freebsd-nq/sys/dev/ixgbe/ixgbe_phy.h
Jack F Vogel d8602bb9a7 Update for the Intel 10G driver, this adds support for
newest hardware, adds multiqueue tx interface, infrastructure
cleanup to allow up to 32 MSIX vectors on newer Nehalem systems.
Bug fixes, etc.
2009-06-24 18:27:07 +00:00

130 lines
5.7 KiB
C

/******************************************************************************
Copyright (c) 2001-2009, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
/*$FreeBSD$*/
#ifndef _IXGBE_PHY_H_
#define _IXGBE_PHY_H_
#include "ixgbe_type.h"
#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
/* EEPROM byte offsets */
#define IXGBE_SFF_IDENTIFIER 0x0
#define IXGBE_SFF_IDENTIFIER_SFP 0x3
#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
#define IXGBE_SFF_1GBE_COMP_CODES 0x6
#define IXGBE_SFF_10GBE_COMP_CODES 0x3
#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
/* Bitmasks */
#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
#define IXGBE_SFF_1GBASESX_CAPABLE 0x1
#define IXGBE_SFF_1GBASELX_CAPABLE 0x2
#define IXGBE_SFF_10GBASESR_CAPABLE 0x10
#define IXGBE_SFF_10GBASELR_CAPABLE 0x20
#define IXGBE_I2C_EEPROM_READ_MASK 0x100
#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
/* Bit-shift macros */
#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
/* I2C SDA and SCL timing parameters for standard mode */
#define IXGBE_I2C_T_HD_STA 4
#define IXGBE_I2C_T_LOW 5
#define IXGBE_I2C_T_HIGH 4
#define IXGBE_I2C_T_SU_STA 5
#define IXGBE_I2C_T_HD_DATA 5
#define IXGBE_I2C_T_SU_DATA 1
#define IXGBE_I2C_T_RISE 1
#define IXGBE_I2C_T_FALL 1
#define IXGBE_I2C_T_SU_STO 4
#define IXGBE_I2C_T_BUF 5
s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 *phy_data);
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data);
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete);
s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
bool *autoneg);
/* PHY specific */
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
bool *link_up);
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
u16 *firmware_version);
s32 ixgbe_get_phy_firmware_version_aq(struct ixgbe_hw *hw,
u16 *firmware_version);
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 *list_offset,
u16 *data_offset);
s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data);
s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data);
s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data);
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 eeprom_data);
#endif /* _IXGBE_PHY_H_ */