr 0x000e, old: 0x0000, new: 0x000f
|
|
PP0:~CONSOLE-> Changing register value, addr 0x000f, old: 0x0000, new: 0x0004
|
|
PP0:~CONSOLE-> Changing register value, addr 0x000f, old: 0x0004, new: 0x0006
|
|
PP0:~CONSOLE-> Changing register value, addr 0x000e, old: 0x000f, new: 0x00f0
|
|
PP0:~CONSOLE-> Changing register value, addr 0x000f, old: 0x0006, new: 0x0040
|
|
PP0:~CONSOLE-> Changing register value, addr 0x000f, old: 0x0040, new: 0x0060
|
|
*/
|
|
// skip GPIO, 0xe/0xf
|
|
|
|
|
|
/*
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3100, old: 0x57fb, new: 0x7f7b
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3600, old: 0x57fb, new: 0x7f7b
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3005, old: 0x8010, new: 0x0040
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3006, old: 0x061a, new: 0x0000
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3505, old: 0x8010, new: 0x0040
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3506, old: 0x061a, new: 0x0000
|
|
*/
|
|
for (index = 0; index < 2;index++ )
|
|
{
|
|
offset = 0x500 * index;
|
|
cvmx_ixf18201_write32(0x3100 + offset, 0x47f7b);
|
|
cvmx_ixf18201_write16(0x3005 + offset, 0x0040);
|
|
cvmx_ixf18201_write16(0x3006 + offset, 0);
|
|
}
|
|
|
|
/*PP0:~CONSOLE-> *** SPI soft reset ***, block id: 0
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3007, old: 0xf980, new: 0xf9c0
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3008, old: 0xa6f0, new: 0x36f0
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3000, old: 0x0080, new: 0x0060
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3002, old: 0x0200, new: 0x0040
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3003, old: 0x0100, new: 0x0000
|
|
PP0:~CONSOLE-> Changing register value, addr 0x30c2, old: 0x0080, new: 0x0060
|
|
PP0:~CONSOLE-> Changing register value, addr 0x300a, old: 0x0800, new: 0x0000
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3007, old: 0xf9c0, new: 0x89c0
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3016, old: 0x0000, new: 0x0010
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3008, old: 0x36f0, new: 0x3610
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3012, old: 0x0000, new: 0x0010
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3007, old: 0x89c0, new: 0x8980
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3008, old: 0x3610, new: 0xa210
|
|
PP0:~CONSOLE->
|
|
|
|
*/
|
|
|
|
|
|
for (index = 0; index < 2;index++ )
|
|
{
|
|
offset = 0x500 * index;
|
|
int cal_len_min_1 = 0; /* Calendar length -1. Must match number
|
|
** of ports configured for interface.*/
|
|
cvmx_ixf18201_write16(0x3007 + offset, 0x81c0 | (cal_len_min_1 << 11));
|
|
cvmx_ixf18201_write16(0x3008 + offset, 0x3600 | (cal_len_min_1 << 4));
|
|
cvmx_ixf18201_write16(0x3000 + offset, 0x0060);
|
|
cvmx_ixf18201_write16(0x3002 + offset, 0x0040);
|
|
cvmx_ixf18201_write16(0x3003 + offset, 0x0000);
|
|
cvmx_ixf18201_write16(0x30c2 + offset, 0x0060);
|
|
cvmx_ixf18201_write16(0x300a + offset, 0x0000);
|
|
cvmx_ixf18201_write16(0x3007 + offset, 0x81c0 | (cal_len_min_1 << 11));
|
|
cvmx_ixf18201_write16(0x3016 + offset, 0x0010);
|
|
cvmx_ixf18201_write16(0x3008 + offset, 0x3600 | (cal_len_min_1 << 4));
|
|
cvmx_ixf18201_write16(0x3012 + offset, 0x0010);
|
|
cvmx_ixf18201_write16(0x3007 + offset, 0x8180 | (cal_len_min_1 << 11));
|
|
cvmx_ixf18201_write16(0x3008 + offset, 0xa200 | (cal_len_min_1 << 4));
|
|
|
|
cvmx_ixf18201_write16(0x3090 + offset, 0x0301); /* Enable hairpin loopback */
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0004, old: 0x0140, new: 0x1fff
|
|
PP0:~CONSOLE-> Changing register value, addr 0x0009, old: 0x0000, new: 0x007f
|
|
PP0:~CONSOLE-> Changing register value, addr 0x310b, old: 0x0004, new: 0xffff
|
|
PP0:~CONSOLE-> Changing register value, addr 0x310a, old: 0x7f7b, new: 0xffff
|
|
|
|
*/
|
|
|
|
cvmx_ixf18201_write16(0x0004, 0x1fff);
|
|
cvmx_ixf18201_write16(0x0009, 0x007f);
|
|
#if 0
|
|
/* MDI autoscan */
|
|
cvmx_ixf18201_write16(0x310b, 0xffff);
|
|
cvmx_ixf18201_write16(0x310a, 0xffff);
|
|
#endif
|
|
|
|
|
|
/*
|
|
*** 32 bit register, trace only captures part of it...
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3100, old: 0x7f7b, new: 0x7f78
|
|
PP0:~CONSOLE-> Changing register value, addr 0x3600, old: 0x7f7b, new: 0x7f78
|
|
*/
|
|
|
|
for (index = 0; index < 2;index++ )
|
|
{
|
|
offset = 0x500 * index;
|
|
cvmx_ixf18201_write32(0x3100 + offset, 0x47f7c); /* Also enable jumbo frames */
|
|
/* Set max packet size to 9600 bytes, max supported by IXF18201 */
|
|
cvmx_ixf18201_write32(0x3114 + offset, 0x25800000);
|
|
}
|
|
|
|
|
|
cvmx_wait(100000000);
|
|
|
|
/* Now reset the PCS blocks in the phy. This seems to be required after
|
|
** bringing up the Cortina. */
|
|
cvmx_ixf18201_mii_write(1, 3, 0, 0x8000);
|
|
cvmx_ixf18201_mii_write(5, 3, 0, 0x8000);
|
|
|
|
|
|
return 1;
|
|
|
|
}
|