freebsd-nq/sys/net80211/_ieee80211.h
Sam Leffler ca4ac7ae14 Add initial support for 900MHz cards like the Ubiquiti SR9:
o add channel flag to enable freq <-> ieee channel # mapping (can
  go away in the future when ieee number is precomputed)
o add mapping between 900mhz freq's and channel #'s that gives a
  unique channel # for each half/quarter/full width channel
o remove assumptions that half/quarter rate channels on happen in 11a
o remove assumptions that all 11g channels are full width
o ensure ic_curchan is reset on mode change so changing the channel
  list (e.g. on countrycode change) doesn't leave curchan set to an
  invalid channel

There is still an issue with switching rate sets; to be fixed separately.

MFC after:	1 month
2007-01-15 01:12:28 +00:00

208 lines
8.0 KiB
C

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211__IEEE80211_H_
#define _NET80211__IEEE80211_H_
enum ieee80211_phytype {
IEEE80211_T_DS, /* direct sequence spread spectrum */
IEEE80211_T_FH, /* frequency hopping */
IEEE80211_T_OFDM, /* frequency division multiplexing */
IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */
};
#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */
/* XXX not really a mode; there are really multiple PHY's */
enum ieee80211_phymode {
IEEE80211_MODE_AUTO = 0, /* autoselect */
IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */
IEEE80211_MODE_11B = 2, /* 2GHz, CCK */
IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */
IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */
IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */
IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */
};
#define IEEE80211_MODE_MAX (IEEE80211_MODE_TURBO_G+1)
enum ieee80211_opmode {
IEEE80211_M_STA = 1, /* infrastructure station */
IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */
IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */
IEEE80211_M_HOSTAP = 6, /* Software Access Point */
IEEE80211_M_MONITOR = 8 /* Monitor mode */
};
/*
* 802.11g protection mode.
*/
enum ieee80211_protmode {
IEEE80211_PROT_NONE = 0, /* no protection */
IEEE80211_PROT_CTSONLY = 1, /* CTS to self */
IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */
};
/*
* Authentication mode.
*/
enum ieee80211_authmode {
IEEE80211_AUTH_NONE = 0,
IEEE80211_AUTH_OPEN = 1, /* open */
IEEE80211_AUTH_SHARED = 2, /* shared-key */
IEEE80211_AUTH_8021X = 3, /* 802.1x */
IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */
/* NB: these are used only for ioctls */
IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */
};
/*
* Roaming mode is effectively who controls the operation
* of the 802.11 state machine when operating as a station.
* State transitions are controlled either by the driver
* (typically when management frames are processed by the
* hardware/firmware), the host (auto/normal operation of
* the 802.11 layer), or explicitly through ioctl requests
* when applications like wpa_supplicant want control.
*/
enum ieee80211_roamingmode {
IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */
IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */
IEEE80211_ROAMING_MANUAL= 2, /* application control */
};
/*
* Channels are specified by frequency and attributes.
*/
struct ieee80211_channel {
u_int16_t ic_freq; /* setting in Mhz */
u_int16_t ic_flags; /* see below */
};
#define IEEE80211_CHAN_MAX 255
#define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */
#define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */
#define IEEE80211_CHAN_ANYC \
((struct ieee80211_channel *) IEEE80211_CHAN_ANY)
/* bits 0-3 are for private use by drivers */
/* channel attributes */
#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */
#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */
#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */
#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */
#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */
#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */
#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */
#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */
#define IEEE80211_CHAN_GSM 0x1000 /* 900 MHz spectrum channel */
#define IEEE80211_CHAN_HALF 0x4000 /* Half rate channel */
#define IEEE80211_CHAN_QUARTER 0x8000 /* Quarter rate channel */
/*
* Useful combinations of channel characteristics.
*/
#define IEEE80211_CHAN_FHSS \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK)
#define IEEE80211_CHAN_A \
(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM)
#define IEEE80211_CHAN_B \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK)
#define IEEE80211_CHAN_PUREG \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM)
#define IEEE80211_CHAN_G \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN)
#define IEEE80211_CHAN_T \
(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
#define IEEE80211_CHAN_108G \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
#define IEEE80211_CHAN_ALL \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)
#define IEEE80211_CHAN_ALLTURBO \
(IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO)
#define IEEE80211_IS_CHAN_FHSS(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS)
#define IEEE80211_IS_CHAN_A(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A)
#define IEEE80211_IS_CHAN_B(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B)
#define IEEE80211_IS_CHAN_PUREG(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG)
#define IEEE80211_IS_CHAN_G(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G)
#define IEEE80211_IS_CHAN_ANYG(_c) \
(IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c))
#define IEEE80211_IS_CHAN_T(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_T) == IEEE80211_CHAN_T)
#define IEEE80211_IS_CHAN_108G(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G)
#define IEEE80211_IS_CHAN_2GHZ(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0)
#define IEEE80211_IS_CHAN_5GHZ(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0)
#define IEEE80211_IS_CHAN_OFDM(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_OFDM) != 0)
#define IEEE80211_IS_CHAN_CCK(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_CCK) != 0)
#define IEEE80211_IS_CHAN_GFSK(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0)
#define IEEE80211_IS_CHAN_HALF(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0)
#define IEEE80211_IS_CHAN_QUARTER(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0)
#define IEEE80211_IS_CHAN_FULL(_c) \
(((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0)
#define IEEE80211_IS_CHAN_GSM(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0)
/* ni_chan encoding for FH phy */
#define IEEE80211_FH_CHANMOD 80
#define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat))
#define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1)
#define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD)
/*
* 802.11 rate set.
*/
#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */
#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */
struct ieee80211_rateset {
u_int8_t rs_nrates;
u_int8_t rs_rates[IEEE80211_RATE_MAXSIZE];
};
#endif /* _NET80211__IEEE80211_H_ */