freebsd-nq/sys/arm/at91/at91_usartreg.h
Warner Losh 82645a84eb Tweak the disclaimer section of the license to match COPYRIGHT, for
better or worse.  Ok'd by folks that have additional copyrights to the
files in cases where there's joint authorship.
2008-11-25 00:13:26 +00:00

130 lines
6.2 KiB
C

/*-
* Copyright (c) 2005 Olivier Houchard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef AT91USARTREG_H_
#define AT91USARTREG_H_
#define USART_CR 0x00 /* Control register */
#define USART_CR_RSTRX (1UL << 2) /* Reset Receiver */
#define USART_CR_RSTTX (1UL << 3) /* Reset Transmitter */
#define USART_CR_RXEN (1UL << 4) /* Receiver Enable */
#define USART_CR_RXDIS (1UL << 5) /* Receiver Disable */
#define USART_CR_TXEN (1UL << 6) /* Transmitter Enable */
#define USART_CR_TXDIS (1UL << 7) /* Transmitter Disable */
#define USART_CR_RSTSTA (1UL << 8) /* Reset Status Bits */
#define USART_CR_STTBRK (1UL << 9) /* Start Break */
#define USART_CR_STPBRK (1UL << 10) /* Stop Break */
#define USART_CR_STTTO (1UL << 11) /* Start Time-out */
#define USART_CR_SENDA (1UL << 12) /* Send Address */
#define USART_CR_RSTIT (1UL << 13) /* Reset Iterations */
#define USART_CR_RSTNACK (1UL << 14) /* Reset Non Acknowledge */
#define USART_CR_RETTO (1UL << 15) /* Rearm Time-out */
#define USART_CR_DTREN (1UL << 16) /* Data Terminal ready Enable */
#define USART_CR_DTRDIS (1UL << 17) /* Data Terminal ready Disable */
#define USART_CR_RTSEN (1UL << 18) /* Request to Send enable */
#define USART_CR_RTSDIS (1UL << 19) /* Request to Send Disable */
#define USART_MR 0x04 /* Mode register */
#define USART_MR_MODE_NORMAL 0 /* Normal/Async/3-wire rs-232 */
#define USART_MR_MODE_RS485 1 /* RS485 */
#define USART_MR_MODE_HWFLOW 2 /* Hardware flow control/handshake */
#define USART_MR_MODE_MODEM 3 /* Full modem protocol */
#define USART_MR_MODE_ISO7816T0 4 /* ISO7816 T=0 */
#define USART_MR_MODE_ISO7816T1 6 /* ISO7816 T=1 */
#define USART_MR_MODE_IRDA 8 /* IrDA mode */
#define USART_MR_USCLKS_MCK (0U << 4) /* use MCK for baudclock */
#define USART_MR_USCLKS_MCKDIV (1U << 4) /* use MCK/DIV for baudclock */
#define USART_MR_USCLKS_SCK (3U << 4) /* use SCK (ext) for baudclock */
#define USART_MR_CHRL_5BITS (0U << 6)
#define USART_MR_CHRL_6BITS (1U << 6)
#define USART_MR_CHRL_7BITS (2U << 6)
#define USART_MR_CHRL_8BITS (3U << 6)
#define USART_MR_SYNC (1U << 8) /* 1 -> sync 0 -> async */
#define USART_MR_PAR_EVEN (0U << 9)
#define USART_MR_PAR_ODD (1U << 9)
#define USART_MR_PAR_SPACE (2U << 9)
#define USART_MR_PAR_MARK (3U << 9)
#define USART_MR_PAR_NONE (4U << 9)
#define USART_MR_PAR_MULTIDROP (6U << 9)
#define USART_MR_NBSTOP_1 (0U << 12)
#define USART_MR_NBSTOP_1_5 (1U << 12)
#define USART_MR_NBSTOP_2 (2U << 12)
#define USART_MR_CHMODE_NORMAL (0U << 14)
#define USART_MR_CHMODE_ECHO (1U << 14)
#define USART_MR_CHMODE_LOOP (2U << 14)
#define USART_MR_CHMODE_REMLOOP (3U << 14)
#define USART_MR_MSBF (1U << 16)
#define USART_MR_MODE9 (1U << 17)
#define USART_MR_CKLO_SCK (1U << 18)
#define USART_MR_OVER16 0
#define USART_MR_OVER8 (1U << 19)
#define USART_MR_INACK (1U << 20) /* Inhibit NACK generation */
#define USART_MR_DSNACK (1U << 21) /* Disable Successive NACK */
#define USART_MR_MAXITERATION(x) ((x) << 24)
#define USART_MR_FILTER (1U << 28) /* Filters for Ir lines */
#define USART_IER 0x08 /* Interrupt enable register */
#define USART_IDR 0x0c /* Interrupt disable register */
#define USART_IMR 0x10 /* Interrupt mask register */
#define USART_CSR 0x14 /* Channel status register */
#define USART_CSR_RXRDY (1UL << 0) /* Receiver ready */
#define USART_CSR_TXRDY (1UL << 1) /* Transmitter ready */
#define USART_CSR_RXBRK (1UL << 2) /* Break received */
#define USART_CSR_ENDRX (1UL << 3) /* End of Transfer RX from PDC */
#define USART_CSR_ENDTX (1UL << 4) /* End of Transfer TX from PDC */
#define USART_CSR_OVRE (1UL << 5) /* Overrun error */
#define USART_CSR_FRAME (1UL << 6) /* Framing error */
#define USART_CSR_PARE (1UL << 7) /* Parity Error */
#define USART_CSR_TIMEOUT (1UL << 8) /* Timeout since start-timeout */
#define USART_CSR_TXEMPTY (1UL << 9) /* Transmitter empty */
#define USART_CSR_ITERATION (1UL << 10) /* max repetitions since RSIT */
#define USART_CSR_TXBUFE (1UL << 11) /* Buffer empty from PDC */
#define USART_CSR_RXBUFF (1UL << 12) /* Buffer full from PDC */
#define USART_CSR_NACK (1UL << 13) /* NACK since last RSTNACK */
#define USART_CSR_RIIC (1UL << 16) /* RI delta since last csr read */
#define USART_CSR_DSRIC (1UL << 17) /* DSR delta */
#define USART_CSR_DCDIC (1UL << 18) /* DCD delta */
#define USART_CSR_CTSIC (1UL << 19) /* CTS delta */
#define USART_CSR_RI (1UL << 20) /* RI status */
#define USART_CSR_DSR (1UL << 21) /* DSR status */
#define USART_CSR_DCD (1UL << 22) /* DCD status */
#define USART_CSR_CTS (1UL << 23) /* CTS status */
#define USART_RHR 0x18 /* Receiver holding register */
#define USART_THR 0x1c /* Transmitter holding register */
#define USART_BRGR 0x20 /* Baud rate generator register */
#define USART_RTOR 0x24 /* Receiver time-out register */
#define USART_TTR 0x28 /* Transmitter timeguard register */
/* 0x2c to 0x3c reserved */
#define USART_FDRR 0x40 /* FI DI ratio register */
#define USART_NER 0x44 /* Number of errors register */
/* 0x48 reserved */
#define USART_IFR 0x48 /* IrDA filter register */
#endif /* AT91RM92REG_H_ */