freebsd-nq/sys/dev/usb/net/if_axgereg.h
Kevin Lo d32048bb6d - Improve performance by fixing incorrect Rx/Tx handling
- Rename definition of AXGE_* to reflect reality
- Add new USB IDs
2014-05-27 08:14:54 +00:00

174 lines
4.8 KiB
C

/*-
* Copyright (c) 2013-2014 Kevin Lo
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#define AXGE_ACCESS_MAC 0x01
#define AXGE_ACCESS_PHY 0x02
#define AXGE_ACCESS_WAKEUP 0x03
#define AXGE_ACCESS_EEPROM 0x04
#define AXGE_ACCESS_EFUSE 0x05
#define AXGE_RELOAD_EEPROM_EFUSE 0x06
#define AXGE_WRITE_EFUSE_EN 0x09
#define AXGE_WRITE_EFUSE_DIS 0x0A
#define AXGE_ACCESS_MFAB 0x10
/* Physical link status register */
#define AXGE_PLSR 0x02
#define PLSR_USB_FS 0x01
#define PLSR_USB_HS 0x02
#define PLSR_USB_SS 0x04
/* EEPROM address register */
#define AXGE_EAR 0x07
/* EEPROM data low register */
#define AXGE_EDLR 0x08
/* EEPROM data high register */
#define AXGE_EDHR 0x09
/* EEPROM command register */
#define AXGE_ECR 0x0a
/* Rx control register */
#define AXGE_RCR 0x0b
#define RCR_STOP 0x0000
#define RCR_PRO 0x0001
#define RCR_AMALL 0x0002
#define RCR_AB 0x0008
#define RCR_AM 0x0010
#define RCR_AP 0x0020
#define RCR_SO 0x0080
#define RCR_DROP_CRCE 0x0100
#define RCR_IPE 0x0200
#define RCR_TX_CRC_PAD 0x0400
/* Node id register */
#define AXGE_NIDR 0x10
/* Multicast filter array */
#define AXGE_MFA 0x16
/* Medium status register */
#define AXGE_MSR 0x22
#define MSR_GM 0x0001
#define MSR_FD 0x0002
#define MSR_EN_125MHZ 0x0008
#define MSR_RFC 0x0010
#define MSR_TFC 0x0020
#define MSR_RE 0x0100
#define MSR_PS 0x0200
/* Monitor mode status register */
#define AXGE_MMSR 0x24
#define MMSR_RWLC 0x02
#define MMSR_RWMP 0x04
#define MMSR_RWWF 0x08
#define MMSR_RW_FLAG 0x10
#define MMSR_PME_POL 0x20
#define MMSR_PME_TYPE 0x40
#define MMSR_PME_IND 0x80
/* GPIO control/status register */
#define AXGE_GPIOCR 0x25
/* Ethernet PHY power & reset control register */
#define AXGE_EPPRCR 0x26
#define EPPRCR_BZ 0x0010
#define EPPRCR_IPRL 0x0020
#define EPPRCR_AUTODETACH 0x1000
#define AXGE_RX_BULKIN_QCTRL 0x2e
#define AXGE_CLK_SELECT 0x33
#define AXGE_CLK_SELECT_BCS 0x01
#define AXGE_CLK_SELECT_ACS 0x02
#define AXGE_CLK_SELECT_ACSREQ 0x10
#define AXGE_CLK_SELECT_ULR 0x08
/* COE Rx control register */
#define AXGE_CRCR 0x34
#define CRCR_IP 0x01
#define CRCR_TCP 0x02
#define CRCR_UDP 0x04
#define CRCR_ICMP 0x08
#define CRCR_IGMP 0x10
#define CRCR_TCPV6 0x20
#define CRCR_UDPV6 0x40
#define CRCR_ICMPV6 0x80
/* COE Tx control register */
#define AXGE_CTCR 0x35
#define CTCR_IP 0x01
#define CTCR_TCP 0x02
#define CTCR_UDP 0x04
#define CTCR_ICMP 0x08
#define CTCR_IGMP 0x10
#define CTCR_TCPV6 0x20
#define CTCR_UDPV6 0x40
#define CTCR_ICMPV6 0x80
/* Pause water level high register */
#define AXGE_PWLHR 0x54
/* Pause water level low register */
#define AXGE_PWLLR 0x55
#define AXGE_CONFIG_IDX 0 /* config number 1 */
#define AXGE_IFACE_IDX 0
#define AXGE_RXHDR_L4_TYPE_MASK 0x1c
#define AXGE_RXHDR_L4CSUM_ERR 1
#define AXGE_RXHDR_L3CSUM_ERR 2
#define AXGE_RXHDR_L4_TYPE_UDP 4
#define AXGE_RXHDR_L4_TYPE_TCP 16
#define AXGE_RXHDR_CRC_ERR 0x20000000
#define AXGE_RXHDR_DROP_ERR 0x80000000
#define GET_MII(sc) uether_getmii(&(sc)->sc_ue)
/* The interrupt endpoint is currently unused by the ASIX part. */
enum {
AXGE_BULK_DT_WR,
AXGE_BULK_DT_RD,
AXGE_N_TRANSFER,
};
struct axge_softc {
struct usb_ether sc_ue;
struct mtx sc_mtx;
struct usb_xfer *sc_xfer[AXGE_N_TRANSFER];
int sc_phyno;
int sc_flags;
#define AXGE_FLAG_LINK 0x0001 /* got a link */
};
#define AXGE_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define AXGE_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define AXGE_LOCK_ASSERT(_sc, t) mtx_assert(&(_sc)->sc_mtx, t)