freebsd-nq/sys/mips/ingenic/jz4780_pdma.h
Ruslan Bukin 3d5b3b0a44 Tune xDMA interface slightly:
o Move descriptors allocation to DMA engine driver
o Add generic xdma_request() routine
o Add less-generic scatter-gather application based on xdma interface

Typical operation flow in peripheral device driver is:

1. Get xDMA controller
sc->xdma_tx = xdma_ofw_get(sc->dev, "tx");

2. Allocate virtual channel
sc->xchan_tx = xdma_channel_alloc(sc->xdma_tx, caps);

3. Setup transfer status callback
xdma_setup_intr(sc->xchan_tx, my_tx_intr, sc, &sc->ih_tx);

4. Request a transfer(s)
ret = xdma_request(sc->xchan_tx, &req);

5. Free the channel
xdma_channel_free(sc->xdma_tx);

6. Free the controller
xdma_put(sc->xdma_tx);

Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D14971
2018-04-12 15:36:24 +00:00

110 lines
5.1 KiB
C

/*-
* Copyright (c) 2016 Ruslan Bukin <br@bsdpad.com>
* All rights reserved.
*
* This software was developed by SRI International and the University of
* Cambridge Computer Laboratory under DARPA/AFRL contract FA8750-10-C-0237
* ("CTSRD"), as part of the DARPA CRASH research programme.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/* DMA Channel Registers */
#define PDMA_DSA(n) (0x00 + 0x20 * n) /* Channel n Source Address */
#define PDMA_DTA(n) (0x04 + 0x20 * n) /* Channel n Target Address */
#define PDMA_DTC(n) (0x08 + 0x20 * n) /* Channel n Transfer Count */
#define PDMA_DRT(n) (0x0C + 0x20 * n) /* Channel n Request Source */
#define DRT_AUTO (1 << 3) /* Auto-request. */
#define PDMA_DCS(n) (0x10 + 0x20 * n) /* Channel n Control/Status */
#define DCS_NDES (1 << 31) /* Non-descriptor mode. */
#define DCS_DES8 (1 << 30) /* Descriptor 8 Word. */
#define DCS_AR (1 << 4) /* Address Error. */
#define DCS_TT (1 << 3) /* Transfer Terminate. */
#define DCS_HLT (1 << 2) /* DMA halt. */
#define DCS_CTE (1 << 0) /* Channel transfer enable. */
#define PDMA_DCM(n) (0x14 + 0x20 * n) /* Channel n Command */
#define DCM_SAI (1 << 23) /* Source Address Increment. */
#define DCM_DAI (1 << 22) /* Destination Address Increment. */
#define DCM_SP_S 14 /* Source port width. */
#define DCM_SP_M (0x3 << DCM_SP_S)
#define DCM_SP_1 (0x1 << DCM_SP_S) /* 1 byte */
#define DCM_SP_2 (0x2 << DCM_SP_S) /* 2 bytes */
#define DCM_SP_4 (0x0 << DCM_SP_S) /* 4 bytes */
#define DCM_DP_S 12 /* Destination port width. */
#define DCM_DP_M (0x3 << DCM_DP_S)
#define DCM_DP_1 (0x1 << DCM_DP_S) /* 1 byte */
#define DCM_DP_2 (0x2 << DCM_DP_S) /* 2 bytes */
#define DCM_DP_4 (0x0 << DCM_DP_S) /* 4 bytes */
#define DCM_TSZ_S 8 /* Transfer Data Size of a data unit. */
#define DCM_TSZ_M (0x7 << DCM_TSZ_S)
#define DCM_TSZ_A (0x7 << DCM_TSZ_S) /* Autonomy */
#define DCM_TSZ_1 (0x1 << DCM_TSZ_S)
#define DCM_TSZ_2 (0x2 << DCM_TSZ_S)
#define DCM_TSZ_4 (0x0 << DCM_TSZ_S)
#define DCM_TSZ_16 (0x3 << DCM_TSZ_S)
#define DCM_TSZ_32 (0x4 << DCM_TSZ_S)
#define DCM_TSZ_64 (0x5 << DCM_TSZ_S)
#define DCM_TSZ_128 (0x6 << DCM_TSZ_S)
#define DCM_TIE (1 << 1) /* Transfer Interrupt Enable (TIE). */
#define DCM_LINK (1 << 0) /* Descriptor Link Enable. */
#define PDMA_DDA(n) (0x18 + 0x20 * n) /* Channel n Descriptor Address */
#define PDMA_DSD(n) (0x1C + 0x20 * n) /* Channel n Stride Difference */
/* Global Control Registers */
#define PDMA_DMAC 0x1000 /* DMA Control */
#define DMAC_FMSC (1 << 31)
#define DMAC_INTCC_S 17
#define DMAC_INTCC_M (0x1f << DMAC_INTCC_S)
#define DMAC_INTCE (1 << 16) /* Permit INTC_IRQ to be bound to one of programmable channel. */
#define DMAC_HLT (1 << 3) /* Global halt status */
#define DMAC_AR (1 << 2) /* Global address error status */
#define DMAC_DMAE (1 << 0) /* Enable DMA. */
#define PDMA_DIRQP 0x1004 /* DMA Interrupt Pending */
#define PDMA_DDB 0x1008 /* DMA Doorbell */
#define PDMA_DDS 0x100C /* DMA Doorbell Set */
#define PDMA_DIP 0x1010 /* Descriptor Interrupt Pending */
#define PDMA_DIC 0x1014 /* Descriptor Interrupt Clear */
#define PDMA_DMACP 0x101C /* DMA Channel Programmable */
#define PDMA_DSIRQP 0x1020 /* Channel soft IRQ to MCU */
#define PDMA_DSIRQM 0x1024 /* Channel soft IRQ mask */
#define PDMA_DCIRQP 0x1028 /* Channel IRQ to MCU */
#define PDMA_DCIRQM 0x102C /* Channel IRQ to MCU mask */
#define PDMA_DMCS 0x1030 /* MCU Control and Status */
#define PDMA_DMNMB 0x1034 /* MCU Normal Mailbox */
#define PDMA_DMSMB 0x1038 /* MCU Security Mailbox */
#define PDMA_DMINT 0x103C /* MCU Interrupt */
struct pdma_hwdesc {
uint32_t dcm; /* DMA Channel Command */
uint32_t dsa; /* DMA Source Address */
uint32_t dta; /* DMA Target Address */
uint32_t dtc; /* DMA Transfer Counter */
uint32_t sd; /* Stride Address */
uint32_t drt; /* DMA Request Type */
uint32_t reserved[2];
};
#define CHAN_DESC_COUNT 4096
#define CHAN_DESC_SIZE (sizeof(struct pdma_hwdesc) * CHAN_DESC_COUNT)