freebsd-nq/etc/ppp/ppp.conf.sample
Andrey A. Chernov 6a076cdd9a Fix several places where interface netmask was in place of route netmask
Fix dialout device name
Add multi-phone example
1996-03-08 09:39:45 +00:00

133 lines
3.6 KiB
Plaintext

#################################################################
#
# PPP Sample Configuration File
#
# Written by Toshiharu OHNO
#
# $Id: ppp.conf.sample,v 1.4 1996/01/31 15:03:05 mpp Exp $
#
#################################################################
#
# Default setup. Executed always when PPP is invoked.
#
default:
set device /dev/cuaa1
set speed 38400
disable lqr
deny lqr
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
#
# Example with login script
# o From PPP prompt,
# ppp> dial simplesite
# will automatically dials and perform login procedure.
#
# ppp> load simplesite
# will also load and execute commands, but don't dial.
#
# o From shell, invoke as
# % ppp simplesite
# will load commands associated with the label. Use,
# ppp> dial
# to establish the connection.
#
simplesite:
set phone 12345678
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
set timeout 120
#
# Multi-phone example
#
multiphone:
set phone 12345678:12345679:12345670:12345671
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
#
# If peer requires to use CHAP, don't forget to supply authname and authkey.
#
# If you'd like to use CHAP to authentication peer, comment out the line
# ``enable chap'' below. You also need to prepare /etc/ppp.secret.
#
# If remote system sends its system name within CHAP packet and it is
# found in /etc/ppp.secret, then secret key is taken from the file and
# value of authkey is ignored.
#
chapsite:
set phone 12345678
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
deny pap
accept chap
# enable chap
set authname MySystemName
set authkey OurSecretKey
#
# To speak PAP is just similar to CHAP
#
papsite:
set phone 12345678
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
deny chap
accept pap
# enable pap
set authname MyUserName
set authkey MyPassword
#
# On demand dialup example
# Here, we assume that local side use 192.244.185.226 and
# remote side use 192.244.176.44 as their IP address.
# You must supply -auto option to invoke PPP.
#
# ex. % ppp -auto ondemand
#
ondemand:
set phone 1234567
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
set timeout 120
set ifaddr 192.244.185.226 192.244.176.44 255.255.255.0
add 0 0 192.244.176.44
#
# Another on demand example
# If peer assign some IP address for us, and we can't predict it
# until we make a connection, use 0 as local side address.
#
pmdemend:
set phone 1234567
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
set timeout 120
set ifaddr 0 192.244.176.44 255.255.255.0
add 0 0 192.244.176.44
#
# Example to validate incoming user with CHAP
# Invod as ``ppp -direct users'' from login script. User's system name
# and secret-key must be registered into /etc/ppp.secret.
# IP address assigned to peer is registered in ppp.secret, then that
# value is used and value in ``ifaddr'' command has no effect.
#
users:
disable pap
enable chap
enable proxy
set authname ppp-server
set ifaddr 192.244.176.44 292.244.184.31
#
# Example of Callback Request
#
# Here, we assume that peer will hangup the line and initiates a callback
# after successful authentication. We simply use chat script capability
# and wait for a "NO CARRIER" response from our modem.
#
# % ppp callback
#
callback:
set phone 0312345678
set login "ABORT NO\\sCARRIER TIMEOUT 5 login:-\\r-login: MyName word: MySecret TIMEOUT 20 DUMMY"
set debug phase chat
dial
quit
#
# Example for PPP/TELNET and PPP/TCP. Read doc for further details
#
ppptelnet:
set escape 0xff
ppptcp:
set device 192.244.191.33:2400