155 lines
7.3 KiB
C
155 lines
7.3 KiB
C
/*-
|
|
* Copyright (c) 2003
|
|
* Bill Paul <wpaul@windriver.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _DEV_MII_RGEPHYREG_H_
|
|
#define _DEV_MII_RGEPHYREG_H_
|
|
|
|
/*
|
|
* RealTek 8169S/8110S gigE PHY registers
|
|
*/
|
|
|
|
#define RGEPHY_MII_BMCR 0x00
|
|
#define RGEPHY_BMCR_RESET 0x8000
|
|
#define RGEPHY_BMCR_LOOP 0x4000
|
|
#define RGEPHY_BMCR_SPD0 0x2000 /* speed select, lower bit */
|
|
#define RGEPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */
|
|
#define RGEPHY_BMCR_PDOWN 0x0800 /* Power down */
|
|
#define RGEPHY_BMCR_ISO 0x0400 /* Isolate */
|
|
#define RGEPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */
|
|
#define RGEPHY_BMCR_FDX 0x0100 /* Duplex mode */
|
|
#define RGEPHY_BMCR_CTEST 0x0080 /* Collision test enable */
|
|
#define RGEPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */
|
|
|
|
#define RGEPHY_S1000 RGEPHY_BMCR_SPD1 /* 1000mbps */
|
|
#define RGEPHY_S100 RGEPHY_BMCR_SPD0 /* 100mpbs */
|
|
#define RGEPHY_S10 0 /* 10mbps */
|
|
|
|
#define RGEPHY_MII_BMSR 0x01
|
|
#define RGEPHY_BMSR_100T4 0x8000 /* 100 base T4 capable */
|
|
#define RGEPHY_BMSR_100TXFDX 0x4000 /* 100 base Tx full duplex capable */
|
|
#define RGEPHY_BMSR_100TXHDX 0x2000 /* 100 base Tx half duplex capable */
|
|
#define RGEPHY_BMSR_10TFDX 0x1000 /* 10 base T full duplex capable */
|
|
#define RGEPHY_BMSR_10THDX 0x0800 /* 10 base T half duplex capable */
|
|
#define RGEPHY_BMSR_100T2FDX 0x0400 /* 100 base T2 full duplex capable */
|
|
#define RGEPHY_BMSR_100T2HDX 0x0200 /* 100 base T2 half duplex capable */
|
|
#define RGEPHY_BMSR_EXTSTS 0x0100 /* Extended status present */
|
|
#define RGEPHY_BMSR_PRESUB 0x0040 /* Preamble surpression */
|
|
#define RGEPHY_BMSR_ACOMP 0x0020 /* Autoneg complete */
|
|
#define RGEPHY_BMSR_RFAULT 0x0010 /* Remote fault condition occured */
|
|
#define RGEPHY_BMSR_ANEG 0x0008 /* Autoneg capable */
|
|
#define RGEPHY_BMSR_LINK 0x0004 /* Link status */
|
|
#define RGEPHY_BMSR_JABBER 0x0002 /* Jabber detected */
|
|
#define RGEPHY_BMSR_EXT 0x0001 /* Extended capability */
|
|
|
|
#define RGEPHY_MII_ANAR 0x04
|
|
#define RGEPHY_ANAR_NP 0x8000 /* Next page */
|
|
#define RGEPHY_ANAR_RF 0x2000 /* Remote fault */
|
|
#define RGEPHY_ANAR_ASP 0x0800 /* Asymmetric Pause */
|
|
#define RGEPHY_ANAR_PC 0x0400 /* Pause capable */
|
|
#define RGEPHY_ANAR_T4 0x0200 /* local device supports 100bT4 */
|
|
#define RGEPHY_ANAR_TX_FD 0x0100 /* local device supports 100bTx FD */
|
|
#define RGEPHY_ANAR_TX 0x0080 /* local device supports 100bTx */
|
|
#define RGEPHY_ANAR_10_FD 0x0040 /* local device supports 10bT FD */
|
|
#define RGEPHY_ANAR_10 0x0020 /* local device supports 10bT */
|
|
#define RGEPHY_ANAR_SEL 0x001F /* selector field, 00001=Ethernet */
|
|
|
|
#define RGEPHY_MII_ANLPAR 0x05
|
|
#define RGEPHY_ANLPAR_NP 0x8000 /* Next page */
|
|
#define RGEPHY_ANLPAR_RF 0x2000 /* Remote fault */
|
|
#define RGEPHY_ANLPAR_ASP 0x0800 /* Asymmetric Pause */
|
|
#define RGEPHY_ANLPAR_PC 0x0400 /* Pause capable */
|
|
#define RGEPHY_ANLPAR_T4 0x0200 /* link partner supports 100bT4 */
|
|
#define RGEPHY_ANLPAR_TX_FD 0x0100 /* link partner supports 100bTx FD */
|
|
#define RGEPHY_ANLPAR_TX 0x0080 /* link partner supports 100bTx */
|
|
#define RGEPHY_ANLPAR_10_FD 0x0040 /* link partner supports 10bT FD */
|
|
#define RGEPHY_ANLPAR_10 0x0020 /* link partner supports 10bT */
|
|
#define RGEPHY_ANLPAR_SEL 0x001F /* selector field, 00001=Ethernet */
|
|
|
|
#define RGEPHY_SEL_TYPE 0x0001 /* ethernet */
|
|
|
|
#define RGEPHY_MII_ANER 0x06
|
|
#define RGEPHY_ANER_PDF 0x0010 /* Parallel detection fault */
|
|
#define RGEPHY_ANER_LPNP 0x0008 /* Link partner can next page */
|
|
#define RGEPHY_ANER_NP 0x0004 /* Local PHY can next page */
|
|
#define RGEPHY_ANER_RX 0x0002 /* Next page received */
|
|
#define RGEPHY_ANER_LPAN 0x0001 /* Link partner autoneg capable */
|
|
|
|
#define RGEPHY_MII_NEXTP 0x07 /* Next page */
|
|
|
|
#define RGEPHY_MII_NEXTP_LP 0x08 /* Next page of link partner */
|
|
|
|
#define RGEPHY_MII_1000CTL 0x09 /* 1000baseT control */
|
|
#define RGEPHY_1000CTL_TST 0xE000 /* test modes */
|
|
#define RGEPHY_1000CTL_MSE 0x1000 /* Master/Slave manual enable */
|
|
#define RGEPHY_1000CTL_MSC 0x0800 /* Master/Slave select */
|
|
#define RGEPHY_1000CTL_RD 0x0400 /* Repeater/DTE */
|
|
#define RGEPHY_1000CTL_AFD 0x0200 /* Advertise full duplex */
|
|
#define RGEPHY_1000CTL_AHD 0x0100 /* Advertise half duplex */
|
|
|
|
#define RGEPHY_TEST_TX_JITTER 0x2000
|
|
#define RGEPHY_TEST_TX_JITTER_MASTER_MODE 0x4000
|
|
#define RGEPHY_TEST_TX_JITTER_SLAVE_MODE 0x6000
|
|
#define RGEPHY_TEST_TX_DISTORTION 0x8000
|
|
|
|
#define RGEPHY_MII_1000STS 0x0A /* 1000baseT status */
|
|
#define RGEPHY_1000STS_MSF 0x8000 /* Master/slave fault */
|
|
#define RGEPHY_1000STS_MSR 0x4000 /* Master/slave result */
|
|
#define RGEPHY_1000STS_LRS 0x2000 /* Local receiver status */
|
|
#define RGEPHY_1000STS_RRS 0x1000 /* Remote receiver status */
|
|
#define RGEPHY_1000STS_LPFD 0x0800 /* Link partner can FD */
|
|
#define RGEPHY_1000STS_LPHD 0x0400 /* Link partner can HD */
|
|
#define RGEPHY_1000STS_IEC 0x00FF /* Idle error count */
|
|
|
|
#define RGEPHY_MII_EXTSTS 0x0F /* Extended status */
|
|
#define RGEPHY_EXTSTS_X_FD_CAP 0x8000 /* 1000base-X FD capable */
|
|
#define RGEPHY_EXTSTS_X_HD_CAP 0x4000 /* 1000base-X HD capable */
|
|
#define RGEPHY_EXTSTS_T_FD_CAP 0x2000 /* 1000base-T FD capable */
|
|
#define RGEPHY_EXTSTS_T_HD_CAP 0x1000 /* 1000base-T HD capable */
|
|
|
|
/* RTL8211B(L)/RTL8211C(L) */
|
|
#define RGEPHY_MII_SSR 0x11 /* PHY Specific status register */
|
|
#define RGEPHY_SSR_S1000 0x8000 /* 1000Mbps */
|
|
#define RGEPHY_SSR_S100 0x4000 /* 100Mbps */
|
|
#define RGEPHY_SSR_S10 0x0000 /* 10Mbps */
|
|
#define RGEPHY_SSR_SPD_MASK 0xc000
|
|
#define RGEPHY_SSR_FDX 0x2000 /* full duplex */
|
|
#define RGEPHY_SSR_PAGE_RECEIVED 0x1000 /* new page received */
|
|
#define RGEPHY_SSR_SPD_DPLX_RESOLVED 0x0800 /* speed/duplex resolved */
|
|
#define RGEPHY_SSR_LINK 0x0400 /* link up */
|
|
#define RGEPHY_SSR_MDI_XOVER 0x0040 /* MDI crossover */
|
|
#define RGEPHY_SSR_ALDPS 0x0008 /* RTL8211C(L) only */
|
|
#define RGEPHY_SSR_JABBER 0x0001 /* Jabber */
|
|
|
|
#endif /* _DEV_RGEPHY_MIIREG_H_ */
|